BPK RNR Catalog 2014 Final Web

The B

enchmark o

f Quality

®

© 2

011

Ben

dP

ak, I

nc. •

Ben

dP

ak, I

nc. i

s a

reg

iste

red

tra

dem

ark.

This is my BendPak

SCAN TO WATCH THE VIDEO NOW

There are many, but this one’s mine.“If you’re going to put your wheels through hell, be sure you’ve got the rock-solid muscle to bring them back to life. BendPak lifts are built as ruthless as the road itself. Never compromise.”

– Bill Goldberg, Professional Athlete & TV Host @Goldberg

Table of Contents

Tel: 1-805-933-9970 · Fax: 1-805-933-9160 · www.bendpak.com

BendPak / Ranger

Medium-Duty Clear Floor LiftsMedium-Heavy Floor Plate LiftsHeavy-Duty Clear Floor Lifts4-Post Light-Duty Lifts & Accessories4-Post Light-Duty Lifts4-Post Heavy-Duty LiftsAlignment LiftsThis is my BendPakImage GalleryQuatra Scissors Low-Rise & Mid-Rise LiftsParking & StorageRolling Bridge JacksPortable Column LiftPipe BendersAir CompressorsPower UnitsQuickJack Tire ChangersTire Repair / Brake LathesWheel Balancers / Wheel Aligner Floor Jacks / Transmission JacksJacks Stands Motorcycle LiftsTool StorageWork BenchesCarts & Dollies / Shop PressesHose ReelsOil Drains / Oil Filter CrushersParts WasherWheel Balancer / Rolling Creeper / Work Seat / Tire ChangersEngine Support / Engine Stand / Shop CraneManufacturing Superiority

4-56-78-9

10-1112-1314-1516-17

1819

20-2122-2324-25

2627

28-2930-31

3233

34-353637

38-3940414243444546474849

50-51

GENERAL DISCLAIMER

BENDPAK/RANGER warrants to the original purchaser only that all products shown in this catalog conform to BENDPAK/RANGER published

specifications and are free from defects in material or workmanship. In no event will BENDPAK/RANGER be liable to you or to anyone else for any

decision made or action taken by you or anyone else in reliance on information obtained from this catalog. BENDPAK/RANGER has exclusive title

and ownership rights, including all intellectual property right, throughout the world in all material and content contained on these pages. Materials,

design, specifications, images and other content within this catalog are subject to change. BENDPAK/RANGER does not take responsibility for improper

use or any results thereof. BENDPAK/RANGER products are provided and sold as is without any express or implied warranties including warranties of

merchantability or fitness for particular purpose. In no event will BENDPAK/RANGER be liable for any special, incidental, or consequential damages based

on breach of warranty, breach of contract, negligence, strict tort, or any other legal theory. Damages that BENDPAK/RANGER will not be responsible for

include, but are not limited to: loss of profits; loss of savings or revenue; loss of use of the product or any associated equipment; cost of capital; cost of

any substitute equipment, facilities, or services; downtime; the claims of third parties, including customers; and injury to property. This limitation does not

apply to damages caused by breach of the warranty of title and against infringements or to claims for personal injury. Unless modified in a writing signed

by both parties, it is understood that BENDPAK/RANGER published warranties are to be the complete and exclusive agreement between the parties.

For complete and full warranty details contact BENDPAK/RANGER at 1-805-933-9970 or visit www.bendpak.com

Equ

ipm

ent m

odel

s sh

own

in th

is c

atal

og m

ay b

e av

aila

ble

in d

iffer

ent v

olta

ges

upon

requ

est.

Medium-Duty Clear FloorXPR Series Features & Specifications

•Wideornarrowconfiguration•Exclusive“Tru-Metric”arms•Single-pointsafetyrelease•Dual“Direct-Drive”cylinders•Electric/hydraulicpower•17”x19”A36steelbaseplate•UHMWpolyethylenebearings

•Dual3”-spacedsafetylocks•Automaticarmrestraints•Heavy-dutyaircraftcable•Oversizedsheavediameter•Paddedsafety-shutoffbar•8-piecetruckandvanadapters•Triple-telescoping/low-proarms

•Contactpads•Stackableadapters•Singlepiececolumns•Optionalfootguards•Accommodatesawidevariety ofvehiclesassemblies•Safetylocksineachcolumn

XPR-7TRTurf Lift

XPR-10-LPClear Floor Low-Pro Arms

Lifting Capacity - 7,000 lbs. Max. Lift Height - 73”

Width - 145” / Height - 145”

XPR-10Clear Floor

Lifting Capacity - 10,000 lbs.Max. Lift Height - 73”

Width - 132” or 145” / Height - 145”


Width - 132” or 145” / Height - 145”


Width - 132” or 145” / Height - 145”

SERIES FEATURES:

XPR-10-168Clear Floor Extended Height

XPR-10A-168Asymmetric Extended Height

Features bolt-on top extension for added

24” clearance

2-stage low-profile armsfeatured on LP lift models

4 For full product details and specifications, please visit www.bendpak.com

XPR-10A-LPAsymmetric

Low-Pro Arms

XPR-10AAsymmetric


Width - 132” or 145” / Height - 145”

XPR-10-LPXPR-10A-LPFeature low-profile arms

Steel Lift PadsTuf-Pads Offset Adapters Air / Electric Work StationFrame Cradle Pads

• Heavy-duty 1/2” aircraft quality equalizer cables

• Safety locks every 3”

ACCESSORIES:

Adjustable WidthCan be installed in either wide or narrow configurations

Dual hydraulic direct-drive cylinders

Padded overhead safety shutoff bar

Oversized cable sheave diameter reduces cable fatigue

Single point safety release

Automatic arm restraints

Triple-telescoping arm design

Versatile drop-in contact pads

UHMW polyethylene bearing system

XPR-10AShown with air / electric work station and foot guards

FREE truck and van adapters come standard with all BendPak 2-post lifts

51645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970

Medium-Heavy Floor PlateXPR Series Features & Specifications

XPR-7TRFXFloor Plate Turf Lift


Width - 145” / Height - 145”

XPR-9DDirect-Drive Floor Plate


Width - 132” or 145” / Height - 145”

XPR-12FDHeavy-Duty Floor Plate


Width - 155” / Height - 144”

•Adjustablewidthdesign•Dualhydraulicliftingcylinders•Single-piececolumns•Singlepointsafetyrelease•Drop-endarmsprovide alowerpadheight•Triple-telescopingarms

•Electric/hydraulicsystem•Self-lubricatingdura-glideUHMW polyethylenebearingsystem•Dual3”-spacedsafetylocks•Automaticarmrestraints•Truckandvanadapters•Versatiledropincontactpads

•Adjustablewideornarrow drive-thruconfigurations•Durablepowdercoatfinish•Opentopdesign•Largesteelbaseplates•Heavy-duty3/8”equalizercables•Ruggedsteelconstruction

XPR-9Shorty Floor Plate

XPR-9-LPShorty Floor Plate


Width - 132” or 145” / Height - 113”


Width - 132” or 145” / Height - 113”

SERIES FEATURES:

Arms shown with optional foot guards

Frame cradle pads come standard


2-stage low-profile armsfeatured on model: XPR-9-LP

Low profile floor plate

XPR-9DShown with air / electric work station and foot guards

Triple-telescoping arm design

Versatile drop-in contact pads



Steel Lift PadsTuf-Pads Offset Adapters Air / Electric Work StationFrame Cradle Pads


• Heavy-duty dual 3/8” equalizer cables




FREE truck and van adapters come standard with all BendPak 2-post lifts


ACCESSORIES:

