79

INT BA-400PERFS

BCI

CENTRIFUGAL MEDIUM PRESSURE FANS

ACCESSORIES

Inflatable slides and castles

SINGLE PHASE RANGE

MANUFACTURING FEATURES• Fully made of galvanised steel sheet.• Single inlet forward curved impeller in all models.• Portable box with anti-return valve.• Circular outlet for direct connection to duct or in-flatable input.• Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. Manufac-tured with standard voltages: 230V 50Hz.• Default assembly position is LG270.

APPLICATIONS• Inflatable slides and castles.• Industrial applications, air extraction or injection.• Maximum working temperature: carried air 130ºC; environment: single phase 50ºC, three phase 60ºC.

Code Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400

253250103 BCI 20/8 M2 1,1kW 2800 7,02 - 1,1 1300 60 27253260103 BCI 22/9 M2 1,1kW 2800 7,02 - 1,1 500 70 38253260120 BCI 22/9 M2 1,5kW 2800 9,44 - 1,5 1100 70 39253320103 BCI 25/10 M2 1,5kW 2800 9,44 - 1,5 700 75 45

80

MA

INT PERFS RA AC BA-400 SIL-C SIL-R

CENTRIFUGAL MEDIUM PRESSURE FANS

Radial aluminium impeller, steel sheet casing

SINGLE PHASE RANGE

THREE PHASE RANGE

ACCESSORIES

MANUFACTURING FEATURES• Rolling steel sheet housing.• Cast aluminium impeller.• Epoxy powder finishing coat.• Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. Manufac-tured with standard voltages: 230V 50Hz in single phase motors and 230/400V 50Hz in three phase motors.

APPLICATIONSDesigned for inline installation, they are suitable for:• Industrial applications, air extraction or injection.• Cooling of machines and parts. • Clean and slightly dusty air transport.

• Maximum working temperature: carried air 130ºC; environment: 60ºC.

UNDER REQUEST• 60Hz fans and special voltages.• 2 speed motors.

Code Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400

253180162 MA 18 M2 0,1kW 2760 0,81 - 0,09 295 60 6253220162 MA 24 M2 0,1kW 2760 0,81 - 0,09 350 65 7253270162 MA 25 M2 0,18kW 2800 1,48 - 0,18 560 68 11

Code Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400

253180161 MA 18 T2 0,1kW 2800 0,57 0,33 0,09 295 60 6253220161 MA 24 T2 0,1kW 2800 0,57 0,33 0,09 350 65 7253270161 MA 25 T2 0,18kW 2800 0,91 0,53 0,18 560 68 11

81

MA

INT PERFS RA AC BA-400 SIL-C SIL-R

CENTRIFUGAL MEDIUM PRESSURE FANS

Forward impeller, aluminium cast casing

SINGLE PHASE RANGE

THREE PHASE RANGE

ACCESSORIES

MANUFACTURING FEATURES• Cast aluminium housing.• Cast aluminium forward blades casing.• Epoxy powder finishing coat.• Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. Manufac-tured with standard voltages: 230V 50Hz in single phase motors and 230/400V 50Hz in three phase motors.

APPLICATIONSDesigned for inline installation, they are suitable for:• Industrial applications, air extraction or injection.

• Cooling of machines and parts. • Clean and slightly dusty air transport.• Maximum working temperature: carried air 130ºC; environment: 60ºC.

UNDER REQUEST• 60Hz fans and special voltages.• 2 speed motors.• Flameproof and explosionproof fans with• ATEX certified motors. See ATEX section.

Code Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400

253300104 MA 26 M2 0,37kW 2800 2,73 - 0,37 870 72 13

Code Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400 690

253300106 MA 26 T2 0,37kW 2800 1,65 0,95 - 0,37 870 71 13253330106 MA 27 T2 0,55kW 2800 2,33 1,35 - 0,55 1100 80 14253390106 MA 28 T2 1,1kW 2800 4,42 2,55 - 1,1 2150 80 20253440106 MA 31 T2 1,5kW 2800 6,01 3,48 - 1,5 2550 83 27

82

MDE

INT PEREG

CENTRIFUGAL MEDIUM PRESSURE FANS

Forward impeller, external rotor motor

SINGLE PHASE RANGE

ACCESSORIES

MANUFACTURING FEATURES• Welded rolled steel sheet housing .• Galvanised steel sheet single inlet forward curved impeller.• Inlet protection guard included.• Epoxy powder finishing coat.• Asynchronous external rotor with IP-44 protection and Class B insulation according to the DIN 40.050 h1 Standard; greased for life ball bearings. Stand-ard voltages: 230V 50Hz.

APPLICATIONSDesigned for inline installation, they are suitable for:• Industrial applications, air extraction or injection.• Cooling of machines and parts. • Clean air transport.• Maximum working temperature: 50ºC.

Code Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400

300712100 MDE 120 2930 0,4 - 0,065 189 60 2,4300712200 MDE 130 2890 0,5 - 0,12 396 61 3300712300 MDE 140 2890 0,97 - 0,18 504 63 3,3300712400 MDE 150 2900 1 - 0,24 600 64 3,4

83

MB

INT

BA-400

RFS

EI

PE

SIL-C

REG

AC

RA

SIL-R

MB 12/5 - 20/8

MB 22/9 - 28/11

MB 31/12 - 45/18

CENTRIFUGAL MEDIUM PRESSURE FANS

Forward impeller

ACCESSORIES

SINGLE PHASE RANGE

THREE PHASE RANGE

MANUFACTURING FEATURES• Rolling steel sheet housing.• Completely joined or welded housing.• Galvanised steel sheet and single inlet forward curved impeller.• Epoxy powder finishing coat.• Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. Manufac-tured with standard voltages: 230V 50Hz in single phase motors and 230/400V 50Hz in three phase motors up to 4kW, and 400/690V 50Hz for higher powers.

APPLICATIONSDesigned for inline installation, they are suitable for:• Industrial applications, air extraction or injection.• Cooling of machines and parts. • Clean air transport.• Maximum working temperature: carried air 130ºC; environment: single phase 50ºC, three phase 60ºC.

UNDER REQUEST• 60Hz fans and special voltages.• 2 speed motors.• Flameproof and explosionproof fans with ATEX certified motors. See ATEX section.• Fans for air working temperatures up to 250ºC.• Hot-dipped galvanised or stainless steel fans.• Fans provided with cooling disk for high tempera-tures.

-MB 12/5-20/8: 105€ additional cost.-MB 22/9-28/11: 115€ additional cost.-MB 31/12-45/18: 125€ additional cost.

Code Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400

253060103 MB 12/5 M2 0,1kW 2760 0,81 - 0,09 510 62 5253080103 MB 12/5 M4 0,08kW 1360 0,59 - 0,08 320 50 5253100103 MB 14/5 M2 0,25kW 2800 1,96 - 0,25 1050 59 7253110103 MB 16/6 M2 0,37kW 2800 2,73 - 0,37 1400 70 9,5253160103 MB 16/6 M4 0,18kW 1400 1,62 - 0,18 1100 57 9,5253170103 MB 18/7 M2 0,75kW 2800 5,15 - 0,75 1900 68 15253340103 MB 18/7 M4 0,25kW 1400 2,02 - 0,25 1200 63 10253240103 MB 20/6 M2 0,37kW 2800 2,73 - 0,37 880 68 14253190103 MB 20/8 M2 1,1kW 2800 7,02 - 1,1 2100 68 19253230103 MB 20/8 M4 0,37kW 1400 2,77 - 0,37 2200 60 15

Code Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400 690

253060106 MB 12/5 T2 0,1kW 2800 0,57 0,33 - 0,09 510 62 5253080106 MB 12/5 T4 0,08kW 1400 0,49 0,28 - 0,08 320 50 5253100106 MB 14/5 T2 0,25kW 2800 1,17 1,68 - 0,25 1050 59 7253110106 MB 16/6 T2 0,37kW 2800 1,65 0,95 - 0,37 1400 70 9,5253160106 MB 16/6 T4 0,18kW 1400 1,12 0,65 - 0,18 1100 57 9,5253170106 MB 18/7 T2 0,75kW 2800 3,03 1,75 - 0,75 1900 68 15253340106 MB 18/7 T4 0,25kW 1400 1,44 0,83 - 0,25 1200 63 10

84

MZ

INT BA-400RFS EIPE SIL-CREG ACRA SIL-R

UNDER REQUEST

CENTRIFUGAL MEDIUM PRESSURE FANS

Forward impeller, free shaft without motor

ACCESSORIES

MANUFACTURING FEATURES• Rolling steel sheet housing.• Completely joined or welded housing.• Galvanised steel sheet single inlet forward curved impeller.• Standard fan supplied with free shaft, i.e. without motor, pulleys or belts.• Epoxy powder finishing coat.

APPLICATIONSDesigned for inline installation, they are suitable for:• Industrial applications, air extraction or injection.• Cooling of machines and parts. • Clean air transport.• Maximum working temperature: carried air 200ºC; environment: 60ºC.

