BIOGRAPHY Sangchul Bang 10/2012€¦ · Administrative Experience Chairman, Materials Engineering...

BIOGRAPHY

Sangchul Bang 10/2012

Professor, Department of Civil and Environmental Engineering

South Dakota School of Mines & Technology

Rapid City, South Dakota 57701

Tel. 605-394-2440 office

605-394-5171 fax

605-343-5835 home

E-mail address: [email protected]

Personal Information

Born: March, 1950, Seoul, Korea

Family: Married, two children

Education

B.S. Seoul National University, Korea, 1972

M.S. University of California, Davis, 1978

Ph.D. University of California, Davis, 1979

Professional Experience

Trainee, Gulf Oil Company of Korea, June 1971 - March 1972.

Ensign & Lieutenant Junior, Korean Navy Construction Battalion, July 1972 - June 1975.

Engineer, Dong-Bang Construction Co. of Korea, July 1975 - March 1976.

Teaching Assistant, University of California, Davis, October 1976 - June 1978.

Post Graduate Research Engineer, University of California, Davis, July 1977 - August 1979.

Associate-In, University of California, Davis, January 1979 – June 1979.

Assistant Professor, University of Notre Dame, September 1979 - August 1985.

Associate Professor, South Dakota School of Mines & Technology, August 1985 - June 1990.

Professor, South Dakota School of Mines & Technology, July 1990 – present.

Visiting Senior Faculty, Naval Civil Engineering Laboratory, May 1994 - July 1994.

Adjunct Professor, Kookmin University, Korea, Sep. 2009 – June 2010.

Administrative Experience

Chairman, Materials Engineering and Science Advisory Council, South Dakota School of Mines

and Technology, June, 1989 - June, 1990 and August, 1993 - June, 1994.

Coordinator, Geotechnical Graduate Program, Department of Civil Engineering, South Dakota

School of Mines and Technology, September, 1989 - 1994.

Interim Head, Department of Civil Engineering, South Dakota School of Mines and Technology,

February, 1992 - July, 1992.

Interim Dean, College of Earth Systems, South Dakota School of Mines and Technology, April

1994 - June 1995, July 2002 – June 2003.

Dean, College of Earth Systems, South Dakota School of Mines and Technology, July 1995 –

June 2002.

Professional Affiliations

Member, American Society of Civil Engineers, - 2010

Member, International Society of Soil Mechanics and Foundation Engineering, - 2010

Member, Transportation Research Board

Member, Korean Scientists and Engineers Association in America, - 2011

Member, International Society of Offshore and Polar Engineering

Contact Member, United States Universities Council on Geotechnical Engineering Research

University Representative, Transportation Research Board

Service to Professional Societies

Reviewer, Journal of Geotechnical Engineering, American Society of Civil Engineers

Reviewer, Journal of Geotechnical and Geoenvironmental Engineering, Geo-Institute, American

Society of Civil Engineers

Reviewer, Transportation Research Board, National Research Council

Reviewer, National Science Foundation

Reviewer, Geotechnical Testing Journal, American Society for Testing and Materials

Reviewer, Journal of Waterway, Port, Coastal and Ocean Engineering, American Society of Civil

Engineers

Reviewer, Sixth International Conference on Geosynthetics

Reviewer, ASCE GED Specialty Conference on Uncertainty in the Geological Environment:

From Theory to Practice, 1996.

Reviewer and Session Organizer, International Conference on Offshore and Polar Engineering,

1998- .

Reviewer and Session Organizer, International Conference on Ocean Mechanics and Arctic

Engineering.

Reviewer, Journal of Offshore Mechanics and Arctic Engineering, American Society of

Mechanical Engineers

Reviewer, International Journal of Offshore and Polar Engineering

Reviewer, Journal of Applied Ocean Research

Reviewer, Journal of Engineering for the Maritime Environment

Reviewer, Journal of Ocean Engineering

Reviewer, KSCE Journal of Civil Engineering

Reviewer, Journal of Cold Regions Engineering

Reviewer, Canadian Geotechnical Journal

Member, Transportation Research Board Committee A2K04, Subsurface Soil-Structure

Interaction, 1981-1992.

Member, Transportation Research Board Committee AFS50, Modeling Techniques in

Geomechanics, 1993 - 2004.

Member, Transportation Research Board Committee AFS03, Foundations of Bridges and Other

Structures, 2005 - 2008.

Member, Technical Programs Committee, International Society of Offshore and Polar

Engineering, 1998 – .

Member, Soil Improvement Committee, Geotechnical Institute, 1998 – 2010.

Member, Ocean Engineering Symposium Scientific Committee, Ocean Mechanics and Arctic

Engineering, American Society of Mechanical Engineers, 2005 - 2009.

Councilor, Korean Scientists and Engineers Association, 1999 – 2002.

Panel Reviewer, National Science Foundation, Model Based Simulation Program, 2000.

Panel Member, Special Session on Soil Nailing, International Symposium on Earth

Reinforcement, Fukuoka, Japan, Nov., 2001.

Panel Reviewer, National Science Foundation, IIA Program, 2002 and 2012.

Panel Reviewer, National Science Foundation, CAREER proposals review panel, 2008

Member, International Design and Construction Advisory Group, Korea Expressway

Corporation, 2008 - 2010.

Member, Foreign Advisory Committee, Kookmin University, Korea, 2008 - 2012.

Co-editor, Proceedings of the International Conference on Offshore and Polar Engineering, 2009.

Editor-in-Chief, International Journal of Geo-Engineering, 2010 - .

Associate Editor, Korean Society of Civil Engineers Journal of Civil Engineering, 2011 - .

Professional Registration

Professional Engineer, South Dakota (Registration No. 4409)

Honors

Presidential Outstanding Professor Award, South Dakota School of Mines and Technology, 2004

Honorary Member of Editorial Board, Korean Society of Civil Engineers, 2000 - 2001

Honorary Member of Editorial Board, Korean Geotechnical Society, 2002 - 2003

Overseas Member, National Academy of Engineering, KOREA, 2002- .

Distinguished Alumni Award, Civil Engineering Alumni Association, Seoul National University,

Korea, 2009.

KGS Award, Korean Geotechnical Society, 2011

Patent

Patent disclosure in Korea, “Application of Microbial Calcite to Fiber Reinforced Soils.”

Inventors are Sookie S. Bang, Sangchul Bang, and Lotte E&C, 2012.

Consulting

Shilts, Graves and Associates, South Bend, IN

Ellsworth Air Force Base, Ellsworth, SD

Town of Nisland, SD

South Dakota Department of Transportation

South Dakota Department of Water and Natural Resources

Augustsson Construction Co., Los Angeles, CA.

Morrison-Knudsen Engineers, Inc., San Francisco, CA

CE & MT, Gillette, WY

Jacobs Associates, San Francisco, CA

Harding, Larson and Associates, San Francisco, CA

Twin City Testing, St. Paul, MN

PMB Bechtel Engineering Inc., San Francisco, CA

Naval Civil Engineering Laboratory, Port Hueneme, CA

Naval Facilities Engineering Command, Alexandria, VA

VSE Corporation, Alexandria, VA

Dong-A Geological Engineering Inc., Korea

Naval Facilities Engineering Service Center, Port Hueneme, CA

Kyung In Engineering, Korea

Golder Associates, Lakewood, CO

Structural Safety Research Center, Korea

Daewoo Engineering and Construction Co., Korea

POSCO Construction Co., Korea

MAR Inc., Ventura, CA

Daewoo Institute of Construction Technology, Korea

Korea Expressway Corporation

Korea Ocean Research and Development Institute, Korea

AdvaCT Inc., Korea

Korea Electric Power Research Institute, Korea

Areas of Teaching

Soil Mechanics

Foundation Engineering

Engineering Mechanics

Numerical Methods

Courses Taught

Undergraduate: Introduction to Engineering, Statics, Strength of Materials, Soil Mechanics

Laboratory, Soil Mechanics, Foundation Engineering, Geotechnical Engineering I,

Geotechnical Engineering II

Graduate: Theoretical Soil Mechanics, Applied Soil Mechanics, Soil Dynamics, Stability of

Slopes, Advanced Soil Mechanics Laboratory, Numerical Methods, Advanced

Foundations, Advanced Soil Mechanics I, Advanced Soil Mechanics II

Graduate Theses and Reports Advised

"A General Analysis of an Earth Reinforcing System for Deep Excavations," by J. W. Karmozyn,

1980, 55 pages (M. S. Report).