Heavy-Duty Clear FloorXPR Series Features & Specifications

•Dual-synchroequalizationsystem•Electric/hydraulicpowersystem•UHMWpolyethylenebearings•Single-piececolumns•Dual“Direct-Drive”cylinders•Singlepointsafetyrelease•Automaticarmrestraints

•8-piecetruckandvanadapters•Oversizedcolumnbaseplates•Paddedsafety-shutoffbar•Safetylocksineachcolumn•Heavy-duty1/2”equalizercables•Powdercoatfinish•Rubberdoorbumpers

•Versatiledropincontactpadswith convenientstorage•Triple-telescopingarms/XPR-12C•Extendedheighttop-beamprovides greateroverheadclearance•Oversizedcablesheavediameter•Rubberliftpadswithstackableadapters

XPR-12C


Width - 155” / Height - 170”

XPR-15C


Width - 155” / Height - 170”

XPR-18C


Width - 155” / Height - 170”

Frame cradle pads come standard Frame cradle pads come standard Frame cradle pads come standard

SERIES FEATURES:


Frame Cradle PadsTuff-Pads Steel Lift Pads Air / Electric Work StationMobile High-Lift Jack Stand

XPR-15CShown with

optional equipment

• Heavy-duty 1/2”aircraft-quality equalizer cables





Padded overhead safety shutoff bar

Durable rubber lift pads



XPR-12C-192XPR-15C-192XPR-18C-192Features bolt on top extension for added 24” clearance

Adapter storage

Oversized A36 steel base platesFREE truck and van adapters come standard with all BendPak 2-post lifts


ACCESSORIES:

4-Post Light-Duty

HD-7500BLBoat Storage

Lifting Capacity - 7,500 lbs.Max. Lift - 70” / Runway Length - 164”

Width - 132” / Length - 200”

HD-7PXW Super Tall

HD-7PXN Super Tall


Width - 110.25” / Length - 213”


Width - 99.75” / Length - 213”

HD-7PNarrow


Width - 99.75” / Length - 189”

SERIES FEATURES:

HD-7WWide


Width - 110.25” / Length - 189”

•Runwaysfeaturenon-skidsurface•Singlehydrauliccylinderunderramp•Fullyenclosedliftingcables,safety locksandsheaves•Pneumaticpush-buttonsafetyrelease•Features1-1/4”sheaveaxles•Featuresheavy-duty3/8”aircraftcable

•Internal“anti-sway”sliderblocks ineachcolumn•Electric/hydraulicpowersystem•Oversizedsheavediameters•Rugged,self-lubricatingcablesheaves•Multi-positionsafetylocksincolumns•Dual-positionpowerunitlocations

•Redundantslack-cablesafetylatches•Fullyadjustablelocklevelingstops•Drivethroughrampsoptionavailable•36”approachrampsavailable•Durablepowdercoatfinish•Ruggedsteelconstruction•High-speedlifting

HD-7500BLXBoat Storage


Width - 132” / Length - 224”


Width - 132” / Length - 224”

HD-7500BL

HD Series Features & Specifications


HD-7500PBXBoat Storage

Jack Platform

Options/AccessoriesACCESSORIES:

Aluminum Deck Drip TraysRJ-45 Rolling Bridge JackCaster Kit

4 Post Optional Accessories


Caster KitFits HD-7 & HD-9 Series

JP-6 Jack Platform WSA-100Air Electric Work Station

Aluminum Approach Ramps Extended Aluminum Approach Ramps

Extended SteelApproach Ramps

Solid Aluminum Decks

RJ-45Rolling Bridge Jack

JP-3 Jack Platform

4-Post Light-DutyHD Series Features & Specifications

•Freestandingorbolt-downdesign•Runwaysfeaturenon-skidsurface•Singlehydrauliccylinderunderramp•Fullyenclosedliftingcables,safety locksandsheaves•Pneumaticpush-buttonsafetyrelease•Features1-1/4”sheaveaxles

•Internal“anti-sway”sliderblocks ineachcolumn•Featuresheavy-duty3/8”aircraftcable•Longerrampsforlowground clearancevehicles•Oversizedsheavediameters•Rugged,self-lubricatingcablesheaves

•Multi-positionsafetylocksincolumns•Dual-positionpowerunitlocations•Redundantslack-cablesafetylatches•Fullyadjustablelocklevelingstops•Drivethroughrampsoptionavailable•36”approachrampsavailable•Perfectforparking,storageandservice

HD-9STNarrow Standard


Width - 99.75” / Length - 200”

HD-9STXNarrow Tall Long


Width - 99.75” / Length - 224”

HD-9Wide Standard


Width - 110.25” / Length - 200”

HD-9XWWide Tall Long


Width - 110.25” / Length - 224”

SERIES FEATURES:

HD-9XLWide Standard Long


Width - 110.25” / Length - 224”


HD-9SWXDouble Wide Tall Long


Width - 202” / Length - 224”

ACCESSORIES:

HD-9SWDouble Wide Standard


Width - 202” / Length - 200”

Jack Platform Aluminum Deck Drip TraysRJ-45 Rolling Bridge JackCaster Kit

• Push button pneumatic safety release

• Electric/hydraulic power system

• Optional power unit locations

Longer approach ramps

Optional rolling bridge jacks

HD-9 Series

Rugged 1-1/4” roller axles

• Heavy-duty 3/8”aircraft cables

• Multi-position safety locks

Adjustable lock ladders

Independent backup slack-cable safety latches

Oversize self-lubricating cable sheaves

See it on the BendPak / Ranger YouTube Page


4-Post Heavy-DutyHDS Series Features & Specifications

•Adjustablerunwaywidths•Singlehydrauliccylinderunderramp•Fullyenclosedliftingcables,safety locksandsheaves•Pneumaticpush-buttonsafetyrelease•Featuresheavy-dutyaircraftcable•Runwaysfeaturenon-skidsurface

•Internal“anti-sway”sliderblocks ineachcolumn•Longerrampsforlowground clearancevehicles•Oversizedsheavediameters•Rugged,self-lubricatingcablesheaves•Featuresheavy-dutysheaveaxles

•Multi-positionsafetylocksincolumns•Dual-positionpowerunitlocations•Redundantslack-cablesafetylatches•Fullyadjustablelocklevelingstops•Drivethroughrampsoptionavailable•48”approachrampsavailable•Customizablepowerunitlocation

HD-14TSuper Tall


Width - 126” / Length - 234”

HDS-14Standard


Width - 130” / Length - 241”

HDS-14XExtended Length


Width - 130” / Length - 271”

HDS-18


Width - 154” / Length - 241”

HDS-27


Width - 154” / Length - 297”

HDS-27X


Width - 154” / Length - 357”

HDS-35


Width - 154” / Length - 297”

SERIES FEATURES:

HDSO-14Open Front Plain Deck

Lifting Capacity - 14,000 lbs. Max. Lift - 70” / Runway Length - 199”

Width - 143” / Length - 244”

HDS-18X


Width - 154” / Length - 357”


HDS-40X


Width - 154” / Length - 357”

HDS-35X


Width - 154” / Length - 357”

HDS-40


Width - 154” / Length - 297”


Width - 154” / Length - 297”

DP-30 Rolling Oil Drain Air / Electric Work StationRolling Bridge Jack

• Adjustable height locking positions

• Stainless steel lifting cables

• Spring-loaded safety locks Integrated flow restrictor

Rolling Bridge Airline Kit

Greasable sheave pins

Non-skid runwaysWide ramp surface

Optional bridge jack

Redundant slack cable safety lock

Maintenance-free electric hydraulic power system and conveniently push button safety lock release

Large diameter cable sheaves

HDS-18E


ACCESSORIES:

Alignment LiftsHDS Series Features & Specifications

•Runawaysadjusttodifferentwidths•Multiauto-levellockingpositions•Singlehydrauliccylinder•Fullyenclosedliftingcablesandsheaves•Pneumaticpush-buttonsafetyrelease•Heavy-dutyaircraftcable•Runwaysfeaturenon-skidsurface

•Self-lubricatingcablesheaves•Oversizedsheavediameter•Featuresheavy-dutysheaveaxles•Fullyadjustablelockstops•Drivethroughrampsavailable•Rollingbridgeairlinekitavailable•Rollbackkitavailable

HDS-14LSX

HDS-14LSXE

SERIES FEATURES:

HD-9AE

HDS-18A

HDSO-14LSXOpen Front

HDS-27A

Max. 2 Wheel Align. - 212” / Max. Lift - 70”Capacity - 14,000 lbs. / Runway Length - 229”

Width - 130” / Length - 271”


Width - 130” / Length - 241”


Width - 154” / Length - 241”


Width - 127” / Length - 224”


Width - 143” / Length - 244”


Width - 154” / Length - 297”

Equipped with rear slip plates and galvanized front turn plates

Courtesy of Jay Leno’s Big Dog Garage

HDS-18XA


Width - 154” / Length - 323”


HDS-35A HDS-35XA

HDS-18EAShown with rolling bridge jacks

Durable powder coat finish

• Single hydraulic cylinder

• Simple push-button lock release

• Maintenance-free power system

• Easy-to-reach operator controls Non-skid approach ramps

• Adjustable height locking positions

• Stainless steel lifting cables

• Spring-loaded safety locksDual-hub cable sheaves

Full floating galvanized turn plates

Non-skid runways

Recessed full floating slip plates

Optional bridge jack

Integrated hydraulic flow restrictor


Width - 154” / Length - 357”


Width - 154” / Length - 297”


Width - 154” / Length - 297”

DP-30 Rolling Oil Drain Air / Electric Work StationRolling Bridge Jack Rolling Bridge Airline Kit

HDS-27XA

Max. 2 Wheel Align. - 271”/ Max. Lift - 60”Capacity - 27,000 lbs. / Runway Length - 323”

Width - 154” / Length - 357”


ACCESSORIES:

© 2011 BendPak, Inc. • BendPak, Inc. is a registered trademark.

This is my BendPak

There are many, but this one’s mine.

“Nothing I do or drive is stock. Everything that comes out of my shop has to be the best. That’s why me and my crew use BendPak products to customize every vehicle we touch. It’s a name I trust.”

– Jesse James, West Coast Choppers www.westcoastchoppers.com

19To see more images, follow us on Instagram @bendpak

Quatra ScissorsXR Series Features & Specifications

•12,000lbs.liftingcapacity•Extendedrunwaydesign•Durablepowdercoatfinish•Multi-positionrunwayworksteps•Non-skidrunwaysforsuregrip•Electric/hydraulicpowersystem•Integratedvelocityfusesforcylinders

•Powerconsolewithsimplecontrols•Opencenterdesign•Quadautomaticsafetylockswith pneumaticpush-buttonrelease•Lubricatedbearingonallpivotpoints•Ruggedsteellegs•Canbeflushmountedorrecessed

•Easytouseandunderstand•Highefficiencyhydraulicpowerunit•Equippedwithrearslipplatesand galvanizedfrontturnplates•Straightupverticallifting•Multi-positionautomaticlevelingsystem•Easyaccesstocomponentsforservicing

XR-12000AAlignment

SERIES FEATURES:

Rugged steel legs and formed steel runways

Multi-position automatic leveling system

Cylinders feature integrated velocity fuses to control sudden decent

Full floating recessed slip plates

Multi-position runway work steps

Extendable, hinged, collapsible, and stowable approach ramps

Easy access to electrical /hydraulic components with easy to use and understand operator controls

Grease fittings on all moving pins and bearings

MODEL XR-12000AAlignment

XR-12000Standard

LiftingCapacity 12,000lbs. 12,0000lbs.

OverallWidth 88” 88”

OverallLength 281.25” 257.75”

RunwayWidth 24” 24”

LengthofRunways 219.5” 193”

Max.2-WheelAlign. 194” N/A”

Max.LiftingHeight 75” 75”



Durable powder coat finish will provide years of protection

Lubricated-for-life bearings on all pivot points

DP-30 Rolling Oil Drain Air / Electric Work StationRolling Bridge Jack Rolling Bridge Airline Kit

Collapsible front tire stops clear for low vehicle skirts and alignment instrumentation

Full floating recessed galvanized turn plates

Non-skid runways for sure grip

Open center design

Optional RJ-6 6,000 lb. capacity rolling bridge jack

XR-12000Standard Deck


ACCESSORIES:

Low-Rise & Mid-RiseScissors Series Features & Specifications

MD-6XPMid-Rise Portable

Adjustable Arms Capacity - 6,000 lbs.

Height Range - 4.75”- 48”

LR-5TLow-Rise

MDS-6KMid-Rise Scissor

Lift Pad Dimensions - 24”x 53” Capacity - 10,000 lbs.

Height Range - 4”- 22.75”

Lift Pad Dimensions - 19” x 58” Capacity - 6,000 lbs.

Height Range - 5”- 45.5” (48.5” with Blocks)

STANDARD FEATURES:

Portable ModelsMobile Power Cart

SP-7X & All Low-Rise Models1.5 inch Rubber Lift Blocks

MD-6XP ModelMulti Piece Adapter Set


MD-6XP

Multi piece adapter set

Safety lock bar with multiple lock positions

Perfect for light-duty trucks and cars

Adjustable arm assemblies

Portable motor cart serves as tow handle

Twin hydraulic cylinders

Durable powder coat finish

Solid steel torsion bar

Comes standardwith rubber lift blocks

Comes standardwith adapter set

Comes standardwith 8 pc. adapter set

1.5” Rubber Lift Blocks 6” Rubber Lift Blocks LR-4A Arm Kit3” Rubber Lift Blocks

LR-60Low-Rise

Lift Pad Dimensions - 18” x 52”Capacity - 6,000 lbs.

Height Range - 4”- 26”

P-6FBOpen Center Pit Lift

Flush Mount



P-6BOpen Center Pit Lift



LR-60PLow-Rise Portable



ACCESSORIES:

XR-12000Full-Rise Open Center


Width - 88” / Length - 257.75”

Courtesy of Northwest Auto Salon

SP-7XFull Rise

Lift Pad Dimensions - 21.5” x 63”- 70”Capacity - 7,000 lbs.








P-6FB

GALLERY:

Parking & StorageParking Series Features & Specifications

SERIES FEATURES:

Light-Duty•Perfectforcars&lighttrucks•Singlehydrauliccylinder•Dependablehydraulicdesign•Easyoperation&simplecontrols•Electric/hydraulicpowersystem•Automaticsafetylocks

Heavy-Duty•Widebase-plateformaximumstability•Vehicledecksaccomodatemost passengercarsandlightdutytrucks.•Heavy-dutysteelconstruction•Built-inwheelstops•Two-positionfailsafelockingsystem

PLT-6S

Capacity - 6,000 lbs.Rise - 62.9” / Deck Length - 135”Width - 98.3” / Length - 153.5”

PL-18000

Capacity - 6,000 lbs. Per DeckOverall Height - 364” / Deck Length - 155”

Width - 114” / Length - 189”

HDS-35PX

Capacity - 35,000 lbs.Rise - 168” / Deck Length - 398.5”

Width - 185.5” / Length - 456”

PL-14000 PL-14000XL


Width - 114” / Length - 193”


Width - 114” / Length - 215”

PL-7000XR

Capacity - 7,000 lbs.Rise - 85” / Deck Length - 157.5”

