Post on 01-Jun-2019
XVI CONGRESO PANAMERICANO DE MECÁNICA DE SUELOS E INGENIERÍA GEOTÉCNICAXVI PANAMERICAN CONFERENCE ON SOIL MECHANICS AND GEOTECHNICAL ENGINEERING
Boletín 03Octubre 2018
www.panamerican2019mexico.com info@panamerican2019mexico.com
Newsletter 03October 2018
Panamericano 2019Cancún Mx.
Noviembre · November17 - 20
2019
www.iberostar.com
Sede / Venue Hotel IBEROSTAR, Cancún Mx
·
La organización del primer Congreso Panamericano de Mecánica de Suelos e Ingeniería Geotécnica se llevó a cabo en México en el año de 1959. En noviembre de 2019 regresa a nuestro país; teniendo como sede el Caribe mexicano. Cancún es un destino turístico reconocido a nivel mundial que ofrece belleza natural, una infraestruc-tura turística de primer nivel e importantes y atractivos centros arqueológicos.
En esta ocasión, se desarrollará paralelamente el 5º Simposio Internacional de Cimentaciones Profundas con la participación conjunta del Geo Institute (ASCE) y del Deep Foundations Institute (DFI). Cabe mencionar que, dentro de las actividades, se contemplan más de 10 sesiones técnicas con la participación de especialistas de toda América y del resto del mundo, así como cursos pre-congreso de gran interés a la práctica profesional y la Conferencia Arthur Casagrande.
Por parte de los organizadores, extendemos una cordial invitación a la comunidad geotécnica internacional para plantear en conjunto las problemáticas, retos y soluciones que enfrenta este sector de la ingeniería.
The first Pan-American Conference of Soil Mechanics and Geotechnical Engineering was held in Mexico in 1959. In November 2019 it will return to our country; with the Mexican Caribbean as its headquarters. Cancun is recog-nized worldwide for its natural beauty, first class tourist infrastructure and important and attractive archaeological sites.
On this occasion, the 5th International Deep Foundations Symposium will be held in parallel with the joint collabo-ration of the Geo Institute (ASCE) and the Deep Founda-tions Institute (DFI). It is worth mentioning that, within the activities, more than 10 technical sessions are planned with the participation of specialists from all over America and the rest of the world, as well as pre-conference courses of great interest to professional practice and the Arthur Casagrande Conference.
On the part of the Organizers, we extend a friendly invita-tion to the international engineering community, in order to establish the problems, challenges and solutions facing this engineering sector.
XVI CONGRESO PANAMERICANO DE MECÁNICA DE SUELOS E INGENIERÍA GEOTÉCNICA
XVI PANAMERICAN CONFERENCE ON SOIL MECHANICS AND GEOTECHNICAL ENGINEERING
·
Sociedad Mexicana de Ingeniería GeotécnicaMexican Society of Geotechnical Engineering
Walter I. PANIAGUA ZAVALA
Presidente del Comité OrganizadorChairman organizing committee
Panamericano 2019Cancún Mx. International Society for Soil Mechanics
and Geotechnical Engineering
Comités · Committees Temas técnicos · Technical topics
COMITÉ ORGANIZADORORGANIZING COMMITTEE Presidente · ChairWalter I. Paniagua Zavala
Secretario · SecretaryJuan Paulín Aguirre
Tesorero · TreasurerJuan de Dios Alemán Velázquez
COMITÉ DE RELACIONES PÚBLICAS Y PATROCINIOSPUBLIC RELATIONS AND SPONSORSHIP COMMITTEE
Gabriel MartínezRaúl López Roldán
COMITÉ LOCAL (CANCÚN)LOCAL COMMITTEE
Rodolfo RamírezZenón Medina Pacheco
