~ .

USERMANUAL H+ Bluetooth 4.1 Headset

Security Precautions: ln order to have a proper and safety use of the headphone, please read this user manual in detail and keep it for future use. Be sura to notica the following guidelines when uslng you r headphone. 1. Should ad just volume and time reasonably when using the headphone. 2. Please stop using the headphone in potentially hazardaus situation to ensure your safety. . 3. Please avoid using headphone to listen to music, make or recerve calls to avoid distraction white driving. 4. Put this product and its aceesseries sornewhere out of the reach of children, to avoid a fatal danger caused by inappropriat_e use. . 5. Should keep water from entering the headphone dunng groomtng, which may cause damage to the sound quality or the headphone. 6. Should avoid tuming the volume so high that you can'~ hear . anything araund you. If you feel a tinnitus or the volume IS too hrgh, please reduce the volume. . . . 7. Stop using the headphone if you feel obvious discomfort, 1rntat1on or have other adverse reactions. 8. The headphone should not be stared or use at temperatures below -15oc (5F) or above 55C (131F) which may shorten headphone or battery life. Accessori es: Bluetooth headphone H+ 1 pe. User's manual 1 pe. USB charging cable 1 pe. Charger and battery; Please check the charging cable is orig inal or not betore charging the Bluetooth headphone. Warning: . Must use original charge cable to charge for the Bluetooth headphone, otherwise it may damage the headphone. Thus, voltage of charger must be 5V, electric current exceed 400mA (5V/400mA). Chargng: This headphone uses a non-detachable built-in rechargeable battery. ln order to prevant damage of the headphone, please do not remave

1

the battery. head hone has been switched off. . 1. Betore charging,_ make su~e th~g porf of headphone; plug t~e other 2. Plug USB cable .mto the c arg r er or other charging devrce. side of USB cable rnto the U~~- c~~ r~mains bright on the headphone. Charging will start and the re '9 kes a proximately up to 1.5-2 3. Charging time of h~adpbh?~~ t~ red li~ht switch off after charging hours, blue light rematns rrg 0 completed. Overview of H Bluetooth headphone:

SD card slot

Audio transfe port Pia /Pause button

Pairlng mode: Keep press the MF button until blue lights remains bright. Reconnection mode: Keep press the MF button until blue light blinks. Switch off: Keep press the MF button unti! blue light blinks, the headphone will be switched off. Btuetooth pairing: 1. Keep the distance between the headphone and mobile phone within 1 meter. The closer, the better. 2. Activate the headphone, ensure it antered topairing mode, blue lights remains bright. 3. lnitiate Bluetooth function of mobile phone (or other device needed

2

to be connected). Then "H+" will be shown on your phone. 4. Select "H+" and the headphone will automaticaily connect with your phone. (some mobile phones need you to input PIN "0000" as password) *Attention: Generally, there are 60 seconds at maximum to pair headphone with your phone, or the headphone will power off automaticaily when the light goes out. Please retry steps 1 to 4 to pair again if your operatien doesn't work. Disconnect the headphone with your phone: Switch off the headphone. Or close the 8\uetooth function of you r mobile phone. Or take the headphone from the phone to more than 20m (60ft) away. Reconnect the paired headphone: 1.Keep distan ce of the headset and mobile phone( or other device need to be connected) within 1 meter when pairing. 2.Activate the headset, entered to reconnection made. 3.Switch on Bluetooth function of your mobile phone(Android: Scan device), search "H+". 4.Your mobile phone will automaticaily connect with your headset, the blue light will blinks after reconnection. (Some mobile phone's Bluetooth menu support to set turn on headset automaticaily to establish a connection wi th the mobile phone) Answer a call: T ap the MF button on ce to answer the call or use you r mobile phone

to answer it Hang up a call: Tap the MF button once or use your mobile phone to hang up your call. Rej e ct a call : Keep press the MF button for araund 2 seconds, then release or use your mobile phone to rejact the call. Call wamng: (mobile phone needs to support this function) When phone 1 is n conversation, there comes a call from phone 2; press the MF button for araund 2 seconds. You can answer the call from phone 2; and keep the conversalion of phone 1. Last call redfaling : Double tap the MF button. Voice control: (mobiJe phone needs to support this function)

3

Keep pressing the MF button for 2 seconds, then release. Mute: Mute on: Keep press Vol-. Mute off: Keep press Vol+.

