BPK RNR Web Catalog 2014
-
Upload
derek-taylor -
Category
Documents
-
view
219 -
download
1
description
Transcript of BPK RNR Web Catalog 2014
The B
enchmark o
f Quality
®
© 2
011
Ben
dP
ak, I
nc. •
Ben
dP
ak, I
nc. i
s a
reg
iste
red
tra
dem
ark.
This is my BendPak
SCAN TO WATCH THE VIDEO NOW
There are many, but this one’s mine.“If you’re going to put your wheels through hell, be sure you’ve got the rock-solid muscle to bring them back to life. BendPak lifts are built as ruthless as the road itself. Never compromise.”
– Bill Goldberg, Professional Athlete & TV Host @Goldberg
Table of Contents
Tel: 1-805-933-9970 · Fax: 1-805-933-9160 · www.bendpak.com
BendPak / Ranger
Medium-Duty Clear Floor LiftsMedium-Heavy Floor Plate LiftsHeavy-Duty Clear Floor Lifts4-Post Light-Duty Lifts & Accessories4-Post Light-Duty Lifts4-Post Heavy-Duty LiftsAlignment LiftsThis is my BendPakImage GalleryQuatra Scissors Low-Rise & Mid-Rise LiftsParking & StorageRolling Bridge JacksPortable Column LiftPipe BendersAir CompressorsPower UnitsQuickJack Tire ChangersTire Repair / Brake LathesWheel Balancers / Wheel Aligner Floor Jacks / Transmission JacksJacks Stands Motorcycle LiftsTool StorageWork BenchesCarts & Dollies / Shop PressesHose ReelsOil Drains / Oil Filter CrushersParts WasherWheel Balancer / Rolling Creeper / Work Seat / Tire ChangersEngine Support / Engine Stand / Shop CraneManufacturing Superiority
4-56-78-9
10-1112-1314-1516-17
1819
20-2122-2324-25
2627
28-2930-31
3233
34-353637
38-3940414243444546474849
50-51
GENERAL DISCLAIMER
BENDPAK/RANGER warrants to the original purchaser only that all products shown in this catalog conform to BENDPAK/RANGER published
specifications and are free from defects in material or workmanship. In no event will BENDPAK/RANGER be liable to you or to anyone else for any
decision made or action taken by you or anyone else in reliance on information obtained from this catalog. BENDPAK/RANGER has exclusive title
and ownership rights, including all intellectual property right, throughout the world in all material and content contained on these pages. Materials,
design, specifications, images and other content within this catalog are subject to change. BENDPAK/RANGER does not take responsibility for improper
use or any results thereof. BENDPAK/RANGER products are provided and sold as is without any express or implied warranties including warranties of
merchantability or fitness for particular purpose. In no event will BENDPAK/RANGER be liable for any special, incidental, or consequential damages based
on breach of warranty, breach of contract, negligence, strict tort, or any other legal theory. Damages that BENDPAK/RANGER will not be responsible for
include, but are not limited to: loss of profits; loss of savings or revenue; loss of use of the product or any associated equipment; cost of capital; cost of
any substitute equipment, facilities, or services; downtime; the claims of third parties, including customers; and injury to property. This limitation does not
apply to damages caused by breach of the warranty of title and against infringements or to claims for personal injury. Unless modified in a writing signed
by both parties, it is understood that BENDPAK/RANGER published warranties are to be the complete and exclusive agreement between the parties.
For complete and full warranty details contact BENDPAK/RANGER at 1-805-933-9970 or visit www.bendpak.com
Equ
ipm
ent m
odel
s sh
own
in th
is c
atal
og m
ay b
e av
aila
ble
in d
iffer
ent v
olta
ges
upon
requ
est.
Medium-Duty Clear FloorXPR Series Features & Specifications
•Wideornarrowconfiguration•Exclusive“Tru-Metric”arms•Single-pointsafetyrelease•Dual“Direct-Drive”cylinders•Electric/hydraulicpower•17”x19”A36steelbaseplate•UHMWpolyethylenebearings
•Dual3”-spacedsafetylocks•Automaticarmrestraints•Heavy-dutyaircraftcable•Oversizedsheavediameter•Paddedsafety-shutoffbar•8-piecetruckandvanadapters•Triple-telescoping/low-proarms
•Contactpads•Stackableadapters•Singlepiececolumns•Optionalfootguards•Accommodatesawidevariety ofvehiclesassemblies•Safetylocksineachcolumn
XPR-7TRTurf Lift
XPR-10-LPClear Floor Low-Pro Arms
Lifting Capacity - 7,000 lbs. Max. Lift Height - 73”
Width - 145” / Height - 145”
XPR-10Clear Floor
Lifting Capacity - 10,000 lbs.Max. Lift Height - 73”
Width - 132” or 145” / Height - 145”
Lifting Capacity - 10,000 lbs.Max. Lift Height - 73”
Width - 132” or 145” / Height - 145”
Lifting Capacity - 10,000 lbs.Max. Lift Height - 73”
Width - 132” or 145” / Height - 145”
SERIES FEATURES:
XPR-10-168Clear Floor Extended Height
XPR-10A-168Asymmetric Extended Height
Features bolt-on top extension for added
24” clearance
2-stage low-profile armsfeatured on LP lift models
4 For full product details and specifications, please visit www.bendpak.com
XPR-10A-LPAsymmetric
Low-Pro Arms
XPR-10AAsymmetric
Lifting Capacity - 10,000 lbs.Max. Lift Height - 73”
Width - 132” or 145” / Height - 145”
XPR-10-LPXPR-10A-LPFeature low-profile arms
Steel Lift PadsTuf-Pads Offset Adapters Air / Electric Work StationFrame Cradle Pads
• Heavy-duty 1/2” aircraft quality equalizer cables
• Safety locks every 3”
ACCESSORIES:
Adjustable WidthCan be installed in either wide or narrow configurations
Dual hydraulic direct-drive cylinders
Padded overhead safety shutoff bar
Oversized cable sheave diameter reduces cable fatigue
Single point safety release
Automatic arm restraints
Triple-telescoping arm design
Versatile drop-in contact pads
UHMW polyethylene bearing system
XPR-10AShown with air / electric work station and foot guards
FREE truck and van adapters come standard with all BendPak 2-post lifts
51645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Medium-Heavy Floor PlateXPR Series Features & Specifications
XPR-7TRFXFloor Plate Turf Lift
Lifting Capacity - 7,000 lbs.Max. Lift Height - 73”
Width - 145” / Height - 145”
XPR-9DDirect-Drive Floor Plate
Lifting Capacity - 9,000 lbs.Max. Lift Height - 73”
Width - 132” or 145” / Height - 145”
XPR-12FDHeavy-Duty Floor Plate
Lifting Capacity - 12,000 lbs.Max. Lift Height - 74”
Width - 155” / Height - 144”
•Adjustablewidthdesign•Dualhydraulicliftingcylinders•Single-piececolumns•Singlepointsafetyrelease•Drop-endarmsprovide alowerpadheight•Triple-telescopingarms
•Electric/hydraulicsystem•Self-lubricatingdura-glideUHMW polyethylenebearingsystem•Dual3”-spacedsafetylocks•Automaticarmrestraints•Truckandvanadapters•Versatiledropincontactpads
•Adjustablewideornarrow drive-thruconfigurations•Durablepowdercoatfinish•Opentopdesign•Largesteelbaseplates•Heavy-duty3/8”equalizercables•Ruggedsteelconstruction
XPR-9Shorty Floor Plate
XPR-9-LPShorty Floor Plate
Lifting Capacity - 9,000 lbs.Max. Lift Height - 76”
Width - 132” or 145” / Height - 113”
Lifting Capacity - 9,000 lbs.Max. Lift Height - 76”
Width - 132” or 145” / Height - 113”
SERIES FEATURES:
Arms shown with optional foot guards
Frame cradle pads come standard
6 For full product details and specifications, please visit www.bendpak.com
2-stage low-profile armsfeatured on model: XPR-9-LP
Low profile floor plate
XPR-9DShown with air / electric work station and foot guards
Triple-telescoping arm design
Versatile drop-in contact pads
Dual hydraulic direct-drive cylinders
Single point safety release
Steel Lift PadsTuf-Pads Offset Adapters Air / Electric Work StationFrame Cradle Pads
Oversized cable sheave diameter reduces cable fatigue
• Heavy-duty dual 3/8” equalizer cables
• Safety locks every 3”
Automatic arm restraints
UHMW polyethylene bearing system
