8/2/2019 Axial Flow Fan Selection

1/8

Axial Flow Fan And

Centrifugal Fan

F a n s f o r t h e L o n g R u n !

A REGAL-BELOIT COMPANY

8/2/2019 Axial Flow Fan Selection

2/8

configuration. Fan selection chart (full

solidity in 12" to 60", Full/ ha lf solidity

in 75") and general arrangement

dimensions are given in Table -1 & 2

respectively. Following special

application fans are also offered

depending on application and end

use.

Bifurcated Fans :

1

MARATHON Electric the Pioneer and

a c k n o w l e d g e d l e a d e r i n A i r

Technology offers a w ide ra nge o f

AXIAL Flow a nd Centr ifuga l Fa ns

suitable for Industrial ventilation, Air

Conditioning, Dust extraction and

Fume extraction systems.

Custom built fans catering to the specificrequirement of Steel Plant, Fertilizer

Plant, Tea Industry, Mine, Ship, Power

Plants (Thermal and Nuclear) Chemical

Plant etc. are also available.

AXIAL FLOW FAN

Features

Axial Flow Fans are available in wide

range of combination from 12" to 75"

diameter fitted with Motors from 0.37

kW to 110 kW in 2 Pole, 4 Pole, 6

versions. Motors are suitable for 415

volts 10%, 50 Hz 5%, 3 Phase Power

Supply, as per IS:325 / 19 96 , which

are in-house manufactured ensuring

better fitment and proper matching.

Fans are available in single phase

version also.

Duct mounted Fan

Axial Flow Fans are capable of

handling upto 300 000 m3/ hr airdelivery and static pressure upto 120

MM WG. Further pressure can be

developed with multiple staging of fans.

Construction

Fan Casing is made of heavy gauge

MS Sheet (as per IS-107 9/ 20 62)

having robust construction. It has

flanges at both ends for easy fixing

on ducts/ walls.

Impeller is made of Die Cast aluminium

(LM-6 of BS 1490 / IS 617 Gr. 46 00 )

having aerofoil design with adjustable

pitch angles. The solidity (No. of wings)

is varied in order to use the most

efficient part of the fan characteristics.

Wall Mounted

Fan

Axial Flow Fans are tested in

accordance with IS-3588-1991.

Standard fans are finished with synthetic

enamel paint.

Depending on application, fans can

be supplied with casing made of

stainless steel or zinc spra yed MS

sheet. Epoxy / chlorinated rubber paint

may also be provided.

Fans are available both in Wall

M o u n t e d a n d Duc t Mounted

MARATHON Electric Flame Proof Axial

Fans are available from sizes 15" to

75" and are used extensively in Fire

Hazard Areas.

Roof Extractor Unit :

MARATHON Electric Roof Extra ctorUnits are available from sizes 19" to

60", fitted with Hood and Bottom Plate.

These units are used on the roof to

extract and exhaust contaminated air.

Belt Driven Fan :

MARATHON Electric Belt Driven Fans

are available from sizes 19" to 75".

Fans are driven by belt and pulley

arrangement. The motor is located

outside the air stream.

Accessories :

Following (optional) accessories are

also available.

s Louvre Shutter

s Wall Cowl and Bird Screen

s Filter / Filter Frame with a da pter

cone

s Dampers

MARATHON Electric Bifurca ted Fans

are available from sizes 19" to 75".

These fans are used to handle

hazardous air, where motors are kept

outside the air stream.

Flame Proof Fans :

