mBJC-5.00.0 BJC-510’0 ., PARTS CATALOG ’

Canon .

0698 SE 0.55-0

mBJC-5.00.0 BJC-510’0 ., PARTS CATALOG ’

Canon .

ApplicationThis manual has been issued by Canon Inc. for qualifiedperson to learn technical theory, installation, maintenance,and repair of products. This manual covers all localitieswhere the products are sold. For this reason, there may beinformation in this manual that does not apply to yourlocality.

CorrectionsThis manual could include technical inaccuracies ortypographical errors due to improvements or changes in theproducts. When changes occur in applicable products or inthe content of this manual, Canon will release technicalinformation as the need arises. In the event of majorchanges in the contents of this manual over a long or shortperiod. Canon will issue a new editions of this manual.

The following paragraph does not apply to any countrieswhere such provisions are inconsistent with local low.

TrademarksThe product names and company names described in thismanual are the registered trademarks of the individualcompanies.

CopyrightThis manual is copyrighted with all rights reserved. Underthe copyright laws, this manual may not be copied,reproduced or translated into another language, in whole orin part, without the written consent of Canon Inc.

Copyright 1998 by Canon Inc.CANON INC.BJ Printer Technical Support Dept.16-1, Shimonoge 3-chome, Takatsu-ku, Kawasaki-shi,Kanagawa 213, Japan

DTP SystemThis manual was produced on an Apple Power Macintosh

7600/120 personal computer and CanonLBP-2030PS laserbeam printer, final pages were printed on Valityper 4300J.A Canon mo-5001S Magneto-optical Storage Subsystemwith mo-502M Magneto-Optical Storage Disk Cartridgeand mo-IF2 Machitosh interface kit were used for storinglarge volumes of page layout, graphic and parts list data forthis manual.Parts layout illustrations and Logotypes were created usingMACROMEDIA FreeHand 7J.Pattern drawing were scaned by EPSON GT-8000 scannerwith Adobe photoshop.Documents and page layouts were created usingQuarkXpress 3.3J.Parts lists were created using Helix Tecnologies HerixXpress and converted to EPS files.

I

I. CONTENTS

A. ILLUSTRATION INDEX

B. PARTS LAYOUT & PARTS LIST

C. SCREWS & WASHERS LIST

D. TOOL

E. NUMERICAL INDEX

II

II. ABOUT THIS MANUAL

A. ILLUSTRATION INDEXFor illustration index, the parts layoutillustrations in this parts catalog arelisted in abbreviated form in order ofillustration number to identify the pagesthey appear on. To find an illustration ofa part, see the ILLUSTRATION INDEX.

B. PARTS LAYOUT & PARTS LISTParts la yout illustrationa) Parts search Find a part from the parts layoutillustration and find its key numberfrom the parts list to identify the partnumber and name. For screws, nuts,washers, lock washers, pins, spacers,see SCREWS &WASHERS LIST.Note: If parts have the same or similar

shape but different specifications,their key number is assigned toseveral part numbers and namesin the parts list.

b) Parts replacement procedureTo replace parts, the parts layoutillustrations have figure numbersaccording to the disassembly procedureof the product. The parts that requirecareful work are shown the illustration.

Parts lista) FIGURE & KEY No.The FIGURE & KEY No. columncorresponds to the key numbersassigned to the parts in the partslayout illustration.It also corresponds to the part locationsprinted on the PC board.

b) PART NUMBERThe PART NUMBER column gives thepart numbers corresponding to the keynumbers. To order a part, indicate thepart number clearly.Note: Parts marked NPN are not

service parts.

c) RANKThe service parts with N in the RANKcolumn are order parts.

d) QTYThe QTY column gives the number ofparts in the corresponding componentslayout illustration.

e) DESCRIPTIONThe DESCRIPTION column gives thepart names in English.To order a part, indicate the partname, too.

C. SCREWS & WASHERS LISTThis is a list of screws, nuts, washers,lock washers, pins, and spacers. The QTY column does not give thenumber of parts used.

D. TOOL LISTThis is a list of tools used for servicingproducts.

E. NUMERICAL INDEXAll the parts listed in this parts catalogare arranged in order of part number.You can identify part locations andnames from the NUMERICAL INDEX.

III

IV

3

4

2

1

S3

S3

S1

S2

5

2

1

S1

11

12

10

1

3

2

9

4

5

6

7

8

1

2

5

6

7

4

3

Unlatch two claws on the left and the front clawon the right first. Then, press the part shown bythe arrow to remove Key No. 7.

