Catalogo Eminence 2011

2 011pro audio • hf devicescomponents • guitar • bass

There’s no doubt the guitar speaker is one of the most important pieces of the tone puzzle. With no practical way to demo them in a retail environment, it has always been a challenge for retailers to sell replacement or upgrade speakers. Until NOW, that is.

The Eminence Tone Center, consisting of a 4x12 cabinet loaded with four uniquely voiced guitar speakers and a foot switch, finally offers the consumer the ability to play through a selection of speakers by plugging in any amplifier of their choice. With full color graphics and product information cards for each model, this retail display makes a consumer’s purchase decision easy. Learn more at www.eminence.com.

it’s never been easier to

We are proud of our long history of manufacturing loudspeakers here in Eminence, Kentucky.

Each product is made by hand with quality, value and service in mind. We know that real

performance and tone only come from pride, passion and attention to detail. We all thank you

for helping to keep us doing what we love, and for keeping the American dream alive!

guitarexclusive fdm technology . . . . . . . 33acoustic series . . . . . . . . . . . . . . . . . . 34 legend series . . . . . . . . . . . . . . . . . . . . 35Patriot series . . . . . . . . . . . . . . . . . . . . 37redcoat series . . . . . . . . . . . . . . . . . . . 42Bass guitar . . . . . . . . . . . . . . . . . . . . . . 46

referenceguitar sPeaKer tone guide . . . . . . . . 50loudsPeaKer data exPlained . . . . . . 52designing enclosures . . . . . . . . . . . . 54

pro audioProfessional series . . . . . . . . . . . . . . 4neodymium series . . . . . . . . . . . . . . . . 12american standard . . . . . . . . . . . . . . 18hf drivers . . . . . . . . . . . . . . . . . . . . . . . 28suPertWeeters . . . . . . . . . . . . . . . . . . . 29horn flares . . . . . . . . . . . . . . . . . . . . . 29crossovers . . . . . . . . . . . . . . . . . . . . . 31

thank you for considering eminence products!

For a complete list of Eminence distributors and to access our US dealer finder, please visit http://www.eminence.com

footnotes

* Please consult www.eminence.com for sPecifications of models with alternative imPedances.

** multiPle units exceed Published rating evaluated under eia 426a noise source and test standard while in a free-air, nontemPera-ture-controlled environment.

*** the average outPut across the usable frequency range when aPPlying 1w/1m into the nominal imPedance. ie: 2.83 v/8 ohms, 4 v/16 ohms. eminence resPonse curves are measured under the following conditions: all sPeakers are tested at 1w/1m using a variety of test set-uPs for the aPProPriate imPedance | lms using 0.25" suPPlied microPhone (software calibrated) mounted 1m from wall/baffle | 2 ft. x 2 ft. baffle is built into the wall with the sPeaker mounted flush against a steel ring for minimum diffraction | hafler P1500 trans-nova amPlifier | 2700 cu. ft. chamber with fiberglass on all six surfaces (three with custom-made wedges).

**** beta 8cx, 10cx, 12cx and acoustinator™ cx2008 are coaxial sPeakers with tweeter sold seParately. Published usable frequency resPonse contingent uPon use of aPt 50 hf driver.

***** multiPle units exceeded Published rating evaluated under aes500 and aes800 noise sources and test standards while mounted on eminence’s ti-2000 horn in a nontemPerature-controlled environment.

****** the average on axis outPut across the entire usable frequency range when aPPlying 1w/1m into the nominal imPedance while mounted on the h2ea horn measured with: lms (software calibrated) using a 0.25" [6.4mm] suPPlied microPhone mounted 1m from horn mouth, hafler P1500 trans-nova amPlifier, 2700 cu. ft. chamber w/fiberglass on all six surfaces (three with custom made wedges). Plane-wave tube resPonse and imPedance curves measured with lms on a 0.75" [19.1mm] diameter tube with adaPter to allow for smooth transition to throat diameter and 1w/1m into nominal imPedance. Prices and sPecifications subject to change without notice.

We are a full line stocking distributor of Eminence components since 1978.Same day shipping—call us for a quote today! 800-321-6306

martinsoundpro.com

Professional seriesif you’ve heard live audio, you’ve heard the eminence Professional series loudspeakers. From the pump-it-up sounds of a sports arena, to the latest hits played live by the greatest artists, even the Star-Bangled Banner proudly booming onto the deck of an aircraft carrier. You’ll hear them in the local VFW Hall and Moose Lodge. And being reverend or rockin’ in places of worship. No wonder that for over 40 years, Eminence Professional series loudspeakers have been the brand of choice in audio systems throughout the world.

There are 26 unique models in our Professional series so it’s easy to find yours. From heavy-duty subwoofers, low distortion woofers, and super high-power woofers to lightweight neodymium transducers in truncated frames for line arrays. Each is designed with your specific needs in mind. Every speaker comes standard with Made in the USA pride, and is backed by a Seven Year Warranty against manufacturer’s defects*. There are over 1,200 USA dealers and distributors worldwide. Visit www.eminence.com to find a dealer near you.

*Warranty policy may vary outside of the continental United States and Canada. Check with your local distributor for warranty details.

no other name in loudspeakers has been so widely depended upon for performance and reliability.

The signature of each Eminence Professional model is its cast aluminum Eminence chassis. Lightweight and strong, aluminum keeps the magnetic field inside the gap. That means the motor strength is higher and the stray magnetic field lower. We coat the chassis and all metal parts with an epoxy-acrylic finish. Our in-house e-coat process lets us control the thickness of that coating to within 0.001”. That’s the diameter of a human hair and it’s critical when working with close tolerance transducer motor designs. We then add front and rear sealing gaskets on each model to allow front or rear loading.

5

ref

lex

Bo

x

sc

oo

P l

oa

din

g

ho

rn

lo

ad

ing

su

BW

oo

fer

us

ag

e

Wo

ofe

r u

sa

ge

mid

Ba

ss

us

ag

e

mid

ra

ng

e u

sa

ge

clo

sed

Bo

x

comPatiBilitydELTA PrO 8A j j j j j

dELTA PrO 8B j j j j j

KAPPA PrO 10A j j j j

dEFiNiMAx 4012HO j j j j j j j

dELTA PrO 12A j j j j j j

KAPPA PrO 12A j j j j j

LAB 12 j j j j

dEFiNiMAx 4015LF j j j j j j

dELTA PrO 15A j j j j j

KAPPA PrO 15A j j j j

KAPPA PrO 15LF j j j j j

KiLOMAx PrO 15A j j j j j

LAB 15 j j j j

OMEgA PrO 15A j j j j j

dEFiNiMAx 4018LF j j j j j

dELTA PrO18A j j j j j

dELTA PrO18C j j j j j

KiLOMAx PrO 18A j j j j

OMEgA PrO 18A j j j j j

OMEgA PrO 18C j j j j j

SigMA PrO 18A j j j j j

nominal Basket diameter

nominal impedance*

Power rating**

Watts

music Program

resonance

usable frequency range

sensitivity***

magnet Weight

gap height

voice coil diameter

resonant frequency (fs)

dc resistance (re)

coil inductance (le)

mechanical Q (Qms)

electromagnetic Q (Qes)

total Q (Qts)

compliance equivalent volume (vas)

Peak diaphragm displacement volume (vd)

mechanical compliance of suspension (cms)

Bl Product (Bl)

diaphragm mass inc. airload (mms)

efficiency Bandwidth Product (eBP)

maximum linear excursion (xmax)

surface area of cone (sd)

maximum mechanical limit (xlim)

recommended enclosure volume

sealed

vented

driver volume displaced

overall diameter

Baffle hole diameter

front sealing gasket

rear sealing gasket

mounting holes diameter

mounting holes B.c.d.

depth

net Weight

shipping Weight

coil construction

coil former

magnet composition

core details

Basket materials

cone composition

cone edge composition

dust cap composition

sPecification

thiele & small Parameters

mounting information

materials of construction

6

Professional series

* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.

delta Pro-8a KaPPa Pro-10a definimax™ 4012ho

8’’, 203mm

8 or 16 ohms

225W

450W

69hz

100hz-3khz

97.8

59 oz.

0.310’’, 7.95mm

2’’, 50.8mm

69hz

5.4

0.82mh

6.43

0.20

0.22

18.32 liters / .65 cu.ft.

66cc

0.35mm/n

14.1 t-m

19 grams

307

3.0mm

218.2 cm2

8.0mm

8-16 liters / .30-.60 cu.ft.

10-16 liters/.40-.60 cu.ft.

63.7 cu.in / 1.04 liters

8.02’’, 203.71mm

7.36’’, 186.9mm

fitted as standard

fitted as standard

0.28’’, 7.1mm

8.60’’, 218.4mm

3.75’’, 95mm

10.0 lbs, 4.5 kg

11 lbs, 4.9 kg

copper voice coil

Polyimide former

ferrite magnet

vented and extended core

die-cast aluminum basket

Paper cone

cloth cone edge

solid composition paper dust cap

10”, 254mm

8 ohms

500W

1000W

46hz

102hz-2khz

97

80 oz.

0.375”, 9.53mm

3”, 76.2mm

46hz

6.50

1.15mh

10.10

0.20

0.20

52.2 liters / 1.8 cu.ft.

110cc

0.31mm/n

18.8 t-m

38 grams

230

3.2mm

344.9 cm2

10.9mm

7-9.9 liters/0.25-0.35 cu.ft.

12-28 liters/0.43-1 cu.ft.


10.25”, 260.4mm

9.13”, 231.8mm

fitted as standard

fitted as standard

0.28”, 7.1mm

9.63”, 244.5mm

4.33”, 110mm

15.3 lbs., 6.9 kg

16.4 lbs., 7.4 kg

copper voice coil

Polyimide former

ferrite magnet

vented core


Paper cone

cloth cone edge


12”, 304.8mm

8 ohms

600W

1200W

46hz

49hz-2.5khz

94

109 oz.

0.375”, 9.53mm

4”, 101.6mm

46hz

5.85

1.17mh

5.74

0.38

0.35


342cc

0.14mm/n

19.6 t-m

86 grams

121

6.2mm

552.0 cm2

11.2mm

26-31 liters/ 0.9-1.1 cu.ft.

36-79 liters/ 1.3-2.8 cu.ft.


12.38”, 314.3mm

11.06”, 281mm

fitted as standard

fitted as standard

0.28”, 7.1mm

11.59”, 294.3mm

5.32”, 135mm

22.5 lbs., 10.2 kg

29 lbs., 13.1 kg

copper voice coil

Polyimide former

ferrite magnet

undercut with copper shorting ring and

core Periphery ventilation


Paper cone

cloth cone edge

Pop-on dust cap

definimax™ 4012hodelta Pro-8a KaPPa Pro-10a

7WWW.eminence.com * Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.

delta Pro-12a laB12KaPPa Pro-12a

12”, 304.8mm

8 ohms

400W

800W

51hz

52hz-4.5khz

99.2

80 oz.

0.375”, 9.53mm

2.5”, 63.5mm

51hz

5.71

0.84mh

7.56

0.37

0.35


242cc

0.21mm/n

15.3 t-m

48 grams

138

4.6mm

532.4 cm2

13.7mm

28-35 liters/1-1.25 cu.ft.

31-91 liters/1.1-3.2 cu.ft.


12.38”, 314.5mm

11.07”, 281mm

fitted as standard

fitted as standard

0.27”, 6.9mm

11.57”, 293.8mm

6.22”, 158mm

16.3 lbs., 7.4 kg

18 lbs., 8.2 kg

aluminum voice coil

Polyimide former

ferrite magnet



Paper cone

cloth cone edge


12”, 304.8mm

8 ohms

500W

1000W

37hz

57hz-2.8khz

97.1

80 oz.

0.375”, 9.53mm

3”, 76.2mm

37hz

5.46

1.22mh

6.93

0.25

0.24


249cc

0.32mm/n

17.3 t-m

59 grams

148

4.8mm

519.5 cm2

14.8mm

n/a

17-34 liters/0.6-1.2 cu.ft.


12.38”, 314.5mm

11.07”, 281.1mm

fitted as standard

fitted as standard

0.26”, 6.5mm

11.57”, 293.8mm

6.22”, 158mm

16.6 lbs., 7.5 kg

18.4 lbs., 8.4 kg

copper voice coil

Polyimide former

ferrite magnet

vented core


Paper cone

cloth cone edge


12”, 304.8mm

6 ohms

400W

800W

22hz

25hz-125hz

89.2

160 oz.

0.375”, 9.53mm

2.5”, 63.5mm

22hz

4.29

1.48mh

13.32

0.39

0.38


659cc

0.35mm/n

15.0 t-m

146 grams

56

13.0mm

506.7 cm2

22mm

22.7-28.3 liters/ 0.8-1 cu.ft.

45.3-101.9 liters/1.6-3.6 cu.ft.


12.32”, 312.8mm

10.98”, 278.9mm

fitted as standard

fitted as standard

0.26”, 6.6mm

11.77”, 299mm

6.44”, 164mm

22 lbs., 10 kg

23.8 lbs., 10.8 kg

copper voice coil

Polyimide former

double stacked 80 oz. ferrite magnets


12-spoke die-cast aluminum basket

Kevlar-reinforced paper cone

foam cone edge

dual inverted dust caps

delta Pro-12a KaPPa Pro-12a laB12


nominal impedance*

Power rating**

Watts

music Program

resonance


sensitivity***

magnet Weight

gap height

voice coil diameter


dc resistance (re)


mechanical Q (Qms)


total Q (Qts)




Bl Product (Bl)







sealed

vented


overall diameter



rear sealing gasket



depth

net Weight

shipping Weight

coil construction

coil former

magnet composition

core details

Basket materials

cone composition



sPecification




8

Professional series


delta Pro-15a KaPPa Pro-15adefinimax™ 4015lf

15”, 381mm

8 ohms

700W

1400W

42hz

35hz-1.2khz

96

109 oz.

0.375”, 9.53mm

4”, 101.6mm

42hz

5.04

1.49mh

6.73

0.54

0.5


786cc

0.11mm/n

18.4 t-m

139 grams

77

9.0mm

872.9 cm2

15.5mm

48-57 liters/ 1.7-2.0 cu.ft.

82-181 liters/ 2.9-6.4 cu.ft.


15.21”, 386.3mm

14.0”, 355.6mm

fitted as standard

fitted as standard

0.28”, 7.1mm

14.56”, 369.8mm

6.56”, 166.7mm

23.7 lbs., 10.8 kg

26 lbs., 11.8 kg

copper voice coil

Polyimide former

ferrite magnet

undercut with copper shorting ring and

core Periphery ventilation


acrylic Wetlook Paper cone

cloth cone edge

acrylic wetlook paper dust cap

15”, 381mm

8 ohms

400W

800W

42hz

54hz-4.2khz

101.6

80 oz.

0.375”, 9.53mm

2.5”, 63.5mm

42hz

5.71

0.83mh

4.73

0.44

0.40


368cc

0.24mm/n

14.5 t-m

61 grams

95

4.3mm

856.3 cm2

13.7mm

28-42.5 liters/1-1.5 cu.ft.

57-133 liters/2-4.7 cu.ft.

239 cu.in / 3.92 liters

15.32”, 389mm

14.0”, 356mm

fitted as standard

fitted as standard

0.28”, 7.1mm

14.56”, 369.9mm

6.06”, 154mm

16.6 lbs., 7.5 kg

19.1 lbs., 8.7 kg

aluminum voice coil

Polyimide former

ferrite magnet



Paper cone

cloth cone edge


15”, 381mm

8 ohms

500W

1000W

47hz

46hz-4khz

101

80 oz.

0.375”, 9.53mm

3”, 76.2mm

47hz

5.23

1.01mh

8.01

0.40

0.38


274cc

0.16mm/n

16.6 t-m

72 grams

118

3.2mm

856.3 cm2

13.2mm

n/a

54-184 liters/1.9-6.5 cu.ft.


15.32”, 389.1mm

14.0”, 355.6mm

fitted as standard

fitted as standard

0.28”, 7.1mm

14.56”, 369.9mm

6.06”, 154mm

16.9 lbs., 7.7 kg

19.5 lbs., 8.9 kg

aluminum voice coil

Polyimide former

ferrite magnet

vented core


Paper cone

cloth cone edge


definimax™ 4015lf delta Pro-15a KaPPa Pro-15a


laB15KaPPa Pro-15lf-2 Kilomax® Pro 15a

15”, 381mm

8 ohms

600W

1200W

35hz

38hz-1.8khz

97.8

120 oz.

0.375”, 9.53mm

3”, 76.2mm

35hz

6.5

1.40mh

7.3

0.32

.30


507cc

0.20mm/n

21.6 t-m

102 grams

112

6.7mm

856.3cm2

18.0mm

n/a

76.5-164 liters/2.7-5.8 cu.ft.


15.21”, 386.4mm

14.0”, 355.5mm

fitted as standard

fitted as standard

0.28”, 7.1mm

14.56”, 369.9mm

6.57”, 167mm

22.3 lbs., 10.1 kg

24.8lbs., 11.3 kg

copper voice coil

Polyimide former

ferrite magnet



Paper cone

cloth cone edge


15”, 381mm

8 ohms

1250W

2500W

41hz

44hz-800hz

95.5

109 oz.

0.375”, 9.53mm

4”, 101.6mm

41hz

4.97

1.78mh

8.80

0.40

0.39


677cc

0.15mm/n

17.7 t-m

98 grams

103

7.9mm

856.3 cm2

13.5mm

n/a

82-176 liters/2.9-6.2 cu.ft.


15.21”, 386.3mm

14.0”, 355.6mm

fitted as standard

fitted as standard

0.28”, 7.1mm

14.56”, 369.8mm

6.42”, 163mm

24.7 lbs., 11.2 kg

27.1 lbs., 12.3 kg

copper voice coil

Polyimide former

ferrite magnet

extended core with core Periphery ventilation


Paper cone

cloth cone edge

Porous cloth top spider/ heatsink

15”, 381.0mm

6 ohms

600W

1200W

28hz

20hz-125hz

88.5

160 oz.

0.375”, 9.53mm

3.0”, 76.2mm

28hz

4.9

3.23mh

5.36

.37

.35

103.61 liters / 3.7 cu.ft.

968cc

0.11mm/n

26.7 t-m

308 grams

75

11.8mm

823.7 cm2

22mm

35-108 liters/1.2-3.8 cu.ft.

71-290 liters/2.5-10.3 cu.ft.


15.34”, 389.6mm

14.00”, 355.5mm

fitted as standard

n/a

0.26”, 6.6mm

14.70”, 373.5mm

7.75”, 197mm

23.8 lbs., 10.80 kg

26 lbs, 11.8 kg

copper voice coil

al former

double stacked 80 oz. ferrite magnets



Kevlar-reinforced paper cone

foam cone edge

acrylic wetlook solid composition paper dust cap

KaPPa Pro-15lf-2 Kilomax® Pro 15a laB15


nominal impedance*

Power rating**

Watts

music Program

resonance


sensitivity***

magnet Weight

gap height

voice coil diameter


dc resistance (re)


mechanical Q (Qms)


total Q (Qts)




Bl Product (Bl)







sealed

vented


overall diameter



rear sealing gasket



depth

net Weight

shipping Weight

coil construction

coil former

magnet composition

core details

Basket materials

cone composition



sPecification




10

Professional series


delta Pro-18adefinimax™ 4018lfomega Pro-15a

omega Pro-15a15”, 381mm

8 ohms

800W

1600W

33hz

51hz-1.7khz

97.3

109 oz.

0.375”, 9.53mm

4”, 101.6mm

33hz

5.28

1.04mh

5.69

0.33

0.32


411cc

0.25mm/n

17.5 t-m

94 grams

99

4.8mm

856.3 cm2

12.2mm

n/a

57-108 liters/ 2-3.8 cu.ft.


15.21”, 386.4mm

14.0”, 355.6mm

fitted as standard

fitted as standard

0.28”, 7.1mm

14.56”, 369.9mm

6.35”, 161mm

22.7 lbs., 10.3 kg

25.2 lbs., 11.4 kg

copper voice coil

Polyimide former

ferrite magnet



Paper cone

cloth cone edge


18”, 457.2mm

8 ohms

800W

1600W

32hz

36hz-200hz

95

109 oz.