8/2/2019 Axial Flow Fan Selection

3/82

FAN MODEL MOTOR RATING L L1 A B C D E F G K M N P

12K/ K37-P2 0.37 kW 2 POLE

12K/ K55-P2 0.55 kW 2 POLE

15J/ K37-P4 0.37 kW 4 POLE

15J/ K55-P2 0.55 kW 2 POLE

15J/ K75-P2 0.75 kW 2 POLE15J/ 1 K1-P2 1.1 kW 2 POLE

15J/ 1K5-P2 1.5 kW 2 POLE 406

19J/ K37-P4 0.37 kW 4 POLE

19J/ K75-P4 0.75 kW 4 POLE

19J/ 1K5-P2 1.5 kW 2 POLE 420 225 483 541 311 483 438 8 14 40x6 36 14 640

19J/ 2K2-P2 2.2 kW 2 POLE 450

19J/ 3K7-P2 3.7 kW 2 POLE 520

24J/ K37-P6 0.37 kW 6 POLE

24J/ K55-P6 0.55 kW 6 POLE

24J/ K75-P4 0.75 kW 4 POLE

24J/ 1 K1-P4 1.1 kW 4 POLE

24J/ 1K5-P4 1.5 kW 4 POLE 430

24J/ 2K2-P4 2.2 kW 4 POLE 460

30J/ K55-P6 0.55 kW 6 POLE

30J/ K75-P6 0.75 kW 6 POLE 22530J/ 1K1-P6 1.1 kW 6 POLE 450

30J/ 1K5-P6 1.5 kW 6 POLE 480 280 762 821 483 762 711 12 14 40x6 36 18 920

30J/ 1K5-P4 1.5 kW 4 POLE 450 225

30J/ 2K2-P4 2.2 kW 4 POLE 480

30J/ 3K7-P4 3.7 kW 4 POLE 280

30J/ 5 K5-P4 5.5 kW 4 POLE

38J/ 1K5-P6 1.5 kW 6 POLE 510

38J/ 2K2-P6 2.2 kW 6 POLE 560

38J/ 3K7-P6 3.7 kW 6 POLE 280 36

38J/ 5 K5-P6 5.5 kW 6 POLE

38J/ 5K5-P4 5.5 kW 4 POLE 560 965 1035 597 965 914 16 18 65x6 18 1160

38J/ 7K5-P4 7.5 kW 4 POLE 590

38J/ 11K-P4 11 kW 4 POLE

38J/ 15K-P4 15 kW 4 POLE

38J/ 18K5-P4 18.5 kW 4 POLE 870 48J/ 5K5-P6 5.5 kW 6 POLE 640

48J/ 7K5-P6 7.5 kW 6 POLE 770 305 41

48J/ 11K-P6 11 kW 6 POLE 770

48J/ 15K-P6 15 kW 6 POLE 870

48J/ 18K5-P6 18.5 kW 6 POLE 910 1219 1289 737 1220 1143 20 18 65x6 76 22 1480

48J/ 18K5-P4 18.5 kW 4 POLE 870 500 41

48J/ 22K-P4 22 kW 4 POLE 870

48J/ 30K-P4 30 kW 4 POLE 910

48J/ 37K-P4 37 kW 4 POLE

48J/ 45K-P4 45 kW 4 POLE

60J/ 18K5-P6 18.5 kW 6 POLE 920

60K/ 22K-P6 22 kW 6 POLE 920

60J/ 30K-P6 30 kW 6 POLE 1000 1526 1626 921 1524 1422 24 18 65x8 78

60J/ 37K-P6 37 kW 6 POLE 1060

60J/ 45K-P6 45 kW 6 POLE 60J/ 55K-P6 55 kW 6 POLE

LO N G CASIN G DUCT MO UN TED SHO RT CASIN G WALL MO UN TED

38 0

38 0

40 6

40 6

43 0

52 4

59 0

760 305

1000 76

41

225 610 668 381 610 559 12 14 40x6 36 18 770

225 305 349 203 305 273 8 10 40x6 36 14 440

225 381 425 241 381 343 8 11 40x6 36 14 530

Notes :

[1] All dimensions are in mm subject to tolerence as per IS 2102. [2] Power Supply 415 V 10%, 3 PH, 50 Hz 5%, AC [3] Motor Degree of protection : IP-55

[4] Motor Class of Insulation : 'F' (temp limited to class ' B') [5] Painting Specification - 1 Coat of primer & 1 coat of synthetic enamel paint of colour D. A. Grey

L1

BPCD

AINSIDE

M

A

IRFLOW

C.L.

OFINSP

DOOR

NO OFF WINGS DEPENDS ON FANMODEL

'F' NOS 'G' HOLES EQUISPACED ON

'K' FLANGE. HOLES ON CRS FOR SIZES24J, 30J, 48J & 60J, OFF CENTRES FOROTHER SIZES.

CLOF INSP DOOR

'C'

'E' CRS. 4 NO S 12 HOLES FOR12K-24J FANS

4 NO S 14 HOELS FOR30J-60 J FANS

4 LUGS 12K-30J FAN5 LUGS 38J-48J FAN

'N ' HOLESAT'P' PCD.

