Standard Parts List

Standard Parts List

Version 1.6 as of the December 13, 2021

JLR Projects Standard Parts List

Preferred types are highlighted ORANGE

JLR Contacts: Ian English Advanced Manufacturing Engineering Tel: +44 (0) 2476563153 email: [email protected]

Simon Jenkins Advanced Manufacturing Engineering Mobile: +44 (0) 7736912409 email: [email protected]

Russell Beattie Advanced Manufacturing Engineering Mobile: +44 (0) 7469039574 email: [email protected]

ifm Contacts: Paul Stansfield Industry 4.0 System Sales Manager Tel: +44 (0) 2082130000 email: [email protected]

Klaus-Peter Prause Global KAM Automotive Industry Mobile: +49 (0) 15114817604 email: [email protected]

JLR Manufacturing Engineering Version 1.6 Standards and Controls Department as per December 13, 2021 of 47

Content A – R

1

A:1 Proximity Sensors Type M8/M12/M18/M30 - Series Robust IxR 3 A:2 Proximity Sensors Types M8/M12/M18/M30 (Weld Field Immune) Series IxW K Factor 1 4 A:3 Proximity Sensors Type IMC & IDC (Weld Field Immune) – K Factor 1 5 A:4 Proximity Sensors Cylindrical for detection of steel targets where longer sensing is required 6 A:5 Proximity Sensors Rectangular for detection of steel targets where longer sensing is required 7 A:6 Proximity Sensors “K0 aluminium immune” for detection of metal studs & nuts in aluminium 8 B:1 Proximity Sensor Brackets for M8/M12/M18/M30 & IDC/IMC 9 C:1 Photocells Type OG 10 C:2 Photocells Type O5 11 C:3 Photocells Type O6 12 C:4 Rectangular OJ housing; Plastics; DC PNP; M8 connector; Red light 660 nm 13 D:1 Photocells Laser Distance Type O1D, O5D, OGD & OID – Time-Of-Flight Principle 14 D:2 Photocell Laser Light Type OG ( M18) & O5 (Rectangular) 15 D:3 Rectangular OJ housing; Plastics; DC PNP; M8 connector; Visible Laser Light 650 nm 16 E:1 Fork & Angle Sensors Type OPU & OPL 17 F:1 Photocells Accessories - Mounting brackets and clamps 18 F:2 Photocells Accessories - Prismatic reflectors 19 G:1 Ultrasonic position sensors M18 / M18 Cube 20 H:1 Capacitive Proximity Sensors – For non-metallic part detection – short range 21 I:1 Updated: Sensor Mounting System For Types Inductive & Photocell - M12/M18/M30, IME & IMC 22 I:2 Sensor Mounting System Photocell For Types OJ & O5 & OGD & Ultrasonic UG 23 I:3 Sensor Mounting System - Rods 24 J:1 Connection Technology - Jumper M12 plug straight / M12 socket straight 25 J:2 Connection Technology - Jumper M12 plug straight / M12 socket angled 26 J:3 Connection Technology - T-Splitter M12 / 2 x M12 27 J:4 Connection Technology - Jumper M12 plug straight / valve socket type B angled 28 J:5 Connection Technology - Jumper M12 plug straight / M8 socket angled 29 J:6 Connection Technology - Jumper M12 plug straight / M8 socket straight 30 J:7 Connection Technology - Jumper M12 plug straight / M8 socket angled 31 J:8 Connection Technology - Socket M12 angled & straight 32 K:1 Safety Proximity Sensors Type GF / GG / GI / GM & Relays G150xS 33 L:1 Vision Sensors Type O2D & O2V 34 L:2 Vision Sensors Type O2D & O2V – Connecting Devices 35 L:3 Vision Sensors Type O2D & O2V - Illumination Units 36 L:4 Vision Sensors Type O2D & O2V - Touch Panel PC 37 M:1 Flow Sensors Type SM & SI 38 N:1 Flow Sensors Type SV 39 O:1 Pressure Sensors Type PN7 40 O:2 Pressure Sensors Type PN2 41 P:1 Combined Temperature Sensor Type TN 42 P:2 Separate Temperature Probe Type TT & Evaluation Unit Type TR 43 Q:1 Compressed Air Meter Type SD 44 R:1 Level Sensors - Type LR 45 R:2 Level Sensors - Type LK 46 Information on the version no. 47

mailto:[email protected]













A:1 Proximity Sensors Type M8/M12/M18/M30 - Series Robust IxR

Full metal housing including front face for panel detection

Cylindrical type with M12 plug – body safe coated

Design ifm article Type Sensing range Output Comments

IER200

IEK M8 x 1 Housing 60 mm

2 mm flush Mountable

DC PNP Normally open

Long housing

IFR200 IFK M12 x 1

Housing 60 mm 4 mm flush Mountable

IGR200 IGK M18 x 1


IIR200 IIK M30 x 1.5







https://www.ifm.com/gb/en/product/IER200

https://www.ifm.com/gb/en/product/IFR200

https://www.ifm.com/gb/en/product/IGR200

https://www.ifm.com/gb/en/product/IIR200









A:2 Proximity Sensors Types M8/M12/M18/M30 (Weld Field Immune) Series IxW K Factor 1

Sensors to detect aluminium or steel targets - cylindrical type with M8 * / M12 plug – bodysafe coated

Use wherever possible flush mountable items only!


Use new series with extended sensing range flush mountable to avoid sensing problems!

IEW200 *

IEB M8 x 1 Housing 40 mm


DC PNP

Normally open

Correction Factor 1

Short

Housing IEW201 *

IEB M8 x 1 Housing 40 mm

6 mm non-flush Mountable

Use M8 sensors only if space is an issue and cannot fit preferred types with M12 connectors!

IFW204 IFK M12 x 1


Correction Factor 1

Long

Housing

IGW202

IGK M18 x 1 Housing 65 mm


IIW202 IIK M30 x 1.5


IFW200

IFK M12 x 1 Housing 65 mm


IFW201



IGW200



IGW201




Housing 65 mm



Housing 65 mm 22 mm non-flush

Mountable






https://www.ifm.com/gb/en/product/IEW200

https://www.ifm.com/gb/en/product/IEW201

https://www.ifm.com/gb/en/product/IFW204

https://www.ifm.com/gb/en/product/IGW202

https://www.ifm.com/gb/en/product/IIW202















A:3 Proximity Sensors Type IMC & IDC (Weld Field Immune) – K Factor 1

Sensors to detect aluminium or steel targets

Rectangular type with M12 plug – body safe coated


IM5119

IMC

40 x 40 x 66 mm



Correction Factor 1

IM5120 35 mm non-flush

Mountable


Mountable

IM5124 20 mm flush Mountable

DC PNP Complementary


Mountable


Mountable

ID5059 IDC

80 x 40 x 112 mm



Over-flush Mountable






https://www.ifm.com/gb/en/product/IM5119






https://www.ifm.com/gb/en/product/ID5059









A:4 Proximity Sensors Cylindrical for detection of steel targets where longer sensing is required

All types with M12 plug

Use wherever possible flush mountable items only!


IE5312




IE5288



IFS208



Optical setting Aid (2 LED)

IFS209



IGS208 IGK M18 x 1


IGS209 IGK M18 x 1


Mountable

IIS206 IIK M30 x 1.5


IIS207 IIK M30 x 1.5


Mountable






https://www.ifm.com/gb/en/product/IE5312

https://www.ifm.com/gb/en/product/IE5288

https://www.ifm.com/gb/en/product/IFS208

https://www.ifm.com/gb/en/product/IFS209

https://www.ifm.com/gb/en/product/IGS208

https://www.ifm.com/gb/en/product/IGS209

https://www.ifm.com/gb/en/product/IIS206

https://www.ifm.com/gb/en/product/IIS207









A:5 Proximity Sensors Rectangular for detection of steel targets where longer sensing is required

All types with M12 plug


IM5128

IMC 40 x 40 x 66 mm



Correction Factor 1


Mountable


Mountable

IM5132 20 mm flush Mountable



Mountable


Mountable

ID5055

IDC 80 x 40 x 112 mm



Over-flush Mountable

ID5058 DC PNP

Complementary












http://www.ifm.com/products/gb/ds/ID5055.htm

http://www.ifm.com/products/gb/ds/ID5058.htm









A:6 Proximity Sensors “K0 aluminium immune” for detection of metal studs & nuts in aluminium

Cylindrical types with M12 plug


IFC263


2.5 mm flush Mountable


Full metal Housing

IGC249 IGK M18 x 1

Housing 70 mm 4.5 mm flush Mountable






https://www.ifm.com/gb/en/product/IFC263

https://www.ifm.com/gb/en/product/IGC249









B:1 Proximity Sensor Brackets for M8/M12/M18/M30 & IDC/IMC

Mounting brackets and plates

Design ifm

article Type

Dimensions [mm]

Material Accessories Comments

E10849 For types M8 x 1 M12 x 1

Length: 42

Brass nickel-plated

2 nuts Brass

Nickel-plated

Fixing Mounting Sleeves

With end

stop


Length: 45

E10742 For types M18 x 1 M24 x 1.5 Length: 58

E10743 For types M30 x 1.5 M36 x 1.5 Length: 58


Length: 32


Length: 34

E10807 For types M18 x 1 M24 x 1.5 Length: 36

E10808 For types M30 x 1.5 M36 x 1.5 Length: 36

E12587 For sensor M8 x 1

IEW200 M12 x 1

Length: 28 Brass anti-

spatter

Use in welding areas

2 nuts Brass anti-

spatter

E12452 For sensor M12 x 1

IFW200 / IFW204 M16 x 1

Length: 33.5

E12453 For sensor M18 x 1 IGW200 / IGW202

M22 x 1 Length: 33.5

E12454 For sensor M30 x 1.5

IIW200 / IIW202 M36 x 1.5

Length: 33.5

E10734 For types M8 x 1 25 x 33 x 23

Stainless steel (1.4301 / 304)

2 lock washers (Steel galvanised)

Angle brackets

E10735 For types M12 x 1 32 x 36 x 23

E10736 For types M18 x 1 42 x 48 x28

E10737 For types M30 x 1.5 58 x 58 x 28

Design ifm article Type Material Accessories Comments

E10730 For types IDC Stainless steel (1.4305 / 303)

- With integrated

Snap-on rail

E12106 For types IMC Stainless steel 2 socket head screws

2 washers






https://www.ifm.com/gb/en/product/E10849


























C:1 Photocells Type OG

Threaded OG housing M18 x 1; Metal; DC PNP; M12 connector; Red light 624 nm

Design ifm article Type Range Output Comments

OGH500 Diffuse background

Suppression 15...300 mm

Light-on / dark-on Programmable via

Pushbutton

Factory setting Light-on mode

OGT500 Diffuse standard 2…800 mm Light-on / dark-on Programmable via

Pushbutton

Factory setting Light-on mode

OGP500 Retro-reflective, Polarisation filter

0.03…5 m Light-on / dark-on Programmable via

Pushbutton

Factory setting Dark-on mode

OGS500 Through beam

Transmitter 25 m

OGE500 Through beam Receiver 25 m adjustable

Light-on / dark-on Programmable via

Pushbutton







https://www.ifm.com/gb/en/product/OGH500

https://www.ifm.com/gb/en/product/OGT500

https://www.ifm.com/gb/en/product/OGP500

https://www.ifm.com/gb/en/product/OGS500

https://www.ifm.com/gb/en/product/OGE500









C:2 Photocells Type O5

Rectangular O5 housing; Plastics; DC PNP; M12 connector; Red light 624 nm


O5H500 Diffuse reflection

Background suppression

50…1800 mm Light-on / dark-on

Programmable

O5P500 Retro-reflective, Polarisation filter

0.075…10 m Light-on / dark-on

Programmable Via pushbutton

O5S500 Through beam

Transmitter up to 25 m

O5E500 Through beam

Receiver up to 25 m

Light-on / dark-on Programmable

Via pushbutton






https://www.ifm.com/gb/en/product/O5H500

https://www.ifm.com/gb/en/product/O5P500

https://www.ifm.com/gb/en/product/O5S500

https://www.ifm.com/gb/en/product/O5E500









C:3 Photocells Type O6

Rectangular O6 housing; Metal; DC PNP; M8 connector; Red light 633 nm Use only if space is an issue and cannot fit preferred types with M12 connectors above!


O6H302 Diffuse reflection

Background Suppression

2…200 mm

Light-on / dark-on Selectable

O6P302 Retro-reflective, Polarisation filter

0.05…5 m
















C:4 Rectangular OJ housing; Plastics; DC PNP; M8 connector; Red light 660 nm

Use only if space is an issue and cannot fit preferred types with M12 connectors above!


OJ5100 Diffuse reflection 1…600 mm Light-on / dark-on

Programmable Front sensing

OJ5122 Diffuse reflection 1…600 mm Light-on / dark-on

Programmable Side sensing

OJ5104 Retro-reflective, Polarisation filter

0…2 m Light-on / dark-on


OJ5126 Retro-reflective, Polarisation filter

0…2 m Light-on / dark-on


OJ5130 Through beam

Transmitter Up to 10 m Side sensing

OJ5131 Through beam

Receiver Up to 10 m


Side sensing

OJ5148 Diffuse reflection

Background suppression 15…400 mm


Side sensing


Background suppression 15…400 mm


Front sensing






https://www.ifm.com/gb/en/product/OJ5100
















D:1 Photocells Laser Distance Type O1D, O5D, OGD & OID – Time-Of-Flight Principle

O1D / O5D / OGD / OID Types, DC PNP; M12 connector; Visible Laser Light 650 nm


O1D Metal

59 x 42 x 52

O1D100 Photoelectric

Distance Sensor, Laser Class 2

0.2…10 m Application: 0…19 m

OUT1: NO/NC pr. OUT2: NO/NC pr.

Or analogue Baffle detection Over 2 m



0.2…10 m Background suppression

>10…100 m NO/NC programmable



0.2…3.5 m Background suppression

>3.5…4 m OUT1: NO/NC pr. OUT2: NO/NC pr.

Or analogue

Detection of Shiny black

Surfaces



0.3…6 m Background suppression

>6…100 m

O5D Plastic

56 x 47 x 18


Distance Sensor, Laser Class 2 0.03…2 m

Background suppression …20 m

Complementary

Baffle detection Between

.3 and 2 m



OGD 61.7 x 22.5 x 45.2

Metal

OGD580 Photoelectric

Distance sensor, Laser Class 1

0.025...1.5 m Background suppression

0.03…20 m

OUT1: NO/NC OUT2: NO/NC

Parameterisable Long Range

OGD592 Photoelectric


0.03...0.3 m Background suppression

0.03…19.2 m

OUT1: NO/NC OUT2: NO/NC

Parameterisable Precision

M30 x 1.5

Threaded housing; Metal

OID200 Photoelectric

Distance sensor, Laser Class 2 0.03…2 m

Background suppression …20 m

Complementary

Baffle detection Between

.3 and 2 m

OID250 Photoelectric







https://www.ifm.com/gb/en/product/O1D100






https://www.ifm.com/gb/en/product/OGD580

https://www.ifm.com/gb/en/product/OGD592

https://www.ifm.com/gb/en/product/OID200

https://www.ifm.com/gb/en/product/OID250









D:2 Photocell Laser Light Type OG (M18) & O5 (Rectangular)

OG - M18 x 1 Threaded Housing; Metal; Visible Laser Light 655 nm

O5 - Rectangular housing; Plastics; DC PNP; M12 connector; Visible Laser Light 655 nm


OGH700

Diffuse reflection, Laser Class 1

20…200 mm Light-on / dark-on Programmable via

Pushbutton


OGP700

Retro-reflective, Laser Class 1

0.2…15 m

OGS700 Through-beam

Transmitter Laser Class 1

60 m

OGS701 2 m

OGE700 Through-beam

Receiver Laser Class 1

60 m adjustable Light-on / dark-on Programmable via

Pushbutton


OGE701 20 m adjustable

O5 Plastic

56 x 47 x 18

O5P700 Retro-reflective Laser Class 1

15 m Adjustable

Background suppression Light-on / dark-on Programmable via

Pushbutton

Use e. g. in Turn Tables

O5H700 Updated

Diffuse reflection Laser Class 1

20…200 mm Adjustable

Positioning of Robots






https://www.ifm.com/gb/en/product/OGH700

https://www.ifm.com/gb/en/product/OGP700















D:3 Rectangular OJ housing; Plastics; DC PNP; M8 connector; Visible Laser Light 650 nm

Use only if space is an issue and cannot fit preferred types with M12 connectors above!


OJ5114 Retro-reflective with

Polarisation filter; Laser Class 1

8 m adjustable Light-on / dark-on


OJ5116 Through-beam

Transmitter Laser class 1

15 m Front sensing

OJ5117 Through-beam

Receiver Laser class 1



OJ5136 Retro-reflective with

Polarisation filter; Laser Class 1



OJ5138 Through-beam

Transmitter Laser class 1

15 m Side sensing

OJ5139 Through-beam

Receiver Laser class 1




Laser class 1 15…200 mm Adjustable


Front sensing


Laser class 1 15…200 mm Adjustable


Side sensing






















E:1 Fork & Angle Sensors Type OPU & OPL

DC PNP - Connection with M8 3 pole connector

DC PNP - Connection with M8 3 pole connector


OPU201

Optical fork Sensor

Width 20 mm Depth 25 mm

Light-on/dark-on Mode selectable

Red light

OPU202 Width 30 mm Depth 35 mm





OPL200

Optical angle Sensor

Side length x 50 mm Side length y 50 mm

Width z 60 mm Light-on/dark-on Mode selectable

Red light

OPL201 Side length x 80 mm Side length y 80 mm

Width z 100 mm






https://www.ifm.com/gb/en/product/OPU201





https://www.ifm.com/gb/en/product/OPL200

https://www.ifm.com/gb/en/product/OPL201









F:1 Photocells Accessories - Mounting brackets and clamps

Design ifm article Type Material / Accessories Comments

E11048 Mounting clamp Ø 18 mm

For sensors M18 PC

With end stop For types M18

E10736

Angle bracket for Sensors M18

Stainless steel (1.4301 / 304) 2 lock washers (Steel galvanised)

E20974

Swivel-mount clip System component

Diecast zinc OJ ball

E21095 For types OJ side lens Clamp: diecast zinc;

Fixture: Stainless Steel 316Ti/1.4571 Srew; M4 x 12; Nut; M4

Rod mounting Ø 10 mm

E20975 Fixture for mounting and

Fine adjustment of OJ laser units

Diecast zinc

Front lense

E20976 Side lense

E20984 Protection for OJ High-grade Stainless steel

E2D101 O1 mounting set

Fixture: stainless steel (304S15); Clamp: stainless steel (316C);

Screws: stainless steel; nut: high-grade Stainless Steel; 2 socket head screws M4 x 45


E21083 O5 mounting bracket rod

Head cap screw: 1 x M10 x 120 Nuts: 2 x M10; washers: 2

C ylinder screws: 2 x M5 x 8


E21087 O5 standard bracket Stainless steel 316Ti / 1.4571 // 2 cylinder head screw;

M5 x 28; 2 Nuts; 2 washers

E21142 O5 protective bracket Fixture: stainless steel 316Ti / 1.4571;

Clamp: Stainless steel (316C) Rod mounting

Ø 14 mm

E20915 Mounting set for reflectors Screw: 1 x M12 x 120 Screw: 1 x M4 x 12 Screw: 1 x M5 x 16

Clamp mounting Ø 80 mm













https://www.ifm.com/gb/en/product/E2D101













F:2 Photocells Accessories - Prismatic reflectors

Design ifm article Type Material / Accessories / Comments

E20005 Ø 80 mm Plastics / For red light and infrared light retro-reflective sensors

E20722 48 x 48 mm Plastics / For retro-reflective laser sensors and glass and film detection

E20452 45 x 28 mm Plastics / For red light and infrared light retro-reflective sensors

E20851 Ø 40 mm Push-fit fastener; for red light and Infrared light retro-reflective sensors


















G:1 Ultrasonic position sensors M18 / M18 Cube

Object detection for long ranges and difficult surfaces

The vibrating sound transducer reduces the deposit of dirt Retro-reflective operation for orientation-independent object detection

High-grade stainless steel housings LEDs for status indication (yellow) and echo (green)

Design ifm article Type Sensing range Output Setting

M18 x 1 x 60

M12 connector

UGT500

Diffuse-reflection

300 mm (max.)

3 wire DC PNP Wire UGT503 800 mm (max.)

UGT506 1200 mm (max.)

M18 Cube 53 x 20 x 38

M12 connector

UGT580 300 mm (max.)

4 wire DC PNP

+

Analogue 4…20 mA

Push button

UGT582 800 mm (max.)

UGT584 1200 mm (max.)

M18 x 1 x 98

M12 connector

UGT509 1600 mm (max.) 5 wire DC PNP

2 x OUT UGT512 2200 mm (max.)

UGT510 1600 mm (max.) 5 wire DC PNP +

Analogue 4…20 mA UGT513 2200 mm (max.)

UGR500

Retro-reflective

1600 mm (max.)

4 wire DC PNP

UGR501 2200 mm (max.)






https://www.ifm.com/gb/en/product/UGT500










https://www.ifm.com/gb/en/product/UGR500

https://www.ifm.com/gb/en/product/UGR501









H:1 Capacitive Proximity Sensors – For non-metallic part detection – short range


KF5001

KFA M18 x 1 x 60

4 mm Adjustable 1...6 mm

Flush mountable PNP

Normally open

Stainless steel 316L / 1.4404;

PEEK (polyether ether

ketone)

KF5002 KFA

M18 x 1 x 61

8 mm Adjustable 3...12 mm Non-flush mountable

KG5066

KG M30 x 1.5 x 87

12 mm Non-flush mountable

PNP normally Open / closed Programmable

Housing: PBT; Connector: PC; Buttons: TPE-U

KI5085 KIA

M30 x 1.5 x 90 8 mm

Flush mountable Housing:


Buttons: TPE-U; Cover: PBT;

Connector: PEI

KI5087 KIA

M30 x 1.5 x 90 15 mm

Non-flush mountable






https://www.ifm.com/gb/en/product/KF5001

https://www.ifm.com/gb/en/product/KF5002

https://www.ifm.com/gb/en/product/KG5066

https://www.ifm.com/gb/en/product/KI5085

https://www.ifm.com/gb/en/product/KI5087









I:1 Update: Sensor Mounting System For Types Inductive & Photocell - M12/M18/M30, IME & IMC


E20860 Mounting set for

Sensors M12 Clamp mounting

Fixture: Stainless steel 316Ti / 1.4571;

Clamp: diecast zinc

Screw; M8 x 40

Free-standing M8

Type 1



Free-standing M8

Type 2



Clamp: diecast zinc; Fixture: steel

Head cap screw; M10 x 45;

Nut: M10; washer

Free-standing M10

Type 1



Head cap screw; M10 x 45

Free-standing M10

Type 2



Screw; M12 x 55 Free-standing

M12 Type 1


Sensors IME, IMC Clamp mounting

Clamp: Stainless steel

(1.4408); Fixture:

Stainless steel 1.4571 / 316Ti

Only for flush-Mountable Sensors

IME and IMC

Straight Rod mounting

Ø 14 mm


Sensors IME, IMC Clamp mounting

E20844 Updated

Mounting set for Position sensors Clamp mounting

Clamp: Stainless steel 1.4571 / 316Ti

Head cap screw; M8 x 80;

2 washers & nuts

Free-standing M8

E21109 Updated

System Component Clamp bolt


(1.4408)


E21110 Updated

System Component Clamp bolt


(1.4408)














https://www.ifm.com/de/en/product/E20844











I:2 Sensor Mounting System Photocell For Types OJ & O5 & OGD & Ultrasonic UG


E21095 Mounting set OJ

For side lens

Clamp: diecast zinc; Fixture: Stainless steel

316Ti / 1.4571

Screw; M4 x 12; Nut; M4


E21052 Basic clip OJ Diecast zinc For screws M4

E21211 Standard

Mounting set O5 Clamp mounting

Stainless steel 316Ti / 1.4571;

Clamp: diecast zinc

2 cylinder head screw; M5 x 8


E21210 Protection


Stainless steel 316Ti / 1.4571;

Clamp: diecast zinc


E21142 Protection


Fixture: stainless steel 316Ti / 1.4571 ; Clamp: Stainless steel (1.4408)

Rod mounting

Ø 14 mm

E20720 Mounting set 1

Clamp mounting Ø 18.5 mm Clamp: diecast zinc;

Fixture: steel


E20721 Mounting set 2

Clamp mounting Ø 18.5 mm

E21206 Mounting set


Clamp: high-grade Stainless steel;

Fixture: high-grade Stainless steel


E21207 Mounting set
























I:3 Sensor Mounting System - Rods

Design ifm article Type Material Comments

E20938 Mounting rod

Ø 12 / M10 mm

Stainless steel 316Ti / 1.4571

Straight Length: 130 mm

E20940 Mounting rod

Ø 12 / M10 mm Angled

Length: 200 mm

E20939 Mounting rod

Ø 14 / M12 mm Straight

Length: 130 mm

E20941 Mounting rod

Ø 14 / M12 mm Angled

Length: 200 mm

E20951 Cube M10 Diecast zinc

Mounting with aluminium profile



















Cable Supply from ifm

J:1 Connection Technology - Jumper M12 plug straight / M12 socket straight 4 x 0.34 mm² (42 x Ø 0.1 mm); Ø 4.9 mm - All cables have 30 mm ID tags Not irradiated (can be recycled), halogen-free, resistant to welding sparks

5 x 0.34 mm² (42 x Ø 0.1 mm); Ø 5.1 mm - All cables have 30 mm ID tags Not irradiated (can be recycled), halogen-free, resistant to welding sparks

Design ifm article Description

EVW037 Jumper Cable M12 4 Pole Straight Female to Straight Male 0.3 m grey PUR


EVW024 Jumper Cable M12 4 Pole Straight Female to Straight Male 1 m grey PUR



















https://www.ifm.com/gb/en/product/EVW037
























J:2 Connection Technology - Jumper M12 plug straight / M12 socket angled




EVW036 Jumper Cable M12 4 Pole Angled Female to Straight Male 0.3 m grey PUR


EVW030 Jumper Cable M12 4 Pole Angled Female to Straight Male 1 m grey PUR











































J:3 Connection Technology - T-Splitter M12 / 2 x M12


EBC113

T splitter 4 pole M12 / 4 pole M12

2 inputs / 1 output – no LED

EBC114



E11627








https://www.ifm.com/gb/en/product/EBC113

https://www.ifm.com/gb/en/product/EBC114










Cable Supply from ifm J:4 Connection Technology - Jumper M12 plug straight / valve socket type B angled

3 x 0.5 mm² (42 x Ø 0.1 mm); Ø 5 mm - All cables have ID tag for labelling Halogen-free, valve plug contacts: nickel-plated brass, with protection circuit


E11421 Jumper Cable M12 3 Pole Straight Male to Angled Valve 0.3 m black PUR

E11422 Jumper Cable M12 3 Pole Straight Male to Angled Valve 0.6 m black PUR

E11423 Jumper Cable M12 3 Pole Straight Male to Angled Valve 1 m black PUR






















J:5 Connection Technology - Jumper M12 plug straight / M8 socket angled

4 x 0.34 mm² (42 x Ø 0.1 mm); Ø 4.3 mm; halogen-free


EVC235 Jumper Cable M12 4 Pole Straight Male to M8 4 pole Angled Female 0.3 m black PUR

EVC236 Jumper Cable M12 4 Pole Straight Male to M8 4 pole Angled Female 0.6 m black PUR

EVC237 Jumper Cable M12 4 Pole Straight Male to M8 4 pole Angled Female 1 m black PUR








https://www.ifm.com/gb/en/product/EVC235














J:6 Connection Technology - Jumper M12 plug straight / M8 socket straight

3 x 0.25 mm² (32 x Ø 0.1 mm); Ø 4.5 mm Not irradiated (can be recycled), halogen-free, resistant to welding sparks



EVW076 Jumper Cable M12 3 Pole Straight Male to M8 3 pole Straight Female 0.3 m grey PUR


EVW078 Jumper Cable M12 3 Pole Straight Male to M8 3 pole Straight Female 1 m grey PUR
































Cable Supply from ifm J:7 Connection Technology - Jumper M12 plug straight / M8 socket angled



EVW081 Jumper Cable M12 3 Pole Straight Male to M8 3 pole Angled Female 0.3 m grey PUR


EVW083 Jumper Cable M12 3 Pole Straight Male to M8 3 pole Angled Female 1 m grey PUR




















J:8 Updated - Connection Technology - Socket M12 angled & straight

4 x 0.34 mm² (42 x Ø 0.1 mm); Ø 4.9 mm Not irradiated (can be recycled), halogen-free, resistant to welding sparks Use only to connect sensors to connection boxes in assembly lines / e. g. roller-bed conveyors

Angled female

Straight female


EVW004 Socket M12 4 Pole Angled Female 2 m grey PUR




Design ifm article Description (correction)

EVW001 Socket M12 4 Pole Straight Female 2 m grey PUR

























K:1 Safety Proximity Sensors Type GF / GG / GI / GM & Relays G150xS

Design ifm article Type Enable zone Output Complies with the

requirements

GF711S M12 x 1 x 70

Fail-safe inductive

0.5...4 mm Non-flush Mountable

2 x OSSD (A1 and A2)

EN ISO 13849-1: 2015 Category 2 PL d IEC 61508: SIL 2

IEC 62061: SILcl 2

GG712S

M18 x 1 x 70.5 Fail-safe inductive

1...5 mm Flush

Mountable

GG711S

M18 x 1 x 70.5 Fail-safe inductive

1...8 mm Non-flush Mountable

GI712S

M30 x 1.5 x 70 Fail-safe inductive

1...10 mm Flush

Mountable

GI711S M30 x 1.5 x 70

Fail-safe inductive


GM701S

IMC 40 x 40 x 66 Fail-safe inductive


EN ISO 13849-1: 2015 Category 3 PL e IEC 61508: SIL 3

IEC 62061: SILcl 3 GM705S 4...20 mm Non-flush Mountable

E12528

Distance plate for mounting of GM701S and GM705S Use 2x spacer when mounting GM7 on metal ground

GG851S M18 x 1 x 86.5

Fail-safe inductive

> 10 mm Flush

Mountable

2 x OSSD (A1 and A2)

EN ISO 13849-1: 2015 Category 2 PL d IEC 61508: SIL 2

IEC 62061: SILcl 2

G1501S Safety relay Evaluation Systems

2 safety-related NO contacts (floating contacts);

1 signal output (positive switching)

EN ISO 13849-1: Category 4 PL e IEC 61508: SIL 3 EN 574: type IIIC

G1502S Safety relay Evaluation Systems

3 safety-related NO contacts (floating) Without delay; 2 non safety-related signal

Outputs without delay (1 x NO, 1 x NC, Floating contacts)

2 safety-related NO contacts (floating) with Switch-off delay; 1 signal output (positive switching) with delay

EN ISO 13849-1: Category 4 PL e IEC 61508: SIL 3 EN 574: type IIIC






https://www.ifm.com/gb/en/product/GF711S

https://www.ifm.com/gb/en/product/GG712S


https://www.ifm.com/gb/en/product/GI712S

https://www.ifm.com/gb/en/product/GI711S

https://www.ifm.com/gb/en/product/GM701S

https://www.ifm.com/gb/en/product/GM705S



https://www.ifm.com/gb/en/product/G1501S

https://www.ifm.com/gb/en/product/G1502S









L:1 Vision Sensors Type O2D & O2V KEY NOTE: ifm MUST be involved with all camera applications from design phase, for correct camera and lighting selection, through to install phase where ifm should be utilised to commission initial camera parameters. (Please ensure single point lesson is followed).

Design ifm article Type Field view size Output Comments

O2V120 Object

Inspection Max 640 x 480 mm 64 x 48 @ 200 mm

5 programmable Outputs

Infrared light 850 nm Ethernet TCP/IP

O2V122 Object


O2V124 Object


O2V100 Object


White light Ethernet TCP/IP

O2V102 Object


O2V104 Object


O2D220 Object

Recognition Max 640 x 480 mm 64 x 48 @ 200 mm

Infrared light 850 nm Ethernet TCP/IP

O2D222 Object


O2D224 Object


E2D110 Mounting set Fixture: stainless steel (1.4301 / S304);

Clamp: stainless steel (1.4408) Rod mounting Ø 12 mm

E21168 Glass Protective Pane

Housing: diecast zinc black Lens: float glass

42 mm x 57 mm x 4.9 mm

E2D200 Software User interface for O2D sensors

E2V100 Software User interface for O2V sensors






https://www.ifm.com/gb/en/product/O2V120












https://www.ifm.com/gb/en/product/E2V100









L:2 Vision Sensors Type O2D & O2V – Connecting Devices

Design ifm article Type Electrical connection Comments

E11231

Socket

PUR cable / 2 m; 8 x 0.25 mm²; Ø 6.2 mm; halogen-free

M12 8 poles angled E11232 PUR cable / 5 m; 8 x 0.25 mm²;

Ø 6.2 mm; halogen-free

E11806 PUR cable / 10 m; 8 x 0.25 mm²;

Ø 6.2 mm; halogen-free, screened

E11950 PUR cable / 2 m; 8 x 0.25 mm²;


M12 8 poles straight E11807 PUR cable / 5 m; 8 x 0.25 mm²;


E11311 PUR cable / 10 m; 8 x 0.25 mm²;


E11898

Jumper Ethernet

Cross-over Patch cable

PVC cable / 2 m; 4 x 0.38 mm²; Ø 6.2 mm

M12 plug / RJ45 plug Straight / straight

Programming

E12283 PVC cable / 5 m; 4 x 0.38 mm²;

Ø 6.2 mm

E12204 PVC cable / 10 m; 4 x 0.38 mm²;

Ø 6.2 mm

E12205 PVC cable / 20 m; 4 x 0.38 mm²;

Ø 6.2 mm

E21138

Jumper Ethernet

PVC cable / 2 m; 4 x 0.34 mm²; Gold-plated contacts, screened

M12 plug / M12 plug Straight / straight

E21139 PVC cable / 5 m; 4 x 0.34 mm²; Gold-plated contacts, screened

E21137 PVC cable / 10 m; 4 x 0.34 mm²; Gold-plated contacts, screened

E21140 Adapter Connector: 1 x M12 Angled




























L:3 Vision Sensors Type O2D & O2V - Illumination Units

Following articles are only available via our branch office in U.K. Please contact Paul Stansfield Tel: (44) 2082130000 email: [email protected] TPL - High Power Red Light LED - Operating temperature 0…40°C

Design ifm article Type Illumination Field Material Comments

O2D909 Cube

Transmitter 31 x 26 mm

Aluminium PMMA

Red light 630 nm

O2D917 Ring light Outside Ø 106 mm,

Inside Ø 66 mm Aluminium black Anodised / glass

Infrared light 875 nm External programmable

O2D922 Bar light 10 x 75 mm

Aluminium black Anodised / glass


O2D925 Bar light 10 x 150 mm Aluminium black Anodised / glass


Design ifm article Type Dimension Material Comments

E2G035 Spot bar

5 x red light LED

153 x 47 x 47 mm Colourless Anodized Aluminium

TPL-Vision EBAR5-630-17 Continuous or

Strobe according to wiring 24 VDC 4 pin M12 connector

E2G043 Ring light

12 x red light LED

Ø Int : 58 mm Ø Ext : 112 mm Width : 28 mm

Black anodized Aluminium

TPL-Vision HPRING-630-17 Continuous or


E2G047 Spot light

4 x red light LED

23 x 20 x 13 mm Black anodized

Aluminium

TPL-Vision TSPOT4-630-9 Continuous or


E2G071 Spot bar

15 x red light LED

403 x 47 x 47 mm Colourless Anodized Aluminium

TPL-Vision EBAR15-630-10 Continuous or


E2G049 Bracket for

E2G043

Mounting plate HPRING Version Mounting bracket to mount O2* sensors to

High Powered ring LED lightning unit type E2G***. For use with E2D110 and other adjustable mounting accessories.



















L:4 Vision Sensors Type O2D & O2V - Touch Panel PC KEY NOTE: Monitors should be implemented line side for all camera applications. Monitors should be housed in panels, which adhere to JLR specifications, and be mounted in postions close To operator load so that operator has clear view of PASS / FAIL reults. ifm recommend that up to 9 cameas maximum can be connected to one monitor panel.

ifm onsite service must be utilised for all camera application parameterisation. Please contact Paul Stansfield Tel: (44) 2082130000 email: [email protected] ZA0137 > On-site support service charge – Country specific pricing. Day rate support work for Object Recognition products. Includes post visit site report documentation. Does not include travel and accommodation expenses.

Design ifm article Type Designation Comments

E2D400 Touch Panel

PC

12.1" colour display Intel Atom CPU 1.6 GHz

2 Giga Byte RAM Windows 7 Embedded

The device ensures Configuration and monitoring

Of object recognition and Inspection sensors

E2D401 Mounting bracket

For wall mounting VESA standard 100 x 100 mm

For Touch Panel PC

E2D402 Mounting set For control cabinet mounting

E21140 Adapter Connector: 1 x M12 Angled

For connecting cables please look at section L:2



















M:1 Flow Sensors Type SM & SI

Design ifm article Material

Wetted parts Medium

Temperature Output Applications

G ½ flat seal

SM6000


PEEK (Polyether Ether ketone);

FKM

-10...60 °C

OUT1: normally open / closed Programmable or pulse

OUT2: normally open / closed Programmable or analogue

(4...20 mA / 0...10 V, scalable)

0.1…25 l/min Weld water

Conductive liquids

G ¾ flat seal

SM7000



FKM

-10...60 °C



(4...20 mA / 0...10 V, scalable)

0.2…50 l/min

Weld water

Conductive liquids

G1 flat seal

SM8000



FKM

-10...60 °C



(4...20 mA / 0...10 V, scalable)

0.2…100 l/min Weld water

Conductive liquids

Internal thread M18 x 1.5

For adapter

SI5000 Stainless steel 316L / 1.4404;

O-ring: FKM 8 x 1.5 gr 80° Shore A

-25...80 °C Normally open / closed

Programmable

30 bar -> Liquids and gases

SI5010 300 bar -> Coolants /

Oils on machines

E40104 Adapter

M18 x 1.5 - L18

Nut: stainless steel 316Ti / 1.4571; Adapter: stainless steel 316L / 1.4404;

O-ring: FKM 16 x 1.5 gr 70° Shore

For mounting in T-pieces

E40137 T-piece

M26 x 1.5 R¾ - R¾

Stainless steel 316Ti / 1.4571

For sensors and adapters With process connection

M26 x 1.5

Flow rate: 0...20 l/min






https://www.ifm.com/gb/en/product/SM6000



https://www.ifm.com/gb/en/product/SI5000

https://www.ifm.com/gb/en/product/SI5010











N:1 Flow Sensors Type SV

Design ifm article Material

Wetted parts Medium

Temperature Output Applications

DN8 G ½

SV4200

Stainless steel 316L / 1.4404; ETFE; PA 6T;

PPS; FKM

-10...90 °C

OUT1: normally open / closed Programmable or frequency

OUT2: normally open / closed Programmable or frequency

1…20 l/min Water, deionised water,

Cooling water

DN10 G ½

SV5200 2…40 l/min

Water, deionised water, Cooling water

DN8 G ½

SV4204

OUT1 = Analogue signal temperature

OUT2 =

Analogue signal flow

1…20 l/min Water, deionised water,

Cooling water

DN10 G ½

SV5204 2…40 l/min

Water, deionised water, Cooling water






https://www.ifm.com/gb/en/product/SV4200












O:1 Pressure Sensors Type PN7

2 outputs: OUT1 = switching output OUT2 = switching output // programmable

Design ifm article Measuring range Voltage Application Replacement for:

4-digit alphanumeric Display

Alternating indication Of red and green

G ¼ I

PN7070 0…400 bar

18…30 V DC Relative pressure

PN7000

PN7071 0...250 bar PN7001

PN7092 0...100 bar PN7002

PN7093 0…25 bar PN7003

PN7094 -1...10 bar PN7004

PN7096 0...2.5 bar PN7006

PN7097 0...1000 mbar PN7007

PN7099 -1000...1000 mbar PN7009



G ¼ A / M5 I

PN7570 0…400 bar PN7000 + E30007

PN7571 0...250 bar PN7001 + E30007

PN7592 0...100 bar PN7002 + E30007

PN7593 0…25 bar PN7003 + E30007

PN7594 -1...10 bar PN7004 + E30007

PN7596 0...2.5 bar PN7006 + E30007

PN7597 0...1000 mbar PN7007 + E30007

PN7599 -1000...1000 mbar PN7009 + E30007

E30420 Protection cover (Polypropylene homopolymer) for PN7xxx

E30143 Adapter G ¼ - G ¼ (stainless steel (1.4404 / 316L)); for use with PN70xx

Replaces E30007

E10193 Mounting clamp Ø 34 mm (PA) for use with PN7xxx






https://www.ifm.com/gb/en/product/PN7070



























O:2 Pressure Sensors Type PN2

2 outputs: OUT1 = switching output OUT2 = switching output or Analogue 4…20 mA / 0…10 V programmable

Design ifm article Measuring range Voltage Application Replacement for:



G ¼ I

PN2070 0…400 bar

18…30 V DC Relative pressure

PN2020

PN2071 0...250 bar PN2021

PN2092 0...100 bar PN2022

PN2093 0…25 bar PN2023

PN2094 -1...10 bar PN2024

PN2096 -0.125...2.5 bar PN2026

PN2097 -50...1000 mbar PN2027

PN2099 -1000...0 mbar PN2009



G ¼ A / M5 I

PN2570 0…400 bar PN2020 +E30007

PN2571 0...250 bar PN2021 +E30007

PN2592 0...100 bar PN2022 +E30007

PN2593 0…25 bar PN2023 +E30007

PN2594 -1...10 bar PN2024 +E30007

PN2596 -0.13...2.5 bar PN2026 +E30007

PN2597 -50...1000 mbar PN2027 +E30007

PN2599 -1000...0 mbar PN2029 +E30007

E30420 Protection cover (Polypropylene homopolymer) for PN2xxx

E30143 Adapter G ¼ - G ¼ (stainless steel (1.4404 / 316L)); for use with PN20xx

Replaces E30007

E10193 Mounting clamp Ø 34 mm (PA) for use with PN2xxx

































P:1 Combined Temperature Sensor Type TN

Design ifm article Type Material Use



TN7511

-50...150 °C 18…32 V DC

2 x normally open / closed Programmable

TN2511 1 x normally open / closed

Programmable + 1 x analogue (4...20 mA / 0...10 V, scalable)

Accessories


E40096 Adapter

M18 x 1.5 - G ½ Stainless steel (1.4404 / 316L)

