BACnet integration module

of 4/4
BACnet integration module allows combining devices for lighting, life support, access control, and electrical supply www.axxonsoft.com About BACnet BACnet is a multipurpose protocol supported by various equipment including ACS/FAS systems as well as industrial automation systems, smart buildings control systems, lighting systems, life support, power supply systems, elevators control systems and other building manage- ment systems. There is no need to use any other software wrapper while using BACnet Wrapper module – whereas for OPC Wrapper OPC Server is needed. Each device has the number of channels and parameters that can be available both for reading only and for reading-recording. BACnet Wrap- per integration module allows you to get parameter values and change BACnet integration module them. BACnet device is monitored and controlled by getting and chang- ing parameter values. The device manufacturer provides the document that says what pa- rameters the device has, what values these parameters can have and what result can be obtained by changing the parameter values. The re- quired parameters are chosen when configuring the integration mod- ule and corresponding objects are created and configured in Intellect. The values of variable parameters can be set using objects on the map or using macros and scripts. Parameter display can also be configured on the map.
  • date post

    11-Feb-2017
  • Category

    Documents

  • view

    237
  • download

    1

Embed Size (px)

Transcript of BACnet integration module

  • BACnet integration moduleallows combining devices for lighting, life support, access control, and electrical supplywww.axxonsoft.com

    About BACnetBACnet is a multipurpose protocol supported by various equipment including ACS/FAS systems as well as industrial automation systems, smart buildings control systems, lighting systems, life support, power supply systems, elevators control systems and other building manage-ment systems. There is no need to use any other software wrapper while using BACnet Wrapper module whereas for OPC Wrapper OPC Server is needed.

    Each device has the number of channels and parameters that can be available both for reading only and for reading-recording. BACnet Wrap-per integration module allows you to get parameter values and change

    BACnet integration module

    them. BACnet device is monitored and controlled by getting and chang-ing parameter values.

    The device manufacturer provides the document that says what pa-rameters the device has, what values these parameters can have and what result can be obtained by changing the parameter values. The re-quired parameters are chosen when configuring the integration mod-ule and corresponding objects are created and configured in Intellect. The values of variable parameters can be set using objects on the map or using macros and scripts. Parameter display can also be configured on the map.

    http://www.axxonsoft.com/

  • BACnet integration moduleallows combining devices for lighting, life support, access control, and electrical supplywww.axxonsoft.com

    Automated building control systems BACnet Wrapper integration module can be used to connect Intellect to automated building control systems.

    Such systems perform the following:

    HVAC integrated control as well as water supply and drain system management, power supply and lighting control.

    Integration with various devices as well as Inter-net and Intranet data sources enabling intelli-gent control over key information collected from the site.

    Connection of such system to Intellect using the BACnet protocol enables displaying the power sta-tus (on/off), general system failures and fire alarms on the map or in the event logs, i.e. one can monitor the system the same way as in other ACFA-Intellect integrations without installing these systems.

    Temperature and humidity control

    Refrigeratingappliances

    HVAC Access control systems

    Lighting systems Elevator control systems

    Passive fire protection

    Consolidated integrated security systems powered by AxxonSoft software

    CONTROL SYSTEMS

    COMPLIANT DEVICES

    AND OTHERS

    http://www.axxonsoft.com/

  • www.axxonsoft.com

    BACnet integration moduleallows combining devices for lighting, life support, access control, and electrical supply

    HVAC systemsBACnet integration module allows connecting Intellect to various HVAC (heating, ventilating and air conditioning) systems, moni-toring their state and controlling components of these systems.

    Temperature and humidity control Temperature control is required in shop premises. Connection of HVAC equipment to Intellect using the BACnet protocol al-lows getting data (temperature, humidity) from sensors con-nected to the controller in a real time mode, as well as manag-ing the connected equipment in order to control temperature.

    Passive fire protection Passive fire protection equipment used in HVAC systems is rep-resented by fire dampers that prevent the spread of fire inside the ductwork through fire-resistance rated walls and floors.

    BACnet integration module allows reading and controlling cur-rent position of such dampers (actuators) connected to Intel-lect using the BACnet protocol, i.e. the operator can control the spread of fire on the map opening and closing the dampers.

    The manufacturer embeds micro code into the device this micro code automatically controls the device (close and open a fire damper according to its own internal logic). BACnet inte-gration module allows managing such micro code. Operator commands are considered to be with higher priority than mi-cro code commands, i.e. if the operator sees that micro code is not efficient, he can control the system manually - for example, direct the fire to the required area (with no people in it).

    Lighting systemsBACnet is also used for the control of lighting systems. Micro code embedded in BACnet devices enable automatic control over light sources (turn them on/off) in order to provide suffi-cient light and save electric power depending on the natural daylight and the presence of people on the premises. Such system is perfect for office buildings, conference rooms, class-rooms, sports and other halls as well as for industrial premises.

    When connecting the notification system to Intellect using the BACnet protocol the operator can control the state of light sources on the map and manage them if necessary. When using such control system along with light sensors it is possible to move automation logic to Intellect side: manage light sources using macros and scripts.

    http://www.axxonsoft.com/

  • www.axxonsoft.com

    BACnet integration moduleallows combining devices for lighting, life support, access control, and electrical supply

    Elevator control systemsElevator control systems are the part of automated building con-trol systems that help to improve the performance of such systems. These systems enable programmable automatic elevator operation.

    When connecting the elevator control system to Intellect using the BACnet protocol the operator can control the location and state of elevators on the map and manage them if necessary (moving them from one floor to another, opening and closing the doors, etc.).

    Access control systemsBACnet integration module allows connecting ACS systems to Intellect without any other integration. Connection of ACS using BACnet protocol enables monitoring and control of such system. In particular, if the protocol implementation provides such fea-tures, then Intellect can be configured allowing the operator to open and close the door using the card, i.e. perform the same actions as in standard ACS integration.

    Refrigerating appliancesBACnet is used in refrigerating engineering that is why BACnet integration module can be used to monitor and control such ap-pliances. In particular, the use of this integration module allows not only reading and displaying current temperatures in Intellect interfaces, but also auto notifying the operator about refrigerat-ing equipment failures, non-closed doors and many other cases. Using standard features of Intellect PSIM one can configure SMS/e-mail/voice notification.

    Industrial automation systemsBACnet integration module is used in industrial automation systems (especially at the field scale of these systems) various sensors includ-ing temperature, humidity, emergency, oil pressure, fan control and many other sensors.

    Connection of various types of sensors using the BACnet protocol al-lows operator to monitor sensor readings on the map and in the event log. This will also allow one to automatically perform various actions in the system depending on such readings using standard features of Intellect macros and scripts.

    http://www.axxonsoft.com/