Width - 98” / Length - 173.5”



PLT-6S

PL-14000

GALLERY:

Wide-base plate mounts directly on ground or asphalt

• Overhead power unit provides smooth quiet hydraulic operation

• Power unit and controls integrated within the lift structure

• Automatic safety lock

Designed for installation on typical parking surfaces

Maintenance-free composite carriage bearings and self-lubricating chain rollers

Wide deck platform accommodates pickups, vans, and cars

Heavy-duty lifting chains

User-Friendly Controls

PL-7000XR

Minimum footprint allows multiple installations in limited space


Rolling Bridge JacksOptional 4-Post Accessories

•4,500-25,000lbs.liftingcapacity•Versatiledropinliftingpads•Multi-pieceadaptersetstandard•High-pressurehydraulicpowerunit•Stackableadapters•Automaticsafetylocks•Threesafety-lockpositions

•Rubberliftingpadsorsteellifting padscomestandardoroptional•Optionalair-linekit•Raise2or4wheelsofftherunways•Telescopingrollerdesignallowsthe runwaystobeadjustedfordifferent treadwidths

Mobile Lift Features & Specifications

SERIES FEATURES: SERIES FEATURES:

RJ-45Rolling Jack

Lifting Capacity - 4,500 lbs.Lift Pad Reach - 41”- 60”Frame Reach - 36”- 47”


Lifting Capacity - 15,000 lbs.Lift Pad Reach - 29 ”- 59”Frame Reach - 46”- 59”

Lifting Capacity - 18,000 lbs.Lift Pad Reach - 40”- 64”

Frame Reach - 45”

Lifting Capacity - 25,000 lbs.Lift Pad Reach - 40”- 64”

Frame Reach - 45”

RJ-45




RJ-6Rolling Jack

RJ-7Rolling Jack

RJ-9Rolling Jack

RJ-25Rolling Jack

RJ-15Rolling Jack

RJ-18Rolling Jack

Portable Column LiftMobile Lift Features & Specifications

•18,000-lb.individualcolumncapacity•108,000-lb.maximumsystemcapacity•SINGLE,PAIRorTEAMoperation•Three30’cablesareusedleavingthe frontorbackoftheliftclearofcables•Self-diagnosticsandself-calibration•Controlsystemsfeature24-voltcircuitry

•Variableheightlimitsettings•Two-speedloweringoptionsettings•Equippedwithawarninglightand audiblealarmforcriticalwarningalerts•Emergencyshutoff’soneachcolumn•Keylockenclosureoneachcolumn•Electronicsaremulti-fuseprotected

•Enclosedelectric-hydraulicpowersystem•Pallet-jackstylesteeringwheels•Extendedforksaccommodatewide tiresanddeepwheelconfigurations•Multi-widthwheelforkswithlockingpins•Tandem8”diameterpolyurethane coveredsteelwheels

SERIES FEATURES:

PCL-18

Column Capacity - 18,000 lbs.System Capacity - 108,000 lbs.

Lifting Height - 71.5”

Easily roll over dirt and debris

• SINGLE, PAIR or TEAM operation

• Rabbit or Turtle lowering speeds

• Multi-fuse protected

Emergency shutoffs on each column

*Can be configured in sets of 4 or 6

Multiple, automatic, independent safety locks spaced every 4 inches

Warning light and audible alarm

Multi-width wheel forks with locking pins

Durable powder-coat finish

Pallet-jack style steering wheels

30 ft. cables

PCL-18


Pipe BendersBender Series Features & Specifications

•3-1/2”Min.bendingradius•5”Max.bendingradius•Canisterstylehydraulicfilter•5Hp/208-230VACmotor•Manualorautomaticcontrols•Drop-inswagingcollars•Twistlocktooling

•ANSI92.2Cylinders•Quickreleasebendingdies•Bendingheadstowithin.002”•Bendingandendfinishingoperation•Adjustablebackgatepressure•180ºbendingcapacity•Onepiecesolidsteelbarrel

•Directdrivehighspeed4GPMpump•Tooltrays•Largefluidreservoir•Filteredhydraulicsystem•Oilsightgauges•1/2”highpressurehose•Widevarietyoftoolingavailable


1302BA-2021302BA-302

Bending Controls - Digital AutomaticClampless Swager - Internal Expander

202 or 302 Die Package Available

BB-1

Bending Controls - ManualClampless Swager - Internal Expander

BB-1 Die Package Available

SERIES FEATURES:

1302BAS-2021302BAS-302

Bending Controls - Semi-AutomaticClampless Swager - Internal Expander


BB-2

Bending Controls - ManualClampless Swager - Internal Expander

BB-2 Die Package Available

1502BA-2021502BA-302

Bending Controls - Digital AutomaticClampless Swager - Internal Expander


1502BAS-2021502BAS-302

Bending Controls - Semi-AutomaticClampless Swager - Internal Expander


BB-1 / 202 Economy Die PackageBending and End Forming Tooling

Sizes - 1-1/2”- 1-3/4”- 2”- 2-1/4”- 2-1/2”

BB-2 / 302 Economy Die PackageBending and End Forming Tooling

Sizes - 1-1/2”- 1-3/4”- 1-7/8”- 2”- 2-1/4”- 2-1/2”

BB-1 / 202DIE PACKAGE

BB-2 / 302DIE PACKAGE

300-1 Die Package Card System CD300-2 Die Package Rotation DialSpecialty ToolingAvailable Upon Request

BB Series / 1302 SeriesTop View

1502 SeriesTop View

BAS Semi-Automatic Controls

BA Digital Automatic Controls


ACCESSORIES:


Air CompressorsLS Series Features & Specifications

•80-Gallonverticaltank•3-Cylinder/2-stagepump•ASMEratedtank•Siemens™electricmag-starter•Fan-typeflywheel•Fully-enclosedbeltguard•Oversizedrollerbearings

•Forgedductileironcrankshaft•Forgedaluminumalloypistons andconnectingrods•100%castironblock•Castironcylindersandheads withdeepcoolingfins•Forced-airaftercooler

•Oilsightgauge•Automaticpressureswitch•ASMEratedoverloadpressure safetyvalve•Pressuregaugewithvalve•Oversizedreplaceableairfilters•Automaticstart/stop

SERIES FEATURES:

The100%cast-ironTRI-MAX™Seriespumpfeaturessimple

splashlubricationfortotalreliabilityanda“W-3”finned

cylinderconfigurationthatprovides360°cooling.LowerRPM’sand

large-diameterfinnedcoppertubingbetweenstages,means

theywillruncooler,whichultimatelyachievesmaximum

compressorefficiencywithlessmoisturecontamination.