FREE truck and van adapters come standard with all BendPak 2-post lifts
71645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
ACCESSORIES:
Heavy-Duty Clear FloorXPR Series Features & Specifications
•Dual-synchroequalizationsystem•Electric/hydraulicpowersystem•UHMWpolyethylenebearings•Single-piececolumns•Dual“Direct-Drive”cylinders•Singlepointsafetyrelease•Automaticarmrestraints
•8-piecetruckandvanadapters•Oversizedcolumnbaseplates•Paddedsafety-shutoffbar•Safetylocksineachcolumn•Heavy-duty1/2”equalizercables•Powdercoatfinish•Rubberdoorbumpers
•Versatiledropincontactpadswith convenientstorage•Triple-telescopingarms/XPR-12C•Extendedheighttop-beamprovides greateroverheadclearance•Oversizedcablesheavediameter•Rubberliftpadswithstackableadapters
XPR-12C
Lifting Capacity - 12,000 lbs.Max. Lift Height - 74”
Width - 155” / Height - 170”
XPR-15C
Lifting Capacity - 15,000 lbs.Max. Lift Height - 74”
Width - 155” / Height - 170”
XPR-18C
Lifting Capacity - 18,000 lbs.Max. Lift Height - 74”
Width - 155” / Height - 170”
Frame cradle pads come standard Frame cradle pads come standard Frame cradle pads come standard
SERIES FEATURES:
8 For full product details and specifications, please visit www.bendpak.com
Frame Cradle PadsTuff-Pads Steel Lift Pads Air / Electric Work StationMobile High-Lift Jack Stand
XPR-15CShown with
optional equipment
• Heavy-duty 1/2”aircraft-quality equalizer cables
• Safety locks every 3”
Dual hydraulic direct-drive cylinders
Single point safety release
UHMW polyethylene bearing system
Padded overhead safety shutoff bar
Durable rubber lift pads
Automatic arm restraints
Oversized cable sheave diameter reduces cable fatigue
XPR-12C-192XPR-15C-192XPR-18C-192Features bolt on top extension for added 24” clearance
Adapter storage
Oversized A36 steel base platesFREE truck and van adapters come standard with all BendPak 2-post lifts
91645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
ACCESSORIES:
4-Post Light-Duty
HD-7500BLBoat Storage
Lifting Capacity - 7,500 lbs.Max. Lift - 70” / Runway Length - 164”
Width - 132” / Length - 200”
HD-7PXW Super Tall
HD-7PXN Super Tall
Lifting Capacity - 7,000 lbs.Max. Lift - 140” / Runway Length - 188”
Width - 110.25” / Length - 213”
Lifting Capacity - 7,000 lbs.Max. Lift - 140” / Runway Length - 188”
Width - 99.75” / Length - 213”
HD-7PNarrow
Lifting Capacity - 7,000 lbs.Max. Lift - 82” / Runway Length - 164”
Width - 99.75” / Length - 189”
SERIES FEATURES:
HD-7WWide
Lifting Capacity - 7,000 lbs.Max. Lift - 82” / Runway Length - 164”
Width - 110.25” / Length - 189”
•Runwaysfeaturenon-skidsurface•Singlehydrauliccylinderunderramp•Fullyenclosedliftingcables,safety locksandsheaves•Pneumaticpush-buttonsafetyrelease•Features1-1/4”sheaveaxles•Featuresheavy-duty3/8”aircraftcable
•Internal“anti-sway”sliderblocks ineachcolumn•Electric/hydraulicpowersystem•Oversizedsheavediameters•Rugged,self-lubricatingcablesheaves•Multi-positionsafetylocksincolumns•Dual-positionpowerunitlocations
•Redundantslack-cablesafetylatches•Fullyadjustablelocklevelingstops•Drivethroughrampsoptionavailable•36”approachrampsavailable•Durablepowdercoatfinish•Ruggedsteelconstruction•High-speedlifting
HD-7500BLXBoat Storage
Lifting Capacity - 7,500 lbs.Max. Lift - 140” / Runway Length - 188”
Width - 132” / Length - 224”
Lifting Capacity - 7,500 lbs.Max. Lift - 82” / Runway Length - 188”
Width - 132” / Length - 224”
HD-7500BL
HD Series Features & Specifications
10 For full product details and specifications, please visit www.bendpak.com
HD-7500PBXBoat Storage
Jack Platform
Options/AccessoriesACCESSORIES:
Aluminum Deck Drip TraysRJ-45 Rolling Bridge JackCaster Kit
4 Post Optional Accessories
111645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Caster KitFits HD-7 & HD-9 Series
JP-6 Jack Platform WSA-100Air Electric Work Station
Aluminum Approach Ramps Extended Aluminum Approach Ramps
Extended SteelApproach Ramps
Solid Aluminum Decks
RJ-45Rolling Bridge Jack
JP-3 Jack Platform
4-Post Light-DutyHD Series Features & Specifications
•Freestandingorbolt-downdesign•Runwaysfeaturenon-skidsurface•Singlehydrauliccylinderunderramp•Fullyenclosedliftingcables,safety locksandsheaves•Pneumaticpush-buttonsafetyrelease•Features1-1/4”sheaveaxles
•Internal“anti-sway”sliderblocks ineachcolumn•Featuresheavy-duty3/8”aircraftcable•Longerrampsforlowground clearancevehicles•Oversizedsheavediameters•Rugged,self-lubricatingcablesheaves
•Multi-positionsafetylocksincolumns•Dual-positionpowerunitlocations•Redundantslack-cablesafetylatches•Fullyadjustablelocklevelingstops•Drivethroughrampsoptionavailable•36”approachrampsavailable•Perfectforparking,storageandservice
HD-9STNarrow Standard
Lifting Capacity - 9,000 lbs.Max. Lift - 70” / Runway Length - 164”
Width - 99.75” / Length - 200”
HD-9STXNarrow Tall Long
Lifting Capacity - 9,000 lbs.Max. Lift - 82” / Runway Length - 188”
Width - 99.75” / Length - 224”
HD-9Wide Standard
Lifting Capacity - 9,000 lbs.Max. Lift - 70” / Runway Length - 164”
Width - 110.25” / Length - 200”
HD-9XWWide Tall Long
Lifting Capacity - 9,000 lbs.Max. Lift - 82” / Runway Length - 188”
Width - 110.25” / Length - 224”
SERIES FEATURES:
HD-9XLWide Standard Long
Lifting Capacity - 9,000 lbs.Max. Lift - 70” / Runway Length - 188”
Width - 110.25” / Length - 224”
12 For full product details and specifications, please visit www.bendpak.com
HD-9SWXDouble Wide Tall Long
Lifting Capacity - 9,000 lbs.Max. Lift - 82” / Runway Length - 188”
Width - 202” / Length - 224”
ACCESSORIES:
HD-9SWDouble Wide Standard
Lifting Capacity - 9,000 lbs.Max. Lift - 70” / Runway Length - 164”
Width - 202” / Length - 200”
Jack Platform Aluminum Deck Drip TraysRJ-45 Rolling Bridge JackCaster Kit
• Push button pneumatic safety release
• Electric/hydraulic power system
• Optional power unit locations
Longer approach ramps
Optional rolling bridge jacks
HD-9 Series
Rugged 1-1/4” roller axles
• Heavy-duty 3/8”aircraft cables
• Multi-position safety locks
Adjustable lock ladders
Independent backup slack-cable safety latches
Oversize self-lubricating cable sheaves
See it on the BendPak / Ranger YouTube Page
131645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
4-Post Heavy-DutyHDS Series Features & Specifications
•Adjustablerunwaywidths•Singlehydrauliccylinderunderramp•Fullyenclosedliftingcables,safety locksandsheaves•Pneumaticpush-buttonsafetyrelease•Featuresheavy-dutyaircraftcable•Runwaysfeaturenon-skidsurface
•Internal“anti-sway”sliderblocks ineachcolumn•Longerrampsforlowground clearancevehicles•Oversizedsheavediameters•Rugged,self-lubricatingcablesheaves•Featuresheavy-dutysheaveaxles
•Multi-positionsafetylocksincolumns•Dual-positionpowerunitlocations•Redundantslack-cablesafetylatches•Fullyadjustablelocklevelingstops•Drivethroughrampsoptionavailable•48”approachrampsavailable•Customizablepowerunitlocation
HD-14TSuper Tall
Lifting Capacity - 14,000 lbs.Max. Lift - 82” / Runway Length - 191”
Width - 126” / Length - 234”
HDS-14Standard
Lifting Capacity - 14,000 lbs.Max. Lift - 70” / Runway Length - 199”
Width - 130” / Length - 241”
HDS-14XExtended Length
Lifting Capacity - 14,000 lbs.Max. Lift - 70” / Runway Length - 229”
Width - 130” / Length - 271”
HDS-18
Lifting Capacity - 18,000 lbs.Max. Lift - 60” / Runway Length - 203”
Width - 154” / Length - 241”
HDS-27
Lifting Capacity - 27,000 lbs.Max. Lift - 60” / Runway Length - 263”
Width - 154” / Length - 297”
HDS-27X
Lifting Capacity - 27,000 lbs.Max. Lift - 60” / Runway Length - 323”
Width - 154” / Length - 357”
HDS-35
Lifting Capacity - 35,000 lbs.Max. Lift - 60” / Runway Length - 263”
Width - 154” / Length - 297”