See PageB - 3

COVERFIGURE 2

See PageB - 5

SHEET FEEDER UNITFIGURE 3

See PageB - 7

FIGURE 1TRAY & AC ADAPTER See Page

B - 1

A. ILLUSTRATION INDEX

A-1

FIGURE 4LOGIC BOARD & BOTTOM CASE

PURGE UNIT & STAY UNITMOTORS

1

2

2

1

S1

S1

S1A

1

2

3 4

5

S1

S1

S3

When assembling or disassembling Key No. 5,its edge should not catch the gear.

Remove Key No. 5 by sliding A inthe direction shown by the arrow.

2

1

3

2

4

35

1

1

S1

When assembling Key No. 5 use the tensionspring (QY9-0039-000). Remove the spring afterfasten the screw.

When removing the carriage unit,1 lift up the lever,2 holding down the stay,3 pull out the carriage unit.

FIGURE 7 See PageB - 13

FIGURE 8See Page

B - 15

See PageB - 11

CARRIAGE UNITFIGURE 6

See PageB - 9

WASTE INK ABSORBERFIGURE 5

A-2

LOGIC BOARD COMPONENTPICK-UP ROLLER

PLATEN UNIT

U1

25

2

53

10

4

10

51

56

15

7

20

8

U11

J3 1

4

U9

F2

ZD2ZD1

QH

1-9

002-0

1Q

G8-8

002

U5

C7

6

F1

PS

1

PS

2

D1

2D

10

D11

D9

D8

D7

2

31

J6

32

Q2

2

EB

C7

7

J7

2

J1

31

32

1

EB

Q2

3

J2

4131

D1

8D

17

D1

6D

15

D1

4D

13

S2

RE

SE

T

BZ

1

DA

YSC

E-4

T

U2

PS

3

C62

D3

D4

D5

D6

J5

X1

1

S1

PO

WE

RC71

J4

18

1

19

18

36

01

23

45

67

89

01

23

45

67

89

IND

X

R

1

FN

CK

1

4

5

4

6

7

2

1

3

If these screws areloosened, the headgap adjustment will berequired.

S4

S4

When assembling or disassembling Key No. 2,its gear should not catch the edge of the chassis.

