Ccd Trv65e

download Ccd Trv65e

of 108

Transcript of Ccd Trv65e

  • 7/25/2019 Ccd Trv65e

    1/108

    3-861-903-12(1)

    V id eo Cam era

    Recorder

    Opera t ing Inst ruct io nsBefore operating the unit, please read this manual thoroughly,and retain it for future reference.

    1998 by Sony Corporation

    CCD-TRV65E

    CCD-TRV3E/TRV15E/TRV23E/

    TRV35E

    CCD-TRV65E

    , , .

  • 7/25/2019 Ccd Trv65e

    2/108

    2

    English

    Welcome!

    Congratulations on your purchase of this SonyHandycamVision camcorder. With yourHandycam Vision you can capture lifes preciousmoments with superior picture and soundquality.

    Your Handycam Vision is loaded with advancedfeatures, but at the same time it is very easy touse. You will soon be producing home video thatyou can enjoy for years to come.

    WARNINGTo prevent fire or shock hazard, do not exposethe unit to rain or moisture.

    To avoid electrical shock, do not open thecabinet.Refer servicing to qualified personnel only.

    Handycam Vision Sony. HandycamVision

    . Handycam Vision

    , . ,

    .

    .

    . .

    !

  • 7/25/2019 Ccd Trv65e

    3/108

    3

    Table of contents

    English

    Before you beginUsing this manual ................................................... 5Checking supplied accessories ............................. 7

    Getting started

    Installing and charging the battery pack ............ 8Inserting a cassette ............................................... 14

    Basic operationsCamera recording ................................................. 15

    Using the zoom feature ..................................... 18Selecting the START/STOP mode .................. 20Shooting with the LCD screen ......................... 21Letting the subject monitor the shot (Mirror

    mode) ................................................................ 22Hints for better shooting ..................................... 23Checking the recorded picture ........................... 25

    Playing back a tape ............................................... 27Searching for the end of the picture................... 30

    Advanced operationsUsing alternative power sources ........................ 31

    Using the mains ................................................. 31Changing the mode settings ............................... 33

    for camera recording Shooting with backlighting ................................. 39Using the FADER function (CCD-TRV23E/

    TRV35E/TRV65E only) ..................................... 40Shooting in the dark (NightShot) (CCD-TRV23E/TRV35E/TRV65E only) ..................................... 43

    Using the wide mode function ........................... 44Using the PROGRAM AE function .................... 46Focusing manually (CCD-TRV23E/TRV35E/

    TRV65E only) ..................................................... 48Enjoying picture effect ......................................... 50Adjusting the exposure (CCD-TRV23E/TRV35E/

    TRV65E only) ..................................................... 52Superimposing a title ........................................... 54Making your own titles ....................................... 56

    Recording with the date/time ............................ 58Optimizing the recording condition .................. 59Releasing the STEADY SHOT function

    (CCD-TRV35E/TRV65E only) ......................... 60

    for playback/editing Watching on a TV screen ..................................... 60Editing onto another tape .................................... 63Recording from a VCR or TV

    (CCD-TRV65E only) .......................................... 64

    Additional informationChanging the lithium battery in the

    camcorder ........................................................... 65Resetting the date and time ................................. 67Simple setting of clock by time difference ........ 68

    Usable cassettes and playback modes ............... 69Tips for using the battery pack ........................... 71Maintenance information and precautions....... 75Using your camcorder abroad ............................ 81Trouble check ........................................................ 82Self-diagnosis display .......................................... 88Specifications ......................................................... 90Identifying the parts ............................................. 94Warning indicators ............................................. 104Index ..................................................................... 106

  • 7/25/2019 Ccd Trv65e

    4/108

    4

    ........... 5 ... 7

    ..... 8 ........................................... 14

    ................ 15

    .............................................. 18 START/STOP ..................... 20 .. 21 ( ) . 22

    ......................... 23

    .......... 25 .............................. 27 ........................... 30

    ........................................................ 31 ........ 31

    ................... 33

    - -

    ...................... 39 FADER( CCD-TRV23E/TRV35E/TRV65E) ... 40

    ( )( CCD-TRV23E/TRV35E/TRV65E) ... 43

    ........................................................ 44

    PROGRAM AE ..... 46 ( CCD-TRV23E/

    TRV35E/TRV65E) ........................................ 48 .... 50 ( CCD-

    TRV23E/TRV35E/TRV65E) .......................... 52 ...................................... 54 .... 56 /............................. 58 .................. 59 STEADY SHOT (

    CCD-TRV35E/TRV65E) ............................... 60

    - / - ................. 60 .............................. 63 (

    CCD-TRV65E) .............................................. 64

    ............................................... 65 .......................... 67

    .................................................. 68

    ........................................ 69

    ........................................................... 71

    ..................................... 75

    ...................................................... 81 ........................... 85 ........................... 89 ...................... 92 ..................................... 94 ............... 104 .............................. 107

  • 7/25/2019 Ccd Trv65e

    5/108

    5

    Before you begin

    The instructions in this manual are for the fivemodels listed below. Before you start readingthis manual and operating the unit, check your

    model number by looking at the bottom of yourcamcorder. The CCD-TRV65E is the model usedfor illustration purposes. Otherwise, the modelname is indicated in the illustrations. Anydifferences in operation are clearly indicated inthe text, for example, CCD-TRV65E only.As you read through this manual, buttons andsettings on the camcorder are shown in capitalletters.e.g. Set the POWER switch to CAMERA.You can hear the beep sound to confirm your

    operation.

    Using this manual

    Beforeyoubegin

    * The models without VIDEO/AUDIO IN haveCAMERA, OFF and PLAYER mode on thePOWER switch.

    Types of differences

    CCD- TRV3E TRV15E TRV23E TRV35E TRV65E

    Systemh h h h H

    VIDEO/AUDIO IN* r

    S VIDEO r

    Optical zoom16x 16x 18x 18x 18x

    Digital zoom100x 200x 220x 220x 220x

    NightShot r r r

    Steady Shot r r

    Remote sensor r r r r

    Fader function r r r

    Stripe r

    Manual focus r r r

    Exposure r r r

    Audio monaural monaural monaural monaural stereo ooo ooo ooo ooo

    . , ,

    , . CCD-TRV65E . . , , CCD-TRV65E. ,, .. POWER

    CAMERA. .

    * VIDEO/AUDIO IN POWER CAMERA, OFF PLAYER.

  • 7/25/2019 Ccd Trv65e

    6/108

    6

    Using this manual

    [a] [b]

    Note on TV colour systems

    TV colour systems differ from country tocountry. To view your recordings on a TV, youneed a PAL system-based TV.

    Precaution on copyright

    Television programmes, films, video tapes, andother materials may be copyrighted.Unauthorized recording of such materials may

    be contrary to the provision of the copyrightlaws.

    Precautions on camcorder care

    The LCD screen and/or the colour viewfinderare manufactured using high-precisiontechnology. However, there may be sometiny black points and/or bright points (red,blue or green in colour) that constantlyappear on the LCD screen and/or in theviewfinder. These points are normal in themanufacturing process and do not affect therecorded picture in any way. Over 99.99%are operational for effective use.

    Do not let the camcorder get wet. Keep thecamcorder away from rain and sea water.Letting the camcorder get wet may cause theunit to malfunction, and sometimes thismalfunction cannot be repaired [a].

    Never leave the camcorder exposed totemperatures above 60C (140F ), such as in acar parked in the sun or under direct sunlight[b].

    .

    , PAL.

    , , .

    .

    / ., /

    (, ) / . . 99,99% .

    . .

    , , [a].

    60 (140F), , , [b].

  • 7/25/2019 Ccd Trv65e

    7/108

    7

    Checking suppliedaccessories

    1 2 3 4

    5 6

    Check that the following accessories are suppliedwith your camcorder.

    1Wireless Remote Commander (1) (p. 99)CCD-TRV15E/TRV23E/TRV35E/TRV65Eonly

    2AC-L10A/L10B/L10C AC power adaptor(1),Mains lead(1) (p. 9, 31)

    3NP-F330 Battery pack(1) (p. 8, 31)

    4CR2025 Lithium Battery(1) (p. 65)The lithium battery is already installed inyour camcorder.

    5R6 (size AA) battery for RemoteCommander (2) (p. 100)CCD-TRV15E/TRV23E/TRV35E/TRV65Eonly

    6A/V connecting cable(1) (p. 61)*for stereo model

    7Shoulder strap(1) (p. 101)

    8Cassette (1)CCD-TRV15E only

    B

    eforeyoubegin

    7*

    or/

    Contents of the recording cannot becompensated if recording or playback is notmade due to a malfunction of the camcorder,video tape, etc.

    , .

    1 (1) (. 99) CCD-TRV15E/TRV23E/TRV35E/TRV65E

    2 . AC-L10A/

    L10B/L10C(1), C (1) (. 9,31)

    3 NP-F330(1) (. 8, 31)

    4 CR2025(1) (. 65) .

    5 R6 ( ) (2) (.100) CCD-TRV15E/TRV23E/TRV35E/

    TRV65E

    6 /(1) (. 61)*

    7 (1) (. 101)

    8 (1) CCD-TRV15E

    ,

    , ..

    8

  • 7/25/2019 Ccd Trv65e

    8/108

    8

    Before using your camcorder, you first need toinstall and charge the battery pack.This camcorder operates only with the

    InfoLITHIUM battery.

    InfoLITHIUM is a trademark of SonyCorporation.

    Installing the bat tery pack

    (1)While pressing BATT RELEASE, slide thebattery terminal cover in the direction of thearrow.

    (2)Install the battery pack in the direction of the

    $mark on the battery pack. Slide the batterypack down until it catches on the batteryrelease lever and clicks.Attach the battery pack to the camcordersecurely.

    Gett ing start ed

    Installing and chargingthe battery pack

    Note on the battery packDo not carry the camcorder by grasping the

    battery pack.

    1 2BATT RELEASE

    cao

    .

    InfoLITHIUM.

    InfoLITHIUM Sony.

    (1) BATT RELEASE,

    .

    (2) $ . ,

    . .

    ,

    .

  • 7/25/2019 Ccd Trv65e

    9/108

    9

    Gettingstarted

    POWER

    OFF

    CAMERA

    VTR

    Installing and charging thebatt ery pack

    Charging the bat tery pack

    Charge the battery pack on a flat surface withoutvibration. The battery pack is charged a little inthe factory.

    (1)Open the DC IN jack cover and connect thesupplied AC power adaptor to the DC IN jackwith the plugs 4mark up.

    (2)Connect the mains lead to the AC poweradaptor.

    (3)Connect the mains lead to the mains.(4)Slide the POWER switch to OFF. Remaining

    battery time is indicated by the minutes onthe display window. Charging begins.

    When the remaining battery indicator becomes, normal chargeis completed. For full

    charge, which allows you to use the batterylonger than usual, leave the battery pack attachedfor about 1 hour after normal charge iscompleted until FULL appears in the displaywindow.Before using the camcorder with the batterypack, unplug the AC power adaptor from the DCIN jack of the camcorder. You can also use the

    battery pack before it is completely charged.

    cao

    , . .

    (1) DC IN DC IN, 4 .

    (2) .

    (3) .(4) POWER

    OFF. . .

    , . , , , , FULL.

    DC IN . , .