SERIES FEATURES:
HDSO-14Open Front Plain Deck
Lifting Capacity - 14,000 lbs. Max. Lift - 70” / Runway Length - 199”
Width - 143” / Length - 244”
HDS-18X
Lifting Capacity - 18,000 lbs.Max. Lift - 60” / Runway Length - 323”
Width - 154” / Length - 357”
14 For full product details and specifications, please visit www.bendpak.com
HDS-40X
Lifting Capacity - 40,000 lbs.Max. Lift - 60” / Runway Length - 323”
Width - 154” / Length - 357”
HDS-35X
Lifting Capacity - 35,000 lbs.Max. Lift - 60” / Runway Length - 323”
Width - 154” / Length - 357”
HDS-40
Lifting Capacity - 40,000 lbs.Max. Lift - 60” / Runway Length - 263”
Width - 154” / Length - 297”
Lifting Capacity - 18,000 lbs.Max. Lift - 60” / Runway Length - 263”
Width - 154” / Length - 297”
DP-30 Rolling Oil Drain Air / Electric Work StationRolling Bridge Jack
• Adjustable height locking positions
• Stainless steel lifting cables
• Spring-loaded safety locks Integrated flow restrictor
Rolling Bridge Airline Kit
Greasable sheave pins
Non-skid runwaysWide ramp surface
Optional bridge jack
Redundant slack cable safety lock
Maintenance-free electric hydraulic power system and conveniently push button safety lock release
Large diameter cable sheaves
HDS-18E
151645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
ACCESSORIES:
Alignment LiftsHDS Series Features & Specifications
•Runawaysadjusttodifferentwidths•Multiauto-levellockingpositions•Singlehydrauliccylinder•Fullyenclosedliftingcablesandsheaves•Pneumaticpush-buttonsafetyrelease•Heavy-dutyaircraftcable•Runwaysfeaturenon-skidsurface
•Self-lubricatingcablesheaves•Oversizedsheavediameter•Featuresheavy-dutysheaveaxles•Fullyadjustablelockstops•Drivethroughrampsavailable•Rollingbridgeairlinekitavailable•Rollbackkitavailable
HDS-14LSX
HDS-14LSXE
SERIES FEATURES:
HD-9AE
HDS-18A
HDSO-14LSXOpen Front
HDS-27A
Max. 2 Wheel Align. - 212” / Max. Lift - 70”Capacity - 14,000 lbs. / Runway Length - 229”
Width - 130” / Length - 271”
Max. 2 Wheel Align. - 182” / Max. Lift - 70”Capacity - 14,000 lbs. / Runway Length - 199”
Width - 130” / Length - 241”
Max. 2 Wheel Align. - 151” / Max. Lift - 60”Capacity - 18,000 lbs. / Runway Length - 203”
Width - 154” / Length - 241”
Max. 2 Wheel Align. - 160” / Max. Lift - 70”Capacity - 9,000 lbs. / Runway Length - 188”
Width - 127” / Length - 224”
Max. 2 Wheel Align. - 182” / Max. Lift - 70”Capacity - 14,000 lbs. / Runway Length - 199”
Width - 143” / Length - 244”
Max. 2 Wheel Align. - 211” / Max. Lift - 60”Capacity - 27,000 lbs. / Runway Length - 263”
Width - 154” / Length - 297”
Equipped with rear slip plates and galvanized front turn plates
Courtesy of Jay Leno’s Big Dog Garage
HDS-18XA
Max. 2 Wheel Align. - 151” / Max. Lift - 60”Capacity - 18,000 lbs. / Runway Length - 203”
Width - 154” / Length - 323”
16 For full product details and specifications, please visit www.bendpak.com
HDS-35A HDS-35XA
HDS-18EAShown with rolling bridge jacks
Durable powder coat finish
• Single hydraulic cylinder
• Simple push-button lock release
• Maintenance-free power system
• Easy-to-reach operator controls Non-skid approach ramps
• Adjustable height locking positions
• Stainless steel lifting cables
• Spring-loaded safety locksDual-hub cable sheaves
Full floating galvanized turn plates
Non-skid runways
Recessed full floating slip plates
Optional bridge jack
Integrated hydraulic flow restrictor
Max. 2 Wheel Align. - 271” / Max. Lift - 60”Capacity - 35,000 lbs. / Runway Length - 323”
Width - 154” / Length - 357”
Max. 2 Wheel Align. - 271” / Max. Lift - 60”Capacity - 18,000 lbs. / Runway Length - 323”
Width - 154” / Length - 297”
Max. 2 Wheel Align. - 211” / Max. Lift - 60”Capacity - 35,000 lbs. / Runway Length - 263”
Width - 154” / Length - 297”
DP-30 Rolling Oil Drain Air / Electric Work StationRolling Bridge Jack Rolling Bridge Airline Kit
HDS-27XA
Max. 2 Wheel Align. - 271”/ Max. Lift - 60”Capacity - 27,000 lbs. / Runway Length - 323”
Width - 154” / Length - 357”
171645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
ACCESSORIES:
© 2011 BendPak, Inc. • BendPak, Inc. is a registered trademark.
This is my BendPak
There are many, but this one’s mine.
“Nothing I do or drive is stock. Everything that comes out of my shop has to be the best. That’s why me and my crew use BendPak products to customize every vehicle we touch. It’s a name I trust.”
– Jesse James, West Coast Choppers www.westcoastchoppers.com
19To see more images, follow us on Instagram @bendpak
Quatra ScissorsXR Series Features & Specifications
•12,000lbs.liftingcapacity•Extendedrunwaydesign•Durablepowdercoatfinish•Multi-positionrunwayworksteps•Non-skidrunwaysforsuregrip•Electric/hydraulicpowersystem•Integratedvelocityfusesforcylinders
•Powerconsolewithsimplecontrols•Opencenterdesign•Quadautomaticsafetylockswith pneumaticpush-buttonrelease•Lubricatedbearingonallpivotpoints•Ruggedsteellegs•Canbeflushmountedorrecessed
•Easytouseandunderstand•Highefficiencyhydraulicpowerunit•Equippedwithrearslipplatesand galvanizedfrontturnplates•Straightupverticallifting•Multi-positionautomaticlevelingsystem•Easyaccesstocomponentsforservicing
XR-12000AAlignment
SERIES FEATURES:
Rugged steel legs and formed steel runways
Multi-position automatic leveling system
Cylinders feature integrated velocity fuses to control sudden decent
Full floating recessed slip plates
Multi-position runway work steps
Extendable, hinged, collapsible, and stowable approach ramps
Easy access to electrical /hydraulic components with easy to use and understand operator controls
Grease fittings on all moving pins and bearings
MODEL XR-12000AAlignment
XR-12000Standard
LiftingCapacity 12,000lbs. 12,0000lbs.
OverallWidth 88” 88”
OverallLength 281.25” 257.75”
RunwayWidth 24” 24”
LengthofRunways 219.5” 193”
Max.2-WheelAlign. 194” N/A”
Max.LiftingHeight 75” 75”
See it on the BendPak / Ranger YouTube Page
20 For full product details and specifications, please visit www.bendpak.com
Durable powder coat finish will provide years of protection
Lubricated-for-life bearings on all pivot points
DP-30 Rolling Oil Drain Air / Electric Work StationRolling Bridge Jack Rolling Bridge Airline Kit
Collapsible front tire stops clear for low vehicle skirts and alignment instrumentation
Full floating recessed galvanized turn plates
Non-skid runways for sure grip
Open center design
Optional RJ-6 6,000 lb. capacity rolling bridge jack
XR-12000Standard Deck
211645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
ACCESSORIES:
Low-Rise & Mid-RiseScissors Series Features & Specifications
MD-6XPMid-Rise Portable
Adjustable Arms Capacity - 6,000 lbs.
Height Range - 4.75”- 48”
LR-5TLow-Rise
MDS-6KMid-Rise Scissor
Lift Pad Dimensions - 24”x 53” Capacity - 10,000 lbs.
Height Range - 4”- 22.75”
Lift Pad Dimensions - 19” x 58” Capacity - 6,000 lbs.
Height Range - 5”- 45.5” (48.5” with Blocks)
STANDARD FEATURES:
Portable ModelsMobile Power Cart
SP-7X & All Low-Rise Models1.5 inch Rubber Lift Blocks
MD-6XP ModelMulti Piece Adapter Set
22 For full product details and specifications, please visit www.bendpak.com
MD-6XP
Multi piece adapter set
Safety lock bar with multiple lock positions
Perfect for light-duty trucks and cars
Adjustable arm assemblies
Portable motor cart serves as tow handle
Twin hydraulic cylinders
Durable powder coat finish
Solid steel torsion bar
Comes standardwith rubber lift blocks
Comes standardwith adapter set
Comes standardwith 8 pc. adapter set
1.5” Rubber Lift Blocks 6” Rubber Lift Blocks LR-4A Arm Kit3” Rubber Lift Blocks
LR-60Low-Rise
Lift Pad Dimensions - 18” x 52”Capacity - 6,000 lbs.
Height Range - 4”- 26”
P-6FBOpen Center Pit Lift
Flush Mount
Lift Pad Dimensions - 18” x 53”Capacity - 6,000 lbs.
Height Range - 4”- 26”
P-6BOpen Center Pit Lift
Lift Pad Dimensions - 18” x 53”Capacity - 6,000 lbs.
Height Range - 4”- 26”
LR-60PLow-Rise Portable
Lift Pad Dimensions - 18” x 53”Capacity - 6,000 lbs.
Height Range - 4”- 26”
ACCESSORIES:
XR-12000Full-Rise Open Center
Lifting Capacity - 12,000 lbs.Max. Lift - 75” / Runway Length - 193”
Width - 88” / Length - 257.75”
Courtesy of Northwest Auto Salon
SP-7XFull Rise
Lift Pad Dimensions - 21.5” x 63”- 70”Capacity - 7,000 lbs.
Height Range - 5”- 68”
231645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Comes standardwith rubber lift blocks
Comes standardwith rubber lift blocks
Comes standardwith rubber lift blocks
Comes standardwith rubber lift blocks
Comes standardwith rubber lift blocks
P-6FB
GALLERY:
Parking & StorageParking Series Features & Specifications
SERIES FEATURES:
Light-Duty•Perfectforcars&lighttrucks•Singlehydrauliccylinder•Dependablehydraulicdesign•Easyoperation&simplecontrols•Electric/hydraulicpowersystem•Automaticsafetylocks
Heavy-Duty•Widebase-plateformaximumstability•Vehicledecksaccomodatemost passengercarsandlightdutytrucks.•Heavy-dutysteelconstruction•Built-inwheelstops•Two-positionfailsafelockingsystem
PLT-6S
Capacity - 6,000 lbs.Rise - 62.9” / Deck Length - 135”Width - 98.3” / Length - 153.5”
PL-18000
Capacity - 6,000 lbs. Per DeckOverall Height - 364” / Deck Length - 155”
Width - 114” / Length - 189”
HDS-35PX
Capacity - 35,000 lbs.Rise - 168” / Deck Length - 398.5”
Width - 185.5” / Length - 456”
PL-14000 PL-14000XL
Capacity - 7,000 lbs. Per DeckOverall Height - 280” / Deck Length - 155”
Width - 114” / Length - 193”
Capacity - 14,000 lbs. Per DeckOverall Height - 280” / Deck Length - 173”
Width - 114” / Length - 215”
PL-7000XR
Capacity - 7,000 lbs.Rise - 85” / Deck Length - 157.5”
Width - 98” / Length - 173.5”
See it on the BendPak / Ranger YouTube Page
24 For full product details and specifications, please visit www.bendpak.com
PLT-6S
PL-14000
GALLERY:
Wide-base plate mounts directly on ground or asphalt
• Overhead power unit provides smooth quiet hydraulic operation
• Power unit and controls integrated within the lift structure
• Automatic safety lock
Designed for installation on typical parking surfaces
Maintenance-free composite carriage bearings and self-lubricating chain rollers
Wide deck platform accommodates pickups, vans, and cars
Heavy-duty lifting chains
User-Friendly Controls
PL-7000XR
Minimum footprint allows multiple installations in limited space
251645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Rolling Bridge JacksOptional 4-Post Accessories
•4,500-25,000lbs.liftingcapacity•Versatiledropinliftingpads•Multi-pieceadaptersetstandard•High-pressurehydraulicpowerunit•Stackableadapters•Automaticsafetylocks•Threesafety-lockpositions
•Rubberliftingpadsorsteellifting padscomestandardoroptional•Optionalair-linekit•Raise2or4wheelsofftherunways•Telescopingrollerdesignallowsthe runwaystobeadjustedfordifferent treadwidths
Mobile Lift Features & Specifications
SERIES FEATURES: SERIES FEATURES:
RJ-45Rolling Jack
Lifting Capacity - 4,500 lbs.Lift Pad Reach - 41”- 60”Frame Reach - 36”- 47”
Lifting Capacity - 6,000 lbs.Lift Pad Reach - 41”- 60”Frame Reach - 36”- 47”
Lifting Capacity - 15,000 lbs.Lift Pad Reach - 29 ”- 59”Frame Reach - 46”- 59”
Lifting Capacity - 18,000 lbs.Lift Pad Reach - 40”- 64”
Frame Reach - 45”
Lifting Capacity - 25,000 lbs.Lift Pad Reach - 40”- 64”
Frame Reach - 45”
RJ-45
Lifting Capacity - 9,000 lbs.Lift Pad Reach - 42”- 61”Frame Reach - 45”- 50”
Lifting Capacity - 7,000 lbs.Lift Pad Reach - 41”- 60”Frame Reach - 36”- 47”
26 For full product details and specifications, please visit www.bendpak.com
RJ-6Rolling Jack
RJ-7Rolling Jack
RJ-9Rolling Jack
RJ-25Rolling Jack
RJ-15Rolling Jack
RJ-18Rolling Jack
Portable Column LiftMobile Lift Features & Specifications
•18,000-lb.individualcolumncapacity•108,000-lb.maximumsystemcapacity•SINGLE,PAIRorTEAMoperation•Three30’cablesareusedleavingthe frontorbackoftheliftclearofcables•Self-diagnosticsandself-calibration•Controlsystemsfeature24-voltcircuitry
•Variableheightlimitsettings•Two-speedloweringoptionsettings•Equippedwithawarninglightand audiblealarmforcriticalwarningalerts•Emergencyshutoff’soneachcolumn•Keylockenclosureoneachcolumn•Electronicsaremulti-fuseprotected
•Enclosedelectric-hydraulicpowersystem•Pallet-jackstylesteeringwheels•Extendedforksaccommodatewide tiresanddeepwheelconfigurations•Multi-widthwheelforkswithlockingpins•Tandem8”diameterpolyurethane coveredsteelwheels
SERIES FEATURES:
PCL-18
Column Capacity - 18,000 lbs.System Capacity - 108,000 lbs.
Lifting Height - 71.5”
Easily roll over dirt and debris
• SINGLE, PAIR or TEAM operation
• Rabbit or Turtle lowering speeds
• Multi-fuse protected
Emergency shutoffs on each column
*Can be configured in sets of 4 or 6
Multiple, automatic, independent safety locks spaced every 4 inches
Warning light and audible alarm
Multi-width wheel forks with locking pins
Durable powder-coat finish
Pallet-jack style steering wheels
30 ft. cables
PCL-18
271645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Pipe BendersBender Series Features & Specifications
•3-1/2”Min.bendingradius•5”Max.bendingradius•Canisterstylehydraulicfilter•5Hp/208-230VACmotor•Manualorautomaticcontrols•Drop-inswagingcollars•Twistlocktooling
•ANSI92.2Cylinders•Quickreleasebendingdies•Bendingheadstowithin.002”•Bendingandendfinishingoperation•Adjustablebackgatepressure•180ºbendingcapacity•Onepiecesolidsteelbarrel
•Directdrivehighspeed4GPMpump•Tooltrays•Largefluidreservoir•Filteredhydraulicsystem•Oilsightgauges•1/2”highpressurehose•Widevarietyoftoolingavailable
28 For full product details and specifications, please visit www.bendpak.com
1302BA-2021302BA-302
Bending Controls - Digital AutomaticClampless Swager - Internal Expander
202 or 302 Die Package Available
BB-1
Bending Controls - ManualClampless Swager - Internal Expander
BB-1 Die Package Available
SERIES FEATURES:
1302BAS-2021302BAS-302
Bending Controls - Semi-AutomaticClampless Swager - Internal Expander
202 or 302 Die Package Available
BB-2
Bending Controls - ManualClampless Swager - Internal Expander
BB-2 Die Package Available
1502BA-2021502BA-302
Bending Controls - Digital AutomaticClampless Swager - Internal Expander
202 or 302 Die Package Available
1502BAS-2021502BAS-302
Bending Controls - Semi-AutomaticClampless Swager - Internal Expander
202 or 302 Die Package Available
BB-1 / 202 Economy Die PackageBending and End Forming Tooling
Sizes - 1-1/2”- 1-3/4”- 2”- 2-1/4”- 2-1/2”
BB-2 / 302 Economy Die PackageBending and End Forming Tooling
Sizes - 1-1/2”- 1-3/4”- 1-7/8”- 2”- 2-1/4”- 2-1/2”
BB-1 / 202DIE PACKAGE
BB-2 / 302DIE PACKAGE
300-1 Die Package Card System CD300-2 Die Package Rotation DialSpecialty ToolingAvailable Upon Request
BB Series / 1302 SeriesTop View
1502 SeriesTop View
BAS Semi-Automatic Controls
BA Digital Automatic Controls
291645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
ACCESSORIES:
See it on the BendPak / Ranger YouTube Page
Air CompressorsLS Series Features & Specifications
•80-Gallonverticaltank•3-Cylinder/2-stagepump•ASMEratedtank•Siemens™electricmag-starter•Fan-typeflywheel•Fully-enclosedbeltguard•Oversizedrollerbearings
•Forgedductileironcrankshaft•Forgedaluminumalloypistons andconnectingrods•100%castironblock•Castironcylindersandheads withdeepcoolingfins•Forced-airaftercooler
•Oilsightgauge•Automaticpressureswitch•ASMEratedoverloadpressure safetyvalve•Pressuregaugewithvalve•Oversizedreplaceableairfilters•Automaticstart/stop
SERIES FEATURES:
The100%cast-ironTRI-MAX™Seriespumpfeaturessimple
splashlubricationfortotalreliabilityanda“W-3”finned
cylinderconfigurationthatprovides360°cooling.LowerRPM’sand
large-diameterfinnedcoppertubingbetweenstages,means
theywillruncooler,whichultimatelyachievesmaximum
compressorefficiencywithlessmoisturecontamination.
