Centrifugal Heat Transfer Pump
Transcript of Centrifugal Heat Transfer Pump
1450 RPM
2900 RPM
Q [m3/h]
Q [U.S.GPM]
H [m]
H [feet]
100
90
80
70
60
50
40
30
20
10
0 0 20 40 60 80 100 120 140 160 180 200
300
250
200
150
100
50
0
0 100 200 300 400 500 600 700 800
32-250
32-20040-200
50-200 65-200
80-25065-250
80-200
32-160
40-16050-160 65-160
80-160
50-25040-250
Flow rate
Q [m3/h]
Q [U.S.GPM]
H [m]
H [feet]
25,0
22,5
20,0
17,5
15,0
12,5
10,0
7,5
5,0
2,5
0 0 10 20 30 40 50 60 70 80 90 100
80
70
60
50
40
30
20
10
0
0 50 100 150 200 250 300 350 400
32-250
32-20040-200
50-200 65-200
80-25065-250
80-200
32-160
40-16050-160 65-160
80-160
50-25040-250
Flow rate
50Hz
Perform
ance Curve
DimensionsDrawings
Main ApplicationsGlass Manufacturing Industry
Solar Industry Pump
Plant Manufacturing Pump
Leather & Rubber Manufacturing
Steel Manufacturing Applications
Boiler Feed Application Pumps
Heat Transfer/Exchange Pumps
Please Click The Icon Above For More Information:
The TOE-GA Series Centrifugal Heat Transfer Pumps from Speck Pumps are horizontal direct-coupled pumps with end suction. The Direct-Coupled design eliminates the need to align pump and motor shafts and eliminates the chance for shaft misalignment. The TOE Series is also available with a magnetic coupling.
The design of Speck Thermal Transfer centrifugal oil pumps allows for a pumping media that has little or no-abrasive contaminants and a pumping media that does not chemically attack the materials of construction of the Speck Pump.
Speck Centrifugal Thermal Transfer Pumps are available to work in a variety of industries where the movement of heated pumping media is required. Facilities with large baking and frying ovens, heated agitator and mixing tanks, flat glass production, solar power generation and the color and dye industry all have systems that would benefit from a Speck Thermal Centrifugal Pump.
Features
Usage
hot oil up to 662˚F
328 ft.
up to 880 GPM
max. 232 PSI
The design also eliminates any temperature misalignment. The pump comes standard with a mechanical shaft seal design. Suction and Discharge mounting flanges for the GA Series are ANSI and the casing is made from spheriodal graphite cast iron. Speck Centrifugal pumps are designed for the transport and re circulation of organic heat transfer oils on mineral and/or synthetic basis as well as hot water heat transfer applications throughout the world.
The robust design and construction of Speck pumps is due to a rigorous quality control system that begins at their manufacturing facilities where ISO:9001 requirements met throughout the entire manufacturing process resulting in a superior hot oil transfer pump.
Description