2013 Product Catalog - JS Hardware - a com

1

2013 Product Catalog

Jiangsu Shuanghui Power Development Co., LTD

Jim Cai -Not

Typewritten Text

www.JS-Hardware.com

Jim Cai -Not

Typewritten Text

2

Table of Contents

Introduction Page 1-5 Section 1 – Fittings (Ball, Eye, Socket, Clevis) Page 6 Section 2 – Yoke Plates Page 30 Section 3 – Hold Down Weights Page 43-44 Section 4 – Vibration Dampers Page 45-49 Section 5 – Spacer Damper Page 50-52 Section 6 – Deadend Hardware Page 53-66 Section 7 – Jumper Terminals Page 67-70

3

Section 8 – Suspension Clamp Page 71-75 Section 9 – ACSS Hardware (Dead end, Suspension clamp, splice sleeve) Page 76-87 Section 10 – Preformed Armor Rod Page 88-90 Contact Information Page 91

Table of Contents

4

Introduction

Quality first, immediate technical support, competitive price JS Hardware, founded in 1974, is the largest manufacturer of hardware and fittings for transmission lines and substations in China. All manufacturing and test is done at our 20 acre campus located in Jiangdu City which is ISO 9001 compliant. We offer a broad product line to accommodate any transmission hardware application. Among other achievements, our products have been installed on over 5000 miles of 500kV transmission line with zero failures to date. The following material is the abbreviated version of our product line. For drawings, reports or quotations, please contact your local sales representative or email to [email protected]

Best quality, excellent technical

support, competitive price

mailto:[email protected]�



5

Metal Material Standard

JS Hardware adheres to the following standards of ASTM International for all metal materials used in production of transmission hardware.

Aluminum Alloy : ASTM A356-T6

Steel: ASTM 5140

Stainless steel: ASTM 304

6

CW

L

PD

B

E

BC Ball Clevis

Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel

*) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line Ball Clevis fittings for use with ANSI C29.2 & CSA C83 insulators

52-3 and 52-5 (BC-30) 52-8 and 52-11 (BC-50)

1.2(0.55) 1.4(0.64)

1(0.45)

2(50.8)

23/32(18.3)57/64(22.6)

1-11/16 (42.9)

7/8(22.2)

15/16(23.8)

2-1/2(63.5)

3-15/16 (100)

1-9/16(39.7)

E

15/16(23.8)

CatalogNumber

UltimateStrengthLbs(kN)

Dimensions lnches(mm)

L B PD CWeightLbs(kg)

BC-30 30,000 (133)

2-15/16(74.6)

23/32(18.3)

1-11/16 (42.9)

5/8(15.9)

36,000 (160)BC-36

BC-50 50,000 (222)

1-1/8(28.6)

7/8(22.2)

2-3/16(55.5)

W

4-5/16 (110)

Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1

2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2

7

A

D

BL

W

Ball Eye

Material: Forged steel, hot dip galvanized *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line Ball Eye fittings for use with ANSI C29.2 & CSA C83 insulators 52-3 and 52-5 (BE-30) 52-8 and 52-11 (BE-50)

BE

3/4(19.1)

57/64(22.6)

23/32(18.3)

11/16(17.5)

A DIAD

50,000 (222)

30,000 (133)

1(25.4)

3-3/4 (95)BE-30

WeightLbs(kg)WBL

Dimensions lnches(mm)UltimateStrengthLbs(kN)

CatalogNumber

BE-50

1.22(0.55)1.75(0.8)

2-3/64 (52)

4-33/64 (115)

2-31/64 (63)

1-1/4 (32)

Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2

8

L

PD

A

R

C

T

Ball Y-Clevis

BYC

Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel Cotter pin: Stainless steel *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line Ball Y-Clevis fittings for use with ANSI C29.2 & CSA C83 insulators 52-3 and 52-5 (BYC-30) 52-8 and 52-11 (BYC-50)


CatalogNumber



L A R PD CWeightLbs(kg)

BYC-30 30,000 (133)

3-1/6(80.4)

1-1/2(38.1)

1/2(12.7)

1-7/8 (48)

3/4(19.1)

36,000 (160)BYC-36

BYC-50 50,000 (222)

3-1/3(85)

5/8(16)

2-3/16(55.5)

7/8(22.2)

1-9/16(40)

1-13/16 (46)

7/8(22.2)

3-15/16 (100)

5/8(16)

2-3/16(55.5)

1.94(0.88)

T

23/32(18.3)23/32(18.3)57/64(22.6)

2.80(1.27)

2.35(1.1)

9

TYPE CC TYPE CC90

W

D

BL

PDPD

D

BC

L

Clevis Clevis (Right Angle)

CC

Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel Cotter pin: Stainless steel *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line

6.0(2.72)

9/8(28.6)

1-1/4(31.8)

1-5/8(41.3)

2-1/4 (57)

2-1/4 (57)

5-1/8(130)

2(50.8)

2(50.8)

1(25.4)

1(25.4)

3/4(19.1)

4.0(1.83)

3-27/50 (115)

4.0(1.83)

3/4(19.1)

1(25.4)

1(25.4)

2(50.8)

2(50.8)

3-27/50 (115)

3.3(1.5)

7/8(22.2)

7/8(22.2)

3/4(19.1)

1-1/2 (38)

1-1/2 (38)

3-15/16 (90)

3.2(1.45)

3/4(19.1)

7/8(22.2)

7/8(22.2)

1-3/4(44.5)

1-3/4(44.5)

3-15/16 (100)

2.7(1.23)

1-3/8(34.9)

3-2/25 (78)

2.7(1.23)

5/8(15.9)

7/8(22.2)

7/8(22.2)

1-3/4(44.5)

1-3/4(44.5)

7/8(22.2)

50,000 (222)

40,000 (178)

80,000 (356)

50,000 (222)

40,000 (178)

CC-80

CC-50

CC-40

30,000 (133)

25,000 (98)30,000 (133)CC-30

7/8(22.2)

1-3/8(34.9)

5/8(15.9)

1-11/16 (42.9)

1-1/2 (38)

3-2/25 (78)CC-25

WeightLbs(kg)DWCBL


CatalogNumber

1-1/16 (27)

PD

1-9/16(39.7)

3-15/16 (100)

(15.9)

2.7(1.23)

CC-4090

CC-5090

CC-3090


10

DIA

DIA

Clevis Eye

CE


7/8(22.2)

50,000 (222)

18,000 (80)

20,000 (89)

2-1/2(63.5)

1-1/16 (27)

13/16(20.6)CE-18

WeightLbs(kg)LDBWA


CatalogNumber

1/2(12.7)

DIA

11/16(17.5)

1.6(0.73)

CE-20

CE-25

CE-25W

CE-2590

CE-30

CE-3090

CE-3590

CE-5090

CE-6090

13/16(20.6)

5/8(15.9)

1-1/16 (27)

2-1/2(63.5)

11/16(17.5)

1.67(0.76)

30,000 (133)

35,000 (156)

25,000 (111)25,000 (111)

25,000 (111)

30,000 (133)

60,000 (267)

13/16(20.6)

3/4(19.1)

1-1/16 (27)

7/8(22.2)

2-1/2(63.5)

11/16(17.5)

1.75(0.79)

13/16(20.6)

1-1/16 (27)

7/8(22.2)

2-1/2(63.5)

11/16(17.5)11/16(17.5)

7/8(22.2)

1-1/4 (32)

13/16(20.6)

1(25.4)1-3/8 (35)

1.76(0.80) 2.1(0.95)

CE-209020,000 (89)

13/16(20.6)

1-1/4 (32)

7/8(22.2)

2-5/8 (67)

11/16(17.5)

1.76(0.8)

5/8(15.9)

2-5/8 (67)

PD

5/8(15.9)

5/8(15.9) 5/8(15.9) 5/8(15.9)

5/8(15.9) 5/8(15.9) 5/8(15.9) 5/8(15.9)

3/4(19.1) 3/4(19.1)

3/4(19.1)

CE-1890 18,000 (80)

7/8(22.2)

1/2(12.7)

1-1/4 (32)

2-5/8 (67)

11/16(17.5)

5/8(15.9)

1.76(0.8)

15/16(23.8)

1-3/4(44.5)

7/8(22.2)

3-11/32 (85)

11/16(17.5)

2.53(1.15)

1(25.4)

3/4(19.1)

1-9/16 (40)

7/8(22.2)

3-11/32 (85)

11/16(17.5)

1.87(0.85)

5/8(15.9)

1(25.4)

1(25.4)

3/4(19.1)

3-1/2 (89)

1-1/2 (38)

15/16(23.8)

2.1(0.95)

7/8(22.2)

3-1/2 (89)

2-1/8 (54)

1(25.4)

1-1/16 (27)

2.82(1.28)

7/8(22.2)

1-1/2 (38)

5-1/2(140)

1-1/16 (27)

2-1/8 (54)

1-1/8(28.6)

1-1/2 (38)

3.4(1.54)

7/8(22.2)

7/8(22.2)


11

13/16 (20.6) 13/16 (20.6) 13/16 (20.6)

13/16 (20.6) 13/16 (20.6)

3/4(19.1)

3/4(19.1) 3/4(19.1)

3/4(19.1)

3/4(19.1)

13/16 (20.6)

11/16(17.5)

11/16(17.5)

11/16(17.5)

11/16(17.5)11/16(17.5)

2-7/16 (62)

1-5/8(41.3)

DIAR

20,000 (89)

2-13/16 (71.4)

1-3/8 (35)YCE-20

WeightLbs(kg)PDB L W


CatalogNumber

1.85(0.84)

5/8(15.9)

YCE-20R 5/8(15.9)

1.85(0.84)

YCE-25

YCE-25R

YCE-30

YCE-30R

YCE-40R

YCE-40

20,000 (89)25,000 (111)25,000 (111)

1-3/8 (35)

2-13/16 (71.4)

3/4(19.1)

1.90(0.86)

1-5/8(41.3)

2-7/16 (62)

3/4(19.1)

1.90(0.86)

30,000 (133)30,000 (133)

1-3/8 (35)

2-13/16 (71.4)

1(25.4)

1.95(0.88) 1.95(0.88)

11/16(17.5)

3/4(19.1)

13/16 (20.6)

1(25.4)

2-7/16 (62)

1-5/8(41.3)

40,000 (178)40,000 (178)

2-7/16 (62)

1-1/4(31.8)

13/16 (20.6)

7/8(22.2)

2.64(1.20)

1-29/50 (40)

2-7/16 (62)

1-29/50 (40)

1-3/4 (35)

13/16 (20.6)

7/8(22.2)

13/16 (20.6)

2.9(1.32)

YCE Y-Clevis Eye

Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel Cotter pin: Stainless steel Note: The difference of type YCE and YCE-R is the conductor orientation.

BD BD

LB

R

DIA

DIAW

RL

B

TYPE YCE TYPE YCE-R


12

L

WD

Material: Forged steel, hot dip galvanized *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line

Chain Link

CL

1(25.4)

60,000 (267)CL-60

1/2(12.7)

30,000 (133)CL-30

WeightLbs(kg)DL


CatalogNumber

1(25.4)

3/4(19.1)

0.5(0.23) 1.6(0.73)

W

2-1/4(57.2) 3-1/2 (89)


13

Socket Clevis

SC


1-3/16 (30)

2.0(0.91)

1.35(0.61)

CatalogNumber



CL BWeightLbs(kg)

SC-30

13/16(20.6)

2-1/8 (54)

30,000 (133)

PD

1-1/2(38)

LB

PD

C

SC-18 18,000 (80)

W

5/8(15.9)

1-15/16 (49.2)

5/8(15.9)

7/8(22.2)

2-5/8 (67)

1-5/8 (41)

5/8(15.9)

40,000 (178)SC-40

1-3/4(44.5)

SC-30L 30,000 (133)

CL

B

TYPE SC TYPE SC-L

7/8(22.2)

4-33/64 (115)

3.52(1.60)

1-3/4(44.5)

SC-50 50,000 (222)

3-9/32 (85)

2-1/16(52.4)

7/8(22.2)

2(50.8)

5.1(2.32)

1-7/16(36.5)

1-9/16(39.7)

2-1/16(52.4)

3-9/32 (85)

7/8(22.2)

2(50.8)

4.3(1.96)


14

L

W

R

DIA

Socket Eye

SE

Material: Body: Forged steel, hot dip galvanized *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line Socket Eye fittings for use with ANSI C29.2 & CSA C83 insulators 52-3 and 52-5 (SE-30) 52-8 and 52-11 (SE-50)

30,000 (133)

3.52(1.60)

11/16(17.5)

W

18,000 (80)SE-18

DIA

13/16(20.6)

1/2(12.7)

WeightLbs(kg)R


CatalogNumber

1.25(0.57)

L

SE-20 20,000 (89)

5/8(15.9)

13/16(20.6)

11/16(17.5)

1.3(0.59)

SE-30 30,000 (133)

7/8(22.2)

13/16(20.6)

1.35(0.61)

SE-30L 30,000 (133)

1(25.4)

13/16(20.6)

5-1/2(140)

1.9(0.86)

SE-30W 1-1/4(32)

3 (76)

1-3/16(30.2)

SE-50 50,000 (222)

1-1/8(28.6)

1-3/16(30.2)

5-1/2(140)

1-3/16(30.2)

5.3(2.4)

SE-50W 50,000 (222)

1-1/2(38.1)

1-1/8(28.6)

5-1/2(140)

1-3/16(30.2)

6.0(2.7)

1(25.4)

11/16(17.5)

11/16(17.5)

2-5/64(52.8)2-5/64(52.8)2-5/64 (52.8)


15

L

SS Socket Socket

Material: Body: Forged steel, hot dip galvanized

Socket Eye fittings for use with ANSI C29.2 & CSA C83 insulators 52-3 and 52-5 (SS-30)

30,000 (133)SS-30

WeightLbs(kg)


CatalogNumber

2.27(1.03)

L

2-5/64(52.8)


16

LB

45¡ ã

BD

R

Socket “Y” Clevis

SYC


Socket Eye fittings for use with ANSI C29.2 & CSA C83 insulators 52-3 and 52-5 (SYC-30) 52-8 and 52-11 (SYC-50)

7/8(22.2)SYC-50

3/4(19.1)

5.2(2.36)

3.0(1.36)

CatalogNumber


Dimensions lnches(mm) WeightLbs(kg)

2-3/4(70)

50,000 (222)

SYC-30 30,000 (133)

1-5/8 (41)

1/2(12.7)

L B R BD

1-37/64 (40)