2

1

3

3

5

54

FIGURE 11See Page

B - 21FIGURE 12

See PageB - 23

FIGURE 9SPUR & WIPER UNIT See Page

B - 17FIGURE 10 See Page

B - 19

A-3

R40 R39

R131

Q10

Q27

GN

D VH

Q9 Q8

C46

R60

R16R134

R32FB55R81R140FB54R149R148R141R146R145R91R142R139

C6

1

R24

R21

TP

56

R132

R133

R33

C70C49

FB52R79R137

FB51R159R157

R136R155R154R90

R152R138

Q14R98R122R101R104R100

TP

4

TP

33

R118

R11

2

R114R120

R115

R7

R110R108R106

U1

4U

15

R96

Q1

5Q

18

R52 C14

R41

R63

R66R20

C68

R62R65R19

C67

R93R92

C36C15

R58C10

R5

7R

55

R5

6R

53

C11

R119R113R116R121R117R126R111R109R107

R4

2

C3

7

R97

Q19

TP

57

Q25

Q26 Q24

R99R123R103

R1

05

R1

02R26

Q1

3R

12

4

R61C39R144R147R143FB56R150R78R82R130R37R36R127

R153R156R151FB53R158R75R80R129R35R34R128

R94

R28R74R77R31R27R73R76R30

R29

Q3

Q2

LE

D1

R1

25

LED2

LED3

Q1

7

Q11

R71C7C52C53C54R38

U3

C51

TP

7

C5 C40

R5

C4

R43

C16

TH1

U1

0

TP

27

TP

30

TP

50

12

34

56

78

90

12

34

56

78

9

98 A

M

FB7FB8

FB9FB10FB11FB12FB13FB14FB58FB59FB60FB23FB24FB25

FB26FB28

TP

15

TP

14

TP

13

TP

16

TP

17

C17FB22FB21FB20FB19FB18FB17FB16

FB57FB4FB31FB30FB29

FB27C47

FB

15

R45 C64

C2

2

R51C66C65R50

C12R54

R4

R47

R44 C63

C48ZD3

ZD12

GN

D

VC

CG

ND VM

GN

D

R72

C13

R64

R67R25C69

FB

32

FB

50

FB

49

FB

48

FB

46

FB

47

FB

45

FB

44

FB

33

FB

37

FB

36

FB

38

FB

39

FB

42

FB

43

FB

40

FB

41

R189

R170 FB34 FB35

R83 TP

32Q

4Q

7

R8

6

R8

7

TP

34

D2 R

88T

P25

TP

26

TP

22

TP

23

R166

R160

R163

R164

R162

R165

R161

R169

R6

R174

R8

5R

173

R172

R167

R190

R8

4R

168

R171

C7

3R

188

C7

5C

74

R187

R186

R184

R185

C7

2

R183

R182

R181

R180

R179

R178

R177

R176

R175

TP

21

TP

20

TP

12

TP

2

C5

6

C5

5

U6

TP

3

R1

2

TP

31

TP

11

C45

R1

C2

4C

23

R1

4R

15

C2

0C

6

R1

7

R11

C43

C2

1

TP

10

TP

19TP

18

C27

C2

5

R13R10

C42

R89

R49

R46

R48

FB1

FB3

TP

58

12

34

56

78

9X

YZ

R3

8

R95

C86

R8

R69R68

R191

R70

R23R22

C78

TP

6

C19

C44

FB61

FB62

TP

8T

P9

C18

R9

C9

C28 R59

Q6

C26

C8

3

C8

C8

7

C79C80C81C82

C84

C8

5

Top View Bottom View

T3

T1

T2

QY9-0038

1.9mm

See PageD - 1

TOOLFIGURE 13

A-4

B-1

11

12

10

1

3

2

9

4

5

6

7

8

TRAY & AC ADAPTERFIGURE 1

B. PARTS LAYOUT & PARTS LIST

FIGURE R

Q

& PARTNUMBER ; T DESCRIPTION REMARKS KEY NO.

K Y

I- 1 QG8-0002-000 1 OUTPUT TRAY UNIT

2. QA8-0066-000 1 GUIDE, PAPER FOR BJC-5000

3 QH3-9001-000 1 AC ADAPTER: 120V 60HZ

QH3-9002-000 1 AC ADAPTER: 120V 60HZ FOR BJC-5000

QH3-9006-000 1 AC ADAPTER: IOOV 50/60HZ

4 QH3-9004-000 1 AC ADAPTER: 220-240V 50HZ

5 vvT3-5069-000 1 CORD, POWER 22OV-240V

6 WT3-506i -000 1 CORD, POWER 22OV-240V (UK)

7 WI-3-5060-000 1 CORD, POWER 22OV-240V (AUS)

8 WT3-5084-000 1 CORD, POWER 250V(CHN)

9 NPN 1 BLACK BJ CARTRIDGE PACK CONSUMABLES

IO NPN 1 COLOR BJ CARTRIDGE PACK CONSUMABLES

11 NPN 1 PHOTO BJ CARTRIDGE PACK CONSUMABLES

12 NPN 1 BJ CARTRIDGE CONTAINER OPTION

B-2

FIGURE 2 ‘OVER I

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ,

, *

I 4

I 8

: I ,

I

:

I I

,

8 1

I :

, I

, ,

I I :

I , I

8 I

9

I

I

I

8 :

:

I I

I

I

L

I

4

I .

8 8

:

I

I

I ,

8 :

I I ,

.

I I ,

,

I

I *

1

6

1 Unlatch two claws on the left and the front claw !

f

4 on the right first. Then, press the part shown by j 1 the arrow to remove Key No. 7. 4 I 4 a I , I ;

, 1

I

. :

: I

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - .

B-3

FIGURE R

Q

& PARTNUMBER ; T DESCRIPTION REMARKS

KEY NO. K

Y

2- 1 QF8-0001-000 1 FRONT COVER ASS’Y FOR BJC-5000

QF8-0001-010 1 FRONT COVER ASS’Y FOR BJC-5100

2 QA8-0001-000 1 COVER, CONNECTOR FOR BJC-5000

QA8-0085000 1 COVER, CONNECTOR FOR BJC-5100

3 QA8-0014-000 1 BUTTON, PUSH FOR BJC-5000

QA8-9013-000 1 BUTTON, PUSH FOR BJC-5100

4 QA8-0015-000 1 BAR, BUTTON

5 QA8-0067-000 1 CAP, INDICATOR

6 QA8-0013-000 1 GUIDE, INDICATOR

7 QF8-0002-000 1 UPPER COVER ASS’Y FOR BJC-5000

QF8-0015-000 1 UPPER COVER ASS’Y FOR BJC-5100

8 QA8-0017-000 1 PLATE, PRODUCT NAME FOR BJC-5000

QA8-0118-000 1 PLATE, MODEL NAME FOR BJC;SlOO

9 QA8-0004-000 - 1 LABEL FOR BJC-5000

IO QA8-0073-000 1 LABEL, INK TANK REPLACE FOR BJ&5000

*

.

