Asgard Double Ended Bike Locker Instructions
4
It is always recommended to anchor the unit to the ground. Drill through the four holes in the base rails of the unit using 6mm dia masonry drill to a depth of 70mm. Screw in the anchor fixings. (These have a self cutting thread). Additional ZHWNUT42 and ZSCREW254 have been supplied for bolting 2 units together using the side panels. TOOLS REQUIRED Power driver POSI-DRIV screwdriver, 6mm dia. masonry drill and a 13mm socket or spanner. DOUBLE ENDED BIKE LOCKER BASE INSTRUCTIONS Flat and firm base. Recommended: concrete, tarmac or paving flags. Min. distance from walls/ shrubbery: 1000mm. Min. base size (WxDxH) 1000mm x 2200mm x 50mm. LEVELING THE UNIT Correctly level the constructed unit using the shims (ZCOMPPLAS) provided prior to fixing the unit to the ground. Slide the packing pieces under the corners of the unit base as required until an equal gap has been achieved around the door allowing for its smooth operation and alignment. Warning: some panels may weigh over 20Kg. Beware of manual handling 13mm Spanner 4mm Allen Key 18V For maintenance instructions of this product visit www.asgardsss.co.uk x2 SEALANT ZSCREW32 x6 ZSILCO1 x1 ZSCREW100 x58 ZSCREW254 X12 ZCOMPPLZS02 x8 ZCOMPPLAS22-23-24 x6 2x 2mm, 2x 3mm, 2x 5mm 6mm Dia. Posi-Driv Screwdriver ZHWNUT42 x4 35190 x2 FIXING CHANNEL 42655 x2 PARTITION PANEL 47381 x1 PARTITION END 046849 x2 SIDE PANEL 42172 x1 DOOR FRAME x1 LEFT HANDED: 43802 OR RIGHT HANDED: 43801 LEFT HANDED SHOWN DOOR FRAME x1 LEFT HANDED: 43802 OR RIGHT HANDED: 43801 LEFT HANDED SHOWN SIDE PANEL 42172 x1 TOP PANEL 46846 x1 TOP STIFFENER 42397 x1
-
Upload
asgard-secure-steel-storage -
Category
Documents
-
view
220 -
download
5
description
For more information please visit www.asgardsss.co.uk
Transcript of Asgard Double Ended Bike Locker Instructions
It is always recommended to anchor the unit to the ground. Drill through the four holes in the base rails of the unit using 6mm dia masonry drill to a depth of 70mm. Screw in the anchor fixings. (These have a self cutting thread). Additional ZHWNUT42 and ZSCREW254 have been supplied for bolting 2 units together using the side panels.
TOOLS REQUIREDPower driver POSI-DRIV screwdriver, 6mm dia. masonry drill and a13mm socket or spanner.
DOUBLE ENDED BIKE LOCKERBASE INSTRUCTIONSFlat and firm base. Recommended: concrete, tarmac or paving flags. Min. distance from walls/ shrubbery: 1000mm.Min. base size (WxDxH) 1000mm x 2200mm x 50mm.
LEVELING THE UNITCorrectly level the constructed unit using the shims (ZCOMPPLAS) provided prior to fixing the unit to the ground. Slide the packing pieces under the corners of the unit base as required until an equal gap has been achieved around the door allowing for its smooth operation and alignment.
Warning: some panels may weigh over 20Kg. Beware of manual handling
13mm Spanner
4mmAllen Key
18V
For maintenance instructions of this product visit www.asgardsss.co.uk
x2
SEAL
ANT
ZSC
REW
32 x
6
ZSIL
CO
1 x
1
ZSC
REW
100
x58
ZSC
REW
254
X12
ZCO
MPP
LZS0
2 x
8
ZCO
MPP
LAS2
2-23
-24
x6
2x 2
mm
, 2x
3mm
, 2x
5mm
6mm Dia.
Posi-DrivScrewdriver
ZHW
NU
T42
x4
3519
0 x
2
FIXING CHANNEL 42655 x2
PARTITION PANEL 47381 x1
PARTITION END 046849 x2SIDE PANEL 42172 x1
DOOR FRAME x1
LEFT HANDED: 43802 OR
RIGHT HANDED: 43801
LEFT HANDED SHOWN
DOOR FRAME x1
LEFT HANDED: 43802 OR
RIGHT HANDED: 43801
LEFT HANDED SHOWN
SIDE PANEL 42172 x1
TOP PANEL 46846 x1
TOP STIFFENER 42397 x1
1
3
5 6
4
2PLEASE NOTE ALL SCREWS ARE FIXED FROM THE INSIDE
x1
x1
x5
x1
x1
x8
x8x4
x4
x5
x5
x5
x2
x7
x24
x5
x10
x2
x1
x1
DOOR FRAME
LEFT HANDED: 43802 OR
RIGHT HANDED: 43801
DOOR FRAME
LEFT HANDED: 43802 OR
RIGHT HANDED: 43801
SIDE PANEL 42172
SIDE PANEL 42172
FIXING CHANNEL 42655 x2
TOP STIFFENER 42397
TOP PANEL 46846
UNIVERSAL HOOKS x2
7 8
9 10
x1
x1
x4
x4
x8
x4
x4
x6 x2 x8
x6
PARTITION END 046849 x2
PARTITION PANEL 47381
www.asgardsss.co.uk047380/21.01.16/KW/R0