Cell phone APP For the Bluetooth Headphone H+, the EQ adjustmant and Volume a Iso other functions can be controlled by the APP on your phone. Please download the APP from Bluedio Offical Website:

www.bluedio.com.(So far, only the Android Version 4.0 can be used white the iOS version will be supported in the next stage. ) Micro-50 mode: 1.Piug in Micro-SD card. 2.Activate the headset, enters to reconnection mode; Or connect your headset with mobile phone via Bluetooth . 3.Keep press the Play/Pause button until green light remains bright, the headset will being in the Micro-SD card made. * If the headset doesn't connect with mobile phone via Bluetooth, it will not support Bluetooth conversation. * It will enter to Micro-SD card mode in priority if there is a card inside the headset, press mode button once can switch to FM mode. *It will switch to a ring and the blue light flashing rapidly if there is a call durng the Micro-SD card mode, and the headset will resume playing music after calling. Switch off Micro-50 mode: Keep pressing the playiPausa button about 4 seconds will go back to Bluetooth music mode.(if there is Bluetooth connection) FM mode: 1.Activate the headset, enters to reconnection mode; Or connect your headset with mobile phone via Bluetooth. 2. Keep pressing the play/Pause button about 4 seconds until the green light remains bright, the headset being in the FM mode. 3. Press the scan button once to search channels, green light blinks.(For first time usa/environment changed} 4 .1t takesaraund 2 minutes to finish searching, after green r~ght remains brght, press the play/Pausa button to adjust channeL( For first time usa/environment changed) !t the headset doesn't connect with moblle phone via Bluetooth, tt wm

4

not support Bluetooth conversation. . *It will enter to Micro-SD card mode in priority if th ere is a card inside i the headset, press mode button once can switch to FM mode , *It will switch to a ring and the blue light flashing rapidly if thereis a ! call during the FM mode, and the headset will resume playing music after calling. . Switch off FM mode: Keep pressing the play button until green light off. ; Control Bluetooth/Micro-50 and FM mode: : Play/Pause music: Press the MF button.(Bluetooth made) !, Play/Pause Micro-SD card/radio: Press the Play/Pause button.(Micro-1, SO/FM made) , Next track/channel: Push the Play/Pause button upwards. ; Pervicus track/channel: Push the Play/Pause button downwards. ; Volume up: Keep pushing the Play/Pause button upwards unti! it ' reach the appropriate volume .

Volume down: Keep pushing the Play/Pause button downwards until it reach the appropriate volume . Micro-50 card file transfer:

' Connect the headset(with Micro-SD card) with computer via USB , charging cable then files can be transferred between them.

Switch between Bluetooth, Micro-50 and FM mode: Change to Micro-SD or FM mode under Bluetooth mode: Stop Bluetooth music streaming ; then keep pushing the lever & push switch about 4 seconds until fhe green light remains bright. (It will enter to Micro-SD made in priority if the re is a card in side the headset). No te: *Press made button once may switch between micro-SD and FM mode. *Remove Micro-SD card under Micro-SD card made, headset will change to FM made. Insert Micro-SD ca~d under FM mod~, ~eadset will change to Micro-SD card mode. But 1t may affect funct1on of the headset. do not suggest the above usage.

5

FAQ 1.Headphone cannot palr wlth mobil~ phone. Solution: Please check whather your headphone is n pairing mode or reconnection mode, check whether Bluetooth search function of your mobile phone has been opened. Thus, check your mobile device's Bluetooth menu and de/ete/forget. the headphone, reconnect the headphone follawing instructions of user manual. 2.Headphone cannot be switch on. Solution: Please check the battery status of your headphone. 3. Can l change battery for the headphone? Solution: No, this headphone use a built-in non-detachable Li-Polymer battery, it cannot be removed. 4.Can l use headphone whlle driving? Solution: For safety reason, we strongly recommend not to use over-ear headphone to avoid dstraction whi/e driving. 5.Headphone d isconnect with your mobHe phone wfthin 10 meter. Solution: Please check if thereis metal or other material within relatively close range may intertere Bluetooth connection, as Bluetooth is a radio technology that is sensitive to objects between the headphone and the connected device. 6. Cannot hearlng a sound from your computer or moblle phone. Solution: Please check whather the output channel of your computer is Bluetooth Audio Device and Bluetooth function of your computer support A2DP profile. And please check volume of your headphone, and computer/mobile phone. 7. Cannot hearing a sound from source and audio streaming application. Solution: Check the source of streaming audio is on and playing. Or check that the device supports A2DP audio streaming. Or try other source l audio streaming a pp or try another track. Or check the Bluetooth device votume is at a high level and not muted. Or place the device to headphones (10 meters). Or take device and headphones away for any device that may causa interference, like other Bluetooth devices, cordiess phones, microwave ovens or wireless computer network reuters. Or reduce the number of applications running on the device. The audio quality will also beimproved by tuming off the Wi-Fi functionality of the device. .."~ 8. Cannot use the headphone to control volume or select track of APP of your moblfe phone. Solution: Software settings of APP may be varied led to some functions of the APP may not control by the headphone. 9. Cannot charge the headphone. Solution: Make sure both endsof the USB cable are securety coonected. If you use a power outlet, ensure that the power suppty ls connected securefy and the outlet works. If you use a computer, make suf& it is connected and the USB port is powerect. Tum oo the headset and then tum them off. Disconnect and reconnect the usa charglng cable .

6

Technical specltication: Drivers: 57mm speaker X 2 Transducer type: Dynamic Bluetooth version: V4.1 Operating distance: up to 10m (free space) Bluetooth profiles: A2DP, AVRCP, HSP, HFP lmpedance: 160 Frequency response: 20Hz-20kHz Sensitivity: 11 OdB Distorton: