95350 Ind. Selector Inside En
3
Loctite ® 243 ■ Medium Strength Threadlocker . ■ Can be used on ‘as received’ parts. ■ Resists vibration loosening. ■ Parts can be dismantled with normal hand tools. ■ Threads are completely sealed. 243 Application examples: General purpose threadlocking. Locking fasteners on pumps, motors, gearboxes, presses etc. at temperatures up to 150°C. T H R E A D L O C K I N G Loctite ® 2701 ■ High Strength Threadlocker. ■ Fast cure on plated parts. ■ Good resistance to hot oil. ■ Resists vibration loosening. ■ Threads are completely sealed. 2701 Application examples: Fasteners that do not need dismantling. Stud locking on all types of machinery e.g. engines, gearboxes, pumps, conveyors, vibrating screens etc. at temperatures up to 150°C. T H R E A D L O C K I N G Loctite ® 248 Stick ■ Medium Strength Threadlocker Stick. ■ Parts can be dismantled with normal hand tools. ■ Non drip. 248 STICK Application examples: General purpose threadlocking for use during maintenance. Particularly suitable for overhead applications. Locking fasteners on pumps, motors, gearboxes & compressors at temperatures up to 150°C. T H R E A D L O C K I N G Loctite ® 330 Multi Bond ■ Toughened Adhesive. ■ Two part no mix. ■ Good impact resistance. 330 MULTI BOND Application examples: Ideal for bonding a wide range of dissimilar substrates including metals, ceramics, wood, ferrite, masonry and some plastics. Suitable for gaps <0.5mm. S T R U C T U R A L B O N D I N G Loctite ® 3430 Epoxy ■ 5 Minute Epoxy. ■ Optically clear bond line. 3430 EPOXY Application examples: Bonds most substrates including metals, plastics, wood and glass. Ideal for bonding decorative panels, displays and for general repair. Suitable for use on parts with large gaps > 0.5mm. S T R U C T U R A L B O N D I N G Loctite ® 406 ■ Instant Adhesive. ■ Low viscosity. ■ Bonds in seconds. 406 Application examples: Ideal for bonding rubber and plastic. Bonds polyolefins e.g. polypropylene, polyethylene and thermoplastic rubbers when used with Polyolefin Primer 770. I N S T A N T B O N D I N G Loctite ® 435 ■ High resistance to impact and shock. ■ High peel strength. ■ Good humidity resistance. 435 Application examples: For bonding most substrates where parts are subjected to adverse conditions. Particularly suitable for bonding metal to other substrates. I N S T A N T B O N D I N G Loctite ® 454 ■ Instant Adhesive Gel. ■ General purpose. 454 Application examples: Gel consistency makes it ideal for vertical or overhead applications. Bonds most substrates including metals, plastics, wood, leather, cork and fabric. I N S T A N T B O N D I N G Industrial Products Selector Chart
description
guide
Transcript of 95350 Ind. Selector Inside En
-
Loctite 243 Medium Strength Threadlocker.
Can be used on as received parts.
Resists vibration loosening.
Parts can be dismantled with normal hand tools.
Threads are completely sealed.
243Application examples:General purpose threadlocking.Locking fasteners on pumps,motors, gearboxes, presses etc.at temperatures up to 150C.
THR
EAD
LOCK
ING
Loctite 2701 High Strength Threadlocker.
Fast cure on plated parts.
Good resistance to hot oil.
Resists vibration loosening.
Threads are completely sealed.
2701Application examples:Fasteners that do not need dismantling. Stud locking on alltypes of machinery e.g. engines,gearboxes, pumps, conveyors,vibrating screens etc. at temperatures up to 150C.TH
REA
DLO
CKIN
G
Loctite 248 Stick Medium Strength Threadlocker Stick.
Parts can be dismantled with normal hand tools.
Non drip.
248STICK
Application examples:General purpose threadlockingfor use during maintenance.Particularly suitable for overheadapplications. Locking fastenerson pumps, motors, gearboxes & compressors at temperaturesup to 150C.T
HR
EAD
LOCK
ING
Loctite 330 Multi Bond Toughened Adhesive.
