70-659 TS: Windows Server 2008 R2, Server Virtualization · 11.02.2013 · Services (AD DS) domain...

MS Virtualization 70-659.by.realstuff.49

Number: 070-659Passing Score: 700Time Limit: 120 minFile Version: 1.2

http://www.gratisexam.com/

70-659 TS: Windows Server 2008 R2, Server Virtualization

Exam A

QUESTION 1You work as a Network Administrator at ABC.com. The network consists of a single Active Directory DomainServices (AD DS) domain. All servers run Windows Server 2008 R2 and all client computers Windows 7Professional.

The company network consists of an internal LAN and a perimeter network. The two networks are separatedby an internal corporate firewall. An external corporate firewall connects the perimeter network to the Internet.

The network includes virtual machines (VMs) running on host servers contained in both the internal networkand the perimeter network.

You have recently installed a server named ABC-VMM1 on the internal network. ABC-VMM1 runs MicrosoftSystem Center Virtual Machine Manager (VMM) 2008 R2 and will be used to manage the virtual environment.

You are now in the process of deploying VMM agents on the host servers. You have configured the portnumber for the VMM agents and configured the internal corporate firewall to allow communications on theappropriate port number.

What else do you need to configure to ensure that the VMM agents can communicate with ABC-VMM1?

A. You need to configure the name of the VMM server (ABC-VMM1).B. You need to configure the Fully Qualified Domain Name (FQDN) of a domain controller.C. You need to configure the name of a SQL Server.D. You need to configure an encryption key.

Correct Answer: DSection: (none)Explanation

Explanation/Reference:

QUESTION 2You work as a Network Administrator at ABC.com. The network consists of a single Active Directory DomainServices (AD DS) domain. All servers run Windows Server 2008 R2 and all client computers Windows 7Professional.

The company network consists of two subnets. The Development subnet is used by the Developmentdepartment. The Production subnet is used by all other company departments.

You install a Windows Server 2008 R2 Hyper-V server named ABC-VMHost1 in the Production subnet. ABC-VMHost1 contains two network interface cards named NIC1 and NIC2. You have configured NIC1 as amanagement interface.

You want to configure ABC-VMHost1 to host virtual machines on both the Production subnet and theDevelopment subnet.

How should you configure ABC-VMHost1?

A. You should use VLAN tags for the VMs and configure NIC2 to use Trunk Mode.B. You should assign NIC2 as an additional management interface.C. You should configure both adapters to support jumbo frames.D. You should configure NIC1 with an IP address in the Production subnet and configure NIC2 with an IP

address in the Development subnet.

Correct Answer: A

Section: (none)Explanation


QUESTION 3You work as a Network Administrator at ABC.com. The network consists of a single Active Directory DomainServices (AD DS) domain. All servers in the network run Windows Server 2008 R2.

A server named ABC-VMM1 runs Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 and isused to manage the company’s virtual environment.

The company includes a Development department. Users in the Development department use their computersto develop and test software applications for use by other company departments and customers.

You install a Windows Server 2008 R2 Hyper-V server named ABC-VMTest1 in the Development department. ABC-VMTest1 will host virtual machines (VMs) for the Development department users to use to test theirapplications.

You need to ensure that the VMs are completely isolated from production servers.

How can you ensure that the test VMs can communicate with each other while being isolated from the hostserver and the rest of the network?

A. By configuring the VMs to connect to a Dedicated virtual network.B. By configuring the VMs to connect to an Internal virtual network.C. By configuring the VMs to connect to a Local virtual network.D. By configuring the VMs to connect to a Private virtual network.



QUESTION 4You work as a Network Administrator at ABC.com. The network consists of a single Active Directory DomainServices (AD DS) domain.

You are configuring a virtual environment for the company. You have an iSCSI storage disk array that will beused to store virtual machines (VMs).

You install a server named ABC-Host1 that runs a Server Core Installation of Windows Server 2008 R2.

You need to configure ABC-Host1 to store to VMs on the iSCSI disk array.

Which two of the following tools could you use?

A. You could use Disk Management.B. You could use Diskpart.exe.C. You could use iSCSICLI.exe.D. You could use iSCSICPL.exe.

Correct Answer: CDSection: (none)

Explanation


QUESTION 5You work as a Network Administrator at ABC.com. The network consists of a single Active Directory DomainServices (AD DS) domain named ABC.com.

The company network consists of an internal LAN and a perimeter network. To comply with company securitypolicy, servers located in the perimeter network are not members of the ABC.com domain.