2-61/64 (75)

7/16(11.1)


17

BL

C

R

W

ZD

T

Anchor Shackle

Material: Body: Forged steel, hot dip galvanized Cotter pin: Stainless steel *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line

U

7/8(22.2)

6.4(2.9)

9/8(28.6)

1-1/16 (27)

1(25.4)

2-3/8 (60)

27/16(42.9)

27/16(42.9)

5.9(2.7)

1-7/8(47.6)

7/8(22.2)

3/4(19.1)

3/4(19.1)

3/4(19.1)

1-7/8(47.6)

7/8(22.2)

7/8(22.2)

2.4(1.1)

4.2(1.9)

1(25.4)

1-1/8(28.6)

7/8(22.2)

2-1/2 (54)

1-7/16 (36.5)

7/8(22.2)

2.75(1.25)

3/4(19.1)

3/4(19.1)

3/4(19.1)

7/8(22.2)

2.5(1.13)

1-1/4(31.8)

1.65(0.75)

5/8(15.9

1-11/16 (42.9)

0.7(0.32) 0.95(0.43) 1.45(0.66)

5/8(15.9)

5/8(15.9)

5/8(15.9)

5/8(15.9)

1-3/8(34.9)

1(25.4)

1-1/16 (27)

5-29/32 (150)

100,000 (445)U-100(W)

9/8(28.6)

2-3/8 (60)

1(25.4)

1(25.4)

4-21/64 (110)

100,000 (445)

U-100

3-3/4(95)

80,000 (356)

1-15/16 (49.2)

5(127)

60,000 (267)

3-1/2(90)

60,000 (267)

U-50(W) 50,000 (222)

3/4(19.1)

7/8(22.2)

1(25.4)

3-9/16(90)

3/4(19.1)

1-1/16 (27)

3/4(19.1)

11/16(17.5)

40,000 (178)

2-3/4(70)

1-11/16 (42.9)

1(25.4)

1-3/4(44.5)

2-61/64 (75)

30,000 (133)

U-80(W)

U-60L

U-60

U-35(40)

U-30L

21/32(16.7)

1/2(12.7)

5/8(15.9)

7/8(22.2)

2-3/4 (70)

30,000 (133)U-30

5/8(15.9)

5/8(15.9)

1-3/8(34.9)

1/2(12.7)

11/16(17.5)

7/8(22.2)

2-3/8 (60)

25,000 (98)U-25

WeightLbs(kg)ZDC TB RWL


CatalogNumber


18

A

L

W

B

PD

S DIA

T

Hot Line Ball Clevis

Ball Clevis fittings for use with ANSI C29.2 & CSA C83 insulators 52-3 and 52-5 (HBC-30) 52-8 and 52-11 (HBC-50)

HBC


7/8(22.2)

3.52(1.6)

2.42(1.1)

7/8(22.2)

15/16(23.8)

CatalogNumber



L A B W PD S DIA T DIAWeightLbs(kg)

9-7/16 (240)

1-3/4(44.5)

5-7/8(148)

5/8(15.9)

7/8(22.2)

23/32(18.3)

15/16(23.8)

30,000 (133)

10-3/64 (255)

1-27/32 (46.8)

57/64(22.6)

5-13/32(137.3)

50,000 (222)HBC-50

HBC-30


19

PD

S DIAB

W

LW

TYPE HCC TYPE HCC90

HCC Hot Line, Clevis Clevis

Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel Cotter pin: Stainless steel

1(25.4)

2(50.8)

3.38(1.53)

5/8(15.9)

7/8(22.2)

1-21/32 (42)

5-29/32 (150)

10(254)

4.5(2.0)

3/4(19.1)

9/8(28.6)

1-1/16 (27)

9-21/32 (245.3)

14-61/64 (380)

40,000 (178)

D

30,000 (133)

30,000 (133)

1-21/32 (42)

7/8(22.2)

5/8(15.9)

1(25.4)

5-29/32 (150)

10(254)

WeightLbs(kg)S DIA PDWBL


CatalogNumber

3.38(1.53)HCC-30

HCC-40

HCC-3090


20

HCE Hot Line, Clevis Eye


7/8(22.2)

7/8(22.2)

1(25.4)

10(254)

2.4(1.1)

7/8(22.2)

5/8(15.9)

11/16(17.5)

7/8(22.2)

5/8(15.9)

13/16(20.6)

2-61/64 (75)

7-3/32 (180)

30,000 (133)

3.63(1.65)

1-1/8(28.6)

3/4(19.1)

1-13/64(30.55)

1-1/4(31.8)

1-1/4(31.8)

7/8(22.2)

5-29/32 (150)

11-1/64 (280)

2.7(1.2)

5/8(15.9)

11/16(17.5)

7/8(22.2)

5/8(15.9)

5-29/32 (150)

30,000 (133)40,000 (178)

5-29/32 (150)

S DIAPDB

30,000 (133)

5/8(15.9)

5/8(15.9)

11/16(17.5)

7/8(22.2)

1(25.4)

10(254)

WeightLbs(kg) IRWDL


CatalogNumber

2.7(1.2)

HCE-30S

HCE-30

HCE-3090

HCE-40

L

D

R

S DIA S DIA

PD

W

PD

D

TYPE HCE TYPE HCE90


21

A

L

W

45¡ ãA

TYPE HCYC TYPE HCYC90

HCYC-3090

A

30,000 (133)

30,000 (133)

7/8(22.2)

5/8(15.9)

1(25.4)

6-19/64 (160)

10-7/16 (265)HCYC-30

WeightLbs(kg)S DIA PDWBL


CatalogNumber

3.63(1.65)

B

PD

S DIA

1-37/64 (40)

BD

3/4(19.1)

3.63(1.65)

3/4(19.1)

5/8(15.9)

7/8(22.2)

1-37/64 (40)

6-19/64 (160)

10-7/16 (265)

1(25.4)

Hot Line, Clevis “Y” Clevis


HCYC


22

T DIA

C

S DIA

L

W

A DIA

HEB

Material: Body: Forged steel, hot dip galvanized *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line

Ball Eye fittings for use with ANSI C29.2 & CSA C83 insulators 52-3 and 52-5 (HEB-30) 52-8 and 52-11 (HEB-50)

1-3/16 (30)

1-3/16 (30)

50,000 (222)HEB-50 3/4

(19.1)

1(25.4)

T DIAW

30,000 (133)

7/8(22.2)

23/32(18.3)

11-1/64 (279.8)

2(50.8)

11/16(17.5)HEB-30

WeightLbs(kg)S DIALBA


CatalogNumber

2.33(1.05)1.75(0.79)

1-1/4 (32)

2-1/2(63.5)

4-23/32 (119.8)


Hot Line, Ball Eye

23

C

S DIA

D

S DIAB

A

R

TW

C

L

TYPE HEPE TYPE HEPE90

HEPE Hot Line Eye Pad Eye

Material: Body: Forged steel, hot dip galvanized

1 (25.4)

2.8(1.27)

CatalogNumber



L B C TWWeightLbs(kg)

12(305)

7-5/64 (180)

2-1/8 (54)

23/32(18.3)

15/16(23.8)

30,000 (133)30,000 (133)

R

7/8(22.2)

S DIA

7/8(22.2)

11/16(17.5)

D

11/16(17.5)

A

5/8(15.9) 5/8(15.9)

12(305)

7-5/64 (180)

2-1/8 (54)

1 (25.4)

15/16(23.8)

23/32(18.3)

2.8(1.27)

HEPE-30

HEPE-3090


24

HSC Hot Line Socket Clevis


Socket Clevis fittings for use with ANSI C29.2 & CSA C83 insulators 52-3 and 52-5 (HSC-30) 52-8 and 52-11 (HSC-50)

S DIA

B

PD

W

C

L

2.97(1.35)

1-3/16 (30)

7/8(22.2)

2(50.8)

6-13/16 (173)

6-3/16(157.2)

7/8(22.2)

5/8(15.9)

1(25.4)

1-1/2 (38)

9-27/32 (250)

30,000 (133)50,000 (222)

11-1/64 (279.8)

6.6(3.0)

15/16(23.8)

7/8(22.2)

PD

2.86(1.3)

CatalogNumber



CBL S DIAWeightLbs(kg)

8-1/4 (209.6)

4-5/8 (117.5)

1-1/2 (38)

5/8(15.9)

30,000 (133)

W

1(25.4)HSC-30

HSC-30L

HSC-50


25

Hot Line Socket Eye

HSE

Material: Body: Forged steel, hot dip galvanized *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line

Socket Eye fittings for use with ANSI C29.2 & CSA C83 insulators 52-3 and 52-5 (HSE-30) 52-8 and 52-11 (HSE-50)

1-3/16 (30)

2(50.8)

6-1/2(165)HSE-50 50,000

(222)1-11/32 (34)

7/8(22.2)

CatalogNumber



RBL S DIA

HSE-30 10 (254)

6-1/4(159)

30,000 (133)

W

L B

S DIA

W

R

3/4(19.1)

7/8(22.2)

10 (254)

DIA

5.1(2.3)

2.86(1.3)

WeightLbs(kg)DIA

1-1/16 (27.1)

11/16 (17.5)


26

L B S DIA

C

PD

45¡ ã

HSYC Hot Line Socket Y-Clevis


Socket Y-Clevis fittings for use with ANSI C29.2 & CSA C83 insulators 52-3 and 52-5 (HSYC-30) 52-8 and 52-11 (HSYC-50)

7/8(22.2

7/8(22.2)1-3/16 (30)

1-21/32 (42)

5-29/32 (150)HSYC-50 50,000

(222)7.36(3.34)

3.52(1.6)

CatalogNumber




HSYC-30 9-21/32 (245.3)

6 (152.4)

30,000 (133)

PD

3/4(19.1)

1-19/32 (40.5)

10-1/4 (260.3)


27

T DIA

S DIA

45¡ ã

PD

C

L B

HBYC Hot Line Ball Y-Clevis


Ball Y-Clevis fittings for use with ANSI C29.2 insulators 52-3 and 52-5 (HBYC-30) 52-8 and 52-11 (HBYC-50)

57/64(22.6)

7/8(22.2)

7/8(22.2)

6-13/16 (173)

11-1/64 (279.8)

23/32(18.3)

7/8(22.2)

T DIA

HBYC-50

1-1/2 (38)

3/4(19.1)

PD

30,000 (133)

5-3/8(136.5)

9-1/4 (235)HBYC-30

WeightLbs(kg)S DIAL B C


CatalogNumber

2.7(1.23)4.42(2.0)

50,000 (222)

1-21/32 (42)


28

W

3-1/4(82.6)

B

15,000 (67)

15/16(23.8)

7-7/8(200)HYCE-15

S DIAL R


CatalogNumber

S DIA

45¡ ã

BD

C

L B

TYPE HYCE TYPE HYCE90

WeightLbs(kg)

3.0(1.36)

R

DIA BD C

HYCE-1590

50,000 (222)

15,000 (67)

5/8(15.9

11/16(17.5)

1/2(12.7)

3/4(19.1)

w

3.0(1.36)

1/2(12.7)

11/16(17.5)

3-1/4(82.6)

5/8(15.9)

15/16(23.8)

7-7/8(200)

HYCE-30

HYCE-3090

30,000 (133)

11-1/64 (279.8)

15/16(23.8)

15/16(23.8)

7/8(22.2) 7/8(22.2)

6-3/8(162)6-3/8(162)

11/16(17.5

11/16(17.5)

5/8(15.9) 5/8(15.9)

11-1/64 (279.8)

4.2(1.90) 4.2(1.90)

30,000 (133)

HYCE-4090

HYCE-40

40,000 (178)

40,000 (178)

11-1/64 (279.8)

11-1/64 (279.8)

1-1/32(26.2)1-1/32(26.2)

1-1/8(28.6)1-1/8(28.6)

6-5/8(168)6-5/8(168)

13/16(20.6)13/16(20.6)

25/32(19.8)25/32(19.8)

7/8(22.2)

1-9/16 (39.7)

7/8(22.2)

1-1/4(31.8)

6-5/8(168)

12-13/32 (315.1)

DIA

1-3/16 (30)

2(50.8)

1-1/4(31.8)HYCE-50

4.85(2.2)4.85(2.2)5.85(2.65)

3/4(19.1)

3/4(19.1)

3/4(19.1)

7/8(22.2) 7/8(22.2)

1-9/16 (39.7)

1-9/16 (39.7)1-9/16 (39.7)

1-9/16 (39.7)1-9/16 (39.7)

HYCE Hot Line Y-Clevis Eye



29

BL

C

45¡ ã

S DIA

45¡ ã

BD

9/8(28.6)

10-1/8(257)

15(381)

2(50.8)

1-37/64 (40)

50,000 (222)

8.77(3.98)

4.3(2.0)

CatalogNumber




HYYC-30 15(381)

10-3/8(264)

30,000 (133)

BD

3/4(19.1)

HYYC-50

7/8(22.2)

7/8(22.2)

HYYC Hot Line Y-Y-Clevis



30

5''(127) 3/4''L1

L2

L3 L4L5

L6

YA-40(40,000 LBS) type yoke plates may be furnished in a verity of sizes, and the dimensions and strength rating can be specified by customer.

Adjustable Yoke Plate

YA

Material: Steel, galvanized

31

E

H

W

0.63

''

YB Yoke Plates

Material: Body:356-T6 aluminum alloy Clevis Pin: galvanized steel Cotter Pin: stainless steel

Catalog number

Ultimate Strength Lbs (kN) Dimension inches (mm) Weight lbs (kg)

E H W

YB-15 15,000(67) 12(305) 2.63(69.9) 1.19(30.2) 1.8(0.82)

YB-15R 15,000(67) 12(305) 2.63(69.9) 1.19(30.2) 2.25 (1.02)

YB-30 30,000(133) 12(305) 3.5(88.9) 1.75(44.5) 3.2(1.4)

YB-30R 30,000(133) 12(305) 3.5(88.9) 1.75(44.5) 3.53 (1.6)

Note: YB series are only with pin.

YB-R series are with bolt, nut and pin.

32

YT Yoke Plates


9''(228.5) 9''(228.5)

50¡ ã 50¡ ã

6- Holes Dia.1.25''(32)

18''(4

57)

3/4 THICK

YT7-40(40,000 LBS) type yoke plates may be furnished in a verity of sizes, and the dimensions and strength rating can be specified by customer.