Cast iron heads

Large mass-air filters

Large “Finned” copper tubing helps keeps air cool between stages and to tank

5 HP MODELS

LS580V-601 / 208-230 V / 60 Hz / 1 PhLS580V-603 / 208-460 V / 50-60 Hz / 3 Ph

Horsepower - 5 HpMaximum CFM - 22.8 / 175 psi

7.5 HP MODELS

LS7580V-601 / 208-230 V / 60 Hz / 1 PhLS7580V-603 / 208-460 V / 50-60 Hz / 3 Ph

Horsepower - 7.5 HpMaximum CFM - 28.5 / 175 psi

Deep cooling fins on the cast iron cylinders help maintain a lower operating temperature

Oversized balanced flywheel features large fan blades that forces cool air on the compressor pump

Pump cutaway

Moisture Minder® Kit Anti-Vibration PadsMoisture Minder®

ACCESSORIES:


Forged aluminum alloy connecting rods

Fully-enclosed belt guard

American made motor

Siemens™ UL approved electric mag-starter

Wide base

Integrated tank drain

Oil site gauge

TriMax™ ReciprocatingAir Compressors ASME rated overload pressure safety valve

Pressure switch automatic start/stop

Oversized tapered roller bearings

100% cast iron pump

Forged aluminum alloy pistons

ASME rated 80 gallon tank

Power UnitsAC Power / 110 - 230 Volts / Vertical Mount

Ranger™AChydraulicpower-unitsareself-contained,dependablesourcesofhydraulicpowerthatcomestandardwithanabundanceoffeaturesandbenefitsinadurableandeconomicpackage.ThesehighqualitypowerunitsareidealforindustrialACapplicationssuchasautolifts,manlifts,elevatedworkplatforms,scissorlifts,docklevelers,conveyors,packagingmachines,machinetools,compactors,crimpingmachines,presses,roboticequipment,tailgatelifts,dumpbodies,cabtilts,emergencybackupunits,snowplows,log-splitters,harvestingmachinery,liftplatforms,scaffolds,presses,wastecompactors,carlifts,medi-calfieldanddentalfieldlifts,andmore.


E0.2B8F1Power Unit

E3.7K3H2Power Unit

E1.2B8F1Power Unit

F3.2G3H1Power Unit

E2.1F3H1Power Unit

F2.1F3H1Power Unit

Gal Reservoir - 1.6 / PRV - 1900Motor - 1.5 HP / 110-230V-50/60-1PH

UL/ETL Listed


CE Listed


UL/ETL Listed


UL/ETL Listed


UL/ETL Listed


UL/ETL Listed

• UL / ETL Listed (except model E1.2B8F1)

• Vertical Design

• Built-in throttle and buffer valves reduce pre-load pressure

• Integrated fixed-setting pressure relief valve

• Submerged pump

• Spare pressure port

• Multi-hole adapter plate adapts to a wide variety of mounting applications

• Suction-strainer

• Breather and fill-cap

• Hardened-allow pump end plates for unmatched durability in demanding environments and severe duty applications

FEATURES:

QuickJackShop Equipment / Portable Jack Frame System

TheQuickJackwasdevelopedspecificallytoaddresstheshortcomingsthathaveplaguedtheracecircuitandDIYmarketfordecades.Gettingcarsoffthegroundshouldn’tbesuchachore.Wastingtimegettingcarsintheairmeanslesstimewrenching,andatthetracksecondsseparatewinnersfromlosers.TheQuickJackportableliftingsystemmakesvehiclemaintenanceonthetrackandoffconvenientandlightningfast.TheQuickJackcangoanywhereandcanbeeasilystowedinthetrunkorbackseatofmostcarswhennotinuse.Bringittothetrackordropitonyourgaragefloortoperformroutinemaintenanceinthecomfortofyourhome,allinseconds.Formoredetailsvisitwww.quickjack.com.PATENTPENDING.AllRightsReserved.

33For full product details and specifications, please visit www.quickjack.com

BL-3500

BL-5000

Capacity - 3,500 lbs. / PairHeight - 3”- 16.75” / Lifting time - 10 sec.

Individual Frame Weight - 45 lbs.

Capacity - 5,000 lbs. / PairHeight - 3”- 18.5” / Lifting time - 15-30 secs.

Individual Frame Weight - 65 lbs.

QUICKJACK ™

By Ranger Products

(4) Ea. 1.5” x 3” x 4” Rubber Blocks (4) Ea. 3” x 3” x 4” Rubber Blocks

(2) Ea. 150” Hydraulic Hoses (2) Ea. 14” Aux. Hoses

(1) Ea. Mini Hydraulic Power Unit110V-AC StandardIncludes pendant control(Optional 12V-DC available)

Includes:

(2) Ea. Quick-Mount Handles

(2) Ea. Jack Frame Assemblies




* Measurements for BL-3500* Measurements for BL-5000

34

Wheel ServiceTire Changers Features & Specifications

TM

SERIESRanger’s NextGen™ Tire Changers - Tire Shop Tested™

AllNextGenmodelsareloadedwithdesignenhancementsthatmakethetechnician’sjobeasier.Sturdyframes,rigid45mmhexagonalverticalshafts,andhardened-steelhorizontaloutriggersupportarmseliminateflexduringalltireserviceproceduresreducingthechanceofdamagetoexpensivewheels.BeadseatingandtireinflationissimpleandeffortlesswithRanger’sexclusiveTurboBlast™portablebeadseatingsystem.High-torqueelectricturntables,increasedspeedandreversibledirectionmeansquickertireremovalandinstallation.Industrial-gradepneumaticcontrolvalvesfeaturediecastandmachinedbodiesconstructedfromzincandaluminumforincreasedservicelifeandperformanceatthehighestlevelpossiblewithinalmosteveryimaginableworkingcondition.Importantwheelserviceaccessoriescomestandardlikealargesoapbucketwithbrushandamulti-pieceplasticwheelprotectorkitthatincludesturntablejawcovers,bead-breakerbladebootsandspecializedmount/demountheadcoverstohelpprotectdelicatewheels.

For full product details and specifications, please visit www.bendpak.com

R980AT/ATF Swing-Arm

Power Assist

Internal Clamping - 10”- 30”External Clamping - 9”- 28”

Maximum Tire Diameter - 50”

R745Swing Arm

Internal Clamping - 12”- 21”External Clamping - 10”- 18”Maximum Tire Diameter - 36”



R980XR/XRFSwing Arm






R26FLTTruck Tire Changer

Drive System - Electric / HydraulicMaximum Rim Diameter - 14”- 26”


R980NXT/NXTFSwing Arm

Power Assist

R30XLT/XLTFSwing Arm

Power Assist

R76ATR/ATRFTilt-Back

Power Assist



R76LTTilt-Back


R80DTXFLeverless

Tire Changer

35

Reduction /Extension Clamps

Wheel Protector KitComes Standard

Light & Medium TrucksAdapter Set

Truck Cone KitRWS-1TC-1

RWL-150T Wheel LiftFits R980XR/NXT & R30XLT


TM

SERIES See it on the BendPak / Ranger YouTube Page

R80DTXFLeverlessTire Changer

Fully adjustable wheel clamps

TurboBlast™ bead seating system

Up-front ergonomic controls

Dual lower bead lifting discs

Wheel positioning and restraint device

Multi-profile traveling drop-center tool

Bi-lateral bead loosener with hand control operation

Dual power drop rollers help keep beads in position through the entire mounting procedure

Tilt-back tower design

Automatic leverless bead lifting tool

Convenient foot operated controls Tire iron slot

ACCESSORIES:

Wheel ServiceWheel Service Features & Specifications

•Simple,one-manoperation•Heatstread,shoulderandsidewall•Curesthepatchesandinnertirelining•Rotatingadjustableframe•Adjustableheighttower•Contouredinnerandoutercuringheads•Availableinlowandhighvoltage

•Adjustableheighttirespreader•Air-powered•Perfectfortireinspectionandrepair•Heavy-dutyrollersallowtirestorotatefreely•Heavysteelconstruction•Wide-basedesignforstability•Powdercoatfinish

Optional Truck Adapter Kit DST-2420 FEATURES:

TS-150Tire Repair Wheel Lift

Wheel Lift Tire SpreaderAdjustable Height Lifting

Adjustable Spreader Forks

Heated Tire Repair / Tread & SidewallsRotating Adjustable Tower

Dimensions - 57” x 22” x 14”

Fully Equipped Multi-Piece SetAccommodates Medium &

Full Size Trucks

Safety shield comes standard

RL-8500 / RL-8500XLT (not pictured)Combination Brake Lathe Package

Work bench with large tool storage boards

Standard arbor provides a multitude of tooling choices

Tool tray for your convenience

One cut micro-finish with our micro dial twin tool cutters

Infinitely variable spindle and cross feed settings

Rugged cast iron body

Chip funnel and chip catcher

Durable dual work lamps

TS-150 FEATURES:

RV-80L / RV-80HTire Vulcanizer

Brake LatheTruck Adapter Kit

Fully equipped tool package comes standard See it on the BendPak / Ranger YouTube Page

RV-80L / H FEATURES:

Maximum Rotor Thickness - 2.5” Maximum Rotor Diameter - 17”


Oursuper-dutytrucktoolingpackageforRangerbrakelathesconsistsofanupgraded1-7/8”arborandawidevarietyofadapters.Thisenormoussetallowsyoutoexpandthecoveragetohandlevirtuallyanyvehiclethrough1-tontrucks.FitsRangerbrakelatheswith1”arbor

•Dynamic,Static,andPerformance Alloysettings•Automaticround-offwithtop-dead- centerweightpositionindicator•Hardened-steel36-mmshaft•Quick-releasehubnut•Multi-usersavefunction

•PrecisionDataWand™andinnerdataarm•LowRPMbalancingspeedand rapidsix-secondcycletime•Automaticbraking•LEDinnerwheeltargetlight•Manualorautomaticstart•Selfcalibrationfunction

•Anergonomiccontrolboardand easy-to-readLEDdisplay•Highlyprecise64-bitarchitecture•Perfectlybalancedvibration-free counterweightedflywheelbeltdrive•Auto-stopfunction,electromagneticpulse combinedwithpneumaticbraking

DST-2420 FEATURES:

RB24TTruck Wheel Balancer

Max. Wheel Diameter - 30”Max. Tire Diameter - 50”

Max. Tire Weight - 400 lbs.

Tool tray for your convenience

DST-2420Wheel Balancer

RB24T FEATURES: TS-150 FEATURES:DST64T FEATURES:

DST-64TWheel Balancer with

DataWand™ Entry

CRT380RWireless Wheel Aligner

Self-centering wheel-clamp adapters

Cordless Bluetooth® sensors remove the hassle of connecting cables

“Before” and “after” measurements can be printed

Superior screen graphics with vibrant animation

Visual vehicle adjustment help

Technician has the option to customize units of measurement, accuracy, language, etc.

Customer information can be stored in the database, for quick reference of previous work orders

Max. Wheel Diameter - 10”- 30”Max. Tire Diameter - 47”


Max. Wheel Diameter - 10”- 30”Max. Tire Diameter - 50”



Jacks & LiftingLifting Features & Specifications

RFJ-2TX

Capacity - 4,000 lbs.Height - 3.5”- 31.5”Chassis Length - 37”

RFJ-214T

Capacity - 4,500 lbs.Height - 5”- 19.25”

Chassis Length - 26”

RFJ-3TQP

Capacity - 6,000 lbs.Height - 5”- 19.75”

Chassis Length - 25.5”

RFJ-3TP


RFJ-3000LPF

Capacity - 3,000 lbs.Height - 2.75”- 24”


RFJ-3000AL RFJ-4000AL



INFORMATION: GALLERY:

RFJ-6HD

Capacity - 6,000 lbs.Height - 3.625”- 21”Chassis Length - 27”

Ranger’swide-arrayofmulti-purposefloorjacksjustkeepsgettinglargerandmorediverse.Ourcurrentlineoffloorjackshasmaximumcapacitiesrangingfrom2,000to55,000lbs.andcomeinavarietyofstyleslikequick-pumpandlow-profile.Nomatterwhichoneyouchoose,Rangerfloorjacksofferincredibleliftingpowerandtopnotchconstructionthatyoucancountontoneverletyoudown.Ourimpressivelineoffloorjacksiscarefullydesignedtoaccommodateawidespectrumofweightcapacitiesandliftingapplications,easilyliftingjustaboutanythingthatneedsservice.


RFJ-3000LPF

RBJ-25TL

Capacity 1st Stage - 55,000 lbs.Capacity 2nd Stage - 20,000 lbs.

Height - 7.125”- 14.75” / Chassis Length - 30”

RFJ-10TL

Capacity - 20,000 lbs.Height - 7”- 23”


RFJ-3T


RTJ-1


Height - 37”- 73” / Base - 39” x 39”

RTJ-1100

Capacity - 1,100 lbs.Height - 45”- 72”Base - 24” x 24”

RTJ-3000


Height - 37”- 79.5” / Base - 45” x 45”

RFJ-4000AL

GALLERY:


Jacks & Lifting

•Weldedsteelconstructionfor maximumdurability•Safetyratchetdesignassuresstands remainlockedunderload•Perfectforholdingdrive-trainor exhaustcomponentsinposition•Soldinpairs

•Quickadjustspinhandlewiththrustbearing•Widebaseprovidesmaximumstability•Thick,rubberadjustablepadfor maximumsupport•Convenienthandleandcolumnrelease•HardenedACMEscrewforeasyadjustment•Tripoddesignevenlydistributesweight

•Pneumaticoperatedwheellift•One-handed,levercontrolled•Heavy-dutysteelcasters•Bearingmountedslider•Stabilizesvehiclesraisedonlifts•Heavy-steelconstructionfor maximumdurability

SERIES FEATURES:

RJS-12T

Holding Capacity - 24,000 lbs.Height - 20”- 30.5”

Base Dimensions - 14.5” x 13”

RJS-6T

Holding Capacity - 12,000 lbs.Height - 15.5”- 24.5”

Base Dimensions - 9” x 10.5”

RJS-3T

Holding Capacity - 6,000 lbs.Height - 11.5”- 17”

Base Dimensions - 7” x 7.5”

RJS-1TF

RWL-150T


Base Dimensions - 12”

Lifting Capacity - 150 lbs.Pneumatic Operation

Fits R980XR/NXT & R30XLT

RJS-1T


Base Dimensions - 12”

MLS-18

Holding Capacity - 18,000 lbs.Height - 48.75”- 74.5”Base Dimensions - 32”

SERIES FEATURES:

RJS-2TH

Holding Capacity - 4,000 lbs.Height - 55”- 87”

Base Dimensions - 24” x 24”

Lifting Features & Specifications Lifting Features & Specifications


RWL-150T

RML-1100RML-1500XLSuper Stretch

Lifting Capacity - 1,100 lbs.Height - 3.5”- 16”

Top Dimensions - 6”- 17.75”

Lifting Capacity - 1,500 lbs.Height - 7”- 45” / Table Width - 30”- 53”

Table Length - 89”- 102”

•Constructedoutof12-gaugesteel•Pneumaticliftingcylinder•Durablepowder-coatfinish•Adjustablefrontwheelvise•Drop-awayrearwheeldeck•Easyramp(s)removal•Frontandsideextensionsstandard

•Built-inretractableswivelcasters•Fulltravelautomaticsafetylocks•Singlehydraulicliftingcylinder•Sidedeckscanbeeasilyremoved•Diamond-plateapproachramps•Airorhydraulicpumpoperation•Multiplelockingpositions

SERIES FEATURES:

RML-600XL

Lifting Capacity - 1,000 lbs.Height - 7”- 31.5” / Table Width - 24”- 44”

Table Length - 79”- 98”

Motorcycle LiftsLifting Features & Specifications

RML-1500XLSuper Stretch

Heavy 12-gauge steel construction

Approach ramp extension

Air or hydraulic pump operation

Rear support poles

Retractable real wheel deck

Full travel automatic safety locks

Single hydraulic lifting cylinder

Side Extensions

Extended platform length

Built-in retractable swivel casters can be moved when loaded

RML-1100Optional Jack Stand


Tool Storage & BenchesBoxes & Benches Features & Specifications

RTB-2D

Number of Drawers - 2Unit Dimensions - 26.25” x 10.5” x 12.25” Mates with RTB-9D / RTB-7DC / RTB-10D