"Investigation of Spile Reinforced Tunnel in Soft Grounds," by Y. M. A-Aish, 1982, 170 pages

(M. S. Thesis).

“Stability Analysis of the Spiling Reinforcement System in Soft Ground Tunneling,” by M. A. A-

Rahman, 1982, 86 pages (M. S. Thesis).

"Development of Lateral Earth Pressures Along a Pile Subjected to Lateral Loading in

Cohesionless and Cohesive Soils," by H. T. Kim, 1984, 80 pages (M. S. Report).

"Effect of Compaction on Lateral Earth Pressure Behind Retaining Wall," by T. K. F. Tsang,

1984, 69 pages (M. S. Report).

"Analysis of a Reinforced Earth Wall with Epoxy-Coated Strips," by S. Ludlow, 1987, 101 pages

(M. S. Thesis).

"Lateral Earth Pressure Development Behind Rigid Walls," by H. T. Kim, 1987, 155 pages

(Ph.D. Thesis).

"Analysis and Design of an In-Situ Lateral Earth Support System," by Y. I. Chung, 1988, 69

pages (M. S. Thesis).

"Analytical Parametric Study of Reinforcing Distressed Bridge Abutments," by S. Schelske,

1988, 128 pages (M. S. Thesis).

"Analysis of Prefabricated Wick Drains by Uncoupled Finite Strain Consolidation Theory," by P.

Zhao, 1989, 104 pages (M. S. Thesis).

"Design and Analysis of Bulkhead Bridge Abutment Reinforced with Tie-Backs," by D. Wu,

1989, 108 pages (M. S. Thesis).

"Active Lateral Earth Pressures Behind Retaining Structures with Interposed Backfill Soil

Wedge," by J. D. Tucker, 1990, 70 pages (M. S. Thesis).

"Parametric Study of Bridge Abutment Reinforcement," by H. Yeon, 1990, 120 pages (M. S.

Thesis).

"Analytical Investigation of Soil Nailing Technique," by J. Kim, 1990, 120 pages (M. S. Thesis).

"Lateral Earth Pressure Development Against Rigid Retaining Walls with Translational

Movement," by L. Wang, 1990, 154 pages (M. S. Thesis).

“Simulation of Panel Facing Wall with a Membrane Element in Finite Element Analysis of a

Reinforced Retaining Wall,” by W. Nyaz, 1991, 181 pages (M. S. Thesis).

“Analysis of Seepage with Inclined Boundary by Finite Difference Method,” by L. Shao, 1991,

71 pages (M. S. Thesis).

"Analytical Study of Laterally Loaded Cast-In-Drilled-Hole Piles," by Y. Wei, 1992, 134 pages

(M. S. Thesis).

"Parametric Study of a Soil Nailing Technique," by P. Kroetch, 1992, 86 pages (M. S. Thesis).

"Analysis of Overall Stability of Soil Nailing Systems," by D. A. Erickson, 1992, 78 pages (M. S.

Thesis).

"Behavior of Retaining Wall With EPS Blocks as Backfill," by Y. Cho, 1992 181 pages (M. S.

Thesis).

"Effect of Geogrid Reinforcement on Seepage Through Earth-Fill Dam Cores," by G. H.

Gregory, 1993, 78 pages (M. S. Thesis).

“Use of Finite Element Method of Estimation of Lateral Earth Pressures Behind Cantilever

Retaining Walls with Interposed Material,” by X. Gu, 1994, 66 pages (M. S. Thesis).

“An Investigation of Mooring Lines in Cohesive Seafloor,” by J. Yu, 1995 161 pages (M. S.

Thesis).

“Approximate Finite Element Solutions of Earth Reinforcement System,” by J. Park, 1996, 124

pages (M. S. Thesis).

“Use of Suction Piles for Mooring of Mobile Offshore Bases,” by G. D. Smith, 1998, 170 pages

(M. S. Thesis).

“Verification of Mooring Line Analysis,” by H. Han, 1999, 200 pages (Ph.D. Dissertation).

“Analytical Parametric Study of Utilizing Expanded Polystyrene Blocks in Stabilizing Slopes,”

by N. Nayeemuddin, 2000, 79 pages (M.S. Thesis).

“Calibration of Installation, Analytical Performance Study, and Analytical Solution of Loading

Capacity of Suction Piles,” by Y. Cho, 2001, 280 pages (Ph.D. Dissertation).

“Calibration of Mooring Line Analysis in Sandy Soil,” by R. Richardson, 2002, 114 pages (M.S.

Thesis).

“Analysis of Geofiber-Reinforced Soils with Bilinear Constitutive Relationship,” by T. Swe,

2002, 129 pages, (Ph.D. Dissertation).

“Pullout Capacity Analysis of Embedded Suction Anchors,” by S. Boonyong, 2003, 189 pages,

(M.S. Thesis).

“Retrieval of Suction Piles,” by K. Jones, 2003, 90 pages, (M.S. Thesis).

“Validation of Analytical Solution for the Prediction of Ultimate Horizontal Bearing Capacity of

Rigid Piles,” by John Leahy, 2004, 140 pages, (MS Thesis).

“Pull-out Capacity of Embedded Suction Anchors,” by Kasey Jones, 2006, 168 pages, (Ph.D.

Dissertation)

“Quality Base Material Produced Using Full Depth Reclamation on Existing Asphalt Pavement

Structure - Literature Review,” by Benjamin Hauser, 2007, (MS Report).


Structure - State Specifications and Construction Experiences,” by Nicole Nielsen, 2007, (MS

Report).

“Performance Study of U.S. Highway 18,” by Wade A. Lein, 2008, 84 pages, (MS Thesis).


Structure – Development of Full Depth Reclamation Mix Design Guide,” by Beth Comes and

Leah Nehl, 2009, 55 pages, (MS Report).

“Quality Road Base Stabilization Techniques Using Full Depth Reclamation on South Dakota

Highway 73,” byMichael Jordan Lee deStigter, 2009, 184 pages, (MS Thesis).

“Development of FDR Laboratory Tests: Modulus of Rupture, Dynamic Modulus and Repeated

Load Triaxial Testing,” by Christopher Leibrock, 2010, 63 pages, (MS Thesis).

“Monitoring of Performance of SD 73 Field Test Sections and Laboratory Moisture Conditioning

Tests with Full Depth Reclamation,” by Joshua Anderson, 2010, 115 pages, (MS Thesis).

“Development of FDR Laboratory Tests: Dynamic Modulus and Repeated Load Triaxial Test,”

by Paul Kraft, 2010 (MS Thesis).

“Mechanistic-Empirical Pavement Design: Materials Testing of Resilient and Dynamic

Modulus,” by Jon Fairchild, 2010 (MS Report).

Research Background and Interests

Main area of research interests is in the field of soil-structure interaction problems with

mathematical modeling, numerical solution techniques and centrifuge model studies.

Applications of finite element formulations, limiting stress equilibrium methods, and centrifuge

studies have been developed in the areas of soft ground spiling tunnel reinforcement, oil storage

tank foundation reinforcement and deep excavation support systems.

Current research includes cast-in-drilled-hole-piles in sloping grounds, prefabricated wick drains

in compressible deposits, movement dependent lateral earth pressure development, generalized

plane strain method of geotechnical analysis, epoxy-coated reinforcing strip characterization,

landslide prevention, distressed bridge abutment reinforcement, bulkhead reinforcement, soil

failure criteria characterization, application of Expanded Polystyrene Blocks in geotechnical

engineering, soil dynamics of drag anchors, application of suction anchor piles in shallow/deep

water, embedded suction anchors for offshore structures, and asphalt pavement recycling through

full depth reclamation.

Grants and Contracts

"Soil Reinforcement in Soft Ground Tunneling," U. S. Department of Transportation, $106,279,

June 1981 to October 1982, Principal Investigator.

"Lateral Resistance of Cast-In-Drilled Hole Piles in Sloping Ground," California Department of

Transportation, $83,972, June 1981 to June 1983, Research Engineer.

"Engineering Research Equipment: Soil-Structure Test Facility," National Science Foundation,

$57,540, June 1982 to May 1984, Co-Principal Investigator.

"Metal Culverts with Slotted Bolt Holes," Federal Highway Administration, $89,897, September

1982 to November 1984, Co-Principal Investigator.

"Design and Analysis of Reinforcing Distressed Bridge Abutments," South Dakota Department

of Transportation, $81,342, Mar. 1987 to Oct. 1988, Principal Investigator.

"Study of Prefabricated Wick Drains," South Dakota School of Mines and Technology, $4,467,

July, 1987 to June 1988, Principal Investigator.