Two part no mix.
Good impact resistance.
330MULTI BOND
Application examples:Ideal for bonding a wide rangeof dissimilar substrates includingmetals, ceramics, wood, ferrite,masonry and some plastics.Suitable for gaps 0.5mm.
STRU
CTUR
AL B
ONDI
NG
Loctite 406 Instant Adhesive.
Low viscosity.
Bonds in seconds.406
Application examples:Ideal for bonding rubber andplastic. Bonds polyolefins e.g. polypropylene, polyethyleneand thermoplastic rubbers whenused with Polyolefin Primer 770.
INST
ANT
BOND
ING
Loctite 435 High resistance to impact and shock.
High peel strength.
Good humidity resistance.435
Application examples:For bonding most substrateswhere parts are subjected toadverse conditions. Particularlysuitable for bonding metal toother substrates.
INST
ANT
BOND
ING
Loctite 454 Instant Adhesive Gel.
General purpose. 454Application examples:Gel consistency makes it ideal for vertical or overhead applications. Bonds most substrates including metals,plastics, wood, leather, cork and fabric.IN
STAN
T BO
NDIN
G
Loctite 542 Thread Sealant.
Fine threads. 542Application examples:Ideal for sealing hydraulicthreaded fittings and smallpneumatic fittings up to R 3/4''.Seals and locks in any positionallowing parts to be easilyaligned.TH
READ
SEA
LING
Loctite 577 Pipe Sealant.
Coarse threads.
Instant seal.577
Application examples:Suitable for sealing air line fittings, boiler fittings and anyother application using coarsemetal threaded fittings up toR 3''.TH
READ
SEA
LING
Loctite 55 Pipe Sealing Cord.
Allows fittings to be backed off for alignment.
Non curing.55
Application examples:For sealing metal and plasticthreaded pipe work and fittingscarrying hot or cold water. WRC listed. Meets BS 6920.Replaces PTFE tape, hemp and pastes. Suitable for use on threads up to R 4''.T
HREA
D SE
ALIN
G
Loctite 574 Multi-Gasket.
One product for any shape or size of gasket.
Seals even scored or damaged flanges.574
Application examples:Replaces traditional gaskets.This general purpose flangesealant fills scratches andgouges up to 0.5mm deep onmetal flanges. Maximum operating temperature 150C.
GASK
ETIN
G
Loctite 603 High Strength Retaining Compound.
For oil contaminated parts.
Prevents corrosion and fretting.603
Application examples:Replaces or augments interference fits, pins, splines,keys and screws. Can be usedon as received parts. Use to fit oil impregnated bushes.Maximum operating temperature 150C.
RETA
ININ
G
Loctite 648 High Temperature Retaining Compound.
High Strength. 648Application examples:For bonding cylinder liners,pump impellors, bushes andother applications that are subjected to operating temperatures up to 175C.
RETA
ININ
G
Loctite 660 Quick Metal.
Use with Activator 7649. 660Application examples:Use to retain cylindrical components with gaps up to 0.5mm. Allows worn components to be reused thusreducing the downtime of theequipment.
RETA
ININ
G
Loctite 7063 Cleaner and Degreaser. 7063
Application examples:Solvent based general partscleaner which leaves no residue. Ideal for use prior toadhesive bonding and sealingapplications.
CLEA
NING
Loctite 8065 Copper Anti-Seize Stick.
Clean and easy to apply. 8065Application examples:Prevents seizure of hinge pins and bolts etc. on high temperature applications up to 980C.LU
BRIC
ATIO
N
Industrial Products Selector Chart
Henkel Loctite Adhesives LimitedTechnologies House, Wood Lane End,Hemel Hempstead, Hertfordshire HP2 4RQTechnical Helpline Phone: 01442 278100 Fax: 01442 278071E-mail: [email protected] www.loctite.co.uk