COMITÉ ASESOR LOCAL LOCAL ADVISORY COMMITEE
Gabriel Auvinet GuichardGabriel Moreno PeceroGuillermo Springall Caram
COMITÉ TÉCNICOTECHNICAL COMMITTEE
Presidente · ChairAlexandra Ossa López
Comité · CommitteeCarlos Roberto Torres ÁlvarezEnrique Ibarra RazoJosé Luis Rangel NúñezJuan Félix RodríguezMarcela González BlandónMiguel Ángel Figueras CorteMoisés Juárez CamarenaRicardo Ortiz HermosilloRigoberto Rivera Constantino
COMITÉ EDITORIALEDITORIAL COMMITEE
Presidente · ChairNorma Patricia López Acosta
Comité · CommitteeAlejandra Liliana Espinosa SantiagoEduardo Martínez Hernández
Tema1. Laboratorio y pruebas de campoTopic1. Laboratory and in situ testing
Heraldo Luiz Giacheti (Brasil)Iván Rivera (Canadá)Osvaldo Flores (México)
Tema2. Modelado analítico y físico en geotecniaTopic 2. Analytical and physical modelling in geotechnics
Alejandro Martínez Vela (EUA)Celestino Valle Molina (México)Marcio de Souza Soares de Almeida (Brasil)Marcos Orozco Calderón (México)
Tema 3. Modelado numérico en geotecniaTopic 3. Numerical modelling in geotechnics
Alejo Sfriso (Argentina)José Luis Rangel Núñez (México)Richard Wan (Canadá)
Tema 4. Suelos no saturadosTopic 4. Unsaturated soils
Alfredo Zepeda Garrido (México)Eduardo Rojas González (México)John McCartney (EUA)Laureano R. Hoyos (EUA/Colombia)
Tema 5. Suelos blandosTopic 5. Soft soils
Jorge Alberto Rodríguez (Colombia)Manuel J. Mendoza López (México)
Tema 6. Cimentaciones y estructuras de retenciónTopic 6. Foundations and retaining structures
Alessandro Mandolini (Italia)Jarbas Militizky (Brasil)Mary Ellen Large (EUA)Walter Paniagua (México)
Tema 7. Excavaciones y túnelesTopic 7. Excavations and tunnels
Andrés Marulanda Escobar (Colombia)Juan Jacobo Schmitter Martín del Campo (México)Luiz Guilherme de Mello (Brasil)
Tema 8. Estructuras fuera de costaTopic 8. Offshore Geotechnics
Diego Cruz Roque (México)José Parra (Venezuela)Rachel Guerreiro Basilio Costa Genzani (Brasil)Víctor M. Taboada Urtuzuástegui (EUA)
Tema 9. Ingeniería del transporte en geotecniaTopic 9. Transportation in geotechnics
Alexandra Ossa López (México)Gloria Beltrán Calvo (Colombia)Luis Guillermo Loria Salazar (Costa Rica)Paul Garnica Anguas (México)
Tema 10. Peligros naturalesTopic 10. Natural hazards
Hernán Eduardo Martínez Carvajal (Colombia)Juan Félix Rodríguez (Brasil)Renato Pinto da Cunha (Brasil)Roberto Terzariol (Argentina)
Tema 11. Presas de tierra y enrocamiento y de relaves (residuos mineros)Topic 11. Embankments and tailings dams
Juan de Dios Alemán Velásquez (México)Ramón Verdugo (Chile)Rolando Vega Beirute (Costa Rica)
Tema 12. Dinámica de suelos e ingeniería sísmicaTopic 12. Soils dynamics and earthquake engineering
Adrián Rodríguez Marek (EUA)Gonzalo Montalva (Chile)Raúl Aguilar Becerril (México)
XVI CONGRESO PANAMERICANO DE MECÁNICA DE SUELOS E INGENIERÍA GEOTÉCNICA
XVI PANAMERICAN CONFERENCE ON SOIL MECHANICS AND GEOTECHNICAL ENGINEERING
Co-Chairs Co-Chairs
Co-Chairs
Tema 13. Mejoramiento de suelosTopic 13. Ground improvement
Eduardo Villa Corta Lucchesi (Perú)Hubert Guimont (Canadá)Rémi Chatte (México)
Co-Chairs
Tema 14. Sustentabilidad y geoambiente.Topic 14. Sustainability and geoenvironment.
Elizabeth Burton (EUA)Marcelo Hirschfeldt (Argentina)Moisés Dávila (México)
Co-Chairs
Tema 15. Conservación de sitios históricos.Topic 15. Preservation of historic sites.