0.375”, 9.53mm

4”, 101.6mm

32hz

6.19

4.78mh

10.38

0.36

0.35


939cc

0.12mm/n

27.0 t-m

211 grams

89

7.9mm

1188.0 cm2

15.9mm

n/a

125-210 liters/ 4.4-7.4 cu.ft.


18”, 457.2mm

16.57”, 420.9mm

fitted as standard

fitted as standard

0.28”, 7.1mm

17.25”, 438.2mm

8.13”, 206.4mm

24 lbs, 10.9 kg

26 lbs, 11.8 kg

copper voice coil

Polyimide former

ferrite magnet

undercut with copper shorting ring

and core Periphery ventilation


acrylic Wetlook Paper cone

cloth cone edge

acrylic wetlook paper dust cap

18’’, 457mm

8 or 4 ohms

500W

1000W

28hz

37hz-250hz

96

67 oz.

0.380’’, 9.53mm

2.5’’, 63.5mm

28hz

5.3

3.43mh

10.38

0.33

0.32

493.2 liters / 17.41cu.ft.

796cc

0.25mm/n

18.9 t-m

128 grams

84

6.7mm

1188.0 cm2

15.0mm

n/a

85-297 liters/3.0-10.5 cu.ft.


18.00’’, 457.2mm

16.57’’, 420.9mm

fitted as standard

fitted as standard

0.28’’, 7.1mm

17.25’’, 438.2mm

8.13’’, 207mm

17.0 lbs, 7.7 kg

20.5 lbs, 9.3 kg

copper voice coil

Polyimide former

ferrite magnet



Paper cone

cloth cone edge


definimax™ 4018lf delta Pro-18a


sigma Pro 18a-2omega Pro-18aKilomax® Pro 18a

18”, 457.2mm

8 ohms

1250W

2500W

32hz

33hz-300hz

95.8

109 oz.

0.375”, 9.53mm

4”, 101.6mm

32hz

5.07

1.59mh

10.15

.49

0.47

331.5 liters / 11.7 cu.ft.

1159cc

0.18mm/n

17.2 t-m

143.17 grams

64.9

10.0mm

1159.0 cm2

19.2mm

104.8-172.7 liters/3.7-6.1cu.ft.

118.9-303 liters/4.2-10.7cu.ft.


18”, 457.2mm

16.56”, 420.6mm

fitted as standard

fitted as standard

0.28”, 7.1mm

17.25”, 438.2mm

8.15”, 207mm

27.4 lbs., 12.4 kg

30.9 lbs., 14 kg

copper voice coil

Kapton

ferrite magnet

extended core with core Periphery

ventilation


treated Paper-Kevlar

cloth cone edge

Porous cloth top spider/ heatsink

18”, 457.2mm

8 or 4 ohms

800W

1600W

25hz

40hz-800hz

97

109 oz.

0.375”, 9.53mm

4”, 101.6mm

25hz

5.20

1.67mh

8.18

0.32

0.31

548.7 liters / 19.4 cu.ft.

556cc

0.29mm/n

18.8 t-m

138 grams

79

4.8mm

1159.0 cm2

16.0mm

n/a

96-198 liters/ 3.4-7 cu.ft.


18”, 457.2mm

16.56”, 420.5mm

fitted as standard

fitted as standard

0.28”, 7.1mm

17.25”, 438.2mm

8.15”, 207mm

25.2 lbs., 11.4 kg

28.9 lbs., 13.1 kg

copper voice coil

Polyimide former

ferrite magnet



Paper cone

cloth cone edge


18”, 457.2mm

8 ohms

650W

1300W

28hz

41hz-2.4khz

99

120 oz.

0.375”, 9.53mm

3”, 76.2mm

28hz

6.29

1.90mh

8.28

0.30

0.29

441.2 liters / 15.6 cu.ft.

695cc

0.24mm/n

22.1 t-m

130 grams

93

6.1mm

1140.0 cm2

18.0mm

n/a

93-212 liters/3.3-7.5 cu.ft.


18”, 457.2mm

16.56”, 420.5mm

fitted as standard

fitted as standard

0.28”, 7.1mm

17.25”, 438.2mm

8.15”, 207mm

24.5 lbs., 11.1 kg

28.1 lbs., 12.8 kg

copper voice coil

Polyimide former

ferrite magnet



Paper cone

cloth cone edge


Kilomax® Pro 18a omega Pro-18a sigma Pro 18a-2

12

neodymium seriesthe basic design of the loudspeaker hasn’t changed much in the past 50 years. on the contrary, many materials incorporated in loudspeaker design have improved dramatically.

Back in the 50s and 60s, Alnico was the most common magnet used in loudspeakers. However, a shortage in materials and increased costs for Alnico during that time precipitated a shift to the widespread use of the ceramic magnets most of us are familiar with today.

Just before the turn of this century, speaker manufacturers started seriously evaluating the potential benefits of using neodymium magnets in loudspeakers. Although neodymium magnets were expensive, they allowed loudspeaker motors to be as little as half the weight of comparable ceramic magnet motors. Prices of neodymium started coming down and interest in lighter weight speakers grew, as did neodymium speaker options. There are 8 unique models available in our Neodymium Professional series. Each was designed with a specific application in mind. From heavy-duty subwoofers, midranges, and transducers in truncated frames for line arrays, there is an Eminence Neodymium Professional model for your application. Each product includes Made in the USA pride, along with a Seven Year Warranty against manufacturer’s defects*. With over 1,200 USA dealers and distributors worldwide, you can easily find them in a store near you.


eminence is the industry leader in neodymium loudspeaker design.

The Eminence LA, deltalite and Kappalite models represent very lightweight, high performance loudspeakers without compromises in power handling, performance or reliability.

13

ref

lex

Bo

x

ho

rn

lo

ad

ing

su

BW

oo

fer

us

ag

e

Wo

ofe

r u

sa

ge

mid

Ba

ss

us

ag

e

mid

ra

ng

e u

sa

ge

clo

sed

Bo

x

comPatiBilityALPHALiTE 6A j j j j j j

ALPHALiTE 6 CBMr j j

LA8 CNMBA j j j j j j

dELTALiTE ii 2510 j j j j j

dELTALiTE ii 2512 j j j j j

KAPPALiTE 3012HO j j j j j j

KAPPALiTE 3012LF j j j j j

dELTALiTE ii 2515 j j j j

KAPPALiTE 3015 j j j j

KAPPALiTE 3015LF j j j j

14

neodymium series


nominal impedance*

Power rating**

Watts

music Program

resonance


sensitivity***

magnet Weight

gap height

voice coil diameter


dc resistance (re)


mechanical Q (Qms)


total Q (Qts)




Bl Product (Bl)







sealed

vented


overall diameter



rear sealing gasket



depth

net Weight

shipping Weight

coil construction

coil former

magnet composition

core details

Basket materials

cone composition



sPecification





deltalite® ii 2510la8-cnmBaalPhalite™ 6a alPhalite™ 6 cBmr

la8-cnmBaalPhalite™ 6 cBmralPhalite™ 6a6.5”, 165.1mm

8 ohms

100W

200W

125.55hz

74hz-5.5khz

94

3.5 oz.

0.25”, 6.35mm

1.5”, 38.1mm

126hz

7.3

.53mh

6.30

0.61

0.56


46 cc

0.21mm/n

8.5 t-m

7.7 grams

204.9

3.5mm

129.9 cm2

4.0mm

2.83-8 liters/.1-8 cu.ft.

3-16 liters/.1-.6 cu.ft.


6.59”, 167.39mm

5.69”, 144.53mm

fitted as standard

fitted as standard

0.23”, 5.8mm

6.06”, 153.9mm

2.40”, 61mm

2.2 lbs, 1.00 kg

2.9 lbs, 1.3 kg

round copper voice coil

Kapton

neodymium magnet


Pressed steel basket

Paper cone

cloth cone edge

treated paper dust cap

6.5”, 165mm

8 ohms

100W

200W

500.52hz

500hz-4.3khz

99.8

4 oz.

0.25”, 6.35mm

1.5”, 38.1mm

501hz

7.4

.49mh

9.09

1.83

1.53


1.40 cc

0.01mm/n

9.8 t-m

7.6 grams

273.2

0.1mm

139.7 cm2

1.6mm

n/a

n/a


6.59”, 167.39mm

5.69”, 144.53mm

fitted as standard

fitted as standard

0.23”, 5.8mm

6.06”, 153.9mm

2.40”, 61mm

2.3 lbs., 1.04 kg

3.0 lbs, 1.3 kg

copper voice coil

Kapton

neodymium magnet

non-vented core


Paper cone

full Paper cone


8’’, 203mm

8 ohms

225W

450W

82hz

82hz-3.2khz

95.5

7 oz.

0.28’’, 6.99mm

2.5’’, 63.5mm

81hz

5.6

0.62mh

4.66

0.40

0.37

10.95 liters /0.39 cu.ft.

100cc

0.16mm/n

13.0 t-m

24 grams

201

4.5mm

222.4 cm2

8mm

7-17 liters/ 0.2-.6 cu.ft.

10-17 liters/0.4-0.6 cu.ft.


8.02’’, 203.7mm

7.36’’, 186.9mm

fitted as standard

fitted as standard

.28’’, 7.11mm

8.60’’, 218mm

3.90’’, 99.06mm

4.77 lbs., 2.2 kg

5.47 lbs., 2.4 kg

edge Wound copper voice coil

Polyimide former

neo magnet

vented core


Paper cone

cloth cone edge



deltalite® ii 2512 KaPPalite™ 3012ho KaPPalite™ 3012lf

deltalite® ii 2510 deltalite®-ii 2512 KaPPalite™ 3012ho KaPPalite™ 3012lf10”, 254mm

8 ohms

250W

500W

53hz

60hz-4khz

97.3

7 oz.

0.275”, 7mm

2.5”, 63.5mm

53hz

5.06

0.40mh

5.76

0.45

0.42


147cc

0.30mm/n

10.6 t-m

31 grams

117

4.2mm

350.1 cm2

8.0mm

12.7-17 liters/0.45-0.6cu.ft.

17-39.6 liters/0.6-1.4cu.ft.


10.25”,260.4mm

9.15”, 232.4mm

fitted as standard

fitted as standard

0.28”, 7.1mm

9.73”, 247.1mm

4.9”, 123.8mm

4.6 lbs., 2.1 kg

5.7 lbs., 2.6 kg

aluminum voice coil

Polyimide former

neodymium magnet

vented core

die-cast aluminum basket/ heatsink

Paper cone

cloth cone edge


12”, 304.8mm

8 ohms

250W

500W

37hz

48hz-4khz

99.9

7 oz.

0.275”, 7mm

2.5”, 63.5mm

37hz

5.04

0.46mh

3.13

0.44

0.39

147 liters / 5.2 cu.ft.

255cc

0.38mm/n

11.3 t-m

49 grams

84

4.9mm

519.5 cm2

8.5mm

23-28 liters/0.8-1cu.ft.

33-85 liters/1.2-3cu.ft.


12.38”, 314.5mm

11.06”, 280.9mm

fitted as standard

fitted as standard

0.28”, 7.1mm

11.62”, 295.1mm

6.06”, 154mm

5.1 lbs., 2.3 kg

6.8 lbs., 3.1 kg

aluminum voice coil

Polyimide former

neodymium magnet

vented core


Paper cone

cloth cone edge


12”, 305mm

8 ohms

400W

800W

52hz

51hz-3.5khz

100.5

11 oz.

0.365”, 9.27mm

3”, 76.2mm

51.5hz

5.5

0.57mh

8.39

0.33

0.32

81.10 liters / 2.86 cu.ft.

330cc

0.20mm/n

15.9 t-m

46.9 grams

157.4

6.2mm

532.4 cm2

12.5mm

28-76 liters/1.0-2.7 cu.ft.

41-110 liters/1.5-3.9 cu.ft.


12.38”, 314.45mm

11.06”, 280.9mm

fitted as standard

fitted as standard

0.28”, 7.1mm

11.62”, 295.2mm

5.63”, 143mm

7.1 lbs, 3.22 kg

8.7 lbs., 3.95 kg

aluminum voice coil

Kapton

neodymium magnet

vented core


treated Paper cone

sealed cloth surround


12”, 305mm

8 ohms

450W

900W

37hz

46hz-2.0khz

95.5

11 oz.

0.365”, 9.27mm

3”, 76.2mm

37.02hz

5.6

0.98mh

6.94

0.34

0.32

106.65 liters / 3.77 cu.ft.

496cc

0.26mm/n

16.7 t-m

72.4 grams

109.7

9.1mm

545.4 cm2

14.5mm

23-59 liters/1.3-3.0 cu.f.t

37-85 liters/1.3-3.0 cu.ft.


12.38”, 314.45mm

11.06”, 280.9mm

fitted as standard

fitted as standard

0.28”, 7.1mm

11.62”, 295.2mm

6.00”, 152.4mm

7.6 lbs, 3.45 kg

9.2 lbs., 4.17 kg

copper voice coil

Kapton

neodymium magnet

vented core


treated Paper cone

sealed cloth edge


16

neodymium series


nominal impedance*

Power rating**

Watts

music Program

resonance


sensitivity***

magnet Weight

gap height

voice coil diameter


dc resistance (re)


mechanical Q (Qms)


total Q (Qts)




Bl Product (Bl)







sealed

vented


overall diameter



rear sealing gasket



depth

net Weight

shipping Weight

coil construction

coil former

magnet composition

core details

Basket materials

cone composition



sPecification





KaPPalite™ 3015 KaPPalite™ 3015lfdeltalite®-ii 2515

KaPPalite™ 3015 KaPPalite™ 3015lfdeltalite®-ii 251515”, 381mm

8 ohms

300W

600W

42hz

54hz-3.7khz

99.2

7 oz.

0.275”, 7mm

2.5”, 63.5mm

42hz

5.29

1.15mh

4.56

0.41

0.38


411cc

0.20mm/n

15.7 t-m

72 grams

103

4.8mm

856.3 cm2

9.0mm

42.5-48 liters/1.5-1.7cu.ft.

51-119 liters/1.8-4.2cu.ft.


15.32”, 389mm

14.0”, 355.6mm

fitted as standard

fitted as standard

0.28”, 7.1mm

14.56”, 369.9mm

6.81”, 173mm

5.7 lbs., 2.6 kg

7.9 lbs., 3.6 kg

aluminum voice coil

Polyimide former

neodymium magnet

vented core


Paper cone

cloth cone edge


15”, 381mm

8 ohms

450W

900W

45hz

40hz-4khz

100.8

11 oz.

0.365”, 9.27mm

3”, 76.2mm

45hz

5.27

0.64mh

6.70

0.36

0.34


505cc

0.15mm/n

18.6 t-m

84 grams

125

5.9mm

856.0 cm2

11mm

n/a

51-144 liters/1.8-5.1cu.ft.


15.32”, 389.1mm

14.0”, 356.4mm

fitted as standard

fitted as standard

0.28”, 7.1mm

14.56”, 369.8mm

6.8”, 173mm

7.9 lbs., 3.6 kg

10.1lbs., 4.6 kg

copper voice coil

Polyimide former

neodymium magnet

vented core


Paper cone

cloth cone edge


15”, 381mm

8 ohms

450W

900W

44hz

40hz-1.5khz

98.4

11 oz.

0.365”, 9.27mm

3”, 76.2mm

44hz

5.5

0.93mh

8.97

.48

.46


846cc

0.14mm/n

17.0 t-m

93.4 grams

90

9.6mm

881.1 cm2

17.0mm

n/a

99-195 liters/3.5-6.9 cu.ft.


15.32”, 389.1mm

14.03”, 356.4mm

fitted as standard

fitted as standard

0.28”, 7.1mm

14.56”, 369.8mm

7.25”, 184.2mm

8.6 lbs., 3.9 kg

10.7 lbs., 4.9 kg

copper voice coil

Kapton

neodymium magnet

vented core

die-cast aluminum basket/heatsink

treated Paper cone

cloth cone edge


LoudspeakersPlus®

450 S. Spruce St. • Unit G • Manteno, IL 609501.866.963.0733

www.loudspeakersplus.comwww.speakerreconingservice.com

www.thetonechamber.com

Our new exclusive Tone Chamber is the only place where you can try EVERY

Eminence guitar speaker– with YOUR guitar and

YOUR amp.

By using our custom designed switching system, you can

instantly compare all27 Eminence guitar speakers.

You can even demo two different speakers at

once for a “blended” tone.

Pick Your Tone!

Call Today to reserve your time in the Tone Chamber!

®sales • service • diagnostics • installation

THE

CHAMBER

TONE

Conveniently located just south of Chicago on I-57.

• With over 75 years of combined experience, our in-house technical staff is available for application specific consulting

• Factory Authorized Genuine Eminence Warranty and Service

• Our 7500 sq. ft. warehouse is centrally located in North America for fast and economical delivery

• Same Day Shipping and Express Shipping Services available

As a Charter Genuine Eminence Distributor our huge inventory

is ready to ship today

®

18

american standardEach Eminence American Standard model can be identified by its economical Stamped Steel chassis. Although more affordable than cast aluminum, these frames provide an excellent and versatile chassis. We coat the basket and all metal parts with an epoxy-acrylic finish. Our in-house e-coat process lets us control the thickness of that coating to within 0.001”. That’s the diameter of a human hair and it’s critical when working with close tolerance transducer motor designs. We then add front and rear sealing gaskets on each model to allow front or rear loading.

There are 24 unique models available in our American Standard series so it’s easy to find yours. Each is designed for versatility in a range of applications. And like our Professional series, every speaker comes standard with Made in the USA pride, and is backed by a Seven Year Warranty against manufacturer’s defects*. There are over 1,200 USA dealers and distributors worldwide. Visit www.eminence.com to find a dealer near you.


the eminence mission statement is “Quality, value, and service to meet our customer’s needs.”

From stage to studio and even the highway, our speakers speak for this mission. Eminence offers 6.5-15” models with applications ranging from standard sub-woofers, two-way enclosures, and coaxials, to truncated line array models, monitor woofers, and high performance midranges setting records for output in car audio. No other loudspeaker line provides more choices, power handling, performance, and reliability for the price.

19

comPatiBilityALPHA 6A j j j j j j

ALPHA 6C j j j j j j

LA6 CBMr j j

ALPHA 8A j j j j j

ALPHA 8MrA j j

BETA 8A j j j j j j

BETA 8Cx j j j j j

ALPHA 10A j j j j j j

BETA 10A j j j j j

BETA 10Cx j j j j j

dELTA 10A j j j j j

dELTA 10B j j j j j

ALPHA 12A j j j j j

BETA 12A j j j j j

BETA 12Cx j j j j j

BETA 12LTA j j j j j

dELTA 12A j j j j

dELTA 12B j j j j

dELTA 12LFA j j j j j j

dELTA 12LFC j j j j j

KAPPA 12A j j j j j

ALPHA 15A j j j j j

BETA 15A j j j j

dELTA 15A j j j j

dELTA 15B j j j j

dELTA 15LFA j j j j

gAMMA 15A j j j j

KAPPA 15A j j j j

KAPPA 15C j j j j

KAPPA 15LFA j j j j

ref

lex

Bo

x

ho

rn

lo

ad

ing

su

BW

oo

fer

us

ag

e

Wo

ofe

r u

sa

ge

mid

Ba

ss

us

ag

e

mid

ra

ng

e u

sa

ge

clo

sed

Bo

x

20


nominal impedance*

Power rating**

Watts

music Program

resonance


sensitivity***

magnet Weight

gap height

voice coil diameter


dc resistance (re)


mechanical Q (Qms)


total Q (Qts)




Bl Product (Bl)







sealed

vented


overall diameter



rear sealing gasket



depth

net Weight

shipping Weight

coil construction

coil former

magnet composition

core details

Basket materials

cone composition



sPecification




american standard series


alPha-6a la6-cBmr alPha-8a

alPha-6a alPha-8ala6-cBmr6.5”, 165mm

8 or 4 ohms

100W

200W

118hz

85hz-6khz

93.6

20 oz.

0.25”, 6.35mm

1.5”, 38.1mm

118hz

7.2

0.19mh

5.68

0.60

0.54


44cc

0.26mm/n

8.0 t-m

7 grams

197

3.5mm

126.7 cm2

4.0mm

2.8-5.7 liters/0.1-0.2 cu.ft.

3.4-15.6 liters/0.12-0.55 cu.ft.


