A6V10097169_hq-en
Transcript of A6V10097169_hq-en
Security SystemsSiemens Building Technologies
SIPORT Enterprise R1 (SP1) Setup
Installation Manual
Data and design subject to change without notice. / Supply subject to availability. © 2008 Copyright by Siemens Building Technologies We reserve all rights in this document and in the subject thereof. By acceptance of the document the recipient acknowledges these rights and undertakes not to publish the document nor the subject thereof in full or in part, nor to make them available to any third party without our prior express written authorization, nor to use it for any purpose other than for which it was delivered to him.
3
Siemens Building Technologies Security Systems 03.2008
Contents Preface......................................................................................................................4 1 System Requirements ............................................................................6 2 Installation of SIPORT ............................................................................7 2.1 Installation of SIPORT Server...................................................................7 2.2 Installation of SIPORT Workstation ........................................................17 2.3 Installation of SIPORT VAS Standalone.................................................24 2.4 Installation of ELD (Electronic Locking Devices) ....................................24 2.4.1 Installation of software for PDA (Codic Card) .........................................24 2.4.2 Installation of XS-Manager (Dorma) .......................................................25 3 Configuration of SIPORT......................................................................29 3.1 User Management...................................................................................29 3.2 Hardware Parameterisation ....................................................................29 4 Update of SIPORT .................................................................................30 4.1 Update of SIPORT Server ......................................................................30 4.2 Update of SIPORT Workstation ..............................................................34 5 Deinstallation of SIPORT......................................................................38
Preface
4
Siemens Building Technologies Security Systems 03.2008
Preface
Exclusion of Warranty
We have checked the contents of the manual for compliance with the hardware and software components described. Certain differences can, however, not be excluded and we cannot guarantee full compliance in every detail. The information contained in this manual is reviewed regularly and necessary corrections and alterations are always included in subsequent editions. We welcome any suggestions for improvements.
Introduction
SIPORT is a powerful and flexible programmable control system for integrated building management.
It consists of the following main subsystems:
SIPORT Access Control / Time Recording
Access control / Time Recording
SIPORT Time Recording/SAP Time recording in conjunction with a higher-level SAP R/3 system SIPORT Configuration Configuration application for all SIPORT Modules SIPORT VAS ID card editing system SIPORT VAS CMM Mifare card management SIPORT Visit Visitor management SIPORT Display Presence display SIPORT Profile Management Extended access profile management SIPORT Host Interface CC1 Host interface to SAP R/3 via CC1 channel SIPORT Host Interface 2.0 Host interface to SAP R/3 via HR PDC SIPORT ODBC Import Flexible data import interface SIPORT Query Flexible data evaluation module
Separate documentation is available for each subsystem.
When an interface to another subsystem is described, reference is made to the operator manual for the relevant software package (e.g. Operator Manual for the SIPORT Host interface).
Preface
5
Siemens Building Technologies Security Systems 03.2008
About this manual
This manual describes the installation of the access control system SIPORT Access and the time recording system SIPORT Time Recording. By default, the manual refers to SIPORT Access. The same applies to SIPORT Time Recording.
Conventions
To aid understanding, a number of typographic conventions are used in this manual: Bold font Is used to show the names of buttons, toolbars, menus, commands and
windows. Example: "Please click OK in the Save dialog."
Italic font Is used for the names of windows and dialogs. Example: "Please click OK in the Save dialog."
+
Indicates keys on the keyboard. These characters describe an action performed by keyboard. Keys connected with a "+" must be pressed at the same time. Example:
"Press + on the keyboard."