Damien Tamagnan (México)Efraín Ovando Shelley (México)
Co-Chairs
Tema 16. Ingeniería forenseTopic 16. Forensics engineering
Edgar E. Rodríguez Granados (Colombia)L. Bernardo Rodríguez (México)Paul W. Mayne (EUA)
Co-Chairs
Tema 17. Mecánica de rocasTopic 17. Rock mechanics
Carlos Carranza Torres (EUA)Sergio Fontoura (Brasil)Valentín Castellanos Pedroza (México)
Co-Chairs
Tema 18. EducaciónTopic 18. Education
Emir José Macari (EUA)Jorge E. Alva Hurtado (Perú)Miguel Ángel Figueras (México)Rigoberto Rivera Constantino (México)
Co-Chairs
Tema 19. Geotecnia de la energía Topic 19. Energy geotechnics
Marcelo Sánchez (EUA)Norma Patricia López Acosta (México)
Co-Chairs
Co-Chairs
Co-Chairs
Co-Chairs
Co-Chairs
Co-Chairs
Co-Chairs
Co-Chairs
Co-Chairs
Co-Chairs
Patrocinios · Sponsorship
Registro · Registration
Evento social · Social Event
Publicidad (previo a la conferencia)Publicity (prior to conference)
Publicidad (durante la conferencia)Publicity (during conference)
Registros a Congreso (con comidas) · Free Registration
Boletos para la cena de gala · Free Tickets for Gala Dinner
Logo en página web · Logo Exposure on Website
Banner en página web · Banner Exposure on Website
Logo en página web de la SMIG · Logo Exposure on SNS Pages
Logo en la aplicación móvil · Logo Exposure on Mobile App
Logo en E-Newsletter · Logo Exposure in E-Newsletter
Logo impreso en la "lona" del evento · Logo Printed on the Event Signage
Anuncio en el programa del evento (color) · Programme Book Advertisement (Color, A4 Size)
Logo impreso en los gafetes del evento · Logo Printed on the Name Badges
Categoría · Category
5
4
·
·
·
·
·
·
1 página · page
·
Diamante más deDiamond more than
$ 30,000 USD
4
3
·
·
·
-
·
·
1 página · page
-
Platino más de Platinum more than
$ 18,000 USD
3
2
·
-
·
-
·
·
1/2 página · page
-
Oro más deGold more than $ 6,000 USD
2
1
·
-
·
-
·
·
1/4 página · page
-
Plata más deSilver more than
$ 3,000 USD
-
-
·
-
-
-
·
·
-
-
Bronce más deBronze more than
$ 1,800 USD
PATROCINIO EN ESPECIE · IN-KIND SPONSORSHIP
BENEFICIOS POR TIPO DE PATROCINIO · BENEFITS FOR SPONSORSHIP
*El patrocinio se ofrece sobre la base del primer oferente, quien tendrá la primera opción. Favor de considerar que las condiciones están sujetas a cambios · * We offer every sponsorship on a “first come, first served” basis and please note that terms and conditions are subject to change.
CATEGORÍA · CATEGORY DETALLES · DETAILS AMOUNT (USD) · COSTO USD
B
C
D
E
F
G
H
Cena de gala · Gala Dinner
Lunch (4 veces) · Lunch (4 Times)
Coffee Break (8 Times) · Coffee Break (8 Times)
Souvenir · Souvenir
Programa Book · Advertisement Programme
Casagrande Lecture · Casagrande Lecture
Sesión Técnica · Technical Session
Título de “Patrocinador oficial del Lunch " · “Sponsor Company Name’s Lunch” Title
Título de “Patrocinador oficial del coffee break " · “Sponsor Company Name’s Coffee Break” Title
Logo impreso en el suvenir · Logo Printed on The Souvenir
Aviso impreso a color en el programa · Full Color Advertisement inside Programme Book
Logo durante la conferencia * · Logo Exposure on Event Signage
Logo durante la sesión técnica* · Logo Exposure on Technical Session
42,000
12,000/time
4,200/time
12,000
1,200
2,000
1,500
Brindis de bienvenida · Welcome ReceptionALogo expuesto durante el evento · Logo Exposure on Event Signage
Logo expuesto en el programa y en la página web · Logo Exposure in Programme Book and on Website
Logo expuesto durante el evento · Logo Exposure on Event Signage Logo expuesto en el programa y en la página web · Logo Exposure in Programme Book and on Website
24,000
Costos de Inscripción · Registration
Notas · Notes : Los costos ya incluyen impuestos · The costs includes taxes Los costos son por persona · The costs are per person Los costos son en USD · The costs are in USD Al pagar se hará la conversión a moneda mexicana (MXN) al tipo de cambio de ese momento · The conversion to Mexican currency (MXN) will be made at the exchange rate of the date that you payed.
Cursos precongreso · Preconference courses
Socios ISSMGE · ISSMGE partners
$100Cena de gala · Gala dinner
Inscripción al congreso PANAMERICANO 2019 · Registration to Panamerican 2019
$200
Hasta el 15 de marzo 2019 · Until March 15th, 2019
Del 16 de marzo hasta el 15 de octubre 2019 · From March 16th to October 15th, 2019
Del 16 de octubre hasta el PANAMERICANO 2019 · From October 16 to the PANAMERICAN 2019
$500
$550
$600
Hasta el 15 de marzo 2019 · Until March 15th, 2019
Del 16 de marzo hasta el 15 de octubre 2019 · From March 16th to October 15th, 2019
Del 16 de octubre hasta el PANAMERICANO 2019 · From October 16 to the PANAMERICAN 2019
$550
$605
$660
No socios ISSMGE · No partners ISSMGE
Notas: Los costos ya incluyen impuestos Los costos son por persona Los costos son en USD Al pagar se hará la conversión a moneda mexicana (MXN) al tipo de cambio de ese momento
11
12
Sociedad Mexicana de Ingeniería GeotécnicaMexican Society of Geotechnical Engineering
International Society for Soil Mechanics and Geotechnical Engineering
El precio del stand sencillo para el primer semestre del 2019 (1º enero a 30 de junio) será de $54,900.00 MXmás impuestos.El anticipo para apartar el espacio será del 50%, la liquidación de la diferencia será actualizando el precio del stand al momento del pago. Cada 6 meses se revisará el precio por parte del Comité Organizador
The price of the single stand for the first half of 2019 (January 1ST to June 31) will be $54,900.00 MX.