6.59”, 167.4mm

5.69”, 144.5mm

fitted as standard

fitted as standard

0.23”, 5.7mm

6.06”, 154mm

2.8”, 71mm

4.1 lbs., 1.9 kg

4.8 lbs., 2.2 kg

copper voice coil

Polyimide former

ferrite magnet



Paper cone

cloth cone edge


6.5”, 165mm

8 ohms

150W

300W

460hz

500hz-5.4khz

97.8

38 oz.

0.31”, 7.92mm

1.5”, 38.1mm

460hz

6.3

0.33mh

3.13

1.24

0.89


2.7cc

0.01mm/n

11.1 t-m

9 grams

371

0.2mm

133.1 cm2

0.8mm

acceptable

acceptable


6.59”, 167mm/Width across flats: 6”, 152mm

5.65”, 143.5mm

fitted as standard

n/a

0.23”, 5.7mm

6.06”, 154mm

2.77”, 70mm

6.7 lbs., 3 kg

7.2 lbs., 3.3 kg

copper voice coil

Polyimide former

ferrite magnet


Pressed steel basket with truncated sides

Paper cone

cloth cone edge


8”, 203.2mm

8 ohms

125W

250W

73hz

58hz-5khz

94

20 oz.

0.25”, 6.35mm

1.5”, 38.1mm

73hz

5.3

0.44mh

4.6

0.68

0.59


67cc

0.28mm/n

7.8 t-m

17 grams

107

3.2mm

210.0 cm2

7.1mm

5-7 liters/0.18-0.25 cu.ft.

16.7-25.5 liters/0.59-0.90 cu.ft.


8.24”, 209.2mm

7.13”, 181mm

fitted as standard

fitted as standard

0.22”, 5.5mm

7.75”, 196.9mm

3.25”, 83mm

4.3 lbs., 1.9 kg

5.1 lbs., 2.3 kg

copper voice coil

Polyimide former

ferrite magnet

vented core


Paper cone

cloth cone edge



Beta-8a Beta-8cxalPha-8mra alPha-10a

alPha-10aalPha-8mra Beta-8a Beta-8cx8”, 203.2mm

8 ohms

125W

250W

514hz

400hz-4.8khz

100.9

20 oz.

0.25”, 6.35mm

1.5”, 38.1mm

514hz

7.32

0.34mh

4.48

2.08

1.42


0cc

0.01mm/n

8.9 t-m

6.9 grams

247

1.6mm

205.9 cm2

3.0mm

n/a

n/a


8.22”, 208.8mm

7.19”, 182.5mm

fitted as standard

fitted as standard

0.22”, 5.5mm

7.75”, 196.9mm

3.25”, 83mm

4.4 lbs., 2 kg

5.1 lbs., 2.3 kg

copper voice coil

Polyimide former

ferrite magnet

vented core

Pressed steel basket with closed back

Paper cone

Paper cone edge


8”, 203.2mm

8 ohms

225W

450W

65hz

78hz-4.5khz

95.1

34 oz.

0.312”, 7.92mm

2”, 50.8mm

65hz

5.99

0.49mh

4.95

0.42

0.38


63cc

0.37mm/n

9.6 t-m

16 grams

156

3.0mm

210.0 cm2

7.4mm

5.7-9.9 liters/0.2-0.35 cu.ft.

8.5-19 liters/0.3-0.67 cu.ft.


8.24”, 209.2mm

7.13”, 181mm

fitted as standard

fitted as standard

0.22”, 5.5mm

7.75”, 196.9mm

3.5”, 89mm

6.6 lbs., 3 kg

7.4 lbs., 3.4 kg

aluminum voice coil

Polyimide former

ferrite magnet

vented core


Paper cone

cloth cone edge


8”, 203.2mm

8 ohms

250W

500W

63hz

74hz-20khz

93.3

38 oz.

0.313”, 7.94mm

2”, 50.8mm

63hz

5.6

0.85mh

8.82

0.34

0.33


67.20cc

0.32mm/n

11.1 t-m

18.3 grams

193.1

3.2mm

210.0 cm2

6.9mm

3-10 liters/ 0.1-0.4 cu.ft.

8-21 liters/0.3-0.8 cu.ft.


8.24”, 209.3mm

7.13”, 181.1mm

fitted as standard

fitted as standard

0.22”, 5.6mm

7.75”, 196.9mm

3.5”, 88.9mm

6.8 lbs., 3.1 kg

7.5 lbs., 3.4 kg

copper voice coil

Kapton former

ferrite magnet

tapered coax


treated Paper cone

sealed cloth cone edge

Zurette dust cap

10”, 254mm

8 ohms

150W

300W

50hz

57hz-4.5khz

95.6

20 oz.

0.25”, 6.35mm

1.5”, 38.1mm

50hz

5.31

0.66mh

5.21

0.66

0.59


114cc

0.46mm/n

7.5 t-m

22 grams

76

3.2mm

355.4 cm2

9.1mm

8.5-11.3 liters/0.3-0.4 cu.ft.

28.3-53.8 liters/1.0-1.9 cu.ft.


10.11”, 256.8mm

9.13”, 231.8mm

fitted as standard

fitted as standard

0.23”, 5.7mm

9.6”, 243.8mm

3.90”, 99mm

4.5 lbs., 2 kg

5.6 lbs., 2.5 kg

copper voice coil

Polyimide former

ferrite magnet



Paper cone

cloth cone edge


22


nominal impedance*

Power rating**

Watts

music Program

resonance


sensitivity***

magnet Weight

gap height

voice coil diameter


dc resistance (re)


mechanical Q (Qms)


total Q (Qts)




Bl Product (Bl)







sealed

vented


overall diameter



rear sealing gasket



depth

net Weight

shipping Weight

coil construction

coil former

magnet composition

core details

Basket materials

cone composition



sPecification






Beta-10a Beta-10cx delta-10a

Beta-10a Beta-10cx delta-10a10”, 254mm

8 ohms

250W

500W

53hz

51hz-3.8khz

97

34 oz.

0.312”, 7.92mm

2”, 50.8mm

53hz

5.75

0.67mh

8.14

0.52

0.49


102cc

0.36mm/n

9.6 t-m

25 grams

103

3.0mm

344.9 cm2

8.6mm

8.5-14.2 liters/0.3-0.5 cu.ft.

19.8-70.8 liters/0.7-2.5 cu.ft.


10.11”, 256.8mm

9.13”, 231.8mm

fitted as standard

fitted as standard

0.23”, 5.7mm

9.6”, 243.8mm

3.98”, 101mm

6.8 lbs., 3.1 kg

7.8 lbs., 3.6 kg

aluminum voice coil

Polyimide former

ferrite magnet

vented core


Paper cone

cloth cone edge


10”, 254mm

8 ohms

250W

500W

48hz

58hz-20khz*

95.1

38 oz.

0.312”, 7.92mm

2”, 50.8mm

48hz

5.53

0.75mh

5.21

0.43

0.39


173cc

0.39mm/n

10.4 t-m

27 grams

114

5.0mm

344.9 cm2

7.6mm

14.2-19.8 liters/0.5-0.7 cu.ft.

15.6-85 liters/0.55-3 cu.ft.


10.08”, 256.1mm

9.05”, 229.7mm

fitted as standard

fitted as standard

0.25”, 6.4mm

9.66”, 245.4mm

3.98”, 101mm

7.3 lbs., 3.3 kg

8.4 lbs., 3.8 kg

copper voice coil

Polyimide former

ferrite magnet



Paper cone

cloth cone edge

screened cloth dust cap

10”, 254mm

8 or 16 ohms

350W

700W

66hz

63hz-3.7khz

98.8

56 oz.

0.375”, 9.53mm

2.5”, 63.5mm

66hz

5.42

0.74mh

6.53

0.35

0.33


121cc

0.18mm/n

14.4 t-m

32 grams

189

3.5mm

344.9 cm2

9.4mm

n/a

12.7-37.9 liters/0.45-1.34 cu.ft.


10.09”, 256.2mm

9.05”, 229.7mm

fitted as standard

fitted as standard

0.25”, 6.4mm

9.66”, 245.4mm

4.25”, 108mm

10.8 lbs., 4.9 kg

12 lbs., 5.4 kg

aluminum voice coil

Polyimide former

ferrite magnet

vented core


Paper cone

cloth cone edge



Beta-12a-2alPha-12a Beta-12cx Beta-12lta

12”, 304.8mm

8 ohms

250W

500W

47hz

66hz-20khz*

96.4

38 oz.

0.312”, 7.92mm

2”, 50.8mm

47hz

5.57

1.01mh

6.69

0.51

0.48


186cc

0.40mm/n

10.0 t-m

34 grams

84

3.5mm

532.4 cm2

10.4mm

42.5-28 liters/1-1.5 cu.ft.

37-71 liters/1.3-2.5 cu.ft.

122 cu.in / 2 liters

12.03”, 305.5mm

10.95”, 278.1mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.59”, 294.3mm

4.47”, 114mm

7.8 lbs., 3.5 kg

10 lbs., 4.5 kg

copper voice coil

Polyimide former

ferrite magnet

extended core


Paper cone

cloth cone edge

screened cloth dust cap

12”, 304.8mm

8 ohms

225W

450W

45hz

48hz-8khz

97.7

38 oz.

0.312”, 7.92mm

2”, 50.8mm

45hz

7.37

0.83mh

6.44

0.55

0.51


170cc

0.34mm/n

11.7 t-m

36 grams

82

3.2mm

532.4 cm2

8.0mm

14-51 liters/0.5-1.8 cu.ft.

56.6-116 liters/2-4.1 cu.ft.


12.03”, 305.5mm

10.95”, 278.1mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.59”, 294.3mm

4.47”, 114mm

8.1 lbs., 3.7 kg

10.2 lbs., 4.6 kg

copper voice coil

Polyimide former

ferrite magnet

vented core


Paper cone

cloth cone edge


alPha-12a Beta-12a-2 Beta-12cx Beta-12lta12”, 304.8mm

8 ohms

150W

300W

49hz

51hz-4.3khz

95.6

20 oz.

0.25”, 6.35mm

1.5”, 38.1mm

49hz

6.3

0.79mh

6.53

0.88

0.77


125cc

0.32mm/n

8.5 t-m

33 grams

56

2.4mm

519.5 cm2

6.6mm

17-22.7 liters/0.6-0.8 cu.ft.

56.6-113.3 liters/2-4 cu.ft.


12.26”, 311.4mm

11”, 279.5mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.71”, 297.5mm

4.73”, 120mm

5.3 lbs., 2.4 kg

7.4 lbs., 3.4 kg

copper voice coil

Polyimide former

ferrite magnet



Paper cone

cloth cone edge

solid composition felt dust cap

12”, 304.8mm

8 ohms

250W

500W

47hz

43hz-3.8khz

98

38 oz.

0.312”, 7.92mm

2”, 50.8mm

47hz

5.0

0.64mh

6.00

0.50

0.46


237cc

0.29mm/n

10.8 t-m

40 grams

94

4.4mm

538.9 cm2

11mm

25.5-35.4 liters, 0.9-1.25 cu.ft.

36.8-139 liters/1.3-4.9 cu.ft.


12.03”, 305.5mm

10.95”, 278.1mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.59”, 294.3mm

4.57”, 116mm

7.5 lbs., 3.4 kg

9.7 lbs., 4.4 kg

copper voice coil

Polyimide former

ferrite magnet



Paper cone

cloth cone edge


24


nominal impedance*

Power rating**

Watts

music Program

resonance


sensitivity***

magnet Weight

gap height

voice coil diameter


dc resistance (re)


mechanical Q (Qms)


total Q (Qts)




Bl Product (Bl)







sealed

vented


overall diameter



rear sealing gasket



depth

net Weight

shipping Weight

coil construction

coil former

magnet composition

core details

Basket materials

cone composition



sPecification






delta-12a delta-12lfa delta-12lfc

delta-12a delta-12lfa delta-12lfc12”, 304.8mm

8 ohms

500W

1000W

51hz

44hz-3khz

94.6

56 oz.

0.375”, 9.53mm

2.5”, 63.5mm

51hz

6.06

1.45mh

7.28

0.51

0.47


243cc

0.19mm/n

14.1 t-m

51 grams

100

4.8mm

506.7 cm2

13.5mm

19.8-28 liters/0.7-1.0 cu.ft.

25.5-102 liters/0.9-3.6 cu.ft.


12.03”, 305.5mm

10.95”, 278.1mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.59”, 294.3mm

5.35”, 136mm

11.8 lbs., 5.4 kg

14 lbs., 6.4 kg

copper voice coil

Polyimide former

ferrite magnet



Paper cone

cloth cone edge


12”, 304.8mm

8 or 16 ohms

400W

800W

55hz

54hz-5khz

98.3

56 oz.

0.375”, 9.53mm

2.5”, 63.5mm

55hz

6.3

0.74mh

5.27

0.46

0.43


125cc

0.21mm/n

13.5 t-m

39 grams

120

2.4mm

519.5 cm2

9.9mm

n/a

25.5-85 liters/0.9-3 cu.ft.


12.03”, 305.5mm

10.95”, 278.1mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.59”, 294.3mm

5.35”, 136mm

11.4 lbs., 5.2 kg

13.5 lbs., 6.1 kg

aluminum voice coil

Polyimide former

ferrite magnet

vented core


Paper cone

cloth cone edge


12”, 304.8mm

4 ohms

500W

1000W

52hz

45hz-2.3khz

93.1

56 oz.

0.375”, 9.53mm

2.5”, 63.5mm

52hz

3.2

.94mh

8.21

.47

.44


249cc

0.17mm/n

10.9 t-m

53 grams

111.4

4.8mm

519.5 cm2

13.5mm

21-74 liters/0.7-2.6 cu.ft.

28-110 liters/1.0-3.9 cu.ft.


12.03”, 305.5mm

10.95”, 278.1mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.59”, 294.4mm

5.88”, 149.35mm

11.8 lbs., 5.4 kg

14 lbs., 6.4 kg

copper voice coil

Kapton

ferrite magnet



treated Paper cone

cloth cone edge



Beta-15aalPha-15a delta-15aKaPPa-12a

alPha-15a Beta-15a delta-15aKaPPa-12a12”, 304.8mm

8 ohms

450W

900W

45hz

62hz-4.2khz

99.3

80 oz.

0.375”, 9.53mm

3”, 76.2mm

45hz

5.41

0.77mh

7.76

0.28

0.27


166cc

0.30mm/n

15.2 t-m

42 grams

161

3.2mm

519.5 cm2

11.5mm

n/a

34-62 liters/1.2-2.2 cu.ft.


12.26”, 311.4mm

11.0”, 279.5mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.71”, 297.5mm

5.63”, 143mm

14.9 lbs., 6.8 kg

17.9 lbs., 8.2 kg

aluminum voice coil

Polyimide former

ferrite magnet

vented core


Paper cone

cloth cone edge


15”, 381mm

8 ohms

200W

400W

41hz

46hz-3.5khz

97

25 oz.

0.25”, 6.35mm

1.5”, 38.1mm

41hz

5.88

0.84mh

7.23

1.53

1.26


325cc

0.25mm/n

7.7 t-m

59 grams

27

3.8mm

856.3 cm2

8.4mm

71-85 liters/2.5-3 cu.ft.

106-177 liters/3.75-6.25 cu.ft.


15.15”, 384.8mm

13.77”, 349.6mm

fitted as standard

fitted as standard

0.25”, 6.4mm

14.56”, 369.9mm

5.83”, 148mm

6.7 lbs., 3 kg

8.8 lbs., 4 kg

copper voice coil

Polyimide former

ferrite magnet



Paper cone

cloth cone edge


15”, 381mm

8 ohms

300W

600W

35hz

45hz-3.7khz

98.2

34 oz.

0.312”, 7.92mm

2”, 50.8mm

35hz

6.32

1.10mh

8.10

0.63

0.58

334.6 liters / 11.8 cu.ft.

330cc

0.35mm/n

11.5 t-m

60 grams

56

4.0mm

823.7 cm2

11.6mm

45-62 liters/1.6-2.2 cu.ft.

99-175.6 liters/3.5-6.2 cu.ft.


15.15”, 384.8mm

13.77”, 349.6mm

fitted as standard

fitted as standard

0.25”, 6.4mm

14.56”, 369.9mm

6.05”, 154mm

8.8 lbs., 4 kg

10.8 lbs., 4.9 kg

copper voice coil

Polyimide former

ferrite magnet



Paper cone

cloth cone edge


15”, 381mm

8 or 16 ohms

400W

800W

40hz

48hz-4khz

100

56 oz.

0.375”, 9.53mm

2.5”, 63.5mm

40hz

6.3

0.64mh

8.05

0.57

0.53

270.7 liters / 9.56 cu.ft

233cc

0.26mm/n

13.2 t-m

62 grams

70

2.7mm

864.6 cm2

11.1mm

37-42.5 liters/1.3-1.5 cu.ft.

82-161.4 liters/2.9-5.7cu.ft.


15.15”, 384.8mm

13.77”, 349.6mm

fitted as standard

fitted as standard

0.25”, 6.4mm

14.56”, 369.9mm

6.05”, 154mm

12.3 lbs., 5.6 kg

14.4 lbs., 6.5 kg

aluminum voice coil

Polyimide former

ferrite magnet

vented core


Paper cone

cloth cone edge


26


nominal impedance*

Power rating**

Watts

music Program

resonance


sensitivity***

magnet Weight

gap height

voice coil diameter


dc resistance (re)


mechanical Q (Qms)


total Q (Qts)




Bl Product (Bl)







sealed

vented


overall diameter



rear sealing gasket



depth

net Weight

shipping Weight

coil construction

coil former

magnet composition

core details

Basket materials

cone composition



sPecification






KaPPa-15agamma 15a-2

gamma 15a-2 KaPPa-15a

delta-15lfa

delta-15lfa15”, 381mm

8 ohms

500W

1000W

39hz

42hz-3.2khz

96

56 oz.

0.375”, 9.53mm

2.5”, 63.5mm

39hz

6.11

1.37mh

6.3

0.52

0.48

241.0 liters / 8.51 cu.ft.

419cc

0.23mm/n

14.6 t-m

75 grams

75

4.8mm

873.0 cm2

16.5mm

36.8-42.5 liters/1.3-1.5 cu.ft.

85-167 liters/3-5.9 cu.ft.


15.15”, 384.8mm

13.77”, 349.6mm

fitted as standard

fitted as standard

0.25”, 6.4mm

14.56”, 369.9mm

6.3”, 160mm

12.8 lbs., 5.8 kg

14.8 lbs., 6.7 kg

copper voice coil

Polyimide former

ferrite magnet



Paper cone

cloth cone edge


15”, 381mm

8 ohms

300W

600W

33hz

48hz-3.3khz

98.6

59 oz.

0.312”, 7.92mm

2”, 50.8mm

33hz

5.98

1.73mh

5.13

0.32

0.30

314.1 liters / 11.1 cu.ft.

257cc

0.31mm/n

17.2 t-m

78 grams

103

3.0mm

856.3 cm2

11.8mm

n/a

40-136 liters/1.4-4.8 cu.ft.


15.15”, 384.8mm

13.77”, 349.6mm

fitted as standard

fitted as standard

0.25”, 6.4mm

14.56”, 369.9mm

5.94”, 151mm

11.8 lbs., 5.4 kg

14.1 lbs., 6.4 kg

aluminum voice coil

Polyimide former

ferrite magnet

vented core


Paper cone

cloth cone edge


15”, 381mm

8 or 4 ohms

450W

900W

33hz

52hz-2.3khz

100.5

80 oz.

0.375”, 9.53mm

3”, 76.2mm

33hz

5.22

1.05mh

8.90

0.33

0.32

321.3 liters / 11.35 cu.ft.

343cc

0.31mm/n

15.7 t-m

76 grams

98

4.0mm

856.3 cm2

11.6mm

n/a

45-113 liters/1.6-4 cu.ft.


15.16”, 384.9mm

13.77”, 349.6mm

fitted as standard

fitted as standard

0.25”, 6.4mm

14.56”, 369.9mm

6.13”, 156mm

17.6 lbs., 8 kg

19.8 lbs., 9 kg

copper voice coil

Polyimide former

ferrite magnet

vented core


Paper cone

cloth cone edge


The h2ea is a rugged, cast aluminum 2” throat horn, incorporating an exponential flare for optimized acoustic loading and energy transfer. its compact size makes it ideal for sound reproduction in small, medium, and large-size venues. See page 29 for more information.

