[40] Hartmann-Sanders 1.800.241
Transcript of [40] Hartmann-Sanders 1.800.241
Hartmann-Sanders™ Architectural Wood Columns are based upon the timeless
orders of Classical Architecture. From the design of the capital to the proportions and shape of the column shaft, we follow the standards of classic column design. With over 100 years of experience manufacturing columns, Hartmann-Sanders™ off ers the largest selection of authentic Architectural Wood Columns in the industry. We recommend solid stave or fi nger-joint western red cedar or clear all heart redwood for exterior applications. It is naturally weather resistant and immune to decay and infestation. Pine or polar may be used for interior columns that are to be painted. We also off er a large selection of stain-grade columns. Oak, cherry, maple, mahogany and poplar are the most common species used for stain-grade, however other wood species are available upon request. An interior asphaltum coating is applied on all columns to be used for exterior use. Columns that are to be painted are primed with three coats of an oil-based primer after they are turned. Each coat of primer is hand sanded to give an excellent surface for your fi nal topcoats.
Columns may serve as a structural member or as a decorative accent. Columns which are to be installed around a structural support for decorative purposes will be manufactured in halves and provided with a spline joint for aligning the halves. For load bearing capacities, please contact our Architectural Specialists.
A large selection of capitals and base/plinths are available and manufactured of a high-density polyurethane, fi berglass or wood. Numerous styles of Decorative Capitals are also available to complement any design.
[40] Hartmann-Sanders www.hartmannsanders.com 1.800.241.4303
PLAIN
DORIC: Section showing the standard 20 Doric Flutes on designs 215 and 195
IONIC: Section showing the standard 24 Ionic Flutes on all other fluted column designs.
Stave Construction:Our Wood Column shafts are formed of nominal 4” wide staves. Th e thickness of the stave depends on the height and diameter of the column shaft. Each stave is connected to the next with our patented Koll’s Lock-Joint, and is tapered to achieve uniform thickness throughout the shaft length. Tongue and Groove stave construction is also available and carries the same warranty as the Koll’s Lock-Joint. Th e staves are glued with the highest Type 1 water-resistant glue, interlocked, and kept under pressure for a minimum of eighteen hours.
Stave Thickness:Our experience in the construction of columns has indicated that the thickness of the stock used is important and must provide enough material for proper architectural detail and strength. Th e nominal thickness of stock used is shown below in the table.
PlainStave
Thickness
11/2”2”3”4”
FlutedStave
Thickness
11/2”2”3”4”
Column SizeFluted
6” to 10”11” to 18”19” to 24”25” and up
Column SizePlain
Up to 10” and 10’ tall11” to 20”21” to 26”27” and up
Stave Thickness
Plan Types for Split Architectural Wood Columns
A B C D Q
E F G H K O
Column shafts may be plain or fluted, with the flutes being either Doric or Ionic design. The follow-ing illustrations show each design.
1.800.241.4303 www.hartmannsanders.com Architectural Wood Columns [41]
FG
H
B
CD
E
A
JK
F
GH
JK
B
A
CD
E
Width Height
Hartmann-Sanders™ Architectural Wood Columns
Tuscan Cap & Base Plinth | Column Design #200 plain; #205 fluted
Roman Doric Cap & Base/Plinth | Column Design #210 plain; #215 fluted
Column Size
6”8”10”12”14”16”18”20”22”24”26”28”30”32”34”36”
6”8”10”12”14”16”18”20”22”24”26”28”30”32”34”36”
TopShaft
DiameterB5
61/2
81/2
1012
131/2
1517
181/2
2022
231/2
2527
281/2
30
561/2
81/2
1012
131/2
1517
181/2
2022
231/2
2527
281/2
30
BottomShaft
DiameterA681012141618202224262830323436
681012141618202224262830323436
C81/2
103/4
133/8
161/8
183/4
211/2
241/4
27293/4
321/2
3538
401/2
433/8
46483/4
81/2
103/4
133/8
161/8
183/4
211/2
241/4
27293/4
321/2
3538
401/2
433/8
46483/4
D11/2
17/8
23/8
23/4
33/8
37/8
41/4
43/4
51/4
53/4
61/4
63/4
71/4
73/4
81/4
83/4
11/2
17/8
23/8
23/4
33/8
37/8
41/4
43/4
51/4
53/4
61/4
63/4
71/4
73/4
81/4
83/4
BaseMold
E 13/4
23/8
27/8
31/4
441/2
53/8
667/8
71/2
83/8
83/4
91/4
10107/8
113/8
13/4
23/8
337/16
447/8
55/8
61/4
63/4
71/2
81/8
85/8
93/8
10103/4
111/4
F71/2
93/8
121/8
143/8
171/8
191/4
211/2
241/4
261/2
283/4
311/2
333/8
353/4
375/8
41423/4
893/4
121/2
143/4
171/2
197/8
221/4
25273/8
293/4
321/2
345/8
37391/4
421/8
441/8
G11/16
13/8
13/4
223/8
23/4
333/8
33/4
41/8
43/8
43/4
51/8
51/2
53/4
61/4
11/8
11/2
13/4
23/8
23/4
31/8
31/2
443/8
41/2
51/8
51/2
57/8
61/4
65/8
7
H11/16
111/4
13/8
15/8
17/8
21/8
21/4
21/2
23/4
331/4
31/2
33/4
37/8
41/4
7/8
11/8
13/8
15/8
221/4
21/2
23/4
331/4
31/2
37/8
41/8
41/4
45/8
5
J15/8
15/8
23/16
23/16
25/8
25/8
35/16
33/4
437/8
35/8
31/2
43/4
553/4
53/4
15/8
15/8
23/16
23/16
25/8
25/8
35/16
33/4
437/8
35/8
31/2
43/4
553/4
53/4
K11/1611/163/43/4
11
15/16
13/8
13/8
11/2
13/4
17/8
17/8
221/4
21/4
11/1611/163/43/4
11
15/16
13/8
13/8
11/2
13/4
17/8
17/8
221/4
21/4
Plinth
Width Height
Cap SquareCap Round
[42] Hartmann-Sanders www.hartmannsanders.com 1.800.241.4303
Measurements in inches unless otherwise noted. There may be a variance of up to 1/8” in all dimensions.