B-4

B-5

2

1

S1

FIGURE 3SHEET FEEDER UNIT

FIGURE R

Q & PARTNUMBER ; T DESCRIPTION REMARKS

KEY NO. K Y

3- 1 QBI -2494-000 1 HOLDER, SHEET FEEDER

2 QG8-0015-000 1 SHEET FEEDER UNIT FOR BJC-!$I00

QG8-9003-000 1 SHEET FEEDER UNIT FOR BJC-5100

B-7

3

4

2

1

S3

S3

S1

S2

5

FIGURE 4LOGIC BOARD & BOTTOM CASE

FIGURE R

Q

& DESCRIPTION REMARKS KEY NO.,

PARTNUMBER ; T

K Y

49 1 QHZ-9002-000 1 CABLE, POWER SUPPLY FOR USA/CANADA

QH2-9003-000 1 CABLE, POWER’SUPPLY FOR OTHER

2 QG8-8002-020 1 LOGIC BOARD ASS’Y FOR BJC-5000

QG8-801 I-000 1 LOGIC BOARD ASS’Y FOR BJC-5100

3 QA8-0025-000 1 ARM, COVER SENSOR

4 QA8-0077-000 2 CLAMP, CABLE

’ 5 QG8-0001-000 1 BOTTOM CASE UNIT FOR BJC-5000

QG8-0023-000 1 BOTTOM CASE UNIT FOR BJC-5100

,

B-8

B-9

1

2

FIGURE 5WASTE INK ABSORBER

FIGURE . R

Q & PARTNUMBER ; T DESCRIPTION REMARKS

KEY NO. K

Y

5- 1 QA8-0007-000 1 ABSORBER, INK FOR BJC-5000

QA8-0007-010 I ABSORBER, INK FOR BJC-5100

2 QA8-0079-000 I ABSORBER, SUB INK

.

B-IO

FIGURE 6 CARRIAGE UNIT

I

r___________________--- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ,

I

j When assembling Key No. 5 use the tension I [

i spring (QY9-0039-000). Remove the spring after i

i 8 fasten the screw.

I 1 , I I I : I : I I : I : I , , 4 * #’ 1 I’

@ holding down the stay, @ pull out the carriage unit.

B-l 1

\

FIGURE R

Q

& PARTNUMBER ; T DESCRIPTION REMARKS

KEY NO. K

Y

6- 1 QBI-2415-000 1 CLIP, SHAFT

l-1 QA8-0125-000 1 CLIP, SHAFT(L) FOR BJC-5100

QBI -2415-000 1 CLIP, SHAFT FOR BJC-5000

2 QA8-0019-000 N 1 SHAFT, CARRIAGE FOR BJC-5000

QA8-0126-000 N 1 SHAFT, CARRIAGE FOR BJC-5100

3 QA8-0018-000 1 HOLDER, CABLE

4 QG8-0008-000 1 CARRIAGE UNIT FOR BJC-5000

QG8-9002-000 1 CARRIAGE UNIT FOR BJC-5100

5 QF8-0003-000 1 IDLER PULLEY ASS’Y

6 QA8-0123-000 I SPACER, PLASTIC FOR BJC-5100

7 QA8-0048-000 I HOLDER, BELT

8 QA8-0046-000 1 BELT, CARRIAGE

._

B-12

2

\ /=

BJC-5000

BJC-5100

B-l 3

FIGURE R

Q

& PARTNUMBER fi T DESCRIPTION REMARKS KEY NO.

K Y

7- 1 QG8-0027-000 1 FEED MOTOR UNIT FOR BJC-5100

QH4-9003-000 1 MOTOR, PAPER FEED FOR BJC-5000

2 QH4-9001-000 1 ‘MOTOR, CARRIAGE FOR BJC-5000

QH4-9007-000 1 MOTOR, CARRIAGE FOR BJC-5100

3 QBI-2441-000 3 DAMPER FOR BJC-5100

. 4 QBI -2442-000 3 SLEEVE, SCREW FOR BJC-5100

B-14

B-15

A

1

2

3 4

5

S1

S1

S3

When assembling or disassembling Key No. 5,its edge should not catch the gear.

Remove Key No. 5 by sliding A inthe direction shown by the arrow.

FIGURE 8PURGE UNIT & STAY UNIT

FIGURE R

Q

& DESCRIPTION REMARKS KEY NO.

PARTNUMBER ; T

K Y

b 1 QG8-001 l-000 1 PURGE UNIT FOR BJC-5000

. QG8-001 I-010 1 PURGE UNIT FOR BJC-5100

2 QH2-9001-000 1 PG SENSOR CABLE ASS’Y

3 QS5-2045-000 1 SPRING, HOOK END COIL

4 QA8-0088-000 1 LEVER, SENSOR

5 QG8-0005-000 1 STAY UNIT FOR BJC-5000

QG8-9001-000 1 STAY UNIT FOR BJC-5100 .