"Used Energy-Related Laboratory Equipment Program," U. S. Department of Energy, $7,222,

Oct. 1987 to Sept. 1988, Principal Investigator.

"Investigation of Bulkhead Bridge Abutments," South Dakota Department of Transportation,

$69,826, Sept. 1988 to Aug. 1990, Principal Investigator.

"Analytical Parametric Study of A Tied-Back System for Reinforcing Distressed Bridge

Abutments," South Dakota Department of Transportation, $30,174, June 1989 to Dec. 1990,

Principal Investigator.

"Characterization of Soil Failure Criterion for Limiting Equilibrium Method of Analysis,"

National Science Foundation and State of South Dakota $67,477, May 1990 to Apr. 1993,


"Geotechnical Engineering Application of Expanded Polystyrene Blocks," Governor's Office of

Economic Development, $34,482, Sept. 1991 to Sept. 1994, Principal Investigator.

"Performance Evaluation of Bridge Abutments with Tie-Backs," South Dakota Department of

Transportation, $5,026, July 1993 to Dec. 1995, Principal Investigator.

"Material Testing for SHRP SPS-8," South Dakota Department of Transportation $1,500, Apr.

1993 to June 1993, Principal Investigator.

"Analysis of Plow Performance Data," Naval Civil Engineering Laboratory, $2,500, Aug. 1993 to

Oct. 1993, Principal Investigator.

"Anchor Mooring Line Analysis," Naval Facilities Engineering Command, $26,960, Nov. 1993

to Sept. 1994, Principal Investigator.

“Anchor Mooring Line Analysis - Phase II,” Naval Facilities Engineering Command, $22,000,

Dec. 1994 to Sept. 1995, Principal Investigator.

“Otter Board Penetration Study,” Naval Facilities Engineering Service Center, $7,490, Mar. 1995

to May 1995, Principal Investigator.

“Analysis of Buried Cables in Seafloor,” Naval Facilities Engineering Service Center, $4,990,

Mar. 1996 to May 1996, Principal Investigator.

“Application of Fiber Reinforced Soil in Pavement Subgrade,” Synthetic Industries, $15,000,

Dec. 1996 to June 1997, Principal Investigator.

“Use of Suction Piles for Mooring of Mobile Offshore Bases,” Office of Naval Research

$234,400, June 1997 to Aug., 2001, Principal Investigator.

“Use of Suction Pile for Mooring of Mobile Offshore Bases,” Office of Naval Research,

Additional Funding, $112,000, Jan. 1998 to Aug., 2001, Principal Investigator.

“Proposal Enhancement Program,” NSF EPSCOR, $3,000, Apr. 1998 to Feb., 1999, Principal

Investigator.

“KSAAP Application,” NAFSA Association of International Educators, $5,000, Nov. 1998 to

June, 1999, Principal Investigator.

“Use of Suction Pile for Mooring of Mobile Offshore Bases,” Office of Naval Research,

Additional Funding, $50,000, July 1999 to Aug., 2001, Principal Investigator.

“KSAAP Application,” NAFSA Association of International Educators, $2,135, Sept., 1999 to

June, 2000, Principal Investigator.

“Effect of Point of Loading on Lateral Resistance of Rigid Piles,” National Science Foundation,

$193,932, June 2001 to May 2005, Principal Investigator.

"Effect of Point of Loading on Lateral Resistance of Rigid Piles,” National Science Foundation,

Additional Funding, $6,250, June 2001 to May 2005, Principal Investigator.

“Suction Pile Retrieval,” National Science Foundation, $25,000, June 2002 to May 2003,



Additional Funding, $6,250, Feb. 2003 to May 2005, Principal Investigator.


Additional Funding, $12,500, Oct. 2004 to May 2005, Principal Investigator.

“Quality Base Material Produced Using Full Depth Reclamation on Existing Pavement

Structure,” Federal Highway Administration, $1,271,250, Sep. 2006 to July, 2012, Principal

Investigator.

“Microbial Dust Suppression,” National Science Foundation, $38,092, July 2007 to June 2009,

Co-Principal Investigator.

“Microbial Dust Suppression,” National Science Foundation, Additional Funding, $12,500,

August 2007 to June 2009, Co-Principal Investigator.

“Microbial Dust Suppression,” National Science Foundation, Additional Funding, $12,250, April

2008 to June 2009, Co-Principal Investigator.

“Development of Geo-Biological Dust Control Technique for Construction Sites,” Samsung

Corporation, KOREA, $200,000, June 2008 to Dec. 2010, Co-principal Investigator.

“Microbial Dust Suppression,” National Science Foundation, Additional Funding, $7,939, March

2009 to June 2009, Co-Principal Investigator.

“Application of Microbial Calcite to Fiber Reinforced Soils, Phase I” Lotte E&C, KOREA,

$65,000, June 2011 to June 2012, Co-principal Investigator.

“Application of Microbial Calcite to Fiber Reinforced Soils, Phase II” Lotte E&C, KOREA,

$70,000, July 2012 to June 2013, Co-principal Investigator.

Publications

(1) Thesis

Bang, S., "Analysis of a Lateral Earth Support System," University of California, Davis, M. S.

Thesis, April 1978.

Bang, S., "Analysis and Design of Lateral Earth Support System," University of California,

Davis, Ph.D., Thesis, September 1979.

(2) Articles in Journals

Bang, S., C. K. Shen, and K. M. Romstad, "Analysis of an Earth-Reinforcing System for Deep

Excavation," Transportation Research Record No. 749, 1980, pp. 21-26.

Shen, C. K., S. Bang, and L. R. Herrmann, "Ground Movement Analysis of an Earth Support

System," American Society of Civil Engineers, Vol. 107, GT12, Dec. 1981, pp. 1609-1625.

Shen, C. K., S. Bang, K. M. Romstad, L. Kulchin, and J. S. DeNatale, "Field Measurements of an

Earth Support System," American Society of Civil Engineers, Vol. 107, GT12, Dec. 1981, pp.

1625-1643.

Shen, C. K., Y. S. Kim, S. Bang, and J. F. Mitchell, "Centrifuge Modeling of Lateral Earth

Support," American Society of Civil Engineers, Vol. 108, GT9, September 1982, pp. 1150-1164.

Bang, S., "Analysis of a Spiling Reinforcement System in Soft Ground Tunneling,"

Transportation Research Record, No. 945, 1984, pp. 45-51.

Bang, S., "Limit Analysis of a Spiling Reinforcement System in Soft Ground Tunneling,"

International Journal for Subsurface Use, No. 3, August 1984, pp. 140-146.

Bang, S., "Active Earth Pressure Behind Retaining Walls," Journal of Geotechnical Engineering,

ASCE, Vol. 111, No. 3, March 1985, pp. 407-412.

Bang, S., "Limit Equilibrium Stability Analysis of Spiling Soil Reinforcement in Tunneling,"


Bang, S. and S. I. Hwang, "Transition of Active Lateral Earth Pressures Behind Retaining

Walls," Journal of Computers and Geotechnics, Vol. 2, No. 4, 1986, pp. 219-238.

Bang, S. and H. T. Kim, "At-Rest to Active Earth Pressure Transition," Transportation Research

Record, No. 1105, 1987, pp. 41-47.

Bang, S., S. Ludlow, and V. Bump, "Performance of Epoxy-Coated Reinforced Earth Strips,"

Journal of Construction and Building Materials, Vol. 1, No. 4, December 1987, pp. 194-198.

Bang, S. and H. T. Kim, "Passive Lateral Earth Pressure Development Behind Rigid Walls,"


Shen, C. K., S. Bang, J. DeSalvatore, and C. J. Poran, "Laterally Loaded Cast-In- Drilled-Hole

Piles," Transportation Research Record, No. 1191, 1989, pp. 155-165.

Bang, S. and C. K. Shen, "Analytical Study of Laterally Loaded Cast-In-Drilled-Hole Piles,"


Bang, S. and H. Yeon, "Analysis of Retaining Structures with Skew Reinforcements,"

Transportation Research Record, No. 1288, 1990. pp. 152-157.

Bang, S., C. K. Shen, J. Kim, and T. Kroetch, "Investigation of Soil Nailing Systems"

Transportation Research Record, No. 1369, 1993., pp. 37-43.

Preber T., S. Bang, Y. Chung, and Y. Cho, "Behavior of Expanded Polystyrene Blocks,"

Transportation Research Record, No. 1462, 1995, pp. 36 - 46.

