BMW F800GS S U P P L E M E N T A R Y M A N U A L...BMW F800GS 2008-2016 PAGE 3/3 Typical position...
3
BMW F800GS 2008-2016 Remove the seat. www.healtech-electronics.com S U P P L E M E N T A R Y M A N U A L for QSE-1 + QSH-F2D PAGE 1/3 Remove the left and right side covers. Remove the ignition switch cover.
Transcript of BMW F800GS S U P P L E M E N T A R Y M A N U A L...BMW F800GS 2008-2016 PAGE 3/3 Typical position...
BMW F800GS2008-2016
Remove the seat.
www.healtech-electronics.com
S U P P L E M E N T A R Y M A N U A Lfor QSE-1 + QSH-F2D
PAGE 1/3
Remove the
left and right side covers.
Remove the
ignition switch cover.
BMW F800GS2008-2016
www.healtech-electronics.com PAGE 2/3
Remove the
right side tank cover and
middle cover.
Connect QSH connectors in-line
with the injector connectors.
Remove the
center tank cover.
BMW F800GS2008-2016
www.healtech-electronics.com PAGE 3/3
Typical position for the
QuickShifter easy.
Mount the QSE sensor.
(Use the new bolt and washers supplied with
the unit. Make sure to place one washer above
the sensor and one washer below the sensor.
tighten the screw by 5 Nm.
When tightened, do not try to rotate the
sensor body.)