Benefits Features - PaR
2
Benefits • Auto Centering - CRANE VISION™ automacally centers the bridge and trolley over the load during this hoisng. This facilitates safety centered hoisng makes centering the load before a pick easier for the operator. • Side Load Detecon - CRANE VISION™ prevents the crane from hoisng if the load is not centered under the hook. This prevents the load from shiſting or swinging when it’s picked up off the ground. • Snag Detecon - CRANE VISION™ can prevent adverse load moon under most snagging condions. When a snag condion is detected the system issues a stop command to the motors. Features • Proven - CRANE VISION™ technology has a proven industrial track record with applicaons on heavy equipment producon cranes, primary metals coil cranes, and general purpose single & double girder bridge cranes. • Compable - CRANE VISION™ is compable with exisng VFDs. Enabling & disabling CRANE VISION™ can be accomplished with exisng wired or radio pendants. • Modular - CRANE VISION™ can be used in conjuncon with PaR’s other crane control technology: EXPERT OPERATOR™ , SAFE MOVE™ and AUTO MOVE™. Contact PaR Systems Telephone: +1.651.484.7261 Toll Free: +1.800.464.1320 Email: [email protected] www.par.com PaR Systems, Inc. 707 County Road E West Shoreview, Minnesota 55126-7007 USA
Transcript of Benefits Features - PaR
Benefits
• Auto Centering - CRANEVISION™ automatically centers the bridge and trolley over the load during this hoisting. This facilitates safety centered hoisting makes centering the load before a pick easier for the operator.
• Side Load Detection - CRANEVISION™ prevents the crane from hoisting if the load is not centered under the hook. This prevents the load from shifting or swinging when it’s picked up off the ground.
• Snag Detection - CRANEVISION™ can prevent adverse load motion under most snagging conditions. When a snag condition is detected the system issues a stop command to the motors.
Features
• Proven - CRANEVISION™ technology has a proven industrial track record with applications on heavy equipment production cranes, primary metals coil cranes, and general purpose single & double girder bridge cranes.
• Compatible - CRANEVISION™ is compatible with existing VFDs. Enabling & disabling CRANEVISION™ can be accomplished with existing wired or radio pendants.
• Modular - CRANEVISION™ can be used in conjunction with PaR’s other crane control technology: EXPERTOPERATOR™, SAFEMOVE™ and AUTOMOVE™.
Contact PaR Systems Telephone: +1.651.484.7261 Toll Free: +1.800.464.1320 Email: [email protected] www.par.com
PaR Systems, Inc. 707 County Road E West Shoreview, Minnesota 55126-7007 USA
Principle of Operation Sensory information about hook position is obtained by using an industrial machine-vision camera, together with robust hook tracking software. The camera is mounted on the trolley, near the cable drum, and is oriented downward. In this configuration, the hook is always visible to the camera. The camera captures and analyzes images of the hook position and issues this information to the CRANEVISION™ controller. With CRANEVISION™ the crane is made safer and smarter. Dangerous conditions, like off center hoists and snags, can be detected and appropriate action taken to avoid accidents. Logic control allows for configurable response to these conditions.
CRANEVISION™ Crane Controls
PaR Systems’ CRANEVISION™ is the combination of advanced motion control and machine vision technologies. Vision-based crane manipulation helps the operator avoid side pull and snag conditions for safer crane operations.
CRANEVISION™ Sideload & Snag Detection TechnologyEXPERTOPERATOR™
PendantRadio
Pendant Panel
EXPERTOPERATOR™