30 For full product details and specifications, please visit www.bendpak.com
Cast iron heads
Large mass-air filters
Large “Finned” copper tubing helps keeps air cool between stages and to tank
5 HP MODELS
LS580V-601 / 208-230 V / 60 Hz / 1 PhLS580V-603 / 208-460 V / 50-60 Hz / 3 Ph
Horsepower - 5 HpMaximum CFM - 22.8 / 175 psi
7.5 HP MODELS
LS7580V-601 / 208-230 V / 60 Hz / 1 PhLS7580V-603 / 208-460 V / 50-60 Hz / 3 Ph
Horsepower - 7.5 HpMaximum CFM - 28.5 / 175 psi
Deep cooling fins on the cast iron cylinders help maintain a lower operating temperature
Oversized balanced flywheel features large fan blades that forces cool air on the compressor pump
Pump cutaway
Moisture Minder® Kit Anti-Vibration PadsMoisture Minder®
ACCESSORIES:
311645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Forged aluminum alloy connecting rods
Fully-enclosed belt guard
American made motor
Siemens™ UL approved electric mag-starter
Wide base
Integrated tank drain
Oil site gauge
TriMax™ ReciprocatingAir Compressors ASME rated overload pressure safety valve
Pressure switch automatic start/stop
Oversized tapered roller bearings
100% cast iron pump
Forged aluminum alloy pistons
ASME rated 80 gallon tank
Power UnitsAC Power / 110 - 230 Volts / Vertical Mount
Ranger™AChydraulicpower-unitsareself-contained,dependablesourcesofhydraulicpowerthatcomestandardwithanabundanceoffeaturesandbenefitsinadurableandeconomicpackage.ThesehighqualitypowerunitsareidealforindustrialACapplicationssuchasautolifts,manlifts,elevatedworkplatforms,scissorlifts,docklevelers,conveyors,packagingmachines,machinetools,compactors,crimpingmachines,presses,roboticequipment,tailgatelifts,dumpbodies,cabtilts,emergencybackupunits,snowplows,log-splitters,harvestingmachinery,liftplatforms,scaffolds,presses,wastecompactors,carlifts,medi-calfieldanddentalfieldlifts,andmore.
32 For full product details and specifications, please visit www.bendpak.com
E0.2B8F1Power Unit
E3.7K3H2Power Unit
E1.2B8F1Power Unit
F3.2G3H1Power Unit
E2.1F3H1Power Unit
F2.1F3H1Power Unit
Gal Reservoir - 1.6 / PRV - 1900Motor - 1.5 HP / 110-230V-50/60-1PH
UL/ETL Listed
Gal Reservoir - 1.6 / PRV - 2500Motor - 1.5 HP / 110-230V-50/60-1PH
CE Listed
Gal Reservoir - 4.2 / PRV - 2650Motor - 2.5 HP / 208-230V-50/60-1PH
UL/ETL Listed
Gal Reservoir - 8.5 / PRV - 2400Motor - 2.5 HP / 208-230V-50/60-1PH
UL/ETL Listed
Gal Reservoir - 3.6 / PRV - 2850Motor - 2.5 HP / 208-230V-50/60-1PH
UL/ETL Listed
Gal Reservoir - 3.6 / PRV - 2650Motor - 2.5 HP / 110-230V-50/60-1PH
UL/ETL Listed
• UL / ETL Listed (except model E1.2B8F1)
• Vertical Design
• Built-in throttle and buffer valves reduce pre-load pressure
• Integrated fixed-setting pressure relief valve
• Submerged pump
• Spare pressure port
• Multi-hole adapter plate adapts to a wide variety of mounting applications
• Suction-strainer
• Breather and fill-cap
• Hardened-allow pump end plates for unmatched durability in demanding environments and severe duty applications
FEATURES:
QuickJackShop Equipment / Portable Jack Frame System
TheQuickJackwasdevelopedspecificallytoaddresstheshortcomingsthathaveplaguedtheracecircuitandDIYmarketfordecades.Gettingcarsoffthegroundshouldn’tbesuchachore.Wastingtimegettingcarsintheairmeanslesstimewrenching,andatthetracksecondsseparatewinnersfromlosers.TheQuickJackportableliftingsystemmakesvehiclemaintenanceonthetrackandoffconvenientandlightningfast.TheQuickJackcangoanywhereandcanbeeasilystowedinthetrunkorbackseatofmostcarswhennotinuse.Bringittothetrackordropitonyourgaragefloortoperformroutinemaintenanceinthecomfortofyourhome,allinseconds.Formoredetailsvisitwww.quickjack.com.PATENTPENDING.AllRightsReserved.
33For full product details and specifications, please visit www.quickjack.com
BL-3500
BL-5000
Capacity - 3,500 lbs. / PairHeight - 3”- 16.75” / Lifting time - 10 sec.
Individual Frame Weight - 45 lbs.
Capacity - 5,000 lbs. / PairHeight - 3”- 18.5” / Lifting time - 15-30 secs.
Individual Frame Weight - 65 lbs.
QUICKJACK ™
By Ranger Products
(4) Ea. 1.5” x 3” x 4” Rubber Blocks (4) Ea. 3” x 3” x 4” Rubber Blocks
(2) Ea. 150” Hydraulic Hoses (2) Ea. 14” Aux. Hoses
(1) Ea. Mini Hydraulic Power Unit110V-AC StandardIncludes pendant control(Optional 12V-DC available)
Includes:
(2) Ea. Quick-Mount Handles
(2) Ea. Jack Frame Assemblies
See it on the BendPak / Ranger YouTube Page
See it on the BendPak / Ranger YouTube Page
See it on the BendPak / Ranger YouTube Page
* Measurements for BL-3500* Measurements for BL-5000
34
Wheel ServiceTire Changers Features & Specifications
TM
SERIESRanger’s NextGen™ Tire Changers - Tire Shop Tested™
AllNextGenmodelsareloadedwithdesignenhancementsthatmakethetechnician’sjobeasier.Sturdyframes,rigid45mmhexagonalverticalshafts,andhardened-steelhorizontaloutriggersupportarmseliminateflexduringalltireserviceproceduresreducingthechanceofdamagetoexpensivewheels.BeadseatingandtireinflationissimpleandeffortlesswithRanger’sexclusiveTurboBlast™portablebeadseatingsystem.High-torqueelectricturntables,increasedspeedandreversibledirectionmeansquickertireremovalandinstallation.Industrial-gradepneumaticcontrolvalvesfeaturediecastandmachinedbodiesconstructedfromzincandaluminumforincreasedservicelifeandperformanceatthehighestlevelpossiblewithinalmosteveryimaginableworkingcondition.Importantwheelserviceaccessoriescomestandardlikealargesoapbucketwithbrushandamulti-pieceplasticwheelprotectorkitthatincludesturntablejawcovers,bead-breakerbladebootsandspecializedmount/demountheadcoverstohelpprotectdelicatewheels.
