Contents

A Bluetooth USB Adapter 2.0B CD-ROM with Bluetooth software and manualC Bluetooth USB 2.0 Adapter Instruction Guide

CongratulationsThe Kensington Bluetooth USB Adaptor 2.0 gives you enhanced speed, security and reliability foryour favorite Bluetooth devices. Please read this Instruction Guide to learn valuable informationabout the proper installation and use of your device. Register your new Bluetooth USB Adapter 2.0online at www.kensington.com.

System RequirementsHardware Requirements• PC with a Pentium® processor or equivalent• Available USB port (USB 2.0 or 1.1)• CD-ROM driveOperating System Requirements• Windows® XP with Service Pack 1 or higher• Mac® OSX v 10.2.8 or later. Works with most Bluetooth® v1.1, v1.2, v2.0 enabled devices,

excluding Bluetooth headsets. Mac software not included, visit www.apple.com for Bluetooth software driver.

Installation InstructionsMac OS X users (10.2.8 or later): Simply plug in the Bluetooth USB adapter to start Bluetooth. For setup and configuration information, see Installing on Mac OS X (10.2.8 and Later).Windows XP users: Uninstall any existing Bluetooth software before you begin this installation.Install the Bluetooth Software included on the CD-ROM first, and then plug in the USB adapter. For more detailed information or instructions consult the manual on the CD-ROM.

IMPORTANT: The user must have administrator privileges to install the the software driver and applications. If non administrative user is logged on then the software will not be installed correctly.

Instruction Guide

Guide d’instructions

Bedienungsanleitung

Handleiding

Istruzioni

Manual de instrucciones

CBA

Kensington Computer Products GroupA Division of ACCO Brands333 Twin Dolphin Drive, Redwood Shores, CA 94065Designed in California, U.S.A. by Kensington. Made in Chinawww.kensington.com

901-1655-01

Bluetooth® USB Adapter 2.0Bluetooth Technology v2.0

Instruction Guide

Windows XP Installation1. Put the installation CD in your CD drive.

2. Click Click! to Install to begin. (If the CD does not autoplay, select Start > Run...and type: D:autorun.exe, where ‘D’ is the letter of your CD drive.)

3. Select I accept the terms in the license agreement, and click Next.

4. Click Next to continue.

5. Click Install to begin installing the software. A status window shows the progress of the installation.

6. Click OK to continue.

NOTE: If this warning appears, plug the Bluetooth USB adapter into an available USB port.

7. After the Bluetooth USB adapter is connected, click Next to install the driver software.

8. Click Finish and then click Quit on the main CD contents screen.

Set up the Bluetooth Software

1. Double-click My Bluetooth Places on the desktop to begin the setup.

2. Click Next to continue.

3. Enter a unique name for this computer. Select either Laptop Computer or Desktop Computerfrom the dropdown menu, and then click Next.

33348US_33x22.qxd 10/24/06 4:55 PM Page 1

4. Click Next to continue.

5. Click Next to install Bluetooth services (installation will take a few minutes).

6. If you have another Bluetooth device, click Next. Otherwise, click Skip.

7. When you are finished configuring the Bluetooth USB Adapter and any other Bluetoothdevices, click Finish.

Connecting a Bluetooth Mouse or KeyboardTo start a Bluetooth connection with a mouse or keyboard:

1. Double-click My Bluetooth Places on the desktop to begin the setup.2. Select Enter Bluetooth Neighborhood.3. To see an updated list of devices, right-click anywhere, except on a device name, and then

select Refresh from the pop-up menu.4. Double-click the mouse or strike any key on the keyboard that you are trying to connect.5. Each time the computer is turned on, the connection will be re-established automatically.

Setting Up Additional Bluetooth Devices

To set up additional Bluetooth devices, double-click My Bluetooth Places on the desktop, andthen click on Bluetooth Setup Wizard.

NOTE: For more technical details on the supported functions and services refer to the manualprovided in PDF format inside the CD.

Configuration of audio Bluetooth devicesOnce a Bluetooth audio device is coupled with the Bluetooth dongle it is not automaticallyselected as the default audio device by the OS.In order to configure the Bluetooth audio device follow these steps:1. Select Control Panel and Sounds and Audio Devices.2. Select the Audio tab and be sure that the Bluetooth service Bluetooth Hand free Audio is

selected as default device in both Sound playback and Sound recording.3. Control the volume of the device by clicking on the Volume button on the same window.4. Select the Voice tab and be sure that the Bluetooth service Bluetooth Hand free Audio is

selected as default device in both Voice playback and Voice recording.5. Control the volume of the device by clicking on the Volume button on the same window.6. Click OK when done in order to save these changes.

IMPORTANT: Some VoIP applications include controls for the audio and voice devices: be sure that the Bluetooth device is selected in these menus. If the application uses the defaultsettings of the OS then the settings specified in the Control Panel and Sounds and AudioDevices are adopted as default settings.

Installing on Mac OS X (10.2.8 and Later)

After you plug in the Bluetooth USB Adapter, a Bluetooth icon appears in the upper-right cornerof the Finder Menu. Use this menu to set up other Bluetooth devices, send files to pairedBluetooth devices, or open the Bluetooth System Preferences pane.

With the Bluetooth USB Adapter plugged in, go to System Preferences to adjust your Bluetooth configuration.