UNDER REQUEST• Fully equipped fans, including motor, pulleys, belts, belt and shaft guard. Mounted on a base plate or an upper plate. • Flameproof and explosionproof fans with ATEX certified motors.• Fans for air working temperatures up to 350ºC.• Hot-dipped galvanised or stainless steel fans.

Code Model R.P.M. max.Rated Power

máx. kWAir flowm3/h

P. máx.Ps (mm H2O)

WeightKg

254120160 MZ 22/9 3400 3 4000 220 18254180160 MZ 25/10 3000 4 5200 220 24254210160 MZ 28/11 2850 5,5 6900 230 27254230160 MZ 31/12 2425 7,5 8500 250 40254330160 MZ 35/14 1900 7,5 11000 200 56254370160 MZ 40/16 1650 11 14000 190 71254420160 MZ 45/18 1510 11 17000 200 85254540160 MZ 63/25 960 22 32000 180 115

Code Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400 690

253240106 MB 20/6 T2 0,37kW 2800 1,65 0,95 - 0,37 880 68 14253190106 MB 20/8 T2 1,1kW 2800 4,42 2,55 - 1,1 2100 68 19253230106 MB 20/8 T4 0,37kW 1400 1,94 1,12 - 0,37 2200 60 15253210120 MB 22/9 T2 1,1kW 2800 4,42 2,55 - 1,1 1800 70 24253200106 MB 22/9 T2 2,2kW 2800 8,61 4,98 - 2,2 3000 74 30253200120 MB 22/9 T4 0,55kW 1400 2,69 1,56 - 0,55 2700 60 22253280106 MB 25/10 T2 2,2kW 2800 8,61 4,98 - 2,2 2600 77 32253290106 MB 25/10 T2 3kW 2870 11,1 6,4 - 3 3200 78 38253310106 MB 25/10 T4 1,1kW 1400 4,74 2,75 - 1,1 3500 64 33253360106 MB 28/11 T2 4kW 2890 14,2 8,2 - 4 4000 81 46253370106 MB 28/11 T4 2,2kW 1430 8,06 5 - 2,2 5000 68 44253380106 MB 28/11 T6 0,75kW 910 4 2,3 - 0,75 3600 58 37253450120 MB 31/12 T4 3kW 1430 11,7 6,8 - 3 5700 72 57253450106 MB 31/12 T4 4kW 1440 15,2 8,8 - 4 6800 73 59253480106 MB 35/14 T4 3kW 1430 11,7 6,8 - 3 6000 78 63253480120 MB 35/14 T4 5,5kW 1440 - 12 6,9 5,5 9000 79 76253510121 MB 40/16 T4 5,5kW 1440 - 12 6,9 5,5 9000 78 101253510106 MB 40/16 T4 7,5kW 1440 - 15 8,6 7,5 11000 79 110253510120 MB 40/16 T6 2,2kW 940 9,7 5,6 - 2,2 7000 71 94253530106 MB 45/18 T4 5,5kW 1440 - 12 6,9 5,5 8000 80 116253530120 MB 45/18 T4 7,5kW 1440 - 15 8,6 7,5 11000 82 119253530121 MB 45/18 T4 11kW 1460 - 20,9 12,02 11 18000 86 190253560106 MB 45/18 T6 2,2kW 940 9,7 5,6 - 2,2 9000 76 112

85

MBCA

CENTRIFUGAL MEDIUM PRESSURE FANS

Forward impeller

THREE PHASE RANGE

MANUFACTURING FEATURES• Completely joined or welded rolling steel sheet housing.• Single inlet forward curved impeller in galvanised sheet.• Epoxy powder finishing coat.• Squirrel cage asynchronous standard motor, IP-55 protection and rated class F insulation. Standard voltages 230/400V 50Hz up to 4kW, and 400/690V 50Hz for higher powers.

APPLICATIONSDesigned for inline installation, they are suitable for:• Industrial applications, air extraction or injection.

• Cooling of machines and parts. • Clean air transport.• Maximum working temperature: carried air 130ºC; environment 60ºC.

UNDER REQUEST• 60Hz fans and special voltages.• 2 speed motors.• Flameproof or explosionproof fans with ATEX cer-tified motors.• Fans for air working high temperatures.• Hot-dipped galvanised or stainless steel fans.

Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400 690

MBCA 180 T2 0,55kW 2800 2,33 1,35 - 0,55 1190 74 18MBCA 180 T2 1,1kW 2800 4,42 2,55 - 1,1 1900 76 21MBCA 200 T2 1,1kW 2800 4,42 2,55 - 1,1 1700 78 30MBCA 200 T2 2,2kW 2800 8,61 4,98 - 2,2 3050 79 37MBCA 220 T2 1,5kW 2800 6,01 3,48 - 1,5 2150 80 36MBCA 220 T2 3kW 2870 11,1 6,4 - 3 3850 81 47MBCA 250 T2 3kW 2870 11,1 6,4 - 3 3450 87 49MBCA 280 T2 5,5kW 2900 - 11 6,3 5,5 4750 89 72MBCA 280 T2 11kW 2930 - 19,8 11,39 11 7650 90 78MBCA 220 T4 0,18kW 1400 1,12 0,65 - 0,18 1080 63 28MBCA 220 T4 0,37kW 1400 1,94 1,12 - 0,37 1900 63 30MBCA 250 T4 0,25kW 1400 1,44 0,83 - 0,25 1330 64 34MBCA 250 T4 0,55kW 1400 2,69 1,56 - 0,55 2400 66 37MBCA 280 T4 0,55kW 1400 2,69 1,56 - 0,55 2150 68 42MBCA 280 T4 0,75kW 1400 3,48 2,01 - 11 3050 70 44MBCA 280 T4 1,1kW 1400 4,74 2,75 - 1,1 3850 70 46MBCA 310 T4 1,1kW 1400 4,74 2,75 - 1,1 3050 73 57MBCA 310 T4 1,5kW 1400 6,31 3,65 - 1,5 4250 74 60MBCA 310 T4 2,2kW 1430 8,06 5 - 2,2 6150 74 62MBCA 350 T4 2,2kW 1430 8,06 5 - 2,2 4750 76 76MBCA 350 T4 3kW 1430 11,7 6,8 - 3 6150 77 78MBCA 350 T4 4kW 1440 15,2 8,8 - 4 8500 78 87MBCA 400 T4 4kW 1440 15,2 8,8 - 4 7650 81 109MBCA 400 T4 5,5kW 1440 - 12 6,9 5,5 9500 82 98MBCA 400 T4 7,5kW 1440 - 15 8,6 7,5 12000 82 119MBCA 450 T4 11kW 1460 - 20,9 12,02 11 12000 83 129MBCA 450 T4 15kW 1460 - 27,9 16,04 15 19000 85 168MBCA 500 T4 15kW 1460 - 27,9 16,04 15 17000 87 187MBCA 500 T4 22kW 1470 - 38,5 22,14 22 24200 89 227MBCA 560 T4 22kW 1470 - 38,5 22,14 22 21600 89 236MBCA 560 T4 37kW 1475 - 66,7 38,35 37 34200 90 382MBCA 310 T6 0,37kW 900 2,13 1,23 - 0,37 2400 63 50MBCA 310 T6 0,55kW 900 2,85 1,65 - 0,55 3850 64 53MBCA 350 T6 0,75kW 910 4 2,3 - 0,75 4250 66 70MBCA 350 T6 1,1kW 910 5,5 3,2 - 1,1 5400 68 72MBCA 400 T6 1,5kW 940 6,9 4 - 1,5 6150 68 93MBCA 400 T6 2,2kW 940 9,7 5,6 - 2,2 8500 71 99MBCA 450 T6 3kW 960 12,4 7,2 - 3 9500 73 114MBCA 450 T6 4kW 960 16,3 9,4 - 4 12000 74 130MBCA 500 T6 4kW 960 16,3 9,4 - 4 10800 78 174MBCA 500 T6 7,5kW 965 - 16,1 9,26 7,5 17000 80 187MBCA 560 T6 7,5kW 965 - 16,1 9,26 7,5 15300 81 199MBCA 560 T6 11kW 970 - 22,4 12,88 11 21600 82 212

86

MBC/FA

INT PERFS BA-400AC SIL-CEI SIL-R

CENTRIFUGAL MEDIUM PRESSURE FANS

Forward impeller, cubic casing

ACCESSORIES

SINGLE PHASE RANGE

THREE PHASE RANGE

MANUFACTURING FEATURES• Reinforced rolling steel sheet housings completely welded (internally and externally) with epoxy powder finishing coat.• Forward curved reinforced impeller.• Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. Manufactured with standard voltages: 230V 50Hz in single phase motors and 230/400V 50Hz in three phase motors up to 4kW, and 400/690V 50Hz for higher powers.