Bang, S., R. J. Taylor, Y. Jie, and H. T. Kim, “Analysis of Anchor Mooring Line in Cohesive

Seafloor,” Transportation Research Record, No. 1526, 1996, pp 47-56.

Bang, S., “Soil Nailing System - Overview and Future,” L G Construction Technology Review,

Special Invited Paper, Vol. 14, Jul, 1997, pp. 13-34.

Bang, S., H. Han, and R. J. Taylor, “Calibration of Analytical Solution Using Centrifuge Model

Tests on Mooring Lines,” International Journal of Offshore and Polar Engineering, Vol. 10, No.

3, Sept.2000, pp. 236-240.

Bang, S., T. Preber, Y. Cho, J. Thomason, S. R. Karnoski, and R. J. Taylor, “Suction Piles for

Mooring of Mobile Offshore Bases,” Journal of Marine Structures, Vol. 13, 2000, pp. 367-382.

Bang, S., H. Han, and R. J. Taylor, “Development and Validation of Mooring Line Analysis in

Cohesive Seafloor,” International Journal of Offshore and Polar Engineering, Vol.11, No. 2,

June 2001, pp. 141-146.

Bang, S. and Y. Cho, "Ultimate Horizontal Loading Capacity of Suction Piles, "International

Journal of Offshore and Polar Engineering, Vol. 12, No. 1, Mar., 2002, pp. 56-63.

Cho, Y., S. Bang, and T. Preber, "Transition of Soil Friction During Suction Pile Installation,"

Canadian Geotechnical Journal, Vol. 39, No. 5, Oct. 2002, pp. 1118-1125.

Cho, Y., S. Bang, S. R. Karnoski, and R. J. Taylor, “Field Validation of Soil Friction Transition

During Suction Pile Installation,” International Journal of Offshore and Polar Engineering, Vol.

12, No. 4, Dec. 2002, pp. 311-315.

Bang, S. and Y. Cho, "Analytical Validation of Pull-out Loading Capacity of Suction Piles in

Clay," Transportation Research Record, No. 1808, Dec., 2002, pp. 180-185.

Bang, S., K. Jones, and Y. Cho, “Transition of Soil Strength During Suction Pile Retrieval in

Sand,” International Journal of Offshore and Polar Engineering, Vol. 15, No. 2, June, 2005, pp.

155-159.

Bang, S., S. Boonyong, and Y. Cho, “Field Installation and Pullout Test of Embedded Suction

Anchors,” Transportation Research Record, No. 1936, 2005, pp. 117-123.

Bang, S., Y. Cho, and W. S. Park, “A New Breakwater System with Suction Piles,” Sea

Technology, Vol. 47, No. 4, 2006, pp. 15-21.

Bang, S., J. C. Leahy, Y. Cho, and O. Kwon, "Horizontal Bearing Capacity of Suction Piles in

Sand," Transportation Research Record, No. 1975, 2006, pp. 21-27.

Jones, K. D., S. Bang, and Y. Cho, “Pullout Capacity of Embedded Suction Anchors in Sand,”

Journal of Ocean Engineering, Vol. 34, No. 16, 2007, pp. 2107-2114.

Bang, S., K. D. Jones, Y. Cho, and D. J. Kwag, “Suction Piles and Suction Anchors for Off-shore

Structures,” Deep Foundations Institute Journal, Vol. 3, No. 2, Nov., 2009, pp. 3-13.

Kwag, D. J., I. H. Cho, S. Bang, and Y. Cho, “Embedded Suction Anchors for Mooring of a

Floating Breakwater,” Journal of Offshore Mechanics and Arctic Engineering, Vol. 132, No. 2,

May, 2010.

Bang, S., K. Jones, Y. S. Kim, and Y. Cho, “Horizontal Capacity of Embedded Suction Anchors

in Clay, “Journal of Offshore Mechanics and Arctic Engineering, Vol. 133, No. 1, Feb., 2011, pp.

1-7.

Bang, S., K. D. Jones, K. O. Kim, Y. S. Kim, and Y. Cho, “Inclined Loading Capacity of Suction

Piles in Sand,” Journal of Ocean Engineering, Vol. 38, No. 7, May 2011, pp. 915-924.

Bang, S., S. H. Min, and S. S. Bang, “Application of Microbiologically Induced Soil

Stabilization Technique for Dust Suppression,” International Journal of Geo-Engineering, Vol. 3,

No. 2, pp. 27-37, June, 2011.

Bang, S., “Suction Anchors and Piles for Offshore Foundations,” Deep Foundations, pp. 72-74,

Mar./Apr. Issue, 2012.

Anderson, J., S. S. Bang, S. Bang, S. J. Lee, N. Y. Dho, S. R. Choi, and S-H. Ko, “Application of

Microbiological Calcite to Fiber Reinforced Soils to Reduce Wind Erosion Potential,”

International Journal of Geo-Engineering, Vol. 4, No. 2, pp. 47-54, June, 2012.

(3) Refereed Articles in Conference Proceedings

Shen, C. K., S. Bang, L. R. Herrmann, and K. M. Romstad, "A Reinforced Lateral Earth Support

System," Symposium on Reinforced Earth, American Society of Civil Engineers, Pittsburgh,

April 1978, pp. 764-793.

Shen, C. K., J. S. DeNatale, S. Bang, and J. F. Mitchell, "Field Performance of a Lateral Earth

Support System," 10th International Conference on Soil Mechanics and Foundation Engineering,

Stockholm, Sweden, 1981, pp. 243-246.

Bang, S., "Spiling Reinforcement System in Tunneling." 4th Australia-New Zealand Conference

on Geomechanics, Perth, Australia, May, 1984.

Bang, S., Y. S. Kim, and C. K. Shen, "Improvement of Oil Storage Tank Foundation by Fabric-

Mesh Reinforcement," International Conference on In-Situ Soil and Rock Reinforcement," Paris,

France, October 1984, pp. 355-359.

Bang, S., P. P. Kroetch, and C. K. Shen, "Analysis of Soil Nailing System, "International

Symposium on Earth Reinforcement Practice, Fukuoka, Japan, Nov., 1992, pp. 457-462.

Bang, S., "Movement - Dependent Lateral Earth Pressure Development Behind Retaining Walls

with Cohesive Backfill," Eighth International Conference of the Association for Computer

Methods and Advances in Geomechanics, Morgantown, WV, May, 1994

Bang, S., “ Design and Construction of Soil Nailing System,” Specialty Conference on Slope

Stability, Korean Society of Geotechnical Engineering, Seoul, Korea, Nov., 1994, pp. 1-23

(Invited).

Bang, S. and R. J. Taylor,” Anchor Mooring Line Configuration Analysis,” Fifth International

Offshore and Polar Engineering Conference, The Hague, The Netherlands, June, 1995, Vol. 2,

pp. 255-259.

Bang, S., “Experimental and Analytical Study of Expanded Polystyrene Blocks in Highway

Application,” Proceedings of International Seminar on the Application of EPS for Embankment

Construction, Seoul, Korea, Oct., 1995, pp. 105 - 133 (Invited).

Bang, S. and C. K. Shen, “Deep Seated Stability of Soil Nailing Walls,” International

Symposium on Earth Reinforcement Practice, Fukuoka, Japan, Nov., 1996, pp. 729-734.

Bang, S. and R. J. Taylor, “Analysis of Anchor Mooring Lines in Sand,” 7th International

Offshore and Polar Engineering Conference, Honolulu, Hawaii, May, 1997, Vol. 1, pp. 797-802.

Bang, S. and Y. I. Chung, “Analysis of Skew Soil Nailing Walls,” 9th International Conference

of the International Association for Computer Methods and Advances in Geomechanics, Wuhan,

China, Nov., 1997.

Bang, S. and H. Han, “Behavior of Buried Cables in Seafloor Soil Under Lateral Loading,” 8th

International Offshore and Polar Engineering Conference, Montreal, Canada, May, 1998, Vol. 2,

pp. 168-174.

Bang, S., T. Preber, and J. Thomason, “Laboratory Model Testing on Suction Piles and

Analytical Simulation of Installation,” 51st Canadian Geotechnical Conference, Edmonton,

Canada, Oct., 1998, Vol. 1, pp. 337-344.

Bang, S., R. J. Taylor, and H. Han, “Calibration of Centrifuge Model Tests on Mooring Lines,”

9th

International Offshore and Polar Engineering Conference, Brest, France, June, 1999, Vol. 1,

pp. 620-624.