Use G ½ T-piece

E40099 Adapter

M18 x 1.5 - G ¼ Use G ¼ T-piece

E40104 Adapter

M18 x 1.5 - L18

Nut: stainless steel (1.4571 / 316Ti);

Adapter: stainless steel (1.4404 / 316L);

O-ring: FKM 70 Shore A

Use QL18 T-piece

E40078

Progressive ring T-piece

Stainless steel (1.4571 / 316Ti)

QL 18-18-18 fitting Use with E40104

E40079 QL 22-18-22 fitting Use with E40104

E40080 QL 28-18-28 fitting Use with E40104






https://www.ifm.com/gb/en/product/TN7511

https://www.ifm.com/gb/en/product/TN2511















P:2 Separate Temperature Probe Type TT & Evaluation Unit Type TR

Accessories




TR7439 -100…600 °C

Factory setting:

-40…300 °C

18…32 V DC

2 x normally open / closed Programmable

TR2439 1 x normally open / closed

Programmable + 1 x analogue (4...20 mA / 0...10 V, scalable)

TT1050

-40…150 °C

PT1000

Probes for Connection to TR

Stainless steel (1.4404 / 316L)

Probe length 160 mm

TT2050 Probe length 260 mm




E35010

Thermowell Ø 10 mm - G ½l


Probe length 82 mm Use with TT1050

E35020 Probe length 182 mm

Use with TT2050


Use with TT3050


Use with TT5050

E30018 Clamp fitting

Ø 6/8/10 mm - G ½

Stainless steel (1.4305 / 303);

FKM For temperature sensors

E30017 Mounting set Stainless steel (1.4305 / 303)

For direct connection of temperature Sensors TT to control monitors TR






https://www.ifm.com/gb/en/product/TR7439

https://www.ifm.com/gb/en/product/TR2439

https://www.ifm.com/gb/en/product/TT1050


















Q:1 Compressed Air Meter Type SD Application: Compressed air

Design ifm article Process

Connection Measuring range Output Comments

SD2000

R2 (DN50)

3...700 m³/h

OUT1: flow monitoring (binary), Quantity meter (pulse), Preset counter (binary) OUT2: flow or temperature Monitoring (analogue or binary) OUT1: normally open / closed Programmable or pulse OUT2: normally open / closed Programmable or Analogue (4...20 mA scalable)

SD2500 2.5...700 m³/h

Follower of SD2000

SD9000

R1½ (DN40)

1.5...410 m³/h

SD9500 1.4...410 m³/h

Follower of SD9000

SD8000

R1 (DN25)

0.7...225 m³/h

SD8500 0.8...225 m³/h Follower of

SD8000

SD6000

R½ (DN15)

0.2...75 m³/h

SD6500 0.25...75 m³/h

Follower of SD6000

SD0523

G 1 I

See data sheet

Adjustable for Inside pipe Diameter

(38...254 mm)

SD1540 Follower of SD0523






https://www.ifm.com/gb/en/product/SD2000


















R:1 Level Sensors - Type LR

Design ifm article Type Sensing range Output Applications


LR7000

Electronic Level Sensor LR70

Guided Wave Radar

Probe length: L = 100...1600 mm

2 switching Outputs 2 x normally

Open / closed Programmable

Hydrous coolants, Oils,

Oil-based media, Water,

Media similar to water

LR8000


Guided Wave Radar

4 switching Outputs 4 x normally

Open / closed Programmable

LR3000


Guided Wave Radar

2 outputs OUT1 =

Switching output OUT2 =

Analogue output

Accessories

Design ifm article Designation Suitable for Material

E43225 Probe for level sensors LR, L=150 mm

LR30 LR70 LR80











E43202 Flange plate 65-80 / G ¾ Flange:

Stainless steel (1.4305 / 303)

E30009 Welding adapter G ¾ - Ø 50 mm

Process connection: D50 Welding adapter Device connection: G ¾







https://www.ifm.com/gb/en/product/LR7000























R:2 Level Sensors - Type LK

Design ifm article Type Sensing range Output Applications

7-segment LED display

LK7022

Electronic Level Sensor LK70

Capacitive

Probe length: L = 264 mm

2 switching Outputs

2 x normally Open / closed Programmable

Hydrous coolants Mineral oils

(dielectric constant < 3) Water, media similar to

Water Cannot be used for media

With separation layers (oil + water; oil/metal layer) Cannot be used for acids

And alkalis

LK7023 Probe length: L = 472 mm

LK7024 Probe length: L = 728 mm

Accessories

Design ifm article Designation Suitable for Material

E43006 Flange plate 65-80 D16

For capacitive level sensors LK70

Flange: aluminium anodised Lock nut: stainless steel

Spacer: brass Clamping ring: FKM

E43002 Welding adapter Ø 50 / D16 LK70

Flange: stainless steel Lock nut: stainless steel

Spacer: brass Clamping ring: FKM






https://www.ifm.com/gb/en/product/LK7022













Information on the version no.

Version-no. Date Comment

1.0 May 29, 2018 New version: “JLR Projects Standard Parts list” A:2 – Updated: New - IEW200, IEW201 B:1 – Updated: New - E10848, E10806, E10807, E10808, E12587, E12452, E12453, E12454, E12106 D:1 – Updated: New – OGD580, OGD592 I:2 – Updated: New – E21210 K:1 – Updated: New – E12528 O:1 – Updated: New – E30143 replaces E30007 O:2 – Updated: New – E30143 replaces E30007

1.1 June 26, 2018 Editorial work on the layout Add JLR contacts: Simon Jenkins, Ian Cowhig, Stuart Bailey F:1 – Updated: New – E20915, E21083

1.2 July 10,2018 Add JLR contact: Russell Beattie

1.3 September 10, 2018 K:1 – Updated: New – GF711S

1.4 March 1, 2019 D:1 – Move O5P700 to chapter D:2 D:2 – Updated: O5P700 -> New – O5H700 J:2 – Updated: New – EVW054, EVW055, EVW056, EVW057, EVW058, EVW059

1.5 April 15, 2019 I:1 – Updated -> New E20844, E21109, E21110

1.5.1 May 6, 2019 J:8 – Updated - Text correction in column “Straight Female”

1.6 December 13, 2021 JLR contacts and ifm contact information updated Q:1 Compressed Air Meter Type SD -> Follow-up article included






Standard Parts List

Documents

Transcript of Standard Parts List