A Microsoft Hyper-V Server 2008 R2 server named ABC-VMHost1 is located in the perimeter network.

You relocate ABC-VMHost1 into the internal network. You now need to join ABC-VMHost1 to the ABC.com ADDS domain.

How should you join ABC-VMHost1 to the ABC.com domain?

A. You should use the System Properties control panel applet.B. You should use the Netsh command line utility.C. You should use the Hyper-V configuration utility (hvconfig).D. You should use the dcpromo utility.




You have installed a Server Core Installation of Windows Server 2008 R2 on a server named ABC-SRV1.

You use a Windows 7 Professional client computer named ABC-Admin1. You want to be able to manage thestorage on ABC-SRV1 using the Disk Management tool on ABC-Admin1.

You need to configure the firewall on ABC-SRV1 by creating a rule group using the Netsh advfirewallcommand.

Which rule group should you create to enable you to remotely manage the storage on ABC-SRV1?

A. You should create a “Remote Administration” rule group.B. You should create a “Remote Desktop” rule group.C. You should create a “Remote Volume Management” rule group. D. You should create a “Remote Access” rule group.

Correct Answer: CSection: (none)Explanation



You are installing a new virtual environment based on Microsoft Hyper-V. You have installed a Server CoreInstallation of Windows Server 2008 R2 on a server named ABC-VMHost1.


How would you add the Hyper-V role to ABC-VMHost1?

A. By running the Add Roles Wizard in Server Manager.B. By running the start /w hvconfig command.C. By running the start /w ocsetup Microsoft-Hyper-V.D. By running the start-service Hyper-V command.



QUESTION 8You work as a Network Administrator at ABC.com. The network consists of a single Active Directory DomainServices (AD DS) domain named ABC.com. All servers run Windows Server 2008 R2 and all client computersWindows 7 Professional.

You are installing a large virtual environment for the company. A server named ABC-VMM1 runs MicrosoftSystem Center Virtual Machine Manager (VMM) 2008 R2 and will be used to manage the entire virtualenvironment.

You have installed a Server Core Installation of Windows Server 2008 R2 Datacenter edition on 50 newservers.

What is the easiest way to install the Hyper-V role on the 50 new servers?

A. By running the Add Hosts Wizard on ABC-VMM1 and selecting a new server to add to VMM. Repeat theprocess for each new server.

B. By running the start /w ocsetup Microsoft-Hyper-V command on each new server.C. By running the Add Hosts Wizard on ABC-VMM1 and selecting all 50 servers to add to VMM.D. By running the ocsetup MultiPathIo command on ABC-VMM1.



QUESTION 9You work as a Network Administrator at ABC.com. The network consists of a single Active Directory Domain

Services (AD DS) domain.

You are configuring a virtual environment for the company. You have an iSCSI storage disk array that will beused to store virtual machines (VMs).

You install a server named ABC-Host1 that runs a Server Core Installation of Windows Server 2008 R2 theninstall PowerShell 2.0 and the Hyper-V role.

You need to start the Microsoft iSCSI Initiator Service on ABC-Host1 to enable the server to connect to theiSCSI storage disk array.

How should you start the Microsoft iSCSI Initiator Service on ABC-Host1?

A. You should run the start /w ocsetup msiscsi command.B. You should launch PowerShell and run the start-service msiscsi cmdlet.C. You should launch PowerShell and run the set-service msiscsi CstartupType auto cmdlet.D. You should run the net start msiscsi command.

Correct Answer: ASection: (none)Explanation



The network includes virtual machines (VMs) running on VMware host servers and Hyper-V host servers.

A server named ABC-VMM1 runs Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 and isused to manage the entire virtual environment.

Which virtual disk file system is supported by VMM when performing virtual-to-virtual (V2V) conversions ofVMware virtual machines?

A. VHDVVIB. VMFSC. NFSD. vmfsRawOutput

Correct Answer: BSection: (none)Explanation


QUESTION 11You work as a Network Administrator at ABC.com. The network consists of a single Active Directory DomainServices (AD DS) domain named ABC.com. All servers run Windows Server 2008 R2.



You plan to perform a virtual-to-virtual (V2V) conversion on ABC-VMM1. You configure the disk I/O with aresource importance setting of Very Important.

What else should you do to ensure that the VM is placed on the host server with the most available disk I/O?

A. You should install Virtual Machine Additions on the VM.B. You should set Resource to minimize.C. You should set the placement goal to Load balancing.D. You should configure a hardware profile for the VM.



QUESTION 12You work as a Network Administrator at ABC.com. The network consists of a single Active Directory DomainServices (AD DS) domain that includes servers running Windows Server 2008 R2, Windows Server 2003,Windows 2000 Server with SP4, Windows 2000 Server with SP3 and Windows NT Server with SP6a.

The network includes a virtual environment consisting of virtual machines (VMs) running on Hyper-V hostservers.

A server named ABC-VMM1 runs Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 and isused to manage the virtual environment.

You are in the process of migrating the physical servers to virtual machines. You plan to perform physical-to-virtual (P2V) conversions using ABC-VMM1.

Which of the following operating systems cannot be converted by using online P2V conversions? (Choose allthat apply).

A. Windows Server 2008 R2.B. Windows Server 2003.C. Windows 2000 Server with SP4.D. Windows 2000 Server with SP3.E. Windows NT Server with SP6a.

Correct Answer: CDESection: (none)Explanation



The company has a virtual environment that consists of two host servers named ABC-VMHost1 and ABC-VMHost2. Both host servers run Microsoft Server 2008 R2 with Hyper-V.

ABC-VMHost1 hosts a running virtual machine (VM) named ABC-VM1. You want to move ABC-VM1 to ABC-VMHost2 and maintain the point-in-time state of ABC-VM1.

What should you do first?

A. You should pause ABC-VM1 then export it.B. You should save ABC-VM1 then export it.C. You should shut down ABC-VM1 then export it.D. You should power off ABC-VM1 then export it.






You plan to use ABC-VMM1 to perform several virtual-to-virtual (V2V) conversions of VMware VMs to Hyper-VVMs.

What should you do to ensure that the VMs are placed on the fewest possible host servers during the V2Vconversions?

A. You should set the resource importance setting of each resource to Very Important.B. You should set the default placement goal to Resource maximization.C. You should set the default placement goal to Load balancing.D. You should set the resource importance setting of Disk Space to Very Important.




The company has a virtual environment that consists of two host servers named ABC-VMHost1 and ABC-VMHost2. Both host servers run Microsoft Server 2008 R2 with Hyper-V. Both servers have a C: drive and aD: drive.

ABC-VMHost1 hosts a running virtual machine (VM) named ABC-VM1. You want to move ABC-VM1 to ABC-VMHost2.

You export ABC-VM1 to a folder named D:\VMs\Exports then copy the files to the same location on ABC-VMHost2.

Which folder should you import ABC-VM1 from on ABC-VMHost2.

A. You should select D:\VMs\Exports\ABC-VM1B. You should select D:\VMs\ExportsC. You should select D:\VMsD. You should select D:\VMs\Imports\ABC-VM1E. You should select D:\VMs\Imports\




The network includes physical servers and a virtual environment that consists of Microsoft Hyper-V hostservers.


A physical server named ABC-DC2 is configured as a domain controller for the ABC.com domain.

You plan to use ABC-VMM1 to perform a physical-to-virtual (P2V) conversion of ABC-DC2.

What should you do before the P2V conversion?

A. You should demote ABC-DC2 to a domain member server.B. You should convert the system partition to a dynamic disk on ABC-DC2.C. You should defragment the hard disks on ABC-DC2.D. You should enable disk compression on ABC-DC2.




You are configuring a new virtual environment that consists of a Windows Server 2008 R2 Hyper-V host servernamed ABC-VMHost1.

You create a virtual machine named BaseVM1 on ABC-VMHost1. You want to use BaseVM1 as a base imageto create multiple VMs on ABC-VMHost1.

When you run the Import Virtual Machine Wizard, which two of the following options should you select toensure that you can import BaseVM1 multiple times? (Choose two).

A. You should select the option to copy the virtual machine.

B. You should select the option to move or restore the virtual machine.C. You should tick the Duplicate all files check box.D. You should clear the Duplicate all files check box.

Correct Answer: ACSection: (none)Explanation



You have a virtual environment that consists of four Windows Server 2008 R2 Hyper-V host servers in afailover cluster.

There are 20 virtual machines (VMs) spread evenly over the 4 nodes in the cluster.

What is the maximum number of simultaneous live migrations that you could perform on the cluster?

A. You can perform one live migration at a time.B. You can perform two simultaneous live migrations.C. You can perform four simultaneous live migrations.D. You can perform ten simultaneous live migrations.E. You can perform twenty simultaneous live migrations.




The network includes virtual machines (VMs) running on VMware ESX host servers and Hyper-V host servers.


How can you enable users without administrative permissions to manage checkpoints or snapshots for bothVMware VMs and Hyper-V VMs?

A. By using the VMM Self-Service Portal to create checkpoints.B. By using the VMware ESX web portal to create snapshots. C. By using the VMware VI Client to create snapshots.D. By using Hyper-V Manager to create snapshots.




You have a virtual environment that consists of four Windows Server 2008 R2 Hyper-V host servers in afailover cluster. Each node in the cluster hosts two virtual machines (VMs).

You plan to back up the Cluster Shared Volume (CSV) using a Volume Shadow Copy backup.

How should you configure the CSV to ensure that the cluster nodes can continue to use the CSV during thebackup?

Exhibit:

A. You should place the CSV in Offline mode.B. You should place the CSV in Redirected Access mode.C. You should place the CSV in Maintenance Mode.D. You should place the CSV in Direct Access mode.



QUESTION 21You work as a Network Administrator at ABC.com. The network consists of a single Active Directory DomainServices (AD DS) domain. All servers run Windows Server 2008 R2.

The company network consists of an internal LAN and a perimeter network. The two networks are separatedby an internal corporate firewall. An external corporate firewall connects the perimeter network to the Internet.

The network includes virtual machines (VMs) running on Hyper-V host servers contained in both the internalnetwork and the perimeter network.


You want to migrate a child partition from a host server in the internal LAN to a host server in the perimeternetwork.

Which port should you open on the internal corporate firewall to enable the migration?

Exhibit:

A. You should open port 139.B. You should open port 21.C. You should open port 80.D. You should open port 445.




You manage a virtual environment that consists of a Windows Server 2008 R2 Hyper-V host server namedABC-VMHost1.

You discover that when you take a snapshot of a virtual machine (VM) on ABC-VMHost1, you are not promptedto enter a name for the snapshot.

How can you ensure that you are prompted to enter a name when creating a snapshot?

A. By pausing the VM before taking the snapshot.B. By using the VM Connection window to create the snapshot.C. By creating the snapshot in the Hyper-V Manager console.

D. By deleting any existing snapshots for the VM.




You are configuring a virtual environment for the company. The virtual environment will initially consist of 4 hostservers and 8 child partitions.

You have installed a server named ABC-VMM1 on the internal network. ABC-VMM1 runs Microsoft SystemCenter Virtual Machine Manager (VMM) 2008 R2 and will be used to manage the virtual environment.

The virtual environment needs to be scalable and must support SAN migration.


What is the maximum number of child partitions you can place on a logical unit number (LUN) and support SANmigrations?

A. SAN migration supports up to n child partitions per LUN where n equals the total number of hosts in thecluster.

B. SAN migration supports up to 4 child partitions per LUN.C. SAN migration supports up to 32 child partitions per LUN.D. SAN migration supports only a single child partition per LUN.




You manage a virtual environment that consists of a Windows Server 2008 R2 Hyper-V host server namedABC-VMHost1.

ABC-VMHost1 stores the Virtual Hard Disk (VHD) files for it’s VMs on a directly attached disk storage array. The disk storage array appears as the D: drive on ABC-VMHost1.

Some of the VMs hosted on ABC-VMHost1 also have directly attached physical disks.

How should you backup a VM that has a directly attached physical disk?

A. You should use Windows Server Backup on ABC-VMHost1 to back up all locally attached disks.B. You should use Windows Server Backup on the VM to perform a Full Server Backup.C. You should use Windows Server Backup on the VM to perform a Critical Volume Backup.D. You should use Windows Server Backup on the VM to perform a Critical Volume Backup and use Windows

Server Backup on ABC-VMHost1 to perform a Critical Volume Backup.





You need to deploy a highly available virtual machine (HAVM). To ensure the high availability, the VM mustsupport live migration between the hosts in the cluster.

The HAVM must also support differencing disks and snapshots.

On which type of storage should you install the operating system for the HAVM?

A. You should configure a pass-through disk on a LUN of a Fibre Channel SAN.B. You should configure a VHD on Publick network folder.C. You should configure a VHD on a LUN of an iSCSI SAN.D. You should configure a pass-through disk on a LUN of an iSCSI SAN.





Which PowerShell cmdlet should you run to place a disk in maintenance mode?