33

4-A

L

H

40,000 (178)

YC4-40

WeightLbs(kg)B L A


CatalogNumber

9(228.5)

1-1/4(32)

3/4(19.1)

L

5.25 (133)

3-3/4 (95)

L

3/4(19.1)

1-1/4(32)

18(457)

CatalogNumber



ALBWeightLbs(kg)

YC5-50 50,000 (222)

H

72¡ ã

L

5-A

45¡ã

H

12.3(5.6)

B

B

5-A

H

L

78¡ ã 23¡ ã

H

30,000 (133)

YC5-30

WeightLbs(kg)B L A


CatalogNumber

9(228.5)

1-1/4(32)

3/4(19.1)

L

6-22/25 (175)

12.7(6.2)

B

13.2(6.0)

YC Yoke Plates

Material: Steel, galvanized Contact JS Hardware if additional holes required

34

45¡ ã 45¡ ã

4(102)

5 (127)

3/4(19.1)

H

30,000 (133)

YV9-30

WeightLbs(kg)B L A1


CatalogNumber

18(457)

a

a

5-A1

1-1/4(32)

1-1/4(32)

5-A

a

18(457)

CatalogNumber



ALB

YV5-40 40,000 (178)

H

3/4(19.1)

5 (127)

3 1/2 (89)

45¡ ã45¡ ã

L

H

4-A2

A2

1/2(12.7)

12.6(5.7)

(12.1)

L

H

B

B

b

WeightLbs(kg)

3 1/2 26.73

b

YV Yoke Plates


35

YR Yoke Plates


A22

18(457)

H

CatalogNumber



A11LBWeightLbs(kg)

YR8-40 40,000 (178)

H

5.5(140)

3/4(19.1)

1-3/16 (30)

1-1/16 (27)

4-A2

3/4(19.1)

5.5(140)

H

50,000 (222)

YR7-50

WeightLbs(kg)B L A11


CatalogNumber

L

18(457)

A22

15/16(24)

13/16(20.6)

B

B

4-A2

3-A1

33.0 (15)

31.3(14.2)

36

L

H

5-A

1(25.4)

CatalogNumber



ALBWeightLbs(kg)

YR5-30 3/4(19.1)

13(330)

30,000 (133)

H

4.5(114.3)

6(152)

H

30,000 (133)

5/8(16)

YR6-30



CatalogNumber

11/16(17.5)

H

L

18(457)

2-A1

4-A2

15/16(24)

A22

B

B

10.57(4.8)

28.4(12.9)

YR Yoke Plates


37

L

H

3-A2

A1

B

B

A1

3-A2

H

L

b

26.0(11.8)

22.7 (10.3)

b

1-5/16 (33)

WeightLbs(kg)

CatalogNumber



A1LBWeightLbs(kg)

YD4-100 7/8(22.2)

100,000 (445)

H

6-1/8(156)

A22

18(457)

1-1/16 (27)

15/16 (24)

15/16 (24)

1-1/16 (27)

18(457)

A2

6-1/8(156)

H

90,000 (400)

3/4(19.1)

YD4-90

B L A1


CatalogNumber

YD Yoke Plates


38

2-A2

L

H

A1

B

2-A3

b

2-A2

B

3-A1

H

L

b

23.6(10.7)

18.3(8.3)

1-5/16 (33)

bWeightLbs(kg)

1-1/4(32)

5(127)

H

YD5-80 80,000 (356)

CatalogNumber



A11LB

3/4(19.1)

A22

18(457)

1(25.4)

WeightLbs(kg)b

1-5/16 (33)

1-1/16 (27)

15/16(24)

A3

4(101.6)

18(457)

A2 H

3/4(19.1)

B L A11


CatalogNumber

72,000 (320)

YD5-72 1-1/4(32)

YD


Yoke Plates

39

B

A1

2-A2

H

L

L1

2-A2

L

H

A1

B

2-A3

b

21.1(9.6)

11.0(5.0)

5(127)

H

WeightLbs(kg)

1-1/8(28.6)

b

1-1/8(28.6)

1-1/4(32)

A3

18(457)

A2

3/4(19.1)

B L A1


CatalogNumber

1-3/16 (30)

60,000 (267)

YD5-60

L1

6(152.4)

15/16(24)

CatalogNumber



A11LBWeightLbs(kg)

YD3-60 3/4(19.1)

13(330)

60,000 (267)

H

3.44(87)

A2

13/16(20.6)

YD


Yoke Plates

40

B

4-A

H

L

B

A1

H

L

4-A2

L1

21.6(9.8)

6(152.4)

L1

1-1/4(32)

YD5-50 50,000 (222)

1-1/8(28.6)

CatalogNumber



A11LBWeightLbs(kg)

3/4(19.1)

HA2

18(457)

5(127)

4(101.6)

H

50,000 (222)

8(203)

3/4(19.1)

YD4-50

WeightLbs(kg)B L A


CatalogNumber

7.35(3.3)

1-1/4(32)

YD Yoke Plates


41

5-A

L

H

2-A2

A1

B

LL1

h

H

B

2-5/8 (67)

h

1-1/4(32)

12.99(5.9)

CatalogNumber



ALBWeightLbs(kg)

YD5-40 3/4(19.1)

18(457)

40,000 (178)

H

3-5/8 (92)

L1

6(152.4)

11/16(17.5)

A2

3-11/16(93.7)

H

40,000 (178)

13(330)

3/4(19.1)

YD3-40



CatalogNumber

6.186(2.8)

1-1/4(32)

YD


Yoke Plates

42

L

5-DIA

B

HH

BL

4-DIA

3-5/8(92)

H

30,000 (133)

18(457)

3/4(19.1)

YD5-30

WeightLbs(kg)B L DIA


CatalogNumber

1-1/4(32)

1-1/4(32)

CatalogNumber



DIALBWeightLbs(kg)

YD4-30 3/4(19.1)

9(228.6)

30,000 (133)

H

6(152.4)

7.35(3.3)

12.35(5.6)

YD


Yoke Plates

43

5''

B

C

9''

9''

13/1

6''

1-5/

8''

ZC Hold Down Weight

Material: Ductile Iron, galvanized

50(22.7)

1-1/8(28.6)

2-5/8(66.7)

WEIGHT

ZC-1

DIMENSIONS IN(mm)CatalogNumber B C

LBS(KGS)

Note: The bolt number are determined by the quantity of Hold down weight.

44

B

L

4''3.5'' 3.5''

2.75

''

0.75

''DIA

c

ZG Hold Down Weight

Material: Ductile iron, galvanized

2-1/2(63.5)

CBL

CatalogNumber

DIMENSIONS IN(mm)

ZG-1

WEIGHT LBS(KGS)

8-5/8(219)

5/8(16)

50(22.7)

ZG-2 6-7/8(175)

4-3/4(120.7)

1(25.4)

75(34)

45

L

H

C

FR Vibration Dampers

Material: Damper: Ductile Iron Hardware: Aluminum Alloy Clamp & Keeper: Aluminum Alloy

CABLE DIA.RANGE

22.7(10.3)

16(7.3)

3.1(1.4)11.1(282)0.250-0.438

NET WEIGHT LBS(KGS)

FR-1

DIMENSIONS IN(mm)

(IN)CatalogNumber

0.439-0.858

1.131-1.425

1.426-1.770

(mm) L H C

6.35-11.12

11.12-21.8 16.1(409)

2.38(60)

2.75(70)

1.57(40)

1.77(45) 5.2(2.4)

0.859-1.130 21.8-28.7 20(508) 2.95(75) 2.26(60)

28.7-36.2 21.9(560) 3.74(95) 2.82(72)

36.2-44.9 24(610) 5.9(150) 3.54(90)

FR-2

FR-3

FR-4

FR-5

5.2(2.4)

46

FR Damper Installation Instructions FR1

47

FR

Damper Installation Instructions FR2

48

FR


49

FR


50

L

13''or 18''

13''or 18''

13''or 18''

13''or 18''

13''or 18''

13''or 18''

13''or 18''

13''or 18''

13''or 18''

13''or 18''

13''or 18''

1.618-1.776 (41-45)SD2X41-45

1.500-1.618 (38-41)SD2X38-41

1.382-1.500 (35-38)SD2X35-38

SD2X33-35 1.303-1.382 (33-35)

1.224-1.303 (31-33)SD2X31-33

1.146-1.224 (29-31)SD2X29-31

0.753-0.831 (19-21)SD2X19-21

SD2X26-29 1.028-1.185 (26-29)

SD2X23-26

SD2X21-23

0.910-1.028 (23-26)

0.832-0.910 (21-23)

0.673-0.753 (17-19)

INCHES(mm)CatalogNumber

Dimensions lnches

L

SD2X17-19

Spacer Damper – 2 Conductor Bundle

SD2

Material: Body and Clamps: Aluminum Alloy Dampers: Elastomer Hardware: Galvanized Steel

51

UP

L1L1

SD3 Spacer Damper – 3 Conductor Bundle

Material: Body and Keeper: Aluminum Alloy Dampers: Elastomer Hardware: Galvanized Steel

13'' or 18''

Dimensions lnches

L1

SD317-19-X

CatalogNumber INCHES(mm)

0.673-0.753 (17-19)

0.832-0.910 (21-23)0.910-1.028 (23-26)

SD321-23-X

SD323-26-X

1.028-1.185 (26-29)SD326-29-X

SD319-21-X 0.753-0.831 (19-21)

SD329-31X 1.146-1.224 (29-31)

SD331-33-X 1.224-1.303 (31-33)1.303-1.382 (33-35)SD333-35-X

SD335-38-X 1.382-1.500 (35-38)

SD338-41-X 1.500-1.618 (38-41)

SD341-45-X 1.618-1.776 (41-45)

13'' or 18''

13'' or 18''

13'' or 18''

13'' or 18''

13'' or 18''

13'' or 18''

13'' or 18''

13'' or 18''

13'' or 18''

13'' or 18''

52

L1

L2

13''or 18''

13''or 18'' 13''or 18''

13''or 18'' 13''or 18''

13''or 18'' 13''or 18''

13''or 18'' 13''or 18''

13''or 18'' 13''or 18''

13''or 18'' 13''or 18''

13''or 18'' 13''or 18''

13''or 18'' 13''or 18''

13''or 18'' 13''or 18''

13''or 18'' 13''or 18''

L2(Y)

1.618-1.776 (41-45)SD4XY41-45

1.500-1.618 (38-41)SD4XY38-41

1.382-1.500 (35-38)SD4XY35-38

SD4XY33-35 1.303-1.382 (33-35)

1.224-1.303 (31-33)SD4XY31-33

1.146-1.224 (29-31)SD4XY29-31

0.753-0.831 (19-21)SD4XY19-21

SD4XY26-29 1.028-1.185 (26-29)

SD4XY23-26

SD4XY21-23

0.910-1.028 (23-26)

0.832-0.910 (21-23)

0.673-0.753 (17-19)

INCHES(mm)CatalogNumber

Dimensions lnches

L1(X)

SD4XY17-19 13''or 18''

Spacer Damper – 4 Conductor Bundle, 13”

SD4

Material: Body and Clamps: Aluminum Alloy Dampers: Elastomer Hardware: Galvanized Steel

53

12(50)(10) (25)(336)18/1 (17.4) (50)

DCDT-20812 336.4

556.5

556.5

397.5

397.5

336.4

336.4

397.5

DCDT-21023

DCST-21024

DCDT-21122

DCDT-210211

DCDT-20920

DCDT-21018

DCDT-20919

DCST-10917

DCDT-20815

DCDT-20914

DCDT-20813

20.52 1 2 140.846

(50)

(50)

(50)

(50)

(50)

(378)18/1 (22.3)

24/7 0.914(23.2)

14.9(378)

2

(21.8)

477 30/7 (22.4)0.879

0.883

477 26/7

477 24/7

0.858(21.5)

(378)

(413)14.9

16.3

2

2

14.9(356)

2

60(50)(13) (25)

0.52(13)

1 (25)

2(50)

60

(50) (25) (13)

0.52(15)0.62

(25) 1

1(101.5)

2

4

0.52(13)

1 (25)

2(50)

60

60

12

(50)

(50)

(50)

(50)

(50)

(50)

(336)(18.9)

30/7 (20.5)

18/1477 0.814(20.7)

26/7 (19.9)0.806

0.783

(378) 14(356)

2

(356)14.9

14

2

2

0.741

18/1

30/7

0.743(18.8)

26/7 0.72(18.3)

213.2

13.2(336)

2

13.2(336)

2

(50) (25) (10)

(50)(13) (25)0.52(13)

1 (25)

2(50)

0.52(13)0.52

(25) 1

1(50) 2

2

60

12

12

20.41 1

0.41(10)

1 (25)

2(50)

0.41(10)

1 (25)

2(50)

12

12

12

KCMIL

266.8

B

DCDT-20710

CatalogNumber

1.75

''(44

)

(50)

DIAMETEROUTSIDE

IN(mm)

26/7 (16.3)0.684

0.642

STRANDING AL/ST IN(mm)

(310)13.2

12.2

2

2

COMPRESSIONLENGTH BEFORE

A

0.41(10)0.41

(25) 1

1(50) 2

2


B C L (TONS)

12

PRESS SIZE MINIMUM

A

C1.75''(44)L0.56''(14)DIA.BOLT HOLES

DCDT Deadends

Material: Body: Seamless Extruded Aluminum Alloy Tube Eye: Galvanized Steel Forged Terminal: Seamless extruded Aluminum Alloy Tube Hardware: Stainless Steel For ACSR Conductors

54

DCDT Deadends

0.56''(14)DIA.BOLT HOLES

1.75

''(44

)

1.75''(44)

(50)

A

(50)

(50)

(50)

(50)

(50)

(50)

(50)

(50)

(50)

2(50) 2(50) 2(50) 2

666.6

666.6

715.5

715.5

DCDT-21138

DCDT-21239

DCDT-21136

DCDT-21137

DCDT-21234

24/7 1.036 16.3

(26.7)

(26.3)1.05126/7 17.2

(436)

(413)

(25.4)1.014(25.8)

24/7

26/7

30/19636.0(25.9) 1

1.019

(413)

(413)16.3

(436)16.3

17.2 2

216.30.95330/7556.5DCDT-21126

DCDT-21030

DCDT-21132

DCDT-21133

DCDT-21031

DCST-21128

DCDT-21127

(378)(23.6)36/1636.0

0.97724/7636.0

636.0 26/7 0.99(25.1)

(24.8)

18/1636.0(23.9)0.93

216.3

16.3(413)

(413) 2

(378)14.9 2

605.0 26/7 (24.5)0.93

0.966

605.0 24/7 0.953(24.2)