RTB-13DC

Number of Drawers - 13Unit Dimensions - 47.5” x 40” x 19”

Mates with RTB-8D / RTB-8DT

RTB-7DC

Number of Drawers - 7Unit Dimensions - 29” x 40” x 18”

Mates with RTB-2D / RTB-9D / RTB-10D

RTB-9D


Mates with RTB-2D / RTB-7DC

RTB-8DT

Number of Drawers - 8Unit Dimensions - 41.5” x 19” x 18.5”

Mates with RTB-13DC

RTB-8D

Number of Drawers - 8Unit Dimensions - 41.5” x 19” x 18.5”

Mates with RTB-13DC

RTB-10D


Mates with RTB-2D / RTB-7DC

INFORMATION:RangerToolboxesandtoolchestsaregainingpopularitybythedayinautomotiveshopsandprivategarages.That’sbecauseourtoolstoragesolutionsarebuilttothestrictestspecifications,featuringhigh-grade16and18-gaugesteelconstruction,durableinternalcages,high-qualitywelds,allthebestdrawerhardwareandamasterfulcherry-redpowdercoatfinishthatlooksbetterthananystockpaintjobonthemarket—andit’lllastforevertoboot.

Withoutquestion,foryourprojectstogetcompletedontimeandtoyoursatisfaction,yourequireadedicatedworkarea.SoRangerdevelopedalineoflarge,heavy-gaugesteelworkbenches,specificallydesignedtohandlethephysicalrigorsofbeinginabusygarageorshop.Wecurrentlyofferthreesizesandstylestosuityourneedsandspacerestraints.


RWB-1TD

Height - 40”Width - 48”Depth - 32”

RWB-2S

Height - 34.5”Width - 79”

Depth - 25.25”

RWB-2D

Height - 34.5”Width - 59”

Depth - 25.25”

•Electrostatictriple-bakedprotectivepowdercoat•Rollededgesforaddedstrengthandrigidity•Full-extensionballbearingdrawerslides•Tumblerkey-lockpivotdrawerlatchingsystem

•Glossyredfinish•Electrostaticoven-bakedpowdercoat•Rollededgesforaddedstrength andrigidity•5/32”HDrollededgesteeltabletop•3/32”HDrollededgesteelshelves•12-gaugeconstruction

•Lockableheavy-dutydrawer•500-lb.workingcapacity•Heavy-duty4”casters•Adjustableworkingheight•Removablepolyethylenefluiddrain•14-gaugetabletop•3/4”liquidcontainingrim

RWB-2D FEATURES:

Rolled edges for added strength and rigidity

Protective rubber mat

Chrome side handles

Brushed aluminum drawer handles

2 heavy-duty fixed urethane casters and 2 heavy-duty swivel urethane casters with brakeElectrostatic oven baked

powder coat finish

Heavy-gauge steel body

Full-extension ball bearing drawer slides

RTB-8D / RTB-13DCShown as combo

RWB-2S FEATURES: RWB-1TD FEATURES:


Shop EquipmentShop Equipment Series Features & Specifications

RCD-1TDAuto Carts

Capacity - 1,000 lbs. (Each)Dimensions - 15.5” x 23.5”

3.5” Cast Iron Ball Bearing Casters

RP-20T

Capacity - 40,000 lbs.Cylinder Stroke - 8”

Width - 23” / Height - 59”

RP-10TPPorta Power

GoCart™Storage Rack

Capacity - 10 Tons / 20,000 lbs.Stroke Ram - 6”Hose Length - 6’

Load Rating - 200 lbs.Dimensions - 19” x 31” x 6”

Holds up to 4 GoCart™ Dollies

RCD-1VVehicle Dolly

RCD-1500GoCart™

Vehicle Dolly

Lifting Capacity - 1,500 lbs.Overall Height - 12”Caster Size - 4.5”

Load Rating Each - 1,500 lbs.Wheel Size Capacity - 8”- 24”

Tire Diameter Capacity - 15”- 28”

RP-20HD

Capacity - 40,000 lbs.Cylinder Stroke - 5.5”

Width - 37” / Height - 60.25”

SERIES FEATURES:

RP-20HD

Integrated 4” diameter 20-ton pressure gauge

Hydraulic cylinder moves laterally

Adjustable table height

INFORMATION:LetRangerProductslightentheloadwithourconsiderablelineofhigh-qualityrollingequipment.AllRangerCartsandDolliesaremadefromhigh-gaugesteelandemployonlythebestcastersforeasymaneuvering.Ourservicecarts,chassis-mountvehicledollies,low-profileautomobilecartsandrollingadjustableworktablescomefullyequippedtomakeyourdayinthegarageinfinitelyeasier.Don’tliftorcarry—rollwithRanger!

Ranger’sindustrialshoppressesofferyoutheversatilityofprofessional-gradehydraulicforce,whetheryou’reattheshoporinyourowngarage.Amongotheroperations,allRangerHydraulicPressesareidealfortheremovalandinstallationofgears,bushingsandbearings—soyoucanbend,straighten,flatten,crush,press,shape,push,pull,liftandspreadlikeyouwereborndoingit.

TM

TM

TM

TM

TM

TM


RH-50PL

Air Pressure - 300 psiHose Length - 50’

Fittings - 3/8”

RH-50SL


Fittings - 3/8”

RH-33SL


Fittings - 3/8”

RH-50PM

Air Pressure - 2,250 psiHose Length - 50’

Fittings - 3/8”

•Wall,floor,orceilingmount•Useforairorwater•Powdercoatedforcorrosion freeperformance•Solidbrassswivelfitting•Guidearmsadjuststo9positions•4-direction,non-snagrollers

•Multi-positionreleaseratchet•Anti-lockoutratchetmechanism preventsreelfromlockingupwhen hoseiffullyextended•Reinforcedmountingbase•Convenientlyrewindsitwithouthassle•Compact,space-savingdesign

SERIES FEATURES:

RH-50PL

Use for air or water

Solid brass swivel fitting

Wall, floor, or ceiling mount with a 7” x 8” reinforced mounting base

Anti-lock out ratchet mechanism prevents reel from locking up when hose is fully extended

4-direction, non-snag rollers


Shop Equipment

Oil Drains•Lightweightforeasyportability•Safeandeasytouse•Non-corrosivetelescopingtube•Heavy-dutystainlesssteelclamp•Built-inhandgrips•Durablesteelconstruction

•Toughconstructionwillresistdents, rust,andcorrosion•Ruggedfunnelwithbuilt-in contaminationscreenOil Filter Crushers•Reducescansupto20%•Reducesfiltersupto25%

•Crushescansinonly20seconds•100%airoperated•FulfillsEPAandothermandated environmentalstandards•Removesupto95%oftheoil•Compactfloororbench-mountdesign•All-steelindustrialconstruction

SERIES FEATURES:

RD-15

Capacity - 15 gal. Height - 8.5”

Shipping Weight - 52 lbs.

RD-18G

Capacity - 8 gal.Height - 47”- 63”Funnel Diameter - 17”

RP-20FCOil FilterCrusher

RP-6KCPaint Can

Crusher

Capacity - 3 Ton / Cycle Time - 15 - 20 sec.Air Requirements - 140 - 160 psi

Dimensions - 15” x 37” x 14”

RD-20SEAir EvacOil Drain

Capacity - 20 gal. Height - 52”- 83”

Funnel Diameter - 16”

RP-20FCSStand

Capacity - 230 lbs.Unit Weight - 72 lbs.