NOTE: For more information on using Bluetooth with Mac OS X, visit www.apple.com and click onthe Support tab. Select Bluetooth from the drop down menu, or enter it into a search field. Help isalso available on your computer (10.2.8 and later). Select Help (Mac Help) from the Finder Menu.

Technical SupportIn North America, technical support is available to all registered users of Kensington products.There is no charge for technical support except long distance charges where applicable. TechnicalSupport Contact information can be found on the back cover of this manual.

Telephone SupportThere is no charge for technical support except long-distance charges where applicable. Please visit www.kensington.com for telephone support hours.Please note the following when calling support:• Call from a phone where you have access to your device• Be prepared to provide the following information:

– Name, address, and telephone number– The name of the Kensington product

– Make and model of your computer– Your system software and version– Symptoms of the problem and what led to them

Federal Communications Commission Radio Frequency Interference StatementNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.CAUTIONS: Modifications not expressly approved by Kensington may void the user’s authority to operate the device under FCC regulations and must not be made.SHIELDED CABLES: In order to meet FCC requirements, all connections to equipment using a Kensington input deviceshould be made using only the shielded cable provided.

FCC Declaration of Conformity Compliance Statement for the Kensington Bluetooth USB Adapter 2.0This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, includinginterference that may cause undesired operation. As defined in Section 2.909 of the FCC Rules, the responsible party for this device is Kensington Computer Products Group, 333 Twin Dolphin Drive, Redwood Shores, CA 94065, USA.

This Class B digital apparatus complies with Canadian ICES-003.

CE Declaration of ConformityKensington declares that this product is in compliance with the essential requirements and other relevantprovisions of EMC Directive 89/336/EEC.For Europe, a copy of the Declaration of Conformity for this product may be obtained by clicking on the Compliance Documentation link at www.support.kensington.com.

Two-Year Limited WarrantyKENSINGTON COMPUTER PRODUCTS GROUP (“KENSINGTON”) warrants this product against defects in material andworkmanship under normal use and service for two years from the original date of purchase. KENSINGTON, at its option,shall repair or replace the defective unit covered by this warranty. Please retain the dated sales receipt as evidence of thedate of purchase. You will need it for any warranty service. In order to keep this warranty in effect, the product must havebeen handled and used as prescribed in the instructions accompanying this warranty. This warranty does not cover anydamage due to accident, misuse, abuse or negligence. This warranty is valid only if the product is used with the equip-ment specified on the product box. Please check product box for details or call KENSINGTON technical support.DISCLAIMER OF WARRANTYEXCEPT FOR THE WARRANTY PROVIDED HEREIN, TO THE EXTENT PERMITTED BY LAW, KENSINGTON DISCLAIMS ALLWARRANTIES, EXPRESS OR IMPLIED, INCLUDING ALL WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR APARTICULAR PURPOSE. TO THE EXTENT THAT ANY IMPLIED WARRANTIES MAY NONETHELESS EXIST BY OPERATION OF LAW, ANY SUCH WARRANTIES ARE LIMITED TO THE ONE-YEAR DURATION OF THIS WARRANTY.SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVELIMITATIONS MAY NOT APPLY TO YOU.LIMITATION OF LIABILITYREPAIR OR REPLACEMENT OF THIS PRODUCT, AS PROVIDED HEREIN, IS YOUR EXCLUSIVE REMEDY. KENSINGTON SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST REVENUES, LOST PROFITS, LOSS OF USE OF SOFTWARE, LOSS OR RECOVERY OF DATA, RENTAL OF REPLACEMENTEQUIPMENT, DOWNTIME, AND DAMAGE TO PROPERTY, AND THIRD-PARTY CLAIMS, ARISING OUT OF ANY THEORY OFRECOVERY, INCLUDING WARRANTY, CONTRACT, STATUTORY OR TORT. NOTWITHSTANDING THE TERM OF ANY LIMITEDWARRANTY OR ANY WARRANTY IMPLIED BY LAW, OR IN THE EVENT THAT ANY LIMITED WARRANTY FAILS OF ITS ESSENTIALPURPOSE, IN NO EVENT WILL KENSINGTON’S ENTIRE LIABILITY EXCEED THE PURCHASE PRICE OF THIS PRODUCT. SOMESTATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTSAND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE AND PROVINCE TO PROVINCE.

Contacting KensingtonTroubleshooting information and answers to frequently asked questions are available 24 hours a day on the Kensington Website at www.support.kensington.com.

Support by Telephone Technical Support is available by telephone. Please visit www.kensington.com for hours.United States 1 800 535 4242 International Toll +31 53 484 9135

The Following Information is Only for EU-member States:The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent potential negativeconsequences for the environment and human health, which could otherwise be caused byinappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service

or the shop where you purchased the product.

Kensington and ACCO are registered trademarks of ACCO Brands. The Kensington Promise is a service mark of ACCO Brands.The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kensington is underlicense. Windows® XP is a registered trademark of Microsoft Corporation in the United States and/or other countries.Pentium® is a registered trademark of Intel Corporation. Mac® is a registered trademark of Apple Computer, Inc. © 2006 Kensington Computer Products Group, a Division of ACCO Brands. All rights reserved. 10/06

33348US_33x22.qxd 10/24/06 4:55 PM Page 2