B-16

B-17

2

1

3

3

5

54

FIGURE 9SPUR & WIPER UNIT

FIGURE R Q

& PARTNUMBER ; T DESCRIPTION REMARKS

KEY NO. K Y

9- 1 QA8-8514-000 1 SPRING, HOOK END COIL

2 QG8-0007-000 2 WIPER UNIT

3 QA8-0068-000 8 SPUR

4 QA8-8513-000 4 SHAFT, SPRING

5 QBI -0841-000 8’ SPUR

B-18

B-19

4

5

4

6

7

2

1

3

If these screws areloosened, the headgap adjustment will berequired.

S4

S4

When assembling or disassembling Key No. 2,its gear should not catch the edge of the chassis.

FIGURE 10PLATEN UNIT

FIGURE R

Q & DESCRIPTION REMARKS

KEY NO.

PARTNUMBER ; T

K Y

IO- 1 QA8-8001-000 1 GEAR, SLOW DOWN

2 QG8-001 o-000 1 PLATEN UNIT FOR BJC-5000

QG8-0022-000 1 PLATEN UNIT FOR BJC-5100

3 . QS5-0040-000 1 GEAR, TRANSMISSION

4 QS5-2046-000 2 SPRING, HOOK END COIL *

5 QBI -2406-020 1 HOLDER, SHAFT

6 QA8-0022-000 1 HOLDER, SHAFT

7 QA8-0020-000 N 1 FRAME, CARRIAGE GUIDE

B-20

B-21

1

FIGURE 11PICK-UP ROLLER

B-22

FIGURE &KEY NO.