APPLICATIONSDesigned for inline installation, they are suitable for:• Smoke emergency exhaust with motor outside the hazardous area.• Hot air exhaust in ovens or facilities with high tem-

peratures.• Clean air transport.• Maximum working temperature: carried air up to 250ºC; environment: single phase 50ºC, three phase 60ºC.

UNDER REQUEST• Drain plug and inspection door.• 60Hz fans and special voltages.• Hot air transport.• 2 speed motors.

Code ModelR.P.M. max.

Max. Curr. (A)Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg

253310173 MBC/FA 25/10 M4 1,1kW 1400 7,45 1,1 3500 70 63253300173 MBC/FA 25/10 M6 0,55kW 900 3,84 0,55 1900 62 61253380173 MBC/FA 28/11 M6 0,75kW 900 4,97 0,75 3600 60 67

Code ModelR.P.M. max.

Max. Curr. (A) Rated PowerkW

Air flowm3/h

SounddB (A)

WeightKg230 400 690

253310186 MBC/FA 25/10 T4 1,1kW 1400 4,74 2,75 - 1,1 3500 70 64253300186 MBC/FA 25/10 T6 0,55kW 900 2,85 1,65 - 0,55 1900 62 63253360186 MBC/FA 28/11 T2 4kW 2890 14,2 8,2 - 4 4000 81 66253370186 MBC/FA 28/11 T4 2,2kW 1430 8,06 5 - 2,2 5000 82 75253380186 MBC/FA 28/11 T6 0,75kW 910 4 2,3 - 0,75 3600 60 69253460186 MBC/FA 31/12 T4 3kW 1430 11,7 6,8 - 3 5700 72 72253450186 MBC/FA 31/12 T4 4kW 1440 15,2 8,8 - 4 6800 73 73253430186 MBC/FA 31/12 T6 1,5kW 940 6,9 4 - 1,5 4500 66 71253480186 MBC/FA 35/14 T4 3kW 1430 11,7 6,8 - 3 6000 78 75253490186 MBC/FA 35/14 T4 5,5kW 1440 - 12 6,9 5,5 8700 79 79253470186 MBC/FA 35/14 T6 1,5kW 940 6,9 4 - 1,5 5500 70 73253510186 MBC/FA 40/16 T4 5,5kW 1440 - 12 6,9 5,5 9000 78 87253520186 MBC/FA 40/16 T4 7,5kW 1440 - 15 8,6 7,5 10500 79 89253500186 MBC/FA 40/16 T6 2,2kW 940 9,7 5,6 - 2,2 7000 71 86253530186 MBC/FA 45/18 T4 5,5kW 1440 - 12 6,9 5,5 8000 80 91253540186 MBC/FA 45/18 T4 7,5kW 1440 - 15 8,6 7,5 11000 82 93253560186 MBC/FA 45/18 T6 2,2kW 940 9,7 5,6 - 2,2 9000 76 90

87

INT PERFS BA-400AC SIL-C SIL-R

MA P/R

CENTRIFUGAL MEDIUM PRESSURE FANS

ACCESSORIES

Radial impeller, aluminium cast

THREE PHASE RANGE

MANUFACTURING FEATURES• Cast aluminium housing.• Straight blade steel sheet or cast aluminium im-pellers.• Epoxy powder finishing coat.• Squirrel cage asynchronous standard motor, IP-55 protection and rated class F insulation. Standard voltages 230/400V 50Hz.

APPLICATIONSDesigned for inline installation, they are suitable for:• Solid material transport (except for textile fibers).• Maximum working temperature: carried air 130ºC; environment: 60ºC.

UNDER REQUEST• 60Hz fans and special voltages.• 2 speed motors.• Flameproof or explosionproof fans with ATEX cer-tified motors.

Code Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400

253300160 MA 26 T2 0,37kW P/R 2800 1,65 0,95 0,37 700 75 14300006000 MA 27 T2 0,55kW P/R 2800 2,33 1,35 0,55 850 80 16300140600 MA 28 T2 0,75kW P/R 2800 3,03 1,75 0,75 1400 81 21300032600 MA 31 T2 1,5kW P/R 2800 6,01 3,48 1,5 1800 83 25

88

MB P/R

INT PERFS BA-400AC SIL-CEI SIL-R

CENTRIFUGAL MEDIUM PRESSURE FANS

Radial impeller

ACCESSORIES

THREE PHASE RANGE

MANUFACTURING FEATURES• Rolled steel sheet housing.• Single inlet straight blade impeller manufactured in steel sheet and with reinforced with a welded ring protected with epoxy powder finishing coat.• Epoxy powder finishing coat.• Standard asynchronous squirrel-cage motor with IP-55 protection and rated class F insulation. Manu-factured with standard voltages 230V 50Hz for single phase motors and 230/400V 50Hz in three phase motors up to 4kW, and 400/690V 50Hz for higher powers.

APPLICATIONSDesigned for inline installation, they are suitable for:• Solid material transport (except for textile fibers).• Maximum working temperature: carried air 130ºC; environment: 60ºC.

UNDER REQUEST• 60Hz fans and special voltages.• 2 speed motors.• Flameproof and explosionproof fans with ATEX certified motors.• Hot-dipped galvanised or stainless steel fans.• Fans provided with cooling disk for high tempera-tures. 120€ additional cost.• Fans for air working temperatures up to 250ºC.

Code Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400 690

253210160 MB 22/9 T2 1,1kW P/R 2800 4,42 2,55 - 1,1 2100 70 23253280160 MB 25/10 T2 1,5kW P/R 2800 6,01 3,48 - 1,5 2850 74 31253360161 MB 28/11 T2 2,2kW P/R 2800 8,61 4,98 - 2,2 4500 76 40253450160 MB 31/12 T2 3kW P/R 2870 11,1 6,4 - 3 5300 79 55253480161 MB 35/14 T2 5,5kW P/R 2900 - 11 6,3 5,5 7800 84 85253510160 MB 40/16 T2 7,5kW P/R 2900 - 15 8,6 7,5 9500 90 103253530160 MB 45/18 T2 11kW P/R 2930 - 19,8 11,39 11 10500 92 180253530161 MB 45/18 T2 15kW P/R 2930 - 26,6 15,3 15 12500 95 191

89

INT PERFS BA-400AC SIL-C SIL-R

MBZM P/R

EI

CENTRIFUGAL MEDIUM PRESSURE FANS

ACCESSORIES

Radial impeller

THREE PHASE RANGE

MANUFACTURING FEATURES• Rolled steel sheet housing.• Fully welded and reinforced housing.• Single inlet straight blade impeller manufactured in steel sheet with epoxy powder finishing coat.• Epoxy powder finishing coat.• Standard asynchronous squirrel-cage motor with IP-55 protection and rated class F insulation. Stand-ard voltages 230V 50Hz for single phase motors, 230/400V 50Hz for three phase, motors up to 4kW and 400/690V 50Hz for higher powers.

APPLICATIONSDesigned for inline installation, they are suitable for:• Solid material and textile fibers transport.• Maximum working temperature: carried air 130ºC; environment: 60ºC.

UNDER REQUEST• 60Hz fans and special voltages.• 2 speed motors.• Flameproof or explosionproof fans with ATEX cer-tified motors.• Fan for air working temperatures up to 250ºC.• Hot-dipped galvanised or stainless steel fans.

Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400 690

MBZM 220 T2 0,37kW P/R 2800 1,65 0,95 - 0,37 1116 69 11MBZM 251 T2 0,55kW P/R 2800 2,33 1,35 - 0,55 1116 71 26MBZM 252 T2 0,75kW P/R 2800 3,03 1,75 - 0,75 1548 72 29MBZM 281 T2 1,1kW P/R 2800 4,42 2,55 - 1,1 1548 73 33MBZM 282 T2 1,5kW P/R 2800 6,01 3,48 - 1,5 2196 74 37MBZM 311 T2 1,5kW P/R 2800 6,01 3,48 - 1,5 2196 76 43MBZM 312 T2 2,2kW P/R 2800 8,61 4,98 - 2,2 3096 77 46MBZM 351 T2 3kW P/R 2870 11,1 6,4 - 3 3096 79 74MBZM 352 T2 4kW P/R 2890 14,2 8,2 - 4 4320 80 80MBZM 401 T2 5,5kW P/R 2900 - 11 6,3 5,5 4320 83 109MBZM 402 T2 7,5kW P/R 2900 - 15 8,6 7,5 6120 84 115MBZM 452 T2 11kW P/R 2930 - 19,8 11,39 11 8280 87 198MBZM 501 T2 15kW P/R 2930 - 26,6 15,3 15 8280 90 222MBZM 502 T2 22kW P/R 2940 - 39 22,43 22 11880 91 274MBZM 454 T4 1,5kW P/R 1400 6,31 3,65 - 1,5 4320 71 106MBZM 503 T4 2,2kW P/R 1430 8,06 5 - 2,2 4320 72 126MBZM 504 T4 3kW P/R 1430 11,7 6,8 - 3 6120 74 134MBZM 561 T4 4kW P/R 1440 15,2 8,8 - 4 6120 75 148MBZM 562 T4 5,5kW P/R 1440 - 12 6,9 5,5 8280 76 175MBZM 631 T4 7,5kW P/R 1440 - 15 8,6 7,5 8280 78 200MBZM 632 T4 11kW P/R 1460 - 20,9 12,02 11 11880 80 274MBZM 711 T4 11kW P/R 1460 - 20,9 12,02 11 11880 83 338MBZM 712 T4 15kW P/R 1460 - 27,9 16,04 15 16920 84 368MBZM 801 T4 18,5kW P/R 1465 - 33 18,98 18,5 16920 85 443MBZM 802 T4 30kW P/R 1475 - 53,2 30,59 30 23760 87 509MBZM 901 T4 37kW P/R 1475 - 66,7 38,35 37 23760 90 598MBZM 902 T4 45kW P/R 1475 - 78,6 45,2 45 33840 92 638MBZM 1001 T4 60kW P/R 1480 - 96,2 55,32 55 33840 96 800MBZM 1002 T4 75kW P/R 1480 - 130 74,75 75 46800 97 918