' F ' N O S ' G ' H O L E S

E Q U I S P A C E D O N ' K ' F L A N G E .

H O L E S O N C R S F O R S I Z E S 2 4 J -

3 0 J & 4 8 J , O F F C E N T ER S F O R

O T H E R S I Z E S .

NO LEG FOR1 2 K-24J

FANS 4 NOS 14 HOLES

FOR30 J-48J FANS

'D' 'E' CRS.

'D'

'C'

AIR

FLOW

ELEVATIO N VIEW FRO M IMP ELLER END ELEVATIO N

VIEW FRO M IMP ELLER END

M

'A'Inside

'B'PCD

Ta ble 1

8/2/2019 Axial Flow Fan Selection

4/8

SELECTION CHART STAN DARD AXIAL FLO W FAN

Ta b le 2

Sl. Fa n Mo d el Fa n d ia Mo to r ra tin g Moto r F/ S Free a ir Vo lum e flo w in m 3 / h r a t d ifferen t Sta tic p ressu re in m m w g

No. in m m kw / p o le in rp m m 3/ h r 5 10 15 20 25 30 35 40 50 60 7 0 80 9 0 100 110

1 1 2 K/ K3 7 -P2 3 0 5 0 . 3 7 / 2 2 8 0 0 2 3 0 0 2 0 0 0 1 7 5 0 1 4 0 0

2 1 2 K/ K3 7 -P2 3 0 5 0 . 3 7 / 2 2 8 0 0 3 9 0 0 3 2 0 0 3 0 0 0 2 6 5 0

3 1 2 K/ K5 5 -P2 3 0 5 0 . 5 5 / 2 2 8 0 0 4 4 0 0 3 8 5 0 3 6 5 0 3 3 0 0

4 1 5 J / K3 7 -P4 3 8 1 0 . 3 7 / 4 1 4 4 0 1 7 5 0 1 4 0 0 8 5 0

5 1 5 J / K3 7 -P4 3 8 1 0 . 3 7 / 4 1 4 4 0 4 5 0 0 3 7 0 0 3 1 0 0

6 1 5 J / K5 5 -P2 3 8 1 0 . 5 5 / 2 2 8 5 0 4 5 0 0 4 1 0 0 3 9 0 0 3 7 0 0 3 3 0 0 3 0 0 0 2 6 0 0

7 1 5 J / K7 5 -P2 3 8 1 0 . 7 5 / 2 2 8 5 0 5 6 0 0 5 3 0 0 5 1 0 0 5 0 0 0 4 6 0 0 4 3 0 0 3 7 0 0

8 1 5 J / 1 K1 -P2 3 8 1 1 . 1 / 2 2 8 5 0 7 2 0 0 6 7 0 0 6 5 0 0 6 2 0 0 5 7 0 0 5 4 0 0 5 0 0 0

9 1 5 J / 1 K5 -P2 3 8 1 1 . 5 / 2 2 8 5 0 8 5 0 0 8 0 0 0 7 8 5 0 7 3 0 0 7 1 0 0 6 8 0 0 6 3 0 0

1 0 1 9 J / K3 7 -P4 4 8 3 0 . 3 7 / 4 1 4 4 0 6 7 5 0 6 0 0 0 5 5 0 0 4 4 0 0

1 1 1 9 J / K7 5 -P4 4 8 3 0 . 7 5 / 4 1 4 4 0 8 6 0 0 8 0 0 0 7 5 0 0 6 2 0 0

1 2 1 9 J / 1 K5 -P2 4 8 3 1 . 5 / 2 2 9 0 0 7 5 0 0 6 5 0 0 6 2 0 0 6 0 0 0 5 8 0 0 5 2 0 0 4 5 0 0 3 5 0 0

1 3 1 9 J / 2 K2 -P2 4 8 3 2 . 2 / 2 2 9 0 0 1 1 5 0 0 1 0 0 0 0 9 8 0 0 9 5 0 0 9 0 0 0 8 6 0 0 7 5 0 0 6 5 0 0

1 4 1 9 J / 3 K7 -P2 4 8 3 3 . 7 / 2 2 9 0 0 1 5 3 0 0 1 4 2 0 0 1 3 8 5 0 1 3 6 0 0 1 3 1 0 0 1 2 7 0 0 1 1 7 0 0 1 0 5 0 0