(24.2)

(413)14.9

16.3

2

2

16.3(413)

(413) 2

KCMIL

DCDT-21025

CatalogNumber DIAMETER

OUTSIDE

AL/ST

26/7556.5(23.5)0.927

STRANDING

IN(mm)

(378)14.9 2


B

LC

A

60 1 0.62 3

1 (25)

(25)0.62 3(15) (76)

(15) (76)

60

(25) (15) (76)

(25) 1

(15) (76)0.62 3

(25) 1

1 (76)(15)

0.62 3

0.62 3

60

60

60

4 600.62 1

(50)60

(25) (13)

30.62 1

1 (25)

(25) 30.62

(15) (76)

(15) (76)

(25) 1

(13) (50)0.52 2

60

60

60

(101.5)

(101.5)

(101.5)

(25) 1

1(15)0.52 2

0.62 4

1 (25)

(25) 40.62

(15)

(15)

60

60

LCB

(25) 1

(13) (50)0.52 2


(TONS)

60

PRESS SIZE MINIMUM

IN(mm)


55

DCDT Deadends

L 1.75''(44)

(32)

1.19654/7954.0DCDT-213511

DCDT-21455

DCDT-21454

1113.0

1033.5

DCDT-21353 1033.5

45/7

54/7 (31.6)1.259

1.245

45/7 1.212(30.8)

(30.4)

DCDT-21350 954.0

DCDT-21348

DCDT-21247

900.0

900.0

(29.5)

45/7 (29.6)1.165

54/7

45/7 (28.7)1.162

1.131

(76)(19)(63)(522) (30)

30.782.519.6 1.2 (30) 1.2

(30) 1.2

1.2 (30)(522)

20.6

20.6(63)2.5

2.5

19.6(496)

(496)2.5(63)

(63)

(19)0.78

0.78 (76) 3

3

0.78(19)

(19) 3 (76)

(76)

1 (25) 1.2 (30)

(30) 1.2

(63)(496)

(496)19.6

(63)2.5

(436)19.6

17.2(50)2.5

2

(76)(19)

(19)0.78

(76) 3

(15)0.78

0.62 (76) 3

3

60

60

60

60

60

60

60


DIAMETERKCMILNumber

(27.7)

795.0DCDT-212451

DCDT-21346 795.0

DCDT-212441 795.0

1.10826/7

30/19 1.14(30)

(28.1)

54/7 (27.7)1.092

DCDT-212431

DCDT-21242

795.0

795.0

DCDT-21141 795.0

24/7

45/7 (27.0)1.092

1.063

IN(mm)

36/1

AL/ST

1.040(26.4)

STRANDINGCatalog OUTSIDEPRESS SIZE (TONS)

(76)(15)(50)(436) (25) 1 (25) 1 (25) 1.2 (30)

217.2

19.6(496)

(436)2.5(63)

(50)

(436)17.2

(50) 2

30.62

0.78(19)

(15) 3 (76)

(76)

(15)0.62

(76) 3

1 (25) 1

1 (25)(436)

17.2

17.2(50) 2

2

16.3(413)

IN(mm) 2(50)

A

(15)0.62

0.62 (76) 3

3

0.62(15)

B C

3 (76)

L

60

60

60

60

60

60


MINIMUM

1.75

''(44

)


B

A

C


56

(101)(23) (30)(63)(621)(40.7)

DCDT-22075

DCDT-21974

76/19

76/19

2515.0

2312.0

DCDT-21973

DCDT-21972

DCDT-21871

84/192156.0

72/72167.0

72/72034.5

1.1 1.53.025.31.802

(729)(45.9)1.808(45.8)

28.7(643)

(27) (38)(76)

IN(mm)

1.5 (38)

3.0(76)

1.1(27)

25.31.762

1.735(44.1)

(44.8)25.3(643)

(643)

(42.7)1.681

(643)25.3

1.1 1.53.0

(38) 1.5 (38)

3.0(76)

(76)1.1(27)

(27)

(30) 1.2

(63)2.5

(23)0.94

4

(101) 4(101)

100

100

100 4

4(101)

(101)

100

(101) 4 100


0.78 1.22.521.51.386

DCDT-21664 1431.0 54/19

DCDT-21769

DCDT-217681

DCDT-21667

84/19

54/19

1780.0

1590.0

45/71590.0

DCDT-21663

DCDT-21562

DCDT-21561

45/71431.0

54/19

45/7

1351.5

1351.5

1.465 23.5 2.5 1.2 0.94

24.41.545

1.602(39.2)

24.4(621)

1.504(38.2)

(37.2)23.5(596)

(596)

0.94 1.22.5

1.2 (30)

2.5(63)

0.94(23)

(30) 1.2 (30)

2.5(63)

(63)0.94(23)

(23)

(545)(36.2)

(36.2)1.427

(596)23.5

1.424(35.2)

21.5(545)

(19) (30)(63)

(30) 1.2

(63)2.5

(23)0.94

1.2 (30)

2.5(63)

0.78(19)

DIAMETEROUTSIDE

DCDT-21560

DCDT-215591

DCDT-21558

45/71272.0

54/191272.0

54/191192.5

DCDT-21457

DCDT-21456

NumberCatalog

45/7

54/19

1192.5

1113.0

AL/STSTRANDINGKCMIL

(19) (30)(63)(522)(33.1)

21.51.345

1.382(35.1)

(34.1)21.5(545)

(545)

(34)1.338

(545)21.5

0.78 1.22.5

(30) 1.2 (30)

2.5(63)

(63)0.78(19)

(19)

(30) 1.2

(63)2.5

(19)0.78


20.61.293

1.302(32.8)

20.6(522)

0.78 1.22.5

1.2 (30)

2.5(63)

0.78(19)

A B C

3

3 60

4

4(101)

60

60

3 (76)

(76)

60

(76)

(76) 3 60

3 (76)

60

60

(76)

60 3

3 (76)

(76)

60

(76) 3 60

3

3 (76)

60

60

(TONS)PRESS SIZE MINIMUM

L


B

C

1.75

''(44

)

1.75''(44)L

A

IN(mm)

DCDT Deadends


57

DCAC Deadends

2(50) 2(50)

3 (76)

3 (76)

3 (76)

3 (76)

0.75(19)

0.75(19)

1 (25)

1 (25)

1 (25)

0.75(19)

0.75(19)

0.75(19)

2.8(71)2.8(71)

3.5(88)

3.5(88)

3.5(88)

2.8(71)

2.8(71)

2.8(71)

1.1 (28) 1.1 (28)

1.4 (35)

1.4 (35)

1.4 (35)

1.1 (28)

1.1 (28) 1.1 (28)

1.7(43)

1.7(43)

2.4(61)

2.4(61)

2.4(61)

1.7(43)

1.7(43)

1.7(43)

1 (25)

3.5(88)

1.4 (35)

2.4(61)

2(50) 2(50)

2(50) 2(50) 2(50) 2(50)

2(50)

2(50) 2(50)

2(50)

2(50)

2(50)

L

2.8(71)

0.75(19)

0.62(16)

0.62(16)

0.75(19)

0.62(16)0.62(16)

0.62(16)

2.9(73)2.9(73)2.9(73)

2.9(73)2.9(73)

2.9(73)

2.9(73)

1.1 (28) 1.1 (28)

1.1 (28)

1.1 (28)

1.1 (28) 1.1 (28)

1.1 (28)

1.7(43)

1.7(43)1.7(43)1.7(43)

1.7(43)1.7(43)

1.7(43)

0.62(16)

1.1 (28)

1.7(43)

DCAC-91031

DCAC-91030

DCAC-91128

DCAC-91127

DCAC-91126

DCAC-91025

DCAC-91024

DCAC-91023

DCAC-91122

DCAC-910211

DCAC-91020

DCAC-91019

DCAC-91018

DCAC-90817

DCAC-90815

DCAC-90814

DCAC-90813

B

LENGTH BEFORECOMPRESSION

IN(mm)

CatalogNumber

OUTSIDEDIAMETER IN(mm)


A MAXADJUST

DCAC-90812

MINIMUMPRESS SIZE (TONS)

0.684(17.4)

19.3(491)

1.7(43)

1.1 (28)

2.9(73)

13.2(336)

0.72(18.3)

STRANDING AL/ST

KCMIL

18/1336.4

336.4 26/7

336.4 30/7 0.741(18.8)

13.2(336)13.2(336)

0.743(18.9)18/1397.5

397.5 26/7 0.783(19.9)

14(356)

397.5 30/7 0.806(20.5)

14.9(378)

477 18/1 0.814(20.7)

14(356)

477 24/7 0.846(21.5)

14(356)

477 26/7 0.858(21.8)

14.9(378)

477 30/7 0.883(22.4)

16.3(413)

556.5 18/1 0.879(22.3)

14.9(378)

556.5 24/7 0.914(23.2)

14.9(378)

556.5 26/7 0.927(23.5)

14.9(378)

556.5 30/7 0.953(24.2)

16.3(413)

605.0 24/7 0.953(24.2)

16.3(413)

605.0 26/7 0.966(24.5)

16.3(413)

636.0 36/1 0.93(23.6)

14.9(378)

636.0 18/1

DIA

12

12

12

12

12

60

12

12

60

60

60

60

60

60

60

60

60

60

0.62(16)

0.94(23.9)

14.9(378)

1.75'' 44L

1.75

''(44

)

A

DIAMAMENTX ADJUST


B


58

3 (76)

3 (76)

3 (76)

1 (25)

1 (25)

1 (25)

3.5(88)

3.5(88)

3.5(88)

1.4 (35)

1.4 (35)

1.4 (35)

2.4(61)

2.4(61)

2.4(61)

DCAC-91234

DCAC-91133

DCAC-91132

60

60

60636.0 24/7 0.977(24.8)

16.3(413)

636.0 26/7 0.99(25.1)

16.3(413)

636.0 30/19 1.019(25.9)

17.2(436)

3.5(88)

3.5(88)3.5(88)3.5(88)

3.5(88)3.5(88)

3.5(88)

3.5(88)3.5(88)

3.5(88)

3.5(88)

3.5(88)3.5(88)

3.5(88)

1.4 (35) 1.4 (35)

1.4 (35)

1.4 (35)

1.4 (35)

1.4 (35) 1.4 (35)

1.4 (35)

1.4 (35)

1.4 (35)

1.4 (35)

1.4 (35)

1.4 (35) 1.4 (35)

2.4(61)2.4(61)2.4(61)2.4(61)2.4(61)2.4(61)2.4(61)

2.4(61)2.4(61)2.4(61)2.4(61)

2.4(61)2.4(61)

2.4(61)

3 (76)

1 (25)

3.5(88)

1.4 (35)

2.4(61)

DCAC-91353

DCAC-913511

DCAC-91350

DCAC-91348

DCAC-91247

DCAC-91346

DCAC-912451

DCAC-912441

DCAC-912431

DCAC-91242

DCAC-91141

DCAC-91239

DCAC-91138

DCAC-91137

DCAC-91136 24/7666.6 1(25.4)

16.3(413)

60

60

60

666.6 26/7 1.014(25.8)

16.3(413)

715.5 24/7 1.036(26.3)

16.3(413)

60

60

60

60

715.5 26/7 1.051(26.7)

17.2(436)

795.0 36/1 1.040(26.4)

16.3(413)

795.0 45/7 1.063(27.0)

17.2(436)

795.0 24/7 1.092(27.7)

17.2(436)

795.0 54/7 1.092(27.7)

17.2(436)

795.0 26/7 1.108(28.1)

17.2(436)

60

795.0 30/19 1.14(30)

19.6(496)

60

900.0 45/7 1.131(28.7)

17.2(436)

60

900.0 54/7 1.162(29.5)

19.6(496)

60

954.0 45/7 1.165(29.6)

19.6(496)

60

954.0 54/7 1.196(30.4)

19.6(496)

60

1033.5 45/7 1.212(30.8)

19.6(496)

60

60

MAXADJUST DIA L

KCMIL STRANDING AL/ST

MINIMUMPRESS SIZE (TONS)A

Dimensions lnches(mm)OUTSIDEDIAMETER IN(mm)

CatalogNumber

LENGTH BEFORECOMPRESSION IN(mm) B

1.75'' 44L

1.75

''(44

)

A

DIAMAMENTX ADJUST


B

3 (76)

3 (76)

3 (76)

3 (76)

3 (76)

3 (76)

3 (76)

3 (76) 3 (76)

3 (76)

3 (76)

3 (76) 3 (76)

3 (76)

1 (25)

1 (25) 1 (25) 1 (25) 1 (25) 1 (25)

1 (25)

1 (25) 1 (25) 1 (25)

1 (25) 1 (25)

1 (25)

1 (25)

DCAC Deadends


59

2.4(61)

DCAC-92075

DCAC-91974

DCAC-91973

DCAC-91972

DCAC-91871

DCAC-91769

DCAC-917681

DCAC-91667

DCAC-91663

DCAC-91562

DCAC-91561

DCAC-91560

DCAC-915591

DCAC-91558

DCAC-91457

DCAC-91456

DCAC-91455

DCAC-91454 1033.5 54/7 1.245(31.6)

20.6(522)

60

1113.0 45/7 1.259(32)

20.6(522)

60

1113.0 54/19 1.293(32.8)

20.6(522)

60

1192.5 45/7 1.302(33.1)

20.6(522)

60

1192.5 1.338(34)

21.5(545)

6054/19

1272.0 1.345(34.1)

21.5(545)

6045/7

21.5(545)

601272.0 54/19 1.382(35.1)

1351.5 45/7 1.386(35.2)

21.5(545)

60

1351.5 1.424(36.2)

21.5(545)

6054/19

1431.0 1.427(36.2)

23.5(596)

6045/7

1590.0 1.504(38.2)

23.5(596)

6045/7

1590.0 1.545(39.2)

24.4(621)

6054/19

1780.0 1.602(40.7)

24.4(621)

6084/19

2034.5 1.681(42.7)72/7 100

2156.0 1.762(44.8)

25.3(643)

10084/19

25.3(643)

2167.0 72/7 1.735(44.1)

25.3(643)

100

2312.0 76/19 1.802(45.8)

25.3(643)

100

2515.0 76/19 1.808(45.9)

28.7(729)

100 4 (101)

4 (101) 4 (101) 4 (101)

4 (101)

4 (101)

4 (101)

3 (76)

3 (76)

3 (76)

3 (76)

3 (76)

3 (76)

3 (76) 3 (76) 3 (76) 3 (76) 3 (76)

1.1 (28)