A. You should run the Suspend- ClusterNode cmdlet.B. You should run the Suspend- ClusterResource cmdlet.C. You should run the Suspend- ClusterAccess cmdlet.D. You should run the Stop- Cluster cmdlet. E. You should run the Stop- ClusterGroup cmdlet.

Correct Answer: BSection: (none)

Explanation



The company has a virtual environment that consists of two host servers named ABC-VMHost1 and ABC-VMHost2. Both host servers run Microsoft Server 2008 R2 Standard with Hyper-V.


Which two of the following VM migration methods are not supported by your current Hyper-V infrastructure?(Choose two).

A. You cannot perform Network Migrations.B. You cannot perform Live Migrations.C. You cannot perform SAN Migrations.D. You cannot perform Quick Migrations.

Correct Answer: BDSection: (none)Explanation



You have a virtual environment that consists of two Windows Server 2008 R2 Hyper-V host servers in a failovercluster. The cluster connects to a single logical unit number (LUN) on an iSCSI SAN.


You configure a highly available virtual machine (HAVM) named ABC-HAVM1 on the cluster and configure it tostore the VHD files on the iSCSI LUN.

You then configure a second highly available virtual machine (HAVM) named ABC-HAVM2 on the cluster andconfigure it to store the VHD files on the iSCSI LUN.

You notice an error on ABC-VMM1 saying that both ABC-HAVM1 and ABC-HAVM2 have an UnsupportedCluster Configuration.

How should you change the configuration to enable you to manage both HAVMs using ABC-VMM1?

A. You should configure ABC-HAVM1 to run on one cluster node and configure ABC-HAVM2 to run on theother cluster node.

B. You should configure a new iSCSI LUN and move the VHD of ABC-HAVM2 to the new LUN.C. You should configure at least one of the HAVMs to use a pass-through disk.D. You should move the VHD of ABC-HAVM2 to a directly attached disk on one of the cluster nodes.

Correct Answer: B

Section: (none)Explanation



You have a virtual environment that consists of four Windows Server 2008 R2 Hyper-V host servers in afailover cluster. The cluster hosts 20 virtual machines (VMs).

You want to allow helpdesk staff to start and stop VMs on the servers. You create a security group in ActiveDirectory named Helpdesk and add the helpdesk user accounts to the group. You then use AuthorizationManager to create a role in the default scope.

Which of the following additional steps should you perform? (Choose all that apply).

A. Add the Helpdesk group to the Administrator role in the default scopeB. Add the Stop Virtual Machine and Start Virtual Machine operations to the role.C. Assign the Helpdesk group to the role.D. Add the Stop Virtual Machine and Start Virtual Machine operations to a task.E. Add the task to the role.

Correct Answer: BCSection: (none)Explanation



A server named ABC-VMHost1 runs Microsoft Server 2008 R2 with Hyper-V.

ABC-VMHost1 runs two VMs named ABC-VM1 and ABC-VM2 respectively.

You notice that the two VMs are using 100% of the CPU resources on ABC-VMHost1. Each VM is using 50%of the CPU resources.

You want to restrict ABC-VM1 to a maximum of 30% of the total CPU resources on ABC-VMHost1 to providemore CPU resources for ABC-VM2 and any future VMs.

How can you restrict ABC-VM1 to 30% CPU?

A. By navigating to the resource control setting for the CPU of ABC-VM1 and setting the virtual machine limit to30.

B. By navigating to the resource control setting for the CPU of ABC-VM1 and setting the relative weight to 30.C. By navigating to the resource control setting for the CPU of ABC-VM1 and setting the virtual machine

reserve to 30.D. Configure a Resource Pool with a CPU restriction. Move ABC-VM1 to the Resource Pool.

Correct Answer: ASection: (none)

Explanation



You have a virtual environment that consists of two Windows Server 2008 R2 Hyper-V host servers in a failovercluster. The cluster connects to a single logical unit number (LUN) on an iSCSI SAN.


You configure a highly available virtual machine (HAVM) named ABC-HAVM1 on the cluster and configure it tostore the VHD files on the iSCSI LUN. You use a media image in the form of an ISO file to install the operatingsystem on ABC-HAVM1.

You notice an error on ABC-VMM1 saying that ABC-HAVM1 has an Unsupported Cluster Configuration.

How should you change the configuration to enable you to manage ABC-HAVM1 using ABC-VMM1?