For full product details and specifications, please visit www.bendpak.com
R980AT/ATF Swing-Arm
Power Assist
Internal Clamping - 10”- 30”External Clamping - 9”- 28”
Maximum Tire Diameter - 50”
R745Swing Arm
Internal Clamping - 12”- 21”External Clamping - 10”- 18”Maximum Tire Diameter - 36”
Internal Clamping - 10”- 30”External Clamping - 9”- 28”
Maximum Tire Diameter - 50”
R980XR/XRFSwing Arm
Internal Clamping - 10”- 30”External Clamping - 9”- 28”
Maximum Tire Diameter - 50”
Internal Clamping - 10”- 30”External Clamping - 9”- 28”
Maximum Tire Diameter - 43”
Internal Clamping - 12”- 32”External Clamping - 11”- 30”Maximum Tire Diameter - 50”
R26FLTTruck Tire Changer
Drive System - Electric / HydraulicMaximum Rim Diameter - 14”- 26”
Maximum Tire Diameter - 63”
R980NXT/NXTFSwing Arm
Power Assist
R30XLT/XLTFSwing Arm
Power Assist
R76ATR/ATRFTilt-Back
Power Assist
Internal Clamping - 10”- 30”External Clamping - 9”- 28”
Maximum Tire Diameter - 43”
R76LTTilt-Back
Internal Clamping - 12”- 32”External Clamping - 11”- 30”Maximum Tire Diameter - 47”
R80DTXFLeverless
Tire Changer
35
Reduction /Extension Clamps
Wheel Protector KitComes Standard
Light & Medium TrucksAdapter Set
Truck Cone KitRWS-1TC-1
RWL-150T Wheel LiftFits R980XR/NXT & R30XLT
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
TM
SERIES See it on the BendPak / Ranger YouTube Page
R80DTXFLeverlessTire Changer
Fully adjustable wheel clamps
TurboBlast™ bead seating system
Up-front ergonomic controls
Dual lower bead lifting discs
Wheel positioning and restraint device
Multi-profile traveling drop-center tool
Bi-lateral bead loosener with hand control operation
Dual power drop rollers help keep beads in position through the entire mounting procedure
Tilt-back tower design
Automatic leverless bead lifting tool
Convenient foot operated controls Tire iron slot
ACCESSORIES:
Wheel ServiceWheel Service Features & Specifications
•Simple,one-manoperation•Heatstread,shoulderandsidewall•Curesthepatchesandinnertirelining•Rotatingadjustableframe•Adjustableheighttower•Contouredinnerandoutercuringheads•Availableinlowandhighvoltage
•Adjustableheighttirespreader•Air-powered•Perfectfortireinspectionandrepair•Heavy-dutyrollersallowtirestorotatefreely•Heavysteelconstruction•Wide-basedesignforstability•Powdercoatfinish
Optional Truck Adapter Kit DST-2420 FEATURES:
TS-150Tire Repair Wheel Lift
Wheel Lift Tire SpreaderAdjustable Height Lifting
Adjustable Spreader Forks
Heated Tire Repair / Tread & SidewallsRotating Adjustable Tower
Dimensions - 57” x 22” x 14”
Fully Equipped Multi-Piece SetAccommodates Medium &
Full Size Trucks
Safety shield comes standard
RL-8500 / RL-8500XLT (not pictured)Combination Brake Lathe Package
Work bench with large tool storage boards
Standard arbor provides a multitude of tooling choices
Tool tray for your convenience
One cut micro-finish with our micro dial twin tool cutters
Infinitely variable spindle and cross feed settings
Rugged cast iron body
Chip funnel and chip catcher
Durable dual work lamps
TS-150 FEATURES:
RV-80L / RV-80HTire Vulcanizer
Brake LatheTruck Adapter Kit
Fully equipped tool package comes standard See it on the BendPak / Ranger YouTube Page
RV-80L / H FEATURES:
Maximum Rotor Thickness - 2.5” Maximum Rotor Diameter - 17”
36 For full product details and specifications, please visit www.bendpak.com
Oursuper-dutytrucktoolingpackageforRangerbrakelathesconsistsofanupgraded1-7/8”arborandawidevarietyofadapters.Thisenormoussetallowsyoutoexpandthecoveragetohandlevirtuallyanyvehiclethrough1-tontrucks.FitsRangerbrakelatheswith1”arbor
•Dynamic,Static,andPerformance Alloysettings•Automaticround-offwithtop-dead- centerweightpositionindicator•Hardened-steel36-mmshaft•Quick-releasehubnut•Multi-usersavefunction
•PrecisionDataWand™andinnerdataarm•LowRPMbalancingspeedand rapidsix-secondcycletime•Automaticbraking•LEDinnerwheeltargetlight•Manualorautomaticstart•Selfcalibrationfunction
•Anergonomiccontrolboardand easy-to-readLEDdisplay•Highlyprecise64-bitarchitecture•Perfectlybalancedvibration-free counterweightedflywheelbeltdrive•Auto-stopfunction,electromagneticpulse combinedwithpneumaticbraking
DST-2420 FEATURES:
RB24TTruck Wheel Balancer
Max. Wheel Diameter - 30”Max. Tire Diameter - 50”
Max. Tire Weight - 400 lbs.
Tool tray for your convenience
DST-2420Wheel Balancer
RB24T FEATURES: TS-150 FEATURES:DST64T FEATURES:
DST-64TWheel Balancer with
DataWand™ Entry
CRT380RWireless Wheel Aligner
Self-centering wheel-clamp adapters
Cordless Bluetooth® sensors remove the hassle of connecting cables
“Before” and “after” measurements can be printed
Superior screen graphics with vibrant animation
Visual vehicle adjustment help
Technician has the option to customize units of measurement, accuracy, language, etc.
Customer information can be stored in the database, for quick reference of previous work orders
Max. Wheel Diameter - 10”- 30”Max. Tire Diameter - 47”
Max. Tire Weight - 145 lbs.
Max. Wheel Diameter - 10”- 30”Max. Tire Diameter - 50”
Max. Tire Weight - 150 lbs.
371645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Jacks & LiftingLifting Features & Specifications
RFJ-2TX
Capacity - 4,000 lbs.Height - 3.5”- 31.5”Chassis Length - 37”
RFJ-214T
Capacity - 4,500 lbs.Height - 5”- 19.25”
Chassis Length - 26”
RFJ-3TQP
Capacity - 6,000 lbs.Height - 5”- 19.75”
Chassis Length - 25.5”
RFJ-3TP
Capacity - 6,000 lbs.Height - 5.25”- 19.25”Chassis Length - 26”
RFJ-3000LPF
Capacity - 3,000 lbs.Height - 2.75”- 24”
Chassis Length - 34”
RFJ-3000AL RFJ-4000AL
Capacity - 3,000 lbs.Height - 3.5”- 17.5”Chassis Length - 24”
Capacity - 4,000 lbs.Height - 3.5”- 17.75”Chassis Length - 24”
INFORMATION: GALLERY:
RFJ-6HD
Capacity - 6,000 lbs.Height - 3.625”- 21”Chassis Length - 27”
Ranger’swide-arrayofmulti-purposefloorjacksjustkeepsgettinglargerandmorediverse.Ourcurrentlineoffloorjackshasmaximumcapacitiesrangingfrom2,000to55,000lbs.andcomeinavarietyofstyleslikequick-pumpandlow-profile.Nomatterwhichoneyouchoose,Rangerfloorjacksofferincredibleliftingpowerandtopnotchconstructionthatyoucancountontoneverletyoudown.Ourimpressivelineoffloorjacksiscarefullydesignedtoaccommodateawidespectrumofweightcapacitiesandliftingapplications,easilyliftingjustaboutanythingthatneedsservice.
38 For full product details and specifications, please visit www.bendpak.com
RFJ-3000LPF
RBJ-25TL
Capacity 1st Stage - 55,000 lbs.Capacity 2nd Stage - 20,000 lbs.
Height - 7.125”- 14.75” / Chassis Length - 30”
RFJ-10TL
Capacity - 20,000 lbs.Height - 7”- 23”
Chassis Length - 61”
RFJ-3T
Capacity - 6,000 lbs.Height - 4.75”- 20.5”Chassis Length - 28”
RTJ-1
Capacity 1st Stage - 2,000 lbs.Capacity 2nd Stage - 1,000 lbs.
Height - 37”- 73” / Base - 39” x 39”
RTJ-1100
Capacity - 1,100 lbs.Height - 45”- 72”Base - 24” x 24”
RTJ-3000
Capacity 1st Stage - 3,000 lbs.Capacity 2nd Stage - 2,000 lbs.
