Asgard Compact Shed Instructions
3
It is always recommended to anchor the unit in to the ground. Drill through the four holes in the base of the unit using 6mm dia masonry drill to a depth of 70mm. Screw in the anchor fixings. (These have a self cutting thread). If not anchoring the unit, fit the self seal plugs BEFORE BUILDING to block the fixing holes from underneath. Please note product must be bolted down to comply with LPS1175. TOOLS REQUIRED Power driver POSI-DRIV screwdriver, 6mm dia. masonry drill and a 13mm socket or spanner. COMPACT ZSCREW32 x4 ZSCREW100 x64 ZSCREW340 x18 6mm Dia. 13mm Spanner 18V ZCOMPPLZS02 x4 ZCOMPPLAS22-23-24 x6 2x 2mm, 2x 3mm, 2x 5mm LH SIDE PNAEL 31986 x1 LH DOOR 32253 x1 RH DOOR 32254 x1 BACK PANEL 31974 x1 FASCIA 32082 x1 RAIN GUARD 32030 x1 TOOL RAIL 32171 x1 BASE PANEL 32086 x1 TOP PANEL 31973 x1 RH SIDE PANEL 31987 x1 BASE INSTRUCTIONS Flat and firm base. Recommended: concrete, tarmac or paving flags. Min. distance from walls/ shrubbery: 1000mm. Min. base size (WxDxH) 1280mm x 960mm x 50mm. LEVELING THE UNIT Correctly level the constructed unit using the shims (ZCOMPPLAS) provided prior to fixing the unit to the ground. Slide the packing pieces under the corners of the unit base as required until an equal gap has been achieved around the door allowing for its smooth operation and alignment. For maintenance instructions of this product visit www.asgardsss.co.uk Warning: some panels may weigh over 20Kg. Beware of manual handling Warning: Please keep this key card safe! Refer to if replacement key is required. x2 Posi-Driv Screwdriver 00001 YOUR UNIQUE KEY CODE
-
Upload
asgard-secure-steel-storage -
Category
Documents
-
view
225 -
download
4
description
For more information please visit www.asgardsss.co.uk
Transcript of Asgard Compact Shed Instructions
It is always recommended to anchor the unit in to the ground. Drill through the four holes in the base of the unit using 6mm dia masonry drill to a depth of 70mm. Screw in the anchor fixings. (These have a self cutting thread). If not anchoring the unit, fit the self seal plugs BEFORE BUILDING to block the fixing holes from underneath. Please note product must be bolted down to comply with LPS1175.
TOOLS REQUIREDPower driver POSI-DRIV screwdriver, 6mm dia. masonry drill and a13mm socket or spanner.
COMPACT
ZSC
REW
32 x
4
ZSC
REW
100
x64
ZSC
REW
340
x18
6mm Dia.
13mm Spanner
18V
ZCO
MPP
LZS0
2 x
4
ZCO
MPP
LAS2
2-23
-24
x6
2x 2
mm
, 2x
3mm
, 2x
5mm
LH S
IDE
PNAE
L 31
986
x1
LH D
OO
R 3
2253
x1
RH
DO
OR
322
54 x
1
BAC
K PA
NEL
319
74 x
1
FASCIA 32082 x1
RAIN GUARD 32030 x1
TOOL RAIL 32171 x1
BASE PANEL
32086 x1
TOP PANEL
31973 x1
RH
SID
E PA
NEL
319
87 x
1
BASE INSTRUCTIONSFlat and firm base. Recommended: concrete, tarmac or paving flags. Min. distance from walls/ shrubbery: 1000mm.Min. base size (WxDxH) 1280mm x 960mm x 50mm.
LEVELING THE UNITCorrectly level the constructed unit using the shims (ZCOMPPLAS) provided prior to fixing the unit to the ground. Slide the packing pieces under the corners of the unit base as required until an equal gap has been achieved around the door allowing for its smooth operation and alignment.
For maintenance instructions of this product visit www.asgardsss.co.uk
Warning: some panels may weigh over 20Kg. Beware of manual handling
Warning: Please keepthis key card safe! Referto if replacement key is required.
x2
Posi-DrivScrewdriver
00001
YOUR UNIQUEKEY CODE
1
3
5 6
4
2PLEASE NOTE ALL SCREWS ARE FIXED FROM THE INSIDE
x9
x16 x6
x15 x7
x11
RH
SID
E PA
NEL
319
87
BACK
PAN
EL 3
1974
BASE PANEL
32086
LH S
IDE
PNAE
L 31
986
TOP PANEL 31973
FASC
IA 3
2082
DO NOT TIGHTENSCREWS AT THISSTAGE!
RAIN GUARD 32030
x9
x4
x9
x6
x7
x4
x6 x4
x7
x7
7 8
9 10x18
LH D
OO
R 32
253
RH D
OO
R 32
254
TOOL RAIL 32171
TOOL RAIL 32171
x4
www.asgardsss.co.uk
32234/11.12.15/KW/REV1
