A.

B.

C.

NOTE: Installation does not require you to climb on the roof. A step ladder may be used.

PREPPING FOR INSTALLATION:

1.

2.

3. Spread the cover from front to rear on top of the roof of your trailer

4.

5.

6.

INSTALLATION:

Identify the front of the cover.

Pull sides of cover down over your trailer.

Use the included cord and feed it through the front grommets and tighten and tie off.

Repeat step on the rear grommets.

Unroll the Trailer Cover adjacent to your trailer. Unwind the straps and buckles.

FOLDING TRAILERINSTALLATION INSTRUCTIONS

7. Attach the straps and buckles from side to side of the trailer and tighen for a snug �t.

FOLDING TRAILERINSTALLATION INSTRUCTIONS

Ensure that you have purchased the correct size cover for your Folding Trailer. Visit ADCOprod.com to review sizing. Measure your trailer from end to end including bumpers and spare tire, excluding hitch (where applicable). If you have any doubts, call ADCO at (800) 541-2326 to speak with customer service team.

29115 Avenue Valley View, Valencia CA 91355 | (800) 541-2326

Pad all sharp edges on the Folding Trailer, i.e. rain gutters, steps, or abrasive corners using foam or a pool noodle.

Clean your Folding Trailer thoroughly. Otherwise, you run the risk unsightly of black streaks.