1 5 2 4 J / K3 7 -P6 6 1 0 0 . 3 7 / 6 9 4 0 4 9 0 0 4 0 0 0 2 2 0 0

1 6 2 4 J / K5 5 -P6 6 1 0 0 . 5 5 / 6 9 4 0 1 1 0 0 0 8 7 0 0 8 0 0 0

1 7 2 4 J / K7 5 -P4 6 1 0 0 . 7 5 / 4 1 4 4 0 1 0 0 0 0 9 0 0 0 8 3 0 0 7 0 0 0

1 8 2 4 J / 1 K1 -P4 6 1 0 1 . 1 / 4 1 4 4 0 1 3 5 0 0 1 2 0 0 0 1 0 0 0 0 9 8 0 0

1 9 2 4 J / 1 K5 -P4 6 1 0 1 . 5 / 4 1 4 4 0 1 5 5 0 0 1 3 6 0 0 1 3 0 0 0 1 1 3 0 0

2 0 2 4 J / 2 K2 -P4 6 1 0 2 . 2 / 4 1 4 4 0 1 7 0 0 0 1 6 5 0 0 1 5 5 0 0 1 4 0 0 0

2 1 2 4 K/ 5 K5 -P2 6 1 0 5 . 5 / 2 2 9 5 0 1 9 5 0 0 1 8 0 0 0 1 7 9 0 0 1 7 8 0 0 1 7 1 0 0 1 6 5 0 0 1 5 5 0 0 1 4 5 0 0 1 3 5 0 0 1 2 3 0 0 1 1 0 0 0

2 2 2 4 K/ 7 K5 -P2 6 1 0 7 . 5 / 2 2 9 5 0 2 2 5 0 0 2 1 5 0 0 2 1 2 5 0 2 1 0 0 0 2 0 5 0 0 2 0 0 0 0 1 9 0 0 0 1 8 5 0 0 0 1 7 5 0 0 1 6 0 0 0 1 4 5 0 0

2 3 2 4 K/ 1 1 K-P2 6 1 0 1 1 / 2 2 9 5 0 2 8 5 0 0 2 7 0 0 0 2 6 7 5 0 2 6 5 0 0 2 6 0 0 0 2 5 5 0 0 2 4 5 0 0 2 3 0 0 0 2 2 0 0 0 2 1 0 0 0 2 0 0 0 0

