bosch rexroth

Electric Drivesand Controls Hydraulics

Linear Motion andAssembly Technologies Pneumatics Service

The Drive & Control AcademyTraining Calendar 2010

The Drive & Control Company

We value our customers' "Feedback"

Feed back

Easy understanding of circuit & functioning of each components.

-Mr. O.M.KannaScientist B, V.R.D.E., Ahmednagar

This will help in rectifying many of the hydraulic related problems also.

-Mr. P.V.PillaiSenior General Manager, Mahindra Ugine Steel Co. Ltd., Raigad

It is nice programme and very useful for selection of proper valves for different application.

-Mr. Krishna Kumar ThakurManager, Tata Steel Ltd., Jamshedpur

Part of this training programme is essentially required in my project job during installation / commissioning of any hydraulic units.

-Mr.Asish Kr. BiswasManager, Steel Authority of India Ltd., Burnpur

It will be very helpful to understand the hydraulic system of our reheating furnace (Beam type) and it will be helpful in maintenance.

-Mr. Dipankar DasManager, Durgapur Steel Plant, Durgapur

This will beneficial for teaching students with 100 % confidence and I think this will helpful in Research and Development application.

-Mr. Manas Ranjan MishraSenior Lecturer, C.V.Raman College of Engineering, Bhubaneswar



Dear Customers,

Greetings for the New Year!!

Year 2009 showed effect of economic slow down . This was an opportunity for many corporations to think for the future course in terms of better processes, Knowledge enrichment, training, Quality systems. Every one realized that Knowledge is power.

During the year Bosch Rexroth actively involved in supporting the customers in Knowledge enrichment with active interaction in respect to training and tie ups for enhancing technical competencies in their organization.

We entered into many short term tie ups with customers and also signed MOU with a few for providing training to their engineers and technicians on the subject of Hydraulics and Drive & Control topics. We involved ourselves in training and spreading the base for an active industry institute partnership to lay a foundation to bridge the technological gaps..

Our knowledge sharing activities have been well received by industries for 'Drive and Control' technologies. Our initiatives in university education up gradation programme will help all our customers to source well trained technical man power.

Our customers now understand “service quality”, “life cycle enhancement”, “lower running cost” and “improvement in productivity” and hence proper knowledge to users is necessary to solve problems and achieve the objectives. We are committed to enhance your knowledge in all 'Drive & Control' technologies.

Please do not hesitate to contact us for any special training needs on our Drive and Control technologies as Bosch Rexroth are world leaders and only company to provide equipment and support on all Drives. Training for us is part of our service organization SVH and hence we can offer our customers fields service, repairs and spare part support from single window.

We assure you of our best services at all the times.

Yours sincerely

Mr. Martin VoglsangerManaging Director.

3

Contents

Training Calendar 2010

Sr. No. Title Code Page No.

1 Forward - 32 Contents - 43 Monthwise training programme - 5, 64 Industrial hydraulics IH 75 Continuous control hydraulics CCH 86 Hydraulic contamination control and maintenance HCCM 97 Mobile hydraulics MH 108 Hydraulics and pneumatics for students HP 119 Customized training in industrial CIH 12

hydraulics at customer’s premises10 Customized training program in advanced industrial CIHA 13

hydraulics at customer’s premises11 Advanced hydraulics courses for 14

specific industry segment at our training centre12 Steel mill hydraulics SP01 1513 Machine tools hydraulics SP02 1614 Hydraulic cylinders SP03 1715 Hydraulics for Power generation SP04 1816 Hydraulics for civil engineering SP05 19

applications17 Press hydraulics SP06 2018 Foundry hydraulics SP07 2119 Axial piston pumps servicing SP08 2220 Plastic machinery hydraulics SP09 2321 Drill rig hydraulics SP10 2422 Crane hydraulics SP11 2523 Excavator and loader hydraulics SP12 2624 Road construction machinery hydraulics SP13 2725 Mechatronics SP14 2826 Basic concepts of single axis Indra Drive & HMI IND001 2927 Basic concepts of multi axis Indra Drive MLD-M & HMI IND002 3028 Basic concepts of IndraControl PLC & HMI PLC001 31

29 Bosch Rexroth Partner training centers 3230 Training session photographs 3331 Registration 3432 Registration / confirmation form 3533 List of companies that participated in our training programme 36-4034 City map

Ahmedabad 41Bangalore 42

35 Bosch Rexroth offices address 43

4


Month Date Course Course Code Location

January 4th to 8th Industrial hydraulics IH Ahmedabad18th to 20th Continuous control Hydraulics CCH Ahmedabad

February 8th to 9th Axial piston pumps servicing SP08 Ahmedabad15th to 19th Industrial hydraulics IH Ahmedabad17th to 19th Basic concepts of single axis Indra Drive & HMI IND001 Bangalore

March 2nd to 3rd Machine tools hydraulics SP02 Ahmedabad8th to 12th Industrial hydraulics IH Ahmedabad15th to 16th Hydraulic contamination control and maintenance HCCM Ahmedabad22nd to 26th Industrial hydraulics IH Ahmedabad29th to 31st Continuous control hydraulics CCH Ahmedabad

April 5th to 6th Steel mill hydraulics SP01 Ahmedabad12th Hydraulic cylinder SP03 Ahmedabad19th to 23rd Industrial hydraulics IH Ahmedabad21st to 23rd Basic concepts of IndraControl PLC & HMI PLC001 Bangalore26th to 28th Continuous control hydraulics CCH Ahmedabad