The advance to select the space will be 50%, the settlement of the difference will be updating the price of the stand at the time of payment.
Every 6 months the price will be reviewed by the Organizing Committee
Panamerican 2019Cancún Mx.
www.panamerican2019mexico.com · info@panamerican2019mexico.com
Calendario · Calendar
31 de marzo, 2018 · March 31, 2018
Fecha límite para el envío de resúmenes.Abstracts submission deadline.
30 de junio 2018 · June 30, 2018
Notificación de aceptación deresúmenes y apertura de carga de artículos.Notification of acceptance of abstracts and opening for loadingarticles.
10 de marzo, 2019 · March 10, 2019Fecha límite extendida para el envío de artículosPapers submission extended deadline.
30 de junio, 2019 · June 30, 2019Fecha límite de notificación de presentación oral o póster.Notification of oral presentation and posters deadline.
31 de mayo, 2019 · May 31, 2019Fecha límite de notificación de aceptación definitiva de artículos.Deadline notification of accepted papers.
30 de agosto, 2019 · August 30, 2019Fecha límite de inscripción a Congreso para personas que presentarán oralmente o con poster.Deadline for registration to Conference for people who will do an oral presentation or with poster.
Expo · Expo
International Society for Soil Mechanics and Geotechnical Engineering
lety.bernal@ecodsa.com.mxTe. +52(55) 5599-2860www.ecodsa.com.mx
XVI CONGRESO PANAMERICANO DE MECÁNICA DE SUELOS E INGENIERÍA GEOTÉCNICA
XVI PANAMERICAN CONFERENCE ON SOIL MECHANICS AND GEOTECHNICAL ENGINEERING
·
Sociedades cooperadoras · Cooperating Organizations
Acce
soA
cces
o
1
4
5
3
2
9
10
13 14
15 16
17
18
19
20
21
23
25
35
33
34
32
3122
36 37
38
39
40
41
43
44
56
57
58
59
60
63
64
65
67
68
697071727374
54
53
51
62
61
42
50
4845
4746
4m3m
3m
Cont
rols
4966
55
Salón Caribe · Caribbean Hall75 Stands de 3m X 3m
A.P. Van Den Berg
6
7
8
pruebasdinámicasen pilotes, s.a.
1
co�e break
co�e break
DMT
GrupoCalidra
Cimprotek PTC ERS
NGE Contracting
Cursos precongreso · Preconference courses
PC7
PC8
PC9
PC10
PC11
Nuevos criterios de diseño sísmico de cimentaciones y obras térreas en México New seismic design criteria for foundations and embankments in Mexico Coordinador: Ulises Mena Hernández.
Modelado numérico en geotecnia Numerical modelling in geotechnicsCoordinador: José Luis Rangel Núñez.
Análisis de riesgo y confiabilidad en geotecnia Risk analysis and reliability in geotechnicsCoordinador: Moisés Juárez Camarena.
Excavaciones en rocaRock excavations Coordinador: Valentín Castellanos Pedroza.
Estabilización de suelo con cal Soil stabilization with lime Coordinador: Eduardo Botero Jaramillo.
PC1
PC2
PC3
PC4
PC5
PC6
Diseño, construcción y pruebas de anclas Anchors design, construction and testing Coordinador: Juan Paulín Aguirre.
Presas de CCR RCC DamsCoordinador: Amanda Garduño Gallo.
Geotecnia de la energía: de los fundamentos a la prácticaEnergy geotechnics: from the basics to the practiceCoordinador: Norma Patricia López Acosta.
Diseño de pavimentos flexibles, enfoque empírico mecanicista Flexible pavement design, mechanistic empirical approach Coordinador: Paul Garnica Anguas.
Pruebas de campo In situ testingCoordinador: Oliver Nava Tristán.
Diseño y construcción avanzado de micropilotesAdvanced micropile design and constructionCoordinador: Mary Ellen Large.
Foyer Miramar
Foyer Caribe
Miramar 1
Miramar 2
Miramar 3
Isla 1 y 2
Salón Grand Caribe
Isla 3 y 4
Isla 5 y 6Miramar 4
WCWC
WC WC
Location map of rooms in first level
Location map of rooms in mezanine
Mapa de ubicación de salones en primer nivel.