  • 7/25/2019 Ccd Trv65e

    10/108

    10

    Notes min appears in the display window

    until the camcorder calculates remainingbattery time.

    Remaining battery time indication in the

    display window roughly indicates therecording time with the viewfinder. Use it as aguide. It may differ from the actual recordingtime.

    If there is a slight difference in shape betweenthe plug of mains lead and the terminal of ACpower adaptor, it is ignorable for their mutualconnection and power supply.

    Be sure to plug the mains lead deeply into theterminal of AC power adaptor so that it isfirmly locked. If there is a gap between the plugof mains lead and the terminal of AC poweradaptor, it does not affect the efficiency of theAC power adaptor.

    Charging tim e

    Battery pack Charging time* (min.)

    NP-F330 (supplied) 150 (90)

    NP-F530/F550 210 (150)

    NP-F730/F750 300 (240)

    NP-F930/F950 390 (330)

    The time required for a normal charge isindicated in parentheses.* Approximate minutes to charge an emptybattery pack using the supplied AC poweradaptor. (Lower temperatures require a longercharging time.)

    Installing and charging thebattery pack

    cao

    min ,

    .

    . .

    .

    - , .

    , .

    , .

    * (.)NP-F330 () 150 (90)

    NP-F530/F550 210 (150)

    NP-F730/F750 300 (240)

    NP-F930/F950 390 (330)

    .*

    . (

    .)

  • 7/25/2019 Ccd Trv65e

    11/108

    11

    Gettingstarted

    Batt ery lifeUpper numbers are the time when recordingwith the viewfinder. Lower numbers are the timewhen recording with the LCD screen. Using bothwill further reduce recording time.

    CCD-TRV3E/TRV15E/TRV23E

    Battery ContinuousTypical Playingpack recording recording time on

    time* time** LCD

    NP-F330 130 (115) 65 (60)(supplied) 100 (90) 55 (45)

    100 (90)

    NP-F530 225 (200) 115 (105)170 (155) 90 (85)

    165 (150)

    NP-F550 260 (230) 135 (120)

    205 (185) 110 (100)

    200 (180)

    NP-F730 450 (405) 235 (210)350 (310) 190 (170)

    335 (300)

    NP-F750 530 (480) 280 (250)425 (380) 230 (205)

    410 (365)

    NP-F930 710 (640) 375 (335)555 (500) 305 (275)

    535 (480)

    NP-F950 815 (730) 430 (385)650 (590) 355 (320)

    630 (570)

    CCD-TRV35EBattery ContinuousTypical Playing

    pack recording recording time on

    time* time** LCD

    NP-F330 125 (110) 65 (55)(supplied) 100 (90) 55 (45)

    100 (90)

    NP-F530 215 (190) 110 (100)165 (150) 90 (80)

    165 (150)

    NP-F550 250 (220) 130 (115)200 (180) 110 (95)

    200 (180)

    NP-F730 430 (385) 225 (200)335 (300) 180 (165)

    335 (300)

    NP-F750 510 (460) 270 (240)410 (365) 225 (200)

    410 (365)

    NP-F930 680 (610) 360 (320)535 (480) 290 (260)

    535 (480)

    NP-F950 780 (700) 410 (370)630 (570) 345 (310)

    630 (570)

    Installing and charging thebatt ery pack

    . .

    .

    CCD-TRV3E/TRV15E/TRV23E

    -

    * **

    NP-F330 130 (115) 65 (60)() 100 (90) 55 (45)

    100 (90)

    NP-F530 225 (200) 115 (105)170 (155) 90 (85)

    165 (150)

    NP-F550 260 (230) 135 (120)

    205 (185) 110 (100) 200 (180)

    NP-F730 450 (405) 235 (210)350 (310) 190 (170)

    335 (300)

    NP-F750 530 (480) 280 (250)425 (380) 230 (205)

    410 (365)

    NP-F930 710 (640) 375 (335)555 (500) 305 (275)

    535 (480)

    NP-F950 815 (730) 430 (385)650 (590) 355 (320)

    630 (570)

    CCD-TRV35E

    -

    * **

    NP-F330 125 (110) 65 (55)

    () 100 (90) 55 (45)100 (90)

    NP-F530 215 (190) 110 (100)

    165 (150) 90 (80)165 (150)

    NP-F550 250 (220) 130 (115)

    200 (180) 110 (95)

    200 (180)

    NP-F730 430 (385) 225 (200)

    335 (300) 180 (165)335 (300)

    NP-F750 510 (460) 270 (240)

    410 (365) 225 (200)410 (365)

    NP-F930 680 (610) 360 (320)

    535 (480) 290 (260)535 (480)

    NP-F950 780 (700) 410 (370)

    630 (570) 345 (310)630 (570)

    cao

  • 7/25/2019 Ccd Trv65e

    12/108

    12

    CCD-TRV65E

    Battery ContinuousTypical Playing

    pack recording recording time on

    time* time** LCD

    NP-F330 120 (105) 60 (55)(supplied) 95 (85) 50 (45)

    95 (85)

    NP-F530 205 (180) 105 (95)160 (145) 85 (75)

    155 (140)

    NP-F550 240 (210) 125 (110)195 (175) 105 (95)

    190 (170)

    NP-F730 410 (370) 215 (195)325 (290) 175 (155)

    315 (285)

    NP-F750 490 (440) 255 (230)

    395 (355) 215 (195)

    385 (345)

    NP-F930 650 (585) 340 (310)515 (465) 280 (255)

    495 (450)

    NP-F950 750 (675) 395 (355)610 (550) 335 (300)

    590 (530)

    Numbers in parentheses indicate the time whenyou use a normally charged battery.Battery life will be shorter if you use thecamcorder in a cold environment.

    * Approximate continuous recording time at25C (77F).** Approximate minutes when recording while

    you repeat recording start/stop, zooming andturning the power on/off. The actual batterylife may be shorter.

    Notes on remaining battery time indicationduring recordingRemaining battery time is displayed in the

    viewfinder or on the LCD screen. However, theindication may not be displayed properly,depending on using conditions andcircumstances.

    When you close the LCD panel and open itagain, it takes about 1 minute for the correctremaining time to be displayed.

    Installing and charging thebattery pack

    cao

    CCD-TRV65E

    -

    * **

    NP-F330 120 (105) 60 (55)() 95 (85) 50 (45)

    95 (85)

    NP-F530 205 (180) 105 (95)160 (145) 85 (75)

    155 (140)

    NP-F550 240 (210) 125 (110)195 (175) 105 (95)

    190 (170)

    NP-F730 410 (370) 215 (195)325 (290) 175 (155)

    315 (285)

    NP-F750 490 (440) 255 (230)

    395 (355) 215 (195)

    385 (345)

    NP-F930 650 (585) 340 (310)515 (465) 280 (255)

    495 (450)

    NP-F950 750 (675) 395 (355)610 (550) 335 (300)

    590 (530)

    ,

    . , .

    * 25 (77 F).

    ** /, , /

    .

    .

    .

    . , .

    , 1 .

  • 7/25/2019 Ccd Trv65e

    13/108

    13

    Gettingstarted

    BATT RELEASE

    To remove t he batt ery packWhile pressing BATT RELEASE, slide the batterypack in the direction of the arrow.

    Installing and charging thebatt ery pack

    You can look at the demonstration of thefunctions available with this camcorder (p. 37).

    BATT RELEASE, .

    ,

    (. 37).

    cao

  • 7/25/2019 Ccd Trv65e

    14/108

    14

    Make sure that the power source is installed.When you want to record in the Hi8 system, useHi8 video cassette H.(CCD-TRV65E only)(1)While pressing the small blue button on the

    EJECT switch, slide it in the direction of the

    arrow. The cassette compartmentautomatically lifts up and opens.

    (2)Insert a cassette with the window facing out.(3)Close the cassette compartment by pressing

    the PUSH mark on the cassettecompartment. The cassette compartmentautomatically goes down.

    To eject the cassetteWhile pressing the small blue button on theEJECT switch, slide it in the direction of thearrow.

    To prevent accident al erasure

    Slide the tab on the cassette to expose the redmark. If you insert the cassette with the redmark exposed and close the cassettecompartment, the beeps sound for a while. Ifyou try to record with the red mark exposed, the

    and 6indicators flash, and you cannotrecord.To re-record on this tape, slide the tab back outcovering the red mark.

    Insert ing a casset te

    1 2 3EJECT PUSH

    , . Hi8, Hi8- H.( CCD-TRV65E)(1)

    EJECT, . .

    (2) , .

    (3) PUSH . .

    EJECT, . .

    , . , , , . , 6 .

    .

  • 7/25/2019 Ccd Trv65e

    15/108

    15

    Basicoperations

    Basic operations

    Camera recording

    Make sure that the power source is installed anda cassette is inserted and that the START/STOPMODE switch inside the LCD panel is set to .Before you record one-time events, you maywant to make a trial recording to make sure that

    the camcorder is working correctly.When you use the camcorder for the first time,power on it and reset the date and time to yourtime before you start recording (p. 67). The dateis automatically recorded for 10 seconds afteryou start recording (AUTO DATE feature). Thisfeature works only once a day.(1)While pressing the small green button on the

    POWER switch, set it to CAMERA.(2)Turn STANDBY up to STANDBY.(3)Press START/STOP. The camcorder starts

    recording. The REC indicator appears. Thered lamp lights up in the viewfinder. Thecamera recording/battery lamp located on thefront of the camcorder also lights up.

    POWER

    OFF

    VTR

    CAMERA

    2

    3

    1

    LOCK

    START/STOP

    STANDBY

    LOCK

    START/STOP

    STANDBY

    40min SPH STBY 0:00:00

    40min SPH REC 0:00:01

    AUTO DATE

    4 7 1998

    , , START/STOP MODE .

    , , . ,

    (. 67) 10 ( AUTO DATE). .(1)

    POWER, CAMERA.

    (2) STANDBY STANDBY.

    (3) START/STOP. .

    REC. . /, , .

  • 7/25/2019 Ccd Trv65e

    16/108

    16

    To stop recording moment arily [a]Press START/STOP again. The STBY indicatorappears in the viewfinder (Standby mode).

    To f inish recording [b]

    Press START/STOP again. Turn STANDBYdown to LOCK and set the POWER switch toOFF. Then, eject the cassette.

    NoteThere is a little wear on the battery pack which isinstalled with the camcorder. However, forgetting remaining battery time indicatedcorrectly, leave the battery pack installed afteruse.

    To focus the view f inder lensIf you cannot see the indicators in the viewfinderclearly, or after someone else has used thecamcorder, focus the viewfinder lens. Turn theviewfinder lens adjustment ring so that theindicators in the viewfinder come into sharpfocus.

    LOCK

    START/STOP

    S

    TANDBY

    START/STOP

    LOCK

    S

    TANDBY

    STBY 0:35:20LO

    CK

    START/STOP

    S

    TANDBY

    Camera recording

    [a] [b]

    , . , ,

    , .

    , - , .

    , , .

    [a] START/STOP.

    STBY ().

    [b] START/STOP.

    STANDBY LOCK

    POWER OFF. .

  • 7/25/2019 Ccd Trv65e

    17/108

    17

    Basicoperations

    Camera recording

    Note on Standby modeIf you leave the camcorder in Standby mode for 5minutes while the cassette is inserted, thecamcorder turns off automatically for saving

    battery power as well as for preventing the

    battery and tape from wearing down. To resumeStandby mode, turn STANDBY down and upagain. To start recording, press START/STOP.