KaPPa-15lfa

hf Products & comPonents

Whether for use in Eminence loaded cabinets or an upgrade to an existing system, Eminence HF drivers achieve extraordinary levels of audio performance. Add to that the same unrivaled durability you’ve come to expect from Eminence bass and midrange transducers, and you’ve got true professional value.

The Eminence assortment of horns is engineered to provide the perfect compliment to Eminence HF drivers. Each horn is manufactured from the highest quality materials to obtain a balance of strength, durability, and weight savings.

Eminence Professional Series crossovers are technically superior passive filters available in board-only or cabinet-ready configurations. Our high-pass protection circuits center around custom manufactured aerospace lamps, working as positive temperature coefficient series varistors to protect your HF device without introducing distortion. From low-pass and high-pass filters, to two-way and three-way units with multiple crossover point options, and L-PAds for more custom HF level control, there is an Eminence crossover solution to meet your needs.

No loudspeaker system or musical performance is complete without high quality, durable HF devices, well-designed horns, and high-performance crossovers.

Buyeminence.comyour B2B loudsPeaKer suPer store!

KaPPa-15lfa

neW: 2” throat h2ea horn flare

15”, 381mm

8 ohms

600W

1200W

39hz

38hz-2.7khz

99

95 oz.

0.375”, 9.53mm

3”, 76.2mm

39hz

5.4

1.27mh

6.08

0.41

0.38


471cc

0.15mm/n

18.6 t-m

105 grams

95

5.5mm

856.3 cm2

10.4mm

n/a

62-193 liters/2.2-6.8 cu.ft.


15.16”, 384.9mm

13.77”, 349.6mm

fitted as standard

fitted as standard

0.25”, 6.4mm

14.56”, 369.9mm

6.38”, 162mm

20 lbs., 9.1 kg

22.3 lbs., 10.1 kg

copper voice coil

Polyimide former

ferrite magnet

vented core


Paper cone

cloth cone edge


28

throat size

nominal impedance*

Power rating**

resonance


recommended crossover

sensitivity***

magnet Weight

voice coil diameter

diaphragm material

re

throat size

nominal impedance*

Power rating**

resonance


recommended crossover

sensitivity***

magnet Weight

voice coil diameter

voice coil former

diaphragm material

re

overall diameter

depth

Weight

mounting thread

overall diameter

depth

Weight



mounting thread

sPecification

sPecification




drivers

asd:1001 aPt:50

nsd:2005 Psd:2002 Psd:3006

the nsd:2005 and Psd:2002 drivers are available in either screw-on or bolt-on formats. Please sPecify your Preferences when ordering. the Psd:3006 is bolt-on only.

2", 50.8mm

8 ohms

100W

470hz

800hz-20khz

see Power rating

109dB

80 oz

3", 76.2mm

Polyimide

titanium w/geodesic design for increased strength and stiffness

4.8 ohms

3.5", 88.9mm

2.45", 62mm

2 lbs / 0.9 kg

1 3/8" 18 nef ext.

1", 25.4mm

8 ohms

50W @ 2.5khz

1.23khz

2.5khz-20khz

2.5khz/18dB

104.3dB

12 oz, .34 kg

1.3", 33mm

diamond titanium

6.7

2.75", 70mm

2.5", 63.5mm

1.63 lbs /0.74 kg

1 3/8” 18 nef ext. for mounting on

coaxial speakers or screw-on horns.

1", 25.4mm

8 ohms

45W @ 3.5khz, 85Wrms @5khz

1.6khz

3.5hz-20khz

3.5khz

104dB

7.75 oz, .22 kg

1.0"/25.4mm

Phenolic

6.3

3.87", 98.3mm

1.75", 44mm

2 lbs / 0.9 kg

2x 1/4-20

3"

1 3/8" 18 nef ext.

1", 25.4mm

8 or 16 ohms

50W

578hz

1.5khz-20khz

1.5khz/12dB

108.4dB

4.16 oz

2", 51mm

Polyimide

titanium

6.8

5.25", 133mm

2.2", 56mm

5 lbs, gross 5.76 lbs

2x 1/4-20 or 3x m6

3" or 2.25"

1 3/8" 18 nef ext.

1", 25.4mm

8 or 16 ohms

80W

540hz

1.2khz-20khz

1.2khz/18dB or 1.8khz/12dB

106.1dB

34 oz

2", 51mm

Polyimide

titanium

6.1

7.9", 200.7mm

3.1", 78.7mm

13.5 lbs / 6.12 kg

#4 (1/4-20)

4", 101.6mm

n/a

@ 1w/1m across 800hz-20khz on axis on h2ea horn

multiPle units exceeding Published rating evaluated under aes noise source and tested standard while mounted on the h290 horn in a non-temPerature controlled environment.

******

29WWW.eminence.com

dispersion

dimensions

cut-out

depth

Weight


suPertWeeter oPtions

horn flares

type

throat size

dispersion

lowest rec. crossover

Width/height/depth

Width/height/depth (mm)

cut-out

Weight

type

throat size

dispersion

lowest rec. crossover

Width/height/depth

Width/height/depth (mm)

cut-out

Weight

sPecification

sPecification

h290 h290s h295 h395

sst1 lt250 h2ea Bh410

aPt:3 adaPtor B2s adaPtor toP hat-ch

aPt:80 aPt:150 aPt:200

radial

1", 25mm

90 x 40

1khz

11.4" x 6.5" x 5.9"

290 x 165 x 150mm

10.3" x 4.9", 260 x 126mm

1.8 lbs, 818 grams

radial

1", 25mm

90 x 40

1khz

11.7" x 6.6" x 6.6"

297 x 168 x 168mm

9.7" x 4.9", 246 x 124mm

1.1 lbs, 500 grams

constant directivity

1", 25mm

90 x 40

1khz

12.1" x 6" x 4"

307 x 152 x 102mm

10.5" x 4.3", 267 x 109mm

1.3 lbs, 591 grams


1", 25mm

90 x 40

1khz

15.6" x 7.3" x 6.1"

396 x 185 x 155mm

13.9" x 5.9", 355 x 150mm

1.8 lbs, 818 grams


1", 25mm

90 x 40

1khz

9.8" x 7.7" x 5.2"

249 x 196 x 132mm

8.5" x 6.4", 216 x 163mm

1.7 lbs, 773 grams


1", 25mm

60 x 40

1khz

6.7" x 6.4" x 4.2"

170 x 163 x 107mm

5.4" x 5.2", 137 x 132mm

0.8 lbs, 364 grams

exponential

2", 51mm

60 x 40

700hz

12.4" x 7.3" x 6.1"

315 x 185 x 155mm

11.3" x 6.3", 287 x 160mm

4.9 lbs, 2.24 kg

exponential

1", 25mm

60 x 60

1khz

5.59" x 5.59" x 4.38"

141.9 x 141.9 x 111.2mm

3.56" x 3.56", 90.4 x 90.4mm

.35 lbs, 159 grams

apt:3 adaptor converts the aPt:50

to 1 3/8" 18 nef ext. for mounting on

coaxial speakers or screw-on horns.

converts bolt-on driver to

accept a screw-on horn.

2x 1/4-20 or 3x m6 driver

to 1 3/8” 18nef ext. horn.

adjustable-angle speaker stand

receptacle for loudspeaker boxes.

vertical angle can be adjusted in

4º increments to +/- 18º. fits sPs56B

and most other standard speaker

stands. internal Ø 36mm. Black

Polyamide. Patent pending.

80° conical

3.4"x3.4", 87mm x 87mm

3.15", 80mm

2.9", 73.6mm

1.6 lbs, 727 grams

100 x 50

7.5"x4.5", 191mm x 114mm

6.7" x 3.4", 170mm x 86mm

4.5", 114.3mm

2 lbs, 909 grams

90 x 90

5.9"x5.9", 150mm x 150mm

4.25"x4.5", 108mm x 114

5.1", 129.5mm

2.5 lbs, 1136 grams

high-quality materials. crafted to perform and endure.

www.eminence.com MADE IN THE USA

The Tone is in the Details.

type

cabinet ready*

crossover frequency

slope

impedance

Power handling

hf level

mounting cut-out

mounting cut-out (mm)

type

cabinet ready*

crossover frequency

slope

impedance

Power handling

hf level

mounting cut-out

mounting cut-out (mm)

type

cabinet ready*

crossover frequency

slope

impedance

Power handling

sPecification

sPecification

sPecification


Px:250 PxB:250 PxB:500 PxB:1k6 PxB:3k5 PxB:5k0

Px2:1k6 Px2:3k5 Px2:5k0 PxB2:500 PxB2:800 PxB2:1k6

PxB2:3k5PxB2:2k5 cx PxB2:5k0 PxB3:1k6 PxB3:3k5 PxB3:5k0

**Picture at toP of Page shows cabinet-ready Px crossover (left) and board-only Px crossover (right).

crossovers

low-Pass

yes

250hz

12dB/octave

Butterworth

8 ohms

600W

3.875" x 6"

98.4 x 152.4mm

low-Pass

no

250hz

12dB/octave

Butterworth

8 ohms

600W

low-Pass

no

500hz

12dB/octave

Butterworth

8 ohms

600W

high-Pass

no

1.6khz

18dB/octave

Butterworth

8 ohms

400W

high-Pass

no

3.5khz

18dB/octave

Butterworth

8 ohms

400W

high-Pass

no

5khz

18dB/octave

Butterworth

8 ohms

400W

2-way

yes

1.6khz

12dB/octave lP

18dB/octave hP

Butterworth

8 ohms

400W

9dB

3.875" x 6"

98.4 x 152.4mm

2-way

yes

3.5khz

12dB/octave lP

18dB/octave hP

Butterworth

8 ohms

400W

9dB

3.875" x 6"

98.4 x 152.4mm

2-way

yes

5khz

12dB/octave lP

18dB/octave hP

Butterworth

8 ohms

400W

9dB

3.875" x 6"

98.4 x 152.4mm

2-way

no

500hz

12dB/octave lP

18dB/octave hP

Butterworth

8 ohms

400W

2-way

no

800hz

12dB/octave lP

18dB/octave hP

Butterworth

8 ohms

400W

2-way

no

1.6khz

12dB/octave lP

18dB/octave hP

Butterworth

8 ohms

400W

2-way

no

3.5khz

12dB/octave lP

18dB/octave hP

Butterworth

8 ohms

400W

2-way

no

2.5khz

12dB/octave lP

12dB/octave hP

custom

8 ohms

250W

type: l-Pad

cabinet ready: yes

impedance: 8 ohms

Power handling: 100W

2-way

no

5khz

12dB/octave lP

18dB/octave hP

Butterworth

8 ohms

400W

3-way

no

500hz/1.6khz

12dB/octave lP

6dB/octave mP

18dB/octave hP

Butterworth

8 ohms

400W

3-way

no

500hz/3.5khz

12dB/octave lP

6dB/octave mP

18dB/octave hP

Butterworth

8 ohms

400W

3-way

no

500hz/5khz

12dB/octave lP

6dB/octave mP

18dB/octave hP

Butterworth

8 ohms

400W

PX-LPAD

eminence.comProudly presenting the ultimate solution for comparative evaluation of guitar speakers. Log on today to review our guitar speaker

tone guide & sound cliPs.

guitar sPeaKersWhether it’s changing pickups, a new stomp-box or holding your tongue just right, guitarists are always looking for ways to get that tone. Here’s a fact - the most overlooked tool in the tone toolbox is the loudspeaker. Nothing short of changing amplifiers or guitars can make such a difference in your tone. The guitar amp speaker is the last element in the tone chain connecting your sound to the audience. it affects your overall coloration, articulation, low-end, midrange, highs, shape and extension, and ability to cut through any mix. The right speaker can offer you a deep, rich mellow flavor; an articulate, percussive and driving clean sound; or a growling, howling guitar on fire. Along with your rig and your style, your speaker provides a tonal palette that only you can imagine.

Eminence offers you over 30 unique specifications for Acoustic and Electric guitar amps. We have a tone that’s right for you and your rig. A tone that only you can call your own.

Our speakers are made for the working musician. With a seven-year warranty inside the continental United States, the pride of being Made in the USA, and a price that’s as easy to handle as a 12-bar blues line.

it’s never been easier to “Pick your sound.”

The Eminence Tone Center, consisting of a 4x12 cabinet loaded with four uniquely voiced guitar speakers and a foot switch, finally offers the consumer the ability to play through a selection of speakers by plugging in any amplifier of their choice. With full color graphics and product information cards for each model, this retail display makes a consumer’s purchase decision easy.

take control of your tone

with eminence.

www.eminence .com

now available from eminence!the mavericK™ and reignmaKer™ with patent-pending fdm™ technology have put a new twist on guitar tone. Turning the modulator knob gives you complete control over the speaker’s output level, associated distortion, and tonal balance, helping you find that sweet spot of saturated tube tone but at a significantly lower volume.

50 Hz 100 200 500 1K 2K 5K 10K

dBSPL

70

75

80

85

90

95

100

105

110

No Turn 1/4 Turn 1/2 Turn 3/4 Turn Full Turn

a 300° knob turn offers warmer tones and nearly 9 dB of attenuation.

Tweak the knob for a wide range of tones: More attenuation affords a warmer tone while less attenuation restores volume and brightness.

Acoustic

34


nominal impedance*

Power rating**

Watts

music Program

resonance


sensitivity***

magnet Weight

gap height

voice coil diameter


dc resistance (re)


mechanical Q (Qms)


total Q (Qts)




Bl Product (Bl)







sealed

vented


overall diameter



rear sealing gasket



depth

net Weight

shipping Weight

coil construction

coil former

magnet composition

core details

Basket materials

cone composition



sPecification





acoustinator™ nh2008 acoustinator™ n2012acoustinator™ cx2008

8”, 203.2mm

8 ohms

200W

400W

57hz

60hz-3.5khz

90.8

38 oz.

0.312”, 7.92mm

2”, 50.8mm

57hz

5.4

0.62mh

9.8

0.40

0.39


64cc

0.33mm/n

10.7 t-m

24 grams

143

3.0mm

214.1 cm2

6.0mm

11-14 liters/ 0.38-0.48 cu.ft.

11-31 liters/ 0.4-1.1 cu.ft.


8.24”, 209.2mm

7.13”, 181mm

fitted as standard

n/a

0.22”, 5.5mm

7.75”, 196.9mm

3.6”, 92mm

6.7 lbs., 3 kg

7.4 lbs., 3.4 kg

copper voice coil

Polyimide former

ferrite magnet

tapered coax core


Polypropylene cone

rubber cone edge

Zurette dust cap

8”, 203.2mm

8 ohms

150W

300W

47hz

60hz-3.3khz

94.5

4 oz.

0.28”, 7.2mm

2”, 50.8mm

47hz

5.4

0.44mh

6.5

0.29

0.28


76cc

0.50mm/n

11.2 t-m

23 grams

162

3.5mm

218.2 cm2

8.0mm

8-9.3 liters/ 0.28-0.33 cu.ft.

12-25.5 liters/ 0.41-0.9 cu.ft.


8.24”, 209.2mm

7.13”, 181mm

fitted as standard

n/a

0.22”, 5.5mm

7.75”, 196.9mm

3.6”, 92mm

3.2 lbs., 1.5 kg

3.9 lbs., 1.8 kg

copper voice coil

Polyimide former

neodymium magnet

non-vented core


hemp cone ô

santoprene cone edge


12”, 304.8mm

8 ohms

150W

300W

31hz

40hz-3.5khz

94.7

4 oz.

0.28”, 7.2mm

2”, 50.8mm

31hz

7.03

0.59mh

12.92

0.54

0.52


203cc

0.46mm/n

12.1 t-m

57 grams

57

3.9mm

519.5 cm2

8.0mm

28-50 liters/ 1-1.75 cu.ft.

59.5-85 liters/ 2.1-3 cu.ft.


12.26”, 311.4mm

11”, 279.5mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.71”, 297.5mm

5.1”, 130mm

4.3 lbs., 2 kg

6 lbs., 2.7 kg

copper voice coil

Polyimide former

neodymium magnet

non-vented core


Polypropylene cone

santoprene cone edge


acoustinator™ cx2008 acoustinator™ n2012acoustinator™ nh2008

WWW.eminence.com 35* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.

legend 1028K legend 1058 legend gB128legend 1218

legend 1028K legend 1058 legend 1218 legend gB12810”, 254mm

8 ohms

35W

n/a

95hz

100hz-5.5khz

97.4

6 oz.

0.25”, 6.2mm

1”, 25.4mm

95hz

5.8

0.51mh

17.96

1.61

1.47


72cc

0.19mm/n

5.7 t-m

15 grams

59

2.1mm

344.9 cm2

n/a

acceptable

acceptable


10.11”, 256.8mm

9.05”, 229.9mm

fitted as standard

n/a

0.22”, 5.6mm

9.6”, 243.8mm

4.8”, 122mm

2.9 lbs., 1.3 kg

4 lbs., 1.8 kg

copper voice coil

Polyimide former

alnico magnet

non-vented core


Paper cone

Paper cone edge


10”, 254mm

8 or 16 ohms

75W

n/a

97hz

100hz-6khz

98.7

16 oz.

0.25”, 6.35mm

1.5”, 38.1mm

97hz

7.49

0.56mh

17.78

1.21

1.13


0cc

0.16mm/n

8.0 t-m

17 grams

80

0.0mm

344.9 cm2

n/a

acceptable

acceptable


10.11”, 256.8mm

9.13”, 231.8mm

fitted as standard

fitted as standard

0.23”, 5.7mm

9.6”, 243.8mm

4.1”, 104mm

4.4 lbs., 2 kg

5.4 lbs., 2.5 kg

copper voice coil

Polyimide former

ferrite magnet

non-vented core


Paper cone

Paper cone edge


12”, 304.8mm

8 ohms

150W

n/a

100hz

80hz-4.2khz

98.8

38 oz.

0.312”, 7.92mm

2”, 50.8mm

100hz

6.95

0.69mh

15.51

0.95

0.89


41cc

0.09mm/n

11.6 t-m

29 grams

105

0.8mm

506.7 cm2

n/a

n/a

acceptable


12.03”, 305.5mm

10.95”, 278.1mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.59”, 294.3mm

4.5”, 114mm

8.4 lbs., 3.8 kg

10.6 lbs., 4.8 kg

copper voice coil

Polyimide former

ferrite magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap

12”, 304.8mm

8 ohms

50W

n/a

86hz

80hz-5.1khz

101.4

38 oz.

0.312”, 7.92mm

1.75”, 44.5mm

86hz

6.37

0.64mh

19.54

0.67

0.65


41cc

0.12mm/n

12.0 t-m

28 grams

128

0.8mm

506.7 cm2

n/a

acceptable

acceptable


12.03”, 305.5mm

10.95”, 278.1mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.59”, 294.3mm

6.06”, 154mm

8.1 lbs., 3.7 kg

10.1 lbs., 4.6 kg

copper voice coil

Paper former

ferrite magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap

36


nominal impedance*

Power rating**

Watts

music Program

resonance


sensitivity***

magnet Weight

gap height

voice coil diameter


dc resistance (re)


mechanical Q (Qms)


total Q (Qts)




Bl Product (Bl)







sealed

vented


overall diameter



rear sealing gasket



depth

net Weight

shipping Weight

coil construction

coil former

magnet composition

core details

Basket materials

cone composition



sPecification





legend v128 legend 1518legend 1258

legend 1258 legend 1518legend v12812”, 304.8mm

8 ohms

120W

n/a

89hz

80hz-5khz

100.9

38 oz.

0.312”, 7.92mm

1.75”, 44.5mm

89hz

6.37

0.64mh

11.98

0.83

0.77


42cc

0.10mm/n

11.5 t-m

30 grams

107

0.8mm

519.5 cm2

n/a

acceptable

acceptable


12.03”, 305.5mm

10.95”, 278.1mm

fitted as standard

n/a

0.25”, 6.4mm

11.59”, 294.3mm

6.06”, 154mm

8.1 lbs., 3.7 kg

10.1 lbs., 4.6 kg

copper voice coil

Polyimide former

ferrite magnet

non-vented core


Paper cone

Paper cone edge


12”, 304.8mm

8 ohms

75W

n/a

94hz

80hz-4khz

100.1

34 oz.