Bang, S. and Y. Cho, “Analytical Performance Study of Suction Piles in Sand, 9th

International

Offshore and Polar Engineering Conference, Brest, France, June, 1999, Vol. 1, pp. 90-93.

Bang, S. and Y. Cho, “Analytical Performance Study of Suction Piles,” 18th

Offshore Mechanics

and Arctic Engineering Conference, in St. John’s Newfoundland, Canada, July, 1999.

Bang, S., Y. Cho, T. Preber, and J. Thomason, “Model Testing and Calibration Of Suction Pile

Installation in Sand,” 11th

Asian Regional Conference of the International Society for Soil

Mechanics and Geotechnical Engineering, Seoul, Korea, Aug., 1999, Vol. 1, pp. 253-256.

Bang, S., T. Preber, J. Thomason, and Y. Cho, “Laboratory Model Testing on Suction Piles in

Clay for Mooring of Mobile Offshore Bases,” 52nd

Canadian Geotechnical Conference, Regina,

Saskatchewan, Canada, Oct., 1999, pp. 119-126.

Bang, S., T. Preber, Y. Cho, J. Thomason, S. R. Karnoski, and R. J. Taylor, “Suction Piles for

Mooring of Mobile Offshore Bases,” Third International Workshop on Very Large Floating

Structures, Honolulu, Hawaii, Sept., 1999, Vol. 2, pp. 670-678.

Bang, S., “Anchor Mooring Line Analysis in Cohesive Seafloor, “Proceedings of the Korean

Geotechnical Society Spring 2000 National Conference, Seoul, Korea, Mar., 2000, pp. 58-76.

Bang, S., H. Han, and R. J. Taylor, “Development and Validation of Mooring Line Analysis in

Cohesive Seafloor,” 10th

International Offshore and Polar Engineering Conference, Seattle, WA,

May 2000, pp. 355-359.

Bang, S., Y. Cho, S. Karnoski, and R. J. Taylor, “Field Verification of Suction Pile Installation in

Sand,” International Symposium on Coastal Geotechnical Engineering in Practice, Yokohama,

Japan, Sept., 2000, Vol. 1, pp. 249-254.

Preber, T., S. Bang, Y. Cho, S. Boyle, and J. Gould, “Calibration of Suction Pile Installation

Analysis in Sand,” 53rd

Canadian Geotechnical Conference, Montreal, Canada, Oct., 2000, Vol.

2, pp. 901-908.

Bang, S., Y. Cho, and S. S. Kim, “Calibration of Suction Pile Installation Design with Centrifuge

Model Tests,” Paper No. OSU-5023, 20th

International Conference on Offshore Mechanics and

Arctic Engineering, Rio de Janeiro, Brazil, June 2001.

Bang, S. and Y. Cho, “Ultimate Horizontal Loading Capacity of Suction Piles,” 11th

International

Offshore and Polar Engineering Conference, Stavanger, Norway, June 2001, Vol. 2, pp. 552-559.

Bang, S. and W. Nyaz, “Simulation of Soil Nailing Facing Walls in Finite Element Analysis,”

2001 International Symposium on Earth Reinforcement, Fukuoka, Japan, Nov., 2001, Vol. 1, pp.

641-646.

Preber, T., S. Bang, S. Boyle, Y. Cho, J. Gould, and K. Park, "Laboratory Model Testing and

Calibration of Suction Pile Installation in Sand," International Conference for Ocean and

Offshore Structures, Singapore, Dec., 2001, pp. 91-98.

Cho, Y. and S. Bang, “Inclined Loading Capacity of Suction Piles,” 12th

International Offshore

and Polar Engineering Conference, Paper No. 2002-PCW-01, Kitakyushu, Japan, May, 2002.

Cho, Y., T. H. Lee, J. B. Park, D. J. Kwag, E. S. Chung, and S. Bang, “Field Tests on Suction

Pile Installation in Sand,” 21st International Conference on Offshore Mechanics and Arctic

Engineering, Paper No. 2002-28179, Oslo, Norway, June 2002.

Bang, S., R. Richardson, Y. Cho, and Y. S. Kim, “Calibration of Analytical Solution Using

Centrifuge Model Tests on Mooring Lines,” 13th

International Offshore and Polar Engineering

Conference, Paper No. 2003-JSC-122, Honolulu, Hawaii, May, 2003.

Cho, Y., T. H. Lee, E. S. Chung, and S. Bang, “Field Tests on Pull-out Capacity of Suction Piles

in Clay,” 22nd

International Conference on Offshore Mechanics and Arctic Engineering, Paper

No. 2003-37016, Cancun, Mexico, June 2003.

Bang, S., Y. Cho, Y. S. Kim, D. J. Kwag, and T. H. Lee, “Embedded Suction Anchors for

Floating Breakwater Foundations,” Coastal Engineering 2003, Cadiz, Spain, June, 2003, pp. 469-

477.

Bang, S. and Y. Cho, “Investigation on Suction Pile Retrieval,” International Conference on

Foundations, University of Dundee, Scotland, Sep., 2003, pp. 99-108.

Bang, S., K. Jones, and Y. Cho, “Transition of Soil Strength during Suction Pile Retrieval in

Sand,” 14th

International Offshore and Polar Engineering Conference, Paper No. 2004-JSC-152,

Toulon, France, May, 2004.

Bang, S. and Y. Cho, “Suction Pile Anchor System for Offshore Foundations,” 3rd

CECAR

International Conference, Seoul, Korea, Aug., 2004.

Bang, S., Y. Cho, and K. Jones, “Transition of Soil Strength During Suction Pile Retrieval,”

PORTS 2005, Barcelona, Spain, Apr., 2005.

Kim, Y. S., K. O. Kim, Y. Cho, S. Bang, and K. Jones, “Centrifuge Model Tests on Embedded

Suction Anchors,” 15th

International Offshore and Polar Engineering Conference, Paper No.

2005-JSC-123, Seoul, Korea, June, 2005.

Bang, S., Y. Cho, and D. Kwag, “Design and Installation of Suction Piles for Breakwater

Foundation,” OCEANS 2005 Marine Technology Society/IEEE Conference, Washington, DC,

Sep., 2005.

Burg, E. and S. Bang, “Analytical Parametric Study on Horizontal Loading Capacity of Suction

Piles,” OCEANS 2005 Marine Technology Society/IEEE Conference, Washington, DC, Sep.,

2005.

Bang, S., K. Jones, Y. S. Kim, K. O. Kim, and Y. Cho, “Vertical Pullout Capacity of Embedded

Suction Anchors in Sand,” 16th

International Offshore and Polar Engineering Conference, Paper

No. 2006-JSC-166, San Francisco, CA, May, 2006.

Bang, S., K. Jones, Y. S. Kim, K. O. Kim, and Y. Cho, “Horizontal Pullout Capacity of

Embedded Suction Anchors in Sand,” 25th


Arctic Engineering, Paper No. 2006-92006, Hamburg, Germany, June, 2006.

Burg, E. C., B. A. Frankl, L. M. Metz, and S. Bang, “Calibration of Mobilized Soil Strength

During Installation of Suction Piles,” 25th


Arctic Engineering, Paper No. 2006-92020, Hamburg, Germany, June, 2006.

Bang, S. and S. Karnoski, “Field Retrieval of Suction Piles in Sand,” 17th

International Offshore

and Polar Engineering Conference, Paper No. 2007-JSC-276, Lisbon, Portugal, July, 2007.

Bang, S., K. Jones, Y. S. Kim, and Y. Cho, “Horizontal Capacity of Embedded Suction Anchors

in Clay,” 26th

International Conference on Offshore Mechanics and Arctic Engineering, Paper

No. 2007-29115, San Diego, CA, June, 2007.

Sway, A. T. and S. Bang, “Analysis of Geofiber Reinforced Soils,” International Conference on

Soil Reinforcement IS Kyushu 07, Fukuoka, Japan, Nov., 2007, pp. 357 - 362.

Nielsen, N., B. Hauser, T. Preber, P. Sebaaly, D. Johnston, D. Huft, and S. Bang, “Full Depth

Reclamation on Existing Asphalt Pavement,” Proceedings of Eurasphalt & Eurobitume 4th

Congress, Copenhagen, Denmark, May, 2008.

Kwag, D. J., I. H. Cho, S. Bang, and Y. Cho, “Embedded Suction Anchors for Mooring of a

Floating Breakwater,” 27th

International Conference on Offshore Mechanics and Arctic

Engineering, Paper No. 2008-57055, Estoril, Portugal, June, 2008.