Mapa de ubicación de salones en mezanine
WC
WCSalón ArenaSalón Coral
Salón Bahía
Cursos precongreso · Preconference courses
Miramar 4Miramar 3Miramar 2Miramar 1BahiaIsla 6Isla 5Isla 4Isla 3Isla 2Isla 1Hora
8:30 - 9:00
9:00 - 11:00
11:00 - 11:30
11:30 - 13:30
13:30 - 14:30
14:30 - 16:30
16:30 - 17:00
17:00 - 18:30
Domingo · Sunday 17 de noviembre de 2019 · 17th november 2019
La distribución de los salones es preliminar, cambiará en función de las inscripciones a cada curso.The distribution of the rooms is preliminary, will change depending on the inscriptions to each course.
Coffee Break
Coffee Networking
Lunch
Coffee Break
PC1Anchors design,
construction and testing
PC1Anchors design,
construction and testing
PC1Anchors design,
construction and testing
PC1Anchors design,
construction and testing
PC2RCC Dams
PC3Energy geotechnics: from fundamentals
to practice
PC4Flexible pavement design, mechanistic empirical approach
PC5In situ testing
PC6Advanced
micropile design and construction
PC7New seismic design
criteria for foundations and embankments in Mexico
PC8Numerical modeling
in geotechnic
PC9Risk analysis and reliabilityin geotechnics
PC10Rock excavations
PC11Soil stabilization
with lime
PC3Energy geotechnics: from fundamentals
to practice
PC4Flexible pavement design, mechanistic empirical approach
PC5In situ testing
PC6Advanced
micropile design and construction
PC7New seismic design
criteria for foundations and embankments in Mexico
PC8Numerical modeling
in geotechnic
PC9Risk analysis and reliabilityin geotechnics
PC10Rock excavations
PC11Soil stabilization
with lime
PC3Energy geotechnics: from fundamentals
to practice
PC4Flexible pavement design, mechanistic empirical approach
PC5In situ testing
PC6Advanced
micropile design and construction
PC7New seismic design
criteria for foundations and embankments in Mexico
PC8Numerical modeling
in geotechnic
PC9Risk analysis and reliabilityin geotechnics
PC10Rock excavations
PC11Soil stabilization
with lime
PC3Energy geotechnics: from fundamentals
to practice
PC4Flexible pavement design, mechanistic empirical approach
PC5In situ testing
PC6Advanced
micropile design and construction
PC7New seismic design
criteria for foundations and embankments in Mexico
PC8Numerical modeling
in geotechnic
PC9Risk analysis and reliabilityin geotechnics
PC10Rock excavations
PC11Soil stabilization
with lime
PC2RCC Dams
PC2RCC Dams
PC2RCC Dams
Hora
13:00 - 19:00
17:00 - 19:00
19:00 - 21:00
Early registration
Welcome Cocktail (Caribe) sponsored by ______________
Panamerican Council Meeting
This course focuses on the study of the main physical phenomena and processes that control the behavior of soil. Problems of practical interest in the broad field geo-energy are analy-zed during the course. The fundamental aspects associated with the coupled non-isothermal flow problems are presented. The course also contemplates a brief introduction to the numeri-cal solution of this type of problem. Experimen-tal studies showing the behavior of soils and rocks under THM will be discussed as well, along with key constitutive relationships that can be used in numerical simulations.Further, laboratory-and field-scale physical modeling studies that have been performed to validate simulations will also be discussed.
PC1 PC2
Cursos precongreso · Preconference courses
Diseño, construcción y pruebas de anclas / Anchors design, construction and testing Coordinador / Coordinator: Juan Paulín Aguirre.
Contenido/Content: 1.- Introducción (historia, tipos, materiales) / Introduction (history, types, materials)2.- Normas y recomendaciones /Codes and recommendations3.- Diseño geotécnico y estructural de anclas / Geotechnical and structural design anchors4.- Construcción / Construction5.- Pruebas / Tests6.- Sistemas de contención con anclas / Retaining anchors systems7.- Conclusiones / Conclusions8.- Bibliografía y referencias / Bibliography and references
Contenido/Content: 1.- Introducción / Introduction 2.- Aspectos geotécnicos y otros, para elegir el tipo de presa / Geotechnical aspects and others, to select the type of dam3.- Presas de CCR, pasado y presente / RCC dams, past and present4.- Selección de bancos para agregados y puzolanas / Selection of borrow areas for aggregates and pozzolans5.- Definición en laboratorio de propiedades del CCR para el diseño de la presa / Laboratory definition of RCC properties for the design of dams6.- Metodología básica y criterios de diseño para el diseño de presas de CCR / Basic methodology and design criteria for RCC dams7.- Procedimiento constructivo: mezclado, transporte, rodillado y curado / Constructive procedures: mixing, transport, rolling and curing8.- Detalles constructivos: Juntas, tratamiento para las caras, galerías, etc. / Constructive details: Joint treatment, upstream face treatment, galleries, etc9.- Aspectos críticos del Control de calidad. / Quality control critical aspects
Instructores / Instructors: Rogelio Monroy SalgadoGerente Técnico, Cimentaciones Mexicanas S. A. de C.V.