0.312”, 7.92mm

1.5”, 38.1mm

94hz

7.44

0.70mh

6.15

1.18

0.99


24cc

0.09mm/n

10.9 t-m

32 grams

80

0.5mm

506.7 cm2

n/a

n/a

acceptable


12.03”, 305.5mm

10.95”, 278.1mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.59”, 294.3mm

4.9”, 125mm

7.8 lbs., 3.5 kg

9.9 lbs., 4.5 kg

copper voice coil

Polyimide former

ferrite magnet

non-vented core


Paper cone

Paper cone edge


15”, 381mm

8 ohms

150W

n/a

82hz

60hz-4khz

102.2

59 oz.

0.312”, 7.92mm

2”, 50.8mm

82hz

7.16

0.86mh

10.12

1.02

0.93


66cc

0.07mm/n

14.1 t-m

55 grams

80

0.8mm

823.7 cm2

n/a

n/a

acceptable


15.15”, 384.8mm

13.77”, 349.6mm

fitted as standard

n/a

0.25”, 6.4mm

14.56”, 369.9mm

6.1”, 155mm

12.1 lbs., 5.5 kg

14.1 lbs., 6.4 kg

copper voice coil

Polyimide former

ferrite magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap

WWW.eminence.com

ragin caJun™

ragin caJun™10”, 254mm

8 ohms

75W

n/a

84hz

70hz-5khz

100

30 oz.

0.312”, 7.92mm

1.5”, 38.1mm

84hz

7.3

0.39mh

10.8

0.68

0.64


18cc

0.18mm/n

11.5 t-m

20 grams

156

0.5mm

366.1 cm2

n/a

acceptable

acceptable


10.11”, 256.8mm

9.13”, 231.8mm

fitted as standard

fitted as standard

0.23”, 5.7mm

9.6”, 243.8mm

4.3”, 109mm

6.4 lbs., 2.9 kg

8.2 lbs., 3.7 kg

copper voice coil

Polyimide former

ferrite magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap

37* Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.

the coPPerhead™ lil’ Buddy™delta demon™

the coPPerhead™10”, 254mm

8 ohms

75W

n/a

105hz

70hz-5khz

99

20 oz.

0.312”, 7.92mm

1.5”, 38.1mm

105hz

7.59

0.37mh

13.27

1.05

0.98


0cc

0.14mm/n

8.8 t-m

16 grams

100

0.0mm

366.1 cm2

n/a

acceptable

acceptable


10.11”, 256.8mm

9.13”, 231.8mm

fitted as standard

fitted as standard

0.23”, 5.7mm

9.6”, 243.8mm

4.2”, 107mm

4.5 lbs., 2 kg

6.4 lbs., 2.9 kg

copper voice coil

Polyimide former

ferrite magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap

delta demon™10”, 254mm

8 ohms

100W

n/a

76hz

80hz-3khz

96.9

30 oz.

0.312”, 7.92mm

2”, 50.8mm

76hz

6.9

0.66mh

15.06

0.53

0.51


88cc

0.22mm/n

11.3 t-m

21 grams

143

2.4mm

366.1 cm2

n/a

acceptable

n/a


10.09”, 256.2mm

9.05”, 229.7mm

fitted as standard

fitted as standard

0.25”, 6.4mm

9.66”, 245.4mm

3.8”, 97mm

6.8 lbs., 3.1 kg

8.5 lbs., 3.9 kg

copper voice coil

Polyimide former

ferrite magnet

vented core


Paper cone

Paper cone edge


lil’ Buddy™10”, 254mm

8 ohms

50W

n/a

149hz

80hz-5khz

99.1

30 oz.

0.312”, 7.92mm

1.75”, 44.5mm

149hz

6.31

0.46mh

9.06

0.93

0.84


29cc

0.05mm/n

11.7 t-m

22 grams

160

0.8mm

366.1 cm2

n/a

n/a

acceptable


10.11”, 256.8mm

9.13”, 231.8mm

fitted as standard

fitted as standard

0.23”, 5.7mm

9.6”, 243.8mm

4.3”, 109mm

6.3 lbs., 2.9 kg

7.4 lbs., 3.4 kg

copper voice coil

Paper former

ferrite magnet

non-vented core


hemp cone ™

Paper cone edge

Zurette dust cap


nominal impedance*

Power rating**

Watts

music Program

resonance


sensitivity***

magnet Weight

gap height

voice coil diameter


dc resistance (re)


mechanical Q (Qms)


total Q (Qts)




Bl Product (Bl)







sealed

vented


overall diameter



rear sealing gasket



depth

net Weight

shipping Weight

coil construction

coil former

magnet composition

core details

Basket materials

cone composition



sPecification




38 * Please see footnotes on Page 3 for information regarding nominal imPedance, Power rating and sensitivity.

canis maJor™BlacK PoWder™BlacK mountain™

BlacK mountain™ BlacK PoWder™ canis maJor™12”, 304.8mm

8 ohms

30W

n/a

69hz

70hz-5.5khz

101.3

35 oz.

0.312”, 7.94mm

1.75”, 44.45mm

68.58hz

6.44

.62 mh

8.13

0.53

0.50

69.64 liters / 2.46 cu.ft.

40cc

0.19 mm/n

12.07 t-m

27.8 grams

129.2

0.8mm

506.7 cm2

n/a

acceptable

n/a


12.26”, 311.4mm

11.06”, 280.9mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.71”, 297.4mm

5.95”, 151.1mm

8.9 lbs, 4.04 kg

11.1 lbs, 5 kg

copper voice coil

Paper former

alnico magnet

non-vented core


seamed Paper cone

Paper cone edge


12”, 304.8mm

8 ohms

75W

n/a

72hz

70hz-5khz

100

30 oz.

0.312”, 7.92mm

1.5”, 38.1mm

72hz

7.1

0.37mh

14.98

0.75

0.72


25cc

0.22mm/n

9.9 t-m

23 grams

96

0.5mm

519.5 cm2

n/a

n/a

acceptable


12.23”, 310.5mm

11.02”, 279.8mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.67”, 296.4mm

4.6”, 117mm

7 lbs., 3.2 kg

9 lbs., 4.1 kg

copper voice coil

Polyimide former

ferrite magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap

12”, 305mm

8 ohms

50W

n/a

105hz

70hz-4khz

102

35 oz.

0.312”, 7.92mm

1.75”, 44.5mm

104.86hz

6.45

0.61mh

10.16

0.71

0.66


42cc

0.09mm/n

12.6 t-m

26.6 grams

147.6

0.8mm

532.4 cm2

n/a

acceptable

acceptable


12.02”, 305.3mm

10.97”, 278.6mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.63”, 295.4mm

6.2”. 157.5mm

9.3 lbs., 4.2 kg

10.2 lbs., 4.63 kg

copper voice coil

Paper former

alnico magnet

non-vented core


hemp cone ™

Paper cone edge

Zurette dust cap

WWW.eminence.com

lil’ texas™

lil’ texas™12”, 304.8mm

8 or 16 ohms

125W

n/a

90hz

70hz-5.5khz

101

4 oz.

0.28”, 7.2mm

2”, 50.8mm

90hz

7.2

0.42mh

11.29

0.69

0.65


66cc

0.11mm/n

12.8 t-m

28 grams

130

1.3mm

519.5 cm2

n/a

acceptable

acceptable


12.03”, 305.5mm

10.95”, 278.1mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.59”, 294.3mm

5.07”, 129mm

4.1 lbs., 1.9 kg

5.8 lbs., 2.6 kg

copper voice coil

Polyimide former

neodymium magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap


cannaBis rex™ commonWealth™ 12

cannaBis rex™12”, 304.8mm

8 or 16 ohms

50W

n/a

96hz

70hz-5khz

102

38 oz.

0.312”, 7.92mm

1.75”, 44.5mm

96hz

6.56

0.44mh

9.28

0.69

0.64


45cc

0.11mm/n

11.8 t-m

24 grams

139

0.8mm

558.6 cm2

n/a

acceptable

acceptable


12.02”, 305.3mm

10.97”, 278.6mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.63”, 295.4mm

5.1”, 130mm

8.2 lbs., 3.7 kg

9.8 lbs., 4.5 kg

copper voice coil

Paper former

ferrite magnet

non-vented core


hemp cone ™

Paper cone edge

Zurette dust cap

commonWealth™ 1212”, 304.8mm

8 ohms

225W

n/a

50hz

50hz-4khz

100

109 oz.

0.29”, 7.2mm

4”, 101.6mm

50hz

6.34

0.46mh

6.61

0.35

0.33


36cc

0.24mm/n

15.7 t-m

43 grams

143

0.7mm

519.5 cm2

n/a

acceptable

acceptable


12.28”, 312.0mm

11.08”, 281.3mm

fitted as standard

n/a

0.27”, 6.8mm

11.69”, 297.0mm

5”, 127mm

21.5 lbs., 9.8 kg

23.2 lbs., 10.5 kg

aluminum voice coil

Polyimide former

ferrite magnet

vented core


Paper cone

cloth cone edge

aluminum dust cap


nominal impedance*

Power rating**

Watts

music Program

resonance


sensitivity***

magnet Weight

gap height

voice coil diameter


dc resistance (re)


mechanical Q (Qms)


total Q (Qts)




Bl Product (Bl)







sealed

vented


overall diameter



rear sealing gasket



depth

net Weight

shipping Weight

coil construction

coil former

magnet composition

core details

Basket materials

cone composition



sPecification





red White and Blues™mavericK™ screamin eagle™

red White and Blues™ screamin eagle™mavericK™12”, 304.8mm

8 ohms

75W

n/a

82.45 hz

75 hz - 5.2 khz

max attenuation: 91.5 dB full output: 100 dB

38 oz

7.92 mm

1.75”, 44.5 mm

n/a

acceptable

134.25 cu.in., 2.2 liters

12.03”, 305.5 mm

10.95”, 278.1 mm

yes

yes

0.25”, 6.4 mm

11.59”, 294.3 mm

6.562”, 166.6 mm

7.8 lbs., 3.54 kg

9.7 lbs., 4.39 kg

max attenuation

82.6 hz

5.96

0.38 mh

16.26

6.16

4.47

48.71 liters

24.42 cc

0.13 mm/n

3.76 t-m

28.2 grams

13.4

.047 mm

519.5 cm2

n/a

full outPut

82.45 hz

5.99

0.48 mh

16.77

1.17

1.09

48.71 liters

24.42 cc

0.13 mm/n

8.71 t-m

28.5 grams

70.73

0.47 mm

519.5 cm2

n/a

copper voice coil

Polyimide former

ferrite magnet

fdm™ technology


full molded paper cone

Paper cone edge

Zurette dust cap

12”, 304.8mm

8 ohms

120W

n/a

110hz

70hz-4.5khz

101

38 oz.

0.312”, 7.92mm

1.75”, 44.5mm

110hz

6.42

0.43mh

7.19

0.89

0.79


45cc

0.07mm/n

12.3 t-m

30 grams

124

0.8mm

558.6 cm2

n/a

acceptable

acceptable


12.02”, 305.3mm

10.97”, 278.6mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.63”, 295.4mm

5.1”, 130mm

8.2 lbs., 3.7 kg

10.1 lbs., 4.6 kg

copper voice coil

Polyimide former

ferrite magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap

12”, 304.8mm

8 or 16 ohms

50W

n/a

79hz

65hz-5.5khz

101

38 oz.

0.312”, 7.92mm

1.75”, 44.5mm

79hz

6.84

0.48mh

15.95

0.60

0.58


64cc

0.13mm/n

13.1 t-m

30 grams

132

1.2mm

519.5 cm2

n/a

acceptable

acceptable


12.02”, 305.3mm

10.97”, 278.6mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.63”, 295.4mm

5.1”, 130mm

8.3 lbs., 3.8 kg

10 lbs., 4.5 kg

copper voice coil

Paper former

ferrite magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap


sWamP thang™ commonWealth™ 15texas heat™

commonWealth™ 15sWamP thang™ texas heat™12”, 304.8mm

8 or 16 ohms

150W

n/a

97hz

70hz-5khz

102

59 oz.

0.312”, 7.92mm

2”, 50.8mm

97hz

6.92

0.42mh

14.43

0.55

0.53


43cc

0.10mm/n

14.2 t-m

26 grams

177

0.8mm

532.4 cm2

n/a

acceptable

acceptable


12.01”, 305.1mm

10.95”, 278.1mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.63”, 295.4mm

5.2”, 132mm

11.1 lbs., 5 kg

12.8 lbs., 5.8 kg

copper voice coil

Polyimide former

ferrite magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap

12”, 304.8mm

8, 4 or 16 ohms

150W

n/a

79hz

70hz-5khz

99

38 oz.

0.312”, 7.92mm

2”, 50.8mm

79hz

7.3

0.54mh

13.88

0.68

0.65


42cc

0.13mm/n

12.8 t-m

31 grams

116

0.8mm

519.5 cm2

n/a

acceptable

acceptable


12.02”, 305.3mm

10.97”, 278.6mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.63”, 295.4mm

5.1”, 130mm

8.3 lbs., 3.8 kg

10 lbs., 4.5 kg

copper voice coil

Polyimide former

ferrite magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap

15”, 381mm

4 ohms

225W

n/a

52hz

50hz-4khz

100.8

109 oz.

0.29”, 7.2mm

4”, 101.6mm

52hz

3.72

0.22mh

6.75

0.57

0.53


29cc

0.15mm/n

11.8 t-m

65 grams

91

0.3mm

889.6 cm2

n/a

acceptable

acceptable


15.28”, 388.0mm

14.06”, 357.0mm

fitted as standard

n/a

0.26”, 6.5mm

14.57”, 370.0mm

6”, 152mm

22.6 lbs., 10.3 kg

24.8 lbs., 11.3 kg

aluminum voice coil

Polyimide former

ferrite magnet

vented core


Paper cone

cloth cone edge

aluminum dust cap


nominal impedance*

Power rating**

Watts

music Program

resonance


sensitivity***

magnet Weight

gap height

voice coil diameter


dc resistance (re)


mechanical Q (Qms)


total Q (Qts)




Bl Product (Bl)







sealed

vented


overall diameter



rear sealing gasket



depth

net Weight

shipping Weight

coil construction

coil former

magnet composition

core details

Basket materials

cone composition



sPecification





red fang™ 10ramrod™ the governor™

ramrod™ red fang™ 10 the governor™10”, 254mm

8 ohms

75W

n/a

101hz

80hz-5khz

100

30 oz.

0.312”, 7.92mm

1.5”, 38.1mm

101hz

7.3

0.39mh

10.80

0.68

0.64


18cc

0.13mm/n

11.5 t-m

19 grams

149

0.5mm

366.1 cm2

n/a

acceptable

acceptable


10.11”, 256.8mm

9.13”, 231.8mm

fitted as standard

fitted as standard

0.23”, 5.7mm

9.6”, 243.8mm

4.3”, 109mm

5.4 lbs., 2.5 kg

8.3 lbs., 3.8 kg

copper voice coil

Polyimide former

ferrite magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap

10’’, 254mm

8 ohms

50W

n/a

111hz

70hz-4.5khz

102

35 oz.

0.312’’, 7.92mm

1.75’’, 44.5mm

111hz

5.8

0.55mh

12.64

0.50

0.48

21.3 liters/.75 cu.ft.

17cc

0.11mm/n

12.1 t-m

18 grams

223

0.47mm

366.1 cm2

n/a

acceptable

acceptable


10.11’’, 256.8mm

9.13’’, 231.9mm

fitted as standard

fitted as standard

0.23’’, 5.8mm

9.6’’, 243.8mm

5.2’’, 132mm

7.7 lbs., 3.5 kg

8.5 lbs., 3.9 kg

copper voice coil

nomex former

alnico magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap

12”, 304.8mm

8 or 16 ohms

75W

n/a

101hz

70hz-5khz

102

56 oz.

0.312”, 7.92mm

1.75”, 44.5mm

101hz

6.81

0.41mh

11.41

0.59

0.56


64cc

0.08mm/n

15.3 t-m

32 grams

171

1.2mm

519.5 cm2

n/a

acceptable

acceptable


12.02”, 305.3mm

10.97”, 278.6mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.63”, 295.4mm

5.2”, 132mm

10.8 lbs., 4.9 kg

12.6 lbs., 5.7 kg

copper voice coil

nomex former

ferrite magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap


Private JacK™ reignmaKer™man o War™

man o War™ Private JacK™ reignmaKer™12”, 304.8mm

8 ohms

75W

n/a

91.0 hz

80 hz - 6.2 khz

max attenuation: 91.5 dB full output: 100 dB

38 oz

7.92 mm

1.75”, 44.5 mm

n/a

acceptable

134.25 cu.in., 2.2 liters

12.03”, 305.5 mm

10.95”, 278.1 mm

yes

yes

0.25”, 6.4 mm

11.59”, 294.3 mm

6.562”, 166.6 mm

7.8 lbs., 3.54 kg

9.7 lbs., 4.39 kg

full outPut

91.00 hz

5.98

0.50 mh

20.19

1.37

1.29

37.47 liters

24.42 cc

0.10 mm/n

8.74 t-m

30.65 grams

66.31

0.47 mm

519.5 cm2

n/a

copper voice coil

Polyimide former

ferrite magnet

fdm™ technology


full molded paper cone

Paper cone edge

Zurette dust cap

max attenuation

91.25 hz

5.94

0.44 mh

16.82

7.84

5.35

37.47 liters

24.42 cc

0.10 mm/n

3.62 t-m

30.15 grams

11.65

0.47 mm

519.5 cm2

n/a

12”, 304.8mm

8 or 16 ohms

120W

n/a

91hz

70hz-5.5khz

102

38 oz.

0.312”, 7.92mm

1.75”, 44.5mm

91hz

6.2

0.43mh

11.66

0.72

0.68


42cc

0.10mm/n

12.3 t-m

31 grams

127

0.8mm

519.5 cm2

n/a

acceptable

acceptable


12.02”, 305.3mm

10.97”, 278.6mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.63”, 295.4mm

5.2”, 132mm

8.1 lbs., 3.7 kg

9.9 lbs., 4.5 kg

copper voice coil

Polyimide former

ferrite magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap

12”, 304.8mm

8 or 16 ohms

50W

n/a

96hz

70hz-5khz

101

38 oz.

0.312”, 7.92mm

1.75”, 44.5mm

96hz

7.01

0.49mh

18.19

0.72

0.69


64cc

0.09mm/n

13.5 t-m

31 grams

134

1.2mm

519.5 cm2

n/a

acceptable

acceptable


12.02”, 305.3mm

10.97”, 278.6mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.63”, 295.4mm

5.1”, 130mm

8 lbs., 3.6 kg

9.8 lbs., 4.5 kg

copper voice coil

Paper former

ferrite magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap


nominal impedance*

Power rating**

Watts

music Program

resonance


sensitivity***

magnet Weight

gap height

voice coil diameter


dc resistance (re)


mechanical Q (Qms)


total Q (Qts)




Bl Product (Bl)







sealed

vented


overall diameter



rear sealing gasket



depth

net Weight

shipping Weight

coil construction

coil former

magnet composition

core details

Basket materials

cone composition



sPecification





the tonKer™the tonesPotter™red fang™

red fang™ the tonesPotter™ the tonKer™12”, 304.8mm

8 or 16 ohms

50W

n/a

97hz

70hz-5.5khz

103

35 oz.

0.312”, 7.92mm

1.75”, 44.5mm

97hz

5.72

0.39mh

13.39

0.74

0.70


25cc

0.10mm/n

11.1 t-m

26 grams

131

0.5mm

519.5 cm2

n/a

acceptable

acceptable


12.02”, 305.3mm

10.97”, 278.6mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.63”, 295.4mm

6.2”, 158mm

9.3 lbs., 4.2 kg

11.1 lbs., 5 kg

copper voice coil

nomex former

alnico magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap

12”, 304.8mm

8 ohms

75W

n/a

88hz

70hz-5.5khz

100.7

38 oz.

0.312”, 7.92mm

1.75”, 44.5mm

88hz

6.76

0.47mh

10.04

0.73

0.68


64cc

0.10mm/n

12.7 t-m

32 grams

120

1.2mm

519.5 cm2

n/a

acceptable

acceptable


12.02”, 305.3mm

10.97”, 278.6mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.63”, 295.4mm

5.1”, 130mm

8 lbs., 3.6 kg

9.8 lbs., 4.5 kg

copper voice coil

Paper former

ferrite magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap

12”, 304.8mm

8 or 16 ohms

150W

n/a

89hz

70hz-5.5khz

102

59 oz.

0.312”, 7.92mm

2”, 50.8mm

89hz

7.36

0.47mh

10.02

0.49

0.47


42cc

0.09mm/n

17.4 t-m

36 grams

181

0.8mm

519.5 cm2

n/a

acceptable

acceptable


12.02”, 305.3mm

10.97”, 278.6mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.63”, 295.4mm

5.2”, 132mm

11.1 lbs., 5 kg

13.2 lbs., 6 kg

copper voice coil

Polyimide former

ferrite magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap


the WiZard™ tonKerlite™ Big Ben

Big Benthe WiZard™ tonKerlite™12”, 304.8mm

8 or 16 ohms

75W

n/a

89hz

70hz-5.5khz

103

56 oz.

0.312”, 7.92mm

1.75”, 44.5mm

89hz

6.13

0.38mh

11.48

0.49

0.47


42cc

0.11mm/n

14.4 t-m

30 grams

181

0.8mm

519.5 cm2

n/a

acceptable

n/a


12.02”, 305.3mm

10.97”, 278.6mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.63”, 295.4mm

5.2”, 132mm

10.8 lbs., 4.9 kg

12.5 lbs., 5.7 kg

copper voice coil

nomex former

ferrite magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap

12”, 304.8mm

8 or 16 ohms

125W

n/a

109hz

70hz-5.5khz

101

4 oz.

0.28”, 7.2mm

2”, 50.8mm

109hz

7.2

0.42mh

12.58

0.85

0.8


61cc

0.07mm/n

13.1 t-m

30 grams

129

1.2mm

519.5 cm2

n/a

acceptable

acceptable


12.02”, 305.3mm

10.97”, 278.6mm

fitted as standard

fitted as standard

0.25”, 6.4mm

11.63”, 295.4mm

5.1”, 129mm

4.1 lbs., 1.9 kg

5.8 lbs., 2.6 kg

copper voice coil

Polyimide former

neodymium magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap

15”, 381mm

8 ohms

225W

n/a

85hz

70hz-3.5khz

101.5

56 oz.

0.375”, 9.53mm

2.5”, 63.5mm

85hz

6.06

0.51mh

10.63

1.04

0.94


0cc

0.08mm/n

12.1 t-m

47 grams

82

0.0mm

856.3 cm2

n/a

n/a

acceptable


15.13”, 384.2mm

13.8”, 350.5mm

fitted as standard

fitted as standard

0.25”, 6.4mm

14.56”, 369.9mm

6.1”, 155mm

12.6 lbs., 5.7 kg

14.9 lbs., 6.8 kg

copper voice coil

Polyimide former

ferrite magnet

non-vented core


Paper cone

Paper cone edge

Zurette dust cap

look inside most any professional or name brand bass amplifier or enclosure and you’re going to find custom designed, eminence bass guitar speakers. No other speaker manufacturer has a better understanding of bass guitar enclosures and the physics of the woofers required to hold your back line together.

Whether you’re packing a 20lb. practice amp or a 150lb. 8x10 seismic generator, you’ve chosen your rig to cut through the mix with your signature sound.

Maybe you want fast, tight, and articulate, or perhaps you need a fat, round, and warm tone. Maybe you need a speaker that gives you the best of both worlds. You might be playing the CMA awards, have 4 roadies and care less how much your gear weighs, or perhaps your humping yourself to a club in Manhattan via public transportation and can’t carry another pound. No matter your circumstances, there’s no reason to compromise on your tone!

Bass guitar

Pa & musician sPeaKer comPonents

a Premier eminence stocKing distriButor

tel: 1-877-732-5374 | WWW.ussPeaKer.com

The world’s best bass gear manufacturers can’t be wrong, and neither should you. Whether you need to replace a single speaker or want to completely re-vamp your entire rig, let the bass experts at Eminence give you a hand. We’re here to help! 502.845.5622 or [email protected].

With a seven-year warranty inside the continental United States, Made in the USA, and offered at prices for the working musician, it’s never been easier to put your rig on the richter scale.

WWW.eminence.com


nominal impedance*

Power rating**

Watts

music Program

resonance


sensitivity***

magnet Weight

gap height

voice coil diameter


dc resistance (re)


mechanical Q (Qms)


total Q (Qts)




Bl Product (Bl)







sealed

vented


overall diameter



rear sealing gasket



depth

net Weight

shipping Weight

coil construction

coil former

magnet composition

core details

Basket materials

cone composition



sPecification





Basslite® ca2010 Basslite® ch2010 Basslite® s2010

Basslite® ca2010 Basslite® ch2010 Basslite® s201010”, 254mm

8 ohms

150W

300W

51hz

48hz-7khz

93.5

4 oz.

0.28”, 7.2mm

2”, 50.8mm

51hz

5.46

0.55mh

17.5

0.52

0.51


126cc

0.27mm/n

11.2 t-m

37 grams

98

3.5mm

360.7 cm2

7.0mm

17-23 liters/ 0.6-0.8 cu.ft.

23-54 liters/ 0.8-1.9 cu.ft.


10.25”, 260.4mm

9.13”, 231.9mm

fitted as standard

fitted as standard

0.28”, 7.0mm

9.73”, 247.1mm

4.75”, 121mm

3.6 lbs.,1.6 kg

4.7 lbs., 2.1 kg

copper voice coil

Polyimide former

neodymium magnet

non-vented core


aluminum alloy cone

cloth cone edge


10”, 254mm

8 ohms

150W

300W

58hz

54hz-3khz

96.7

4 oz.

0.28”, 7.2mm

2”, 50.8mm

58hz

5.37

0.52mh

6.5

0.47

0.44


120cc

0.26mm/n

11.1 t-m

30 grams

123

3.5mm

344.9 cm2

7.5mm

n/a

17-51 liters/ 0.6-1.8 cu.ft.


10.25”, 260.4mm

9.13”, 231.9mm

fitted as standard

fitted as standard

0.28”, 7.0mm

9.73”, 247.1mm

4.75”, 121mm

3.6 lbs.,1.6 kg

4.7 lbs., 2.1 kg

copper voice coil

Polyimide former

neodymium magnet

non-vented core


hemp cone ô

cloth cone edge

Zurette dust cap

10”, 254mm

8 ohms

150W

300W

46hz

54hz-4khz

96.2

4 oz.

0.28”, 7.2mm

2”, 50.8mm

46hz

5.02

0.47mh

4.16

0.34

0.31


140cc

0.36mm/n

11.9 t-m

33 grams

135

4.0mm

350.1 cm2

8.0mm

n/a

20-51 liters/ 0.7-1.8 cu.ft.


10.08”, 256mm

9.05”, 229.9mm

fitted as standard

n/a

0.25”, 6.4mm

9.66”, 245.4mm

4.25”, 108mm

3.5 lbs., 1.6 kg

4.6 lbs., 2.1 kg

copper voice coil

Polyimide former

neodymium magnet

non-vented core


Paper cone

cloth cone edge


48


nominal impedance*

Power rating**

Watts

music Program

resonance


sensitivity***

magnet Weight

gap height

voice coil diameter


dc resistance (re)


mechanical Q (Qms)


total Q (Qts)




Bl Product (Bl)







sealed

vented


overall diameter



rear sealing gasket



depth

net Weight

shipping Weight

coil construction

coil former

magnet composition

core details

Basket materials

cone composition



sPecification




Bass guitar


legend BP102 legend B810legend B102

10”, 254mm

8 ohms

200W

400W

48hz

44hz-4khz

93

45 oz.

0.312”, 7.92mm

2”, 50.8mm

48hz

6.89

0.67mh

5.31

0.42

0.39


104cc

0.40mm/n

11.8 t-m

28 grams

113

3.0mm

344.9 cm2

8.0mm

n/a

18-85 liters/0.63-3 cu.ft.


10.25”, 260.4mm

9.13”, 231.8mm

fitted as standard

n/a

0.28”, 7.1mm

9.63”, 244.5mm

4.33”, 110mm

9.7 lbs., 4.4 kg

10.9 lbs., 4.9 kg

copper voice coil

Polyimide former

ferrite magnet



Paper cone

cloth cone edge


legend BP102 legend B81010”, 254mm

8 or 4 ohms

200W

400W

35hz

40hz-2khz

92

38 oz.

0.312”, 7.92mm

2”, 50.8mm

35hz

5.59

0.83mh

5.36

0.47

0.43


207cc

0.54mm/n

10.0 t-m

38 grams

75

6.2mm

334.5 cm2

10.0mm

14-28 liters/ 0.5-1 cu.ft.

25.5-62 liters/ 0.9-2.2 cu.ft.


10.08”, 256.1mm

9.05”, 229.7mm

fitted as standard

n/a

0.25”, 6.4mm

9.66”, 245.4mm

4.25”, 108mm

8.9 lbs., 4 kg

9.1 lbs., 4.1 kg

copper voice coil

Polyimide former

ferrite magnet

non-vented core


Paper cone

cloth cone edge

Zurette dust cap

10”, 254mm

32 ohms

150W

300W

52hz

49hz-5.1khz

92.7

30 oz.

0.312”, 7.94mm

2”, 50.8mm

52.07hz

27.5

2.72mh

13.91

0.68

0.65


165.2cc

0.39mm/n

17.7 t-m

23.8 grams

76.8

4.7mm

350.1 cm2

9.5mm

14-35 liters/0.5-1.3 cu.ft.

45-76 liters/1.6-2.7 cu.ft.


10.11”, 256.8mm

9.13”, 231.9mm

fitted as standard

fitted as standard

0.23”, 5.7mm

9.60”, 243.8mm

4.08”, 103.6mm

6.7 lbs, 3.04 kg

7.9 lbs, 3.6 kg

copper voice coil

Kapton

ferrite magnet

non-vented core


Paper cone

cloth cone edge

Zurette dust cap

legend B102


Basslite® s2012 Basslite® c2515 legend ca154

legend cB158

legend cB158

Basslite® c2515 legend ca154Basslite® s201215”, 381mm

4 ohms

300W

600W

51.hz

45hz-3.0khz

96.9

56 oz.

.38”, 9.53mm

2.5”, 63.5mm

51hz

2.9

0.80mh

4.94

0.54

0.49

108.2 liters / 3.82 cu.ft.

412cc

0.11mm/n

12.2 t-m

87 grams

94

5.0mm

823.7 cm2

8.0mm

40-71 liters/1.4-2.5 cu.ft.

45-170 liters/1.6-6.0 cu.ft.


15.15”, 384.81mm

13.87”,352.3mm

fitted as standard

n/a

0.25”, 6.4mm

14.56”, 369.8mm

6.25”, 159mm

11.9 lbs., 5.4 kg

14.1 lbs., 6.4 kg

copper voice coil

Polyimide former

ferrite magnet

vented core


treated Paper cone

sealed cloth surround


12”, 304.8mm

8 ohms

150W

300W

48hz

49hz-4.5khz

97

4 oz.

0.28”, 7.2mm

2”, 50.8mm

48hz

5.1

0.43mh

5.5

0.53

0.48


270cc

0.24mm/n

11.7 t-m

46 grams

91

5.2mm

519.5 cm2

9.8mm

31-35 liters/ 1.1-1.3 cu.ft.

42.5-85 liters/ 1.5-3 cu.ft.


12.03”, 305.5mm

10.95”, 278.1mm

fitted as standard

n/a

0.25”, 6.4mm

11.59”, 294.3mm

5.1”, 130mm

4.1 lbs., 1.9 kg

5.8 lbs., 2.6 kg

copper voice coil

Polyimide former

neodymium magnet

non-vented core


Paper cone

cloth cone edge


15”, 381mm

4 ohms

300W

600W

38hz

52hz-2.5khz

98

7 oz.

0.28”, 7mm

2.5”, 63.5mm

38hz

3.72

0.39mh

4.7

0.50

0.45


381cc

0.26mm/n

11.1 t-m

70 grams

76

4.5mm

856 cm2

8.5mm

45-82 liters/ 1.6-2.9 cu.ft.

85-119 liters/ 3-4.2 cu.ft.


15.32”, 389.1mm

14.0”, 355.6mm

fitted as standard

fitted as standard

0.28”, 7.0mm

14.56”, 369.9mm

6.9”, 175mm

5.7 lbs., 2.6 kg

7.9 lbs., 3.6 kg

copper voice coil

Polyimide former

neodymium magnet

vented core


Paper cone

cloth cone edge


15”, 381mm

8 ohms

300W

600W

34hz

47hz-3khz

98

80 oz.

0.375”, 9.53mm

2.5”, 63.5mm

34hz

6.15

0.33mh

5.9

0.36

0.34


411cc

0.31mm/n

16.0 t-m

70 grams

95

4.8mm

856.3 cm2

9.5mm

54-65 liters/ 1.9-2.3 cu.ft.

54-159 liters/ 1.9-5.6 cu.ft.


15.21”, 386.4mm

14.0”, 355.3mm

fitted as standard

fitted as standard

0.28”, 7.1mm

14.56”, 369.9mm

6.5”, 165mm

17.3 lbs., 7.9 kg

19.4 lbs., 8.8 kg

copper voice coil

Polyimide former

ferrite magnet



Paper cone

cloth cone edge


nam

eaP

Plic

atio

nco

nfig

urat

ion

low

end

resP

onse

low

end

shaP

emi

d-ra

nge

resP

onse

mid-

rang

e sh

aPe

high

-end

re

sPon

sevo

lume

/Po

wer

over

all c

olor

atio

n*br

eak-

uP

mode

sPo

wer

ran

gein

stru

ment

*ge

nre o

f mus

ic*

mav

eric

k12

" oPe

n ba

ck1

x 12

"ag

gres

sive

fat/

roun

dmo

dera

tew

arm

mode

rate

loud

erve

ry b

alan

ced,

war

m, fa

t, cl

ean

amer

ican

tone

wit

h fa

t low

s, w

arm

mids

, and

arti

cula

te h

ighs

. mor

e att

enua

tion

Prov

ides

mor

e war

mth

and

fatt

er lo

ws

medi

umuP

to 7

5 w

atts

lead

/rhy

thm

guita

ral

l gen

res

the

coPP

erhe

ad10

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

10"

mode

rate

tigh

tag

gres

sive

war

mmo

dera

telo

uder

extr

emel

y ba

lanc

ed v

inta

ge to

ne w

ith

a lit

tle c

ount

ry h

onk

and

a to

uch

of

clas

sic b

lues

tone

.me

dium

uP to

75

wat

tsle

ad/r

hyth

m gu

itar,

harm

onic

a

coun

try,

blue

s, b

lueg

rass

,

and

funk

del

ta d

emon

10" c

lose

d ba

ck1,

2, o

r 4

x 10

"mo

dera

tefa

t/ro

und

subd

ued

dark

subd

ued

loud

extr

emel

y ba

lanc

ed, d

ark,

crea

my sm

ooth

tone

slow

uP to

100

wat

tsle

ad/r

hyth

m gu

itar

jazz

, del

ta b

lues

, and

clas

sica

l

lil'

bud

dy10

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

10"

aggr

essi

vefa

t/ro

und

mode

rate

war

msu

bdue

dlo

uder

a cl

ean

and

full

tone

, slo

w to

bre

ak-u

P, bu

t cru

nchy

whe

n dr

iven

. smo

othe

r

and

less

def

ined

than

man

y 10

guita

r sP

eake

rs.

slow

uP to

50

wat

tsle

ad/r

hyth

m gu

itar,

harm

onic

aja

zz, r

ock,

and

blu

es

rag

in ca

jun

10" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 10

"ag

gres

sive

chun

kymo

dera

tecr

isP

aggr

essi

velo

udes

tve

ry lo

ud, t

ouch

sens

itiv

e and

res

Pons

ive w

ith

nice

bel

l sou

ndin

g toP

end

and

a lit

tle b

ite.

me

dium

uP to

75

wat

tsle

ad/r

hyth

m gu

itar

amer

ican

roc

k, b

lues

, and

coun

try

bla

ck m

ount

ain

12" o

Pen

or cl

osed

bac

k1

or 2

x 1

2"su

bdue

dti

ght

mode

rate

war

mag

gres

sive

loud

ervi

ntag

e ame

rica

n vo

iced

tone

wit

h ti

ght l

ows a

nd w

arm,

smoo

th u

PPer

mid

emPh

asis

and

hig

hs. g

reat

sing

le n

ote l

ead

tone

fast

uP to

30

wat

tsle

ad/r

hyth

m gu

itar

blue

s, cl

assi

c roc

k, co

untr

y

bla

ck Po

wde

r12

" oPe

n ba

ck1,

or

2 x

12"

subd

ued

tigh

tmo

dera

tecr

isP

aggr

essi

velo

uder

raw

and

bri

ght w

ith

tigh

t bas

s and

exPl

osiv

e mid

s and

hig

hsme

dium

uP to

75

wat

tsle

ad/r

hyth

m gu

itar

sout

hern

roc

k, co

lleg

e roc

k,

heav

y me

tal,

and

grun

ge

can

is m

ajor

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"ag

gres

sive

fat/

roun

dmo

dera

tew

arm

mode

rate

loud

est

clea

n, fu

ll v

inta

ge to

ne w

ith

fat,

war

m lo

ws,

woo

dy m

ids a

nd ta

me, s

moot

h

high

ssl

owuP

to 5

0 w

atts

lead

/rhy

thm

guita

rco

untr

y, bl

ues,

jazz

, cla

ssi-

cal,

rock

can

nabi

s rex

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"ag

gres

sive

fat/

roun

dmo

dera

tew

arm

mode

rate

loud

est

clea

n an

d fu

ll, w

ith

lots

of b

ody

and

sPar

kle.

smo

key

smoo

th w

ith

high

-end

defin

itio

n.sl

owuP

to 5

0 w

atts

lead

/rhy

thm

guita

r,

acou

stic

guita

r, k

eybo

ard

coun

try,

jazz

, cla

ssic

al

com

monw

ealt

h 12

"12

" oPe

n or

clos

ed b

ack

1, o

r 2

x 12

"ag

gres

sive

fat/

roun

dmo

dera

tew

arm

mode

rate

loud

erw

arm

and

rich

, but

als

o ve

ry cl

ean

and

wel

l def

ined

. gre

at Pr

esen

ce! v

ery

full

and

smoo

th. v

ery

littl

e con

e bre

ak-u

P, bu

t lik

es o

verd

rive

.sl

owuP

to 1

25 w

atts

lead

/rhy

thm/

stee

l

guita

ral

l gen

res

lil'

texa

s12

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

12"

aggr

essi

veti

ght

aggr

essi

vecr

isP

aggr

essi

velo

uder

very

bal

ance

d w

ith

cris

P mid

s and

toP e

nd b

ite.

tig

ht b

otto

m en

d, v

ery

amer

ican

tona

lity.

medi

umuP

to 1

25 w

atts

lead

/rhy

thm

guita

rcl

assi

c roc

k, b

lues

, cou

ntry

red

whi

te a

nd b

lues

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"mo

dera

teti

ght

mode

rate

war

mag

gres

sive

loud

erni

ce ti

ght l

ow-e

nd, s

moot

h mi

dran

ge a

nd to

P end

sPar

kle.

ame

rica

n co

usin

to

the g

over

nor.

medi

umuP

to 1

20 w

atts

lead

/rhy

thm

guita

rcl

assi

c ame

rica

n ro

ck to

ne o

f the

60's

and

70'

s

scr

eami

n ea

gle

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"ag

gres

sive

tigh

tmo

dera

tecr

isP

aggr

essi

velo

uder

brig

ht a

nd a

rtic

ulat

e ton

e wit

h sc

ream

in to

P end

and

tigh

t bas

sme

dium

uP to

50

wat

tsle

ad/r

hyth

m gu

itar

good

club

sPea

ker

for

amer

ican

blue

s and

roc

k

sw

amP t

hang

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"ag

gres

sive

fat/

roun

dag

gres

sive

dark

mode

rate

loud

est

very

Pow

erfu

l, th

ick

and

chun

ky to

ne. v

ery

touc

h se

nsit

ive w

ith

good

sust

ain.