May 3rd to 5th Mobile hydraulics MH Ahmedabad7th Road construction machine hydraulics SP13 Ahmedabad10th to 14th Industrial hydraulics IH Ahmedabad24th to 25th Axial piston pumps servicing SP08 Ahmedabad

June 3rd to 4th Plastic machinery hydraulics SP09 Ahmedabad7th to 11th Industrial hydraulics IH Ahmedabad14th Hydraulics for civil engineering applications SP05 Ahmedabad15th Hydraulics for power generation SP04 Ahmedabad16th Excavator and loader hydraulics SP12 Ahmedabad21st to 25th Industrial hydraulics IH Ahmedabad23rd to 25th Basic concepts of single axis Indra Drive & HMI IND001 Bangalore

July 5th to 7th Hydraulics and pneumatics for students HP Ahmedabad12th Crane Hydraulics SP11 Ahmedabad14th to 16th Mechatronics SP14 Ahmedabad19th to 23rd Industrial hydraulics IH Ahmedabad26th to 28th Continuous control Hydraulics CCH Ahmedabad

5

Training Calendar for 2010Contents


Month Date Course Course Code Location

August 2nd to 3rd Steel mill hydraulics SP01 Ahmedabad4th Press hydraulics SP06 Ahmedabad5th Hydraulics cylinder SP03 Ahmedabad9th to 10th Axial piston pumps servicing SP08 Ahmedabad16th to 20th Industrial hydraulics IH Ahmedabad18th to 20th Basic concepts of IndraControl PLC & HMI PLC001 Bangalore26th Drill rig hydraulics SP10 Ahmedabad27th Foundry hydraulics SP07 Ahmedabad

September 6th to 10th Industrial hydraulics IH Ahmedabad20th to 24th Industrial hydraulics IH Ahmedabad22nd to 24th Basic concepts of multi axis Indra Drive MLD-M & HMI IND002 Bangalore27th to 28th Hydraulic contamination control and maintenance HCCM Ahmedabad

October 4th to 6th Mobile hydraulics MH Ahmedabad11th to 15th Industrial hydraulics IH Ahmedabad20th to 22nd Basic concepts of IndraControl PLC & HMI PLC001 Bangalore25th Power generation hydraulics SP04 Ahmedabad26th Hydraulics for civil engineering applications SP05 Ahmedabad

November 1st to 2nd Plastic machinery hydraulics SP09 Ahmedabad15th to 19th Industrial hydraulics IH Ahmedabad22nd to 24th Continuous control Hydraulics CCH Ahmedabad29th to 30th Axial piston pumps servicing SP08 Ahmedabad

December 1st to 3rd Mechatronics SP14 Ahmedabad6th to 10th Industrial hydraulics IH Ahmedabad13th to 14th Machine tools hydraulics SP02 Ahmedabad22nd to 24th Basic concepts of single axis Indra Drive & HMI IND001 Bangalore20th to 24th Industrial hydraulics IH Ahmedabad27th to 29th Hydraulics and pneumatics for students HP Ahmedabad

Service Tax:Service tax & CESS on service tax for all the courses will be extra on basic fees, as applicable at the time of training/invoicing. Refer annexure for total cost Please send demand draft in favour of Bosch Rexroth (India) Ltd. payable at Ahmedabad accordingly.

6

Training Calendar for 2010Contents

Content< What is ‘Hydraulics’?< Physical fundamentals and principles< Hydraulic components (pumps, motors, cylinders, valves:

directional, pressure, flow; accessories)< Fluid power symbols as per DIN ISO 1219< Basic hydraulic circuits< Instructions, guidance, and review for practical hydraulic

aspects< Techniques of assembly, disassembly and conversion;

possibilities for handling and setting of typical components< Practice by self-trial of circuit making on demonstration

power pack< Instructions on storage, commissioning, trouble shooting,

maintenance and safety< Overview of proportional hydraulic technology

PrerequisitesTechnical knowledge

Participant ProfileOperation, maintenance, assembly and planning personnel, designers and all those interested in Hydraulic Technology

Teaching and Learning Media< Multimedia presentation< Cut sections/Transparent models< Sample units and power units< PC animations< Circuits simulation on trainer kit

DistributionTraining manualParticipation certificate

Duration5 days

Timings1st day 10.00-17.00 hrs2nd day to 4th day 09.30-17.00 hrs5th day 09.30-14.30 hrs

EvaluationTest will be conducted post course session.


Learning Goals< The participants should be able to

understand the physical parameters and symbols, the construction and function of hydraulic components.

< The participants should be able to read, analyse and understand hydraulic circuits.

< The participants should be able to make hydraulic assemblies on the Training Rig.