    Note on recordingWhen you record from the beginning of a tape,run the tape for about 15 seconds before startingthe actual recording. This will ensure that youwont miss any start-up scenes when you play

    back the tape.

    Notes on the tape counterThe tape counter indicates the recording or

    playback time. Use it as a guide. There will bea time lag of several seconds from the actualtime. To set the counter to zero, pressCOUNTER RESET.

    If the tape is recorded in SP and LP modesmixed, the tape counter shows incorrectrecording time. When you intend to edit thetape using the tape counter as a guide, record insame (SP or LP) mode.

    Note on the beep soundThe beep sounds when you operate thecamcorder. Several beeps also sound as awarning of any unusual condition of thecamcorder.Note that the beep sound is not recorded on thetape. If you do not want to hear the beep sound,select OFF in the menu system.

    5 ,

    , .

    STANDBY , .

    START/STOP.

    ,

    15 .

    , - , .

    . . .

    COUNTER

    RESET.

    SP LP, .

    , (SP LP).

    , . - .

    , . , OFF .

  • 7/25/2019 Ccd Trv65e

    18/108

    18

    Note on the AUTO DATE featureThe clock is set at the factory to Sydney time forAustralia and New Zealand models, to Tokyotime for the models sold in Japan, and to HongKong time for other models. You can reset the

    clock in the menu system. You can change theAUTO DATE settings by selecting ON or OFF inthe menu system. The AUTO DATE featureshows the date automatically once a day.However, the date may automatically appearmore than once a day when: you reset the date and time. you eject and insert the tape again. you stop recording within 10 seconds. you set AUTO DATE to OFF once and set it to

    ON again in the menu system.

    Using the zoom feature

    Zooming is a recording technique that lets youchange the size of the subject in the scene.For more professional-looking recordings, usethe zoom function sparingly.T side: for telephoto (subject appears closer)W side: for wide-angle (subject appears farther

    away)

    Camera recording

    TW TWW T

    AUTO DATE

    , , ,

    . . AUTO DATE

    ON OFF . AUTO DATE . , , : .

    . 10

    . AUTO DATE

    OFF, ON.

    , .

    . : (

    ) W:

    ( )

  • 7/25/2019 Ccd Trv65e

    19/108

    19

    Basicoperations

    TWTW

    [a][b]

    Camera recording

    Zooming speed (Variable speedzooming)Move the power zoom lever a little for a slowerzoom, move it further for a faster zoom.

    When you shoot a subject using a telephotozoomIf you cannot get a sharp focus while in extremetelephoto zoom, move the power zoom lever tothe W side until the focus is sharp. You canshoot a subject that is at least about 80 cm (about2 5/8 feet) away from the lens surface in thetelephoto position, or about 1 cm (about 1/2inch) away in the wide-angle position.

    Notes on digital zoom

    More than 16x (CCD-TRV3E/TRV15E) or 18x(CCD-TRV23E/TRV35E/TRV65E) zoom isperformed digitally, and the picture qualitydeteriorates as you go toward the T side. Ifyou do not want to use the digital zoom, set theD ZOOM function to OFF in the menu system.

    The right side [a]of the power zoom indicatorshows the digital zooming zone, and the leftside [b]shows the optical zooming zone. If youset the D ZOOM function to OFF, the [a]zonedisappears.

    ( ) ;

    .

    ,

    , W , . ,

    80

    , 1 .

    , 16-

    (CCD-TRV3E/TRV15E), 18- (CCD-

    TRV23E/TRV35E/TRV65E) ,

    . , D ZOOM

    OFF. [a]

    , [b] . D ZOOM

    OFF, [a].

  • 7/25/2019 Ccd Trv65e

    20/108

    20

    Selecting the START/STOP mode

    Your camcorder has three modes. These modesenable you to take a series of quick shotsresulting in a lively video.(1) While pressing OPEN, open the LCD panel.(2) Set START/STOP MODE to the desired

    mode.: Recording starts when you press

    START/STOP, and stops when you press itagain (normal mode).ANTI GROUND SHOOTING : Thecamcorder records only while you pressdown START/STOP so that you can avoidrecording unnecessary scenes.5SEC: When you press START/STOP, thecamcorder records for 5 seconds and thenstops automatically.

    (3) Turn STANDBY up to STANDBY and pressSTART/STOP. Recording starts.

    If you selected 5SEC, the tape counter disappearsand five dots appear. The dots disappear at arate of one per second as illustrated below.

    To extend the recording time in 5SECmodePress START/STOP again before all the dotsdisappear. Recording continues for about 5seconds from the moment you press START/STOP.

    Notes on START/STOP modeIf you have turned off the indicators on the

    LCD screen, the dots do not appear.You cannot use FADER in 5SEC or mode.

    Camera recording

    STBY REC

    REC

    2

    1

    35SEC

    ANTIGROUNDSHOOTING

    START/STOP

    MODE LOCK

    START/STOP

    STANDBY

    LOCK

    START/STOP

    STANDBY

    START/STOP

    .

    ,

    .(1) OPEN, .(2) START/STOP

    MODE .

    :

    START/STOP , ( )ANTI GROUND SHOOTING :

    , START/STOP

    , , .5SEC: START/STOP, 5 ,

    .(3) STANDBY

    STANDBY START/STOP. .

    5SEC, .

    , .

    5SEC START/STOP , . 5 START/STOP.

    START/STOP

    , .

    FADER 5SEC .

  • 7/25/2019 Ccd Trv65e

    21/108

    21

    Basicoperations

    Shooting with the LCD screen

    You can also record the picture while looking atthe LCD screen.When using the LCD screen, the viewfinder turnsoff automatically. You cannot monitor the soundfrom the speaker during recording.(1)While pressing OPEN, open the LCD panel.(2)Adjust the angle of the LCD panel.

    The LCD panel moves about 90 degrees tothis side and about 210 degrees to the otherside.To adjust the brightness of the LCD screen,press LCD BRIGHT.+ side: to brighten the LCD screen side: to dim the LCD screen

    The battery life is longer when the LCD panel isclosed. Use the viewfinder instead of the LCDscreen to save the battery power.

    Backlight ing the LCD screenIf the LCD screen is insufficiently illuminatedeven after adjusting LCD BRIGHT, select LCD B.L. in the menu system and set to BRIGHT. Youcan select LCD B. L. only while using the batterypack as a power source.

    Camera recording

    1 2

    2 1

    210

    90

    90

    LCD

    BRIGHT

    , . .

    .(1) OPEN, .(2) .

    90

    210 . LCD BRIGHT. +:

    :

    , .

    .

    LCD BRIGHT, LCD B. L.

    BRIGHT. LCD B. L. .

  • 7/25/2019 Ccd Trv65e

    22/108

    22

    Notes on the LCD panelWhen closing the LCD panel, turn it vertically

    until it clicks [a].When turning the LCD panel, turn it always

    vertically; otherwise, the camcorder body may

    be damaged or the LCD panel may not closeproperly [b].

    Close the LCD panel completely when not inuse.

    Letting t he subject monitor t heshot (M irror mode)

    You can turn the LCD panel over so that it facesthe other way and you can let the subject monitorthe shot while shooting with the viewfinder.

    Turn the LCD panel vertically first until it clicks,then turn it over. The indicator appears onthe LCD screen (Mirror mode)and the date andremaining tape indicators disappear.

    To cancel mirror modeTurn the LCD panel back toward the viewfinder.

    Notes on mirror modeThe picture on the LCD looks as a mirror-image

    while recording in mirror mode. The STBYindicator appears as Prand REC as r. Theother indicators may not appear in mirrormode.

    While recording in mirror mode, you cannotoperate the following buttons: TITLE, DATE,TIME and MENU.

    The date appears in reverse when the AUTODATE feature is turned on. When recorded, itwill be normal.

    Camera recording

    [a] [b]

    1

    2

    , [a].

    ; [b].

    , .

    ( )

    , , , .

    , , , . () .

    .

    . STBY Pr, REC r. , .

    . , : TITLE, DATE, TIME, MENU.

    , AUTO DATE. .

  • 7/25/2019 Ccd Trv65e

    23/108

    23

    Basicoperations

    Hints for bett ershooting

    [a] [b]

    For hand-held shots, youll get better results byholding the camcorder according to the followingsuggestions:Hold the camcorder firmly and secure it with

    the grip strap so that you can easily manipulate

    the controls with your thumb.

    Place your right elbow against your side.Place your left hand under the camcorder to

    support it. Be sure to not touch the built-inmicrophone.

    Place your eye firmly against the viewfindereyecup.

    Use the viewfinder frame as a guide todetermine the horizontal plane.

    You can also record in a low position to get aninteresting angle. Lift the viewfinder up forrecording from a low position [a].

    You can also record in a low position or even ina high position using the LCD panel [b].

    When you use the LCD screen outdoors indirect sunlight, the LCD screen may be difficult

    to see. If this happens, we recommend that youuse the viewfinder.

    3

    2

    1

    , :

    , .

    .

    . .

    .

    .

    .

    [a].

    [b].

    ,

    . , .

  • 7/25/2019 Ccd Trv65e

    24/108

    24

    Hints for bett er shoot ing

    Place the camcorder on a flat surface or use atripodTry placing the camcorder on a table top or anyother flat surface of suitable height. If you have atripod for a still camera, you can also use it with

    the camcorder.When attaching a non-Sony tripod, make surethat the length of the tripod screw is less than 6.5mm (9/32 inch). Otherwise, you cannot attachthe tripod securely and the screw may damagethe camcorder.

    Cautions on the viewfinder and the LCDDo not pick up the camcorder by the

    viewfinder or by the LCD panel [c].Do not place the camcorder so as to point the

    viewfinder or the LCD screen toward the sun.The inside of the viewfinder may be damaged.Be careful when placing the camcorder undersunlight or by a window [d].

    [c] [d]

    .

    , .

    Sony, 6,5

    . .

    [c].

    , .

    . [d].

  • 7/25/2019 Ccd Trv65e

    25/108

    25

    Basicoperations

    Checking therecorded picture

    Using EDITSEARCH, you can review the lastrecorded scene or check the recorded picture inthe viewfinder or on the LCD screen.(1)While pressing the small green button on the

    POWER switch, set it to CAMERA.

    (2)Turn STANDBY up to STANDBY.(3)Press the () side of EDITSEARCH

    momentarily; the last few seconds of therecorded portion play back (Rec Review).You can monitor the sound from the speaker,headphones (CCD-TRV65E) or an earphone(CCD-TRV3E/TRV15E/TRV23E/TRV35E).Hold down the side of EDITSEARCH untilthe camcorder goes back to the scene youwant. The last recorded portion is played

    back. To go forward, hold down the + side

    (Edit Search).

    EDITSEARCH

    EDITSEARCH

    2

    3

    LOCK

    START/STOP

    STANDBY

    EDITSEARCH

    1POWER

    OFF

    VTR

    CAMERA

    -

    EDITSEARCH,

    .(1)

    POWER, CAMERA.

    (2) STANDBY STANDBY.

    (3) () EDITSEARCH; ( ). ,

    (CCD-TRV65E) (CCD-TRV3E/

    TRV15E/TRV23E/TRV35E). EDITSEARCH , .

    . + ().

  • 7/25/2019 Ccd Trv65e

    26/108

    26

    To stop playbackRelease EDITSEARCH.

    To go back to the last recorded pointaf ter edit search

    Press END SEARCH. The last recorded point isplayed back for about 5 seconds (10 seconds inLP mode) and stops. Note that this function doesnot work once you eject the cassette after yourecorded on the tape.

    To begin re-recordingPress START/STOP. Re-recording begins fromthe point you released EDITSEARCH. Providedyou do not eject the cassette, the transition

    between the last scene you recorded and the next

    scene you record will be smooth.

    Checking the recorded picture

    EDITSEARCH.

    END SEARCH. 5 (10 LP) . ,

    , .

    START/STOP.

    , EDITSEARCH. , , , , , , .

  • 7/25/2019 Ccd Trv65e

    27/108

    27

    Basicoperations

    Playing back a tape

    You can monitor the playback picture on theLCD screen.(1)While pressing the small green button on the

    POWER switch, set it to VTR (CCD-TRV65E)or PLAYER (CCD-TRV3E/TRV15E/TRV23E/

    TRV35E). The video control buttons light up(CCD-TRV23E/TRV35E/TRV65E only).

    (2)Insert the recorded tape with the windowfacing out.

    (3)While pressing OPEN, open the LCD panel.Adjust the angle of the LCD panel or the

    brightness of the LCD screen if necessary.(4)Press 0to rewind the tape.(5)Press (to start playback.(6)Adjust the volume using VOLUME and adjust

    the brightness of the LCD screen using LCD

    BRIGHT.You can also monitor the picture on a TV screen,after connecting the camcorder to a TV or VCR.

    To stop playback,press p.To rewind the tape,press 0.To fast-forward the tape rapidly,press ).

    1 2

    3

    5

    6

    VOLUME

    4

    PLAY

    REW

    LCDB

    RIGHT

    POWER

    OFFVTR

    CAMERA

    .(1)

    POWER, VTR (CCD-TRV65E)

    PLAYER (CCD-TRV3E/TRV15E/TRV23E/TRV35E).

    . ( CCD-TRV23E/TRV35E/TRV65E).

    (2) , .

    (3) OPEN, .

    , .(4) 0

    .

    (5) ( .(6)

    VOLUME

    LCD BRIGHT. .

    p. 0. ).

  • 7/25/2019 Ccd Trv65e

    28/108

    28

    When m onit oring on the LCD screenYou can turn the LCD panel over and move backto the camcorder with the LCD screen facing out[a]. You can adjust the angle of the LCD screen

    by turning the LCD screen up to 15 degrees [b].

    Using the remote comm anderYou can control playback using the suppliedRemote Commander. Before using the RemoteCommander, insert the R6 (size AA) batteries.

    Note on DISPLAY buttonPress DISPLAY to display the screen indicatorson the LCD screen. To erase the indicators, pressDISPLAY again. If the POWER switch is set toCAMERA, you can erase the indicator by

    pressing DISPLAY.

    Using headphones or an earphoneConnect headphones (not supplied) to the 2jack(CCD-TRV65E only) or an earphone (notsupplied) to the @jack (CCD-TRV3E/TRV15E/TRV23E/TRV35E only). You can adjust thevolume using VOLUME. When you useheadphones or an earphone, the speaker on thecamcorder is silent.

    To view the playback picture in the viewfinderClose the LCD panel. The viewfinder turns onautomatically. When using the viewfinder, youcan monitor sound only by using headphones oran earphone.To view on the LCD screen again, open the LCDpanel. The viewfinder turns off automatically.

    Note on the lens coverThe lens cover does not open when the POWERswitch is set to VTR/PLAYER. Do not open the

    lens cover manually. It may cause malfunction.

    Playing back a t ape

    [a] [b]

    15

    , [a]. ,

    15 [b].

    . R6( ).

    DISPLAY DISPLAY .

    DISPLAY. POWER - CAMERA, DISPLAY.

    () 2( CCD-TRV65E) ( ) @( CCD-TRV3E/TRV15E/TRV23E/TRV35E). VOLUME.

    , .

    . . . .

    . , POWER VTR/PLAYER. . .

  • 7/25/2019 Ccd Trv65e

    29/108

    29

    Basicoperations

    Various playback modes

    You can enjoy clear pictures on the LCD screenduring still, slow and picture search.(Crystal-clear still/slow/picture search)

    To view a still picture (playbackpause)Press Pduring playback. To resume playback,press Por (.

    To locate a scene (picture search)Keep pressing 0or )during playback. Toresume normal playback, release the button.

    To monitor the high-speed picturew hile advancing the t ape orrew inding (skip scan)Keep pressing 0while rewinding or )whileadvancing the tape. To resume normal playback,press (.

    To view the picture at 1/5 speed(slow playback) CCD-TRV15E/TRV23E/TRV35E/TRV65E onlyPress &on the Remote Commander during

    playback. To resume normal playback, press (.If slow playback lasts for about 1 minute, it shiftsto normal speed automatically.

    To select the playback sound CCD-TRV65E onlyChange the HiFi SOUND mode setting in themenu system.

    Notes on playbackNoise may appear when you use the crystal-

    clear still/slow/picture serch function to playback the tape recorded in LP mode.

    Streaks appear and the sound is muted in thevarious playback modes.

    When playback pause mode lasts for 5 minutes,the camcorder automatically enters stop mode.

    Horizontal noise appears at the centre or topand bottom of the screen when you play back atape in reverse. This is normal.

    You can play back the tapes recorded in the Hi8video system on the standard 8 mm camcorder(CCD-TRV3E/TRV15E/TRV23E/TRV35E

    only).

    Playing back a t ape

    -, .( -/- / )

    - ( ) P . P (.

    () 0 )

    . .

    ( ) 0 ) . (.

    1/5 ( ) CCD-TRV15E/TRV23E/TRV35E/TRV65E & . - (. - 1 , - .

    CCD-TRV65E HiFi SOUND .

    ,

    -/ / , LP.

    .

    5 , .

    , .

    , Hi8 8-( CCD-TRV3E/TRV15E/TRV23E/TRV35E).

  • 7/25/2019 Ccd Trv65e

    30/108

    30

    You can go to the end of the recorded portionafter you record and play back the tape to makethe transition between the last scene yourecorded and the next scene smooth. The tapestarts rewinding or fast-forwarding and the last 5

    seconds (10 seconds in LP mode) of the recordedportion play back. Then the tape stops at the endof the recorded picture (End Search).Note that the End Search function does not workonce you eject the cassette after you haverecorded on the tape.(1)While pressing OPEN, open the LCD panel.(2)Press END SEARCH.This function works when the POWER switch isset to either CAMERA or VTR/PLAYER.

    If you start recording after using END SEARCHOccasionally, the transition between the lastscene you recorded and the next scene may not

    be smooth.

    Searching for the endof the picture

    21 END SEARCH

    , , .

    , 5 (10 LP) . ( )., ,

    .(1) OPEN, (2) END SEARCH.

    POWER CAMERA, VTR/

    PLAYER.

    END SEARCH , ,

    .

  • 7/25/2019 Ccd Trv65e

    31/108

    31

    Advancedoper

    ations

    : , , 12/24 -

    . , .

    LR6( )

    12 24

    .

    NP-F330(),NP-F530, NP-F550,

    NP-F730, NP-F750,NP-F930, NP-F950

    EBP-L7

    - - - DC-V515A Sony

    Advanced operations

    Using alternativepow er sources

    You can choose any of the following powersources for your camcorder: battery pack, themains, alkaline batteries and 12/24 V car battery.

    Choose the appropriate power source dependingon where you want to use your camcorder.

    Place Power source Accessory to beused

    Indoors

    Outdoors

    In the car

    Notes on power sourcesDisconnecting the power source or removing

    the battery pack during recording or playbackmay damage the inserted tape.

    The DC IN jack has power source priority. This

    means that the battery pack cannot supply anypower if the mains lead is connected to the DCIN jack, even when the mains lead is notplugged into the mains.

    Using the mains

    (1)Open the DC IN jack cover, and connect theAC power adaptor to the DC IN jack on thecamcorder.

    (2)Connect the mains lead to the AC power

    adaptor.(3)Connect the mains lead to the mains.

    2, 31

    .

    DC IN . , , DC IN, .

    (1) DC IN

    -

    DC IN .(2)

    .(3) .

    -

    Supplied ACpower adaptor

    Battery pack NP-F330 (supplied),NP-F530, NP-F550,NP-F730, NP-750,NP-F930, NP-F950

    Battery caseEBP-L7

    Sony car batterycharger DC-V515A

    Mains

    Battery pack

    LR6 (size AA)Alkalinebattery

    12 V or 24 Vcar battery

  • 7/25/2019 Ccd Trv65e

    32/108

    32

    WARNINGThe mains lead must only be changed at aqualified service shop.

    PRECAUTION

    The set is not disconnected from the AC powersource (mains) as long as it is connected to themains, even if the set itself has been turned off.

    NoteKeep the AC power adaptor away from thecamcorder if the picture is disturbed.

    Using a car bat tery

    Use Sony DC-V515A car battery charger (not

    supplied). Connect the car battery cord to thecigarette lighter socket of a car (12 V or 24 V).Refer to the operating instructions of your car

    battery charger.

    To remove the car battery chargerThe car battery charger is removed in the sameway as the battery pack.

    This mark indicates that this

    product is a genuine accessory forSony video products.

    When purchasing Sony video products, Sonyrecommends that you purchase accessories withthis GENUINE VIDEO ACCESSORIES mark.

    Using alternat ive pow ersources

    -

    .

    . ( ) , , .

    , .

    Sony DC-V515A ( ).

    (12 24 ). .

    , .

    ,

    Sony.

    Sony, , ,

    GENUINE VIDEO ACCESSORIES.

  • 7/25/2019 Ccd Trv65e

    33/108

    33

    Advancedoper

    ations

    1

    5

    CAMERA VTR 2

    3

    MENU

    MENU

    4

    CAMERA SETD ZOOM16 : 9WIDESTEADYSHOTN. S. LIGHTWIND

    [MENU] : END

    CAMERA SETD ZOOM16 : 9WIDE

    OTHERSWORLD TIMEBEEPCOMMANDERDISPLAYREC LAMPINDICATOR

    OTHERSWORLD TIME

    OTHERSWORLD TIMEBEEPCOMMANDERDISPLAYREC LAMPINDICATOR RETURN

    ON

    OTHERSWORLD TIMEBEEPCOMMANDERDISPLAYREC LAMPINDICATOR

    0 HR

    OTHERSWORLD TIMECOMMANDERDISPLAYREC LAMPINDICATOR

    ONOFF

    OTHERSWORLD TIMEBEEPCOMMANDERDISPLAYREC LAMPINDICATOR RETURN

    ONOFF

    OTHERSWORLD TIMEBEEPCOMMANDERDISPLAYREC LAMPINDICATOR RETURN

    OFF

    0 HR

    VTR SETH i F i SOUNDEDITTBCDNRNTSC PB

    PLAYERPLAYER SET

    EDITNTSC PB

    .(1) MENU .(2)

    , .

    (3) , .

    (4) , . , 3 4. RETURN , 2 4.