90

MBR

INT PERFS BA-400 SIL-C SIL-REIAC

CENTRIFUGAL MEDIUM PRESSURE FANS

Backward impeller

ACCESSORIES

THREE PHASE RANGE

MANUFACTURING FEATURES• Reinforced rolling steel sheet housings with epoxy powder coat finishing.• Reinforced high efficiency backward curved im-peller.• Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. Manufac-tured with standard voltages: 230/400V 50Hz in three phase motors up to 4kW, and 400/690V 50Hz for higher powers.

APPLICATIONSDesigned for inline installation, they are suitable for:• Industrial applications, air extraction or injection.• Cooling of machines and parts. • Clean and slightly dusty air transport.• Exhaust after filters, separators and cyclones.• Pneumatic transport.• Maximum working temperature: carried air 130ºC; environment: 60ºC.

UNDER REQUEST• 60Hz fans and special voltages.• 2 speed motor.• Flameproof and explosionproof fans with ATEX certified motors.• Fans for air working temperatures up to 250ºC.• Hot-dipped galvanised or stainless steel fans.

Code ModelR.P.M. max.

Max. Curr. (A) Rated PowerkW

Air flowm3/h

SounddB (A)

WeightKg230 400 690

243310106 MBR 31/10 T2 1,1kW 2800 4,42 2,55 - 1,1 4800 81 55243350106 MBR 35/11 T2 2,2kW 2800 8,61 4,98 - 2,2 6660 85 67243410106 MBR 40/12 T2 3kW 2870 11,1 6,4 - 3 8500 88 82243400106 MBR 40/12 T4 0,75kW 1400 3,48 2,01 - 0,75 5640 73 71243450106 MBR 45/14 T4 1,1kW 1400 4,74 2,75 - 1,1 7200 76 90243510106 MBR 50/16 T4 1,5kW 1400 6,31 3,65 - 1,5 9500 81 74243500106 MBR 50/16 T6 0,75kW 910 4 2,3 - 0,75 7100 71 69243570106 MBR 56/18 T4 3kW 1430 11,7 6,8 - 3 13500 83 97243560106 MBR 56/18 T6 1,5kW 940 6,9 4 - 1,5 9500 73 89243650106 MBR 63/20 T4 5,5kW 1440 - 12 6,9 5,5 19000 84 155243640106 MBR 63/20 T6 1,5kW 940 6,9 4 - 1,5 12000 76 113243630106 MBR 63/20 T8 1,1kW 710 5,54 3,2 - 1,1 8940 68 102243730106 MBR 71/22 T4 7,5kW 1440 - 15 8,6 7,5 25500 87 256243720106 MBR 71/22 T6 3kW 960 12,4 7,2 - 3 17000 77 205243710106 MBR 71/22 T8 1,5kW 710 7,45 4,3 - 1,5 12440 70 180

91

MBRC/FA

INT PERFS BA-400 SIL-CEI SIL-RAC

CENTRIFUGAL MEDIUM PRESSURE FANS

ACCESSORIES

SINGLE PHASE RANGE

THREE PHASE RANGE

Backward impeller, cubic casing

MANUFACTURING FEATURES• Reinforced rolling steel sheet housings completely welded (internally and externally) with epoxy pow-der finishing coat.• Reinforced high efficiency backward curved im-peller.• Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. Manufac-tured with standard voltages: 230V in single phase motors and 230/400V 50Hz in three phase motors up to 4kW, and 400/690V 50Hz for higher powers.

APPLICATIONSDesigned for inline installation, they are suitable for:• Smoke emergency exhaust with motor outside the hazardous area.

• Hot air exhaust in ovens or facilities with high tem-peratures.• Clean and slightly dusty air transport.• Maximum working temperature: carried air up to 250ºC; environment: single phase 50ºC, three phase 60ºC.

UNDER REQUEST• Drain plug and inspection door.• 60Hz fans and special voltages.• Hot air transport.• 2 speed motors.

Code ModelR.P.M. max.

Max. Curr. (A)

Rated PowerkW

Air flowm3/h

SounddB (A)

WeightKg

243400173 MBRC/FA 40/12 M4 0,75kW 1400 5,45 0,75 5640 72 71243450173 MBRC/FA 45/14 M4 1,1kW 1400 7,45 1,1 7000 73 90243510173 MBRC/FA 50/16 M4 1,5kW 1400 9,83 1,5 9500 76 74243500173 MBRC/FA 50/16 M6 0,75kW 910 4,97 0,75 7100 70 69

Code ModelR.P.M. max.

Max. Curr. (A) Rated PowerkW

Air flowm3/h

SounddB (A)

WeightKg230 400 690

243410186 MBRC/FA 40/12 T2 3kW 2870 11,1 6,4 - 3 8500 85 82243400186 MBRC/FA 40/12 T4 0,75kW 1400 3,48 2,01 - 0,75 5640 72 71243450186 MBRC/FA 45/14 T4 1,1kW 1400 4,74 2,75 - 1,1 7000 73 90243510186 MBRC/FA 50/16 T4 1,5kW 1400 6,31 3,65 - 1,5 9500 76 74243500186 MBRC/FA 50/16 T6 0,75kW 910 4 2,3 - 0,75 7100 70 69243570186 MBRC/FA 56/18 T4 3kW 1430 11,7 6,8 - 3 13500 80 97243560186 MBRC/FA 56/18 T6 1,5kW 940 6,9 4 - 1,5 9500 70 89243650186 MBRC/FA 63/20 T4 5,5kW 1440 - 12 6,9 5,5 19000 83 155243640186 MBRC/FA 63/20 T6 1,5kW 940 6,9 4 - 1,5 12000 72 113243730186 MBRC/FA 71/22 T4 7,5kW 1440 - 15 8,6 7,5 25500 85 256243720186 MBRC/FA 71/22 T6 3kW 960 12,4 7,2 - 3 17000 77 205

92

INT PERFS BA-400 SIL-C SIL-R

MBRL

EIAC

CENTRIFUGAL MEDIUM PRESSURE FANS

ACCESSORIES

Backward impeller

MANUFACTURING FEATURES• Rolling steel sheet housing.• Fully welded or joined housing.• High efficiency single inlet backward curved im-peller, manufactured in rolled steel sheet and epoxy powder finishing coat.• Epoxy powder finishing coat.• Standard asynchronous squirrel-cage motor with IP-55 protection and rated class F insulation. Stand-ard voltages 230V 50Hz for single phase motors, 230/400V 50Hz for three phase, motors up to 4kW and 400/690V 50Hz for higher powers.

APPLICATIONSDesigned for inline installation, they are suitable for:• Industrial applications, air extraction or injection.• Cooling of machines and parts.

• Clean and slightly dusty air transport.• Exhaust after filters, separators and cyclones.• Pneumatic transport.• Maximum working temperature: carried air 130ºC; environment: 60ºC.

UNDER REQUEST• 60Hz fans and special voltages.• 2 speed motors.• Flameproof or explosionproof fans with ATEX cer-tified motors.• Fans for air working temperatures up to 250ºC. • Hot-dipped galvanised or stainless steel fans.• Special motors for frequency regulation (recom-mended for motor sizes IEC280 and larger).

