Robomart.comhttp://www.robomart.com/

PRODUCT NAME : Arm 7 Development Board

MODEL : RM0667

PRICE : Rs 0.00

SKU : RM0667

WEIGHT : 0

STOCK : Out Of Stock

MANUFACTURER : Robosapiens India

DIMENSIONS(LxWxH) : 0 x 0 x 0

DESCRIPTION

LPC2148 Pro Development Board is a powerful development platform based on LPC2148 ARM7TDMI microcontroller with 512Kon-chip memory. This board is powered by USB port and does not need external power supply. It is ideal for developing embeddedapplications involving high speed wireless communication (Zigbee / Bluetooth / WiFi), USB based data logging, real time datamonitoring and control, interactive control panels etc. The on-chip USB controller provides direct high speed interface to aPC/laptop with speeds up to 12Mb/s. The UART boot loader eliminates need of an additional programmer and allows you toprogram using serial port. The on board peripherals include SD/MMC card interface, USB2.0 interface, 4Kbit I2C EEPROM, Xbee /Bluetooth / WiFi wireless module interface, ULN2003 500mA current sinking driver, L293D DC motor controller, 16X2 characterLCD and many more. The on-chip peripherals and the external hardware on the development board are interconnected using pinheaders and jumpers. The I/O pins on the microcontroller can be accessed from a 50 pin male header. This direct access to I/Opins enables you to connect your own devices very easily to the processor. The board is made from double sided PTH PCB boardto provide extra strength to the connector joints for increased reliability.Specifications of these ARM Seven Development Board are as follows:

Microcontroller: LPC2148 with 512K on chip memoryCrystal for LPC2148: 12MhzCrystal for RTC: 32.768KHz50 pin Berg header for external interfacingOperating Supply: 9V to 12V DC/AC2.4GHz ZigBee (XBee) wireless module adaptor512 bytes of I2C external EEPROMUSB Type B ConnectorSD / MMC card holder10pin(2X5) FRC JTAG connector for flashing and debugging50 Pin Expansion header2x16 Character Alphanumeric LCDL293D 600mA Dual DC motor DriverULN2003 500mA driverDual RS232 UARTs for external communicationReal-Time Clock with Battery Holder2 Analog Potentiometers connected to ADC

1 / 3

Robomart.comhttp://www.robomart.com/

TSOP1738 IR receiver4 USER Switches4 USER LEDsReset and Boot loader switches3V button cell for on chip RTCON/OFF switchBuzzerSchematics and Application examples in KEIL provided in the documentation CD1-LPC2148 Pro Development Board1-USB Cable1-DB9 Serial CableA set of 10 1-1 cables1-Documentation CD

Specification

General Characteristics

Type Development Board

Product ID RM0667

Dimension (140 x 140) mm

Weight 200 gmControl Circuit

Controller LPC 2148

Clock Frequency 12 Mhz

Data Communication Serial / Parallel

Motor Driver On Board L293D Dual H Bridge Motor Driver Circuit

Sensor Interface Analog / Digital Sensors

Display On Board 16 x 2 LCD Interface , On Board 4 Bit LED

Parallel Interface 50 Programmable parallel I/O Line

Serial Interface 2 - RS232 Serial Communication

Programming Mode UART boot loader

Programming Interface UART boot loader

Softwares Required Keil uVision 4, Flash Magic

Input Devices Analog / Digital Sensor

External InterruptSource

External and Internal

ADD ONS (Other Peripheral Modules can be interfaced as per need)

IR based ProximitySensor

YES

IR Based Digital 5Sensor Array

YES

Sound Sensor YES (Using 3 Pin Jumper Wire)

Light Searching Sensor YES (Using 3 Pin Jumper Wire)

DTMF Decoder Module YES

8 Bit Digital Keypad YES

LM 35 TemperatureSensor

YES ( Using three single Pin Jumper Wire)

Ultrasonic Sensor YES

Gas Sensor Module YES

2 / 3

Robomart.comhttp://www.robomart.com/

ADXL 355Accelerometer

YES

7 Segment LED display YES

Motor Driver External Motor Driver Board like RM0019 , RM0024 , RM0030 , RM0032 ,RM0039

USB to TTL Converter YES ( Using 4 single Pin Jumper Wire)

GPS Adapter YES (Using 1 Single PIN jumper wire)

GSM SIM 300 / 900Modem

YES

Powered by TCPDF (www.tcpdf.org)

3 / 3