Advanced Lithography Soft lithography Imprint lithography SPM lithography 3D lithography.

13
Advanced Lithography Soft lithography Imprint lithography SPM lithography 3D lithography
  • date post

    18-Dec-2015
  • Category

    Documents

  • view

    301
  • download

    10

Transcript of Advanced Lithography Soft lithography Imprint lithography SPM lithography 3D lithography.

Page 1: Advanced Lithography Soft lithography Imprint lithography SPM lithography 3D lithography.

Advanced Lithography

• Soft lithography• Imprint lithography• SPM lithography • 3D lithography

Page 2: Advanced Lithography Soft lithography Imprint lithography SPM lithography 3D lithography.

Douglas B. Weibel, Willow R. DiLuzio and George M. WhitesidesNature Reviews Microbiology 5, 209-218 (March 2007)

Soft Lithography

Page 3: Advanced Lithography Soft lithography Imprint lithography SPM lithography 3D lithography.

Contact printing: Patterning of rounded surfaces

http://www.nanoterra.com/soft_lithography.asp

http://www.research.ibm.com/journal/rd/455/michel.html

Article from IBM J. Res. and Dev.

Page 4: Advanced Lithography Soft lithography Imprint lithography SPM lithography 3D lithography.

Organic single crystals on substrates patterned by microcontact printing. The printing uses PDMS stamps with relief features that are inked with a thick OTS film and then pressed onto the substrates. Patterned single-crystal arrays of different organic semiconductor materials.

ww

w.nature.com

Patterning organic single-crystal transistor arraysAlejandro L. Briseno, Stefan C. B. Mannsfeld, Mang M. Ling, Shuhong Liu, Ricky J. Tseng, Colin Reese,

Mark E. Roberts, Yang Yang, Fred Wudl and Zhenan Bao Nature 444, 913-917(14 December 2006)

OTS: octadecyltriethoxysilane

Page 5: Advanced Lithography Soft lithography Imprint lithography SPM lithography 3D lithography.

Douglas B. Weibel, Willow R. DiLuzio and George M. WhitesidesNature Reviews Microbiology 5, 209-218 (March 2007)

Soft Lithography

Page 6: Advanced Lithography Soft lithography Imprint lithography SPM lithography 3D lithography.

Micro-Transfer Molding

http://www.sciencedaily.com/releases/2006/06/060605081758.htm

http://www.ameslab.gov/final/News/Images/12-layer%20structure.jpg

3-D structures using TM

Page 7: Advanced Lithography Soft lithography Imprint lithography SPM lithography 3D lithography.

Nano-Imprint Lithography (NIL)

Hot embossing UV-curable

~20 nm holes

Imprint of sub-25 nm vias and trenches in polymersChou, S.Y. (Dept. of Electr. Eng., Minnesota Univ., Minneapolis, MN, USA); Krauss, P.R.; Renstrom, P.J. Source: Applied Physics Letters, v 67, n 21, 20 Nov. 1995, 3114-16

Page 8: Advanced Lithography Soft lithography Imprint lithography SPM lithography 3D lithography.

Nano-Imprint Lithography - UV curable

Patterned polyset epoxy siloxane using UV-NIL

http://news.rpi.edu/update.do?artcenterkey=2394

Page 9: Advanced Lithography Soft lithography Imprint lithography SPM lithography 3D lithography.

Fabrication of NIL template

Page 10: Advanced Lithography Soft lithography Imprint lithography SPM lithography 3D lithography.

AFM Lithography - Scratching

• Scratching– Tip is scanned over substrate with strong loading force, leaving behind trenches

– Direct patterning of substrate or patterning of resist

http://www.ntmdt.com/spm-principles/view/afm-lithography-scratching

http://www.asylumresearch.com/Gallery/3d/3d5.shtml

Scratch lithography on polycarbonateScratch lithography on blood cell

Page 11: Advanced Lithography Soft lithography Imprint lithography SPM lithography 3D lithography.

AFM Lithography - Dynamic Plowing

• Dynamic Plowing– Indenting of surface with vibrating tip

– Surface is machined in three dimensions www.veeco.com

Poem writtenn in PMMA using dynamic plowing. Storage capacity greater than a compact disk

Page 12: Advanced Lithography Soft lithography Imprint lithography SPM lithography 3D lithography.

AFM Lithography - Anodic Oxidation

• Anodic Oxidation– Applying voltage between tip and metallic

surface in wet environment

– Tip and the surface interact electrochemically as anode and cathode correspondingly.

– Oxide will grow on the point right under the tip

Local Anodic Oxidation (LAO) of perovskite oxides

http://www.lamia.infm.it/afm_anodic_oxidation.htm

AFM image of a Ti/TiOx barrier. The image shows the 70nm wide metallic wire(black), defined by AFM induced oxide, and the barrier.

http://www.nano.physik.uni-muenchen.de/

Page 13: Advanced Lithography Soft lithography Imprint lithography SPM lithography 3D lithography.

AFM Lithography - STM Lithography

• STM Lithography– Pulsing current causes sample to melt and evaporate under tip

http://www.ntmdt.com/spm-principles/view/afm-lithography-scratching

STM lithography on Langmuir-Blodgett film