Cho, I. H., D. J. Kwag, S. Bang, and Y. Cho, “Use of Suction Piles for Temporary Mooring of

Immersed Tunnel Elements,” 18th

International Offshore and Polar Engineering Conference,

Paper No. 2008-JSC-127, Vancouver, Canada, July, 2008.

Bang, S. S., S. Bang, S. Frutiger, L. M. Nehl, and B. L. Comes, “Application of Novel Biological

Technique in Dust Suppression,” Transportation Research Board Annual Meeting, Paper No. 09-

0831, Washington, DC, Jan., 2009.

Kim, Y. S., K. O. Kim, Y. Cho, S. Bang, K. D. Jones, “Inclined Loading Capacity of Embedded

Suction Anchors in Clay, 28th


Engineering, Paper No. 2009-79035, Honolulu, HI, June, 2009.

Kim, K. O., Y. S. Kim, Y. Cho, S. Bang, and K. Jones, “Centrifuge Model Tests on Suction Piles

in Sand Under Inclined Loading,” 19th

International Offshore and Polar Engineering Conference,

Paper No. 2009-TPC-136, Osaka, Japan, June, 2009.

Lein, W., D. Johnston, B. Hauser, N. Nielsen, L. Roberts, D. Huft, P. Sebaaly, T. Preber, and S.

Bang, “Revised Performance of US Highway 18 Recycled Asphalt Concrete Base Material Test

Section,” Transportation Research Board Annual Meeting, Paper No. 10-3974, Washington, DC,

Jan., 2010.

Kim, Y., K. Kim, Y. Cho, and S. Bang, “Centrifuge Model Tests on Suction Pile Pullout Loading

capacity in Sand,” 7th

International Conference on Physical Modeling in Geotechnics (ICPMG

2010), Zurich, Switzerland, June, 2010.

Meyer, F. D., S. Bang, S. Min, L. D. Stetler, and S. S. Bang, “Microbially-Induced Soil

Stabilization: Application of Sporosarcina pasteurii for Fugitive Dust Control,” Proceedings of

the American Society of Civil Engineers’ Geo-Frontiers Meeting, Paper No. 1189, Dallas, TX,

March, 2011.

Kim, Y. S., Y. Cho, S. Bang, and K. D. Jones, “Pullout Capacity of Suction Piles in Clay under

Eccentric Vertical Loads,” 30th


Engineering, Paper No. 2011-49058, Rotterdam, The Netherlands, June, 2011.

Anderson, J., S. S. Bang, S. Bang, S. J. Lee, N. Y. Dho, S. R. Choi, S-H Ko, “Application of

Microbial Calcite to Fiber Reinforced Soils to Reduce Wind Erosion Potential,” Korean

Geotechnical Society Spring National Conference, Gyeonggi, Korea, March, 2012.

Kwag, D., Y. S. Choi, M. Oh, O. S. Kwon, and S. Bang, “Design and Installation of Small-Scale

Monopod Suction Pile and Tripod Suction Buckets for Offshore Wind Farms, ,” 22nd

International Offshore and Polar Engineering Conference, Paper No. 2012-TPC-156, Rhodes,

Greece, June, 2012

(4) Articles in Non-Refereed Conference Proceedings

Shen, C. K., Y. S. Kim, S. Bang, and J. F. Mitchell, "Centrifuge Modeling of a Lateral Earth

Support," American Society of Civil Engineers Fall Convention and Exposition, Centrifuge

Modeling of Geotechnical Problems, Atlanta, October 1979, pp 1-18.

Shen, C. K., Y. S. Kim, and S. Bang, "Oil Storage Tanks Foundation on Soft Clay," VIII

European Conference on Soil Mechanics and Foundation Engineering, Helsinki, Finland, May,

1983, pp. 371-374.

Bang, S. and H. T. Kim, "Lateral Earth Pressure Development from At-Rest to Active Behind

Retaining Walls," Second International Conference on Numerical Models in Geomechanics,

Ghent, Belgium, March 1986, pp. 417-422.

Bump, V. L. and S. Bang, "Investigation of Forest City Landslide in South Dakota," XVII Ohio

River Valley Soils Seminar, Clarksville, Indiana, October 1986, pp. 10.1-10.8.

Bang, S. and S. I. Hwang, "Analysis of Skew Reinforcement System" 24th Annual Engineering

Geology and Soils Engineering Symposium, Coeur d'Alene, Idaho, Mar., 1988, pp. 245-254.

Bang, S. and D. A. Erickson, "Analysis of In-Situ Soil Nailing," 25th Symposium in Engineering

Geology and Geotechnical Engineering, Reno, Nevada, March 1989, pp. 109-113.

Bang, S. and S. Schelske, "Bridge Abutments Reinforced with Skew Tie-Backs" 3rd

International Conference on Numerical Models in Geomechanics, Niagara Falls, Canada, May

1989, pp. 732-739.

Bang, S. and Y. I. Chung, "Performance Behavior of Soil Nailing System" 38th Annual

Geotechnical Engineering Conference, Minneapolis, Minnesota, Feb., 1990.

Bang, S. and J. D. Tucker, "Active Lateral Earth Pressure Behind Retaining Walls with

Interposed Backfill Soil Layer," 1990 Annual Symposium on Engineering Geology and

Geotechnical Engineering, Pocatello, Idaho, April, 1990, pp. 12-1 to 12-14.

Bang, S. and Z. Peng, "Analysis of Prefabricated Wick Drains by Uncoupled Finite Strain

Consolidation Theory," 27th Symposium on Engineering Geology and Geotechnical Engineering,

Logan, Utah, Apr., 1991.

Bang, S., Y. Yeon, and Y. I. Chung, "Effect of Retaining Wall Stiffness on Lateral Earth Pressure

Development," 28th Symposium on Engineering Geology and Geotechnical Engineering, Boise,

Idaho, April, 1992, pp. 287-298.

Bang, S., Y. Wei, and C. K. Shen, "Laterally Loaded Cast-In-Drilled-Hole Piles in Cohesive

Soils," 29th Symposium on Engineering Geology and Geotechnical Engineering, Reno, Nevada,

Mar., 1993, pp. 218 - 232.

Bang, S. and L. Shao, "Analysis of Unconfined Flow with Inclined Boundaries by a Finite

Difference Method," 1993 Canadian Society for Civil Engineering Annual Conference,

Fredericton, Canada, July, 1993, Vol. 4, pp. 119 - 128.

Gregory, G. H. and S. Bang, "Design of Flexible Pavement Subgrades with Geosynthetics," 30th

Symposium on Engineering Geology and Geotechnical Engineering, Boise, Idaho, Mar., 1994,

pp. 569 - 582.

Gregory, G. H. and S. Bang, "Effect of Geogrid Reinforcement on Seepage through Earth-fill

Dam Cores," 30th Symposium on Engineering Geology and Geotechnical Engineering, Boise,

Idaho, Mar., 1994, pp. 555 - 567.

Bang, S. and R. J. Taylor,” Static Mooring Line Configuration Analysis Tool,” 1994, Marine

Technology Society Convention, Washington, D. C., Sept., 1994; pp. 190-196.

Wung, C. C., R. W. Litton, H. M. Mitwally, S. Bang, and R. J. Taylor, “Effect of Soil on

Mooring System Dynamics,” Offshore Technology Conference Paper No. 7672, Houston, Texas,

May, 1995.

Bang, S., T. Preber, and Y. Cho, “Evaluation of Expanded Polystyrene Block Bridge Backfill by

Finite Element Method of Analysis,” 31st Symposium on Engineering Geology and Geotechnical

Engineering, Logan, Utah, Mar., 1995, pp. 96-102.

Preber, T. and S. Bang, “Field Application and Instrumentation of Expanded Polystyrene Blocks

as Bridge Backfill,” 31st Symposium on Engineering Geology and Geotechnical Engineering,

Logan, Utah, Mar., 1995, pp. 84-95.

Schaefer, V. R., S. Bang, and V. L. Bump, “Investigation of Settlement of a Multiplate Long-

Span Metal Culvert,” 45th Annual Geotechnical Engineering Conference, Minneapolis, MN,

Feb., 1997.

Bang, S. and J. H. Park, “Approximate Finite Element Solutions of Earth Reinforcement

Systems,” 32nd Symposium on Engineering Geology and Geotechnical Engineering, Boise,

Idaho, Mar., 1997, pp. 421-434.

Bang, S. and Y. Cho, “Analytical Performance Study of Suction Piles in Clay,” 34th

Symposium

on Engineering Geology and Geotechnical Engineering, Logan, Utah, Apr., 1999, pp. 232-244.