A. You should disable snapshots on ABC-HAVM1. B. You should edit the configuration of ABC-HAVM1 by detaching the media image.C. You should copy the media image ISO file to the iSCSI LUN.D. You should configure ABC-HAVM1 to use a pass-through disk.




You have a virtual environment that consists of four Windows Server 2008 R2 Hyper-V host servers in afailover cluster. The cluster hosts 20 virtual machines (VMs).

You configure the virtual environment to allow helpdesk staff to start and stop VMs on the servers.

You later discover that helpdesk users can edit VM settings. You suspect that another administrator has madechanges.

How can you audit changes made to Hyper-V authorization rights and roles?

A. By enabling auditing of privilege use in Active Directory.B. By monitoring the security log on the Hyper-V servers.C. By auditing the InitialStore.xml file on the Hyper-V servers.D. By auditing the Hyper-V event logs using the Hyper-V console.





You have a virtual environment that consists of four Windows Server 2008 R2 Hyper-V host servers.


A user named Clive Allen works in the Development department. You need to enable Clive to perform certaintasks on the Hyper-V servers. Clive needs to be able to start and stop and pause and resume virtual machines(VMs). Clive also needs to be able to create new VMs and delete VMs.

How can you enable Clive to perform the required tasks?

A. By adding Clive’s domain user account to the local Administrators group on each Hyper-V server.B. By using VMM on ABC-VMM1 to assign Clive’s domain user account the Local Administrator permission.C. By creating a Self-Service user role in VMM on ABC-VMM1.D. By adding the required VM operations to a task and assigning the task to Clive’s domain login.






You use ABC-VMM1 to deploy a cloned VM.

What would happen if you deployed a cloned VM to the same host as the source VM?

A. The process would fail.B. You would be directed to select a different host.C. The process would succeed but the VM would be automatically assigned a different name.D. The process would succeed and create the cloned VM with the same name as the source VM.




The company has a virtual environment that includes a host server named ABC-VMHost1. ABC-VMHost1 runsMicrosoft Server 2008 R2 with Hyper-V.

ABC-VMHost1 hosts a running virtual machine (VM) named ABC-VM1. ABC-VM1 has a primary virtual diskconnected to IDE Controller 0. The primary disk hosts the VM’s Windows Server 2003 R2 operating system. ABC-VM1 also has a secondary virtual disk. The secondary virtual disk is connected to SCSI controller 0.

You need to add a third virtual disk to ABC-VM1. You want to avoid shutting down ABC-VM1.

How should you configure the third virtual disk?

A. You should attach a VHD to a secondary IDE Controller.B. You should configure a VHD file for the third disk in the same location as the primary virtual disk.C. You should configure the third virtual disk as a pass-through disk attached to the primary IDE controller.D. You should attach a VHD to the existing SCSI controller.






You need to install the VMM Self-Service Portal on ABC-VMM1. You are in the process of installing the WebServer (IIS) role. You verify that ABC-VMM1 has the Microsoft .NET Framework 2.0 with ASP.NET installed.

Which other Web Server (IIS) role services do you need to install before installing install the VMM Self-ServicePortal?

A. You need to install the IIS Monitoring Tools.B. You need to install the FTP Server role.C. You need to install the SMTP Server role.D. You need to install IIS 6 Management Compatibility.



QUESTION 37

You work as a Network Administrator at ABC.com. The network consists of a single Active Directory DomainServices (AD DS) domain named ABC.com.

You have a virtual environment that consists of four Windows Server 2008 R2 Hyper-V host servers in afailover cluster. The cluster hosts several virtual machines (VMs).

You want to create four virtual machines (VMs) running Windows Server 2008 R2 configured as Web Serversin a Network Load Balancing (NLB) cluster. You want to create one Web Server VM on each of the four Hyper-V host servers.

What do you need to do before you can enable Network Load Balancing (NLB) on the VMs?

A. You need to configure the network adapter on each VM to enable IPv6.B. You need to configure the network adapter on each VM to enable Jumbo Frames.C. You need to configure the network adapter on each VM to disable IP address spoofing.D. You need to configure the network adapter on each VM to enable MAC address spoofing.





ABC-VMHost1 hosts a Windows Server 2008 R2 virtual machine (VM) named ABC-VM1. The VHD isconfigured as Dynamically Expanding.

The C: drive in ABC-VM1 is running low on space.

Which three of the following steps should you perform to increase the C: drive of ABC-VM1? (Choose three).