1.1 (28) 1.1 (28) 1.1 (28) 1.1 (28)

1.1 (28) 1.1 (28)

1.1 (28) 1.1 (28)

1 (25)

1 (25)

1 (25)

1 (25)

1 (25)

1 (25) 1 (25) 1 (25) 1 (25)

4.4(111)

4.4(111)4.4(111)4.4(111)4.4(111)

4.4(111)4.4(111)

4.4(111)

4.4(111)

2(50) 2(50)

2(50)

2(50)

1.6 (40)

1.6 (40) 1.6 (40)

1.6 (40)

1.6 (40)

3.5(88)3.5(88)

3.5(88)3.5(88)

3.5(88)3.5(88)3.5(88)3.5(88)3.5(88)

1.4 (35)

1.4 (35)

1.4 (35)

1.4 (35)

1.4 (35)

1.4 (35)

1.4 (35)

1.4 (35) 1.4 (35)

3.1(79)3.1(79)

3.1(79)

3.1(79)

2.4(61)2.4(61)2.4(61)2.4(61)2.4(61)

2.4(61)2.4(61)2.4(61)2.4(61)2.4(61)2.4(61)2.4(61)2.4(61)

1.75'' 44L

1.75

''(44

)

A

DIAMAMENTX ADJUST


B

MAXADJUST DIA L


MINIMUMPRESS SIZE (TONS)A

Dimensions lnches(mm)OUTSIDEDIAMETER IN£ m̈m)

CatalogNumber

LENGTH BEFORECOMPRESSION IN(mm) B

DCAC Deadends


60

B

C

A

1.75

''(44

)

1.75'' 44

15¡ ã

L


4(101.5)

4(101.5)

4(101.5)

2(50) 2(50) 2(50)

4(101.5)

2(50) 2(50)

2(50)

2(50)

2(50)

2(50)

2(50) 2(50)

2(50)

60

60

60

60

60

60

60

60

12

12

60

12

12

12

12

12

2(50)

L

0.62(15)

1 (25)

2(50)

16.3(413)

0.966(24.5)26/7605.0DCST-11128

0.62(15)

1 (25)

2(50)

16.3(413)

0.953(24.2)24/7605.0DCST-11127

0.62(15)

1 (25)

2(50)

16.3(413)

0.953(24.2)30/7556.5DCST-11126

0.52(13)

1 (25)

2(50)

14.9(378)

0.927(23.5)26/7556.5DCST-11025

0.52(13)

2(50)

1 (25)

14.9(378)

0.914(23.2)24/7556.5DCST-11024

0.52(13)

1 (25)

2(50)

14.9(378)

0.879(22.3)18/1556.5DCST-11023

0.62(15)

1 (25)

2(50)

16.3(413)

0.883(22.4)30/7477DCST-11122

0.52(13)

1 (25)

2(50)

14.9(378)

0.858(21.8)26/7477DCST-110211

0.52(13)

1 (25)

2(50)

14(356)

0.846(21.5)24/7477DCST-10920

0.52(13)

1 (25)

2(50)

14(356)

0.814(20.7)18/1477DCST-10919

0.52(13)

1 (25)

2(50)

14.9(378)

0.806(20.5)30/7397.5DCST-11018

0.52(13)

1 (25)

2(50)

14(356)

0.783(19.9)26/7397.5DCST-10917

DCST-10815

DCST-10914

397.5 18/1 0.743(18.9)

13.2(336)

2(50)

1 (25)

0.41(10)

0.41(10)

1 (25)

2(50)

13.2(336)

0.741(18.8)30/7336.4

26/7336.4

336.4 18/1

26/7266.8


0.72(18.3)

0.41(10)

1 (25)

2(50)

13.2(336)

DCST-10813

0.41(10)

1 (25)

2(50)

13.2(336)

0.684(17.4)

DCST-10812


120.642(16.3)

0.41(10)

2(50)

DCST-10710

CA

Dimensions lnches(mm)OUTSIDEDIAMETER IN£ m̈m)

CatalogNumber

1 (25)

LENGTH BEFORECOMPRESSION IN(mm)

12.2(310)

B

DCST Deadends


61 100 4

(101)1.1(27)

1.5 (38)

3.0(76)

28.7(729)

1.808(45.9)76/192515.0DCST-12075

100 4(101)

1.1(27)

1.5 (38)

3.0(76)

25.3(643)

1.802(45.8)76/192312.0DCST-11974

100 4(101)

1.1(27)

1.5 (38)

3.0(76)

25.3(643)

1.735(44.1)72/72167.0DCST-11973

25.3(643)

84/19 100 4(101)

1.1(27)

1.5 (38)

3.0(76)

25.3(643)

1.762(44.8)

2156.0DCST-11972

100 4(101)

0.94(23)

1.2 (30)

2.5(63)72/7 1.681

(42.7)2034.5DCST-11871

84/19 60 4(101)

0.94(23)

1.2 (30)

2.5(63)

24.4(621)

1.602(40.7)

1780.0DCST-11769

54/19 60 4(101)

0.94(23)

1.2 (30)

2.5(63)

24.4(621)

1.545(39.2)

1590.0DCST-117681

45/7 60 3 (76)

0.94(23)

1.2 (30)

2.5(63)

23.5(596)

1.504(38.2)

1590.0DCST-11667

45/7 60 3 (76)

0.94(23)

1.2 (30)

2.5(63)

23.5(596)

1.427(36.2)

1431.0DCST-11663

54/19 60 3 (76)

0.78(19)

1.2 (30)

2.5(63)

21.5(545)

1.424(36.2)

1351.5DCST-11562

60 3 (76)

0.78(19)

1.2 (30)

2.5(63)

21.5(545)

1.386(35.2)45/71351.5DCST-11561

1.382(35.1)54/191272.0DCST-11560 60 3

(76)0.78(19)

1.2 (30)

2.5(63)

21.5(545)

45/7 60 3 (76)

0.78(19)

1.2 (30)

2.5(63)

21.5(545)

1.345(34.1)

1272.0DCST-115591

54/19 60 3 (76)

0.78(19)

1.2 (30)

2.5(63)

21.5(545)

1.338(34)

1192.5DCST-11558

60 3 (76)

0.78(19)

1.2 (30)

2.5(63)

20.6(522)

1.302(33.1)45/71192.5DCST-11457

3 (76)

0.62(15)

1 (25)

2(50)

17.2(436)

1.019(25.9)30/19636.0DCST-11234

3 (76)

0.62(15)

1 (25)

2(50)

16.3(413)

0.99(25.1)26/7636.0DCST-11133

3 (76)

0.62(15)

1 (25)

2(50)

16.3(413)

0.977(24.8)24/7636.0DCST-11132

2(50)

2(50)

0.52(13)

1 (25)

2(50)

14.9(378)

0.93(23.9)

60

60

60

60

60

18/1636.0DCST-11031

2(50)

1 (25)

0.52(13)

14.9(378)

0.93(23.6)36/1636.0DCST-11030

B


CatalogNumber

OUTSIDEDIAMETER


A C


STRANDING AL/ST

KCMIL L

B

C

A

1.75

''(44

)

1.75'' 44

15¡ ã

L


IN(mm)

DCST Deadends


62

60 3 (76)

0.78(19)

1.2 (30)

2.5(63)

20.6(522)

1.293(32.8)54/191113.0DCST-11456

60 3 (76)

0.78(19)

1.2 (30)

2.5(63)

20.6(522)

1.259(32)45/71113.0DCST-11455

60 3 (76)

0.78(19)

1.2 (30)

2.5(63)

20.6(522)

1.245(31.6)54/71033.5DCST-11454

60 3 (76)

0.78(19)

1.2 (30)

2.5(63)

19.6(496)

1.212(30.8)45/71033.5DCST-11353

60 3 (76)

0.78(19)

1.2 (30)

2.5(63)

19.6(496)

1.196(30.4)54/7954.0DCST-113511

60 3 (76)

0.78(19)

1.2 (30)

2.5(63)

19.6(496)

1.165(29.6)45/7954.0DCST-11350

60 3 (76)

0.78(19)

1.2 (30)

2.5(63)

19.6(496)

1.162(29.5)54/7900.0DCST-11348

60 3 (76)

0.62(15)

1 (25)

2(50)

17.2(436)

1.131(28.7)45/7900.0DCST-11247

60 3 (76)

0.78(19)

1.2 (30)

2.5(63)

19.6(496)

1.14(30)30/19795.0DCST-11346

60 3 (76)

0.62(15)

1 (25)

2(50)

17.2(436)

1.108(28.1)26/7795.0DCST-112451

3 (76)

0.62(15)

1 (25)

2(50)

17.2(436)

1.092(27.7)54/7795.0DCST-112441

3 (76)

0.62(15)

1 (25)

2(50)

17.2(436)

1.092(27.7)24/7795.0DCST-112431

3 (76)

0.62(15)

1 (25)

2(50)

17.2(436)

1.063(27.0)45/7795.0DCST-11242

3 (76)

0.62(15)

1 (25)

2(50)

16.3(413)

1.040(26.4)36/1795.0DCST-11141

3 (76)

0.62(15)

1 (25)

2(50)

17.2(436)

1.051(26.7)26/7715.5DCST-11239

60

60

60

60

3 (76)

0.62(15)

1 (25)

2(50)

16.3(413)

1.036(26.3)24/7715.5DCST-11138

3 (76)

0.62(15)

1 (25)

2(50)

16.3(413)

1.014(25.8)26/7666.6DCST-11137

60

60

60

3 (76)

0.62(15)

16.3(413)

B


IN(mm) 1 (25)

CatalogNumber

OUTSIDEDIAMETER


A C

DCST-11136 2(50)

1(25.4)

60

MINIMUMPRESS SIZE

(TONS)STRANDING

AL/STKCMIL

666.6 24/7

L

B

C

A

1.75

''(44

)

1.75'' 44

15¡ ã

L


IN(mm)

DCST Deadends


63

K

H

L

W

5/8'' 5/8''

W

H

L

TYPE PG TYPE DE

CAQS Deadends

Material: Body and Keeper: Aluminum Alloy Hardware: Galvanized Steel Cotters and Pin: Stainless steel

2.7-4.2(1.22-1.90)

2.9-4.6(1.32-2.1)

WeightLbs(kg)

2.5-4.1(1.13-1.86)

2.0-3.6(0.9-1.6)

1.1-2.7(0.5-1.2)

1.2-2.2(0.54-1.0)

6-9/16(167)

11(279)

12-5/16 (313)

1-1/16 (27)

25/32 (19.8)

10,000 (44)

7 (178)

6-7/16(163.5)

4-3/4(121)

8,000 (33)

3-13/16 (97)

3-7/8 (98)

CAQS-46DE

KHL

Dimensions lnches(mm)CatalogNumber

11/16 (17.5)

4-1/16 (103)

0.18-0.52(4.57-13.21)

0.46-0.73(11.68-18.54)

W

5-1/2(140)

5-5/16(135)

7/8 (22.1)

CAQS-46PG 8,000 (33)

0.18-0.52(4.57-13.21)

11/16 (17.5)

1 (25.4)

11/16 (17.5)

1 (25.4)

15,000 (67)

CAQS-57PG

CAQS-70PG 1-1/8 (28.6)

15,000 (67)

CAQS-86PG

0.25-0.57(6.35-14.48)

1-1/4 (32)

CAQS-86PGL

CAQS-100PG 18,000 (80)

0.50-1.0(12.7-25.4)

9-7/8(250)

1-3/16 (30)

9-5/16(237)

1-1/4 (32)

4.5-6.2(2.04-2.81)

15,000 (67)

0.52-0.88(13.21-22.35)

1-1/16 (27)

7-7/16(189)

1 (25.4)

0.18-0.52(4.57-13.21)

Clamp Ranging INCHES (mm)

Ultimate BodyStrengthLbs(kN)

64

L

H

W

15/1

6 5/8 5/8

15/1

6H

W

L

C

TYPE CAQS TYPE CAQSS

5(127)

12-3/4(324)

W

0.365-0.574(9.27-14.58)

1.411-1.632(35.84-41.45)

1.150-1.412(29.21-35.86)

0.811-1.152(20.60-29.26)

10-1/2(267)

1 (25.4)

CatalogNumber


L H C

CAQS-15-1100 9-1/8(232)

3-7/8(98)

15,000 (67)

4-3/8(111)

8-1/16 (205)

3-5/32 (80)

0.574-0.831(14.58-20.65)0.811-1.152(35.83-41.45)1.150-1.412(29.21-35.86)

15,000 (67)15,000 (67)8,000 (36)10,000 (44)15,000 (67)15,000 (67)

CAQS-15-1150

CAQS-15-1200

CAQSS-8-2025

CAQS-15-2050

CAQS-15-2100

CAQS-15-2150

1 (25.4) 1

(25.4) 1

(25.4)

1 (25.4)

1 (25.4)

1 (25.4)

8-3/4(222)

3-1/4(83)

9-1/8(232)

3-7/8(98)

10-1/2(267)

4-3/8(111)

15,000 (67)

1.411-1.630(35.84-41.40)

CAQS-15-2200 10-1/2(267)

1 (25.4)

5(127)

21/32(16.7) 7/8(22.2)1-3/16(30.2)1-21/32(42.1)2-3/32(53.2)

3.5-5.2(1.59-2.36)

5.2-6.9(2.3-3.2)6.0-7.7(2.7-3.5)2.7-4.4(1.2-2.0)

WeightLbs(kg)

3.5-5.2(1.6-2.4)

7.5-9.2(3.4-4.2)8.5-10.2(3.9-4.6)

4.2-5.9(1.9-2.7)


Clamp RangingINCHES(mm)

CAQS Deadends


65

PD

W

L

H

K

R

1-1/2(38)

1-7/8 (48)

17(432)

W

0.642-0.879(16.3-22.32)

0.502-0.562(12.75-14.27)

0.398-0.447(10.03-11.35)

13-1/8 (333)

5/8(16)

PD

1-1/16 (27)

CatalogNumber


L H C K

CADGS-286 11-1/4 (286)

9-5/8(244)

1-1/4(32)

7-3/8(187)

12-3/8(315)

25,000 (111)

1-3/8(35)

11-1/2(292)

8-1/4(210)

3/4(19)

CADGS-2112 25,000(111)30,000(133)50,000(222)30,000(133)CADGS-2185

3.1-4.8(1.4-2.6)

WeightLbs(kg)

4.5-6.5(2.1-3.0)5.5-7.2(2.5-3.3)

R

5(127)6-1/2(165) 12(305)