PART NUMBER

RANK

QTY

DESCRIPTION REMARKS

11 - 1 QG5-0828-020 1 PICK-UP ROLLER UNIT

B-23

FIGURE 12LOGIC BOARD COMPONENT

U1

25

2

53

10

4

10

51

56

15

7

20

8

U11

J3 1

4

U9

F2

ZD2ZD1

QH

1-9

00

2-0

1Q

G8

-80

02

U5

C7

6

F1

PS

1

PS

2

D1

2D

10

D11

D9

D8

D7

2

31

J6

32

Q2

2

EB

C7

7

J7

2

J1

31

32

1

EB

Q2

3

J2

4131

D1

8D

17

D1

6D

15

D1

4D

13

S2

RE

SE

T

BZ

1

DA

YSC

E-4

T

U2

PS

3

C62

D3

D4

D5

D6

J5

X1

1

S1

PO

WE

R

C71

J4

18

1

19

18

36

01

23

45

67

89

01

23

45

67

89

IND

X

R

1

FN

CK

Top View

B-24

R40 R39

R131

Q10

Q27

GN

D VH

Q9 Q8

C46

R60

R16R134

R32FB55R81R140FB54R149R148R141R146R145R91R142R139

C6

1

R24

R21

TP

56

R132

R133

R33

C70C49

FB52R79R137

FB51R159R157

R136R155R154R90

R152R138

Q14R98R122R101R104R100

TP

4

TP

33

R118

R11

2

R114R120

R115

R7

R110R108R106

U1

4U

15

R96

Q1

5Q

18

R52 C14

R41

R63

R66R20

C68

R62R65R19

C67

R93R92

C36C15

R58C10

R5

7R

55

R5

6R

53

C11

R119R113R116R121R117R126R111R109R107

R4

2

C3

7

R97

Q19

TP

57

Q25

Q26 Q24

R99R123R103

R1

05

R1

02R26

Q1

3R

12

4

R61C39R144R147R143FB56R150R78R82R130R37R36R127

R153R156R151FB53R158R75R80R129R35R34R128

R94

R28R74R77R31R27R73R76R30

R29

Q3

Q2

LE

D1

R1

25

LED2

LED3

Q1

7

Q11

R71C7C52C53C54R38

U3

C51

TP

7

C5 C40

R5

C4

R43

C16

TH1

U1

0

TP

27

TP

30

TP

50

12

34

56

78

90

12

34

56

78

9

98 A

M

FB7FB8

FB9FB10FB11FB12FB13FB14FB58FB59FB60FB23FB24FB25

FB26FB28

TP

15

TP

14

TP

13

TP

16

TP

17

C17FB22FB21FB20FB19FB18FB17FB16

FB57FB4FB31FB30FB29

FB27C47

FB

15

R45 C64

C2

2

R51C66C65R50

C12R54

R4

R47

R44 C63

C48ZD3

ZD12

GN

D

VC

CG

ND VM

GN

D

R72

C13

R64

R67R25C69

FB

32

FB

50

FB

49

FB

48

FB

46

FB

47

FB

45

FB

44

FB

33

FB

37

FB

36

FB

38

FB

39

FB

42

FB

43

FB

40

FB

41

R189

R170 FB34 FB35

R83 TP

32Q

4Q

7

R8

6

R8

7

TP

34

D2 R

88T

P25

TP

26

TP

22

TP

23

R166

R160

R163

R164

R162

R165

R161

R169

R6

R174

R8

5R

173

R172

R167

R190

R8

4R

168

R171

C7

3R

188

C7

5C

74

R187

R186

R184

R185

C7

2

R183

R182

R181

R180

R179

R178

R177

R176

R175

TP

21

TP

20

TP

12

TP

2

C5

6

C5

5

U6

TP

3

R1

2

TP

31

TP

11

C45

R1

C2

4C

23

R1

4R

15

C2

0C

6

R1

7

R11

C43

C2

1

TP

10

TP

19TP

18

C27

C2

5

R13R10

C42

R89

R49

R46

R48

FB1

FB3

TP

58

12

34

56

78

9X

YZ

R3

8

R95

C86

R8

R69R68

R191

R70

R23R22

C78

TP

6

C19

C44

FB61

FB62

TP

8T

P9

C18

R9

C9

C28 R59

Q6

C26

C8

3

C8

C8

7

C79C80C81C82

C84

C8

5

Bottom View

FIGURE R Q

& PARTNUMBER ; T DESCRIPTION REMARKS KEY NO.

K Y

129 BZ 1 WRI -5057-000 N 1 BEEPER: PKMI 3EPY-4000-TFOI

Fl WDI -0274-000 1 FUSE, 5OV IA FOR BJC-5000

WD I-0275-000 1 IC, PROTECT OR: ICP-N38 FOR BJC-5100

F? WD I-0274-000 1 FUSE, 5OV IA FOR BJC-5000

LED 1 WG I-5239-000 N 1 LED: SEC2552C GREEN

LED 2 QH7-8061-000 1 LED: AYI 102W-331 YELLOW

LED 3 QH7-8061-000 1 LED: AY1102W-331 YELLOW

PS 1 WG8-5357-000 N 1 IC, EE-SXI 128, PHOTO INTERRUPTER

PS 2 WG8-5255-000 N 1 IC, TLP832, PHOTO INTERRUPTER .

PS 3 WG8-5255-000 N 1 IC, TLP832, PHOTO INTERRUPTER

Sl wc~-5329-000 N 1 SWITCH, PUSH: KSH0636AT

s2 wcz-5329-ooo N 1 SWITCH, PUSH: KSH0636AT

TH 1 W P2-5080-000 N 1 THERMISTOR: NTCCM20124AG473HC

u2 QH8-9004-030 1 IC, UPD23C8000XCZ-196, MASKED-ROM FOR BJC-5000

QH8-9009-000 1 IC, UPD23C8000XCZ-220, MASKED-ROM FOR BJC-5100

WA90531 9-000 N 1 SOCKET, IC, 42P

u3 WA3-6298-000 N 1 IC, HD74HC4053FP, C-MOS

u5 WA4-6641-000 1 IC, L6219DS, DRIVER FOR BJC-5000

WA4-7049-000 N 1 IC, MTD2007F, MOTOR DRIVER FOR BJC-5100

U’6 WA3-6426-000 N 1 IC, PST592EMT

u9 WA4-6641-000 I IC, L6219DS, DRIVER FOR BJC-5000

WA4-7049-000 N 1 IC, MTD2007F, MOTOR DRIVER FOR BJC-5100

u IO WA3-8448-000 I IC, AT93C46R-1 OSC, EEP-ROM

Ull WA3-6255-000 N 1 IC, UPD424260LE-70, DRAM FOR BJC-5100

WA7-0253-000 N 1 IC, MSM5142606-70, DRAM FOR BJC-5000

u12 QH8-9002-000 1 IC, MPU & PRINTER CONTROLLER

u14 WA4-5086-000 N 1 IC, HA17324FEL, OP AMP FOR BJC-5000

WA4-6376-000 N 1 IC, BAI0324AF, OPE AMP FOR BJC-5100

u 15 WA4-5086-000 N 1 IC, HA17324FEL, OP AMP FOR BJC-5000

WA4-6376-000 N 1 IC, BAl0324AF, OPE AMP FOR BJC-5100

Xl WK2-5628-000 N 1 OSCILLATOR, CERAMIC: 25.OMHZ

B-25

B-26

This pa ge intentionall y left b lank

SCREW

FIGURE R Q &

KEY NO. PARTNUMBER ; T DESCRIPTION REMARKS

K Y

s- 1 XB6-7300-607 SCREW, TP: M3 x 6 MM

2 XBI -2301-207 SCREW, M3x12

3 XB4-7401-009 SCREW,TAP BINDING HEAD M4xlO

4 XA9-0693-000 SCREW, TP, M3x4

5 XB6-7300-807 SCREW, MACHINE, WASHER HEAD, M3x8

,

C-l

C-2

This pa ge intentionall y left b lank

T3

T1

T2

QY9-0038

1.9mm

D-1

FIGURE 13TOOL

D. TOOL

D-2

FIGURE &KEY NO.