2 4 3 0 J / K5 5 -P6 7 6 2 0 . 5 5 / 6 9 4 0 1 0 5 0 0 9 5 0 0 8 0 0 0 6 0 0 0

2 5 3 0 J / K7 5 -P6 7 6 2 0 . 7 5 / 6 9 4 0 1 5 0 0 0 1 3 5 0 0 1 1 7 5 0 9 0 0 0

2 6 3 0 J / 1 K1 -P6 7 6 2 1 . 1 / 6 9 4 0 1 8 0 0 0 1 7 0 0 0 1 5 0 0 0 1 2 0 0 0

2 7 3 0 J / 1 K5 -P6 7 6 2 1 . 5 / 6 9 4 0 2 1 5 0 0 2 0 0 0 0 1 8 0 0 0 1 5 8 0 0

2 8 3 0 J / 1 K5 -P4 7 6 2 1 . 5 / 4 1 4 5 0 1 4 0 0 0 1 3 0 0 0 1 2 0 0 0 1 1 3 0 0 1 0 2 5 0 9 0 0 0 8 0 0 0

2 9 3 0 J / 2 K2 -P4 7 6 2 2 . 2 / 4 1 4 5 0 1 8 5 0 0 1 7 0 0 0 1 5 8 0 0 1 5 0 0 0 1 4 0 0 0 1 2 8 0 0 1 1 0 0 0

3 0 3 0 J / 3 K7 -P4 7 6 2 3 . 7 / 4 1 4 5 0 2 2 0 0 0 2 0 5 0 0 1 9 8 0 0 1 8 5 0 0 1 7 8 0 0 1 6 5 0 0 1 4 5 0 0

3 1 3 0 J / 5 K5 -P4 7 6 2 5 . 5 / 4 1 4 5 0 3 4 0 0 0 3 2 0 0 0 3 1 0 0 0 2 9 0 0 0 2 7 5 0 0 2 6 0 0 0 2 4 0 0 0

3 2 3 8 J / 1 K5 -P6 9 6 5 1 . 5 / 6 9 6 0 1 9 5 0 0 1 7 0 0 0 1 5 2 5 0 1 3 0 0 0 9 8 0 0

3 3 3 8 J / 2 K2 -P6 9 6 5 2 . 2 / 6 9 6 0 2 5 0 0 0 2 1 5 0 0 1 9 5 0 0 1 8 0 0 0 1 4 8 0 0

3 4 3 8 J / 3 K7 -P6 9 6 5 3 . 7 / 6 9 6 0 3 6 5 0 0 3 3 5 0 0 3 1 5 0 0 2 9 5 0 0 2 6 5 0 0

3

8/2/2019 Axial Flow Fan Selection

5/84

3 5 3 8 J / 5 K5 -P6 9 6 5 5 . 5 / 6 9 6 0 4 5 0 0 0 4 2 0 0 0 3 9 0 0 0 3 7 0 0 0 3 4 0 0 0

3 6 3 8 J / 5 K5 -P4 9 6 5 5 . 5 / 4 1 4 7 5 3 0 0 0 0 2 6 0 0 0 2 5 0 0 0 2 4 5 0 0 2 3 0 0 0 2 2 0 0 0 1 8 0 0 0 1 5 0 0 0

3 7 3 8 J / 7 K5 -P4 9 6 5 7 . 5 / 4 1 4 7 5 3 9 0 0 0 3 5 0 0 0 3 3 0 0 0 3 2 5 0 0 3 0 5 0 0 3 0 0 0 0 2 6 0 0 0 2 2 0 0 0

3 8 3 8 J / 1 1 K -P4 9 6 5 1 1 / 4 1 4 7 5 4 8 0 0 0 4 6 0 0 0 4 5 0 0 0 4 4 0 0 0 4 2 5 0 0 4 1 0 0 0 3 7 5 0 0 3 2 5 0 0

3 9 3 8 J / 1 5 K -P4 9 6 5 1 5 / 4 1 4 7 5 6 1 0 0 0 5 6 0 0 0 5 4 5 0 0 5 4 0 0 0 5 1 5 0 0 5 1 0 0 0 4 7 0 0 0 4 4 0 0 0

4 0 3 8 J / 1 8 K5 -P4 9 6 5 1 8 . 5 / 4 1 4 7 5 6 8 0 0 0 6 5 0 0 0 6 3 0 0 0 6 2 0 0 0 6 0 0 0 0 5 8 5 0 0 5 4 5 0 0 5 1 0 0 0