awes

ome b

otto

m en

d.sl

owuP

to 1

50 w

atts

lead

/rhy

thm

guita

rve

ry a

meri

can

tone

suita

ble f

or

blue

s, r

ock,

and

jazz

tex

as h

eat

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"ag

gres

sive

fat/

chun

kyag

gres

sive

cris

Pmo

dera

telo

uder

nice

war

m, fa

t ton

e wit

h a

littl

e toP

end

bite

and

clar

ity.

ver

y to

uch

sens

itiv

e

wit

h a

hint

of b

riti

sh fl

avor

.me

dium

uP to

150

wat

tsle

ad/r

hyth

m gu

itar

amer

ican

roc

k, b

lues

, and

sout

hern

roc

k

com

monw

ealt

h 15

"15

" oPe

n ba

ck1,

or

2 x

15"

aggr

essi

vefa

t/ro

und

mode

rate

war

mmo

dera

telo

uder

war

m an

d ri

ch, b

ut a

lso

very

clea

n an

d w

ell d

efin

ed. g

reat

Pres

ence

! ver

y

full

and

smoo

th. v

ery

littl

e con

e bre

ak-u

P, bu

t lik

es o

verd

rive

.sl

owuP

to 1

50 w

atts

lead

/rhy

thm/

stee

l

guita

ral

l gen

res

rei

gnma

ker

12" o

Pen

back

1 x

12"

mode

rate

tigh

tag

gres

sive

war

mag

gres

sive

loud

er

very

bal

ance

d br

itis

h to

ne w

ith

tigh

t/Pu

nchy

low

s, w

arm/

deta

iled

mids

,

abun

dant

in h

armo

nic d

etai

l, an

d ar

ticu

late

hig

hs. m

ore a

tten

uati

on Pr

ovid

es

more

war

mth

and

fatt

er lo

ws.

medi

umuP

to 7

5 w

atts

lead

/rhy

thm

guita

ral

l gen

res

ram

rod

10" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 10

"ag

gres

sive

chun

kymo

dera

tew

arm

aggr

essi

velo

uder

very

loud

, gut

sy, a

nd m

eaty

ton

e w

ith

sing

ing

high

s an

d ni

ce, c

lear

over

tone

sme

dium

uP to

75

wat

tsle

ad/r

hyth

m gu

itar

brit

ish

rock

and

blu

es, c

ount

ry

and

jazz

red

fang

10

10" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 10

"ag

gres

sive

chun

kymo

dera

tew

arm

aggr

essi

velo

udes

tvi

ntag

e bri

tish

tone

wit

h lo

ads o

f det

ail,

chim

e and

grit

and

a n

icel

y de

fined

low

end

medi

umuP

to 5

0 w

atts

lead

/rhy

thm

guita

r

vint

age c

lass

ic b

riti

sh to

ne

for

blue

s, co

untr

y, ro

ck, in

die

and

jazz

the

gove

rnor

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"mo

dera

teti

ght

aggr

essi

vew

arm

mode

rate

loud

est

clas

sic

brit

ish

tone

. th

ick

and

raun

chy

wit

h lo

ts o

f mid

sfa

stuP

to 7

5 w

atts

lead

/rhy

thm

guita

rcl

assi

c bri

tish

roc

k to

ne o

f the

60's

and

70'

s

man

o w

ar12

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

12"

mode

rate

chun

kyag

gres

sive

cris

Pag

gres

sive

loud

est

a Pr

oven

and

rev

ered

soun

d, v

ery

loud

and

res

Pons

ive/

arti

cula

te in

ever

y

regi

ster

. chu

nky

and

solid

soun

d w

ith

a li

ttle

toP e

nd sP

arkl

esl

owuP

to 1

20 w

atts

lead

/rhy

thm

guita

r,

harm

onic

a

grea

t for

coll

ege r

ock,

clas

sic

rock

, gru

nge,

and

hea

vy m

etal

Pri

vate

jack

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"mo

dera

teti

ght

mode

rate

war

mag

gres

sive

loud

erth

ick

and

smoo

th, w

ith

lots

of m

ids a

nd ex

tend

ed h

ighs

. ver

y w

ell b

alan

ced

sPea

ker.

cla

ssic

bri

tish

flav

orme

dium

uP to

50

wat

tsle

ad/r

hyth

m gu

itar

clas

sic b

riti

sh to

ne fo

r bl

ues,

indi

e, ja

zz

red

fang

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"mo

dera

tech

unky

mode

rate

war

mag

gres

sive

loud

est

vint

age b

riti

sh so

und

wit

h w

arm

unde

rton

es a

nd h

igh-

end

sPar

kle

fast

uP to

50

wat

tsle

ad/r

hyth

m gu

itar

vint

age c

lass

ic b

riti

sh to

ne fo

r

blue

s, co

untr

y, in

die a

nd ja

zz

the

tone

sPot

ter

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"ag

gres

sive

fat/

roun

dag

gres

sive

war

mmo

dera

telo

uder

very

smoo

th a

nd w

arm

wit

h a

fat b

otto

m en

d an

d hi

ghs t

hat c

ut th

roug

h th

e

mix.

war

m an

d th

ick

over

tone

sme

dium

uP to

75

wat

tsle

ad/r

hyth

m gu

itar

auth

enti

c bri

tish

flav

or w

ell

suit

ed fo

r bl

ues a

nd cl

assi

c roc

k

the

tonk

er12

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

12"

aggr

essi

vefa

t/ro

und

mode

rate

war

mmo

dera

telo

udes

ta

very

fat,

clea

n an

d w

arm

tone

thro

ugh

the m

id-r

ange

, smo

oth

toP e

ndme

dium

uP to

150

wat

tsle

ad/r

hyth

m gu

itar

engl

ish

rock

, sou

ther

n ro

ck,

coun

try

(gre

at w

ith

a te

leca

ster

)

ton

kerl

ite

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"ag

gres

sive

fat/

roun

dmo

dera

tew

arm

aggr

essi

velo

udes

ta

nice

rou

nd, b

alan

ced

tone

like

the t

onke

r, b

ut w

ith

exte

nded

toP e

nd a

nd

less

low

er-m

id m

eat.

medi

umuP

to 1

25 w

atts

lead

/rhy

thm

guita

rbl

ues,

sout

hern

roc

k, co

untr

y

the

wiz

ard

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"ag

gres

sive

fat/

chun

kyag

gres

sive

war

mag

gres

sive

loud

est

very

art

icul

ate,

but

wit

h a

hint

of g

rit.

nic

e sus

tain

and

exce

Ptio

nall

y go

od

tigh

t bot

tom.

cro

ss b

etw

een

Priv

ate j

ack

and

the g

over

nor

medi

umuP

to 7

5 w

atts

lead

/rhy

thm

guita

rcl

assi

c roc

k to

nes o

f the

60'

s

and

70's

big

ben

15" o

Pen

back

1, o

r 2

x 1

5"ag

gres

sive

fat/

roun

dsu

bdue

dda

rkmo

dera

telo

uder

a ve

ry b

ig, c

lean

and

war

m br

itis

h so

und.

a so

mew

hat t

hroa

ty to

ne w

ith

fat

bass

and

smoo

th h

ighs

.me

dium

uP to

225

wat

tsle

ad/r

hyth

m gu

itar

delt

a bl

ues,

texa

s blu

es, j

azz,

and

coun

try

le

gend

102

8k10

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

10"

subd

ued

tigh

tmo

dera

tew

arm

aggr

essi

velo

udvi

ntag

e ame

rica

n to

ne w

ith

mode

rate

, but

tigh

t, Pe

rcus

sive

low

s and

exte

nded

high

s.fa

stuP

to 3

5 w

atts

lead

/rhy

thm

guita

r,

harm

onic

aco

untr

y, bl

ues,

roc

k

le

gend

105

810

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

10"

mode

rate

chun

kymo

dera

tew

arm

mode

rate

loud

ervi

ntag

e ame

rica

n to

ne w

ith

Punc

hy lo

ws a

nd w

arm,

smoo

th, b

lues

y mi

ds a

nd

high

s. f

atte

r le

gend

102

8k to

ne w

ith

more

deP

th.

medi

umuP

to 7

5 w

atts

lead

/rhy

thm

guita

rco

untr

y, bl

ues,

roc

k, ja

zz

le

gend

125

812

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

12"

subd

ued

tigh

tmo

dera

tew

arm

aggr

essi

velo

uder

vint

age a

meri

can

tone

wit

h ti

ght l

ows a

nd w

arm,

smoo

th m

ids a

nd h

ighs

.

stro

ng u

PPer

mid

emPh

asis

and

exte

nded

hig

hs.

medi

umuP

to 7

5 w

atts

lead

/rhy

thm

guita

rbl

ues,

roc

k

le

gend

v12

812

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

12"

mode

rate

tigh

tmo

dera

tew

arm

mode

rate

loud

erba

lanc

ed, m

ore m

ello

w b

riti

sh so

und

wit

h w

arm,

smoo

th m

ids a

nd h

ighs

and

tigh

t low

s.me

dium

uP to

120

wat

tsle

ad/r

hyth

m gu

itar

blue

s, r

ock,

hea

vy m

etal

le

gend

gb12

812

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

12"

mode

rate

fat/

roun

dmo

dera

tew

arm

mode

rate

loud

ercl

eane

r br

itis

h vo

iced

tone

wit

h a

full

low

end,

war

m, th

roat

y mi

ds a

nd a

ver

y

oPen

toP e

nd. a

clea

ner

Priv

ate j

ack

tone

wit

h a

fatt

er lo

w en

d.me

dium

uP to

50

wat

tsle

ad/r

hyth

m gu

itar

coun

try,

blue

s, r

ock

le

gend

121

812

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

12"

aggr

essi

vefa

t/ro

und

mode

rate

war

mmo

dera

telo

uder

very

bal

ance

d, fa

t, ro

und,

Punc

hy lo

ws a

nd w

arm,

smoo

th m

ids a

nd lo

ws,

ver

y

clea

n an

d ar

ticu

late

.me

dium

uP to

150

wat

tsle

ad/r

hyth

m gu

itar

coun

try,

blue

s, r

ock,

jazz

le

gend

151

815

" oPe

n ba

ck1,

or

2 x

15"

aggr

essi

veti

ght

mode

rate

war

mmo

dera

telo

uder

wel

l bal

ance

d 15

" wit

h ti

ght/

Punc

hy lo

ws a

nd w

arm,

smoo

th m

ids a

nd h

ighs

.me

dium

uP to

150

wat

tsle

ad/r

hyth

m gu

itar

coun

try,

blue

s, r

ock,

jazz

*Col

orat

ion,

Ton

e, a

nd t

he a

ppro

pria

tene

ss o

f a s

peak

er fo

r a

spec

ific

genr

e of

mus

ic a

re v

ery

subj

ectiv

e su

bjec

ts.

Emin

ence

has

ded

icat

ed c

ount

less

hou

rs t

o th

e to

nal e

valu

atio

n of

eac

h sp

eake

r in

the

se t

wo

seri

es.

Add

ition

al li

sten

ing

test

s w

ere

also

con

duct

ed b

y g

reg

Mar

tin, l

ead

guita

rist

for

the

Kent

ucky

Hea

dhun

ters

and

Ste

ve W

ilson

of A

mbi

ent

Soun

d, b

oth

reco

gniz

ed in

the

mus

ic in

dust

ry a

s ex

pert

s on

the

sub

ject

of g

uita

r to

ne.

This

dat

a is

pro

vide

d to

be

used

as

a ge

nera

l gu

idel

ine

to a

id in

gui

tar

spea

ker

sele

ctio

n, h

owev

er t

he s

uita

bilit

y of

a s

peci

fic s

peak

er fo

r a

spec

ific

purp

ose

is a

mat

ter

of p

erso

nal t

aste

and

can

onl

y be

det

erm

ined

by

you

the

user

. Em

inen

ce m

akes

no

guar

ante

es r

egar

ding

the

sui

tabi

lity

of

any

spea

ker

in t

hese

ser

ies

for

any

spec

ific

appl

icat

ion.

gu

ita

r s

Pea

Ker

to

na

l c

ha

ra

cte

ris

tic

s a

nd

aP

Pli

ca

tio

n g

uid

e

nam

eaP

Plic

atio

nco

nfig

urat

ion

low

end

resP

onse

low

end

shaP

emi

d-ra

nge

resP

onse

mid-

rang

e sh

aPe

high

-end

re

sPon

sevo

lume

/Po

wer

over

all c

olor

atio

n*br

eak-

uP

mode

sPo

wer

ran

gein

stru

ment

*ge

nre o

f mus

ic*

mav

eric

k12

" oPe

n ba

ck1

x 12

"ag

gres

sive

fat/

roun

dmo

dera

tew

arm

mode

rate

loud

erve

ry b

alan

ced,

war

m, fa

t, cl

ean

amer

ican

tone

wit

h fa

t low

s, w

arm

mids

, and

arti

cula

te h

ighs

. mor

e att

enua

tion

Prov

ides

mor

e war

mth

and

fatt

er lo

ws

medi

umuP

to 7

5 w

atts

lead

/rhy

thm

guita

ral

l gen

res

the

coPP

erhe

ad10

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

10"

mode

rate

tigh

tag

gres

sive

war

mmo

dera

telo

uder

extr

emel

y ba

lanc

ed v

inta

ge to

ne w

ith

a lit

tle c

ount

ry h

onk

and

a to

uch

of

clas

sic b

lues

tone

.me

dium

uP to

75

wat

tsle

ad/r

hyth

m gu

itar,

harm

onic

a

coun

try,

blue

s, b

lueg

rass

,

and

funk

del

ta d

emon

10" c

lose

d ba

ck1,

2, o

r 4

x 10

"mo

dera

tefa

t/ro

und

subd

ued

dark

subd

ued

loud

extr

emel

y ba

lanc

ed, d

ark,

crea

my sm

ooth

tone

slow

uP to

100

wat

tsle

ad/r

hyth

m gu

itar

jazz

, del

ta b

lues

, and

clas

sica

l

lil'

bud

dy10

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

10"

aggr

essi

vefa

t/ro

und

mode

rate

war

msu

bdue

dlo

uder

a cl

ean

and

full

tone

, slo

w to

bre

ak-u

P, bu

t cru

nchy

whe

n dr

iven

. smo

othe

r

and

less

def

ined

than

man

y 10

guita

r sP

eake

rs.

slow

uP to

50

wat

tsle

ad/r

hyth

m gu

itar,

harm

onic

aja

zz, r

ock,

and

blu

es

rag

in ca

jun

10" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 10

"ag

gres

sive

chun

kymo

dera

tecr

isP

aggr

essi

velo

udes

tve

ry lo

ud, t

ouch

sens

itiv

e and

res

Pons

ive w

ith

nice

bel

l sou

ndin

g toP

end

and

a lit

tle b

ite.

me

dium

uP to

75

wat

tsle

ad/r

hyth

m gu

itar

amer

ican

roc

k, b

lues

, and

coun

try

bla

ck m

ount

ain

12" o

Pen

or cl

osed

bac

k1

or 2

x 1

2"su

bdue

dti

ght

mode

rate

war

mag

gres

sive

loud

ervi

ntag

e ame

rica

n vo

iced

tone

wit

h ti

ght l

ows a

nd w

arm,

smoo

th u

PPer

mid

emPh

asis

and

hig

hs. g

reat

sing

le n

ote l

ead

tone

fast

uP to

30

wat

tsle

ad/r

hyth

m gu

itar

blue

s, cl

assi

c roc

k, co

untr

y

bla

ck Po

wde

r12

" oPe

n ba

ck1,

or

2 x

12"

subd

ued

tigh

tmo

dera

tecr

isP

aggr

essi

velo

uder

raw

and

bri

ght w

ith

tigh

t bas

s and

exPl

osiv

e mid

s and

hig

hsme

dium

uP to

75

wat

tsle

ad/r

hyth

m gu

itar

sout

hern

roc

k, co

lleg

e roc

k,

heav

y me

tal,

and

grun

ge

can

is m

ajor

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"ag

gres

sive

fat/

roun

dmo

dera

tew

arm

mode

rate

loud

est

clea

n, fu

ll v

inta

ge to

ne w

ith

fat,

war

m lo

ws,

woo

dy m

ids a

nd ta

me, s

moot

h

high

ssl

owuP

to 5

0 w

atts

lead

/rhy

thm

guita

rco

untr

y, bl

ues,

jazz

, cla

ssi-

cal,

rock

can

nabi

s rex

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"ag

gres

sive

fat/

roun

dmo

dera

tew

arm

mode

rate

loud

est

clea

n an

d fu

ll, w

ith

lots

of b

ody

and

sPar

kle.

smo

key

smoo

th w

ith

high

-end

defin

itio

n.sl

owuP

to 5

0 w

atts

lead

/rhy

thm

guita

r,

acou

stic

guita

r, k

eybo

ard

coun

try,

jazz

, cla

ssic

al

com

monw

ealt

h 12

"12

" oPe

n or

clos

ed b

ack

1, o

r 2

x 12

"ag

gres

sive

fat/

roun

dmo

dera

tew

arm

mode

rate

loud

erw

arm

and

rich

, but

als

o ve

ry cl

ean

and

wel

l def

ined

. gre

at Pr

esen

ce! v

ery

full

and

smoo

th. v

ery

littl

e con

e bre

ak-u

P, bu

t lik

es o

verd

rive

.sl

owuP

to 1

25 w

atts

lead

/rhy

thm/

stee

l

guita

ral

l gen

res

lil'

texa

s12

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

12"

aggr

essi

veti

ght

aggr

essi

vecr

isP

aggr

essi

velo

uder

very

bal

ance

d w

ith

cris

P mid

s and

toP e

nd b

ite.

tig

ht b

otto

m en

d, v

ery

amer

ican

tona

lity.

medi

umuP

to 1

25 w

atts

lead

/rhy

thm

guita

rcl

assi

c roc

k, b

lues

, cou

ntry

red

whi

te a

nd b

lues

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"mo

dera

teti

ght

mode

rate

war

mag

gres

sive

loud

erni

ce ti

ght l

ow-e

nd, s

moot

h mi

dran

ge a

nd to

P end

sPar

kle.

ame

rica

n co

usin

to

the g

over

nor.

medi

umuP

to 1

20 w

atts

lead

/rhy

thm

guita

rcl

assi

c ame

rica

n ro

ck to

ne o

f the

60's

and

70'

s

scr

eami

n ea

gle

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"ag

gres

sive

tigh

tmo

dera

tecr

isP

aggr

essi

velo

uder

brig

ht a

nd a

rtic

ulat

e ton

e wit

h sc

ream

in to

P end

and

tigh

t bas

sme

dium

uP to

50

wat

tsle

ad/r

hyth

m gu

itar

good

club

sPea

ker

for

amer

ican

blue

s and

roc

k

sw

amP t

hang

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"ag

gres

sive

fat/

roun

dag

gres

sive

dark

mode

rate

loud

est

very

Pow

erfu

l, th

ick

and

chun

ky to

ne. v

ery

touc

h se

nsit

ive w

ith

good

sust

ain.

awes

ome b

otto

m en

d.sl

owuP

to 1

50 w

atts

lead

/rhy

thm

guita

rve

ry a

meri

can

tone

suita

ble f

or

blue

s, r

ock,

and

jazz

tex

as h

eat

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"ag

gres

sive

fat/

chun

kyag

gres

sive

cris

Pmo

dera

telo

uder

nice

war

m, fa

t ton

e wit

h a

littl

e toP

end

bite

and

clar

ity.

ver

y to

uch

sens

itiv

e

wit

h a

hint

of b

riti

sh fl

avor

.me

dium

uP to

150

wat

tsle

ad/r

hyth

m gu

itar

amer

ican

roc

k, b

lues

, and

sout

hern

roc

k

com

monw

ealt

h 15

"15

" oPe

n ba

ck1,

or

2 x

15"

aggr

essi

vefa

t/ro

und

mode

rate

war

mmo

dera

telo

uder

war

m an

d ri

ch, b

ut a

lso

very

clea

n an

d w

ell d

efin

ed. g

reat

Pres

ence

! ver

y

full

and

smoo

th. v

ery

littl

e con

e bre

ak-u

P, bu

t lik

es o

verd

rive

.sl

owuP

to 1

50 w

atts

lead

/rhy

thm/

stee

l

guita

ral

l gen

res

rei

gnma

ker

12" o

Pen

back

1 x

12"

mode

rate

tigh

tag

gres

sive

war

mag

gres

sive

loud

er

very

bal

ance

d br

itis

h to

ne w

ith

tigh

t/Pu

nchy

low

s, w

arm/

deta

iled

mids

,

abun

dant

in h

armo

nic d

etai

l, an

d ar

ticu

late

hig

hs. m

ore a

tten

uati

on Pr

ovid

es

more

war

mth

and

fatt

er lo

ws.