FeesRs.12,500/- per participant + Service Tax and CESS as applicable

Training CentreAhmedabad

Schedule04.01.2010 to 08.01.201015.02.2010 to 19.02.201008.03.2010 to 12.03.201022.03.2010 to 26.03.201019.04.2010 to 23.04.201010.05.2010 to 14.05.201007.06.2010 to 11.06.201021.06.2010 to 25.06.201019.07.2010 to 23.07.201016.08.2010 to 20.08.201006.09.2010 to 10.09.201020.09.2010 to 24.09.201011.10.2010 to 15.10.201015.11.2010 to 19.11.201006.12.2010 to 10.12.201020.12.2010 to 24.12.2010

Information and RegistrationGirish S. JoshiManager-Didactics & TrainingPhone: (0)79 6613 2388 / 6613 2187Email: [email protected]

S.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]

Further Recommended TrainingCCH (see page 8)

7

Industrial HydraulicsIH

mailto:[email protected]


Content< Brief review of conventional valves< Theoretical aspects of proportional hydraulics< Component design of:

- proportional directional, pressure and flow control valves- directional servo and pressure servo valves and electro- hydraulic controls for pumps

< Symbols as per DIN ISO 1219< Electronic controls, PLC applications< Typical continuous control hydraulic circuits< Instruction on commissioning, filtration, maintenance and

servicing(with videos on proportional valves and servo valves) and trouble shooting

< Lab session

PrerequisitesPrior attendance of our Industrial Hydraulics Program or equivalent knowledge otherwise is necessary

Participant ProfileOperating, maintenance, assembly and planning personnel, designers and all those who desire a deeper understanding of electro-hydraulics


DistributionTraining manualParticipation certificate


Learning Goals< The participants should be able to

understand the theory, construction and functioning of electro-hydraulicproportioanl and servo valves.

< The participants should be able to read, analyse and understand typical circuits with proportional and servo valves.

Duration3 days

Timings1st day 10.00-17.00 hrs2nd & 3rd day 09.30-17.00 hrs



Schedule18.01.2010 to 20.01.201029.03.2010 to 31.03.201026.04.2010 to 28.04.201026.07.2010 to 28.07.201022.11.2010 to 24.11.2010



Further Recommended TrainingAdvanced Hydraulics courses (see page 14)

8

Continuous control HydraulicsCCH




Content< Origins and types of hydraulic

contamination< Hydraulic filtration, beta-value and

cleanliness classes - NAS and ISO< Suction, pressure and return-line filters,

special types of filters such as duplex, spin on etc.

< Special filtration requirements for proportional and servo valves, centrifuges, electrostatic precipitation filters

< Filtration checking devices: Testing kit, continuous monitoring equipment

< Hydraulic fluids: their types, properties, viscosities & temperatures; mixing of fluids, oil-condition monitoring

< Sealing elements< Commissioning, practical hints for

maintenance, and trouble shooting


Participant ProfileOperating, maintenance, assembly and planning personnel, designers


DistributionParticipation certificate

Learning Goals< The participants should appreciate and

realize the criticality of hydraulic contamination.< The participants should be able to apply

control technology for the maintenance of a healthy hydraulic system.

Duration2 days

Timings1st day 10.00-17.00 hrs2nd day 09.30-17.00 hrs

FeesRs.7000/- per participant + Service Tax and CESS as applicable


Schedule15.03.2010 to 16.03.201027.09.2010 to 28.09.2010



Further Recommended TrainingIH/CCH (see page 8)

9

Hydraulic contamination control and maintenanceHCCM




Content< What is mobile hydraulics?< Hydraulic pumps and motors for mobile

applicationsPumps for open and closed circuits,controls

< Control methods:Throttle control and load sensing control

< Sandwich type mobile control valves, mobile control blocks, safety valves, mobile filters

< Proportional and servo valves for mobile application

< Various types of mobile machines and their typical circuits

< Hydraulic fluids and filtration, maintenance tips and trouble shooting

PrerequisitesBasic hydraulic knowledge

Participant ProfileEngineers and technicians concerned with design, planning, assembly, operation, maintenance, service of mobile machines




Learning GoalsThe participants should be able to: < understand control types in mobile machines - throttle

and load sensing control< construction and functioning of hydraulic units used

in mobile systems such as pumps, valves, etc.< different types of mobile machines and typical circuits.< fault finding

Duration3 days




Schedule03.05.2010 to 05.05.201004.10.2010 to 06.10.2010



Further Recommended TrainingCCH (see page 8)HCCM (see page 9)

10

Mobile hydraulics MH




ContentHydraulicsFundamentals of hydraulicsHydraulic pumps and motorsControl valvesCylindersCircuit buildingMaintenance

PneumaticsFundamentalsCompressor and compressed airElectro pneumatic conceptCircuit buildingMaintenance

PrerequisitesEngineering student of diploma or degree level

Participant ProfileStudents of undergraduate / post graduate

Teaching and Learning Media< Multimedia presentation< Cut sections< Sample units and power units< PC animations< Circuits Simulation on trainer kit

DistributionCourse materialParticipation certificate

EvaluationTest will be conducted to evaluate learning performance

Learning Goals< Students should be able to understand basics of

Hydraulics and Pneumatics.< Design simple circuits.< Hands on experience on trainer kits.

Duration3 days




Schedule05.07.2010 to 07.07.201027.12.2010 to 29.12.2010



11

Hydraulics and pneumatics for students HP




Covered Typical Topics< Introduction to oil hydraulics< Pascal‘s law, Bernoulli‘s theorem,

Reynolds‘s number, etc.< Hydraulic symbols< Various types of hydraulic circuits< Function, operation and design of

pumps, motors, valves, cylinders andaccessories

< Solving problems with hydraulic systems< Trouble shooting: fault finding and

remedial measures

Prerequisite Education/Experience< Equivalent to graduate engineer/diploma

holders with a few years of experience/senior technicians with several years of experience


Duration2 days

Number of ParticipantsPreferably limited to 20

FeesRs.60000/- per program including one copy of course material + Service Tax and CESS as applicable

Faculty ExpensesTo & fro economy class air fare or 2nd AC (2-T) train fare where air service not available.