Swe, T., G. Gregory, and S. Bang, “Constitutive Relationship of Geofiber Reinforced soils,” 35th

Symposium on Engineering Geology and Geotechnical Engineering, Pocatello, ID, Mar., 2000.

Bang, S., T. Preber, J. Thomason, and Y. Cho, “Suction Pile Installation Analysis,” World

Congress of Korean Scientists and Engineers, Seoul, Korea, July, 1999.

Bang, S. and Y. Cho, “Mooring of Mobile Offshore Bases: Vertical Loading Capacity of Suction

Piles,” UKC 2000 Conference, Chicago, IL, Sep., 2000.

Bang, S. and Y. Cho., “Ultimate Vertical Loading Capacity of Suction Piles,” 36th

Annual

Symposium on Engineering Geology and Geotechnical Engineering, Las Vegas, NV, Mar., 2001,

pp. 703-712.

Bang, S. and Y. S. Kim, “Centrifuge Model Tests on Chain Mooring Lines in Sand,” UKC 2002

Conference, Seoul, Korea, July, 2002.

Bang, S., Y. Cho, and Y. S. Kim, “Centrifuge Model Tests on Mooring Lines in Sand,” 38th

Annual Symposium on Engineering Geology and Geotechnical Engineering, Reno, NV, Mar.,

2003.

Bang, S., Y. Cho, D. J. Kwag, and O. S. Kwon, “Suction Piles for Breakwater Foundation,” UKC

2007 Conference, Reston, VA, Aug., 2007.

Bang, S., K. Jones, Y. S. Kim, K. O. Kim, and Y. Cho, “Vertical Pullout Capacity of Embedded

Suction Anchors in Clay,” UKC 2008 Conference, Paper No. CEE-1.6, San Diego, CA, Aug.,

2008.

Bang, S. S., C. Leibrock, B. Smith, R. J. Pinckelman, S. Frutiger, L. M. Nehl, B. L. Comes,.D. Coleman, and S. Bang, “Geotechnical Values of Microbial Calcite in Dust Suppression,” National Science Foundation Engineering Research and Innovation Conference, Honolulu, HI, 2009.

Bang, S., K. D. Jones, Y. Cho, Y. Kim, and K. O. Kim, “Use of Suction Piles and Suction

Anchors for Off-shore Structures in Korea,” UKC Conference, Raleigh, NC, July, 2009.

Bang, S. S., S. Bang, J. Anderson, S. J. Lee, N. Y. Dho, S. R. Choi, and S. Ko, “Application of

Microbial Calcite to Hemp Fiber Reinforced Soils to Combat Desertification,” 11th

International

Symposium on New Technologies for Urban Safety of Mega Cities in Asia,” Ulaanbaatar,

Mongolia, Oct., 2012.

(5) Technical Reports

Shen, C. K., L. R. Herrmann, K. M Romstad, S. Bang, Y. S. Kim, and J. S. DeNatale, "An In-

Situ Earth Reinforcement Lateral Earth Support System," University of California, Davis, Report

No. 81-03, Report prepared for National Science Foundation, March 1981.

Bang, S. and C. K. Shen, "Soil Reinforcement in Soft Ground Tunneling," Final Report prepared

for U. S. Department of Transportation, January 1983.

Shen, C. K. and S. Bang, "Lateral Resistance of Cast-in-Drilled-Hole Piles in Sloping Ground,"

Report prepared for California Department of Transportation, In Press.

Bang, S., "Design and Analysis of Reinforcing Distressed Bridge Abutments," Vol. I and Vol. II,

Final report prepared for South Dakota Department of Transportation, Oct., 1988.

Bang, S. and D. Wu, "Investigation of Bulkhead Bridge Abutments," Vol. I, II, and III, Final

Report prepared for South Dakota Department of Transportation, Aug., 1990.

Bang, S. and H. I. Yeon, "Analytical Parametric Study of a Tied-Back System for Reinforcing

Distressed Bridge Abutments," Vol. I, II, and III, Final Report prepared for South Dakota

Department of Transportation, Dec., 1990.

Bang, S., G. Gregory, and M. Doanne, "SHRP Material Testing," Final Report prepared for

South Dakota Department of Transportation, June, 1993.

Bang, S., "Thin Blade Plow Resistance," Report prepared for Naval Civil Engineering

Laboratory, Sept., 1993.

Bang, S., “Anchor Mooring Line Computer Program,” Final Report prepared for Naval Facilities

Engineering Command, Sept., 1994.

Bang, S., “Laboratory Determination of Haydite Material Properties,” Final Report prepared for

South Dakota Department of Transportation, Dec., 1994.

Preber, T. and S. Bang, “Field Demonstration of the Use of Expanded Polystyrene as Bridge

Abutment Backfill,” Report prepared for Wyoming Department of Transportation, Dec., 1994.

Bang, S., “Oval Otter Board Penetration Depth,” Report prepared for Naval Facilities

Engineering Service Center, Mar., 1995.

Bang, S., “Rectangular Otter Board Penetration Depth,” Report prepared for Naval Facilities

Engineering Service Center, Apr., 1995.

Bang, S., “Otter Board Hardware Penetration Depth,” Report prepared for Naval Facilities

Engineering Service Center, May, 1995.

Bang, S., “Performance Evaluation of Bridge Abutments With Tie-Backs,” Final report prepared

for South Dakota Department of Transportation, May, 1996.

Bang, S., “Analysis of Buried Cables in Seafloor,” Report prepared for Naval Facilities


Bang, S., “Analysis of Buried Cables in Nonlinear Seafloor Soil,” Report prepared for Naval

Facilities Engineering Service Center, Apr., 1996.

Bang, S., “Anchor Mooring Line Computer Program Users Manual,” Report No. CR-6020-OCN,

Naval Facilities Engineering Service Center, June, 1996.

Bang, S. and G. Smith, “Use of Suction Piles for Mooring of Mobile Offshore Bases - Task 1

Completion Report: Literature Review,” Report prepared for Naval Facilities Engineering

Service Center, May, 1998.

Bang, S. and Y. Cho, “Use of Suction Piles for Mooring of Mobile Offshore Bases – Task 2

Completion Report: Analytical Performance Study,” Report Prepared for Naval Facilities


Bang, S. and Y. Cho, “Use of Suction Piles for Mooring of Mobile Offshore Bases – Task 3

Completion Report: Analysis and Design Methods of Suction Piles,” Report prepared for Naval

Facilities Engineering Service Center, Dec., 2000.

Bang, S., T. Preber, Y. Cho, J. Thomason, B. Gisi, D. Hodges, S. Boyle, J. Gould, and K. Park,

“Use of Suction Piles for Mooring of Mobile Offshore Bases – Task 4 Completion Report:

Experimental Laboratory and Field Model Tests,” Report prepared for Naval Facilities

Engineering Service Center, Oct., 2000.

Bang, S. and H. Han, “Use of Suction Piles for Mooring of Mobile Offshore Bases – Task 5

Completion Report: Mooring Line Analysis and Calibration Against Model Test Results,” Report

prepared for Naval Facilities Engineering Service Center, Aug., 2000.

Bang, S., Y. Cho, and Daewoo Institute of Construction Technology, “Use of Suction Piles for

Mooring of Mobile Offshore Bases - Task 6 Completion Report: Centrifuge Model Tests,”

Report prepared for Naval Facilities Engineering Service Center, June, 2001.

Bang, S., "Use of Suction Piles for Mooring of Mobile Offshore Bases," Final Report prepared

for Office of Naval Research, Sep., 2001.

Bang, S., “Suction Pile Retrieval,” Final Report prepared for National Science Foundation, May,

2003.

Bang, S., “Affect of Point of Loading on Lateral Resistance of Rigid Piles,” Final Report

prepared for National Science Foundation, May, 2005.

Nielsen, N., B. Hauser, T. Preber, P. Sebaaly, D. Johnston, D. Huft, and S. Bang, “Quality Base

Material Produced Using Full Depth Reclamation on Existing Asphalt Pavement Structure - Task

1 Completion Report: Literature Review,” Report prepared for Federal Highway Administration,

May, 2007.

