Bitron Product Usage Directions
-
Upload
alex-w-fraser-alexwfrasertel -
Category
Documents
-
view
217 -
download
0
Transcript of Bitron Product Usage Directions
8/3/2019 Bitron Product Usage Directions
http://slidepdf.com/reader/full/bitron-product-usage-directions 1/2
GET BI-TRON
IN YOUR CA
NOW!BI-TRONIZING YOUR VEHICL
USING BI-TRON PRODUCTS
WILL NOTVOID WARRANTIES
STEP 1: ENGINE TREATMENT – THE CRANKCASE
Add Engine Formulation immediately! The optimum treatment ratio is10% Engine Treatment to oil an
it is compatible with all synthetic and non synthetic oils. For smaller passenger vehicles a typical
treatment might be as follows:
STEP 2: FUEL CONDITIONER – THE FUEL TANK
Bi-Tron Fuel Conditioner is compatible with all leaded and unleaded gasoline and all grades of diesel
STEP 3: POWERTRAIN & GEAR FORMULATION – THE TRANSMISSIONBi-Tron Powertrain and Gear Formulation is designed for manual and automatic transmissions
and will not cause slippage. It should be used at 6% Bi-Tron to the lubricant being treated.
Or simply, add one 236ml (8oz) bottle for every 4L of lubricant.
Oil changes should continue as per manufacturer’s recommendations. DO NOT OVERFILL CRANKCASE.
1. Add two 236ml (8oz) bottles of Bi-Tron Engine Formulation to your vehicle’s crankcase
for every 5L of oil capacity – check the condition of the oil frequently (especially during
the first 200-800km (100-500mi)) and change it as soon as it is dirty, or the next time your
vehicle is due for an oil change.
2. At the next regular oil change and thereafter – change the filter and add one 236 ml (8 oz)
bottle of Bi-Tron Engine Formulation to every 5L of new oil.
1. On your first tank of fuel – add 180 ml (6 oz - half a bottle) of Bi-Tron Fuel Conditioner
directly to the fuel tank for every 40L(10 gallons) of fuel.
2. On your second and third tanks of fuel – add 90 ml (3 oz–¼ bottle) for every 40L
(10 gallons).
3. On subsequent fill-ups – add 30-60 ml (1-2 oz) of Bi-Tron Fuel Conditioner for every 40L
(10 gallons) of fuel.
For smaller passenger vehicles a typical treatment might be as follows:
1. Steering Box – Add 60 ml (2 oz) of Bi-Tron Powertrain.
2. Differential – Add 120 ml (6 oz) of Bi-Tron Powertrain.
3.Transmission – Add 180 ml (8 oz) of Bi-Tron Powertrain.
If you are uncertain of the location of your steering box, differential, or transmission, or you
have difficulty installing the Powertrain & Gear Formulation, ask your mechanic to put it in at
the next oil change.
Alex W Fraser, Courtenay, BC
866-517-2113
www.freegas.bitronglobal.com
8/3/2019 Bitron Product Usage Directions
http://slidepdf.com/reader/full/bitron-product-usage-directions 2/2
STEP 4:TIRE SAFETY SOLUTION – THE TIRES
Bi-Tron Tire Safety Solution is a non flammable and non toxic liquid tire treatment designed as a
preventative measure to seal punctures permanently in the tread of the tire up to 1/4" in diameter. It
suitable for passenger cars, SUVs, light trucks and motorcycles with a tire pressure of up to 60 psi.
STEP 5: OCTANE BOOSTER – THE FUEL TANK Bi-Tron Octane Booster is a super concentrated performance formula designed to
increase power. Use it when towing heavy loads, RVs, boats, trailers or even when you
have a full vehicle. It is also perfect for off-road and racing applications! Bi-Tron Octane
Booster is a proprietary blend of technologies designed to dramatically improve the way
your fuel burns releasing more energy and providing more power to the wheels.
STEP 6: PENETRATING LUBRICANT – AROUND THE HOME AND THE WORKSHOP
1. Ensure tires are properly balanced.
2. Shake the bottle thoroughly.
3. Park the vehicle near an available source of pressurized air and so that the valve stem is in
either the 5 o'clock or 7 o'clock position. Using the tool provided with the bottle remove the
valve stem core allowing all the air to escape from the tire.
4. Snip 1/4" off the top of the plastic spout provided with the sealant.
5. Attach the supplied plastic hose to the top of the bottle spout and slide the other end firmly
over the tire's stem. Tilt the bottle to the upright position and in a rhythmic motion slowly
squeeze and release the bottle pumping the required amount of product into the tire.
6. Replace the valve core and re-inflate the tire to the recommended pressure.
7. Drive the vehicle to complete install. Tires do not need to be repaired after a puncture.
Add one 2 oz bottle for every 10 gallons (40L) of fuel before you refuel for best results.
Apply Bi-Tron Penetrating Lubricant as needed to any metal mechanism. The application and
benefit range is huge. It can be used for the simplest home needs or the most challenging
industrial applications. Bi-Tron Penetrating Lubricant is highly recommended for general
machine shop work, drilling and tapping. The Penetrating Lubricant does not collect dust, in
fact it actually keeps wear particles away from the metal surface!
RECOMMENDED AMOUNT PER TIRE mL oz
Motorcycles 120 4
Passenger Car 13" & 14" Tires 120 4
Passenger Car 15" & 16" Tires 120 5
16
14
12
10
8
6
4
2
0
1 2 3 4 5 6
C R A N K C A S E C A P A C I T Y ( L )
236ml (8oz) BOTTLES
35
30
25
20
15
10
5
0
1 2 3 4 5 6 7 8
MIX OF POWERTRAIN TO
LUBRICANT CAPACITY IN LITERS
T R A N S M I S S I O N C
A P A C I T Y ( L )
236ml (8oz) BOTTLES
200
180
160
140
120
100
80
60
40
20
0
20 40 60 80 100 120 140 160
AMOUNT OF FUEL CONDITIONER
TO USE PER LITER OF FUEL
m l O F F U E L C O N D I T I O N E R
O U N C E S O F F U E L C O N D I T I O N E R
LITERS OF FUEL
14
12
10
8
6
4
2
0
10 20 30 40 50 6
AMOUNT OF FUEL CONDITIONE
TO USE PER GALLON OF FUEL
GALLONS OF FUEL
MIX OF ENGINE TREATMENT TO
CRANKCASE OIL CAPACITY IN LITERS
Bi-Tron Penetrating Lubricant is a scientifically blended formula containing the uniqueBi-Tron metal treatment, which coats and protects metal with a layer of polarized oil.
This product has no equal in the world whenever rust, corrosion or friction is a factor.
Bi-Tron Penetrating Lubricant not only penetrates through extreme rust and corrosion,
it also treats the metal surface with a polarized layer of oil molecules to reduce friction
and wear and retard future corrosion.