System Requirements
6
Siemens Building Technologies Security Systems 03.2008
1 System Requirements
SIPORT Access server
32-Bit 64-Bit Operating system Windows XP Professional (SP2)
(Attention: only with MSDE Data base), Windows 2000 Server (SP4) (only EN), Windows 2003 Server R2 TCP/IP network protocol installed
Windows 2003 Server R2 ) (only EN)
CPU (Processor) Pentium IV, 3 GHz (Dualcore or Xeon recommended)
Pentium IV, 3 GHz (Dualcore or Xeon recommended) EMT64T required
Data base MSSQL Server 2000 (SP4), Microsoft MSDE (SP3a), MS SQL Server 2005
MS SQL Server 2005 64-Bit
Memory Min. 1 GB (2 GB recommended) Min. 2 GB (4 GB recommended) Hard disk capacity Min. 80 GB Min. 80 GB Graphics device Standard graphics card Standard graphics card CD-ROM Yes Yes Interfaces 1 x serial RS232 COM port,
2 x USB port, altern. parallel port, Network connection (LAN)
1 x serial RS232 COM port, 2 x USB port, altern. parallel port, Network connection (LAN)
Monitor VGA Monitor (1024 x 768) (17 inch Monitor recommended)
VGA Monitor (1024 x 768) (17 inch Monitor recommended)
Pointing device Microsoft mouse or compatible pointing device
Microsoft mouse or compatible pointing device
Network 10/100 MBit/s 10/100 MBit/s
SIPORT Workstation
32-Bit 64-Bit Operating system Windows XP Professional (SP2),
Windows 2000 Server (SP4), TCP/IP network protocol installed
Windows XP Professional (SP2) (only EN)
CPU (Processor) Pentium IV, 3 GHz (Dualcore or Xeon recommended)
Pentium IV, 3 GHz (Dualcore or Xeon recommended) , EMT64T required
Memory Min. 1 GB Min. 2 GB Hard disk capacity Min. 1 GB Min. 1 GB Graphics device Standard graphics card Standard graphics card CD-ROM Yes Yes Interfaces 2 x serial RS232 COM port,
2 x USB port, altern. parallel port, Network connection (LAN)
2 x serial RS232 COM port, 2 x USB port, altern. parallel port, Network connection (LAN)
Monitor VGA Monitor (1024 x 768) (17 inch Monitor recommended)
VGA Monitor (1024 x 768) (17 inch Monitor recommended)
Pointing device Microsoft mouse or compatible pointing device
Microsoft mouse or compatible pointing device
Network 10/100 MBit/s 10/100 MBit/s
Installation of SIPORT
7
Siemens Building Technologies Security Systems 03.2008
2 Installation of SIPORT
Before you start
Make sure that your system meets the system requirements for the SIPORT software (see chapter 1 System Requirements).
Ensure that the software protection (dongle) supplied is plugged onto the parallel (printer) or USB port of your computer
If a printer is already connected, simply connect the dongle between the printer port and the printer cable. Make sure the TCP/IP network protocol is installed on your PC.
Close all Windows applications.
2.1 Installation of SIPORT Server
Proceed as follows: 1. Start Windows. 2. Insert the SIPORT installation CD into the CD-ROM drive.
The following window will appear:
If this window does not appear, select Run... in the Windows Start menu, select the setup.exe on the CD and click OK.
3. Specify the language in which SIPORT will be installed on click OK.
Installation of SIPORT
8
Siemens Building Technologies Security Systems 03.2008
The installation wizard, which will guide you through the installation of SIPORT, is now started. After a brief initialisation phase, the following window appears:
4. Click Next.
The following window will appear:
5. Select “SIPORT Access Server” and click Next.
Installation of SIPORT
9
Siemens Building Technologies Security Systems 03.2008
The following window will appear:
6. Select a folder where the setup files will be installed and click Next.
If no Acrobat Reader is installed on your system, the following window will appear:
You need the Acrobat Reader to display the help files which are integrated in the SIPORT software
7. If you want to install Acrobat Reader, click Yes, otherwise click No.
The following window will appear:
Installation of SIPORT
10
Siemens Building Technologies Security Systems 03.2008
8. Select the components to be installed.
SIPORT Access Access control / Time Recording Kernel Configuration Kernel Configuration SIPORT VAS Card creation system SIPORT VAS CMM Standard Mifare card management SIPORT Display Employee presence display SIPORT Visit Visitor management SIPORT ELD Electronic Locking Devices SIPORT Query List generator SIPORT Logging Service Service for data transfer from kernel to SIPORT SIPORT Queuing Service Service for the license checking and for the reading and writing
of online data from and to the kernel. SIPORT Kernel Download Service Service for data transfer from SIPORT to kernel SIPORT Personal Data Import Data import SIPORT Sap SyncSvc BAPI Service for data exchange with SAP through the BAPI channel SIPORT SAP SyncSvc CC1 Service for data exchange with SAP through the CC1 channel SIPORT Kernel Installs the background programs for communication with the
peripherals.
We recommend that you accept the default selection.
9. Click Next to continue.
The following window will appear:
10. Select a database type.
Installation of SIPORT
11
Siemens Building Technologies Security Systems 03.2008
The installation is now started. When the installation is complete, the following window will appear:
11. Click Finish.
The following window will appear:
12. Choose “Yes, I want to restart my computer now” and click OK.
Your computer will be restarted. After that the following window will appear:
13. Select your language and click Next.
Installation of SIPORT
12
Siemens Building Technologies Security Systems 03.2008
The following window will appear:
14. Select the name of the SQL server in the field Database server.
Database server Select the name of the SQL server Database name Enter the name of the database Option “Would you create the database? “ Choose if you want to create the database. Option “Generate only script” Choose if you want to generate a script for creating a
database.
15. Click Next.
The following window will appear:
16. Now select how you want to connect to the database.
In the field Database path, enter the location where the database will be created.
17. Click Next.
Installation of SIPORT
13
Siemens Building Technologies Security Systems 03.2008
The following window will appear:
18. Select a login mode (see following table).
SIPORT User administration is managed in SIPORT independently of the Windows operating system. Any default and user-defined user rights set up through the operating system or the domain are ignored.
Windows The user administration of the Windows operating system is used. The security restrictions for the operating system and the domain apply.
Check only the group membership
Only the group membership will be checked without password checking.
Smartcard Authentification You can login with your smart card. LDAP The user administration of a LDAP server is used. The security
restrictions for the operating system and the domain apply.
19. Click Next.
The following window will appear if you have chosen Windows. If you have chosen SIPORT or LDAP, go on reading at step 22.
Installation of SIPORT
14
Siemens Building Technologies Security Systems 03.2008
20. In the fields Domain and Server, enter where the user groups will be created. If the field Server is empty, the domain controller will be used.
In the field SIPORT groups, select which user groups are allowed to use the corresponding SIPORT applications. With the button Add, you can create new user groups.
21. Click Next.
The following window will appear:
22. Enter the passwords for the users.
If you don’t want to create these users, deselect the option Create default users.
23. Click Next.
The following window will appear:
24. Enter the data and click Next.
Installation of SIPORT
15
Siemens Building Technologies Security Systems 03.2008
A summary will appear:
25. Click Install.
When the installation is finished, the following message will appear:
26. Click OK.
Installation of SIPORT
16
Siemens Building Technologies Security Systems 03.2008
SIPORT Configuration will appear:
27. Select Database / Database update and click on the button Check. See also user manual SIPORT Configuration.
28. Exit SIPORT Configuration.
The installation is finished.
Installation of SIPORT
17
Siemens Building Technologies Security Systems 03.2008
2.2 Installation of SIPORT Workstation
To install a SIPORT workstation, proceed as follows. 1. Start Windows. 2. Insert the SIPORT installation CD into the CD-ROM drive.
The following window will appear:
If this window does not appear, select Run... in the Windows Start menu, select the setup.exe on the CD and click OK.
3. Specify the language in which SIPORT will be installed on and click OK.
The installation wizard, which will guide you through the installation of SIPORT, is now started.
After a brief initialisation phase, the SIPORT Welcome dialog appears:
4. Click Next.
Installation of SIPORT
18
Siemens Building Technologies Security Systems 03.2008
The following window will appear:
5. Select SIPORT Access Workstation and click Next.
The following window will appear:
6. Click Next.
If no Acrobat Reader is installed on your system, the following window will appear:
You need the Acrobat Reader to display the help files which are integrated in the SIPORT software
7. If you want to install Acrobat Reader, click Yes, otherwise click No.
Installation of SIPORT
19
Siemens Building Technologies Security Systems 03.2008
The following window will appear:
8. Select the components to be installed. SIPORT Access Access control / Time Recording Kernel Configuration Kernel Configuration SIPORT VAS Card creation system SIPORT VAS CMM Standard Mifare card management SIPORT Display Employee presence display SIPORT Visit Visitor management SIPORT Query List generator
The installation is now started. When the installation is complete, the following window will appear:
9. Click Finish.
Installation of SIPORT
20
Siemens Building Technologies Security Systems 03.2008
The following window will appear:
10. Choose “Yes, I want to restart my computer now” and click OK.
Your computer will be restarted now. After that the following window will appear:
11. Select your language and click Next.
The following window will appear:
12. Select the database server SIPORT_SERVER and click Next.
Installation of SIPORT
21
Siemens Building Technologies Security Systems 03.2008
The following window will appear:
13. Select the authentification mode and enter the user name and password of the database administrator.
14. Click Next.
The following window will appear:
The fields Client language and Kernel Path are only displayed if Kernel Configuration was chosen at
the setup.
15. Enter the data and click Next.
Installation of SIPORT
22
Siemens Building Technologies Security Systems 03.2008
A summary will appear:
16. Click Install.
When the installation is finished, the following message will appear:
17. Click OK.
Installation of SIPORT
23
Siemens Building Technologies Security Systems 03.2008
SIPORT Configuration will appear:
18. Take the presetting for your local operating station For further information see the user manual SIPORT Configuration.
19. Exit SIPORT Configuration.
The installation is finished.
Installation of SIPORT
24
Siemens Building Technologies Security Systems 03.2008
2.3 Installation of SIPORT VAS Standalone
To install SIPORT VAS stand alone, install SIPORT server and select only VAS and Queuing Service.
See section 2.1 Installation of SIPORT Server
2.4 Installation of ELD (Electronic Locking Devices)
This installation step will be performed only if the Electronic Locking Devices component was activated
during the installation of SIPORT. See section 2.1, step 8.
2.4.1 Installation of software for PDA (Codic Card)
The following window appears after the SIPORT installation:
1. Select your language and click Next.
The following window appears:
Installation of SIPORT
25
Siemens Building Technologies Security Systems 03.2008
2. Select a folder where the files will be stored and click Next.
The following window appears:
3. Enter your password and click Enter.
The following window appears:
4. Re-enter your password to confirm and click Enter.
The installation is finished.
2.4.2 Installation of XS-Manager (Dorma)
A prerequisite for installing XS Manager is that the PDA HotSync processes are fully installed (see the manual of your PDA). The PDA must be connected to the installation computer.
1. Click Next.
Installation of SIPORT
26
Siemens Building Technologies Security Systems 03.2008
The following window appears:
2. To install the XS-Manager you have to accept the license agreement. Click Yes.
The following window appears:
3. Select a folder where the files will be stored and click Next.
The XS-Manager will be installed.
Installation of SIPORT
27
Siemens Building Technologies Security Systems 03.2008
The following window appears:
4. Add the XS Manager files to be installed to a user account of your PDA’s Quick Install process and click OK. The files will be transferred to the PDA or to the memory extension card next time you HotSync.
The files to be transferred are displayed directly in the Quick Install dialogue:
5. Now start HotSync on your PDA. The HotSync process will transfer the XS Manager components to your PDA.
Installation of SIPORT
28
Siemens Building Technologies Security Systems 03.2008
The installation is finished. The following window appears:
6. Select Yes to restart your computer and click Finish.
Configuration of SIPORT
29
Siemens Building Technologies Security Systems 03.2008
3 Configuration of SIPORT
After a SIPORT application has been installed, the relevant configurations must be set and a database update must be made in SIPORT Configuration.
Please refer to the SIPORT Configuration user manual.
3.1 User Management
3 users are created during installation:
User name Password User 1 abc User 2 Admin_Access User 3 Admin_VAS
As entered during installation
Use these 3 users for your first login.
When you have finished configuring SIPORT, you can change or delete these user names.
The only exception is user Admin-Access, which can not be deleted. You can, however, rename it.
For further information see user manual SIPORT Access.
3.2 Hardware Parameterisation
Please refer to the following files on the installation CD: Content File Description of the XMP attributes *Attribute.pdf SIPORT Routines manual *Routines.pdf SIPORT Definition of the access control *W3ACPARM.pdf SIPORT Datapoints *W3POIN.pdf SIPORT Definition of the operation stations *W3PORT-Workstation.pdf SIPORT Definition of the MBOX8 and EBOX *W3PORT-MBOX8.pdf SIPORT Port administration *W3PORT-MBOX.pdf SIPORT Definition of the system printers *W3PORT-Printer.pdf SIPORT Routines editor *W3ROUT.pdf SIPORT System definition in general *W3SDEF.pdf SIPORT Fingerprint documentation *W3BIO1.pdf SIPORT ACX4x00 documentation *W3K32P.pdf SIPORT ACX4x00 Routines manual *K32-Routines.pdf SIPORT Parameterisation of the prestige reader *W3TM500P.pdf ACX4x00 Network installation *K32_Network-setup.pdf SIPORT Branch management *W3Port-Branch.pdf Reader TMC2450 installation *TMC2450.pdf
* G - German E - English F - French
Update of SIPORT
30
Siemens Building Technologies Security Systems 03.2008
4 Update of SIPORT 4.1 Update of SIPORT Server
Before updating:
Close all Windows applications.
Back up all your SIPORT data.
1. Start Windows. 2. Insert the SIPORT installation CD into the PC’s CD-ROM drive.
The following window will appear:
3. Select your language and click OK.
After a short initialization phase, the installation wizard will appear:
4. Click Next.
Update of SIPORT
31
Siemens Building Technologies Security Systems 03.2008
If no Acrobat Reader is installed on your system, the following window will appear:
You need the Acrobat Reader to display the help files which are integrated in the SIPORT software
5. If you want to install Acrobat Reader, click Yes, otherwise click No.
The following window will appear:
6. Select the features which you want to update and click Next.
The following window will appear:
7. Click Finish.
Update of SIPORT
32
Siemens Building Technologies Security Systems 03.2008
The following window will appear:
8. Choose “Yes, I want to restart my computer now” and click OK.
A restart is necessary for the rest of the update.
The computer is restarted. Log in. After that the following window will appear:
9. Select your language and click Next.
The following window will appear:
10. Enter the number of personals and profiles and click Next.
Update of SIPORT
33
Siemens Building Technologies Security Systems 03.2008
The following window will appear:
11. Click Install.
The installation process will start. When the process is finished the following window will appear:
12. Click OK.
Update of SIPORT
34
Siemens Building Technologies Security Systems 03.2008
4.2 Update of SIPORT Workstation
Before updating: Close all Windows applications. Back up all your SIPORT data
1. Start Windows. 2. Insert the SIPORT installation CD into the CD-ROM drive.
The following window will appear:
3. Select your language and click OK.
After a short initialization phase, the installation wizard will appear:
4. Click Next.
If no Acrobat Reader is installed on your system, the following window will appear:
You need the Acrobat Reader to display the help files which are integrated in the SIPORT software
Update of SIPORT
35
Siemens Building Technologies Security Systems 03.2008
5. If you want to install Acrobat Reader, click Yes, otherwise click No.
The following window will appear:
6. Select the features which you want to update and click Next.
The following window will appear:
7. Click Finish.
The following window will appear:
8. Select your language and click OK.
Update of SIPORT
36
Siemens Building Technologies Security Systems 03.2008
The following window will appear:
9. Select your database server and click Next.
The following window will appear:
10. Select the authentification mode, enter the user and password and click Next.
The following window will appear:
11. Enter the IP address of the server; select the client language and the kernel path. Then click Next.
Update of SIPORT
37
Siemens Building Technologies Security Systems 03.2008
A summary will appear:
12. Click Install.
SIPORT is now installing the update. After that the following window will appear:
13. Click OK.
Deinstallation of SIPORT
38
Siemens Building Technologies Security Systems 03.2008
5 Deinstallation of SIPORT
1. In the Windows Start menu, click Start / Control panel / Add or remove programs / SIPORT and click the button Change / Remove.
The following window will appear:
2. Select the option Remove and click Next.
The following window will appear:
3. Click Yes.
The following window will appear:
4. Select your language and click Next.
Deinstallation of SIPORT
39
Siemens Building Technologies Security Systems 03.2008
The following window will appear:
5. Enter the user name and password of the database administrator to remove the database.
6. Click Next.
The following window will appear:
7. Click Yes.
SIPORT will now configure your new software installation. After that the following window will appear:
8. Click Finish.
Deinstallation of SIPORT
40
Siemens Building Technologies Security Systems 03.2008
The following window will appear:
9. It is recommended to select “Yes, I want to restart my computer now“ and click OK.
SIPORT is removed.
Issued by Siemens Building Technologies Fire & Security Products GmbH & Co. oHG D-76181 Karlsruhe www.sbt.siemens.com
© 2008 Copyright bySiemens Building Technologies
Data and design subject to change without notice.Supply subject to availability.
Document no. A6V10097169 Edition 03.2008