93

CENTRIFUGAL MEDIUM PRESSURE FANS

THREE PHASE RANGE

Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400 690

MBRL 250 T2 0,55kW 2800 2,33 1,35 - 0,55 2700 70 33MBRL 280 T2 1,1kW 2800 4,42 2,55 - 1,1 3850 72 43MBRL 311 T2 2,2kW 2800 8,61 4,98 - 2,2 5400 76 52MBRL 351 T2 3kW 2870 11,1 6,4 - 3 7650 79 80MBRL 401 T2 4kW 2890 14,2 8,2 - 4 9500 82 95MBRL 402 T2 5,5kW 2900 - 11 6,3 5,5 12000 84 108MBRL 451 T2 7,5kW 2900 - 15 8,6 7,5 13500 86 124MBRL 452 T2 11kW 2930 - 19,8 11,39 11 17000 88 160MBRL 501 T2 15kW 2930 - 26,6 15,3 15 19000 89 187MBRL 502 T2 18,5kW 2935 - 32 18,4 18,5 24200 92 196MBRL 312 T4 0,18kW 1400 1,12 0,65 - 0,18 2700 57 42MBRL 352 T4 0,37kW 1400 1,94 1,12 - 0,37 3850 60 65MBRL 403 T4 0,55kW 1400 2,69 1,56 - 0,55 5400 64 75MBRL 453 T4 0,75kW 1400 3,48 2,01 - 0,75 6850 65 89MBRL 454 T4 1,1kW 1400 4,74 2,75 - 1,1 7650 67 94MBRL 503 T4 1,5kW 1400 6,31 3,65 - 1,5 9500 69 123MBRL 504 T4 2,2kW 1430 8,06 5 - 2,2 10800 71 129MBRL 561 T4 3kW 1430 11,7 6,8 - 3 13500 72 141MBRL 562 T4 4kW 1440 15,2 8,8 - 4 17000 74 146MBRL 631 T4 5,5kW 1440 - 12 6,9 5,5 19000 75 190MBRL 632 T4 7,5kW 1440 - 15 8,6 7,5 24200 78 204MBRL 711 T4 11kW 1460 - 20,9 12,02 11 27000 79 315MBRL 712 T4 15kW 1460 - 27,9 16,04 15 34200 82 326MBRL 801 T4 18,5kW 1465 - 33 18,98 18,5 38200 83 402MBRL 802 T4 22kW 1470 - 38,5 22,14 22 47500 85 418MBRL 901 T4 37kW 1475 - 66,7 38,35 37 54000 86 630MBRL 902 T4 45kW 1475 - 78,6 45,2 45 68500 88 650MBRL 1001 T4 55kW 1480 - 96,2 55,32 55 76500 90 832MBRL 802 T4 75kW 1480 - 130 74,75 75 95400 93 941MBRL 505 T6 0,37kW 900 2,13 1,23 - 0,37 6150 57 115MBRL 506 T6 0,55kW 900 2,85 1,65 - 0,55 6850 59 116MBRL 563 T6 0,75kW 910 4 2,3 - 0,75 8500 60 131MBRL 564 T6 1,1kW 910 5,5 3,2 - 1,1 9000 62 133MBRL 633 T6 1,5kW 940 6,9 4 - 1,5 12000 66 173MBRL 634 T6 2,2kW 940 9,7 5,6 - 2,2 15300 68 179MBRL 713 T6 3kW 960 12,4 7,2 - 3 17000 69 276MBRL 714 T6 4kW 960 16,3 9,4 - 4 21600 72 286MBRL 803 T6 5,5kW 960 - 12,42 7,17 5,5 24200 73 330MBRL 804 T6 7,5kW 965 - 16,1 9,26 7,5 30600 75 368MBRL 903 T6 11kW 970 - 22,4 12,88 11 34200 76 500MBRL 904 T6 15kW 970 - 29,4 16,91 15 42500 78 499MBRL 1003 T6 18,5kW 975 - 34,8 20,01 18,5 47500 80 697MBRL 1004 T6 22kW 975 - 41,4 23,81 22 61000 82 716MBRL 1121 T6 30kW 980 - 55,4 31,86 30 68500 83 1071MBRL 1122 T6 37kW 980 - 67,4 38,76 37 85000 85 1212MBRL 1251 T6 55kW 980 - 97 55,78 55 95400 86 1475MBRL 1252 T6 75kW 985 - 133,5 76,76 75 120600 88 1596

94

INT PE RARFS BA-400CP SIL-C SIL-REI

MBRLP

AC

CENTRIFUGAL MEDIUM PRESSURE FANS

ACCESSORIES

Centrifugal medium pressure fan for paint booths

THREE PHASE RANGE

MANUFACTURING FEATURES• Rolling steel sheet housing.• Fully welded or joined housing.• Flanged inlet to allow direct join in the paint shop outlet.• Inspection door included.• Cabin fans supplied, if requested, with spark-proof inlet.• High efficiency single inlet and backward curved impeller manufactured in rolled steel sheet with epoxy powder finishing coat.• Epoxy powder finishing coat.• Standard asynchronous squirrel-cage mo-tor with IP-55 protection and Class F insulation. Manufactured with standard voltages: 230/400V 50Hz in three phase motors up to 4kW, and 400/690V 50Hz for higher powers.

APPLICATIONSDesigned to be fixed at the inlet double flange, with motor in vertical position.

• Industrial applications, air extraction or injection.• Cooling of machines and parts. • Clean and slightly dusty air transport.• Exhaust after filters in paint booths.• Exhaust after filters, separators and cyclones.• Pneumatic transport.• Maximum working temperature: carried air 130ºC; environment: 60ºC.

UNDER REQUEST• 60Hz fans and special voltages.• 2 speed motor.• Flameproof or explosionproof fans with ATEX cer-tified motors.• Hot-dipped galvanised or stainless steel fans.

Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400 690

MBRLP 454 T4 1,1kW 1400 4,74 2,75 - 1,1 7650 69 54MBRLP 503 T4 1,5kW 1400 6,31 3,65 - 1,5 9500 71 75MBRLP 561 T4 3kW 1430 11,7 6,8 - 3 13500 74 94MBRLP 562 T4 4kW 1440 15,2 8,8 - 4 17000 76 98MBRLP 631 T4 5,5kW 1440 - 12 6,9 5,5 19000 77 104MBRLP 632 T4 7,5kW 1440 - 15 8,6 7,5 24200 80 112MBRLP 633 T6 1,5kW 940 6,9 4 - 1,5 12000 68 92MBRLP 634 T6 2,2kW 940 9,7 5,6 - 2,2 15300 70 95MBRLP 713 T6 3kW 960 12,4 7,2 - 3 17000 71 107MBRLP 714 T6 4kW 960 16,3 9,4 - 4 21600 74 113

95

INT PE RARFS BA-400 SIL-C SIL-REI

MBRM

AC

CENTRIFUGAL MEDIUM PRESSURE FANS

ACCESSORIES

Backward impeller, dusty air

THREE PHASE RANGE

MANUFACTURING FEATURES• Rolling steel sheet housing.• Fully welded or joined housing.• High efficiency single inlet and backward curved impeller, manufactured in rolled steel sheet and epoxy powder finishing coat.• Epoxy powder finishing coat.• Standard asynchronous squirrel-cage motor with IP-55 protection and rated class F insulation. Manu-factured with standard voltages: 230V 50Hz for sin-gle phase motors, 230/400V 50Hz for three phase, motors up to 4kW and 400/690V 50Hz for higher powers.

APPLICATIONSDesigned for inline installation, they are suitable for:• Industrial applications, air extraction or injection.• Cooling of machines and parts.

• Transport of dusty air and small loads of pellet materials.• Exhaust after filters, separators and cyclones.• Pneumatic transport.• Maximum working temperature: carried air 130ºC; environment: 60ºC.

UNDER REQUEST• 60Hz fans and special voltages.• 2 speed motors.• Flameproof or explosionproof fans with ATEX cer-tified motors.• Fans for air working temperatures up to 250ºC. • Hot-dipped galvanised or stainless steel fans.• Special motors for frequency regulation (recom-mended for motor sizes IEC280 and larger).

Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400 690

MBRM 220 T2 0,18kW 2800 0,91 0,53 - 0,18 830 64 18MBRM 251 T2 0,25kW 2800 1,17 1,68 - 0,25 1330 65 24MBRM 252 T2 0,37kW 2800 1,65 0,95 - 0,37 1330 67 26MBRM 281 T2 0,55kW 2800 2,33 1,35 - 0,55 1900 69 30MBRM 282 T2 0,75kW 2800 3,03 1,75 - 0,75 1900 70 32MBRM 311 T2 1,1kW 2800 4,42 2,55 - 1,1 2700 72 41MBRM 312 T2 1,5kW 2800 6,01 3,48 - 1,5 2700 73 44MBRM 351 T2 1,5kW 2800 6,01 3,48 - 1,5 3850 76 66MBRM 352 T2 2,2kW 2800 8,61 4,98 - 2,2 3850 78 69MBRM 401 T2 3kW 2870 11,1 6,4 - 3 6150 80 107MBRM 402 T2 4kW 2890 14,2 8,2 - 4 6150 81 110MBRM 451 T2 5,5kW 2900 - 11 6,3 5,5 8500 84 150MBRM 452 T2 7,5kW 2900 - 15 8,6 7,5 8500 85 158MBRM 501 T2 11kW 2930 - 19,8 11,39 11 12000 89 235MBRM 502 T2 15kW 2930 - 26,6 15,3 15 12000 89 247MBRM 561 T2 18,5kW 2935 - 32 18,4 18,5 15300 91 286MBRM 562 T2 22kW 2940 - 39 22,43 22 15300 92 316MBRM 503 T4 1,1kW 1400 4,74 2,75 - 1,1 5400 68 132MBRM 504 T4 1,5kW 1400 6,31 3,65 - 1,5 5400 69 135MBRM 563 T4 2,2kW 1430 8,06 5 - 2,2 8500 71 140MBRM 564 T4 3kW 1430 11,7 6,8 - 3 8500 72 144MBRM 631 T4 4kW 1440 15,2 8,8 - 4 12000 75 178MBRM 632 T4 5,5kW 1440 - 12 6,9 5,5 12000 78 191MBRM 711 T4 7,5kW 1440 - 15 8,6 7,5 17000 79 285MBRM 712 T4 11kW 1460 - 20,9 12,02 11 17000 81 308MBRM 801 T4 15kW 1460 - 27,9 16,04 15 24200 83 400MBRM 802 T4 18,5kW 1465 - 33 18,98 18,5 24200 84 430MBRM 901 T4 30kW 1475 - 53,2 30,59 30 34200 86 580MBRM 902 T4 37kW 1475 - 66,7 38,35 37 34200 87 620MBRM 1001 T4 45kW 1475 - 78,6 45,2 45 47500 90 760MBRM 1002 T4 55kW 1480 - 96,2 55,32 55 42500 91 830MBRM 1121 T4 75kW 1480 - 130 74,75 75 68500 93 1220MBRM 1122 T4 90kW 1485 - 154,8 89,01 90 68500 94 1257MBRM 803 T6 4kW 960 16,3 9,4 - 4 15300 73 330MBRM 804 T6 5,5kW 960 - 12,42 7,17 5,5 15300 74 340MBRM 903 T6 7,5kW 965 - 16,1 9,26 7,5 21600 76 465MBRM 904 T6 11kW 970 - 22,4 12,88 11 21600 77 495MBRM 1003 T6 15kW 970 - 29,4 16,91 15 30600 79 652MBRM 1004 T6 18,5kW 975 - 34,8 20,01 18,5 30600 80 679MBRM 1123 T6 22kW 975 - 41,4 23,81 22 42500 82 995MBRM 1124 T6 30kW 980 - 55,4 31,86 30 42500 83 1043MBRM 1251 T6 37kW 980 - 67,4 38,76 37 61000 86 1330MBRM 1252 T6 45kW 980 - 80,6 46,35 45 61000 87 1405

96

MBRU

INT PE RARFS BA-400 SIL-C SIL-REIAC

CENTRIFUGAL MEDIUM PRESSURE FANS

Backward impeller, dusty air, large pressures

THREE PHASE RANGE

ACCESSORIES

MANUFACTURING FEATURES• Rolling steel sheet housing.• Fully welded or joined housing.• High efficiency single inlet and backward curved impeller manufactured in rolling steel sheet with epoxy powder finishing coat.• Epoxy powder finishing coat.• Standard asynchronous squirrel-cage motor with IP-55 protection and rated class F insulation. Manu-factured with standard voltages: 230V 50Hz for sin-gle phase motors, 230/400V 50Hz for three phase motors up to 4kW, and 400/690V 50Hz for higher powers.

APPLICATIONSDesigned for inline installation, they are suitable for:• Industrial applications, air extraction or injection.• Cooling of machines and parts. • Transport of dusty air and small loads of pellet materials.• Exhaust after filters, separators and cyclones.• Pneumatic transport.

• Maximum working temperature: carried air 130ºC; environment: 60ºC.

UNDER REQUEST• 60Hz fans and special voltages.• 2 speed motors.• Flameproof or explosionproof fans with ATEX cer-tified motors.• Fans for air working temperatures up to 250ºC. • Hot-dipped galvanised or stainless steel fans.• Special motors for frequency regulation (recom-mended for motor sizes IEC280 and larger).

Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400 690

MBRU 250 T2 0,37kW 2800 1,65 0,95 - 0,37 1330 61 25MBRU 280 T2 0,55kW 2800 2,33 1,35 - 0,55 1900 64 30MBRU 310 T2 1,1kW 2800 4,42 2,55 - 1,1 2700 68 40MBRU 350 T2 2,2kW 2800 8,61 4,98 - 2,2 3850 71 67MBRU 400 T2 4kW 2890 14,2 8,2 - 4 5400 75 105MBRU 450 T2 7,5kW 2900 - 15 8,6 7,5 7650 78 150MBRU 501 T2 11kW 2930 - 19,8 11,39 11 10800 82 230MBRU 561 T2 15kW 2930 - 26,6 15,3 15 13500 84 282MBRU 562 T2 18,5kW 2935 - 32 18,4 18,5 15300 85 292MBRU 631 T2 30kW 2950 - 52,6 30,25 30 19000 88 380MBRU 632 T2 37kW 2955 - 64,3 36,97 37 21600 89 390MBRU 502 T4 1,1kW 1400 4,74 2,75 - 1,1 5400 63 128MBRU 563 T4 2,2kW 1430 8,06 5 - 2,2 7650 67 138MBRU 633 T4 4kW 1440 15,2 8,8 - 4 10800 71 175MBRU 711 T4 5,5kW 1440 - 12 6,9 5,5 13500 73 270MBRU 712 T4 7,5kW 1440 - 15 8,6 7,5 15300 74 281MBRU 801 T4 11kW 1460 - 20,9 12,02 11 19000 77 327MBRU 802 T4 15kW 1460 - 27,9 16,04 15 21600 78 397MBRU 901 T4 18,5kW 1465 - 33 18,98 18,5 27000 80 416MBRU 902 T4 30kW 1475 - 53,2 30,59 30 30600 81 671MBRU 1001 T4 37kW 1475 - 66,7 38,35 37 38200 84 749MBRU 1002 T4 45kW 1475 - 78,6 45,2 45 42500 85 759MBRU 1121 T4 55kW 1480 - 96,2 55,32 55 54000 87 1140MBRU 1122 T4 75kW 1480 - 130 74,75 75 61800 88 1212MBRU 1251 T4 110kW 1485 - 188,6 108,45 110 76500 91 1470MBRU 1252 T4 132kW 1485 - 225,1 129,43 132 85000 92 1530MBRU 803 T6 4kW 960 16,3 9,4 - 4 15300 67 337MBRU 903 T6 7,5kW 965 - 16,1 9,26 7,5 21600 70 486MBRU 1003 T6 11kW 970 - 22,4 12,88 11 27000 74 612MBRU 1004 T6 15kW 970 - 29,4 16,91 15 30600 75 642MBRU 1123 T6 18,5kW 975 - 34,8 20,01 18,5 38200 77 967MBRU 1124 T6 22kW 975 - 41,4 23,81 22 42500 78 987MBRU 1253 T6 30kW 980 - 55,4 31,86 30 54000 80 1220MBRU 1254 T6 37kW 980 - 67,4 38,76 37 61800 81 1316

97

INT PE RARFS BA-400 SIL-C SIL-REI

MBGR

AC

CENTRIFUGAL MEDIUM PRESSURE FANS

ACCESSORIES

Backward impeller, dusty air, large pressures

THREE PHASE RANGE

MANUFACTURING FEATURES• Rolling steel sheet housing.• Fully welded or joined housing.• High efficiency single inlet and backward curved impeller, manufactured in rolled steel sheet and epoxy powder finishing coat.• Epoxy powder finishing coat.• Standard asynchronous squirrel-cage motor with IP-55 protection and rated class F insulation. Manu-factured with standard voltages: 230V 50Hz for sin-gle phase motors, 230/400V 50Hz for three phase, motors up to 4kW and 400/690V 50Hz for higher powers.

APPLICATIONSDesigned for inline installation, they are suitable for:• Industrial applications, air extraction or injection.• Cooling of machines and parts. • Transport of dusty air and small loads of pellet materials.

• Exhaust after filters, separators and cyclones.• Pneumatic transport.• Maximum working temperature: carried air 130ºC; environment: 60ºC.

UNDER REQUEST• 60Hz fans and special voltages.• 2 speed motors.• Flameproof or explosionproof fans with ATEX cer-tified motors.• Fans for air working temperatures up to 250ºC. • Hot-dipped galvanised or stainless steel fans.• Special motors for frequency regulation (recom-mended for motor sizes IEC280 and larger).

ModelR.P.M. max.