Appropriate lodging, boarding and local transportation to be arranged by the customer.

All charges shall be payable at least two weeks in advance.



12

Customized training program in industrial hydraulics at customer’s premises CIH




Covered Typical Topics< Fundamentals of oil hydraulics in brief< Review of hydraulic symbols; hydraulic

circuitry, including complex circuits< Construction, working and design of

hydraulic units, including variable axial units and their controls

< Proportional and servo valves; logic elements

< Commissioning hydraulic systems; hydraulic fittings, hydraulic oils

< Solving problems with complex hydraulic systems

Prerequisite Education/Experience< Equivalent to graduate engineer/

diploma holders with a few years of experience/senior technicians with several years of experience


Duration3 days


FeesRs.80000/- per program including one copy of course material + Service Tax and CESS as applicable

Faculty ExpensesTo & Fro economy class air fare or 2nd AC (2-T) train fare where air service not available.

Appropriate lodging, boarding and local transportation to be arranged by the customer.

All charges shall be payable at least two weeks in advance.



13


Customized training program in advanced industrialhydraulics at customer’s premises CIHA



Course Content< Hydraulic circuits for equipment specific

to the industry, design criteria,functioning

< Product training specific to the industry< Hands on experience on products like

assembly/disassembly, testing, failureanalysis

< Trouble shooting and maintenance tips

Prerequisite Education/Experience< Equivalent to graduate engineer/

diploma holders with a few years of experience/senior technicians with several years of experience

< Every industry segment wants to know more on hydraulics specific to their field and new development trends, our experts in the field shall impart training and share experience with the group.

< The OEM/end users will find this training ideal for optimum use of equipment.


14

Objective

The training courses, duration and fees are as follows:

c SP01 Steel mill hydraulics c SP10 Drill rig hydraulicsc SP02 Machine tool hydraulics c SP11 Crane hydraulicsc SP03 Hydraulic cylinders c SP12 Excavator and loader hydraulicsc SP04 Power generation hydraulics c SP13 Road construction machinery hydraulicsc SP05 Hydraulics for civil engineering application c SP14 Mechatronicsc SP06 Press hydraulics c IND Basic Concept of Servo & HMIc SP07 Foundry hydraulics c PLC Basic Concept of PLC & HMIc SP08 Servicing axial piston pumpsc SP09 Plastic machinery hydraulics

Please NoteIf necessary the training course can be conducted at a convenient place other than our training centre, provided the number of participants meets the norm.

Advanced courses for specific industry segment at our training centre


Content< Hydraulics for various applications like

melting furnaces, rolling mills, AGC, continuous casting, etc.

< Components selection for steel hydraulics:- Pumps- Valves, Proportional & Servo- Accessories

< Servo valves applications for steel mills< Typical circuits and operations< Fluids and contamination control in

steel mills < Trouble shooting and maintenance tips

for steel mills





Learning Goals< To obtain industry specific knowledge of

hydraulic applications and usage.

Duration2 days




Schedule05.04.2010 to 06.04.201002.08.2010 to 03.08.2010




15

Steel mill hydraulicsSP01




Content< Hydraulics for machine tools, various

applications like GPM, SPM, CNC.< Design parameters and products

selection for machine tools:- Pumps- Valves- Electro hydraulic proportional and servo valves- Controls- Filters

< Standard power units- Clamping- Filters








Duration2 days




Schedule02.03.2010 to 03.03.201013.12.2010 to 14.12.2010




16



Machine tools hydraulicsSP02




17

Content< Types of cylinders

- Tie rod construction- Welded type- Mill duty

< Design criteria of cylinders< Seals selection< Mounting styles < Applications: industrial, mobile, steel plants, servo

cylinders < Trouble shooting and maintenance tips







Duration1 day

Timings10.00 to 17.00 hrs



Schedule12.04.201005.08.2010




Hydraulic cylindersSP03




Content< Hydraulic applications for power

generation like turbine governor control, oil supply units, etc.

< Typical circuits and design parameters< Component selection for power generation hydraulics

- Pumps- Valves- Servo and proportional valves- Logic elements- Accessories - filters, accumulators, etc.








Duration1 day


FeesRs.4000/- per participant + service tax and CESS asapplicable


Schedule15.06.201025.10.2010




18

Hydraulics for Power generationSP04




Content< Hydraulic applications for civil engineering like

- Hydraulic operated dam gates- Radial gates- Vertical gates

< Typical circuits and design parameters< Component selection for civil engineering application:

- Pumps- Valves- Logic valves- Proportional valves and controls- Cylinders

< Trouble shooting and maintenance tips< Electrical interfacing







Duration1 day




Schedule14.06.201026.10.2010




19

Hydraulics for civil engineering applications SP05




Content< Types of press applications and typical circuits< Design parameters for press hydraulics< Component selection for press hydraulics:

- Pumps- Valves- Logic elements- Proportional valves- Cylinders- Press manifolds








Duration1 day


FeesRs.4000/- per participant + service tax and CESS asapplicable


Schedule04.08.2010




20

Press hydraulicsSP06




Content< Applications of hydraulics in foundry equipment< Typical circuits and design criteria< Component selection for foundry applications:

- Pumps- Valves- Proportional valves and controls- Cylinders- Filters






Learning Goals< To obtain industry specific knowledge

of hydraulic applications and usage.

Duration1 day


FeesRs.4000/- per participant + service tax and CESS as applicable

Training CentreBangalore

Schedule27.08.2010




21

Foundry hydraulicsSP07




Content< Principles of hydraulic pumps and applications< Axial piston pumps:

- Bent axis design- Swash plate design- Various controls DR/DFR/DFLR/DFE, etc.

< Installation tips< Failure analysis and trouble shooting< Assembly, disassembly< Testing and hands on experience in Service Centre





Learning Goals< To obtain knowledge of servicing axial piston pumps< Failue analysis

Duration2 days




Schedule08.02.2010 to 09.02.201024.05.2010 to 25.05.201009.08.2010 to 10.08.201029.11.2010 to 30.11.2010




22

Axial piston pumps servicingSP08




Content< Applications of hydraulics in plastic machineries like:

- Injection moulding- Blow moulding- Extrusion machine

< Typical circuits and design parameters< Component selection for plastic machineries:

- Pumps- Valves- P/Q controls- Proportional valves- Logic elements

< Axial piston pumps and type of control for power saving modern controls

< Trouble shooting and maintenance tips< Hands-on experience in Service Centre







Duration2 days




Schedule03.06.2010 to 04.06.201001.11.2010 to 02.11.2010




23

Plastic machinery hydraulicsSP09




Content< Applications of hydraulics in drilling rigs< Component selection:

- Pumps- Mobile valves- Accessories

< Typical circuits and operation< Trouble shooting







Duration1 day




Schedule26.08.2010



Further Recommended TrainingHCCM (see page 9)

24

Drill rig hydraulicsSP10




Content< Applications and types of crane< Circuits of operation

- Open loop- Closed loop- Throttle control- Load sensing/LUDV

< Components selection- Pumps- Control valves- Accessories








Duration1 day


FeesRs.4000/- per participant + service tax and CESS as `applicable


Schedule12.07.2010



Further Recommended TrainingCCH (see page 8)

25

Crane hydraulicsSP11




Content< Application of hydraulics in excavators and loaders< Types of circuits and operations

- Pumps- Control valves- Accessories

< Maintenance tips and trouble shooting







Duration1 day




Schedule16.06.2010



Further Recommended TrainingCCH (see page 8HCCM (see page 9)

26

Excavator and loader hydraulicsSP12




Content< Application of hydraulics in road construction machinery

- Road compactors- Pavers- Concrete mixers

< Concrete pumps< Types of circuits and operation:

- Open loop- Closed loop- Throttle control

< Load sensing/LUDV< Components selection and functioning

- Pumps- Mobile valves- Accessories

< Maintenance tips and trouble shooting







Duration1 day




Schedule07.05.2010



Further Recommended TrainingHCCM (see page 9)

27

Road construction machinery hydraulics SP13




Content< Overview of hydraulics, pneumatics, electronics< Concept of assembly and conveying systems< Configuring of mechanical equipment and

electronic controls for assembly and conveying systems

< PLC technology and programming

PrerequisitesTechnical knowledge and aptitude for control Technology


Teaching and Learning Media< Multimedia presentation< Sample units


Learning Goals< To impart knowledge of mechatronics i.e. combination of

mechanical and electronic systems.

Duration3 days




Schedule14.07.2010 to 16.07.201001.12.2010 to 03.12.2010



Further Recommended TrainingIH (see page 7)

MechatronicsSP14


28



ContentProgramming & parameterization of IndraDrive in

< Analog mode< Drive controlled Positioning mode< PLC controlled positioning mode (MLD-S)

Operating & programming of HMI< VCP communication with IndraDrive< Screen development

PrerequisitesTechnical knowledge in Electronics




Learning Goals< To impart basic knowledge of

electric drives and controls.

Duration3 days

Timings09.30-16.30 hrs



Schedule17.02.2010 to 19.02.201023.06.2010 to 25.06.201022.12.2010 to 24.12.2010

Information and RegistrationSubbarao D.V.Electric Drives & ControlBosch Rexroth (India) LimitedPlot 96, Phase III, Peenya Industrial Area,Bangalore - 560 058, IndiaPhone: +91 (0)80 41170211Ext. 311Fax: +91 (0)80 28397374Mobile: +91 (0)99 011 00446Email: [email protected]

Further Recommended TrainingIND2 (see page 30)

Basic Concepts of Single Axis Indra Drive & HMIIND001


29


ContentProgramming & parameterization of IndraDrive using

< PLC controlled positioning mode (MLD-M)< Virtual & Real master< Velocity & Phase synchronization

Operating & programming of HMI< VCP communication with IndraDrive< Screen development





Learning Goals< To impart basic knowledge of

electric drives and controls.

Duration3 days




Schedule22.09.2010 to 24.09.2010


Basic Concepts of Multi Axis Indra Drive MLD-M & HMIIND002


30


Content< Interface of I/O modules with PLC< Programming of PLC< VCP communication with PLC< VCP Screen development





Learning Goals< To impart basic knowledge of PLC & HMI

controls.

Duration3 days




Schedule21.04.2010 to 23.04.201018.08.2010 to 20.08.201020.10.2010 to 22.10.2010


Further Recommended TrainingIND1 (see page )

Basic Concepts of IndraControl PLC & HMIPLC001


31


32

VTU GSSS VTU Bosch Rexroth Centre of CompetenceGSSSIETW, K.R.S. Road,Mysore-570 016.Karnataka

Bosch Rexroth Partner training centers


Central Manufacturing Technology Institute(Govt. of India Society)

Tumkur Road,Bangalore 560 022.

C.V.Raman College of EngineeringBidya Nagar,Mahura, Janla,Bhubaneswar 752 054.Orissa

Sri Jayachamarajendra College of EngineeringManasagangothri,Mysore-570 006.

Karnataka

1. TTT programme for CMTI faculty 2. Training session at Qatar Steel, Qatar

3. TTT programme for C.V.Raman faculty for Pneumatics 4. CCH Lab session at Ahmedabad

5. Hydraulic & Pneumatics training for students 6. Training session at Hindustan Zinc Ltd., Rajasthan

7. Demonstration of pump assembly-Ahmedabad service centre 8. Training session at Welspun, Anjar

Please Note< The enclosed registration format (or photocopy thereof), along with full payment (fees + service tax and

CESS as applicable) in advance by Demand Draft in favor of ‘Bosch Rexroth (India) Ltd.’, Payable at Ahmedabad, must be forwarded at least two weeks in advance and confirmation of registration obtained ten days before the start of the course. The acknowledged confirmation-slip will have to be produced by the participant at the time of joining the program.

< We reserve the right to prepone/postpone/cancel any of the programs, and also to transfer the registration of candidates to another program, for which intimation will be given one week in advance to the candidates to whom written confirmation has been given.

< Our company's PAN "AAACM9898F" dt. 18/02/1974S.T. Regn. No. "AAACM9898FST001" dt. 14/07/2003

< During correspondence for training kindly send us your “address for invoicing” as well as “address for correspondence” separately with all contact telephone and fax numbers.

< Kindly provide following details without fail, once training programme/participation by any of your candidates is finalized.Your company’s TIN No./ DateYour company’s C.S.T.No./ Date Your company’s TAN No./ DateYour company’s PAN No./ Date

Registration

Information & RegistrationS.G. KelshikarGeneral Manager-SVHBosch Rexroth (India) LimitedNear Vatva Railway Station, Vatva Ahmedabad - 382 445Phone: (0)79 6613 2162Fax: (0)79 6613 2423Email: [email protected]


34


Registration/Confirmation (Use seperate form for each participant. Photocopies can be used)

Sponsoring company’s nameand address

Participant name: Department:Payment details: DD NO. Dated for Rs.Name, designation & signature of authorized person:Name: Designation:Signature:Mail or fax to: Mr. S.G. Kelshikar, General Manager-SVH

Bosch Rexroth (India) Ltd.Near Vatva Railway Station, Vatva, Ahmedabad - 382 445.Fax No.: 079 6613 2423

PS: Demand draft payable to Bosch Rexroth (India) Ltd. at AhmedabadDate:

Confirmation of Registration:M/s.

For the kind attention of Mr.

We confirm registration ofin the Hydraulic Training Program from to

Please report between 09.30AM to 09.45AM at Training Centre, Bosch Rexroth (India) Ltd., Ahmedabad / Bangalore.

Bosch Rexroth (India) Ltd.

S.G. KelshikarGeneral Manager-SVH



Course Selection:

£ IH : Industrial Hydraulics £ IND1 : Basic concepts of Single axis

IndraDrive & HMI

£ CCH : Continuous Control Hydraulics £ IND2 : Basic concepts of Multi axis

IndraDrive MLD-M & HMI

£ HCCM : Hydraulic Contamination Control & Maintenance £ PLC : Basic concepts of PLC & HMI

£ MH : Mobile Hydraulics

£ HP : Hydraulics and Pneumatics for students

£ SP (Please mention the no. of the course)Course duration: From to Venue: £ Ahmedabad / £ Bangalore

35

List of companies that participated in our training program

Name of company Location

Automobiles

Ashok Leyland Ltd. HosurBajaj Auto Ltd. AurangabadBajaj Auto Ltd. PuneHero Honda Motors Ltd. FaridabadKirloskar Toyoda Textile Machinery Ltd. BangaloreKirloskar Oil Engines Ltd. KolhapurMaruti Udyog Ltd. DelhiTATA Motors Ltd. PuneTATA Automotive Composite(International)Ltd. PuneTVS Motor Company Ltd. Hosur

Ceramics and Cement

ACC Ltd. (Wadi Cement Works) WadiBell Ceramics Ltd. DoraEureka Tiles Ltd. DalpurGrasim Cement Ltd. RaipurGujarat Ambuja Cement Ltd. Kodinar Jaypee Cement Ltd. RewaMadras Cement Ltd. AlathiyurOrient Cement JalgaonRegency Ceramics Ltd. KakinadaSanghi Industries Ltd. (Unit Sanghi Cement) MotiberSPL Ltd. (Unit Somany Tiles) KadiUltra Tech Cemco Ltd. ChandrapurUltra Tech Cemco Ltd. (A.P. Cement Works) TadpatriUltra Tech Cemco Ltd. (GCW) Rajula

Educational Institutes

Army Institute of Technology PuneCentral Manufacturing Technology Institute BangaloreGovernment Polytechnic AhmedabadIndustrial Training Institute, Tarsali VadodaraIndustrial Training Institute, Kubernagar AhmedabadL.D. College of Engineering AhmedabadNational Institute of Engineering MysoreNirma University AhmedabadShri U.V. Patel College of Engineering MehsanaVisvesvarya Technological University BelgumIndian School of Mines DhanabadMEI Polytechnic Bangalore