4 1 4 8 J / 5 K5 - P6 1 2 1 9 5 . 5 / 6 9 7 5 4 2 0 0 0 3 6 0 0 0 3 4 5 0 0 3 0 5 0 0 2 8 0 0 0 2 2 0 0 0

4 2 4 8 J / 7 K5 - P6 1 2 1 9 7 . 5 / 6 9 7 5 5 5 0 0 0 4 7 0 0 0 4 5 5 0 0 4 3 0 0 0 3 9 0 0 0 3 5 0 0 0

4 3 4 8 J / 1 1 K- P6 1 2 1 9 1 1 / 6 9 7 5 7 2 0 0 0 6 2 0 0 0 5 9 5 0 0 5 7 0 0 0 5 2 5 0 0 5 0 0 0 0

4 4 4 8 J / 1 5 K- P6 1 2 1 9 1 5 / 6 9 7 5 8 3 0 0 0 7 7 0 0 0 7 4 5 0 0 6 9 0 0 0 6 7 5 0 0 6 4 0 0 0

4 5 4 8 J / 1 8 K5 -P6 1 2 1 9 1 8 . 5 / 6 9 7 5 9 0 0 0 0 8 5 0 0 0 8 1 0 0 0 7 5 0 0 0 7 3 0 0 0 7 0 0 0 0

4 6 4 8 J / 1 8 K5 -P4 1 2 1 9 1 8 . 5 / 4 1 4 8 0 6 2 0 0 0 5 0 0 0 0 4 5 0 0 0 4 1 0 0 0 3 8 0 0 0 3 5 0 0 0 2 8 0 0 0

4 7 4 8 J / 2 2 K- P4 1 2 1 9 2 2 / 4 1 4 8 0 7 1 0 0 0 5 9 0 0 0 5 7 0 0 0 5 4 0 0 0 4 9 0 0 0 4 4 0 0 0 3 9 0 0 0

4 8 4 8 J / 3 0 K- P4 1 2 1 9 3 0 / 4 1 4 8 0 9 2 0 0 0 8 0 0 0 0 7 5 0 0 0 7 0 0 0 0 6 8 0 0 0 6 2 0 0 0 5 3 0 0 0

4 9 4 8 J / 3 7 K- P4 1 2 1 9 3 7 / 4 1 4 8 0 1 0 2 0 0 0 8 8 0 0 0 8 4 0 0 0 8 0 0 0 0 7 5 0 0 0 7 1 0 0 0 6 7 0 0 0

5 0 4 8 J / 4 5 K- P4 1 2 1 9 4 5 / 4 1 4 8 0 1 5 0 0 0 0 1 0 2 0 0 0 9 8 0 0 0 9 5 0 0 0 9 0 0 0 0 8 5 0 0 0 7 8 0 0 0

5 1 6 0 J / 1 8 K5 -P6 1 5 2 4 1 8 . 5 / 6 9 7 5 5 0 0 0 0 4 0 0 0 0

5 2 6 0 J / 2 2 K- P6 1 5 2 4 2 2 / 6 9 7 5 6 2 0 0 0 5 0 0 0 0

5 3 6 0 J / 3 0 K- P6 1 5 2 4 3 0 / 6 9 7 5 8 5 0 0 0 6 9 0 0 0

5 4 6 0 J / 3 7 K- P6 1 5 2 4 3 7 / 6 9 7 5 1 0 0 0 0 0 9 0 0 0 0

5 5 6 0 J / 4 5 K- P6 1 5 2 4 4 5 / 6 9 7 5 1 2 4 0 0 0 1 0 8 0 0 0

5 6 6 0 J / 5 5 K- P6 1 5 2 4 5 5 / 6 9 7 5 1 3 9 0 0 0 1 2 7 0 0 0

5 7 7 5 J1 / 2 / 3 0 K -P6 1 9 0 5 3 0 / 6 9 7 5 1 1 0 0 0 0 9 3 0 0 0 8 0 0 0 0 5 0 0 0 0

5 8 7 5 J1 / 2 / 3 7 K -P6 1 9 0 5 3 7 / 6 9 7 5 1 3 0 0 0 0 1 1 5 0 0 0 1 0 0 0 0 0 6 0 0 0 0

5 9 7 5 J1 / 2 / 5 5 K -P6 1 9 0 5 5 5 / 6 9 7 5 1 8 0 0 0 0 1 6 5 0 0 0 1 5 0 0 0 0 1 3 0 0 0 0

6 0 7 5 J / 2 / 7 5 K- P6 1 9 0 5 7 5 / 6 9 7 5 2 1 8 0 0 0 2 0 8 0 0 0 1 8 8 0 0 0 1 6 8 0 0 0

6 1 7 5 J / 5 5 K- P6 1 9 0 5 5 5 / 6 9 7 5 1 0 5 0 0 0 9 5 0 0 0 8 5 0 0 0

6 2 7 5 J / 7 5 K- P6 1 9 0 5 7 5 / 6 9 7 5 1 4 0 0 0 0 1 1 5 0 0 0 9 5 0 0 0

NOTE :

1 . Fa n s le ctio n is b a se d on a i r a t 2 0 C and density 1.2 kg/ m3

2 . Fa n p e r fo rma n c e a n d to le ra n ce a s p e r IS 3 5 8 8 1 9 8 7 .