Max. Curr. (A) Rated PowerkW

Air flowm3/h

SounddB (A)

WeightKg230 400 690

MBGR 401 T2 2,2kW 2800 8,61 4,98 - 2,2 3050 77 73MBGR 402 T2 3kW 2870 11,1 6,4 - 3 4750 78 81MBGR 451 T2 4kW 2890 14,2 8,2 - 4 4250 80 99MBGR 452 T2 5,5kW 2900 - 11 6,3 5,5 6850 83 112MBGR 501 T2 7,5kW 2900 - 15 8,6 7,5 6150 84 145MBGR 502 T2 11kW 2930 - 19,8 11,39 11 9500 86 203MBGR 561 T2 11kW 2930 - 19,8 11,39 11 8500 89 227MBGR 562 T2 15kW 2930 - 26,6 15,3 15 13500 89 240MBGR 631 T2 22kW 2940 - 39 22,43 22 12000 89 311MBGR 632 T2 30kW 2950 - 52,6 30,25 30 19000 90 364MBGR 711 T2 37kW 2955 - 64,3 36,97 37 17000 93 440MBGR 712 T2 45kW 2960 - 77,1 44,33 45 27000 94 481MBGR 801 T2 75kW 2965 - 126,6 72,8 75 24200 94 603MBGR 802 T2 90kW 2970 - 151,7 87,23 90 38200 96 694MBGR 901 T2 132kW 2980 - 219,9 126,44 132 34200 98 938MBGR 902 T2 160kW 2980 - 263,1 151,28 160 54000 98 964MBGR 563 T4 1,5kW 1400 6,31 3,65 - 1,5 4250 67 137MBGR 564 T4 2,2kW 1430 8,06 5 - 2,2 6850 69 144MBGR 633 T4 3kW 1430 11,7 6,8 - 3 6150 71 147MBGR 634 T4 4kW 1440 15,2 8,8 - 4 9500 72 155MBGR 713 T4 4kW 1440 15,2 8,8 - 4 8500 74 246MBGR 714 T4 5,5kW 1440 - 12 6,9 5,5 13500 75 258MBGR 803 T4 7,5kW 1440 - 15 8,6 7,5 12000 77 331MBGR 804 T4 11kW 1460 - 20,9 12,02 11 19000 80 389MBGR 903 T4 15kW 1460 - 27,9 16,04 15 17000 80 478MBGR 904 T4 22kW 1470 - 38,5 22,14 22 27000 81 534MBGR 1001 T4 30kW 1475 - 53,2 30,59 30 24200 85 671MBGR 1002 T4 37kW 1475 - 66,7 38,35 37 38200 86 713MBGR 1121 T4 45kW 1475 - 78,6 45,2 45 34200 87 985MBGR 1122 T4 55kW 1480 - 96,2 55,32 55 54000 89 1056MBGR 1251 T4 75kW 1480 - 130 74,75 75 47500 91 1356MBGR 1252 T4 110kW 1485 - 188,6 108,45 110 76500 92 1392MBGR 905 T6 4kW 960 16,3 9,4 - 4 10800 68 388MBGR 906 T6 5,5kW 960 - 12,42 7,17 5,5 17000 70 399MBGR 1003 T6 7,5kW 965 - 16,1 9,26 7,5 15300 72 556MBGR 1004 T6 11kW 970 - 22,4 12,88 11 24200 73 587MBGR 1123 T6 15kW 970 - 29,4 16,91 15 21600 75 825MBGR 1124 T6 18,5kW 975 - 34,8 20,01 18,5 34200 75 906MBGR 1253 T6 22kW 975 - 41,4 23,81 22 30600 78 1111MBGR 1254 T6 30kW 980 - 55,4 31,86 30 47500 78 1182

98

MBRH

INTRFS AC

CENTRIFUGAL MEDIUM PRESSURE FANS

Backward impeller with no casing, air recirculation in ovens

ACCESSORIES

THREE PHASE RANGE

MANUFACTURING FEATURES• Fan including high efficiency single inlet and backward curved impeller, insulated wall, wall sup-port, cooling wheel, and motor.• Insulated thickness and wall support fully welded and adapted to the customer needs. • Special coat finishing for high temperature ap-plications.• Squirrel cage asynchronous standard motor, IP-55 protection and rated class F insulation. Stand-ard voltages 230V 50Hz for single phase motors, 230/400V 50Hz for three phase, motors up to 4kW and 400/690V 50Hz for higher powers. • Default assembly position is LG270.

APPLICATIONS• Air recirculation in ovens.• Maximum working temperature: carried air 250ºC; environment: 60ºC.

UNDER REQUEST• 60Hz fans and special voltages.• 2 speed motors.• Operation in high temperatures• Stainless steel fans.

Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400 690

MBRH 402 T4 0,75kW 1400 3,48 2,01 - 0,75 5400 67 56,07MBRH 452 T4 1,1kW 1400 4,74 2,75 - 1,1 7650 70 60,9MBRH 454 T4 1,5kW 1400 6,31 3,65 - 1,5 8500 73 64,05MBRH 504 T4 2,2kW 1430 8,06 5 - 2,2 10800 75 82,425MBRH 561 T4 3kW 1430 11,7 6,8 - 3 13500 77 90,93MBRH 562 T4 4kW 1440 15,2 8,8 - 4 17000 79 95,13MBRH 631 T4 5,5kW 1440 - 12 6,9 5,5 19000 80 133,245MBRH 711 T4 7,5kW 1440 - 15 8,6 7,5 24200 82 150,78MBRH 712 T4 11kW 1460 - 20,9 12,02 11 27000 84 179,13MBRH 713 T4 15kW 1460 - 27,9 16,04 15 34200 85 196,98MBRH 801 T4 18,5kW 1465 - 33 18,98 18,5 38200 86 244,755MBRH 802 T4 22kW 1470 - 38,5 22,14 22 47500 88 263,655MBRH 901 T4 30kW 1475 - 53,2 30,59 30 50000 90 228,48MBRH 902 T4 37kW 1475 - 66,7 38,35 37 54000 92 292,005MBRH 903 T4 45kW 1475 - 78,6 45,2 40 68500 94 321,405MBRH 403 T6 0,37kW 900 2,13 1,23 - 0,37 4500 63 57,645MBRH 454 T6 0,75kW 910 4 2,3 - 0,75 5300 66 69,3MBRH 503 T6 1,1kW 910 5,5 3,2 - 1,1 6200 67 84,525MBRH 634 T6 2,2kW 940 9,7 5,6 - 2,2 13500 70 126,945MBRH 714 T6 3kW 960 12,4 7,2 - 3 17000 73 149,73MBRH 715 T6 4kW 960 16,3 9,4 - 4 21600 76 159,18MBRH 803 T6 7,5kW 960 - 12,42 7,17 7,5 27000 78 256,305MBRH 804 T6 11kW 970 - 22,4 12,88 11 30600 81 269,955

99

INT PE RAIRFS

MDI

REG

CENTRIFUGAL MEDIUM PRESSURE FANS

ACCESSORIES

Forward impeller, stainless steel AISI 304

SINGLE PHASE RANGE

THREE PHASE RANGE

MANUFACTURING FEATURES• Welded stainless steel AISI 304 housing.• Stainless steel single inlet forward curved impeller.• Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. Manufac-tured with standard voltages: 230V 50Hz in single phase motors and 230/400V 50Hz in three phase motors.

APPLICATIONSDesigned for inline installation, they are suitable for:• Industrial applications, air extraction or injection.• Cooling of machines and parts. • Clean air transport.• Corrosive air transport.• Maximum working temperature: carried air 130ºC; environment: single phase 50ºC, three phase 60ºC.

UNDER REQUEST• 60Hz fans and special voltages.• 2 speed motors.• Flameproof and explosionproof fans withATEX certified motors.• Fans provided with cooling disk for high tempera-tures.

Code Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400

300716100 MDI 10/5 M2 0,1kW 2760 0,81 - 0,09 370 66 2,4300716200 MDI 12/6 M2 0,12kW 2770 0,98 - 0,12 500 69 2,8300716300 MDI 13/6 M2 0,18kW 2800 1,48 - 0,18 508 53 4,9300716400 MDI 13/6 M4 0,12kW 1400 1,1 - 0,12 416 71 5,3300716500 MDI 13/8 M4 0,12kW 1400 1,1 - 0,12 500 52 5,8300716600 MDI 13/8 M2 0,37kW 2800 2,73 - 0,37 1275 74 9,4300716700 MDI 16/8 M2 0,25kW 2800 1,96 - 0,25 900 74 6,2300716800 MDI 16/8 M4 0,12kW 1400 1,1 - 0,12 835 56 9300716900 MDI 18/8 M2 0,55kW 2800 3,88 - 0,55 1600 78 10,2300717000 MDI 18/8 M4 0,18kW 1400 1,62 - 0,18 1266 56 9,7300717100 MDI 20/10 M2 1,1kW 2800 7,02 - 1,1 3500 78 19300717200 MDI 20/10 M4 0,25kW 1400 2,02 - 0,25 1600 58 11300717300 MDI 25/13 M4 0,55kW 1400 4,25 - 0,55 3000 72 24