1-3/8(35)

18(457)

1(25.4)



CADGS Deadends


66

L

W

H

C

PD

K

9-1/2(241)

11-1/2(292)

13-1/8 (333)

5/8(15.9)

6-1/2(165)

8-3/8(213)

15/16(24)

25,000 (111)

15,000 (67)

7-3/8(187)

1-3/8(35)

5-1/8(130)

1-1/4(32)

6-3/4(171)

9-1/16 (230)

CAQS-57

WeightLbs(kg)KCHL


3/4 (19)

PD

5/8(16)

10-1/4 (260)

3.1-4.8(1.4-2.6)

CAQS-70 20,000 (89)

CAQS-86

CAQS-112

CAQS-130

25,000(111)30,000(133)25,000(111)30,000(133)35,000(156)

50,000 (222)CAQS-185

CAQS-15525,000(111)30,000(133)35,000(156)

0.20-0.64(5.08-16.26) 0.30-0.75(7.62-19.05) 0.46-0.94(10.16-23.88) 0.50-1.2(12.88-30.48)

0.70-1.39(17.78-35.3)

1.18-1.55(29.97-38.61)

1.30-1.85(33.02-46.99)

W

1-1/4(32)

4.5-6.5(2.1-3.0)

1-3/8(34)

5.5-7.2(2.5-3.3)8.5-10.6(3.9-4.84)

13.4-15.7(6.1-7.2)

15.6-17.8(7.1-8.1)

21.3-22.5(9.67-10.2)

14(356)

1-7/16(36.5)

13-1/8(333)

1-1/2(38)

3/4(19.1)

11-1/4 (285)

1-1/16 (27)

9-5/8(244)

1-1/4(32)

5/8(15.9)

8-1/4(210)

3/4(19.1)

15-1/2(394)

2(51)

15-3/4(400)

12-3/8(215)

1-1/2(38)

3/4(19.1)

17(432)

2(51)

18(457)

12-3/8(215)

1-1/2(38)

1(25.4)



CAQS Deadends


67

15¡ ã

0.56(1

4)

LEN

GTH

BE

FOR

E C

OM

PRES

SIO

N

1.1(28)

1.75(44)

JTAT Jumper Terminals

Material: Body: Seamless Extruded Aluminum Alloy Tube Hardware: Aluminum Alloy Including: Bolts, Nuts & Washers

SHIELD WIRE DATA

0.57(0.26)607.8(200)

0.40(0.18)

0.27(0.12)7.4(188)

0.18(0.08)127.2(180)0.306-0.313

NET WEIGHTLENGTH IN (MM)

JTAT-10

MINIMUMPRESS(TONS)O.D(IN)

CatalogNumber

JTAT-12

JTAT-14

JTAT-16

JTAT-12

0.343-0.375

0.385-0.392

0.417-0.438

0.486-0.500

7.6(193)

7.6(193) 60

60

60

0.38(0.17)

LBS(KGS)

68

1.1(28)

0.56(14)

1.75

(44)

LEN

GTH

BE

FOR

E C

OM

PR

ES

SIO

N

JTST Jumper Terminals

Material: Body : Seamless Extruded Aluminum Alloy Tube Hardware: Aluminum Alloy Including: Bolts, Nuts and Washers

0.38(0.17)

60

60

607.6(193)

7.6(193)

0.486-0.500

0.417-0.438

0.385-0.392

0.343-0.375

JTST-12

JTST-16

JTST-14

JTST-12

CatalogNumber O.D(IN)

MINIMUMPRESS(TONS)

JTST-10

LENGTH IN (MM)

NET WEIGHT

0.306-0.313 7.2(180) 12 0.18(0.08)

7.4(188) 0.27(0.12)

0.40(0.18)

7.8(200) 60 0.57(0.26)

SHIELD WIRE DATA

LBS(KGS)

69

LEN

GTH

BE

FOR

E C

OM

PRES

SIO

N

1.75

(44)

1.75(44)

? 0.56(14)

1.75

(44)

? 0.56(14)

PAD WIDTH PAD WIDTH

CONDUCTOR RANGE

7.1(3.2)10018.4(467)4(102)4(102)2500

1.806-1.9001.662-1.710

6.1(2.8)10017.8(452)4(102)4(102)2000-2300

1.630-1.8051.504-1.608

4.7(2.1)6016.5(419)4(102)4(102)1750-1900

1.521-1.6151.385-1.455

3.9(1.7)6015.9(404)4(102)3.0(76)1590-1700

1.426-1.5201.290-1.382

3.1(1.4)6014.6(371)4(102)3.0(76)1351.5-1510.5

1.331-1.4251.212-1.300

2.7(1.2)6014(356)4(102)3.0(76)1192.5-1300

1.236-1.3301.125-1.196

2.2(0.99)6013.4(340)4(102)3.0(76)1000-1113

1.140-1.2351.046-1.018

1.8(0.81)6012.7(323)4(102)3.0(76)795-954

1.026-1.1310.960-1.010

1.5(0.68)6012.1(307)4(102)3.0(76)700-800

0.950-1.0450.880-0.930

1.1(0.49)6011.4(290)2.2(56)2(51)556.5-650

0.856-0.9500.789-0.858

0.8(0.36)1210.4(264)2.2(56)2(51)450-550

0.766-0.8550.702-0.766

JTSP-19

JTSP-20

JTSP-15

JTSP-16

JTSP-17

JTSP-11

JTSP-12

JTSP-13

JTSP-14

JTSP-09

JTSP-10

0.6(0.27)129.8(249)1.7(43)2(51)397.5-400

0.680-0.7650.630-0.695

0.4(0.18)129.2(234)1.7(43)2(51)300-350

0.595-0.6790.547-0.611

JTSP-08

NET WEIGHT LB(KG)

LENGTH IN (MM)

PAD WIDTH IN(MM)

HOLES

JTSP-07

MINIMUMPRESS(TONS)AAC SIZE KCMIL

O.D.(IN).StdCond/

Compact/TW

CatalogNumber

JTSP Jumper Terminals

Material: Body: Seamless extruded Aluminum Alloy tube Hardware: Aluminum Alloy Including: Bolts, Nuts and Washers

70

PAD WIDTH

PAD WIDTH

1.75(44)

? 0.56(14)1.75(44)

1.75(44)LEN

GTH

BE

FOR

E C

OM

PRES

SIO

N

?0.56(14)

15¡ ã

JTAP Jumper Terminals

Material: Body: Seamless Extruded Aluminum Alloy Tube Hardware: Aluminum Alloy or Stainless steel For EHV application, the surface are round corner, without sharp edge, ect…

CatalogNumber

O.D.(IN).StdCond/

Compact/TWAAC SIZE KCMIL

MINIMUMPRESS(TONS)

JTAP-07

PAD WIDTH IN(MM) HOLES

LENGTH IN (MM)

NET WEIGHT LBS(KGS)

JTAP-08

0.595-0.6790.547-0.611 300-350

1.7(43)2(51) 9.2(234) 12 0.4(0.18)

0.680-0.7650.630-0.695 397.5-400

1.7(43)2(51) 9.8(249) 12 0.6(0.27)

JTAP-10

JTAP-09

JTAP-14

JTAP-13

JTAP-12

JTAP-11

JTAP-17

JTAP-16

JTAP-15

JTAP-20

JTAP-19

0.766-0.8550.702-0.766 450-550

2.2(56)2(51) 10.4(264) 12 0.8(0.36)

0.856-0.9500.789-0.858 556.5-650

2.2(56)2(51) 11.4(290) 60 1.1(0.49)

0.950-1.0450.880-0.930 700-800

4(102)3.0(76) 12.1(307) 60 1.5(0.68)

1.026-1.1310.960-1.010 795-954

4(102)3.0(76) 12.7(323) 60 1.8(0.81)

1.140-1.2351.046-1.018 1000-1113

4(102)3.0(76) 13.4(340) 60 2.2(0.99)

1.236-1.3301.125-1.196 1192.5-1300

4(102)3.0(76) 14(356) 60 2.7(1.2)

1.331-1.4251.212-1.300 1351.5-1510.5

4(102)3.0(76) 14.6(371) 60 3.1(1.4)

1.426-1.5201.290-1.382 1590-1700

4(102)3.0(76) 15.9(404) 60 3.9(1.7)

1.521-1.6151.385-1.455 1750-1900

4(102)4(102) 16.5(419) 60 4.7(2.1)

1.630-1.8051.504-1.608 2000-2300

4(102)4(102) 17.8(452) 100 6.1(2.8)

1.806-1.9001.662-1.710 2500

4(102)4(102) 18.4(467) 100 7.1(3.2)

CONDUCTOR RANGE

71

J

A

LH

5/8'

'

W

CAC Suspension Clamp - Standard

Material: Body and Keeper: Aluminum Alloy Hardware: Galvanized Steel Cotters and Pin: Stainless Steel

9.0-11.3(4.08-5.13)

6.0-8.0(2.72-3.63)

4.9-6.9(2.22-3.1)

4.2-6.2(1.9-2.8)

3.8-5.6(1.72-2.54)

3.5-5.3(1.59-2.4)

3.2-5.0(1.45-2.27)

2.8-4.5(1.27-2.0)

2.5-4.2(1.13-1.9)

5/8(15.9)

1/2(12.7) 5/8(15.9)

1/2(12.7) 1/2(12.7) 1/2(12.7) 1/2(12.7)

1/2(12.7) 1/2(12.7)

4-1/4(108)

3-5/8(92)

3-17/32 (90)

3-11/64 (80.6)

3-5/64 (78)

3-1/8(79.4)

3 (76)

2-3/4 (70)

2-3/4 (70)

2-11/16 (68)

2-1/4 (57)

2-11/64 (55)

1-15/16 (49)

1-13/16 (46)

1-9/16 (39.7)

1-17/32 (39)

1-11/32 (34)

1-5/32(29.4)

12(305)

10-1/2 (267)

10-1/2(267)

10(254)

9-1/2(241)

9-3/16(233)

8-7/8(225)

8(203)

8-1/8(206)

25¡ ã

2.00-2.52(50.80-64.01)

1.40-2.13(35.56-54.10)

1.40-2.04(35.56-51.82)

1.25-1.82(31.75-46.23)

1.10-1.62(27.94-41.15)

1.00-1.47(25.40-37.34)

0.90-1.39(22.86-35.31

30,000 (133)

25,000 (111)

25,000 (111)25,000 (111)25,000 (111)

25,000 (111)25,000 (111)

25,000 (111)

CAC-30-252

CAC-25-213

CAC-25-204

CAC-25-182

CAC-25-162

CAC-25-147

CAC-25-139

CAC-25-118

CAC-25-104

CAC-18-85 2.1-3.8(0.95-1.7)

1/2(12.7)

2-9/16 (65)

15/16 (23.8)

7-1/2(191)

22¡ ã

17.5¡ ã

22.5¡ ã

22.5¡ ã

22.5¡ ã

20.5¡ ã

22.5¡ ã

30¡ ã

30¡ ã

30¡ ã

A

25,000 (111)

17,000 (76)

1/2(12.7)

2-9/32 (58)

6-3/4(171)CAC-17-62

WeightLbs(kg)JHL

Dimensions lnches(mm)Ultimate BodyStrengthLbs(kN)

CatalogNumber

29/32 (23)

1.9-3.5(0.86-1.6)

18,000 (80)

0.20-0.64(5.08-16.26) 0.40-0.85(10.16-21.59) 0.50-1.04(12.70-26.42) 0.70-1.18(17.78-29.97)

W

Clamping Ranging INCHES(mm)

72

15¡ ã-

35¡ ã J

HPD W

L

6.0(2.7)7.9(3.6)8.0(3.6)

5.6(2.6)7.4(3.4)7.6(3.5)

4.8(2.2)6.6(3.0)6.8(3.1)

3/4(19)

3/4(19)

3/4(19)

5/8(15.9)

1/2(12.7)

1/2(12.7)

3-3/4 (95)

3-1/2 (89)

3-1/2 (89)

2-1/4 (57)

2-11/64 (55)

2-1/32(51.6)

11-1/4 (286)

11-1/4 (286)

10-1/8 (257)

CAA-25C-213CAA-30S-213CAA-40-213 1.81-2.13

(45.97-54.1)

40,000(178)30,000(133)25,000(111)

CAA-40-204CAA-30S-204 1.73-2.04

(43.94-51.82)

40,000(178)30,000(133)25,000(111)CAA-25C-204

1.55-1.82(39.37-46.23)

40,000(178)30,000(133)25,000(111)

CAA-40-182CAA-30S-182CAA-25C-182

1/2(12.7)

3.6(1.6)5.0(2.3)5.3(2.4)

5/8(15.9)

3-1/4(82.5)

1-11/16 (43)

9-3/4(248)

1.25-1.47(31.75-37.34)

35,000(156)30,000(133)25,000(111)

CAA-35-147CAA-30S-147CAA-25C-147

CAA-25C-118CAA-30S-118

5/8(15.9)

PD

1-9/32(32.5)

9-7/8(251)

W

1.0-1.18(25.4-29.97)


3.6(1.6)5.0(2.3)5.3(2.4)

CatalogNumber



L H JWeightLbs(kg)

CAA-35-118 2-3/4 (70)

1/2(12.7)

35,000(156)30,000(133)25,000(111)

CAA Suspension Clamp - Standard Material: Body and Keeper: Aluminum Alloy Hardware: Galvanized Steel Cotters and Pin: Stainless steel

73

J PD

W

AL

H

CACFL Suspension Clamp - Standard

5/8(15.9)

5/8(15.9)

5/8(15.9)

5/8(15.9)

6.5(2.95)8.3(3.76)8.5(3.86)

5.5(2.49)7.2(3.27)7.0(3.31)

CACFL-25-182CACFL-25S-182CACFL-25C-182

25,000 (111)

17.5¡ ã

17.5¡ ã 1/2(12.7)

25,000 (111)


5.2(2.36)6.9(3.13)7.0(3.17)

17.5¡ ã25,000 (111)


4.7(2.13)6.4(2.90)6.5(2.94)

25,000 (111)


3-1/4 (83)

1-31/32 (50)

14(356)

1/2(12.7)

1/2(12.7)

1.55-1.82(39.37-46.23)

1/2(12.7)

17.5¡ ã

A

25,000 (111)

1/2(12.7)

2-1/2(63.5)


WeightLbs(kg)JHL

Dimensions lnches(mm)Ultimate BodyStrengthLbs(kN)

CatalogNumber

4.0(1.81)5.4(2.45)5.7(2.59)