medi

umuP

to 7

5 w

atts

lead

/rhy

thm

guita

ral

l gen

res

ram

rod

10" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 10

"ag

gres

sive

chun

kymo

dera

tew

arm

aggr

essi

velo

uder

very

loud

, gut

sy, a

nd m

eaty

ton

e w

ith

sing

ing

high

s an

d ni

ce, c

lear

over

tone

sme

dium

uP to

75

wat

tsle

ad/r

hyth

m gu

itar

brit

ish

rock

and

blu

es, c

ount

ry

and

jazz

red

fang

10

10" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 10

"ag

gres

sive

chun

kymo

dera

tew

arm

aggr

essi

velo

udes

tvi

ntag

e bri

tish

tone

wit

h lo

ads o

f det

ail,

chim

e and

grit

and

a n

icel

y de

fined

low

end

medi

umuP

to 5

0 w

atts

lead

/rhy

thm

guita

r

vint

age c

lass

ic b

riti

sh to

ne

for

blue

s, co

untr

y, ro

ck, in

die

and

jazz

the

gove

rnor

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"mo

dera

teti

ght

aggr

essi

vew

arm

mode

rate

loud

est

clas

sic

brit

ish

tone

. th

ick

and

raun

chy

wit

h lo

ts o

f mid

sfa

stuP

to 7

5 w

atts

lead

/rhy

thm

guita

rcl

assi

c bri

tish

roc

k to

ne o

f the

60's

and

70'

s

man

o w

ar12

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

12"

mode

rate

chun

kyag

gres

sive

cris

Pag

gres

sive

loud

est

a Pr

oven

and

rev

ered

soun

d, v

ery

loud

and

res

Pons

ive/

arti

cula

te in

ever

y

regi

ster

. chu

nky

and

solid

soun

d w

ith

a li

ttle

toP e

nd sP

arkl

esl

owuP

to 1

20 w

atts

lead

/rhy

thm

guita

r,

harm

onic

a

grea

t for

coll

ege r

ock,

clas

sic

rock

, gru

nge,

and

hea

vy m

etal

Pri

vate

jack

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"mo

dera

teti

ght

mode

rate

war

mag

gres

sive

loud

erth

ick

and

smoo

th, w

ith

lots

of m

ids a

nd ex

tend

ed h

ighs

. ver

y w

ell b

alan

ced

sPea

ker.

cla

ssic

bri

tish

flav

orme

dium

uP to

50

wat

tsle

ad/r

hyth

m gu

itar

clas

sic b

riti

sh to

ne fo

r bl

ues,

indi

e, ja

zz

red

fang

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"mo

dera

tech

unky

mode

rate

war

mag

gres

sive

loud

est

vint

age b

riti

sh so

und

wit

h w

arm

unde

rton

es a

nd h

igh-

end

sPar

kle

fast

uP to

50

wat

tsle

ad/r

hyth

m gu

itar

vint

age c

lass

ic b

riti

sh to

ne fo

r

blue

s, co

untr

y, in

die a

nd ja

zz

the

tone

sPot

ter

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"ag

gres

sive

fat/

roun

dag

gres

sive

war

mmo

dera

telo

uder

very

smoo

th a

nd w

arm

wit

h a

fat b

otto

m en

d an

d hi

ghs t

hat c

ut th

roug

h th

e

mix.

war

m an

d th

ick

over

tone

sme

dium

uP to

75

wat

tsle

ad/r

hyth

m gu

itar

auth

enti

c bri

tish

flav

or w

ell

suit

ed fo

r bl

ues a

nd cl

assi

c roc

k

the

tonk

er12

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

12"

aggr

essi

vefa

t/ro

und

mode

rate

war

mmo

dera

telo

udes

ta

very

fat,

clea

n an

d w

arm

tone

thro

ugh

the m

id-r

ange

, smo

oth

toP e

ndme

dium

uP to

150

wat

tsle

ad/r

hyth

m gu

itar

engl

ish

rock

, sou

ther

n ro

ck,

coun

try

(gre

at w

ith

a te

leca

ster

)

ton

kerl

ite

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"ag

gres

sive

fat/

roun

dmo

dera

tew

arm

aggr

essi

velo

udes

ta

nice

rou

nd, b

alan

ced

tone

like

the t

onke

r, b

ut w

ith

exte

nded

toP e

nd a

nd

less

low

er-m

id m

eat.

medi

umuP

to 1

25 w

atts

lead

/rhy

thm

guita

rbl

ues,

sout

hern

roc

k, co

untr

y

the

wiz

ard

12" o

Pen

or cl

osed

bac

k1,

2, o

r 4

x 12

"ag

gres

sive

fat/

chun

kyag

gres

sive

war

mag

gres

sive

loud

est

very

art

icul

ate,

but

wit

h a

hint

of g

rit.

nic

e sus

tain

and

exce

Ptio

nall

y go

od

tigh

t bot

tom.

cro

ss b

etw

een

Priv

ate j

ack

and

the g

over

nor

medi

umuP

to 7

5 w

atts

lead

/rhy

thm

guita

rcl

assi

c roc

k to

nes o

f the

60'

s

and

70's

big

ben

15" o

Pen

back

1, o

r 2

x 1

5"ag

gres

sive

fat/

roun

dsu

bdue

dda

rkmo

dera

telo

uder

a ve

ry b

ig, c

lean

and

war

m br

itis

h so

und.

a so

mew

hat t

hroa

ty to

ne w

ith

fat

bass

and

smoo

th h

ighs

.me

dium

uP to

225

wat

tsle

ad/r

hyth

m gu

itar

delt

a bl

ues,

texa

s blu

es, j

azz,

and

coun

try

le

gend

102

8k10

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

10"

subd

ued

tigh

tmo

dera

tew

arm

aggr

essi

velo

udvi

ntag

e ame

rica

n to

ne w

ith

mode

rate

, but

tigh

t, Pe

rcus

sive

low

s and

exte

nded

high

s.fa

stuP

to 3

5 w

atts

lead

/rhy

thm

guita

r,

harm

onic

aco

untr

y, bl

ues,

roc

k

le

gend

105

810

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

10"

mode

rate

chun

kymo

dera

tew

arm

mode

rate

loud

ervi

ntag

e ame

rica

n to

ne w

ith

Punc

hy lo

ws a

nd w

arm,

smoo

th, b

lues

y mi

ds a

nd

high

s. f

atte

r le

gend

102

8k to

ne w

ith

more

deP

th.

medi

umuP

to 7

5 w

atts

lead

/rhy

thm

guita

rco

untr

y, bl

ues,

roc

k, ja

zz

le

gend

125

812

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

12"

subd

ued

tigh

tmo

dera

tew

arm

aggr

essi

velo

uder

vint

age a

meri

can

tone

wit

h ti

ght l

ows a

nd w

arm,

smoo

th m

ids a

nd h

ighs

.

stro

ng u

PPer

mid

emPh

asis

and

exte

nded

hig

hs.

medi

umuP

to 7

5 w

atts

lead

/rhy

thm

guita

rbl

ues,

roc

k

le

gend

v12

812

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

12"

mode

rate

tigh

tmo

dera

tew

arm

mode

rate

loud

erba

lanc

ed, m

ore m

ello

w b

riti

sh so

und

wit

h w

arm,

smoo

th m

ids a

nd h

ighs

and

tigh

t low

s.me

dium

uP to

120

wat

tsle

ad/r

hyth

m gu

itar

blue

s, r

ock,

hea

vy m

etal

le

gend

gb12

812

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

12"

mode

rate

fat/

roun

dmo

dera

tew

arm

mode

rate

loud

ercl

eane

r br

itis

h vo

iced

tone

wit

h a

full

low

end,

war

m, th

roat

y mi

ds a

nd a

ver

y

oPen

toP e

nd. a

clea

ner

Priv

ate j

ack

tone

wit

h a

fatt

er lo

w en

d.me

dium

uP to

50

wat

tsle

ad/r

hyth

m gu

itar

coun

try,

blue

s, r

ock

le

gend

121

812

" oPe

n or

clos

ed b

ack

1, 2

, or

4 x

12"

aggr

essi

vefa

t/ro

und

mode

rate

war

mmo

dera

telo

uder

very

bal

ance

d, fa

t, ro

und,

Punc

hy lo

ws a

nd w

arm,

smoo

th m

ids a

nd lo

ws,

ver

y

clea

n an

d ar

ticu

late

.me

dium

uP to

150

wat

tsle

ad/r

hyth

m gu

itar

coun

try,

blue

s, r

ock,

jazz

le

gend

151

815

" oPe

n ba

ck1,

or

2 x

15"

aggr

essi

veti

ght

mode

rate

war

mmo

dera

telo

uder

wel

l bal

ance

d 15

" wit

h ti

ght/

Punc

hy lo

ws a

nd w

arm,

smoo

th m

ids a

nd h

ighs

.me

dium

uP to

150

wat

tsle

ad/r

hyth

m gu

itar

coun

try,

blue

s, r

ock,

jazz

52

understanding loudsPeaKer dataThe ability to choose the most appropriate loudspeaker for a particular enclosure is directly related to your understanding of the performance data that

manufacturers provide with their products. Prior to 1970, there were no easy or affordable methods accepted as standard in the industry for obtaining this data.

The recognized methods were expensive and often unrealistic for the thousands of individuals needing loudspeaker performance information.

thiele-small parametersin the early seventies, several technical papers were

presented to the AES (Audio Engineering Society) that

resulted in the development of what we know today

as “Thiele-Small Parameters”. These papers were

authored by A.N. Thiele, and richard H. Small.

The Thiele and Small papers concentrated on

showing how the following parameters define the

relationship between a speaker and a particular

enclosure. Eminence recommends that you develop

a basic understanding for the meaning of each

parameter so that you can make informed decisions

when choosing your loudspeakers.

fs This parameter is the free-air resonant

frequency of a speaker. Simply stated, it is the

point at which the weight of the moving parts of the

speaker becomes balanced with the force of the

speaker suspension when in motion. it is important

to know this information so that you can prevent your

enclosure from ringing like a bell when it reaches

its resonant frequency. As a general rule of thumb,

a lower Fs indicates a woofer that would be better

for low-frequency reproduction than a woofer with

a higher Fs. However, other parameters affect the

ultimate performance of a woofer as well and may

make a speaker with a higher Fs a better candidate

for your application.

re This parameter is very simply the dC resistance

of the driver in question. in other words, this

measurement is made with an ohm meter and is

often referred to as the “dCr”. This measurement

will almost always be less than the impedance

listed by the manufacturer. Many consumers get

concerned when they see that the re is less than the

published impedance and fear that their amplifier

is getting a load that is too heavy. due to the fact

that the inductance of a speaker rises with a rise in

frequency, it is not likely that the amplifier will often

see the dC resistance as its load.

le This parameter is the voice coil inductance

of the speaker measured in millihenries (mH). The

industry standard is to measure inductance at 1,000

Hz. This is a difficult parameter to explain, but

basically as frequencies get higher there will be a rise

in impedance above the dC resistance rating. This

can be attributed to the fact that the voice coil is

acting as an inductor. Consequently, the impedance

of a speaker is not a fixed resistance, but can be

represented as a curve that changes as the input

frequency changes. Maximum impedance or Zmax

occurs at Fs.

Q Parameters Qts, Qes, and Qtc are all

measurements related to the control of a speaker’s

suspension when it reaches the resonant frequency.

Qms is a measurement of the control coming

from the speaker’s mechanical suspension system;

the surround and spider.

Qes is a measurement of the control coming from

the speaker’s electrical suspension system; the voice

coil and magnet.

Qts is called the “Total Q” of the driver and is

derived from an equation where Qes is multiplied by

Qms and the result is divided by the sum of the same.

The result is Qts. As a general guideline, woofers fall

into three categories relative to their Qts:

1. Qts of .4 or below indicates a woofer well suited

for a vented enclosure.

2. Qts between .4 and .7 indicates a woofer well

suited for a sealed enclosure.

3. Qts of .7 or above indicates a woofer well suited

for free-air or infinite baffle applications.

These suggestions are simply rules of thumb and do

not always apply. For instance, the Eminence Kilomax

18 has a Qts of .56 that would indicate a sealed

enclosure, but we know that the Kilomax is one of

the most highly regarded woofers in the Professional

Audio industry for a ported enclosure.

vas/cms Vas (Not to be confused with

the recommended enclosure size.) represents

the equivalent stiffness in an air volume to the

force of the compliance (Cms) of the suspension

in a particular speaker. it is one of the trickiest

parameters to measure. Air changes relative to

humidity and temperature. Cms is measured in

meters per Newton. it is the force exerted by the

mechanical suspension of the speaker. it is simply

a measurement of its stiffness.

vd This parameter is the Peak diaphragm

displacement Volume. it is the xmax (Voice Coil

Overhang) of the driver multiplied by the Sd (Surface

area of the cone). Simply stated it is a measurement

of how much air the cone will move at full excursion

and is usually noted in cc.

Bl Expressed in Tesla meters is a measurement

of the motor strength of a speaker. This is created

by the product of the magnetic field strength times

the length of wire in the field. if you were to take

a given mass, that when placed on the cone of a

speaker would move the cone downward from its

home position, then measure the current in amperes

required to move the cone back to home position,

you can calculate Bl. The formula is Ma in grams

divided the current in amperes.

mms This parameter is the combination of the

weight of the cone assembly plus the driver radiation

mass load. Confusing…but the weight of the cone

assembly is easy. Most manufacturers know that

weight when the speaker is designed. it is the sum

of the weight of the cone assembly components. The

driver radiation mass load is the confusing part. in

simple terminology, it is the weight of the air that the

cone will have to push. Air certainly has mass and

needs to be recognized in these calculations.

rms This parameter represents the mechanical

resistance of a driver’s suspension losses. it is a

measurement of the absorption qualities of the

speaker suspension and is stated in N*sec/m.

eBP This measurement represents Fs / Qe. it is

used in many enclosure design formulas to determine

if a speaker is more suitable for a closed or vented

design. An EBP close to 100 usually indicates a

speaker that is best suited for a vented enclosure.

On the contrary, an EBP closer to 50 usually indicates

a speaker best suited for a closed box design.

xmax Short for Maximum Linear Excursion.

Speaker output becomes non-linear when the voice

coil begins to leave the magnetic gap. Although

suspensions can create non-linearity in output, the

point at which the number of turns in the gap (see

Bl) begins to decrease is when distortion starts to

increase. Some manufacturers have often used the

maximum excursion of the speaker which when

exceeded would result in mechanical damage. This

parameter is recognized as xlim. The bottom line is;

be sure you are comparing apples to apples. Most

manufacturers will specify the way this measurement

is obtained. distortion is typically very audible before

xlim is reached due to the increase in non-linearity in

the motor and suspensions.

Continued on page 54.

725 Pleasant Valley Dr. Springboro, OH 45066

Parts Express stocks more Eminence drivers than anyone — along with more than 15,000 audio, video and speaker building components!

Visit parts-express.com or call 1-800-338-0531 to order your FREE 2011 catalog!

54

understanding loudsPeaKer data, continued from Page 52.

designing enclosures

sd This parameter is the actual surface area of the

cone, normally given in square cm.

Zmax This parameter represents the speaker’s

impedance at resonance and it is usually many times

the dCr of the driver.

additional Performance datain addition to Thiele-Small Parameters, loudspeaker

manufacturers typically publish additional

measurements and performance information. Again,

it is wise to become familiar with this data and what

it actually means to you.

usable frequency range This data

is relatively self-explanatory. it is the frequency

range for which Eminence feels the device will prove

useful. Each manufacturer uses different techniques

for determining “Usable Frequency range”. Most

methods are recognized as ACCEPTABLE in the

industry, but can lend different results.

Eminence response curves are measured as follows:

All speakers are tested at 1W/1m using a variety of

test set-ups for the appropriate impedance. [LMS

using 0.25” supplied microphone (software calibrated)

mounted 1m from wall/baffle.] [2 ft. x 2 ft. baffle is

built into the wall with the speaker mounted flush

against a steel ring for minimum diffraction.] [Hafler

P1500 Trans-Nova amplifier] [2,700 cu. ft. anechoic

chamber with fiberglass on all six surfaces (three

with custom-made wedges).]

spl (Average Sensitivity) This data represents one

of the most useful specifications published for any

transducer. it is a representation of the output you

can expect from a device relative to the input power.

This is important because it requires 2 times the

power to increase the volume of a speaker 3 dB.

To increase the volume of a 50-watt guitar amplifier 3

dB (an audible, but relatively small amount), it would

require a total of 100 watts of power. The same

thing could be achieved by replacing the speaker

with one that is 3 dB more sensitive (usually a more

economical alternative).

Most manufacturers determine sensitivity by putting

the speaker in a baffle and measuring the sound

pressure level inside an anechoic chamber at a

distance of one meter, with 1 watt of input power

across the frequency response curve. A loudspeaker

measurement software program then would

generally calculate the average sound pressure level

over the response curve. This is a good method

and usually very accurate. The problem is that one

manufacturer may place the microphone one meter

from the dust cap of the speaker and gain a distinct

advantage over the manufacturer who placed the

microphone one meter from the baffle board. Again,

be sure you understand how this specification was

derived.

The Eminence method represents the average output

across the usable frequency range when applying

1W/1m into the nominal impedance. ie 2.83V/8ohms,

4V/16ohms.

Power rating This specification is very

important to transducer selection. Obviously, you

need to choose a loudspeaker that is capable of

handling the input power you are going to provide.

By the same token, you can destroy a loudspeaker by

using too little power.

generally speaking, the number one contributor to

a transducer’s ability to handle power is its ability

to release thermal energy. Those loudspeaker

characteristics are affected by several design choices,

but most notably voice coil size, magnet size, venting,

and the adhesives used in voice coil construction.

Larger coil and magnet sizes provide more area for

heat to dissipate, while venting allows thermal energy

to escape and cooler air to enter the motor structure.

Equally important is the ability of the voice coil to

handle thermal energy. Eminence is well known

for the use of proprietary adhesives and voice coil

components that maximize the coil’s ability to handle

extreme temperatures.

Mechanical factors must also be considered when

determining power handling. A transducer might

be able to handle 1,000 watts from a thermal

perspective, but would fail long before that level

was reached from a mechanical issue such as the

coil hitting the back plate, the coil coming out of

the gap, the cone buckling from too much outward

movement, or the spider bottoming on the top plate.

Be sure to consider the suggested usable frequency

range and the xlim parameter in conjunction with

the power rating and enclosure design to avoid such

failures.

The Eminence power rating is derived using an EiA

426A noise source and test standard. All tests are

conducted for 8 hours in a free-air, non-temperature

controlled environment. The Eminence Music

Program rating is double that of our standard Watts

rating.

eminence designer is a state-of-the-art loudspeaker enclosure design program

for PCs. it can calculate a box design that will bring out the best response from a loudspeaker

in seconds - it can even suggest a box for your loudspeaker! Eminence designer models

closed, vented, bandpass and passive radiator boxes. it will print box drawings and graphs for

a professional presentation. Eminence designer is quick to learn and easy to use.

1. Enter the loudspeaker parameters (for Eminence loudspeakers, simply select the model;

other loudspeaker parameters can be entered manually).

2. Calculate the box volume and tuning. This is very easy with the help of the

“Suggest” button.

3. Evaluate the performance from the nine graphs.

When the program is first run, a “Welcome” window will appear to help you configure the

program and to guide you through its illustrated online manual. The online manual contains

a “Box designers guide” to help beginners learn about sound, speakers and box design.

A “reference” section describe every feature of the program.

to learn more visit www.eminence.com.

eminence speaker llc

P.o. box 360 | 838 mulberry Pike | eminence, ky 40019Phone: 502.845.5622 | fax: 502.845.5653e-mail: [email protected] | www.eminence.com

Catalogo Eminence 2011

Documents

Transcript of Catalogo Eminence 2011