TEMS 9.1 3G DRIVE TEST TOOL

Data Collection Requirements

1 TEMS 9.1 SOFTWARE

2 Dongle

3 Mobile Phone-SONY ERICSSON Z750i

4 GPS Garmin-72

Contents

•TEAM SOFTWAR INSTALLATION•KIT CONFIGRATION (Phone ,GPS)•DRIVE TEST PARAMETER

BTS

STEPS FOR INSTALLING TEMS 9.1 SOFTWARE :-

1 -First install .Net 3 and .net 3.5 in your PC:-

2-Now install TEMS 9.1:-

3- After installing TEMS, install the driver of Dongle, Mobile phone, and GPS Beffo cable by connecting the equipment in different ports.

Dongle driver is automatically install in your PC just when you connect in your PC.

But for Mobile and Beffo cable driver, you have to give the path of the driver.

4-After installing device drivers, Copy and Paste above patch files in C:\Program Files\Ericsson\TEMS Products\TEMS Investigation\ApplicationFolder.

5-Now open the TEMS window from.My Documents\TEMS Product Files\TEMS Investigation 9.1\Workspaces.In workspaces folder you have to open Investigation WCDMA GSM.

TEMS WINDOW AFTER INSTALLATION

STEP 1 FOR Configuration :-

STEP 2 FOR AAD EQUIPMENT :-

1. Step Select it

2.Step Select MS

STEP 3 FOR PORT DEFINE:- 3 .Step Save It

STEP 4 FOR MAKE NEW WORKSHEET :-

VOICE CALL –MS-SHEET

STEP 5 FOR New Worksheet :-

Go to command sequence

STEP 6 FOR COMMAND SEQUENCE :-

STEP 7 FOR Open the Command Sequence window

COMMAND SEQUENCE WINDOW :-

EDIT(CTRL+E)

FOR VOICE CALL

APPLICATION TESTING FORHSPA -MS

COMMAND SEQUENCE WINDOW APPLICATION

VOICE CALL TESTING APPLICATION

VOICE CALL TESTING1. STEP SELECT MS

2. STEP-TEST NUMBER

3. STEP CALL Duration

4. STEP RUN(CTRL+G)

HSDPA TESTING APPLICATION

1. FOR HSDPA APPLICATION TESTING -----FTP DL

2. STEP SELECT DIAL-UPDIAL-UP

3-STEP SOURCE FILE NAME :-FILE NAME

SAVE PATH

4. STEP REMOTE ADDRESS USER ,PASSWORD User name

password

IP ADDRESS

5 .START TO HSDPA RUN(CTRL+G)

RUN

HSDPA TESTING APPLICATION

HSUPA COMMAND SEQUENCE STEP FOR TESTING :- HSUPA-MS

1. DIAL-UP

2.FILE NAME

3.Save path

4.IP ADDRESS

4.PASSWORD

RUN

5.USER NAME

TEAMS 9. 1 MAP WINDOW

MAP WINDOW IN TEMS PRESENTATION POSITIONING MAP :-

MAP WINDOW FUNCATION :-

Layer Control

Open Map

1. .OPEN MAP 2. LAYER CONTROL

Open 3G Tab File in Open Map

Open The Tab ,Vector In Layer Control :-

DRIVE TEST MAP WINDOW CELL SITE VECTOR :-

WCDMA INVESTIGATION WINDOW FOR VOICE CALL:-

PARAMETER WINDOW FOR VOICE CALL WCDMA :-

FOR VOICE CALL WCDMA RADIO PARAMETER WINDOW :-

WCDMA SERVING/ACTIVE SET + NEIGHOURS

This windows shows the Serving cell & NeighborsAS : Active SetMN: Monitered NeighborsDN: Dominant Neighbors

RADIO PARAMETERS WCDMA BAR CHARTS

FOR VOICE CALL LAYER 3 MESSAGES :-

THIS WINDOW OPEN GO TO PRESENTATION--- SIGNALING---LAYER 3 MESSAGES

FOR VOICE CALL EVENT COUNTER WINDOW :-

THIS WINDOW OPEN GO TO ANALYSIS----EVENT COUNT

AMR CODEC USAGE IN WCDMA

NOTES ON QUANTITIES DENOTING SIGNAL POWER

FOR VOICE SHORT CALL SAME WINDOW USE IN TEMS

HSDPA ANALYSIS

FOR HSDPA TESTING IN WCDMA :-

THIS WINDOW OPEN GO TO PRESENTATION---WCDMA—DATA SERVICE—HSDPA ANALYSIS

It shows the Speed of HSDPA

HSDPA/HSUPA TESTING IN FTP(COMMAND PROMT) SERVER

HSDPA/HSUPA TESTING IN FTP SERVER

HSDPA/HSUPA TESTING IN FTP SERVER :-

We find out the RTT Average Value For HSDPA/HSUPA

HSUPA ANALYSIS

FOR WCDMA HSUPA TESTING :-THIS WINDOW OPEN GO TO PRESENTATION-WCDMADATA SERVICE HSUPA ANALYSIS

HOW TO GENRATE MAP-INFO FILE WITH TEMS HELP :-

HOW TO GENRATE MAP-INFO FILE WITH TEMS HELP :-

1. STEP GO TO TOOLBAR LOGFILE ----- EXPORT LOGFILE

STEP 2 GO TO EXPORT LOGFILE ------ADD FILE:-

SELECT THIS FORMAT

ADD DRIVE TEST LOGFILE

STEP 3 GO TO SETUP WINDOW OPEN Setup open

STEP FOR 4 AFTER SETUP WINDOW OPEN -

1 Select it

2 Add It

3 Step ok

STEP FOR 5 SELECT MERGE OUTPUT AND THEN OK :-

1. SELECT IT

4 SELECT OK

2 Open log file

3 Save Path

4.STEP START TO CONVERT LOG FILE TO MAPINFO FILE:-

START IT

LOG FILE CONVET TO MAPINFO FILE SHOWS SAVE PATH FOLDER

HOW TO AUTO-GENRATE REPORT IN TEMS 9. 1

OPEN TEMS LOGFILE WINDOW REPORT GENERATOR

ADD LOGFLIEPROPERTIES SELECT WCDMA

OUTPUT DIRECTORY FINIES

PROCESS TO REPORT GENERATOR

STEP 1 OPEN TEMS GO TO LOGFILE THAN REPORT GENERATOR

STEP 2 OPEN REPORT WIZARD THAN ADD LOG FILE :-

ADD LOG FILE

STEP 3 OPEN PROPERTIES AND SELECT WCDMA THEN OK :-

1 .Select It

2.Select ok

STEP 4 FOR SAVE PATH AND THAN FINISH :-

1 Save Path

2 Finish

STEP 5 FOR PROGRESS AND RESULT THEN OUT PUT REPORT:-

RETU(REMOTE ELECTRICAL TILT UNIT)

RETU(REMOTE ELECTRICAL TILT UNIT)

Two Cables are connected in RETU Dx1 Cable Tilt Monitor Cable

RET Unit is monitered from RNC to maximize or minimize Electrical Tilt.Minimum tilt should be 0 & Maximum tilt should be 10

We have also update the type of antenna in RNCi.e. single band, dual band or tri band antenna.

Also one Power Switch is in RET Unit.Upper press is ON & Down Press is OFF

RETU(REMOTE ELECTRICAL TILT UNIT)

WCDMA SPECIFICATIONS

DIFFERENCES BETWEEN WCDMA & SECOND GENERATION

SUMMARY OF WCDMA PARAMETERS

SPECTRUM UMTS

Third Generation Mobile Systems

End of Section