3. For selection of Fans in other solidity (no of bla des), or in intermed iate performa nce point please refer to Regiona l/ Bran ch Offices or Factory

Sl. Fa n Mod el Fa n d ia Moto r ra ting Mo to r F/ S Free a ir Vo lum e flo w in m 3 / h r a t d ifferen t Sta tic p ressu re in m m w g

No . in m m kw / p o le in rp m m 3/ h r 5 10 15 20 25 30 35 40 50 60 7 0 80 9 0 100 110

8/2/2019 Axial Flow Fan Selection

6/85

Features

MARATHON Electric offers wide range

of Centrifugal Fans with highly efficient

impellers of type Backward Inclined,

Backward Curved, Aerofoiled, ForwardCurved and Straight Radial, depending

upon application.

MARATHON Electric Centrifuga l Fans

are suitable for air delivery upto

30 0,0 00 M3/ Hr and Sta tic Pressure

upto 800 MM WG. Fans are available

both in single inlet single width (SISW)

and in double inlet double width

(DIDW) versions.

Construction :

Centrifugal Fans are usually made of

mild steel (IS 1079/ 2062) rigid casing

with Inspection window and drain plug.

The impeller is mounted on C-40 (IS

CENTRIFUGAL FAN 1570) shaft. Double Row Ball/ Sphericalroller Bearings are used for smooth

operation. Fans are either belt driven

or direct coupled. Direct driven Fans,

with Impeller mounted directly on motor

shaft, are also available.

s Standard Fans are painted with

synthetic enamel paint.s Other than mild steel, fans are

offered in Stainless Steel and

Aluminium Construction also,

depending on application need.

s For High temperature (from 100C

to 350C) application, Aluminium

cooling disc is provided and the

fan is painted with Heat Resistant

Aluminium Paint.

Special features

Following Special Features are

provided depending application need.

s Spark Proof Construction.

s FRP Coating.

s Zinc Sprayed.

s Epoxy Paint.

s Chlorinated rubber paint.

Following optional acessories are also

available.

s Common base frame for Fan and

Motor.

s V-belt drive set.

s Belt guard.

s Motor slide rail

s Foundation bolt

s Filter

s Filter frame with adapter cone.

s Inlet and outlet flexible connection.

s Inlet box

s Inlet and outlet dampers

s Antivibration mounting.

Backward inclind Backward curved

Radial

Backplate pa ddleAerofoil

Radial tipped

LG 90

LG 270LG 0 LG 45

%

P

Ps

Fanstaticp

ressurePs

ImprellerPowerP

Fanefficiency

%

Discharge Rotation :

Fans are available in different discharge angles from 0

to 315 both in left hand and right hand rotation viewing

from motor end with motor position a s X, Y, W & Z.

Volum e Flow

LG 315

Z

Y X

W

Fan

Reverse the rotation is RD

Motor pos ition

8/2/2019 Axial Flow Fan Selection

7/86

Arrangement 1

Single inlet pedestal

For belt drive. Impeller

overhung. Two bearings on full-

depth pedestal.

Arrangement 3

Single inlet bearer bar

For belt drive. One bearing on

each side of casing, supported

by bearer bars.

Arrangement 4

Single inlet direct drive and stool

For direct drive. Impeller overhung on

motor shaft. No bearings on fan. Motor

feet supported by full-depth pedestal.

Arrangement 6

Double inlet bearer bar

Double inlet, double width fan for

belt drive. One bearing in each inlet,

supported by bearer bars.

Arrangement 7

Single inlet coupling

For coupling drive. Generally as

arrangement 1 but pedestal extended

to receive motor.

Arrangement :

Fans are manufactured in five different drive arrangements depending upon application.

Other p roducts

Pedestal Man cooler

size 19" to 36"

Bracket Man cooler

size 19" to 36"

Tubu lar Ma n cooler

size 19" to 48"

Propeller Fan GPN

size 12" to 18"

Prop eller Fa n BVN/ BVA

size 18" to 36"

Pedestal Air circulators

size 24"

Bracket Air Circulator

size 24" to 30"

8/2/2019 Axial Flow Fan Selection

8/8

MEMI/CAT/AFFCFF/1108/02

ReplacesRMGFETC003.C.01/2008

Specia lized custom b uilt motors Specia lists in short cycle deliveries

Mara thon Electric Motors (Ind ia) Ltd. Registered & Head Office: 58 , Tara tala Road, Kolkata - 70 00 24 . LT Motor & Fan Factory, Paha rpur Works, 58 ,