PART NUMBER

RANK

QTY

DESCRIPTION REMARKS

T - 1 CK-0562-000 1 GREASE, MOLYKOTE PG-641

2 QY9-0038-000 1 GUAGE, GAP: 1.9MM

3 QY9-0039-000 1 SPRING, TENSION

PART FIGURE & PART FIGURE & NUMBER KEY NO.

DESCRIPTION NUMBER KEY NO.

CK-0562-000 T- 1 GREASE, MOLYKOTE PG-641

QA8-0001-000 2 - 2 COVER, CONNECTOR

QA8-0004-000 2 - 9 LABEL

QA8-0007-000 5 - 1 ABSORBER, INK

QA8-0007-010 5 - 1 ABSORBER, INK

QA8-0013-000 2 - 6 GUIDE, INDICATOR

QA8-0014-000 2 - 3 BUTTON, PUSH

QA8-0015000 2- 4 BAR, BUTTON

QA8-0017-000 2 - 8 PLATE, PRODUCT NAME

QA8-0018-000 6 - 3 HOLDER, CABLE

QA8-0019-000 6 - 2 SHAFT, CARRIAGE

QA8-0020-000 10 - 7 FRAME, CARRIAGE GUIDE

QA8-0022-000 10 - 6 HOLDER, SHAm

QA8-0025-000 4- 3 ARM, COVER SENSOR

QA8-0046-000 6 - 8 BELT, CARRIAGE

QA8-0048-000 6 - 7 HOLDER, BELT

QA8-0066-000 1 - 2 GUIDE, PAPER

QA8-0067-000 2 - 5 CAP, INDICATOR

QA8-0068-000 9 - 3 SPUR

QA8-0073-000 2 - 10 LABEL, INK TANK REPLACE

QA8-0077-000 4 - 4 CLAMP, CABLE

QA&0079-000 5- 2 ABSORBER, SUB INK

QA8-0085-000 2 - 2 COVER, CONNECTOR

QA8-0088-000 8 - 4 LEVER, SENSOR

QA8-0118-000 2 - 8 PLATE, MODEL NAME

QA8-0123-000 16 - 6 SPACER, PLASTIC

QA8-0125-000 6 - 1 - 1 CLIP, SHAFT(L)