A. Run the Edit Virtual Hard Disk Wizard for ABC-VM1 in Hyper-V Manager.B. Run the New Virtual Hard Disk Wizard for ABC-VM1 in Hyper-V Manager.C. Expand the VHD to the required size.D. Convert the VHD to a fixed-size disk of the required size.E. Create a new VHD of the required size.F. Use Hyper-V Manager to copy the old VHD to the new VHD.G. Run Disk Management in ABC-VM1 and extend the C: Drive.

Correct Answer: ACGSection: (none)Explanation



You are configuring a virtual environment for the company. You install a server named ABC-Host1 that runsWindows Server 2008 R2 with Hyper-V. You have an iSCSI storage disk array that is used to store virtualmachines (VMs).

You want to install a VM that uses a pass-through disk. You must be able to boot the VM from the pass-through disk.

You configure the disk on ABC-Host1, initialize the disk and take the disk offline. You create a VM on ABC-Host1 and configure the VM configuration file to be located on ABC-Host1.

How should you configure the disk for the VM?

A. You should attach the disk to a external controller and install the operating system on the pass-through disk.B. You should attach the pass-through disk to an IDE controller and install the operating system on the pass-

through disk.C. You should attach the pass-through disk to a SCSI controller and install the operating system on a separate

VHD. D. You should attach the pass-through disk to an IDE controller and install the operating system on a separate

VHD.




You have a virtual environment that consists of five Windows Server 2008 R2 Hyper-V host servers. TheHyper-V host servers are named ABC-HVHost1, ABC-HVHost2, ABC-HVHost3, ABC-HVHost4 and ABC-HVHost5.


A user named Mia Hamm has been hired as a junior IT Technician. You want to enable Mia to create newvirtual machines (VMs) on ABC-HVHost3 and ABC-HVHost5 only. Mia must not be able to see the other threehost server when she is logged in to VMM.

You plan to assign Mia to a role with the required permissions to manage the servers by using the VMM Self-Service Portal.

How can you restrict Mia’s access to only ABC-HVHost3 and ABC-HVHost5?

A. By moving the computer accounts for ABC-HVHost3 and ABC-HVHost5 to a separate Organizational Unit(OU) in Active Directory.

B. By add the computer accounts for ABC-HVHost3 and ABC-HVHost5 to a global security group in ActiveDirectory.

C. By adding ABC-HVHost3 and ABC-HVHost5 to a Host Group in VMM.D. By adding ABC-HVHost3 and ABC-HVHost5 to a separate VLAN.




You have a virtual environment that consists of several Windows Server 2008 R2 Hyper-V host servers.

A physical Windows Server 2008 R2 server runs Windows Deployment Services and is used to deployoperating system images to new computers on the network.

You are configuring a new virtual machine (VM). You want the VM to be able to perform a network Pre-Execution Environment (PXE) boot so that it can connect to the WDS server and download an operatingsystem image.

How should you configure the VM?

A. You should modify the BIOS of the VM to enable PXE support.B. You should select the option to add a Network Adapter to the VM.C. You should configure a static IP address for the VM.D. You should select the option to add a Legacy Network Adapter to the VM.




You have a virtual environment that consists of several Windows Server 2008 R2 Hyper-V host servers.


You install a Windows Server 2008 R2 Hyper-V host server named ABC-DevHost1 to host virtual machines(VMs) for use by users in the Development department.

ABC-DevHost1 has a single physical network adapter. The network adapter is connected to a virtual networkwhich is configured as External.

You create a VM named Dev-VM1 on ABC-DevHost1. You install and configure Windows Server 2008 on theDev-VM1. You discover that Dev-VM1 can see other computers on the network, but it cannot see ABC-DevHost1 on the network.

How can you enable ABC-DevHost1 to be visible on the network?

A. By ticking the checkbox labeled, “Allow management operating system to share this network adapter”.B. By clearing the checkbox labeled, “Allow management operating system to share this network adapter”.C. By installing a second network adapter in ABC-DevHost1.D. By configuring a static IP address on ABC-DevHost1.E. By configuring the virtual network type as Local.





ABC-VMHost1 hosts a running virtual machine (VM) named ABC-VM1. The primary virtual disk for ABC-VM1is a VHD connected to IDE 0. ABC-VM1 also has a DVD drive connected to IDE 1.

You want to add five more virtual disks to ABC-VM1.

What is the minimum number of additional disk controllers you would need to add five more virtual disks toABC-VM1?