Juan Paulín AguirreCoordinador de Ingeniería Zona IBEROAMÉRICA, Soletanche-Bachy
Instructores / Instructors: Dr. Ernest SchraderConsultor Internacional de presas de CCR
Ing. Mario Montero CatalánCFE
Ing. Fritzludwig Ballhausen DomínguezCFE
Ing. Amanda Garduño GalloCFE
El curso abarcará las etapas de diseño, construc-ción y pruebas de un sistema de anclaje en suelos. Como diseño y construcción se presenta-rán casos reales e internacionales para ejempli-ficar y reforzar los antecedentes teóricos. Será un curso práctico fomentando la participación y discusión con los asistentes. La bibliografía se entregará al momento de la inscripción. Casos reales nacionales e internacionales.
The course will cover the stages of design, construction and testing of an anchoring system in soils. Design and construction as real and international to exemplify and reinforce the theoretical background presented cases. It will be a workshop encouraging participation and discussion with attendees. The bibliography is provided at time of registration.Real national and international cases
Instructores / Instructors: Marcelo SánchezChair ISSMGE TC308 - Energy GeotechnicsTexas A&M University (USA)
Norma Patricia López AcostaInstituto de Ingeniería UNAM (Mexico)
PC3 Geotecnia de la energía: de los funda-mentos a la práctica / Energy geotechnics: from the basics to the practiceCoordinador / Coordinator: Norma Patricia López Acosta.
Contenido/Content: 1.- Introducción y conceptos básicos / Introduction and basic concepts2.- Flujo saturado en suelos y rocas / Saturated flow in soils and rocks3.- Flujo no saturado (multiphase) en suelos y rocas / Unsaturated (multiphase) flow in soils and rocks4.- Transporte de calor en suelos y rocas / Heat transport in soils and rocks5.- Medios porosos deformables / Deformable porous media6.- Aplicaciones: pilas de energía geotérmicas, sistemas de almacenamiento de calor geotérmico, simulación de yacimientos, estabilidad de pozos, fractura-miento hidráulico / Applications: geothermal energy piles, geothermal heat storage systems, reservoir simulation, borehole stability, hydraulic fracturing
Presas de CCR / RCC DamsCoordinador / Coordinator: Amanda Garduño Gallo.
El curso proporcionará información general acerca de las Presas de CCR, incluyendo las características geotécnicas para su viabilidad, las características idóneas para bancos de agregados, la manera de definir en laboratorio las propiedades necesarias para el diseño, y la metodología para su diseño. Se comentará el procedimiento construc-tivo, incluyendo recomendaciones para el tratamiento de la cara aguas arriba, para el tratamiento de las juntas, y para el control de calidad durante construcción.
This course will provide general information about RCC Dams, including site geotechnical characteristics for its viability, the ideal characteristics for borrow areas, how to define in laboratory the RCC properties required for the design of the dam, and the methodology for the design of these dams. The constructive procedure, including recommendations for the treatment of the upstream face and joint treatment, and the quality control during construction, will be discussed.
Este curso se enfoca en el estudio de los principa-les fenómenos físicos y procesos que controlan el comportamiento del suelo. Durante el mismo, se analizan problemas de interés práctico en el campo de la geo-energía. Se explican los aspectos fundamentales asociados con el acoplamiento del flujo no isotérmico. Igualmente, el curso contem-pla una breve introducción a la solución numérica de este tipo de problema. También se exponen estudios experimentales que muestran el compor-tamiento termo-hidro-mecánico (THM) de los suelos y rocas, además de las relaciones constitu-tivas clave que pueden utilizarse en las simulacio-nes numéricas. Adicionalmente, se discuten los modelos físicos de laboratorio y a escala real que se han implementado para validar simulaciones.
Contenido/Content: 1.- Welcome and Introductions 2.- Introduction and State of Practice, Construction Methods3.- Geotechnical Design Considerations4.- Structural Design Considerations5.- Micropile Materials and Equipment6.- Hollow Core Bars7.- Inspection (QA/QC)8.- Micropile Testing and Performance9.- Lateral Loading and Group Behavior of Micropiles10.- Micropile Case Histories11.- Case Histories12.- Discussion
Instructores / Instructors: • Jesús Gómez • John Wolosick
The history of micropile development in North America since 1980 will be discussed. Topics include how micropiles were initially used as low capacity foundation elements and how their development has led to carrying ultra-high capacities of hundreds of tons.