Height - 37”- 79.5” / Base - 45” x 45”
RFJ-4000AL
GALLERY:
391645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Jacks & Lifting
•Weldedsteelconstructionfor maximumdurability•Safetyratchetdesignassuresstands remainlockedunderload•Perfectforholdingdrive-trainor exhaustcomponentsinposition•Soldinpairs
•Quickadjustspinhandlewiththrustbearing•Widebaseprovidesmaximumstability•Thick,rubberadjustablepadfor maximumsupport•Convenienthandleandcolumnrelease•HardenedACMEscrewforeasyadjustment•Tripoddesignevenlydistributesweight
•Pneumaticoperatedwheellift•One-handed,levercontrolled•Heavy-dutysteelcasters•Bearingmountedslider•Stabilizesvehiclesraisedonlifts•Heavy-steelconstructionfor maximumdurability
SERIES FEATURES:
RJS-12T
Holding Capacity - 24,000 lbs.Height - 20”- 30.5”
Base Dimensions - 14.5” x 13”
RJS-6T
Holding Capacity - 12,000 lbs.Height - 15.5”- 24.5”
Base Dimensions - 9” x 10.5”
RJS-3T
Holding Capacity - 6,000 lbs.Height - 11.5”- 17”
Base Dimensions - 7” x 7.5”
RJS-1TF
RWL-150T
Holding Capacity - 1,650 lbs.Height - 54.5”- 80.5”
Base Dimensions - 12”
Lifting Capacity - 150 lbs.Pneumatic Operation
Fits R980XR/NXT & R30XLT
RJS-1T
Holding Capacity - 1,650 lbs.Height - 54.5”- 80.5”
Base Dimensions - 12”
MLS-18
Holding Capacity - 18,000 lbs.Height - 48.75”- 74.5”Base Dimensions - 32”
SERIES FEATURES:
RJS-2TH
Holding Capacity - 4,000 lbs.Height - 55”- 87”
Base Dimensions - 24” x 24”
Lifting Features & Specifications Lifting Features & Specifications
40 For full product details and specifications, please visit www.bendpak.com
RWL-150T
RML-1100RML-1500XLSuper Stretch
Lifting Capacity - 1,100 lbs.Height - 3.5”- 16”
Top Dimensions - 6”- 17.75”
Lifting Capacity - 1,500 lbs.Height - 7”- 45” / Table Width - 30”- 53”
Table Length - 89”- 102”
•Constructedoutof12-gaugesteel•Pneumaticliftingcylinder•Durablepowder-coatfinish•Adjustablefrontwheelvise•Drop-awayrearwheeldeck•Easyramp(s)removal•Frontandsideextensionsstandard
•Built-inretractableswivelcasters•Fulltravelautomaticsafetylocks•Singlehydraulicliftingcylinder•Sidedeckscanbeeasilyremoved•Diamond-plateapproachramps•Airorhydraulicpumpoperation•Multiplelockingpositions
SERIES FEATURES:
RML-600XL
Lifting Capacity - 1,000 lbs.Height - 7”- 31.5” / Table Width - 24”- 44”
Table Length - 79”- 98”
Motorcycle LiftsLifting Features & Specifications
RML-1500XLSuper Stretch
Heavy 12-gauge steel construction
Approach ramp extension
Air or hydraulic pump operation
Rear support poles
Retractable real wheel deck
Full travel automatic safety locks
Single hydraulic lifting cylinder
Side Extensions
Extended platform length
Built-in retractable swivel casters can be moved when loaded
RML-1100Optional Jack Stand
411645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Tool Storage & BenchesBoxes & Benches Features & Specifications
RTB-2D
Number of Drawers - 2Unit Dimensions - 26.25” x 10.5” x 12.25” Mates with RTB-9D / RTB-7DC / RTB-10D
RTB-13DC
Number of Drawers - 13Unit Dimensions - 47.5” x 40” x 19”
Mates with RTB-8D / RTB-8DT
RTB-7DC
Number of Drawers - 7Unit Dimensions - 29” x 40” x 18”
Mates with RTB-2D / RTB-9D / RTB-10D
RTB-9D
Number of Drawers - 9Unit Dimensions - 26” x 17” x 12”
Mates with RTB-2D / RTB-7DC
RTB-8DT
Number of Drawers - 8Unit Dimensions - 41.5” x 19” x 18.5”
Mates with RTB-13DC
RTB-8D
Number of Drawers - 8Unit Dimensions - 41.5” x 19” x 18.5”
Mates with RTB-13DC
RTB-10D
Number of Drawers - 10Unit Dimensions - 26” x 19” x 16”
Mates with RTB-2D / RTB-7DC
INFORMATION:RangerToolboxesandtoolchestsaregainingpopularitybythedayinautomotiveshopsandprivategarages.That’sbecauseourtoolstoragesolutionsarebuilttothestrictestspecifications,featuringhigh-grade16and18-gaugesteelconstruction,durableinternalcages,high-qualitywelds,allthebestdrawerhardwareandamasterfulcherry-redpowdercoatfinishthatlooksbetterthananystockpaintjobonthemarket—andit’lllastforevertoboot.
Withoutquestion,foryourprojectstogetcompletedontimeandtoyoursatisfaction,yourequireadedicatedworkarea.SoRangerdevelopedalineoflarge,heavy-gaugesteelworkbenches,specificallydesignedtohandlethephysicalrigorsofbeinginabusygarageorshop.Wecurrentlyofferthreesizesandstylestosuityourneedsandspacerestraints.
42 For full product details and specifications, please visit www.bendpak.com
RWB-1TD
Height - 40”Width - 48”Depth - 32”
RWB-2S
Height - 34.5”Width - 79”
Depth - 25.25”
RWB-2D
Height - 34.5”Width - 59”
Depth - 25.25”
•Electrostatictriple-bakedprotectivepowdercoat•Rollededgesforaddedstrengthandrigidity•Full-extensionballbearingdrawerslides•Tumblerkey-lockpivotdrawerlatchingsystem
•Glossyredfinish•Electrostaticoven-bakedpowdercoat•Rollededgesforaddedstrength andrigidity•5/32”HDrollededgesteeltabletop•3/32”HDrollededgesteelshelves•12-gaugeconstruction
•Lockableheavy-dutydrawer•500-lb.workingcapacity•Heavy-duty4”casters•Adjustableworkingheight•Removablepolyethylenefluiddrain•14-gaugetabletop•3/4”liquidcontainingrim
RWB-2D FEATURES:
Rolled edges for added strength and rigidity
Protective rubber mat
Chrome side handles
Brushed aluminum drawer handles
2 heavy-duty fixed urethane casters and 2 heavy-duty swivel urethane casters with brakeElectrostatic oven baked
powder coat finish
Heavy-gauge steel body
Full-extension ball bearing drawer slides
RTB-8D / RTB-13DCShown as combo
RWB-2S FEATURES: RWB-1TD FEATURES:
431645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Shop EquipmentShop Equipment Series Features & Specifications
RCD-1TDAuto Carts
Capacity - 1,000 lbs. (Each)Dimensions - 15.5” x 23.5”
3.5” Cast Iron Ball Bearing Casters
RP-20T
Capacity - 40,000 lbs.Cylinder Stroke - 8”
Width - 23” / Height - 59”
RP-10TPPorta Power
GoCart™Storage Rack
Capacity - 10 Tons / 20,000 lbs.Stroke Ram - 6”Hose Length - 6’
Load Rating - 200 lbs.Dimensions - 19” x 31” x 6”
Holds up to 4 GoCart™ Dollies
RCD-1VVehicle Dolly
RCD-1500GoCart™
Vehicle Dolly
Lifting Capacity - 1,500 lbs.Overall Height - 12”Caster Size - 4.5”
Load Rating Each - 1,500 lbs.Wheel Size Capacity - 8”- 24”
Tire Diameter Capacity - 15”- 28”
RP-20HD
Capacity - 40,000 lbs.Cylinder Stroke - 5.5”
Width - 37” / Height - 60.25”
SERIES FEATURES:
RP-20HD
Integrated 4” diameter 20-ton pressure gauge
Hydraulic cylinder moves laterally
Adjustable table height
INFORMATION:LetRangerProductslightentheloadwithourconsiderablelineofhigh-qualityrollingequipment.AllRangerCartsandDolliesaremadefromhigh-gaugesteelandemployonlythebestcastersforeasymaneuvering.Ourservicecarts,chassis-mountvehicledollies,low-profileautomobilecartsandrollingadjustableworktablescomefullyequippedtomakeyourdayinthegarageinfinitelyeasier.Don’tliftorcarry—rollwithRanger!
Ranger’sindustrialshoppressesofferyoutheversatilityofprofessional-gradehydraulicforce,whetheryou’reattheshoporinyourowngarage.Amongotheroperations,allRangerHydraulicPressesareidealfortheremovalandinstallationofgears,bushingsandbearings—soyoucanbend,straighten,flatten,crush,press,shape,push,pull,liftandspreadlikeyouwereborndoingit.
TM
TM
TM
TM
TM
TM
44 For full product details and specifications, please visit www.bendpak.com
RH-50PL
Air Pressure - 300 psiHose Length - 50’
Fittings - 3/8”
RH-50SL
Air Pressure - 300 psiHose Length - 50’
Fittings - 3/8”
RH-33SL
Air Pressure - 300 psiHose Length - 33’
Fittings - 3/8”
RH-50PM
Air Pressure - 2,250 psiHose Length - 50’
Fittings - 3/8”
•Wall,floor,orceilingmount•Useforairorwater•Powdercoatedforcorrosion freeperformance•Solidbrassswivelfitting•Guidearmsadjuststo9positions•4-direction,non-snagrollers
•Multi-positionreleaseratchet•Anti-lockoutratchetmechanism preventsreelfromlockingupwhen hoseiffullyextended•Reinforcedmountingbase•Convenientlyrewindsitwithouthassle•Compact,space-savingdesign
SERIES FEATURES:
RH-50PL
Use for air or water
Solid brass swivel fitting
Wall, floor, or ceiling mount with a 7” x 8” reinforced mounting base
Anti-lock out ratchet mechanism prevents reel from locking up when hose is fully extended
4-direction, non-snag rollers
451645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Shop Equipment
Oil Drains•Lightweightforeasyportability•Safeandeasytouse•Non-corrosivetelescopingtube•Heavy-dutystainlesssteelclamp•Built-inhandgrips•Durablesteelconstruction
•Toughconstructionwillresistdents, rust,andcorrosion•Ruggedfunnelwithbuilt-in contaminationscreenOil Filter Crushers•Reducescansupto20%•Reducesfiltersupto25%
•Crushescansinonly20seconds•100%airoperated•FulfillsEPAandothermandated environmentalstandards•Removesupto95%oftheoil•Compactfloororbench-mountdesign•All-steelindustrialconstruction
SERIES FEATURES:
RD-15
Capacity - 15 gal. Height - 8.5”
Shipping Weight - 52 lbs.