Code Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400

300717600 MDI 10/5 T2 0,1kW 2800 0,57 0,33 0,09 370 66 2,4300717700 MDI 12/6 T2 0,12kW 2800 0,67 0,38 0,12 500 69 2,8300717800 MDI 13/6 T2 0,18kW 2800 0,91 0,53 0,18 508 71 5,3300717900 MDI 13/6 T4 0,12kW 1400 0,84 0,48 0,12 416 53 4,9300718000 MDI 13/8 T4 0,12kW 1400 0,84 0,48 0,12 500 52 5,8300718100 MDI 13/8 T2 0,37kW 2800 1,65 0,95 0,37 1275 74 9,4300718200 MDI 16/8 T2 0,25kW 2800 1,17 1,68 0,25 900 74 6,2300718300 MDI 16/8 T4 0,12kW 1400 0,84 0,48 0,12 835 56 9300718400 MDI 18/8 T2 0,55kW 2800 2,33 1,35 0,55 1600 78 10,2300718500 MDI 18/8 T4 0,18kW 1400 1,12 0,65 0,18 1266 56 9,7300718600 MDI 20/10 T2 1,1kW 2800 4,42 2,55 1,1 3500 78 19300718700 MDI 20/10 T4 0,25kW 1400 1,44 0,83 0,25 1600 58 11300718800 MDI 25/13 T2 2,2kW 2800 8,61 4,98 2,2 3350 85 32300718900 MDI 25/13 T4 0,55kW 1400 2,69 1,56 0,55 3000 72 24

100

MBP

INTRFS

CENTRIFUGAL MEDIUM PRESSURE FANS

Backward impeller, anticorrosive plastic material

ACCESSORIES

THREE PHASE RANGE

MANUFACTURING FEATURES• PE plastic housing. • Backward curved impeller in PP plastic. • Motor support made of rolled steel sheet with epoxy powder finishing coat.• Stainless steel nuts and bolts.• Standard asynchronous squirrel-cage motor, IP-55, class F insulation. Standard voltages 230/400V 50Hz.• ATEX models equipped with II2G Eex-d motors.

APPLICATIONSDesigned for inline installation, they are suitable for:• Corrosive air transport.• Chemical and petrochemical industry.• Laboratories and gas cabinets.• Maximum working temperature: 50ºC.

UNDER REQUEST• Single phase motors (up to 1,5kW).• 60Hz fans and special voltages fans.• 2 speed motors.• Stainless steel motor support.• Casing made of PP, PPS, PPel, PEs. Impeller made of PPs, PVDF.• Sparkproof fans with certified ATEX Eex-d.

Code Model R.P.M. max.Max. Curr. (A) Rated Power

kWAir flowm3/h

SounddB (A)

WeightKg230 400

243200170 MBP 20 T2 1/4 2800 0,9 0,6 0,18 1100 63 9- MBP 20 T4 1/6 1400 0,74 0,43 0,12 550 47 9

243250170 MBP 25 T2 1/2 2800 2,1 1,2 0,37 2500 68 13243260170 MBP 25 T4 1/6 1400 0,74 0,43 0,12 1000 53 10243310170 MBP 31 T2 2 2800 5,3 3,4 1,5 4500 76 26243320170 MBP 31 T4 1/3 1400 1,4 0,81 0,25 2250 61 19

- MBP 31 T6 1/4 880 1,2 0,7 0,18 1500 50 19243350170 MBP 35 T2 3 2800 6,9 4 2,2 6800 76 32243360170 MBP 35 T4 1/2 1400 2,1 1,2 0,37 3400 60 23

- MBP 35 T6 1/4 880 1,2 0,7 0,18 2250 54 23243400170 MBP 40 T4 3/4 1400 2,45 1,42 0,55 4750 68 33243410170 MBP 40 T6 1/3 900 1,4 0,81 0,25 2375 56 30

- MBP 45 T2 5,5 2890 14,9 8,61 4 12000 82 52243450170 MBP 45 T4 1,5 1400 4,65 2,69 1,1 6000 64 41243460170 MBP 45 T6 1/2 900 2,1 1,2 0,37 4250 56 37

101

MBPC

INT PERFS

CENTRIFUGAL MEDIUM PRESSURE FANS

ACCESSORIES

Forward impeller, anticorrosive plastic material

THREE PHASE RANGE

MANUFACTURING FEATURES• PE plastic housing (antistatic PE-el for ATEX units).• Forward curved impeller in PP plastic. • Motor support made of rolled steel sheet with epoxy powder finishing coat.• Stainless steel nuts and bolts.• Standard asynchronous squirrel-cage motor, IP-55, class F insulation. Standard voltages 230/400V 50Hz.

APPLICATIONSDesigned for inline installation, they are suitable for:• Corrosive air transport.• Chemical and petrochemical industry.• Laboratories and gas cabinets.• Maximum working temperature: 50ºC.

UNDER REQUEST• Single phase motors (up to 1,5kW).• 60Hz fans and special voltages fans.• 2 speed motors.• Sparkproof fans with certified ATEX Eex-d.• Stainless steel motor support.• Casing made of PP, PPS, PPel, PEs.• Impeller made of PPs, PVDF.

Code ModelR.P.M. max.

Max. Curr. (A) Rated PowerkW

Air flowm3/h

SounddB (A)

WeightKg230 400 690

300725400 MBPC 20 T2 0,25kW 2800 1,17 1,68 - 0,25 800 74 18300725500 MBPC 20 T4 0,12kW 1400 0,84 0,48 - 0,12 440 59 9300725600 MBPC 25 T2 0,75kW 2800 3,03 1,75 - 0,75 1500 80 29300725700 MBPC 25 T4 0,18kW 1400 0,84 0,48 - 0,18 780 64 21300725800 MBPC 28 T2 1,1kW 2800 4,42 2,55 - 1,1 2100 85 20300725900 MBPC 28 T4 0,18kW 1400 1,12 0,65 - 0,18 1100 69 16300726000 MBPC 31 T2 1,5kW 2800 6,01 3,48 - 1,5 2510 90 31300726100 MBPC 31 T4 0,25kW 1400 1,44 0,83 - 0,25 1400 73 24300726200 MBPC 31 T6 0,12kW 850 1,08 0,62 - 0,12 920 64 20300726300 MBPC 35 T2 2,2kW 2800 8,61 4,98 - 2,2 2820 88 50300726400 MBPC 35 T4 0,37kW 1400 1,94 1,12 - 0,37 1970 72 40300726500 MBPC 40 T2 5,5kW 2900 - 11 6,3 5,5 5590 91 49300726600 MBPC 40 T2 4kW 2890 14,2 8,2 - 4 4080 91 47300726700 MBPC 40 T4 0,75kW 1400 3,48 2,01 - 0,75 2710 76 31300726800 MBPC 40 T6 0,25kW 900 1,51 0,87 - 0,25 1930 65 28300728800 MBPC 45 T2 9kW 2800 - 16,7 9,6 9 7640 93 65300726900 MBPC 45 T4 1,1kW 1400 4,74 2,75 - 1,1 3650 78 65300727000 MBPC 45 T6 0,37kW 900 2,13 1,23 - 0,37 2700 68 65300727100 MBPC 50 T4 2,2kW 1430 8,06 5 - 2,2 5440 80 100300727200 MBPC 50 T6 0,75kW 910 4 2,3 - 0,75 4090 70 90300727300 MBPC 56 T4 5,5kW 1440 - 12 6,9 5,5 9150 82 115300727400 MBPC 56 T6 2,2kW 940 9,7 5,6 - 2,2 8100 71 95

102

GROUP

CENTRIFUGAL MEDIUM PRESSURE FANS

Free shaft without motor or belt driven motor in different configurations

MANUFACTURING FEATURES• Rolling steel sheet housing, fully welded and pro-tected against corrosion with epoxy powder finish-ing coat.• Galvanised sheet (MZCA) or rolling steel sheet impeller (rest of ranges) protected against corrosion with epoxy powder finishing coat.• Supplied with free shaft, i.e. without motor, pulleys nor belts.

APPLICATIONSDesigned for inline installation, they are suitable for:• Industrial applications, air extraction or injection.• Cooling of machines and parts. • Clean air and pneumatic transport.• Clean air or slightly dusty air transport (MZRL).• Transport of dusty air or with low load of granu-lated materials (MZRM y MZRU).• Solid material transport and textile fibers (MZZM P/R).

UNDER REQUEST• Fully equipped fans including motor, pulleys, belts, belts guard and shaft guard. Assembled on a base plate.• Flameproof and explosionproof fans with ATEX certified motors.• Fans for air working temperatures up to 250ºC, 300ºC or 450ºC.• Hot-dipped galvanised or stainless steel fans.

NOTEFans are supplied as free shaft. For the price of whole assembled set (motor and transmission ex-ecution 9 or 12), please add to the fan cost: motor and corresponding transmission set size prices. Prices in accessories section (p.124).

Size22025028031035040045050056063071080090010001120

FAN EXECUTION 1 (FREE SHAFT)

Size2202502803103504004505005606307108009001000

FAN EXECUTION 9 (FREE SHAFT WITH BACKPACK)

Size22025028031035040045050056063071080090010001120

FAN CONFIGURA-TION 12 (FREE SHAFT WITH BASEMENT)