Artel Climabox System Artel’s Climabox is a technical innovation because: n it is able to make the...

Artel Climabox System

Artel’s Climabox is a technical innovation because:

it is able to make the most of the two principal natural resources: gas and water

it allows the combination of the activities of a boiler with those of a condenser

What is the Climabox ?


Compressor

Gas/water heat exchanger

Microprocessor

Gas pipes

Water pipes


Climabox is composed of two main units

the standard condenser unit cools the gas R407c

with direct expansion

What is the Climabox?

The additional unit where the coolant changes from gas to water

The Climabox from on high

Water entrance Water exit

Plus: air/water exchanger Thanks to the large capacity, the

Climabox always guarantees a minimum water store

ideal for the combination with the microprocessor of new generation

Made of a particular antifreeze material to be able to work down to very low temperatures

anomalies in the temperature regulation do not disturb the exchange system

Plus: The microprocessor

Intelligent management of energy is

possible thanks to the use of amicroprocessor controlling the

activity of: the compressor (reduction in

the number of the start-ups) the fan

Reduction of consuption and noise

Plus:The Microprocessor

allows colder wather a thermal head of 7/8 degrees the limitation of the number of

start-ups of the compressor

The complete removal of the accumulation tank

The microprocessor allows the limitation of the number of start-ups of the compressor in a hour

• colder wather, or warmer in heating mode

• a thermal head of 7-8 degrees

• improve machine yield



The microprocessor simulates the operation of the accumulation tank

Without microprocessor and accumulation tank With microprocessor and without accumulation tank

Scroll Rotating

The compression occurs in a rotating manner with appropriate spirals which compress the gas.

•fewer moving parts, fewer vibrations, lower energetic consumption •Better performance, better reliability, lower noise

spirals and compression of gas

Principles of operation

water entrance Plant inlet-outlet

***ecologic: Climabox uses the same water inside, without any waste or the need to refill.

How to install the Climabox

The Climabox is ideal for connection to and interface with a common gas powered heating boiler

The use of a single convection system

The alternate use by the two units:

- in the summer for a drop in temperature only Climabox operates

- in winter Climabox or boiler can operate individually

or at the same time


The Climabox is suitable for two types of installation:

external: the two units are mounted together on the exterior of building


internal: only the condenser unit is mounted on the exterior of the building while the additional unit is installed inside.

The Climabox is ideal for the conditioning of different rooms

placed on different floors and at different distances

with high head pumps

Climabox destination

Maximum efficiency in presence of large height differences,

pressure losses and when used for multiple internal units.

The Climabox: the partners

The Climabox: the versatility

Versatility: a system able to be managed by a plumber

Versatility: a plant able to facilitate maintenance interventions by technical

Versatility: the use of easy-to-get components

The Climabox and the Competitors

Dimensions suppressed in the width in comparison to competitors to assure an easy installation and less obstacles

The Climabox is mass-product with a specific pressing (metal-die) that improve the performance in terms of power and the aesthetics ( to knock off the rough edges and the desing of supports)

Artel Climabox System Artel’s Climabox is a technical innovation because: n it is able to make the...

Documents

Transcript of Artel Climabox System Artel’s Climabox is a technical innovation because: n it is able to make the...