36




General Engineering

Acme Containers NairobiAeronautical Development Establishment BangaloreBirla Cellulosic BharuchCIPET AhmedabadDGP Windsor India Ltd. ChhatralFerromatik Milacron India Ltd. AhmedabadHindustan Aeronautics Ltd. BangloreHMT Ltd. (Press Unit) HyderabadIndian Machine Tools Manufacturers Association MumbaiKirlosker Brothers Ltd. DewasKlockner Desma Machinery (P) Ltd. AhmedabadL&T Demag Ltd. ChennaiLakshmi Machine Works Ltd. CoimbatoreLarsen & Toubro Ltd. (HED) PowaiLuk India Pvt.Ltd. HosurMerit Technologies India Ltd. ChennaiMICO Ltd. NashikMicromatic Grinding Technologies Ltd. GhaziabadNilkamal Plastics Ltd. NoidaNilkamal Plastics Ltd. SilvasaNMHG India Engineering and Support Services Pvt. Ltd. PuneNHPC Ltd. FaridabadNash Robotics and Automation Pvt. Ltd. NasikOil India Ltd. AssamOrdnance Factory AmbajhariOrdnance Factory BhandaraOrdnance Factory KanpurOrdnance Factory KatniOrdnance Factory MedakPolymechplast Machines Ltd. VadodaraPrashant Gamatex Pvt.Ltd. AhmedabadPrince Multiplast Pvt.Ltd. DamanSKF India Ltd. PuneThe Singareni Collieries Co. Ltd. RamagundamThermax Ltd. PuneTrans Impex Pvt. Ltd. MumbaiVIDEOCON Narmada Glass Ltd. BharuchWIDIA India Ltd. BangaloreWindsor Machines Ltd. Ahmedabad

37




Mobile Equipment

Apollo Construction Equipments Pvt. Ltd. MehsanaAquarius Engineers Pvt. Ltd. PuneAllcargo Global Logistics Pvt. Ltd. RaigadBharat Earth Movers Ltd. MysoreCaterpillar India Pvt. Ltd. ThiruvallurEimco Elecon (India) Ltd. VidyanagarEscorts Construction Ltd. FaridabadGodrej & Boyce Mfg. Co. Ltd. MumbaiGreaves Ltd. ChennaiIndian Railways JamalpurIndian Railways MumbaiIngersoll Rand India Ltd. BangaloreJCB India Ltd. FaridabadL&T Case Equipments Ltd. PithampurLarsen & Toubro Ltd. KansbahalLarsen & Toubro Ltd. (ECC Division) ChennaiPlasser India Pvt. Ltd. FaridabadPutz Pumps (India) Pvt. Ltd. GoaSchwing Stetter (India) Pvt. Ltd. ChennaiTIL Ltd. Kolkata

Ports

Adani Port Ltd. MundraChennai Port Trust ChennaiGarden Reach Shipbuilders & Engineers Ltd. KolkataGujarat Pipava Port Ltd. RajulaIndian Navy KarwarJawahar Nehru Port Trust Ltd. MumbaiMosaic India Pvt. Ltd. JamnagarNaval Dockyard VisakhapatnamTolani maritime Ins. PuneTTS Handling Systems Mumbai

38




Power Genaration

Bharat Heavy Electricals Ltd. Bhopal.Bharat Heavy Electricals Ltd. HardwarBharat Heavy Electricals Ltd. TrichyFouress Engineering (I) Pvt. Ltd. BangaloreGujarat Industries Power Corporation Ltd. Surat Karnataka Power Corporation Ltd. KadraKrishna Bhagya Jala Nigam Ltd. AlmattiNational Hydroelectric Power Corporation Ltd. ChambaNational Hydroelectric Power Corporation Ltd. UriNational Thermal Power Corporation Ltd. FarakkaNational Thermal Power Corporation Ltd. KorbaNational Thermal Power Corporation Ltd. RamagundamNational Thermal Power Corporation Ltd. RihandNeyveli Lignite Corporation Ltd. NeyveliNuclear Power Corporation of India Ltd. KakraparNuclear Power Corporation of India Ltd. TarapurQatar Power Company QatarReliance Energy Ltd. DahanuSatluj Jal Vidyut Nigam Ltd. NathpaTATA Power Corporation RaigadVA Tech Escher Wyss Flovel Ltd. Faridabad

Rubber

Apollo Tyres Ltd. VadodaraArt Rubber Industries Ltd. NashikBridgestone India Pvt. Ltd. PithampurJ K Industries Ltd. (Banmore Tyre Plant) BanmoreLarsen & Toubro Ltd. (LTM Business Unit) Chennai

39



40



Steel / Non Ferrous Industries

Automotive Composite Sys. Int. Ltd. PuneBharat Aluminium Co. Ltd. ChhatisgarhBharat Forge Ltd. PuneBhilai Steel Plant (A Unit of S.A.I.L.) BhilaiBokaro Steel Plant (A Unit of S.A.I.L.) BokaroDisa India Ltd. ChennaiDurgapur Steel Plant (A Unit of S.A.I.L.) DurgapurElectrosteel Castings Ltd. KolkataEssar Steel Ltd. HaziraFlat Products Equipments (I) Ltd. MumbaiHindalco Industries Ltd. BelurmathHindalco Industries Ltd. ThaneHospet Steel Ltd. KarnatakaIndian Seamless Steels & Alloys Ltd. JejuryIspat Industries DolviJindal Stainless Ltd. HisarJindal Steel & Power Ltd. RaigarhJothi Malleables Pvt. Ltd. TiruchirappalliJSW Steel Ltd. BellaryKalyani Steels Ltd. PuneKirloskar Ferrous Industries Ltd. BevinahalliM.N.Dastoor & Co. Ltd. JamshedpurMagadh Steel Industries Pvt. Ltd. DewasMECON (India) Ltd. BokaroMishra Dhatu Nigam Ltd. HyderabadNELCAST Ltd. PonneriQatar Steel QatarRatnamani Steels Ltd. ChhatralRourkela Steel Plant (A Unit of S.A.I.L.) RourkelaSalem Steel Plant (A Unit of S.A.I.L.) SalemSaw Pipes Ltd. MundraSAIL (RDCIS) RanchiSAIL(CET) BhillaiSunflag Iron & Steel Co. Ltd. BhandaraThyssen Krupp Electrical Steel India Pvt. Ltd. NashikTISCO Ltd. JamshedpurTower Aluminium Co. Ltd. NigeriaUsha Martin Training Institute JamshedpurVisakhapatnam Steel Plant (A Unit of S.A.I.L.) VisakhapatnamWelspun Gujarat Stahl Rohren Ltd. Bharuch