1.0-1.18(25.4-29.97)

1.18-1.39(29.97-35.31)

1.25-1.47(31.75-37.34)

1.38-1.62(49.02-57.66)

W

MAX.TAKE-OFF ANGLE

17.5¡ ã

10(254)

10-1/2(267)

11(279)

12(305)

1-5/16(33.4)

1-17/32 (39)

1-5/8(41.3)

1-3/4(44.5)

2-7/8(73)

3-3/16 (81)

3-1/4 (83)

PD

5/8(15.9)



74

H

L A

W

PD

J

4.5(2.04)6.3(2.86)6.3(2.86)5.0(2.27)6.8(3.08)6.8(3.08)

CACF-25-204CACF-25S-204CACF-25C-204

6.2(2.81)8.0(3.63)8.0(3.63)

25,000 (111)CACF-25C-213

CACF-25-213CACF-25S-213

6.7(3.04)8.6(3.90)9.0(4.08)


3/4(19)

3/4(19)

5/8(15.9)

5/8(15.9)

5/8(15.9)

PD

CACF-36-280

CACF-25C-280CACF-30S-280

11.4(5.17)14.3(6.46)14.4(6.51)

5/8(15.9)

5/8(15.9)

5/8(15.9)

5-1/32(128)

4(102)

3-5/8(92)

3-1/2(89)

3 (76)

2-3/8(60.3)

2-5/16(58.7)

2-7/32(56.5)

2-1/16(52.4)

14(356)20¡ ã36,000(160)

25,000(111)30,000(133) 2.29-2.80

(58.17-71.12)

11(279)

11(279)

10-1/2(267)

10(254)

17.5¡ ã

17.5¡ ã

17.5¡ ã

MAX.TAKE-OFF ANGLE

25,000 (111)

W

1.93-2.27(49.02-57.66)

1.80-2.13(45.72-54.1)

1.73-2.04(43.94-51.82)

1.55-1.82(39.4-46.2)


CatalogNumber



L H JWeightLbs(kg)


3-1/4(82.5)

1/2(12.7)25,000

(111)

A

17.5¡ ã

1/2(12.7)

25,000 (111)

CACF Suspension Clamp - Standard


75

H

L

15¡ã

20¡ ã

19/3

2'' D

IA

J

1/2(12.7)

1/2(12.7)

1/2(12.7)

1.50-2.00 (38.1-50.8)

1/2(12.7)

28,00 (12)

1/2(12.7)

CAT-2-57

WeightLbs(kg)JL


0.42(0.19) 0.25-0.57 (6.3-14.4) 0.35-0.86 (8.8-21.8) 0.50-1.06 (12.7-26.9) 1.00-1.50 (25.4-38.1)

W

5-1/4(133)

3-7/8(98)

CAT-2-86

CAT-2-106

CAT-2-105

CAT-2-200

28,00 (12)

28,00 (12)

28,00 (12)

28,00 (12)

0.45(0.20)

0.62(0.28)

0.64(0.29)

0.75(0.34)

5-1/4(133)5-1/4(133)

5-1/4(133)

5-1/4(133)

3-7/8(98)

3-7/8(98)

3-7/8(98)

3-7/8(98)



CAT Suspension Clamp - Standard


76

L

SDE ACSS Dead End Clamp

Single Tongue Deadend Assembly Catalog

Number

ACSS Conductor #PAD Bolts

Dimension (IN.) (L Before Compression)

Code Word KCMIL

Strand AL/STL L A B C

SDE2668-1 Partidge 266.8 26/7 2 19.3 2.50 1.00 0.49

SDE2668-2 Junco 266.8 30/7 2 19.9 2.50 1.00 0.49

SDE300-1 Ostrich 300.0 26/7 2 19.9 2.50 1.00 0.49

SDE3364-1 Linnet 336.4 26/7 2 20.7 2.50 1.00 0.49

SDE3364-2 Oriole 336.4 30/7 2 20.7 2.50 1.00 0.49

SDE3975-1 Brant 397.5 24/7 2 23.2 2.50 1.00 0.49

SDE3975-2 Ibis 397.5 26/7 2 23.2 2.50 1.00 0.49

SDE3975-3 Lark 397.5 30/7 2 23.2 2.50 1.00 0.49

SDE447-1 Flicker 477.0 24/7 2 24.2 2.50 1.00 0.49

SDE447-2 Hawk 477.0 26/7 2 24.3 2.50 1.00 0.55

SDE447-3 Hen 477.0 30/7 2 24.7 2.62 1.24 0.67

SDE5565-1 Parakeet 556.5 24/7 2 25.0 2.50 1.00 0.55

Material: Body : Seamless extruded Aluminum Alloy Tube Eye: Galvanized steel forged Terminal: Seamless extruded Aluminum Alloy Tube Hardware: Stainless steel

77

SDE Table of ACSS Compression Deadend


Number



Code Word KCMIL

Strand AL/STL L A B C

SDE5565-2 Dove 556.5 26/7 4 26.1 2.62 1.24 0.67

SDE5565-3 Eagle 556.5 30/7 4 26.1 2.62 1.24 0.67

SDE605-1 Peacock 605.0 24/7 4 25.7 2.50 1.00 0.55

SDE605-2 Squab 605.0 26/7 4 26.1 2.62 1.24 0.67

SDE605-3 Wood Duck 605.0 30/7 4 26.1 2.62 1.24 0.67

SDE605-4 Teal 605.0 30/19 4 26.1 2.62 1.24 0.67

SDE636-1 Rook 636.0 24/7 4 26.1 2.50 1.00 0.55

SDE636-2 Grosbeak 636.0 26/7 4 26.1 2.62 1.24 0.67

SDE636-3 Scoter 636.0 30/7 4 25.7 2.62 1.24 0.67

SDE636-4 Egret 636.0 30/19 4 25.7 2.62 1.24 0.67

SDE666-1 Flamingo 666.0 24/7 4 26.1 2.50 1.24 0.55

SDE666-2 Gannet 666.0 26/7 4 27.4 2.62 1.00 0.67

SDE7155-1 Stilt 715.5 24/7 4 27.4 2.62 1.24 0.67

SDE7155-2 Starling 715.5 26/7 4 27.4 2.62 1.24 0.67

SDE7155-3 Redwing 715.5 30/19 4 27.4 2.62 1.24 0.67

SDE795-1 Tem 795.0 45/7 4 27.4 2.62 1.24 0.67

SDE795-2 Cuckoo 795.0 24/7 4 27.4 2.62 1.24 0.67

SDE795-3 Condor 795.0 54/7 4 27.4 2.62 1.24 0.67

SDE795-4 Drake 795.0 26/7 4 28.0 2.62 1.24 0.67

SDE795-5 Mallard 795.0 30/19 4 28.0 2.62 1.24 0.67

SDE900-1 Ruddy 900.0 45/7 4 28.0 2.62 1.24 0.67

SDE900-2 Canary 900.0 54/7 4 28.0 2.62 1.24 0.67

SDE954-1 Rail 954.0 45/7 4 28.0 2.62 1.24 0.67

78

SDE Table of ACSS Compression Deadend


Number



Code Word KCMIL Strand AL/STL L A B C

SDE954-2 Towhee 954.0 48/7 4 28.0 2.62 1.24 0.67

SDE954-3 Cardinal 954.0 54/7 4 28.0 2.62 1.24 0.67

SDE954-4 Canvasback 954.0 30/19 4 31.4 2.62 1.24 0.94

SDE10335-1 Ortolan 1033.5 45/7 4 29.9 2.62 1.24 0.78

SDE10335-2 Curlew 1033.5 54/7 4 30.1 2.62 1.24 0.78

SDE1113-1 Bluejay 1113.0 45/7 4 30.1 2.62 1.24 0.78

SDE1113-2 Finch 1113.0 54/19 4 31.0 2.62 1.24 0.78

SDE11925-1 Bunting 1192.5 45/7 4 31.0 2.62 1.24 0.78

SDE11925-2 Grackle 1192.5 54/19 4 31.0 2.62 1.24 0.78

SDE1272-1 Bittern 1272.0 45/7 4 31.8 2.62 1.24 0.78

SDE1272-2 Pheasant 1272.0 54/19 4 32.1 2.62 1.24 0.94

SDE13515-1 Dipper 1351.5 45/7 4 31.8 2.62 1.24 0.78

SDE13515-2 Martin 1351.5 54/19 4 33.9 2.62 1.24 0.94

SDE1431-1 Bobolink 1431.0 45/7 4 33.9 2.62 1.24 0.94

SDE1431-2 Plover 1431.0 54/19 4 33.9 2.62 1.24 0.94

SDE15105-1 Nuthatch 1510.5 45/7 4 33.9 2.62 1.24 0.94

SDE15105-2 Parrot 1510.5 54/19 4 34.9 2.62 1.24 0.94

SDE1590-1 Lapwing 1590.0 45/7 4 34.9 2.62 1.24 0.94

SDE1590-2 Falcon 1590.0 54/19 4 34.9 2.62 1.24 0.94

SDE1780-1 Chukar 1780.0 84/19 4 35.8 2.62 1.24 0.94

SDE2057-1 Roadrunner 2057.0 76/19 4 35.8 2.62 1.24 0.94

SDE2156-1 Bluebird 2156.0 84/19 4 39.0 3.00 1.50 1.08

SDE2312-1 Thrasher 2312.0 76/19 4 39.0 3.00 1.50 1.08

79

B

A

C

PD

J

Material: Body and Keeper: Aluminum Alloy Hardware: Galvanized Steel Cotters and Pin: Stainless Steel

HTSC ACSS Suspension Clamp

See table on next page for details on ACSS Suspension Clamps

80

HTSC Table of ACSS Suspension Clamp

Catalog Number

Fitting Clamping Range Inches (mm)

Ultimate Strength LBS(kN)

Max. Take Off

Angle (deg.)

Dimensions Inches (mm) Approx

WT. Each LBS.(KG) Type A B C PD J

HTSC-1 None

1.00-1.20 (25.40-30.48)

25000 (111)

17.5 9.15 (232.

4)

2.52 (64.0)

1.42 (36.0)

0.62 (15.8

8)

0.50 (12.7)

5.0(2.7)

HTSC-2 Socket 25000 (111) 7.1(3.22)

HTSC-3 Clevis 25000 (111) 7.1(3.22)

HTSC-4 None

1.18-1.39 (29.97-35.31)

25000 (111)

17.5 9.45 (240.03)

3.00 (76.2)

1.63 (41.4)

0.62 (15.8

8)

0.50 (12.7)

5.6(2.54)

HTSC-5 Socket 25000 (111) 7.6(3.44)

HTSC-6 Clevis 25000 (111) 7.6(3.44)

HTSC-7 None

1.55-1.82 (39.37-46.23)

30000 (133)

17.5

10.19

(258.83)

3.34 (84.8

4)

2.03 (51.5

6)

0.62 15.88)

0.50 (12.7)

6.96(3.13)

HTSC-8 Socket 30000 (133) 9.0(4.08)

HTSC-9 Clevis 25000 (111) 9.0(4.08)

HTSC-10 None

1.80-2.13 (45.72-54.1)

30000 (133)

17.5

11.75

(298.45)

3.62 (91.9

5)

2.39 (60.7

0)

0.62 (15.8

8)

0.50 (12.7)

8.9(4.04)

HTSC-11 Socket 30000 (133) 10.7(4.86)

HTSC-12 Clevis 25000 (111) 10.7(4.86)

HTSC-13 None

2.14-2.52 (54.36-64.01)

30000 (133)

17.5

12.75

(323.85)

4.02 (102.

1)

2.79 (70.8

7)

0.62 (15.8

8)

0.50 (12.7)

11.0(5.0)

HTSC-14 Socket 30000 (133) 12.9(5.86)

HTSC-15 Clevis 25000 (111) 13.3(6.04)

81

ALUMINUM BOOYFILLER PLUGSTEEL SLEEVE

L

MSJ ACSS Splice Sleeve

Catalog Number ACSS Conductor Dimension (IN.) (L Before

Compression)

Code Word KCMIL Strand AL/STL Full Tension Loop Splice

MSJ-2268-1 Partidge 266.8 26/7 24.5 16.1

MSJ-300-1 Ostrich 300.0 26/7 23.2 14.8

MSJ-3364-1 Linnet 336.4 26/7 24.5 16.1

MSJ-3364-2 Oriole 336.4 30/7 25.0 16.1

MSJ-3975-1 Brant 397.5 24/7 27.0 18.1

MSJ-3975-2 Ibis 397.5 26/7 27.0 18.1

MSJ-3975-3 Lark 397.5 30/7 27.0 18.1

MSJ-477-1 Flicker 477.0 24/7 30.2 20.1

MSJ-477-2 Hawk 477.0 26/7 30.2 20.1

MSJ-477-3 Hen 477.0 30/7 30.2 20.1

MSJ-5565-1 Parakeet 556.5 24/7 31.2 21.4

MSJ-5565-2 Dove 556.5 26/7 33.8 22.7

MSJ-5565-3 Eagle 556.5 30/7 33.8 22.7

Material: Seamless Aluminum Alloy Tube

82

MSJ Table of ACSS Splice Sleeve


Compression)


MSJ-605-1 Peacock 605.0 24/7 33.8 22.7

MSJ-605-2 Squab 605.0 26/7 33.8 22.7

MSJ-605-3 Wood Duck 605.0 30/7 33.8 22.7

MSJ-605-4 Teal 605.0 30/19 33.8 22.7

MSJ-636-1 Rook 636.0 24/7 33.8 22.7

MSJ-636-2 Grosbeak 636.0 26/7 33.8 22.7

MSJ-636-3 Scoter 636.0 30/7 33.8 22.7

MSJ-636-4 Egret 636.0 30/19 33.8 22.7

MSJ-666-1 Flamingo 666.0 24/7 33.8 22.7

MSJ-666-2 Gannet 666.0 26/7 33.8 22.7

MSJ-7155-1 Stilt 715.5 24/7 36.5 25.4

MSJ-7155-2 Starling 715.5 26/7 36.5 25.4

MSJ-7155-3 Redwing 715.5 30/19 36.5 25.4

MSJ-795-1 Tern 795.0 45/7 38.3 25.4

MSJ-795-2 Cuckoo 795.0 24/7 36.5 25.4

MSJ-795-3 Condor 795.0 54/7 36.5 25.4

MSJ-795-4 Drake 795.0 26/7 38.3 26.6

MSJ-795-5 Mallard 795.0 30/19 38.3 26.6

MSJ-900-1 Ruddy 900.0 45/7 38.3 26.6

MSJ-900-2 Canary 900.0 54/7 38.3 26.6

MSJ-954-1 Rail 954.0 45/7 38.3 26.6

MSJ-954-2 Towhee 954.0 48/7 38.3 26.6

MSJ-954-3 Cardinal 954.0 54/7 38.3 26.6

MSJ-954-4 Canvasback 954.0 30/19 40.2 28.6

MSJ-10335-1 Ortolan 1033.5 45/7 40.2 28.6

MSJ-10335-2 Curlew 1033.5 54/7 40.2 28.6

83

MSJ Table of ACSS Splice Sleeve


Compression)