PC4PC5
Cursos precongreso · Preconference courses
Diseño de pavimentos flexibles, enfoque empírico mecanicista / Flexible pavement design, mechanistic empirical approach
Coordinador / Coordinator: Paul Garnica Anguas.
Contenido/Content: 1.- Introducción al problema de diseño de pavimentos / Introduction to the problem of pavement design2.- Metodología general de los métodos empírico-mecanicistas / General methodology of mechanistic-empirical methods
3.- Teorías para el cálculo de esfuerzos y deformaciones / Theories for the calculation of stress and strain4.- Caracterización del tránsito vehicular / Characterization of vehicular traffic5.- Propiedades de los suelos y materiales granulares / Properties of soils and granular materials6.- Propiedades de las mezclas asfálticas / Properties of asphalt mixtures7.- Modelos de deterioro y cálculo de la vida útil / Deterioration models and calculation of life8.- Efectos climáticos a considerar / Climatic effects to consider9.- Estimación de la incertidumbre / Estimation of uncertainty10.- Estudios de caso / Case studies Guía AASHTO empírico-mecanicista / AASHTO Guide mechanistic-empirical Método del II-UNAM / Method II-UNAM Método del IMT-PAVE / Method IMT-PAVE Método de la UCR / UCR method Otros / Others11.- Conclusiones y Discusión / Conclusions and Discussion
Contenido/Content: 1.- Piezocono (CPTu) / Piezocone (CPTu)2.- Veleta (VST) / Weathervane (VST)3.- Dilatómetro (DMT) / Dilatometer (DMT)4.- Presiómetro (PMT) / Pressuremeter (PMT)
Instructores / Instructors: Alexandra OssaUNAM
Luis Guillermo LoriaUCR
Paul GarnicaIMT
Se presentan las tendencias actuales para análisis y diseño de pavimentos con los métodos llamados mecanicistas, que involucran el cálculo del estado de esfuerzos y deformaciones en la estructura de pavimento, caracterizada a su vez por los módulos resilientes de las capas de suelo compactadas y los módulos dinámicos de las capas asfálticas. Se discuten los aspectos teóricos y prácticos relaciona-dos con lo anterior, además de la importancia en la determinación de los modelos de deterioro que permiten una estimación de la vida útil según los indicadores de desempeño deseados. Se discuten aspectos sobre la calibración necesaria de las ecuaciones involucradas, el uso de los ensayes acelerados de pavimentos en este contexto y la necesidad de considerar que el diseño moderno de pavimentos necesita ser visto como una parte de la gestión integral de los activos de toda red carretera.El curso tiene los siguientes objetivos:1. Revisar las metodologías empírico-mecanicistas para diseño de pavimentos flexibles existentes.2. Proporcionar un foro para que los asistentes intercambien experiencias sobre esta temática.
Current trends for analysis and design of pavements with methods called mechanistic, involving the calculation of the state of stresses and strains in the pavement structure, character-ized in turn by the resilient modulus of compacted soil layers and modules presented dynamic of the asphalt layers. the theoretical and practical aspects of this, and the importance in determining impair-ment models that allow an estimate of the useful life according to the desired performance indica-tors discussed. aspects of the necessary calibration equations involved, the use of accelerated assay-ing pavement in this context and the need to consider that modern pavement design needs to be seen are discussed as part of the overall management of the assets of all network highway.The course has the following objectives:1. Review mechanistic-empirical design method-ologies for existing flexible pavements.2. To provide a forum for attendees to share experiences on this subject.
Pruebas de campo / In situ testing
Coordinador / Coordinator: Oliver Nava Tristán.
En este curso, reconocidos ingenieros en la mate-ria expondrán las técnicas de exploración in situ de mayor uso y aplicación en el contexto internacio-nal, transmitiendo su experiencia sobre las mejores prácticas para la ejecución en campo, post proceso de datos e interpretación, correlacio-nes y aplicaciones.
In this course, recognized engineers in the field will present exploration techniques in situ increased use and application in the international context, conveying their experience on best practices for implementation in the field, post data processing and interpretation, correlations and applications.
Instructores / Instructors: • Fernando Schnaid (Brasil)• Prof. - John Howie (Canada)
• Luis Ángel Vargas (Costa Rica)
PC6 Diseño y construcción avanzado de micropilotes / Advanced micropile design and construction
Coordinador / Coordinator: Mary Ellen Large.
Welcome and Introductions• Dr. Jesús Gómez, P.E., D.GE, GEI Consultants, Inc.
