Bitron Heat Exchanger
9
The new Heat Exchanger
-
Upload
bitron-hvac-systems -
Category
Marketing
-
view
2.404 -
download
1
Transcript of Bitron Heat Exchanger
The new Heat Exchanger
A Made in Italy product The Condensing primary Heat Exchanger is entirely developed and produced in Italy by Bitron in Collegno (Turin) which is the Competence and Excellence Center for BITRON HVAC Systems Division, part of the Bitron Group. Flexible and Customizable The Bitron Heat Exchanger is an innovative product in the boiler market: it is flexible and easy to customize. Flexibility is particularly obvious when looking at the exhaust pipe layout and the hydraulic connections. Both offer the advantage of easy combinations at the early stage of a new boiler design but also on existing products.
Aluminium: a flexible and light raw material
The Bitron Heat Exchanger is entirely in aluminum, a raw material that is superior to steel in terms of thermal conductivity and also lighter compared to any other material. Aluminum also provides a competitive alternative to guarantee stable costs, compared to other materials affected by raw material speculation.
The Bitron Heat Exchanger also allows the standardization of the water and exhaust pipe connections. The front burner flange is also compatible with the majority of existing applications in the market. Such flexibility reduces any impact in terms of design when customers want to switch from any heat exchanger to the Bitron one.
Maximum compatibility
The intelligent hook fastening system to install the Bitron Heat exchanger in the boiler represents another advantage during the first installation, for maintenance and for replacement in the field. The unique-bracket system, common to all heat exchanger sizes, differentiates the Bitron Heat Exchanger from the competition.
Simplicity of installation
Customization of water connections
Water connections can be customized and represent a huge benefit as the Bitron Heat exchanger can tough be connected to any Hydro block in the market allowing removal of useless brass and copper pipes.
A unique spiral pipe design
The unique-pipe design of the Bitron Heat Exchanger differs from all the others as it has a very low pressure loss requiring a smaller pump (saves up to 0,1 bar), and ensures a lower clogging risk. The Bitron Heat Exchanger gives customers the opportunity to improve the reliability of their applications.
The innovative function of fast evacuation of the fumes in the combustion chamber allows an important reduction of CO / NOx emissions compared to past and present applications in the market. The innovative spirals and the combustion chamber volume also allow outstanding results in terms of emissions reduction.
Emissions reduction
