Catalogue Export 2019 EN - GHM Eclatec

5
ZENDA indicates a magical trilogy. By day, the balance and lightness of its line suggest a discrete and effective message, like a resolutely contemporary reminder. By night, the passer-by places all of their confidence in the reassuring path of its alignments, as if ZENDA was showing the way. Finally, ZENDA is the successful synthesis of technical performance of LED lighting and the new plastics that this technology uses. ZENDA can house, optionally, 21 or 30 LEDs, two colour temperatures, adjustable power levels and three distributions (ECa wide circular lighting, ERE narrow road lighting, ERL wide road lighting). ZENDA Luminaire design: ECLATEC ZENDA SOURCE

Transcript of Catalogue Export 2019 EN - GHM Eclatec

Page 1: Catalogue Export 2019 EN - GHM Eclatec

ZENDA indicates a magical trilogy. By day, the balance and lightness of its line suggest a discrete and effective message, like a resolutely contemporary reminder.

By night, the passer-by places all of their confi dence in the reassuring path of its alignments, as if ZENDA was showing the way. Finally, ZENDA is the successful synthesis of technical performance of LED lighting and the new plastics that this technology uses.

ZENDA can house, optionally, 21 or 30 LEDs, two colour temperatures, adjustable power levels and three distributions (ECa wide circular lighting, ERE narrow road lighting, ERL wide road lighting).

ZENDALuminaire design: ECLATEC

ZENDA SOURCE

Page 2: Catalogue Export 2019 EN - GHM Eclatec

33

Page 3: Catalogue Export 2019 EN - GHM Eclatec

IP 66 IK 10RoHS

APPLICATIONS

• Mounting: top, plate and wall-mounted

• Urban routes, pedestrian walkways, cycle paths, squares, parks, pedestrian areas

and residential lighting.

• Recommended heights: 4 to 5 m

DESCRIPTION

• Injection die-cast aluminium body

• Polyester powder coating, any colour available

• IP 66

• IK 10 - 40 joules

• Class I or II

• Luminaire pre-wired in the factory (6 m)

• ZENDA source with UNILENS lenses

• Colour temperature: 4000 K and 3000 K

CITIZEN REFERENCE POINTS

• Materials used: Aluminium 82%, Other 5%, Steel 6%, Plastic 7%

• Complies with the RoHS directive

• High recyclability rate

WATERPROOFING

• IP 66 waterproofi ng in accordance with the standard EN 60 529

• Extruded silicone gasket

• Entry sleeve

• Breathing system with activated carbon fi lter

MECHANICAL INTERFACES

• Top spigot fi xation for pole Ø 60/62 mm (see page 278 - D)

• Lateral top spigot fi xation for pole Ø 60/62 mm

• Pathway bracket with fastening plate

• Wall-mounted bracket with fastening plate

• Luminaire tilted at 0° or 10°

ZENDA

ZENDA ZENDA :

4-5 m

tilt 0° tilt 10°

pathway bracket with

fastening plate

Fastened by lateral top spigot

LED LUMINAIRES

Page 4: Catalogue Export 2019 EN - GHM Eclatec

PHOTOMETRIC DISTRIBUTIONS

MAINTENANCE

Glossary:

• Standard • Option - Not available

E/L/P: Lighting/Luminance/Projection, R/C/T/F/P: Road/Circulation/Path/Beam/Pedestrian walkway, E/S/L/A/D/G: Narrow/

Standard/Wide/Asymmetric/Right/Left, POLEDRIVE: preset at the bottom of the pole / night diming calculator with 2

confi gurable thresholds, set in the bottom of the pole, Dimming 5: night diming calculator with 5 confi gurable thresholds,

Motion P: Confi gurable offset presence detector at the foot of the pole, Motion COM: Wireless detection and communication,

DALI: compatible with the DALI protocol, CLO: Constant Lumen Output option

Opening and closing

Opening by screws

Lighting equipment maintenance

Direct access to the gears by remo-

ving the canopy

Maintenance of the LED strips

Direct access to the Led bars by

removing the bowls

KEY POINTS

ZENDA

ApplicationsUrban routes, pedestrian walkways, cycle paths,

squares, parks, pedestrian areas and residential lighting.

Recommended heights 4 to 5 m

Mounting Post-top fastening on pole Ø 60/62 mm

Dimensions

Depth

width

height

777 mm

798 mm

463 mm

Weight 12,3 kg

Windage area 0,07 m2

Sources Specifi c

Sources accessDirect access to the Led bars by removing the bowls,

and to the gears by removing the canopy

Optics and light

distribution optionsUNILENS: ERE, ERL, ECL

OP

TIO

NS

Confi gurable current •

DALI (construction) •

Dimming 5 (preset) •

CLO (preset)Compatible with standard version, Dimming 5 or DALI

option

Motion COM (setting on site)

Motion P (set in the bottom of the pole)

POLEDRIVE(set in the bottom of the pole)

- 90 ° 90 °

- 45 ° 45 °

0

cd/klm

ZENDA ECL

Imax = 475 cd/klm

480 0 °

C90 - C270

C0 - C180

C15 - C165

Isolux curve

Pole setting

- 90 ° 90 °

- 45 ° 45 °

0

cd/klm

ZENDA ERE

Imax = 932 cd/klm

940 0 °

C90 - C270

C0 - C180

C10 - C170 Pole setting

Isolux curve

- 90 ° 90 °

- 45 ° 45 °

0

cd/klm

ZENDA ERL

Imax = 896 cd/klm

900 0 °

C90 - C270

C0 - C180

C20 - C160 Pole setting

Isolux curve

60

463

Ø 60

Ø 50

Ø 40

320

60

777

92

798

314

Tilt 10°

Tilt 10°

210

22

10

10

105

73

270

351

945

798

Zenda luminaire

Zenda wall-mounted

35

Page 5: Catalogue Export 2019 EN - GHM Eclatec

LEDLuminairesModern Streetfurniture

Waste bins Bollards Light

tree grill

Bollards

Classic poles cast iron Steel poles

Modern poles cast iron

Defence bollards Drinking water fountain

Seating

TRAMWAY POLES

Modern LED luminaires

Classic luminaires

Classic street furniture

RueAntoineDurenne 41rueLafayette52220Sommevoire 54320MaxevilleFrance FranceTelnr.0033325552303 Telnr.0033383393828

Exportinternet:www.ghm-eclatec.com Emailexport:[email protected]