MSJ-1113-1 Bluejay 1113.0 45/7 40.2 28.6

MSJ-1113-2 Finch 1113.0 54/19 41.9 30.2

MSJ-11925-1 Bunting 1192.5 45/7 41.9 30.2

MSJ-11925-2 Grackle 1192.5 54/19 43.5 31.9

MSJ-1272-1 Bittern 1272.0 45/7 43.5 31.9

MSJ-1272-2 Pheasant 1272.0 54/19 43.5 31.9

MSJ-13515-1 Dipper 1351.5 45/7 43.5 31.9

MSJ-13515-2 Martin 1351.5 54/19 45.2 33.6

MSJ-1431-1 Bobolink 1431.0 45/7 45.2 33.6

MSJ-1431-2 Plover 1431.0 54/19 45.2 33.6

MSJ-15105-1 Nuthatch 1510.5 45/7 45.2 33.6

MSJ-15105-2 Parrot 1510.5 54/19 47.0 35.4

MSJ-1590-1 Lapwing 1590.0 45/7 47.0 35.4

MSJ-1590-2 Falcon 1590.0 54/19 47.0 35.4

MSJ-1780-1 Chukar 1780.0 84/19 48.8 37.1

MSJ-2057-1 Roadrunner 2057.0 76/19 48.8 37.1

MSJ-2156-1 Bluebird 2156.0 84/19 50.7 39.1

MSJ-2312-1 Thrasher 2312.0 76/19 52.0 40.4

84

CL Armor Grip Suspension Clamp (Conductor)

A C

E

B

H

I

Material: Clamp Body & Clevis: Aluminum Alloy A356-t6

Rubber: EPDM

Bolt & Nut: Galvanized Carbon Steel

Type Conductor Range(IN)

Main Dimension Vertical Breaking Strength (Single/Double)

A B C E H I

CL-95 0.531～0.555 1.732 3.465 0.709 0.787 2.047 5/8

20,000LBS(89kN)/ 40,000LBS(178kN)

CLS-95

CL-120-1 0.556～0.594 1.732 3.465 0.709 0.787 2.047 5/8

CLS-120-1

CL-120-2 0.620～0.645 1.732 3.465 0.709 0.787 2.047 5/8

CLS-120-2

CL-150-1 0.645～0.673 1.732 3.74 0.945 0.787 2.205 5/8 15,000LBS(66kN)/

30,000LBS(132kN) CLS-150-1

CL-150-2 0.674～0.690 1.732 3.74 0.945 0.787 2.205 5/8 15,000LBS(66kN)/

30,000LBS(132kN CLS-150-2

85

CL Table of Armor Grip Suspension Clamp (Conductor)

CL-185-1 0.732～0.748 1.732 3.74 0.945 0.787 2.205 5/8 15,000LBS(66kN)/

30,000LBS(132kN CLS-185-1

CL-185-2 0.769～0.791 1.732 3.74 0.945 0.787 2.205 5/8 20,000LBS(89kN)/

40,000LBS(178kN) CLS-185-2

CL-210 0.792～0.824 1.969 4.724 0.945 1.063 2.756 5/8

20,000LBS(89kN)/ 40,000LBS(178kN)

CLS-1210

CL-240-1 0.846～0.870 1.969 4.724 0.945 1.063 2.756 5/8

CLS-240-1

CL-240-2 0.870～0.893 1.969 4.724 0.945 1.063 2.756 5/8

CLS-240-2

CL-300-1 0.894～0.907 1.969 4.724 0.866 1.083 2.953 5/8

CLS-300-1

CL-300-2 0.921～0.937 1.969 4.724 0.866 1.083 2.953 5/8

CLS-300-2

CL-300-3 0.937～0.963 1.969 4.724 0.866 1.083 2.953 5/8

CLS-300-3

CL-300-4 0.987～1.006 1.969 4.724 0.866 1.083 2.953 5/8

CLS-300-4

CL-400-1 1.041～1.074 1.969 5.512 1.181 0.984 2.953 5/8

25,000LBS(111kN)/ 50,000LBS (222kN)

CLS-400-1

CL-400-2 1.075～1.152 1.969 5.512 1.181 0.984 2.953 5/8

CLS-400-2

CL-500 1.176～1.226 1.969 5.512 1.181 1.063 2.953 5/8

CLS-500

CL-630 1.315～1.394 1.969 5.512 1.181 1.063 2.953 5/8

CLS-630

(1) Type letters with “S” are double suspension clamp while without letter “S” are single suspension clamp.

86

CL/G Armor Grip Suspension Clamp (GSW)

B

E

I

H

C

Type Conductor Range(IN)

Main Dimension Vertical Breaking Strength (Single/Double)

A B C E H I

CL-1/G 0.272～0.283 1.732 2.362 0.709 1.299 2.165 5/8

15,000LBS(68kN)/ 30,000LBS(136kN)

CLS-1/G

CL-4/G 0.304～0.315 1.732 2.362 0.709 1.299 2.165 5/8

CLS-4/G

CL-6/G 0.328～0.342 1.732 2.362 0.709 1.299 2.165 5/8

CLS-6/G

CL-7/G 0.342～0.356 1.732 2.362 0.709 1.299 2.165 5/8

CLS-7/G

CL-9/G 0.375～0.389 1.732 2.362 0.709 1.299 2.165 5/8

CLS-9/G

CL-10/G

0.390～0.404 1.732 2.362 0.709 1.299 2.165 5/8

CLS-10/G

Material: Clamp Body & Clevis: Galvanized Steel Armor Rod: Galvanized steel wire or Aluminum clad steel wire Rubber: EPDM Bolt & Nut: Galvanized Carbon Steel

87

CL/G Table of Armor Grip Suspension Clamp (GSW)

Type Conductor Range (IN)

Main Dimension

Vertical Breaking Strength (Single/Double)

A B C E H I

CL-1/G 0.272～0.283 1.732 2.362 0.709 1.299 2.165 5/8

15,000LBS (68kN)/

30,000LBS (136kN)

CLS-1/G

CL-4/G 0.304～0.315 1.732 2.362 0.709 1.299 2.165 5/8

CLS-4/G

CL-6/G 0.328～0.342 1.732 2.362 0.709 1.299 2.165 5/8

CLS-6/G

CL-7/G 0.342～0.356 1.732 2.362 0.709 1.299 2.165 5/8

CLS-7/G

CL-9/G 0.375～0.389 1.732 2.362 0.709 1.299 2.165 5/8

CLS-9/G

CL-10/G 0.390～0.404 1.732 2.362 0.709 1.299 2.165 5/8

CLS-10/G

CL-11/G 0.405～0.418 1.732 2.362 0.709 1.299 2.165 5/8

CLS-11/G

CL-12/G 0.419～0.434 1.732 2.362 0.709 1.299 2.165 5/8

CLS-12/G

CL-13/G 0.435～0.450 1.732 2.362 0.709 1.299 2.165 5/8

CLS-13/G

CL-15/G 0.470～0.481 1.732 2.362 0.709 1.299 2.165 5/8

CLS-15/G

CL-16/G 0.481～0.500 1.732 2.362 0.709 1.299 2.165 5/8

CLS-16/G

(1) Type letters with “S” are double suspension clamp while without letter “S” are single suspension clamp.

88

D

L

P

D1

FJH Preformed Armor Rod (Conductor)

Catalog number

ACSR Conductor Dimension (IN.) Nos per set

Code Word KCMIL Strand AL/STL L D D1 P FYH-2668-1 Partidge 266.8 26/7 59.1 0.142 0.533 5.9 16

FYH-2668-2 Junco 266.8 30/7 59.1 0.142 0.548 6.1 16

FYH-300-1 Ostrich 300.0 26/7 59.1 0.142 0.564 6.3 16

FYH-3364-1 Linnet 336.4 26/7 70.9 0.181 0.598 6.7 14

FYH-3364-2 Oriole 336.4 30/7 70.9 0.181 0.615 7.3 14

FYH-3975-1 Brant 397.5 24/7 70.9 0.181 0.641 7.3 14

FYH-3975-2 Ibis 397.5 26/7 70.9 0.181 0.650 7.5 14

FYH-3975-3 Lark 397.5 30/7 70.9 0.181 0.669 7.7 14

FYH-477-1 Flicker 477.0 24/7 74.8 0.181 0.702 7.9 16

FYH-477-2 Hawk 477.0 26/7 74.8 0.181 0.712 8.3 16

FYH-477-3 Hen 477.0 30/7 74.8 0.181 0.733 8.5 16

FYH-5565-1 Parakeet 556.5 24/7 78.7 0.248 0.759 8.9 13

FYH-5565-2 Dove 556.5 26/7 78.7 0.248 0.769 9.1 13

FYH-5565-3 Eagle 556.5 30/7 78.7 0.248 0.790 9.6 13

89

FYH Table of Preformed Armor Rod

Catalog number


Code Word KCMIL Strand AL/STL L D D1 P

FYH-605-1 Peacock 605.0 24/7 78.7 0.248 0.790 9.6 13

FYH-605-2 Squab 605.0 26/7 78.7 0.248 0.790 9.6 13

FYH-605-3 Wood Duck 605.0 30/7 78.7 0.248 0.825 9.8 13

FYH-605-4 Teal 605.0 30/19 78.7 0.248 0.825 9.8 13

FYH-636-1 Rook 636.0 24/7 78.7 0.248 0.811 9.4 13

FYH-636-2 Grosbeak 636.0 26/7 78.7 0.248 0.821 9.8 13

FYH-636-3 Scoter 636.0 30/7 78.7 0.248 0.846 9.8 13

FYH-636-4 Egret 636.0 30/19 78.7 0.248 0.846 9.8 13

FYH-666-1 Flamingo 666.0 24/7 78.7 0.248 0.830 9.8 13

FYH-666-2 Gannet 666.0 26/7 78.7 0.248 0.842 9.8 13

FYH-7155-1 Stilt 715.5 24/7 86.6 0.248 0.860 9.8 14

FYH-7155-2 Starling 715.5 26/7 86.6 0.248 0.872 9.8 14

FYH-7155-3 Redwing 715.5 30/19 86.6 0.248 0.897 10.2 14

FYH-795-1 Tern 795.0 45/7 86.6 0.248 0.882 9.8 14

FYH-795-2 Cuckoo 795.0 24/7 86.6 0.248 0.906 10.2 14

FYH-795-3 Condor 795.0 54/7 86.6 0.248 0.906 10.2 14

FYH-795-4 Drake 795.0 26/7 86.6 0.248 0.920 10.2 14

FYH-795-5 Mallard 795.0 30/19 86.6 0.248 0.946 10.4 14

FYH-900-1 Ruddy 900.0 45/7 86.6 0.248 0.939 10.6 14

FYH-900-2 Canary 900.0 54/7 86.6 0.248 0.964 10.8 16

FYH-954-1 Rail 954.0 45/7 86.6 0.248 0.967 10.8 16

FYH-954-2 Towhee 954.0 48/7 86.6 0.248 0.975 10.8 16

FYH-954-3 Cardinal 954.0 54/7 98.4 0.248 0.993 11.0 16

FYH-954-4 Canvasback 954.0 30/19 98.4 0.248 1.036 11.2 16

FYH-10335-1 Ortolan 1033.5 45/7 98.4 0.248 1.006 11.0 16

FYH-10335-2 Curlew 1033.5 54/7 98.4 0.248 1.033 11.2 16

90

FYH Table of Preformed Armor Rod

Catalog number


Code Word KCMIL Strand AL/STL L D D1 P FYH-1113-1 Bluejay 1113.0 45/7 98.4 0.307 1.044 11.2 15

FYH-1113-2 Finch 1113.0 54/19 98.4 0.307 1.073 11.4 15

FYH-11925-1 Bunting 1192.5 45/7 98.4 0.307 1.081 11.4 15

FYH-11925-2 Grackle 1192.5 54/19 98.4 0.307 1.111 11.4 15

FYH-1272-1 Bittern 1272.0 45/7 98.4 0.307 1.116 11.8 15

FYH-1272-2 Pheasant 1272.0 54/19 98.4 0.307 1.147 12.8 15

FYH-13515-1 Dipper 1351.5 45/7 98.4 0.307 1.150 12.8 15

FYH-13515-2 Martin 1351.5 54/19 98.4 0.307 1.182 13.0 15

FYH-1431-1 Bobolink 1431.0 45/7 98.4 0.307 1.184 13.0 15

FYH-1431-2 Plover 1431.0 54/19 98.4 0.307 1.216 13.0 16

FYH-15105-1 Nuthatch 1510.5 45/7 98.4 0.307 1.217 13.0 16

FYH-15105-2 Parrot 1510.5 54/19 98.4 0.307 1.250 13.0 17

FYH-1590-1 Lapwing 1590.0 45/7 98.4 0.307 1.248 13.0 17

FYH-1590-2 Falcon 1590.0 54/19 98.4 0.307 1.281 14.2 17

FYH-1780-1 Chukar 1780.0 84/19 137.8 0.307 1.330 14.6 17

FYH-2057-1 Roadrunner 2057.0 76/19 137.8 0.362 1.411 14.6 17

FYH-2156-1 Bluebird 2156.0 84/19 137.8 0.362 1.462 14.6 17

FYH-2312-1 Thrasher 2312.0 76/19 137.8 0.362 1.496 14.6 17

91

Contact us…

JS Hardware 51 Shuang-xian-nan Road Jiangdu City, Jingsu Province, China Tel: 86-514-86821637 Fax: 86-514-86821467 Email: [email protected] In USA and Canada 4030 Moorpark Ave., Suite 222 San Jose, CA 95117 Tel: 408-850-1416 Fax: 408-519-7091 Email: [email protected] Website: www.js-hardware.com







http://www.js-hardware.com/�



2013 Product Catalog - JS Hardware - a com

Documents

Transcript of 2013 Product Catalog - JS Hardware - a com