    (5) MENU .

    Changing the modesettings

    You can change the mode settings in the menusystem to further enjoy the features andfunctions of the camcorder.(1)Press MENU to display the menu.(2)Turn the control dial to select the desired icon

    in the left side of the menu, then press thedial.

    (3)Turn the control dial to select the desireditem, then press the dial.

    (4)Turn the control dial to select the desiredmode, and press the dial. If you want tochange the other modes, repeat steps 3 and 4.If you want to change the other items, select

    RETURN and press the dial, then repeatsteps from 2 to 4.

    (5)Press MENU or select icon to erase the

    menu display.

  • 7/25/2019 Ccd Trv65e

    34/108

    34

    Note on the menu displayDepending on the model of your camcorder, themenu display may be different from that in thisillustration.

    Notes on changing the mode settingMenu items differ depending on the setting of

    the POWER switch to VTR/PLAYER orCAMERA.

    When you let the subject monitor the shot(mirror mode), the menu display does notappear.

    Select ing the m ode sett ing ofeach item

    It ems for bot h CAM ERA and VTR/PLAYER modes

    LCD B. L.* Normally select BRT NORMAL.Select BRIGHT when the LCD screen is dark.When you select BRIGHT, battery life is about 10percent shorter during recording.When you use the power sources other than the

    battery pack, BRIGHT is automatically selected,and LCD B.L. is not displayed in the menu.

    LCD COLOUR*Select this item to adjust the colour on the LCDscreen.

    REC MODE* Select SP when recording in SP (standard play)

    mode.Select LP when recording in LP (long play)

    mode.When a tape recorded on this camcorder in LPmode is played back on other types of 8mmcamcorders or VCRs, the playback quality maynot be as good as that on this camcorder.In PLAYER mode, this item is not displayed inthe menu (CCD-TRV3E/TRV15E/TRV23E/TRV35E only).

    Changing the mode sett ings

    .

    POWER VTR/PLAYER CAMERA.

    ( ) .

    CAMERA VTR/PLAYER

    LCD B.L.* BRT NORMAL. BRIGHT,

    . BRIGHT,

    10 . , BRIGHT LCD

    B.L. .

    LCD COLOUR* .

    REC MODE* SP SP

    ( ). LP LP

    ( ). ,

    LP, 8 , , . PLAYER -

    ( CCD-TRV3E/TRV15E/TRV23E/TRV35E).

  • 7/25/2019 Ccd Trv65e

    35/108

    35

    Advancedoper

    ations

    Changing the mode sett ings

    REMAIN* Select AUTO when you want to display the

    remaining tape barfor about 8 seconds after the camcorder is

    turned on and calculates the remainder of

    the tape.for about 8 seconds after a cassette is

    inserted and the camcorder calculates theremainder of the tape.

    for about 8 seconds after (is pressed inVTR/PLAYER mode.

    for about 8 seconds after DISPLAY ispressed to display the screen indicators.

    for the period of tape rewinding, forwardingor picture search in VTR/PLAYER mode.

    Select ON to always display the remaining tape

    indicator.

    LTR SIZE* Normally select NORMAL.Select 2x to display selected menu item by twice

    size of normal.

    BEEP* Select ON so that beeps sound when you start/

    stop recording, etc.Select OFF when you do not want to hear the

    beep sound.

    COMMANDER (CCD-TRV15E/TRV23E/TRV35E/TRV65E only)Select ON when using the supplied Remote

    Commander for the camcorder.Select OFF when not using the Remote

    Commander.

    DISPLAY* Normally select LCD. The display appears on

    the LCD screen.Select V-OUT/LCD to show the display both

    on the TV screen and LCD screen.

    INDICATOR* (CCD-TRV65E only)Select BL ON to light up the display window.Select BL OFF to turn off the back light of

    display window.When you use the AC power adaptor as a powersource, this item is not displayed in the menu.

    REMAIN* AUTO,

    8

    . 8

    . 8

    ( VTR/PLAYER. 8

    DISPLAY .

    ,

    VTR/PLAYER. ON

    .

    LTR SIZE* NORMAL. 2

    .

    BEEP* ON,

    , / ..

    OFF, .

    COMMANDER (T CCD-TRV15E/TRV23E/TRV35E/TRV65E) ON

    .

    OFF,

    .

    DISPLAY LCD.

    . V-OUT/LCD

    .

    INDICATOR* (CCD-TRV65E )

    BL ON . BL OFF

    . , .

  • 7/25/2019 Ccd Trv65e

    36/108

    36

    Items for CAMERA mode onlyD ZOOM*

    Select ON to activate digital zooming.Select OFF to not use the digital zoom. The

    camcorder goes back to 16x (CCD-TRV3E/

    TRV15E) or 18x (CCD-TRV23E/TRV35E/TRV65E) zoom.

    16:9WIDE* Normally select OFF.Select CINEMA to record in CINEMA mode.Select 16:9FULL to record in 16:9FULL mode.

    STEADYSHOT* (CCD-TRV35E/TRV65E only)Normally select ON.

    Select OFF to release the Steady Shot function.

    N.S.LIGHT* (CCD-TRV23E/TRV35E/TRV65E only)Normally select ON.Select OFF to not use the NightShot Light

    function.

    WIND (CCD-TRV65E only)Select ON to reduce wind noise when recording

    in strong wind.

    Normally select OFF.

    ORC TO SET*Select this item to automatically adjust therecording condition to get the best possiblerecording.If you have already performed this function,ORC ON is displayed.

    CLOCK SET*Reset the date or time.

    AUTO DATE* Select ON to record the date for 10 seconds

    after recording has started.Select OFF to not record the date.

    Changing the mode sett ings

    CAMERA

    D ZOOM * ON

    .

    OFF . 16- (CCD-TRV3E/TRV15E) 18- (CCD-TRV23E/TRV35E/TRV65E) .

    16 : 9 WIDE* OFF. CINEMA

    CINEMA. 16:9FULL

    16:9FULL.

    STEADYSHOT* ( CCD-TRV35E/TRV65E) ON. OFF

    .

    N.S.LIGHT* ( CCD-TRV23E/TRV35E/TRV65E) ON.

    OFF .

    WIND ( CCD-TRV65E) ON

    . OFF.

    ORC TO SET*

    . , ORC ON.

    CLOCK SET* .

    AUTO DATE* ON 10

    . OFF,

    .

  • 7/25/2019 Ccd Trv65e

    37/108

    37

    Advancedoper

    ations

    Changing the mode sett ings

    DEMO MODE* Select ON to make the demonstration appear.Select OFF to deactivate the demonstration

    mode.

    Notes on DEMO MODEDEMO MODE is set to STBY (Standby) at

    the factory and the demonstration startsabout 10 minutes after you set the POWERswitch to CAMERA without inserting acassette.Note that you cannot select STBY of DEMOMODE in the menu system.

    You cannot select DEMO MODE when acassette is inserted in the camcorder.

    If you insert a cassette during the

    demonstration, the demonstration stops.You can start recording as usual. DEMOMODE automatically returns to STBY.

    When NIGHTSHOT is set to ON,NIGHTSHOT appears in the viewfinderor on the LCD screen and you cannot selectDEMO MODE (CCD-TRV23E/TRV35E/TRV65E only).

    To look at the demonstration at onceEject the cassette, if inserted. Select ON of

    DEMO MODE and erase the menu display.The demonstration will begin.When you turn off the camcorder once,DEMO MODE automatically returns to STBY.

    WORLD TIME*Select this item to set the clock by a timedifference.

    REC LAMP* Select OFF when you do not want the camera

    recording/battery lamp at the front of the unitto light up.

    Normally select ON.

    DEMO MODE* ON .

    OFF .

    DEMO MODE DEMO MODE

    STBY ()

    10 POWER CAMERA .,

    STBY DEMO MODE .

    DEMO MODE, .

    ,

    . , . DEMO MODE STBY.

    NIGHTSHOT ON,NIGHTSHOT

    DEMO MODE( CCD-TRV23E/TRV35E/TRV65E).

    , . ON DEMO MODE . . DEMOMODE

    STBY.

    WORLD TIME* .

    REC LAMP* OFF, ,

    / .

    ON.

  • 7/25/2019 Ccd Trv65e

    38/108

    38

    Changing the mode sett ings

    It ems for VTR/PLAYER mode only HiFi SOUND (CCD-TRV65E

    only)Normally select STEREO.Select 1 or 2 to play back a dual sound track

    tape.

    / EDIT Select ON to minimize picture deterioration

    when editing.Normally select OFF.

    TBC* (CCD-TRV65E only)Normally select ON to correct for jitter.Select OFF to not correct for jitter. The picture

    may not be steady when played back.

    Note on TBC settingSet TBC to OFF when:Playing back a tape you have dubbed over.Playing back a tape on which you recorded

    the signal of a TV game or similar machine.The playback picture fluctuates.

    DNR* (CCD-TRV65E only)Normally select ON to reduce picture noise.Select OFF if the picture has a lot of movement,

    causing a conspicuous afterimage.

    / NTSC PB* Normally select ON PAL TV.Select NTSC 4.43 if your TV has the NTSC 4.43

    mode when playing back a tape recorded in theNTSC colour system.When you play back on a Multi System TV,select the best mode while watching the pictureon the TV.

    The following settings work only duringplaybackEDIT, HiFi SOUND, TBC, and DNR.

    * These settings are retained even when thebattery is removed, as long as the lithiumbattery is in place.

    VTR/PLAYER

    HiFi SOUND ( CCD-TRV65E) STEREO.

    1 2 .

    / EDIT ON

    . OFF.

    TBC* ( CCD-TRV65E) ON

    .

    OFF . .

    OFF, : ,

    .

    , .

    .

    DNR* ( CCD-TRV65E) ON

    . OFF,

    , .

    / NTSC PB* ON PAL TV. NTSC 4.43

    , NTSC, NTSC 4.43.

    , .

    EDIT, HiFi SOUND, TBC DNR.

    *

    , .

  • 7/25/2019 Ccd Trv65e

    39/108

    39

    Advancedoper

    ations

    When you shoot a subject with the light sourcebehind the subject or a subject with a lightbackground, use the BACK LIGHT function.

    Press BACK LIGHT. The cindicator appears in

    the viewfinder or on the LCD screen.

    [a]Subject is too dark because of backlight.

    [b]Subject becomes bright with backlightcompensation.

    Aft er shootingBe sure to release this adjustment condition bypressing BACK LIGHT again. The cindicatordisappears. Otherwise, the picture will be too

    bright under normal lighting condition.

    This function is also effective under thefollowing conditions:

    A subject with a light source nearby or a mirrorreflecting light.

    A white subject against a white background.Especially when you shoot a person wearingshiny clothes made of silk or synthetic fiber, hisor her face tends to become dark if you do notuse this function.

    To make a f ine adjustmentYou can adjust the exposure manually.However, when you adjust the exposure

    manually, BACK LIGHT does not operate.

    Shooting w ithbacklighting

    [a]

    [b]BACKLIGHT

    , BACK LIGHT.

    BACK LIGHT. c .

    [a] -

    .[b]

    .

    BACK LIGHT . c. .

    : ,

    .

    . , , , .

    . , , BACK LIGHT .