Tara tala Roa d, Kolkata - 7 00 02 4, Fax: 2 46 9 53 69 / 85 30 , Phone : 09 90 39 00 80 1. Larg e LT Motor & HT Motor Factory, AEI Works 1, Tara tala Roa d,

Kolkata- 70 002 4. Marathon Regional Offices:New Delhi:70 8, Eros Building, 56, Nehru Place; Tel: 011 416 0 71 23 , 093 132 904 02. Chandigarh:

Chamber No. 8 a, 2 Floor, Sco No. 24 41-42 , Sector 22 -C; Tel: 093 161 024 51. Mumbai:11 4 Na vneelam, R.G. Thad ani Ma rg, Worli; Tel: 02 2 32 65

9844, 09322645753, Fax: 022 3040 1555. Pune: 41/ 14, Office Club Swaroop Complex Karve Road; Tel: 020 254 6 3 978 , 09 371 025 388 . Ahmedabad:

415 / Platinum Plaza , Nr. Pushkar Tower, Judge-bunglow-bodakdev Road ; Tel: 07 9 256 0 2 297 , 09 32 704 85 67. Nagpur: 1 Floor, Block A, Tha pa r

Enclave, Plot No. 148, Ramda speth; Tel: 0712 252 6 22 0, 09 373 283 527 . Raipur: 1 Floor, 14 1, Sunderna ga r, Nea r Ada rsh Chowk; Tel: 07 71 22 10

240. 09329128913. Chennai : Door No. 9, Fla t No. 7, 1 Floor, Thiru. Vi. Ka . Roa d, Royapettah, (opp , Sathyam Thea tre), Tel: 04 4 43 51 01 52 ,

0938210 2392, Fax: 044 4351 0153. Secunderabad: Cabin No. 47, 3 03, Swapnalok Complex, 92, S. D. Road; Tel: 040 278 1 2 724, 093 9134 061 9.

Bangalore : C1-101 , White House, 15 Cross, 6 Main R. T. Nag ar; Tel: 08 0 26 55 8 72 9, 09 34 12 79 42 9. Bhubaneswa r : C/ o. Plot No. 16 -b, Engineers

Colony, Old Station Baza r; Tel: 0674 231 374 4, 09 338 212 907 . Jamsbedpur: C/ o. Mr. D. P. Gho sh, House No . 7 , Bidyasag ar Path, Uliyan, Kad ma;

Tel: 0 93 346 120 14. Mara thon Electric India Pvt. Ltd. Sec.-11 Model Town, Farida ba d - 121 00 6 (INDIA), Tel: 01 29 2 28 64 21 / 22 65 34 0; Fax : 012 9-

22 84 85 5, email : gemi.sales@rega lbeloit.com GEMI Reg iona l Offices : Ahmedbad : 40 6, Veda nt Complex, 7, Ka lpana Colony, Off. C.G. Roa d,

Navrangpura, Ahmedaba d-38000 9, Tel: 079-26561 819 , 98256 115 02. Fax: 079-26560 452 . Chennai : 6 Arcot Road , Vad ap alani, Chennai - 6000 92 ,

Tel: 044-421366 97, 423 33353 , 98404 29331 , Fax: 044-4208232 2. Jaipur : C/ o Flat N o. 1 04 , Block A, Rama Heritage Apartments, Central Spine,Vidhyadhar Nagar, Jaipur-302 023. Ph: 9982655661. Kolkata : 58, Tara tala Road, Kolkata - 700 024 ; Tel: 91 033 246 955 60/ 61, Fax: 033

24695369/ 8530. Mumbai : B-908 / 90 9, Sa ga r Tech Plaz a, Andheri - Kurla Road, Sa ki Na ka, Andheri (East), Mumba i - 4000 72 , Tel: 02 2-28 52 31 06 ,

9833756269, Fax: 022-28528938. Pune : C/ o: 8 , Sethu Apa rtments, Right Bhusari Colony, Paud Road, Kothrud, Pune-41 10 38 , Tel: 020 -652 24 84 6,

9960604846. Bangalore : Tel:93 422 99 99 5. Hyderabad : Tel:939 30 02 66 5. Delhi : Flat No. 516 -51 8, 5 th Floor, Antriksh Bhawan, 2 2 K.G. Marg N ew

Delhi -01 Tel: 9873 18 42 09 .

A R EGAL-BELOIT C OMPANY