Sheet16801AS/NZS 1553.2:1999 (Revocked)Covered Electrodes for Welding - Part 2: Low and Intermediate Alloy Steel Electrodes for Manual Metal-Arc Welding of Carbon Steels and Low and Intermediate Alloy Steels , AS1553.2 , AS/NZS1553.26802AS/NZS 1553.3:1996 (Revocked)Covered Electrodes for Welding Part 3: Corrosion-Resisting Chromium and Chromium-Nickel Steel Electrodes , AS1553.3 , AS/NZS1553.36803AS/NZS 1554 Set:2008Structural steel welding Set , AS1554 , AS/NZS15546804AS/NZS 1554.1:2004Structural Steel Welding - Part 1: Welding of Steel Structures-Amendment 1: 1/20/2005 , AS1554.1 , AS/NZS1554.16805AS/NZS 1554.2:2003Structural steel welding Part 2: Stud welding (steel studs to steel)-Incorporating Amendment 1: 12/2003; Supersedes SAA AS 1554.2:1993 , AS1554.2 , AS/NZS1554.26806AS/NZS 1554.3:2008Structural steel welding - Welding of reinforcing steel , AS1554.3 , AS/NZS1554.36807AS/NZS 1554.4:2004Structural steel welding Part 4: Welding of high strength quenched and tempered steels , AS1554.4 , AS/NZS1554.46808AS/NZS 1554.5:2004Structural Steel Welding Part 5: Welding of Steel Structures Subject to High Levels of Fatigue Loading , AS1554.5 , AS/NZS1554.56809AS/NZS 1554.6:1994Structural Steel Welding - Part 6: Welding Stainless Steels for Structural Purposes , AS1554.6 , AS/NZS1554.66810AS/NZS 1554.7:2006Structural steel welding Part 7: Welding of sheet steel structures-First Edition , AS1554.7 , AS/NZS1554.76811AS/NZS 1559:1997Hot-Dip Galvanized Steel Bolts and Associated Nuts and Washers for Tower Construction , AS1559 , AS/NZS15596812AS/NZS 1562.2:1999Design and Installation of Sheet Roof and Wall Cladding - Part 2: Corrugated Fibre-Reinforced Cement , AS1562.2 , AS/NZS1562.26813AS/NZS 1562.3:1996Design and Installation of Sheet Roof and Wall Cladding Part 3: Plastic , AS1562.3 , AS/NZS1562.36814AS/NZS 1567:1997Copper and Copper Alloys - Wrought Rods. Bars and Sections , AS1567 , AS/NZS15676815AS/NZS 1568:1998Copper and Copper Alloys - Forging Stock and Forgings , AS1568 , AS/NZS15686816AS/NZS 1571:1995Copper - Seamless Tubes for Airconditioning and Refrigeration , AS1571 , AS/NZS15716817AS/NZS 1573:1995Copper and Copper Alloys - Wire for Engineering Purposes , AS1573 , AS/NZS15736818AS/NZS 1574:1996Copper and Copper Alloys - Wire for Electrical Purposes , AS1574 , AS/NZS15746819AS/NZS 1576.1:1995Scaffolding Part 1: General Requirements , AS1576.1 , AS/NZS1576.16820AS/NZS 1576.3:1995Scaffolding Part 3: Prefabricated and Tube-And-Coupler Scaffolding , AS1576.3 , AS/NZS1576.36821AS/NZS 1576.5:1995Scaffolding - Part 5: Prefabricated Splitheads and Trestles , AS1576.5 , AS/NZS1576.56822AS/NZS 1576.6:2000Scaffolding Part 6: Metal Tube-and-Coupler Scaffolding-Deemed to Comply with AS/NZS 1576.3 , AS1576.6 , AS/NZS1576.66823AS/NZS 1580.101.1:1999 (Revocked)Paints and Related Materials - Methods of Test - Method 101.1: Conditions of Test - Temperature. Humidity and Airflow Control , AS1580.101.1 , AS/NZS1580.101.16824AS/NZS 1580.101.4:1999Paints and Related Materials - Methods of Test - Method 101.4: Conditions of Test - Temperature Control , AS1580.101.4 , AS/NZS1580.101.46825AS/NZS 1580.101.5:1999Paints and Related Materials - Methods of Test - Method 101.5: Conditions of Test - Temperature and Humidity Control , AS1580.101.5 , AS/NZS1580.101.56826AS/NZS 1580.102.2:1995Paints and Related Materials - Methods of Test - Method 102.2: In-Process Sampling , AS1580.102.2 , AS/NZS1580.102.26827AS/NZS 1580.103.1:1995Paints and Related Materials - Methods of Test - Method 103.1: Examination and Preparation of Samples for Testing-ISO 1513: 1992 , AS1580.103.1 , AS/NZS1580.103.16828AS/NZS 1580.104.1:2000Paints and Related Materials - Methods of Test - Method 104.1: Recommended Materials for Test Panels , AS1580.104.1 , AS/NZS1580.104.16829AS/NZS 1580.106.1:1995Paints and Related Materials - Methods of Test Method 106.1: Preparation of Timber Test Panels for Outdoor Weathering Test , AS1580.106.1 , AS/NZS1580.106.16830AS/NZS 1580.107.2:1995Paints and Related Materials - Methods of Test Method 107.2: Determination of Wet Film Thickness from Wet Film Mass , AS1580.107.2 , AS/NZS1580.107.26831AS/NZS 1580.107.3:1997Paints and Related Materials - Methods of Test Method 107.3: Determination of Wet Film Thickness by Gauge , AS1580.107.3 , AS/NZS1580.107.36832AS/NZS 1580.107.8:1995Paints and Related Materials - Methods of Test Method 107.8: Application of Paint at a Nominated Spreading Rate by Determination of Wet Film Mass (Brush Application) , AS1580.107.8 , AS/NZS1580.107.86833AS/NZS 1580.108.1:1994Paints and Related Materials - Methods of Test - Method 108.1: Determination of Dry Film Thickness on Metallic Substrates - Non-Destructive Methods , AS1580.108.1 , AS/NZS1580.108.16834AS/NZS 1580.202.1:1995Paints and Related Materials - Methods of Test Method 202.1: Density , AS1580.202.1 , AS/NZS1580.202.16835AS/NZS 1580.202.2:1995Paints and Related Materials - Methods of Test Method 202.2: Density of Water-Dispersed Paints Subject to Foaming , AS1580.202.2 , AS/NZS1580.202.26836AS/NZS 1580.204.1:1998Paints and Related Materials - Methods of Test Method 204.1: Fineness of Grind , AS1580.204.1 , AS/NZS1580.204.16837AS/NZS 1580.205.1:1997Paints and Related Materials - Methods of Test Method 205.1: Application Properties - Brushing-Supersedes NZS/AS 1580.205.1: 1981 , AS1580.205.1 , AS/NZS1580.205.16838AS/NZS 1580.205.2:1997Paints and Related Materials - Methods of Test Method 205.2: Application Properties - Conventional Spraying-Supersedes NZS/AS 1580.205.2: 1981 , AS1580.205.2 , AS/NZS1580.205.26839AS/NZS 1580.205.3:1997Paints and Related Materials - Methods of Test Method 205.3: Application Properties - Roller Coating-Supersedes NZS/AS 1580.205.3: 1981 , AS1580.205.3 , AS/NZS1580.205.36840AS/NZS 1580.205.4:1998Paints and Related Materials - Methods of Test Method 205.4: Application Properties - Airless Spraying , AS1580.205.4 , AS/NZS1580.205.46841AS/NZS 1580.208.1:1999Paints and Related Materials - Methods of Test - Method 208.1: Thinner Compatibility , AS1580.208.1 , AS/NZS1580.208.16842AS/NZS 1580.211.1:1995Paints and Related Materials - Methods of Test Method 211.1: Degree of Settling , AS1580.211.1 , AS/NZS1580.211.16843AS/NZS 1580.211.2:1995Paints and Related Materials - Methods of Test Method 211.2: Ease of Manual Re-Incorporation , AS1580.211.2 , AS/NZS1580.211.26844AS/NZS 1580.213.1:1997Paints and Related Materials - Methods of Test Method 213.1: Relative Dry Hiding Power-Supersedes AS 1580.213.1: 1993 and NZS/AS 1580.213.1: 1993 , AS1580.213.1 , AS/NZS1580.213.16845AS/NZS 1580.214.0:1996Paints and Related Materials - Methods of Test - Method 214.0: Rheological Properties - Guide to Test Methods , AS1580.214.0 , AS/NZS1580.214.06846AS/NZS 1580.214.1:1997Paints and Related Materials - Methods of Test Method 214.1: Consistency - Stormer Viscometer , AS1580.214.1 , AS/NZS1580.214.16847AS/NZS 1580.214.2:1996Paints and Related Materials - Methods of Test Method 214.2: Consistency - Flow Cup , AS1580.214.2 , AS/NZS1580.214.26848AS/NZS 1580.214.4:1996Paints and Related Materials - Methods of Test Method 214.4: Consistency - Rotothinner , AS1580.214.4 , AS/NZS1580.214.46849AS/NZS 1580.214.5:1997Paints and Related Materials - Methods of Test Method 214.5: Consistency - Rotational Viscometer-Supersedes AS 1580.214.5: 1990 and NZS/AS 1580.214.5: 1990 , AS1580.214.5 , AS/NZS1580.214.56850AS/NZS 1580.214.6:1995Paints and Related Materials - Methods of Test - Part 214.6: Consistency - ISO Flow Cups-ISO 2431: 1993 , AS1580.214.6 , AS/NZS1580.214.6

Sheet2

Sheet3