Dimensions - 27.75” x 42” x 17.75”

RD-8G

Capacity - 18 gal.Height - 48”- 72”Evacuation Pump


Capacity - 10 Ton / Cycle Time - 15 - 20 sec.Air Requirements - 125 - 175 psiDimensions - 17” x 29.5” x 17”

Shop Equipment Series Features & Specifications


RS-750SprayWash

Cabinet(Truck)

Load Capacity - 1,000 lbs.Tank Capacity - 53 gal.

Interior Dimensions - 32” x 54”

RS-500SprayWash

Cabinet

Load Capacity - 500 lbs.Tank Capacity - 50 gal.

Interior Dimensions - 43” x 32”

•Heavy-dutysteelconstruction•Removabletankscreen•Stainlessoilskimmer•Removablepartstree•Powdercoatfinish•Brassnozzles•Fullopeningoctagonaldoor

•Largedrainpipe•Heavy-dutyrubbercasters•Friction-driveturntablesystem•Gasket-freedoor•Smallpartsbasket•Stainlesssteelhandles•Freebucketofsoapincluded

•Non-foamingsoap•LowpH•Mildalkali•Watersoluble•Speciallyformulated•Removesgrease,oil,stains,carbon, protein,andsomepaints

RS-750

Quick release door latch

Heavy-duty rubber casters

Removable tank screen and parts tree

Stainless oil skimming system

Built-in tank drain

Automatic timer and safety door switch

Friction-drive turntable system

SOAP 20 LBS. / 50 LBS.

Low pHWater soluble

Non foaming soap

RS-500 / RS-750 FEATURES: SOAP FEATURES:



Shop Equipment

Bubble Balancer•Ruggeddie-castaluminumheadcone•Easytouseself-levelingstand•Built-inweight-storagecompartments•Self-aligning,spring-loadedcone•Hardenedcastpivotseat•Recessedcircularlevelbubble

Rolling Creeper/Work Seat•Paddedcentercushionandheadrest•Swivelcastersforeasymaneuverability•Relievessorebackmuscles•Workmoreefficiently•Sturdysteeltubingconstruction•Lowprofiledesign

Tire Changers•Rubbergriphandles•Perfectforhomeorshopuse•Portableandeasy-to-use•Heavysteelconstruction•Self-levelingstand•Efficientoperationatafractionofcost

SERIES FEATURES:

RST-1WSRolling Work Seat

Steel Tubing - 1”Swivel Casters - 2.5”

Relieves sore back muscles

RST-1CRolling Creeper

Weight Capacity - 350 lbs.Steel Tubing - 3/4”

Swivel Casters - 2.5”

RWS-3TCManual Tire Changer

Tire Capacity - 8”- 7.5” x 16”Wheel Plate Diameter - 7.5”Base Dimensions - 15” x 18”

RWS-2TCMini Tire Changer

Tire Capacity - 4”- 12”Shipping Weight - 14 lbs.

Shipping Dimensions - 22” x 7” x 6”

RWS-1BBubble Wheel

Balancer

Hub Hole Diameter - 1.5”- 4.5”Calibrated at - 90º- 180º- 270º- 360º

Width - 12” / Height - 23”

RWS-1B

Easy to use self-leveling stand

Cast aluminum base

Recessed circular level bubble

Rugged die-cast aluminum head cone

Built-in weight-storage compartments

Plated steel guide rods with zinc support springs 6061 extruded aluminum

ASTM B 221 shaft

Hardened pivot pin for maximum durability

Shop Equipment Series Features & Specifications


RSC-2TFFolding Shop Crane

Boom Length - 40”- 63”Boom Capacity - 1,100 - 4,400 lbs.

Boom Height - 80”- 93”

RES-1TFEngine Stand

Holding Capacity - 2,000 lbs.Front Width - 31” / Rear Width - 27.5”

Height - 37.5” / Length - 41”

RST-500ESEngine Support

RST-500ESDEngine Support

Holding Capacity - 1,500 lbs.Screw Travel - 13”

Adjustable Width - 40”- 63”

Holding Capacity - 1,100 lbs.Screw Travel - 18.75”

Adjustable Width - 26.5”- 49.5”

•Adjuststofitallvehicles•Rubberfootpadstoholdloadsecurely•Straddlesinnerfenderwells•Preciselypositionsengineforeasy gearboxandtransmissionremoval•Perfectfor4and6cylinderengines•1,100lb.&1,500lb.capacity

•Foldsuprighttoconservespace•Heavysteelconstruction•Longrubber-griphandle•Headswivels360ºforeasypositioning•Heavy-dutyswivelcasters•Slottedadjustablesaddlepermits•Neckisreinforcedforextrastrength

•Designedforshopswithlimitedspace•Foldsforeasystorage•Heavy-dutysteelcasters•Neckisreinforcedforextrastrength•Widebaseformaximumstability•Telescopingboomprovides4positions•Heavysteelconstruction

RES-1TF

RST-500ES / RST-500ESD: RES-1TF FEATURES: RSC-2TF FEATURES:

RST-500ESD


BendPak recognizes the manufacturing process as our moment of maximum influence. When we ship a piece of equipment, we need to know that the product that left our manufacturing complex was the best it could be. That’s why we demand nothing short of the very finest in facilities and machinery. Our primary factory houses development and manufacturing for medium and heavy-duty lifting products and wheel service models. At just over 300,000 square foot it’s a facility designed for maximum efficiency and safety, where we employ the best steel fabrication techniques in the world.

Manufacturing Superiority

MEDIUM AND HEAVY-DUTY PRODUCTS

BendPak’s second mega-sized manufacturing is used primarily for manufacturing light and medium duty lift products, select parking systems, and select vehicle repair tools and equipment. The multiplex factory houses state-of-the-art equipment including numerically-controlled turning and milling equipment, automated welding systems and full-capability services like comprehensive metallurgy testing, heat treatment, automated powder coating, and other specialty operations. The facility also houses assembly and packaging operation centers and product development testing labs for BendPak’s growing customer base around the globe.

BendPak / Ranger


LIGHT AND MEDIUM-DUTY LIFT PRODUCTS

Our multi-department manufacturing complexes have allowed us to expand machinery and employees and triple our daily production capacity. All BendPak employees are Q.C. trained and follow rigid ISO-9001 guidelines. Every day, more than 700 employees around the world dedicate themselves to putting our core values into action. Safety is first—it’s our company’s top priority, followed closely by environmental responsibility, cost-efficiency, quality, customer service and accountability for all departments. These principles guide our highly skilled workforce towards BendPak’s unified vision.

Across the globe, BendPak’s facilities encompass over 600,000 square feet in total and consist of vertically integrated manufacturing, operations and logistics facilities. Each location follows strict guidelines as outlined by ISO-9000, further supporting our position as a premier global manufacturer. At BendPak, we ensure that our offshore manufacturing is no different in approach, standards, quality, inspection or packaging from our domestic production. These facilities are audited year round and undergo systematic evaluation of documented quality programs such as TUV, ANSI/ALI ALCTV, CSA, UL and AS/NZS 1418.9. The programs themselves are audited quarterly, regardless of the facility location, to ensure continued compliance with all applicable standards.

BendPak, Ranger Products and BendPak / Ranger related marks are trademarks and/or registered trademarks of BendPak Inc.


Inquire about these certification listings.

1645 Lemonwood Drive • Santa Paula, CA USA 93060 Tel: 1-805-933-9970 • Fax: 1-805-933-9160 • www.bendpak.com

© 2014 BendPak, Inc. • BendPak, Inc. / Ranger Products are registered trademarks.

BPK RNR Catalog 2014 Final Web

Documents

Transcript of BPK RNR Catalog 2014 Final Web