QA8-0126-000 6 - 2 SHAFT, CARRIAGE

QA8-8001-000 10 - 1 GEAR, SLOW DOWN

QA8-8513-000 9 - 4 SHAFT, SPRING

QA8-8514-000 9 - 1 SPRING, HOOK END COIL

QA8-9013-000 2 - 3 BUTTON, PUSH

QBl-0841-000 9- 5 SPUR

QBl-2406-020 10 - 5 HOLDER, SHAFT

QBl-2415-000 6- 1 CLIP, SHAFT

6- l-l

QBl-2441-000 7 - 3 DAMPER

QBl-2442-000 7 - 4 SLEEVE, SCREW

QBl-2494-000 3 - 1 HOLDER, SHEET FEEDER

QF8-0001-000 2 - 1 FRONT COVER ASSY

QF8-0001-010 2- 1 FRONT COVER ASSY

QF8-0002-000 2- 7 UPPER COVER ASS’Y

QF8-0003-000 6 - 5 IDLER PULLEY ASS’Y

QF8-0015-000 2 - 7 UPPER COVER ASSY

QG5-0828-020 11 - 1 PICK-UP ROLLER UNIT

QG8-0001-000 4 - 5 BOTTOM CASE UNIT

QG8-0002-000 1 - 1 OUTPUT TRAY UNIT

QG8-0005000 8 - 5 STAY UNIT

QG8-0007-000 9- 2 WIPER UNIT

QG8-0008-000 6 - 4 CARRIAGE UNIT

QG8-0010-000 lo- 2 PLATEN UNIT

QG8-001 l-000 8 - 1 PURGE UNIT

QG8-0011-010 8- 1 PURGE UNIT

QG8-0015-000 3 - 2 SHEET FEEDER UNIT

QG8-0022-000 10 - 2 PLATEN UNIT

QG8-0023-000 4 - 5 BOTTOM CASE UNIT

QG8-0027400 7- 1 FEED MOTOR UNIT

QG8-8002-020 4- 2 LOGIC BOARD ASS’Y

QG8-801 l-000 4 - 2

Q$8-9001-000 8 - 5

QG8-9002-000 6 - 4

QG8-9003-000 3 - 2

QH2-9001-000 8 - 2

QH2-9002-000 4 - 1

QH2-9003-000 4 - 1

QH3-9001-000 1 - 3

QH3-9002-000. 1 - 3

QH3-9004-000 1 - 4

QH3-9006-000 1 - 3

QH4-9001-000 7 - 2

QH4-9003-000 7- 1

QH4-9007-000 7 - 2

QH7-8061-000 12- LED 2

12- LED 3

QH8-9002-000 12- u12

QH8-9004-030 12- u2

QH8-9009-600 12- u2

QS5-0040-000 10 - 3

QS5-2045-000 8 - 3

- QS5-2046-000 10 - 4

QY9-0038-000 T- 2

QY9-0039-000 T- 3

WA3-6255-000 12- Ull

WA3-6298-000 12 - U 3

WA3-6426-000 12- U6

WA3-8448-000 12- UlO

WA4-5086-000 12 - U 14

12- u15

WA4-6376-000 12 - U 14

12- u15

WA4-6641-000 12 - U 5

12- u9

WA4-7049-000 12 - U 5

12- u9

WA7-0253-000 12 - U 11

WA9-5319-000 12 - U 2

WC2-5329400 12 - S 1

12- s2

WD1-0274-000 12 - F 1

12- F2

WDl-0275-000 12 - F 1

WGl-5239-000 12 - LED 1

WG8-5255-000 12 - PS 2

12- PS3

WG&5357-000 12 - PS 1

WK2-5628-000 12 - X 1

WP2-5080-000 12 - TH 1

WRl-5057-000 12 - BZ 1

‘M-3-5060-000 1 - 7

Wr3-5061-000 1 - 6

wT3-5069400 1 - 5

m3-5084-000 1 - 8

XA9-0693600 S - 4

XBl-2301-207 S - 2

xB4-7401-009 s - 3

XB6-7300-607 S - 1

LOGIC BOARD ASS’Y

STAY UNIT

CARRIAGE UNIT

SHEET FEEDER UNIT

PG SENSOR CAB& ASSY

CABLE, POWER SUPPLY

CABLE, POWER SUPPLY

AC ADAPTER: 120V 60HZ

AC ADAPTER: 120V 60HZ

AC ADAPTER: 220-240V 50HZ

AC ADAPTER: 1OOV 50160HZ

MOTOR, CARRIAGE

MOTOR, PAPER FEED

MOTOR, CARRIAGE

LED: AY 1102W-331 YELLOW

IC, MPU & PRINTER CONTROLLER

IC, UPD23C8000XCZ-196, MASKED-ROM

IC, UPD23C8OOOXCZ-220, MASKED-ROM

GEAR, TRANSMISSION

SPRING, HOOK END COIL

SPRING, HOOK END COIL

GUAGE, GAP: 1.9MM

SPRING, TENSION

IC, UPD424260LE-70, DRAM

IC, HD74HC4053FP, C-MOS

IC, PST592EMT

IC, AT93C46R-lOSC, EEP-ROM

IC, HA17324FEL, OP AMP

IC, BA10324AF, OPE AMP

IC, L6219DS, DRIVER

IC, MTD2007F, MOTOR DRIVER

IC, MSM51426OC-70, DRAM

SOCKET, IC, 42P

SWITCH, PUSH: KSH0636AT

FUSE, 50V 1A

IC, PROTECT OR: ICP-N38

LED: SEC2552C GREEN

IC, TLP832, PHOTO INTERRUPTER

IC, EE-SX1128, PHOTO INTERRUPTER

OSCILLATOR, CERAMIC: 25.OMHZ

THERMISTOR: NTCCM20124AG473HC

BEEPER: PKM13EPY-4000-TFOl

CORD, POWER

CORD, POWER

CORD, POWER

CORD, POWER

SCREW, TP, M3x4

SCREW, M3x12

SCREW,TAP BINDING HEAD M4xlO

SCREW, TP: M3 x 6 MM

DESCRIPTION

E-l

PART FIGURE & NUMBER KEY NO.

.DESCRIPTION

X86-7300-807 S - 5 SCREW, MACHINE, WASHER HEAD, M3x8

E-2

PRINTED IN JAPAN (IMPRIME AU JAPON) CANON INC.

The printing paper contains70% waste paper.