A. None. You can attach the new virtual disks to IDE 0.B. None. You can attach three new virtual disks to IDE 0 and two virtual disks to IDE 1.C. One. You can attach the new virtual disks to a single SCSI controller.D. Three. You can attach one virtual disk to both IDE 0 and IDE 1 and the remaining three virtual disks to three

new controllers.E. Five. You need one additional controller for each virtual disk.





You want to install a VM that uses a pass-through disk.

You attach the disk on ABC-Host1 and initialize the disk in Disk Management.

When you create a VM using Hyper-V Manager on ABC-Host1, you discover that the physical disk is notavailable for selection in the drop down list of physical disks.

What needs to be done to make the physical disk available for selection as a pass-through disk?

A. The disk needs to be converted to a dynamic disk in Disk Management on ABC-Host1.B. The disk needs to be formatted in Disk Management on ABC-Host1.C. The disk needs to be taken offline in Disk Management on ABC-Host1.D. The disk needs to be attached to an IDE controller in the VM settings.





You want to install a VM that uses a pass-through disk.

You configure the disk on ABC-Host1, initialize the disk and take the disk offline. You create a VM on ABC-Host1 and configure the VM with a pass-through disk attached to IDE controller 0

Where should you place the configuration file for the VM?

A. You should place the configuration file on the pass-through disk.B. You should place the configuration file on ABC-Host1.C. You should place the configuration file on a separate VHD attached to the VMD. Any of the above answers would work.




A server named ABC-VMHost1 runs Microsoft Server 2008 R2 with Hyper-V.

You configure a virtual machine named ABC-VM1 on ABC-VMHost1. You then install Windows Server 2003with service pack 2 on ABC-VM1. ABC-VM1 includes a Network Adapter and is attached to the ABC.comnetwork.

How can you optimize the network performance for ABC-VM1?

A. By changing the Network Adapter for a Legacy Network Adapter.B. By configuring a separate virtual switch for ABC-VM1.C. By installing Integration Services on ABC-VM1.D. By configuring a static IP address for ABC-VM1.




You have a virtual environment that consists of three Windows Server 2008 R2 Hyper-V host servers in afailover cluster.


A highly available virtual machine (HAVM) named ABC-HAVM1 is hosted on the cluster.

You add a fourth server to the cluster. You then move ABC-HAVM1 to the new server.

You see an error on ABC-VMM1 saying that ABC-HAVM1 has a status of Unsupported Cluster Configuration.

How should you change the configuration to enable you to manage ABC-HAVM1 using ABC-VMM1?

A. You should modify the virtual networking configuration of the new cluster node to match the other threenodes.

B. You should modify the virtual networking configuration of the original three cluster nodes to match the newcluster node.

C. You should configure the network adapters of the new cluster node to disable TCP Chimney Offload.D. You should move the configuration file for ABC-HAVM1 to storage directly attached to the new cluster node.




The company includes a Development department. Users in the Development department use their computersto develop and test software applications for use by other company departments and customers. All users inthe Development department are members of an Active Directory global security group named DevelopmentUsers.


You want to give members of the Development Users group the ability to manage virtual machines on just oneof the Hyper-V servers without granting administrative privileges on the server.

Which utility should you use to provide the required access?

A. You should use the Local Users and Group MMC snap-in on the host server.B. You should you Active Directory Users and Computers on a domain controller.C. You should use Authorization Manager on the host server.D. You should use the Local Security Policy MMC snap-in on the host server.




The network includes physical servers and a virtual environment that consists of Microsoft Windows Server2008 R2 Hyper-V host servers.


A physical server named ABC-App1 runs a legacy application. ABC-App1 runs Windows 2000 Server withService Pack 3 and contains a single 20GB hard disk formatted with the FAT32 file system. The legacyapplication will not run on Windows Server 2008 R2. You therefore plan to perform a physical-to-virtual (P2V)conversion of ABC-App1.

What should you do to ensure a successful P2V conversion of ABC-App1?

A. You should convert the file system of the hard disk to NTFS.B. You should install Windows 2000 Server Service Pack 4 on ABC-App1.C. You should defragment the system partition on ABC-App1.D. You should perform an offline P2V conversion.E. You should perform an online P2V conversion.




70-659 TS: Windows Server 2008 R2, Server Virtualization · 11.02.2013 · Services (AD DS) domain...

Documents

Transcript of 70-659 TS: Windows Server 2008 R2, Server Virtualization · 11.02.2013 · Services (AD DS) domain...