RD-18G
Capacity - 8 gal.Height - 47”- 63”Funnel Diameter - 17”
RP-20FCOil FilterCrusher
RP-6KCPaint Can
Crusher
Capacity - 3 Ton / Cycle Time - 15 - 20 sec.Air Requirements - 140 - 160 psi
Dimensions - 15” x 37” x 14”
RD-20SEAir EvacOil Drain
Capacity - 20 gal. Height - 52”- 83”
Funnel Diameter - 16”
RP-20FCSStand
Capacity - 230 lbs.Unit Weight - 72 lbs.
Dimensions - 27.75” x 42” x 17.75”
RD-8G
Capacity - 18 gal.Height - 48”- 72”Evacuation Pump
See it on the BendPak / Ranger YouTube Page
Capacity - 10 Ton / Cycle Time - 15 - 20 sec.Air Requirements - 125 - 175 psiDimensions - 17” x 29.5” x 17”
Shop Equipment Series Features & Specifications
46 For full product details and specifications, please visit www.bendpak.com
RS-750SprayWash
Cabinet(Truck)
Load Capacity - 1,000 lbs.Tank Capacity - 53 gal.
Interior Dimensions - 32” x 54”
RS-500SprayWash
Cabinet
Load Capacity - 500 lbs.Tank Capacity - 50 gal.
Interior Dimensions - 43” x 32”
•Heavy-dutysteelconstruction•Removabletankscreen•Stainlessoilskimmer•Removablepartstree•Powdercoatfinish•Brassnozzles•Fullopeningoctagonaldoor
•Largedrainpipe•Heavy-dutyrubbercasters•Friction-driveturntablesystem•Gasket-freedoor•Smallpartsbasket•Stainlesssteelhandles•Freebucketofsoapincluded
•Non-foamingsoap•LowpH•Mildalkali•Watersoluble•Speciallyformulated•Removesgrease,oil,stains,carbon, protein,andsomepaints
RS-750
Quick release door latch
Heavy-duty rubber casters
Removable tank screen and parts tree
Stainless oil skimming system
Built-in tank drain
Automatic timer and safety door switch
Friction-drive turntable system
SOAP 20 LBS. / 50 LBS.
Low pHWater soluble
Non foaming soap
RS-500 / RS-750 FEATURES: SOAP FEATURES:
471645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
See it on the BendPak / Ranger YouTube Page
Shop Equipment
Bubble Balancer•Ruggeddie-castaluminumheadcone•Easytouseself-levelingstand•Built-inweight-storagecompartments•Self-aligning,spring-loadedcone•Hardenedcastpivotseat•Recessedcircularlevelbubble
Rolling Creeper/Work Seat•Paddedcentercushionandheadrest•Swivelcastersforeasymaneuverability•Relievessorebackmuscles•Workmoreefficiently•Sturdysteeltubingconstruction•Lowprofiledesign
Tire Changers•Rubbergriphandles•Perfectforhomeorshopuse•Portableandeasy-to-use•Heavysteelconstruction•Self-levelingstand•Efficientoperationatafractionofcost
SERIES FEATURES:
RST-1WSRolling Work Seat
Steel Tubing - 1”Swivel Casters - 2.5”
Relieves sore back muscles
RST-1CRolling Creeper
Weight Capacity - 350 lbs.Steel Tubing - 3/4”
Swivel Casters - 2.5”
RWS-3TCManual Tire Changer
Tire Capacity - 8”- 7.5” x 16”Wheel Plate Diameter - 7.5”Base Dimensions - 15” x 18”
RWS-2TCMini Tire Changer
Tire Capacity - 4”- 12”Shipping Weight - 14 lbs.
Shipping Dimensions - 22” x 7” x 6”
RWS-1BBubble Wheel
Balancer
Hub Hole Diameter - 1.5”- 4.5”Calibrated at - 90º- 180º- 270º- 360º
Width - 12” / Height - 23”
RWS-1B
Easy to use self-leveling stand
Cast aluminum base
Recessed circular level bubble
Rugged die-cast aluminum head cone
Built-in weight-storage compartments
Plated steel guide rods with zinc support springs 6061 extruded aluminum
ASTM B 221 shaft
Hardened pivot pin for maximum durability
Shop Equipment Series Features & Specifications
48 For full product details and specifications, please visit www.bendpak.com
RSC-2TFFolding Shop Crane
Boom Length - 40”- 63”Boom Capacity - 1,100 - 4,400 lbs.
Boom Height - 80”- 93”
RES-1TFEngine Stand
Holding Capacity - 2,000 lbs.Front Width - 31” / Rear Width - 27.5”
Height - 37.5” / Length - 41”
RST-500ESEngine Support
RST-500ESDEngine Support
Holding Capacity - 1,500 lbs.Screw Travel - 13”
Adjustable Width - 40”- 63”
Holding Capacity - 1,100 lbs.Screw Travel - 18.75”
Adjustable Width - 26.5”- 49.5”
•Adjuststofitallvehicles•Rubberfootpadstoholdloadsecurely•Straddlesinnerfenderwells•Preciselypositionsengineforeasy gearboxandtransmissionremoval•Perfectfor4and6cylinderengines•1,100lb.&1,500lb.capacity
•Foldsuprighttoconservespace•Heavysteelconstruction•Longrubber-griphandle•Headswivels360ºforeasypositioning•Heavy-dutyswivelcasters•Slottedadjustablesaddlepermits•Neckisreinforcedforextrastrength
•Designedforshopswithlimitedspace•Foldsforeasystorage•Heavy-dutysteelcasters•Neckisreinforcedforextrastrength•Widebaseformaximumstability•Telescopingboomprovides4positions•Heavysteelconstruction
RES-1TF
RST-500ES / RST-500ESD: RES-1TF FEATURES: RSC-2TF FEATURES:
RST-500ESD
491645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
BendPak recognizes the manufacturing process as our moment of maximum influence. When we ship a piece of equipment, we need to know that the product that left our manufacturing complex was the best it could be. That’s why we demand nothing short of the very finest in facilities and machinery. Our primary factory houses development and manufacturing for medium and heavy-duty lifting products and wheel service models. At just over 300,000 square foot it’s a facility designed for maximum efficiency and safety, where we employ the best steel fabrication techniques in the world.
Manufacturing Superiority
MEDIUM AND HEAVY-DUTY PRODUCTS
BendPak’s second mega-sized manufacturing is used primarily for manufacturing light and medium duty lift products, select parking systems, and select vehicle repair tools and equipment. The multiplex factory houses state-of-the-art equipment including numerically-controlled turning and milling equipment, automated welding systems and full-capability services like comprehensive metallurgy testing, heat treatment, automated powder coating, and other specialty operations. The facility also houses assembly and packaging operation centers and product development testing labs for BendPak’s growing customer base around the globe.
BendPak / Ranger
50 For full product details and specifications, please visit www.bendpak.com
LIGHT AND MEDIUM-DUTY LIFT PRODUCTS
Our multi-department manufacturing complexes have allowed us to expand machinery and employees and triple our daily production capacity. All BendPak employees are Q.C. trained and follow rigid ISO-9001 guidelines. Every day, more than 700 employees around the world dedicate themselves to putting our core values into action. Safety is first—it’s our company’s top priority, followed closely by environmental responsibility, cost-efficiency, quality, customer service and accountability for all departments. These principles guide our highly skilled workforce towards BendPak’s unified vision.
Across the globe, BendPak’s facilities encompass over 600,000 square feet in total and consist of vertically integrated manufacturing, operations and logistics facilities. Each location follows strict guidelines as outlined by ISO-9000, further supporting our position as a premier global manufacturer. At BendPak, we ensure that our offshore manufacturing is no different in approach, standards, quality, inspection or packaging from our domestic production. These facilities are audited year round and undergo systematic evaluation of documented quality programs such as TUV, ANSI/ALI ALCTV, CSA, UL and AS/NZS 1418.9. The programs themselves are audited quarterly, regardless of the facility location, to ensure continued compliance with all applicable standards.
BendPak, Ranger Products and BendPak / Ranger related marks are trademarks and/or registered trademarks of BendPak Inc.
511645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Inquire about these certification listings.
1645 Lemonwood Drive • Santa Paula, CA USA 93060 Tel: 1-805-933-9970 • Fax: 1-805-933-9160 • www.bendpak.com
© 2014 BendPak, Inc. • BendPak, Inc. / Ranger Products are registered trademarks.