APPLICATIONS FEATURES & BENEFITS

2
F5147 REV E www.davco.com DAVCO Technology, LLC 800-328-2611 Technology, LLC ® 1600 Woodland Drive, Saline, MI 48176-1629 Supply or Waste Oil Tank Hydraulic Reservoir Anti-Freeze Surge Tank Meter Pump Control APPLICATIONS Single pole, double throw switch electrical circuit Compatible with alternating and direct current to 240 volts Approved for Class I, Groups C & D hazardous locations Compatible with many liquids including lube oil, coolant and antifreeze Four ½" NPT ports for connection in vertical or horizontal mounting FEATURES & BENEFITS One model provides high or low level fluid sensing using VAC or VDC voltage MODELS & OPTIONS

Transcript of APPLICATIONS FEATURES & BENEFITS

Page 1: APPLICATIONS FEATURES & BENEFITS

F5147 REV E

www.davco.comDAVCO Technology, LLC

800-328-2611

T e c h n o l o g y , L L C®

1600 Woodland Drive, Saline, MI 48176-1629

• Supply or Waste Oil Tank• Hydraulic Reservoir• Anti-Freeze Surge Tank• Meter Pump Control

APPLICATIONS• Single pole, double throw switch electrical

circuit• Compatible with alternating and direct

current to 240 volts• Approved for Class I, Groups C & D

hazardous locations• Compatible with many liquids including

lube oil, coolant and antifreeze• Four ½" NPT ports for connection in

vertical or horizontal mounting

FEATURES & BENEFITS

• One model provides high or low level fluid sensing using VAC or VDC voltage

MODELS & OPTIONS

Page 2: APPLICATIONS FEATURES & BENEFITS

F5147 REV EDAVCO®, Fuel Pro®, Diesel Pro®, Industrial Pro®, EyeMax®, Sea Pro®, Shop Pro®, Pro-Chek® and “SEEING IS BELIEVING”® are registered trademarks of DAVCO Technology, LLC. As technical advancements continue, specifications may change without notice.An ISO/TS 16949 and ISO 14001 Environmentally Registered Company

050619© DAVCO Technology, LLC. 2019

Use Liquid Level Switch on Supply or Waste Oil Tank Hydraulic Reservoir, Anti-Freeze Surge Tank or Meter Pump Control.

Call customer service at 800-328-2611 for your nearest distributor.

TO ORDER

FLUIDPORTFLOAT

ELECTRICALCONTACTS

SWITCH• The Liquid Level Switch is installed in piping systems where a high fluid level, low fluid level or empty line needs to trigger a signal or to activate another component or system.

• The electrical connections are set to be normally open, but can be switched to normally closed. The sealed switch contacts are capable of switching up to 240 volts, AC or DC, and 3 amps in a circuit wired to a warning light, buzzer, electromechanical valve or shutdown circuit.

• An internal float, that contains a magnet, allows the switch contacts to remain open when the Liquid Level Switch is empty and holds the switch contacts closed when the unit is full of fluid.

TYPICAL INSTALLATIONS

HIGH LEVEL ELBOW INSTALLATION

LOW LEVEL SWITCH INSTALLED IN A VERTICAL LINE

CONNECT TO LIGHT, SIREN OR PLC

CONNECT TO LIGHT, SIREN OR PLC

CONNECT TO ELECTROMECHANICAL VALVE

CONNECT TO EQUIPMENT SHUT-DOWN CIRCUIT

DETECT AND EMPTY LINEHORIZONTAL LINE INSTALLATION

DETECT AND EMPTY LINEHORIZONTAL LINE INSTALLATION

PRIMARY RESERVOIR

RESERVOIRTANK

UNIVERSAL APPLICATIONS

HOW IT WORKS

®

®

[email protected] www.davco.com