Nielsen, N., B. Hauser, T. Preber, P. Sebaaly, D. Johnston, D. Huft, S. Bang, and L. Roberts,


Structure - Task 2 Completion Report: State Specifications and Construction Experiences,”

Report prepared for Federal Highway Administration, June, 2007.

deStigter, M., W. Lein, L. Roberts, D. Johnston, D. Huft, P. Sebaaly, and S. Bang, “Quality Base

Material Produced Using Full Depth Reclamation on Existing Asphalt Pavement Structure -

Tasks 6 and 7 Completion report: Field Procedures to Produce Base Material Meeting Asphalt

Content and Gradation Specifications; and Basic Construction Details for Field Test Strip,”

Report prepared for Federal Highway Administration, Nov., 2009.

Bang, S. S., S. Bang, and F. D. Meyer, “Development of Geo-Biological Dust Control Technique

for Construction Sites,” Final report submitted to Samsung Construction and Trade, KOREA,

Oct., 2010.

Bang, S., W. Lein, B. Comes, L. Nehl, J. Anderson, P. Kraft, M. deStigter, C. Leibrock, L.

Roberts, P. Sebaaly, D. Johnston, and D. Huft,, “Quality Base Material Produced Using Full

Depth Reclamation on Existing Asphalt Pavement Structure - Task 4 Completion Report:

Development of FDR Mix Design Guide,” Report prepared for Federal Highway Administration,

Dec., 2011.

Bang, S., W. Lien, N. Nielsen, B. Hauser, T. Preber, L. Roberts, P. Sebaaly, D. Johnston, and D.

Huft, “Quality Base Material Produced Using Full Depth Reclamation on Existing Asphalt

Pavement Structure -Task 3 Completion Report: Performance Study of U.S. Highway 18,”

Report prepared for Federal Highway Administration, May, 2012.

Bang, S. S. and S. Bang, “Application of Microbial Calcite to Fiber Reinforced Soils,” Year One

report submitted to Lotte E&C, KOREA, June, 2012.

Bang, S., P. Kraft, C. Leibrock, W. Lein, L. Roberts, P. Sebaaly, D. Johnston, and D. Huft,


Structure - Task 5 Completion Report: Development of Standardized Laboratory Testing

Method,” Report prepared for Federal Highway Administration, July, 2012.

Bang, S., J. Anderson, W. Lein, M. deStigter, C. Leibrock, L. Roberts, D. Johnston, and D. Huft,,


Structure - Task 8 Completion Report: Performance Study of U.S. Highway 73,” Report prepared

for Federal Highway Administration, July, 2012.

Bang, S., W. Lein, P. Sebaaly, L. Roberts, and D. Huft,, “Quality Base Material Produced Using

Full Depth Reclamation on Existing Asphalt Pavement Structure - Task 9 Completion Report:

Establishment of Laboratory Testing and Design Procedures,” Report prepared for Federal

Highway Administration, July, 2012.

Bang, S., J. Anderson, W. Lein, M. deStigter, C. Leibrock, L. Roberts, N. Nielson, B. Hauser, P.

Kraft, B. Comes, L. Nehl, T. Preber, P. Sebaaly, D. Johnston, and D. Huft,, “Quality Base

Material Produced Using Full Depth Reclamation on Existing Asphalt Pavement Structure - Task

11 Final Report,” Report prepared for Federal Highway Administration, July, 2012.

(6) Minor Articles

Shen, C. K., S. Bang, and L. R. Herrmann, "Ground Movement Analysis of Earth Support

System," Closure, American Society of Civil Engineers, Vol. 109, GT 3, March 1983, pp. 488.

Shen, C. K., S. Bang, K. M. Romstad, L. Kulchin, and J. S. DeNatale, "Field Measurements of an

Earth Support System," Closure, American Society of Civil Engineers, Vol. 109, GT3, March

1983, pp. 490.

Presentations

Indiana Professional Engineers Annual Meeting, "Earth Reinforcement," South Bend, IN.,

September 1981.

Korean Scientists and Engineers Association, "Failure in Geotechnical Structures," West

Lafayette, IN., September 1983

14th Annual Southwest Geotechnical Engineers Conference, "Soil Nailing System Design &

Performance Behavior," Sparks, NV, April 1989.

First Annual EPSCoR Conference, "Characterization of Soil Failure Criterion for Limiting

Equilibrium Method of Analysis," Pierre, SD, May, 1990.

Second Annual EPSCoR Conference, "Characterization of Soil Failure Criterion for Limiting

Equilibrium Method of Analysis," Brookings, SD, Aug. 1991.

Third Annual EPSCoR Conference, "Characterization of Soil Failure Criterion for Limiting

Equilibrium Method of Analysis," Vermillion, SD, Aug. 1992.

1994 Marine Technology Society Convention, ”Effect of Soil on Mooring System Dynamics,”

Washington, DC, Sept., 1994.

Mobile Offshore Base Technology Review Conference, “Suction Piles,” Arlington, VA, Apr.,

1977.

Invited Lecture, “Soil Nailing System,” L G Construction Co., Ltd., Seoul Korea, June, 1997.

Invited Lecture, “Design and Analysis of Underwater Anchors,” Korean Society of Civil

Engineers, Busan Section, Busan, Korea, June, 1997.

First Global Conference of Korean Transportation Scientists and Engineers,” Applications of

Geotechnical Engineering in Transportation: Examples in 21st Century,” A Keynote Address,

Salt Lake City, UT, July, 1997.

Mobile Offshore Base Technology Review Conference, “Use of Suction Piles for Mooring of

Mobile Offshore Bases,” Arlington, VA, Oct., 1997.


Mobile Offshore Bases,” Arlington, VA, Apr., 1998.


Mobile Offshore Bases,” Arlington, VA. Oct., 1998.


Mobile Offshore Bases,” Arlington, VA. Mar., 1999.

Keynote Lecture, “Anchor-Mooring Line Analysis in Cohesive Seafloor,” Korean Geotechnical

Society Spring 2000 National Conference, Seoul, Korea, Mar., 2000.

Invited Lecture, “Suction Piles,” US Navy Annual Ocean Facilities Program Conference,

Annapolis, MD, Apr., 2000.

Invited Lecture, “Suction Piles for Foundations of Off-Shore Structures,” Specialty Seminar,

Daewoo Engineering and Construction Co., Seoul, Korea, Mar., 2001.

Invited Lecture, “Use of Suction Piles for Offshore Structure Foundations,” Korean Navy

Facilities Engineering Command HQ, Apr., 2004.

Invited Lecture, “Suction Pile Anchor System,” Korean Geotechnical Society Foundations

Division Annual Spring Conference, Seoul, Korea, June, 2004.

Transportation Research Board Annual Meeting, "Quality Base Material Produced Using Full

Depth Reclamation on Existing Asphalt Pavement Structure,” AFD70 Committee on Asphalt

Rehabilitation, Washington, DC, Jan. 2007.

Transportation Research Board Annual Meeting, "Quality Base Material Produced Using Full

Depth Reclamation on Existing Asphalt Pavement Structure - Update,” AFD70 Committee on

Asphalt Rehabilitation, Washington, DC, Jan. 2008.

Asphalt Recycling and Reclaiming Association Annual Meeting and Convention, "FHWA Full

Depth Reclamation Research Project,” Los Cabos, Mexico, Feb. 2008.

Keynote Presentation, Super Pile 2009 Conference, Deep Foundations Institute, “Suction Piles

and Anchors for Offshore Structures,” Burlingame, CA, June, 2009.


Depth Reclamation Research Project,” Tucson, AZ, Feb. 2011.

Award Keynote Presentation, “Application of Microbiologically Induced Soil Stabilization

Technique for Dust Suppression,” Korean Geotechnical Society Annual Conference, Seoul,

Korea, Mar., 2011.

Invited Presentation, Deep Foundations Institute Marine Foundations Specialty Seminar,

“Application of Suction Piles and Suction Anchors for Offshore Structures,” San Francisco,

June, 2011.

United Nations Conference to Combat Desertification, “Prevention of Desertification Using

Microbially Induced Carbonate Precipitation,” Changwon, Korea,Oct., 2011.

South Dakota Engineering Society Meeting, “Application of Microbial Calcite to Fiber

Reinforced Soils,” Rapid City, SD, Oct., 2011.


Depth Reclamation Research Project,” Bonita Springs, FL, Feb. 2012.

Invited Presentation, Western States Regional In-Place Recycling Conference, “Advancements in

Full Depth Reclamation – Design and Construction Considerations, Ontario, CA, Sep., 2012.

BIOGRAPHY Sangchul Bang 10/2012€¦ · Administrative Experience Chairman, Materials Engineering...

Documents

Transcript of BIOGRAPHY Sangchul Bang 10/2012€¦ · Administrative Experience Chairman, Materials Engineering...