  • 7/25/2019 Ccd Trv65e

    40/108

    40

    [a] RECSTBY

    RECSTBY[b]

    CCD-TRV23E/TRV35E/TRV65E only

    Select ing t he f ader funct ion

    You can fade in or out to give your recording a

    professional appearance.When the picture fades in, the sound graduallyincreases. When the picture fades out, the soundgradually decreases.

    Using the FADERfunction

    FADER

    M.FADER (mosaic) /()

    STRIPE*

    BOUNCE(FADE IN only) /( )

    MONOTONEWhen fading in, the picture gradually changesfrom black and while to colour.When fading out, the picture gradually changesfrom colour to black and white.

    * CCD-TRV65E only

    FADER

    CCD-TRV23E/TRV35E/TRV65E

    /

    , . ,

    . , .

    MONOTONE - . -.

    * CCD-TRV65E

  • 7/25/2019 Ccd Trv65e

    41/108

    41

    Advancedoper

    ations

    1 2 LOCK

    START/STOP

    STANDBY

    FADER

    M.FADER

    STRIPE

    BOUNCE

    MONOTONE

    FADER

    Using t he f ader f unction

    When fading in [a](1)While the camcorder is in Standby mode,

    press FADER until the desired fade indicatorflashes.

    (2)Press START/STOP to start recording. Thefade indicator stops flashing.

    When fading out [b](1)During recording, press FADER until the

    desired fade indicator flashes.(2)Press START/STOP to stop recording. The

    fade indicator stops flashing, and thenrecording stops.

    The fading mode selected last is indicated first ofall.

    Using the FADER function

    Note on the bounce functionWhen you use the following functions orD ZOOM is set to ON in the menu system,BOUNCE indicator does not appear. Wide mode Functions using the PICTURE EFFECT button Functions using the PROGRAM AE button

    FADER

    /

    [a](1)

    FADER , / .

    (2) START/STOP . / .

    [b](1) FADER

    , / .

    (2) START/STOP . / .

    /, , .

    D ZOOM ON , BOUNCE .

    PICTURE EFFECT

    PROGRAM AE.

  • 7/25/2019 Ccd Trv65e

    42/108

    42

    To cancel t he fader f unct ionBefore pressing START/STOP, press FADERuntil the indicator disappears.

    When the date, time or title is displayed

    The date, time and title do not fade in or fadeout.

    When the START/STOP MODE switch is set to5SEC orYou cannot use the fader function.

    Note on the fader functionWhile using the bounce function, you cannot usethe following functions. Exposure

    Focus Zoom

    Using the FADER function FADER

    / START/STOP FADER , .

    , , .

    START/STOP MODE 5SEC / .

    / .

  • 7/25/2019 Ccd Trv65e

    43/108

    43

    Advancedoper

    ations

    CCD-TRV23E/TRV35E/TRV65E onlyThe NightShot function enables you to shoot asubject in a dark place. You can achieve asatisfactory recording of the ecology of nocturnalanimals for observation with this function.

    This function may record picture nearly inmonochrome.

    (1)While the camcorder is in Standby mode,

    slide NIGHTSHOT to ON.(2)Press START/STOP to start recording.

    and NIGHTSHOT indicators flash.

    To cancel the NightShot funct ionSlide NIGHTSHOT to OFF.

    Using t he NightShot Light

    When you set N.S.LIGHT to ON in the menusystem, the picture will be more clear.NightShot Light rays are infrared and aretherefore invisible. The maximum limit ofNightShot Light is about 3 meters (about 10 feet).

    Notes on the NightShotWhen you keep setting NIGHTSHOT to ON in

    normal recording, picture may be recorded inincorrect/unnatural colour.

    If focusing is difficult with the autofocus mode

    when using the NightShot function, focusmanually.

    Shooting in the dark(NightShot)

    C (H )

    NIGHTSHOT OFF.

    N.S. LIGHT

    ON , .

    . 3 ( 10 ).

    NIGHTSHOT

    ON ,

    / .

    , .

    CCD-TRV23E/TRV35E/TRV65E .

    . .

    (1)

    NIGHTSHOT ON.

    (2) START/STOP . NIGHTSHOT .

    OFF

    ONNightShot Light

    emitter/

  • 7/25/2019 Ccd Trv65e

    44/108

    44

    [b]

    CINEMA

    [a] [c]

    [e]

    [f]

    CINEMA

    16:9 FULL16:9 FULL

    [d]

    Select ing the desired m ode

    You can record a cinemalike picture (CINEMA)or a 16:9 wide picture to watch on the 16:9 wide-screen TV (16:9 FULL).

    CINEMABlack bands appear at the top and the bottom ofthe screen, and the viewfinder or LCD screen [a]and a normal TV screen [b]look wide. You canalso watch the picture without black bands on awide-screen TV [c].

    16:9 FULLThe picture in the viewfinder or LCD screen [d]or on a normal TV [e]is horizontallycompressed. You can watch the picture ofnormal images on a wide-screen TV [f].

    Using the w idemode funct ion

    (CINEMA) 16:9

    16:9(16:9 FULL).

    CINEMA , [a] [b].

    [c].

    16:9 FULL [d] [e] . [f].

  • 7/25/2019 Ccd Trv65e

    45/108

    45

    Advancedoper

    ations

    Using the w ide mode f unction

    You can select the wide mode (OFF, CINEMA,16:9FULL) in the menu system (p. 33).

    To cancel w ide modeSelect OFF in the menu system.

    To w atch the tape recorded in w idemodeTo watch the tape recorded in CINEMA mode,set the screen mode of the wide-screen TV tozoom mode. To watch the tape recorded in 16:9FULL mode, set it to full mode. For details, referto the operating instructions of your TV.Note that the picture recorded in 16:9 FULLmode looks compressed on a normal TV.

    Notes on wide modeIf wide mode is set to 16:9 FULL, the Steady

    Shot function does not work and theindicator flashes (CCD-TRV35E/TRV65E only).

    In wide mode, you cannot select the bouncefunction with FADER (CCD-TRV23E/TRV35E/TRV65E only).

    When you record in 16:9 FULL mode, the dateor time indicator will be widened on the wide-screen TV.

    If you dub a tape, the tape is copied in the samemode as the original recording.

    When recording, you cannot change the mode.

    Using the w ide mode f unction

    (OFF, CINEMA, 16:9FULL)

    . (. 33)

    OFF .

    , CINEMA

    . 16:9 FULL . .

    , , 16:9 FULL , .

    16:9 FULL, , ( CCD-TRV35E/TRV65E).

    FADER (CCD-TRV23E/TRV35E/TRV65E).

    16:9 FULL .

    ,

    , .

    .

  • 7/25/2019 Ccd Trv65e

    46/108

    46

    Select ing the best m ode

    You can select one of six PROGRAM AE (AutoExposure) modes to suit your shooting situation,referring to the following.

    Spotlight modeFor subjects in spotlight, such as at the theatre ora formal event.

    a Soft Portrait modeFor zooming in on a still subject in telephotomode, or for a subject behind an obstacle such as

    a screen. Creates a soft background for subjectssuch as people or flowers, and faithfullyreproduces skin colour.

    A Sports Lesson modeFor recording fast-moving subjects such as intennis or golf games.

    Beach & Ski modeFor people or faces in strong light or reflectedlight, such as at a beach in midsummer or on a

    ski slope.

    Sunset & Moon modeFor recording subjects in dark environments suchas sunsets, fireworks, neon signs, or general nightviews.

    Landscape modeFor distant subjects such as mountains or whenrecording a subject behind an obstacle such as awindow or screen.

    Using the PROGRAMAE funct ion

    a A

    PROGRAM AE

    PROGRAM AE ( ), , .

    , , .

    a

    , , , . , , .

    A , , .

    , , , .

    , , , , .

    ,

    , , , .

  • 7/25/2019 Ccd Trv65e

    47/108

    47

    Advancedoper

    ations

    Using t he PROGRAM AEfunction

    (1)Press PROGRAM AE.(2)Turn the control dial to select the desired

    PROGRAM AE mode.

    To turn of f program AEPress PROGRAM AE.

    Notes on focus settingIn the Spotlight, Sports lesson and Beach & Ski

    modes, you cannot take close-ups because thecamcorder is set to focus only on subjects in themiddle to far distance.

    In the Sunset & Moon and Landscape modes,the camcorder is set to focus only on distantsubjects.

    Flickering or changes in colour may occur inthe following modes if recording is carried outunder a discharge tube such as a fluorescentlamp, sodium lamp or mercury lamp. If thishappens, turn off program AE. Soft Portrait mode Sports Lesson mode

    Using t he PROGRAM AEfunction

    21

    Aa

    PROGRAM

    PROGRAM AE

    PROGRAM AE

    (1) PROGRAM AE.(2)

    PROGRAM AE,

    .

    PROGRAM AE PROGRAM AE.

    ,

    ,

    ,

    .

    .

    , , , , .

    ,

    .

  • 7/25/2019 Ccd Trv65e

    48/108

    48

    [a] [b] [c] [d]

    Focusing manually

    CCD-TRV23E/TRV35E/TRV65E only

    When to use manual focus

    In the following cases you should obtain better

    results by adjusting the focus manually.

    Insufficient light [a]Subjects with little contrast - walls, sky, etc. [b]Too much brightness behind the subject [c]Horizontal stripes [d]Subjects through frosted glassSubjects beyond nets, etc.Bright subject or subject reflecting lightShooting a stationary subject when using a

    tripod

    CCD-TRV23E/TRV35E/TRV65E

    ,

    .

    [a] - ,

    .. [b] [c] [d]

    ..

    ,

  • 7/25/2019 Ccd Trv65e

    49/108

    49

    Advancedoper

    ations

    Focusing manually

    When focusing manually, first focus in telephotobefore recording, and then reset the shot length.(1)Set FOCUS to MANUAL. The findicator

    appears in the viewfinder or on the LCDscreen.

    (2)Move the power zoom lever to the end of theT side in the optical zoom zone.

    (3)Turn the NEAR/FAR dial to achieve a sharpfocus.

    (4)Set the desired shot length using the powerzoom lever.

    Focusing manually

    1 2

    3

    TWW T

    4TWW T

    AUTOMANUAL

    INFINITY

    FAR

    NEAR

    , .

    (1) FOCUS MANUAL. f .

    (2) .

    (3) NEAR/FAR .

    (4) .

    To return to autofocus modeSet FOCUS to AUTO. The findicator in theviewfinder or on the LCD screen disappears.

    Shooting in relatively dark placesShoot at wide-angle after focusing in thetelephoto position.

    To record a very distant subjectPush FOCUS down to INFINITY. The lensfocuses on the most distant subject while FOCUSis held down. When it is released, manual focusmode is resumed.Use this function when shooting through awindow or a screen, to focus on a most distant

    subject.

    Note on manual focusingThe following indicators may appear:

    when recording a very distant subject.when the subject is too close to focus on.

    FOCUS AUTO. f

    . . FOCUS INFINITY. , FOCUS , .

    .

    . .

  • 7/25/2019 Ccd Trv65e

    50/108

    50

    [a] [b] [c] [d] [e] [f ]

    Enjoying pictureeffect

    Select ing picture ef fect

    You can make pictures like those of televisionwith the Picture Effect function.

    PASTEL [a]The contrast of the picture is emphasized, andthe picture looks like an animated cartoon.

    NEG. ART [b]The colour and brightness of the picture isreversed.

    SEPIAThe picture is sepia.

    B&WThe picture is monochrome (black and white).

    SOLARIZE [c]The light intensity is more clear, and the picturelooks like an illustration.

    MOSAIC [d]The picture is mosaic.

    SLIM [e]The picture expands vertically.

    STRETCH [f]The picture expands horizontally.

    , .

    PASTEL [a] ,

    , .

    NEG. ART [b] .

    SEPIA .

    B&W

    (-).

    SOLARIZE [c] , , .

    MOSAIC [d] .

    SLIM [e]

    .

    STRETCH [f] .

  • 7/25/2019 Ccd Trv65e

    51/108

    51

    Advancedoper

    ations

    Using picture ef fect function

    (1)Press PICTURE EFFECT.(2)Turn the control dial to select the desired

    picture effect mode.

    Enjoying picture ef fect

    To turn of f picture ef fectPress PICTURE EFFECT. The indicator in the

    viewfinder or on the LCD screen goes out.

    Note on the picture effectWhen you turn the power off, the camcorderreturns automatically to normal mode.

    1 2

    PASTEL

    NEG. ART

    SEPIA

    B & W

    SOLARIZE

    MOSAIC

    SLIM

    STRETCH

    PICTURE EFFECT

    (1) PICTURE EFFECT.(2)

    .

    PICTURE EFFECT.

    .

    , .

  • 7/25/2019 Ccd Trv65e

    52/108

    52

    [a] [b]

    Adjusting theexposure

    CCD-TRV23E/TRV35E/TRV65E only

    When to adjust the exposure

    Adjust the exposure manually under the

    following cases.

    [a]

    The background is too bright (back lighting)Insufficient light: most of the picture is dark

    [b]Bright subject and dark backgroundTo record the darkness faithfully

    Adjusting the exposure

    (1)Press EXPOSURE.(2)Turn the control dial to adjust the brightness.

    To return to automat ic exposuremodePress EXPOSURE again.

    1

    2 +

    +EXPOSURE

    CCD-TRV23E/TRV35E/TRV65E

    .

    [a]

    ()

    :

    [b]

    (1) EXPOSURE.(2)

    .

    EXPOSURE.

  • 7/25/2019 Ccd Trv65e

    53/108

    53

    Advancedoper

    ations

    Shooting with the sun behind youIf the light source is behind your subject, or in thefollowing situations, the subject will be recordedtoo dark.The subject is indoors and there is a window

    behind the subject.Bright light sources are included in the scene.When shooting a person wearing white or

    shiny clothes in front of a white background,the face will be recorded too dark.

    Shooting in the darkWe recommend you to use a video light (notsupplied). To get the best colour, you mustmaintain a sufficient light level.

    When you adjust the exposure manuallyBACK LIGHT does not work.If you change the PROGRAM AE mode, the

    camcorder automatically returns to automaticexposure mode.

    Adjust ing the exposure

    ,

    , .

    .

    .

    , ,

    , .

    ( ).

    .

    BACK LIGHT .

    PROGRAM AE,

    .

  • 7/25/2019 Ccd Trv65e

    54/108

    54

    Superimposing atitle

    You can select one of eight preset titles and twocustom titles. You can also select the language,colour, size and position of titles.

    Superimposing t itles

    (1)Press TITLE to display the title menu.(2)Turn the control dial to select , then press

    the dial.(3)Turn the control dial to select the desired title,

    then press the dial. The titles are displayed inthe language you selected.

    (4)Turn the control dial to select the colour, size,or position, then press the dial.

    (5)Turn the control dial to select the desireditem, then press the dial.

    (6)Repeat step 4 and 5 until the title is arranged

    as desired.(7)Press control dial again to complete thesetting.

    (8)When you want to stop recording the title,press TITLE.

    1,8

    2TITLE PRESET TITLEHELLO!HAPPY BIRTHDAYHAPPY HOLIDAYSCONGRATULATIONS!OUR SWEET BABYWEDDINGVACATIONTHE END

    [TITLE] : END

    PRESET TITLEHELLO!HAPPY BIRTHDAYHAPPY HOLIDAYSCONGRATULATIONS!OUR SWEET BABYWEDDINGVACATIONTHE END RETURN

    [TITLE] : END

    PRESET TITLEHELLO!HAPPY BIRTHDAY

    HAPPY HOLIDAYSCONGRATULATIONS!OUR SWEET BABYWEDDINGVACATIONTHE END RETURN

    [TITLE] : END

    TITLE

    THE END

    [TITLE] : END

    SIZE SMALL

    [TITLE] : END

    TITLE

    THE ENDSIZE LARGE

    THE END

    THE END

    3

    4

    6

    7

    . , , .

    (1) TITLE .

    (2) , .

    (3) , .

    .

    (4) , , .

    (5) ,

    .(6) 4 5 ,

    .

    (7) .

    (8) , TITLE.

  • 7/25/2019 Ccd Trv65e

    55/108

    55

    Advancedoper

    ations

    To superimpose the t it le f rombeginningAfter step 7, press START/STOP to startrecording.

    To superimpose the t it le w hile youare recordingAfter pressing START/STOP to start recording,start from step 1. In this case, beep is not heard.

    To select the language of preset t it leWhen you want to select the language, select

    before step 2. Then select language and return tostep 2.

    To use the custom t it leWhen you want to use the custom title, select

    in step 2.

    Notes on superimposing a titleIf you have not given any custom title,

    ... appears on the display.The FADER function works while the title is

    displayed, however, the title does not fade(CCD-TRV23E/TRV35E/TRV65E only).

    If you display the menu or title menu whilesuperimposing a title, the title is not recordedwhile the menu or title menu is being

    displayed.

    Title colour changes as follows :WHITE YELLOW VIOLET RED CYAN GREEN BLUE

    Title size changes as follows :SMALL LARGE

    Title position changes as follows :When you select the title size SMALL, you can

    choose 9 positions. When you select the title sizeLARGE you can choose 8 positions.

    Notes on the titleDepending on size or position of the title, both

    of date and time or either of them is notdisplayed.

    If you input 13 characters or more for a LARGEtitle, the title is automatically reduced into aproper size after the position is set.

    When the title is displayed, LCD BRIGHT and

    VOLUME indicators do not appear.

    Superimposing a title

    7 START/STOP .

    START/STOP 1. .

    , 2.

    2.

    , 2.

    Ec ,

    .... FADER

    , ( CCD-TRV23E/TRV35E/TRV65E).

    , .

    :WHITE YELLOW VIOLET RED CYAN GREEN BLUE

    :SMALL LARGE

    : SMALL, 9 . LARGE, 8 .

    - .

    13

    LARGE, .

    , LCD BRIGHT VOLUME .

  • 7/25/2019 Ccd Trv65e

    56/108

    56

    M aking your ow ntitles

    You can make up to two titles and store them inthe camcorder. We recommend to set thePOWER switch to VTR/PLAYER or eject thecassette before you begin.Your title can have up to 20 characters.

    (1)Press TITLE to display the title menu.(2)Turn the control dial to select , then press

    the dial.(3)Turn the control dial to select the first line

    (CUSTOM1) or second line (CUSTOM2), thenpress the dial.

    (4)Turn the control dial to select the column ofthe desired character, then press the dial.

    (5)Turn the control dial to select the desiredcharacter, then press the dial.

    (6)Repeat step 4 and 5 until you finish the title.

    (7)For finishing the titling work, turn the controldial to select SET, then press the dial.

    1 2TITLE

    3

    4

    6

    TITLE SET

    [TITLE] : END

    1 2TITLE SET

    [TITLE] : END

    TITLE SET

    [TITLE] : END

    3 4TITLE SET

    [TITLE] : END

    TITLE SET

    S

    [TITLE] : END

    7

    TITLE SET

    SUMMER CAMP IN LAKE

    [TITLE] : END

    TITLE SETCUSTOM1

    CUSTOM2

    [TITLE] : END

    ""

    ""

    TITLE SET

    RETURN

    [TITLE] : END

    TITLE SET RETURN

    [TITLE] : END

    . POWER VTR/PLAYER .

    20 .(1) TITLE

    .(2)

    , .(3)

    (CUSTOM1) (CUSTOM2), .

    (4) , .

    (5) , .

    (6) 4 5 , .

    (7) SET, .

  • 7/25/2019 Ccd Trv65e

    57/108

    57

    Advancedoper

    ations

    To edit a t it le you have storedIn step 3, select CUSTOM1 or CUSTOM2,depending on which title you want to edit, thenchange the title.

    NoteYou can not enter over 20 characters title.

    If you take 5 minutes or longer to entercharacters while a cassette is in the camcorderThe power goes off automatically. Charactersyou have entered remain. Turn STANDBY downonce and then up again, then proceed from step1.

    To delete a t itle

    In step 4, turn the control dial to select [M] thenpress the dial. The last character is erased. Repeatthis step until all characters are deleted.

    M aking your ow n titles

    3 CUSTOM1 CUSTOM2 , ,

    .

    , 20 .

    5 , . ,

    , . STANDBY ,

    1.

    4 , [M], . . , .

  • 7/25/2019 Ccd Trv65e

    58/108

    58

    /

    Recording w ith thedate/time

    Before you start recording or during recording,press DATE or TIME. You can record the date ortime displayed in the viewfinder or on the LCDscreen with the picture. Press DATE (or TIME),then press TIME (or DATE) to display the date

    and time together.The clock is set at the factory to Sydney time forAustralia and New Zealand models, to Tokyotime for the models sold in Japan and to HongKong time for the other models. You can resetthe clock in the menu system.

    To stop recording w ith the date and/or timePress DATE and/or TIME again. The date and/or time indicator disappears. The recordingcontinues.

    4 7 1998

    17:30:00

    17:30:004 7 1998

    DATE TIME

    DATETIME

    /

    DATE TIME. ,

    . DATE( TIME), TIME ( DATE)

    .

    , , , . .

    / DATE / TIME . / . .

  • 7/25/2019 Ccd Trv65e

    59/108

    59

    Advancedoper

    ations

    Optimizing therecording condit ion

    Use this feature to check the tape conditionbefore recording, so that you can get the bestpossible picture (ORC).(1)While the camcorder is in Standby mode,

    press MENU to display the menu.

    (2)Turn the control dial to select , then pressthe dial.

    (3)Turn the control dial to select ORC TO SET,then press the dial.START/STOP KEY flashes.

    (4)Press START/STOP.The camcorder takes about 5 seconds to checkthe tape condition and then returns toStandby mode.

    Each t ime you insert the casset te

    Perform the above procedures.

    Notes on the ORC functionWhen you set ORC TO SET, the recording on

    the tape is erased for about 0.1 second so thatthe camcorder can check the tape condition. Becareful when you use a recorded tape. The 0.1second blank is erased if you record from thepoint where you set ORC TO SET for more than2 seconds, or if you record over the blank.

    You cannot use this function on a tape with the

    red mark on the cassette exposed.

    1

    4 STBY 0:00:00ORC

    MENU

    LOCK

    START/STOP

    STANDBY

    START/STOP

    KEY

    3 TAPE SETREC MODEORC TO SET REMAIN RETURN

    TAPE SETREC MODEORC TO SET REMAIN RETURN

    SPTAPE SET

    REC MODEORC TO SET REMAIN

    2

    , ,

    (ORC).(1)

    , MENU .

    (2) , .

    (3) ORC TO SET, .START/STOP KEY .

    (4) START/STOP. 5 ,

    .

    ,

    .

    ORC ORC TO SET,

    0,1 , , . , . 0,1- , , ORC TO SET , 2, .

    , .

  • 7/25/2019 Ccd Trv65e

    60/108

    60

    CCD-TRV35E/TRV65E onlyWhen the Steady Shot function is working, thecamcorder compensates for camera-shake.

    You can release the Steady Shot function when

    you do not need to use the Steady Shot function.The indicator appears in the viewfinder or onthe LCD screen. Do not use the Steady Shotfunction when shooting a stationary object with atripod.You can select ON or OFF in the menu system(p. 33).

    To act ivate t he Steady Shot funct ionagainSet STEADYSHOT to ON in the menu system.

    Notes on the Steady Shot functionThe Steady Shot function will not correct

    excessive camera-shake.When you set STEADYSHOT to ON or OFF in

    the menu system, the exposure may fluctuate.Steady Shot does not operate in 16:9 FULL

    mode. If you set STEADYSHOT to ON in themenu system, the indicator flashes.

    Releasing the STEADYSHOT function

    Connect the camcorder to your TV or VCR towatch the playback picture on the TV screen.When monitoring the playback picture byconnecting the camcorder to your TV, werecommend you to use the mains for the powersource.

    While playing back on a TV screen, close theLCD panel. Otherwise, picture distortion mayoccur.

    Watching on a TVscreen

    STEADY SHOT

    CCD-TRV35E/TRV65E , .

    , .

    . . ON OFF

    (. 33).

    STEADYSHOT ON .

    . STEADYSHOT

    ON OFF .

    16:9 FULL.

    STEADYSHOT ON , .

    .

    .

    , . .

  • 7/25/2019 Ccd Trv65e

    61/108

    61

    Advancedoper

    ations

    (not supplied)/

    : Signal flow/

    CCD-TRV65E

    (not supplied)/( )

    Connect ing direct ly t o a TV/VCRw ith Video/Audio input jacks

    When connecting the A/V connecting cable,make sure you connect the plug to jacks of thesame colour.Open the jack cover. With using the supplied A/V connecting cable, connect the camcorder to theLINE IN inputs on the TV or VCR connected tothe TV. Set the TV/VCR selector on the TV toVCR. When connecting to the VCR, set the inputselector on the VCR to LINE.

    Watching on a TV screen

    CCD-TRV3E/TRV15E/TRV23E/TRV35E

    : Signal flow/

    VIDEO

    AUDIO

    IN

    VIDEO

    AUDIO

    [a]

    [b]

    S VIDEO

    S VIDEO

    VIDEO

    AUDIO

    IN

    VIDEO

    AUDIO

    / /

    / , . .

    LINE IN

    /. TV/

    VCR VCR.

    LINE.

  • 7/25/2019 Ccd Trv65e

    62/108

    62

    CCD-TRV65E onlyIf your TV or VCR has an S video jack, connectusing the S video cable (not supplied) [a]toobtain a high quality picture . If you are going toconnect the camcorder using the S video cable

    (not supplied) [a], you do not need to connect theyellow (video) plug of the A/V connecting cable[b].

    If your TV or VCR is a monaural type CCD-TRV65E onlyConnect only the white plug for audio on boththe camcorder and the TV or the VCR. With thisconnection, the sound is monaural even in stereomodel.

    To connect to a TV or VCR without Video/Audio input jacksUse an RFU adaptor (not supplied).

    Watching on a TV screen

    CCD-TRV65E

    S-, S- ( ) [a] .

    S- () [a], () / [b].

    CCD-TRV65E

    . , .

    / - ( ).

  • 7/25/2019 Ccd Trv65e

    63/108

    63

    Advancedoper

    ations

    Edit ing onto anothertape

    You can create your own video programme byediting with any other h8 mm, HHi8, jVHS, kS-VHS, VHSC, KS-VHSCor lBetamax VCR that has video/audio inputs.

    Before edit ing

    Connect the camcorder to the VCR using thesupplied A/V connecting cable.Set the input selector on the VCR to LINE, ifavailable.Set EDIT to ON in the menu system (p. 33).

    Starting editing

    Turn down the volume of the camcorder whileediting. Otherwise, picture distortion may occur.(1)Insert a blank tape (or a tape you want to

    record over) into the VCR, and insert yourrecorded tape into the camcorder.

    (2)Play back the recorded tape on the camcorderuntil you locate the point just before whereyou want to start editing, then press Pto setthe camcorder in playback pause mode.

    (3)On the VCR, locate the recording start pointand set the VCR in recording pause mode.

    (4)First press Pon the camcorder, and after afew seconds press Pon the VCR to startediting.

    To edit more scenesRepeat steps 2 to 4.

    To superimpose the t it le w hile youare editingYou can superimpose the title while you areediting. Refer to Superimposing a title (p. 54).

    To stop edit ingPress pon both the camcorder and the VCR.

    Note on Fine Synchro EditIf you connect a video deck that has the FineSynchro Edit feature to the LANC ljack of thecamcorder, using a LANC cable (not supplied),the edit will be even more precise.

    h8 , HHi8,jVHS,kS-VHS, VHSC, KS-VHSC lBetamax, /.

    , /. LINE, . EDI ON (.

    33).

    . .(1) ( ,

    )

    .(2)

    ,

    , , P .

    (3) .

    (4) P , P

    .

    2 4.

    . . (. 54)

    p .

    ,

    LANC l LANC ( ), .

  • 7/25/2019 Ccd Trv65e

    64/108

    64

    Recording f rom aVCR or TV

    CCD-TRV65E onlyYou can record a tape from another VCR or a TVprogramme from a TV that has video/audiooutputs. Connect the camcorder to the VCR orTV using the supplied A/V cable. Turn down the

    volume of the camcorder while editing.Otherwise, picture distortion may occur.(1)While pressing the small green button on the

    POWER switch, set it to VTR.(2)Set DISPLAY to LCD in the menu system.

    Then press rREC and the button on the righttogether on the camcorder at the point whereyou want to start recording.

    In recording and recording pause mode, S videoand VIDEO/AUDIO jacks automatically work asinput jacks.

    If your VCR or TV has an S video jack, connectusing the S video cable (not supplied) [a]toobtain a high quality picture.

    (not supplied)/( )

    If your VCR or TV is a monaural type, connectonly the white plug for audio on both thecamcorder and the VCR or TV.If your VCR or TV does not have an S VIDEOOUT jack, connect cable [b]. Do not connect the Svideo cable (not supplied) [a]to the camcorder.

    To stop recordingPress p.

    Note on recordingYou cannot record a picture that has a copyrightcontrol signal for copyright pro


ccd lecture1

ccd lecture1

ASSETTI RUOTE CCD€¦ · Car wheel alignment system Allineamento ruote autovetture PROFESSIONAL CCD WHEEL ALIGNERS ASSETTI RUOTE CCD PROFESSIONALI Robosterz® The AM family of CCD

ASSETTI RUOTE CCD€¦ · Car wheel alignment system Allineamento ruote autovetture PROFESSIONAL CCD WHEEL ALIGNERS ASSETTI RUOTE CCD PROFESSIONALI Robosterz® The AM family of CCD

CCD Fothometry

CCD Fothometry

Pennsylvania Animal Agriculture Program Assessment Interim ... · Conservation District (CCD), the Lebanon CCD, the Snyder CCD, and the Union CCD. ... programs are consistent with

Pennsylvania Animal Agriculture Program Assessment Interim ... · Conservation District (CCD), the Lebanon CCD, the Snyder CCD, and the Union CCD. ... programs are consistent with

Manual CCD

Manual CCD

CCD Profile

CCD Profile

Astronomy 211 Fall 2013 The CCD detector...The CCD detector • Introduction • History of the CCD • How does a CCD work ? • Advantages of CCDs Adapted from Dib & Surdej and Henneman,

Astronomy 211 Fall 2013 The CCD detector...The CCD detector • Introduction • History of the CCD • How does a CCD work ? • Advantages of CCDs Adapted from Dib & Surdej and Henneman,

CCD - AGH University of Science and Technologypatenty.bg.agh.edu.pl/warsztaty/ccd Copy.pdf · latest version of the CCD. CCD offers consolidated access to citation data from IP5 Offices

CCD - AGH University of Science and Technologypatenty.bg.agh.edu.pl/warsztaty/ccd Copy.pdf · latest version of the CCD. CCD offers consolidated access to citation data from IP5 Offices

CCD Manual

CCD Manual

TOSHIBA CCD LINEAR IMAGE SENSOR CCD(Charge Coupled … · TCD1304DG 1 2004-01-06 TOSHIBA CCD LINEAR IMAGE SENSOR CCD(Charge Coupled Device) TCD1304DG The TCD1304DG is a high sensitive

TOSHIBA CCD LINEAR IMAGE SENSOR CCD(Charge Coupled … · TCD1304DG 1 2004-01-06 TOSHIBA CCD LINEAR IMAGE SENSOR CCD(Charge Coupled Device) TCD1304DG The TCD1304DG is a high sensitive

Ccd group pd

Ccd group pd

Conceptualising ccd

Conceptualising ccd

URBANIZED AREA OUTLINE MAP (CENSUS 2000) Seattle, WA · Granite Falls CCD Oak Bay CCD South Whidbey CCD Skykomish CCD Snohomish CCD Olympia CCD Buckley Edgewood Tacoma Burien Tukwila

URBANIZED AREA OUTLINE MAP (CENSUS 2000) Seattle, WA · Granite Falls CCD Oak Bay CCD South Whidbey CCD Skykomish CCD Snohomish CCD Olympia CCD Buckley Edgewood Tacoma Burien Tukwila

Solar Influences Data analysis Center / Royal Observatory Belgium Caméras CCD CCD camera’s Caméras CCD CCD camera’s Télescope en lumière blanche.

Solar Influences Data analysis Center / Royal Observatory Belgium Caméras CCD CCD camera’s Caméras CCD CCD camera’s Télescope en lumière blanche.

Ccd Cardamom

Ccd Cardamom

Govermental Unit Reference Map - Census.gov · Lady Lake CCD Tavares CCD Howey-in-the-Hills-Okahumpka CCD Eustis CCD Bushnell-Center Hill CCD Leesburg CCD Clermont CCD Leesburg CCD

Govermental Unit Reference Map - Census.gov · Lady Lake CCD Tavares CCD Howey-in-the-Hills-Okahumpka CCD Eustis CCD Bushnell-Center Hill CCD Leesburg CCD Clermont CCD Leesburg CCD

Manual CCD-TR(v) Plus CCD-TR515E Service Manual

Manual CCD-TR(v) Plus CCD-TR515E Service Manual

Report CCD

Report CCD

jamilian.net · c' I J flatbed JI . ,sL.Þl charge-coupled . . storage phosphor plate (SPP) charge coupled detector (CCD) l; , CCD ID . CCD spp . , CCD k 1 -G Jl

jamilian.net · c' I J flatbed JI . ,sL.Þl charge-coupled . . storage phosphor plate (SPP) charge coupled detector (CCD) l; , CCD ID . CCD spp . , CCD k 1 -G Jl

Observing Asteroids CCD

Observing Asteroids CCD