For reaching our Training Centre,Ahmedabad city map for your reference

Address : Bosch Rexroth (India) Ltd.Near Vatva Railway StationVatva,Ahmedabad - 382 445

Airport : Ahmedabad (18 Km)

Railway Station : Ahmedabad (10 km), Maninagar (5 km)

City Bus Station : Laldarwaja (12 km)

Local conveyance : Auto, City Bus, Taxi, Train

Charodi

Jagatpur

Cherpur

Gota

Sola

SilajGhatalodia

Memnagar

Thaltej

Bodakdav

Vastrapur

Gujarat University

Gujarat Vidyapeeth

Chandalodia

Kali

Ranip

Sabarmati

Sabarmati Hansol

Kotarpur

Naroda

Kathwada

Nikol

Shastri StadiumShastri Stadium

Ram Rajya Nagar

OdhavOdhav RoadRakhialRoad

Sardar Nagar

KuberNagar

Gujarat Stadium

CampHanuman

KrishnaNagar

New Wadaj

To Gandhinagar

To Mahesana

To Himatnagar

Satellite

Ambli

IIM

PRI Gandhigram

High CourtCPO Daripur

Kasurba Gandhi Rd.

Dudheswar

SabarmatiAsharam

NaranpuraCircuitHouse

HatheesingTample

Asarwa

Saraspur

AHMEDABAD

Gomtipur

Shaking Minarates

Satyamnagar

Amraiwadi

Singarava

Lal Darwaja

Vastral

Gandhi Marg

Old City

GujaratCollage Town Hall

MuscumS. T. Bus Stand

ZooN.I.D.

Ambawadi

Paldi Kankaria LakeBalvatika

L. G. HospitalShah Alam

VasnaVejalpur

Jodhpur

Makarba

Sarkhaj

Gyaspur

Isanpur

Maninagar

Ghodasar

KhokharaMahemdabad

C. T. C.M

Ramol

Vatva

Narol

Vindol

ShahwadiGopalpur

Pipalaj

Lambha

Asalali

To Vadodara

Barejadi

ChandolaLake

Sabrm

ti riv

aa

er

brm

t rive

Sa

a i r

a

Ahmedabad CityNot to Scale

N

41


For reaching our Training Centre,Bangalore city map for your reference

Address : Bosch Raxroth (India) Ltd.Plot 96, Phase IIIPeenya Industrial AreaBangalore - 360 058

Airport : Bangalore (25 km)

Railway Station : Bangalore (18 km)

City Bus Station : Majestic (18 km)

Local conveyance : Auto, Bus, Taxi

42


43

Bosch Rexroth (India) Limitedwww.boschrexroth.co.in

AhmedabadNear Vatva Railway Station, Vatva, Ahmedabad - 382 445Phone : +91 (0)79 6613 2388Fax : +91 (0)79 6613 2423

BangalorePlot 96, Phase lll, Peenya Industrial Area, Bangalore - 560 058Phone : +91 (0) 80 4117 0211Fax : +91 (0) 80 2839 4021

DelhiS-10, Green Park Extension, Near Uphaar Cinema,New Delhi - 110 016Phone : +91 (0) 11 2656 6525Fax : +91 (0) 11 2656 6887

Jamshedpur10, Circuit House Area (North), Road No.5, Jamshedpur - 831 001Phone : +91 (0) 657 2222957Fax : +91 (0) 657 2220398

KolkataMerlin Surabhi, 2nd Floor, 8/1/2 Loudon Street(Dr.U.N. Brahmachari Street), Kolkata - 700 017Phone : +91 (0) 33 4002 0175Fax : +91 (0) 33 4002 0199

MumbaiAdvance House, 2nd Floor, Marol Naka, Makwana Road,Andheri (East), Mumbai - 400 059Phone : +91 (0) 22 2856 3290 / 2856 3291Fax : +91 (0) 22 2856 3293 / 4

Pune18/4 & 19/4, Hadapsar Industrial EstatePune - 411 013.Phone : +91 (0) 20 2681 3841 / 42Fax : +91 (0) 20 2681 3844


Service center

Production

Sales Office

Training center

System Integrator/ sales partners-Not shown-more than 46

http://www.boschrexroth.co.in

Bosch Rexroth (India) Ltd.Near Vatva Railway Station VatvaAhmedabad - 382 445, Indiawww.boschrexroth.co.in

44

http://www.boschrexroth.co.in

bosch rexroth

Documents

Transcript of bosch rexroth