• John Wolosick, P.E., D.GE, Hayward Baker, Inc.
Introduction and State of Practice, Construction MethodsJohn Wolosick, P.E., D.GE, Hayward Baker, Inc.
The history of micropile development in North America since 1980 will be discussed. Topics include how micropiles were initially used as low capacity foundation elements and how their development has led to carrying ultra-high capacities of hundreds of tons.
Geotechnical Design ConsiderationsDr. Jesús Gómez, P.E., D.GE, GEI Consultants, Inc.
This presentation will focus on the geotechnical aspects of micropile design, including presumptive bond strength values for design of micropiles in various geological formations. It will explain the procedure for micropile design and verification and uplift, compression and lateral loading will be discussed.
Structural Design ConsiderationsDr. Jesús Gómez, P.E., D.GE, GEI Consultants, Inc.
This presentation focuses on special considerations related to the structural design and performance of micropiles. Fundamental structural design of the micropile cross section, special characteristics of micropile materials, and application of building codes are discussed. It concludes with the topic of strain compatibility.
Micropile Materials and EquipmentJohn Wolosick, P.E., D.GE, Hayward Baker, Inc.
Hollow Core BarsJohn Wolosick, P.E., D.GE, Hayward Baker, Inc.
This presentation will explain the hollow bar micropile, its components, and the major benefits of the system. It will cover the installation and testing procedures, equipment used to achieve the maximum benefits, and structural and geotechnical design relative to building codes and site specific geotechnical reports.
Inspection (QA/QC)John Wolosick, P.E., D.GE, Hayward Baker, Inc.
With any good foundation system, quality control is key. This session will outline the critical elements of the micro-pile QC program and important elements for the engineer to recognize in design and construction.
Micropile Testing and PerformanceDr. Jesús Gómez, P.E., D.GE, GEI Consultants, Inc.
Load testing is an important part of almost every micropile project. Topics covered will include: typical procedures and equipment, new ASTM rules, strain gauges, acceptance criteria, and apparent elastic length.
Cursos precongreso · Preconference courses
PC6 Diseño y construcción avanzado de micropilotes / Advanced micropile design and construction
Coordinador / Coordinator: Mary Ellen Large.Lateral Loading and Group Behavior of MicropilesDr. Jesús Gómez, P.E., D.GE, GEI Consultants, Inc.
Lateral loads frequently govern the size of the micropile casing. Topic present include: Loadings, typical lateral load test setup, comparison of lateral tests results to predictions (LPILE, NAVFAC, and Characteristic Load Method), combined stresses, options for increasing lateral resistance, analysis for battered piles, and “fixity” what is it? Can it be achieved? The intent is to demonstrate that properly designed micropiles and micropile groups can be designed to support lateral loads.
Micropile Case HistoriesJohn Wolosick, P.E., D.GE, Hayward Baker, Inc.Dr. Jesús Gómez, P.E., D.GE, GEI Consultants, Inc.
Micropiles are used on a variety of innovative and challenging international micropile applications.
Case Histories
Discussion
Dr. Jesús Gómez, P.E., D.GE Dr. Jesús Gómez has more than 30 years of design and construction experience in geotechnical projects in the United States, South America and the Caribbean. Dr. Gómez has an extensive geotechnical construction background, having acted as Design Engineer and Chief Engineer in foundation contracting organizations, includ-ing Franki Pile Venezuela, where he designed over 300 high-rise foundation, excavation support and slope stabilization projects. Dr. Gómez has been the lead designer for numerous design and research projects of importance that incorporate technological advancements such as Micropiles, Soil Nailing, Single Bore Multiple Anchors (SBMA), Compressive Anchors, Removable Anchors, Grouting and Vibro-Replacement. He has extensive experience in design of deep foundations and excavation support and has completed ground-breaking work on numerical modeling of soil-structure systems. Dr. Gómez has authored or co-authored over 50 publications on practical technological applications and design in geotechnical engineering.
John Wolosick P.E., D.GEJohn R. Wolosick is director of engineering for Hayward Baker Inc., Atlanta, Georgia. From this home base, he works on projects all across the U.S. Wolosick has more than 39 years of experience in geotechnical engineering and contracting and has authored more than 35 technical papers. Wolosick is the recipient of the 2008 ASCE Geo-Institute Martin S. Kapp Foundation Engineering Award. He is the immediate past president of DFI (2014-2016) and former co-chair of the ADSC/DFI Micropile committee (2004-2007). He served as a member of the ASCE Earth Retaining Structures committee for 30 years and is past chair of the ASCE Georgia Section Geotechn-ical Committee (2003-2005). Wolosick was named the Georgia Society of Professional Engineers 'Engineer of the ear - Industry' in 2017. He holds B.S. and M.S. degrees in civil engineering from the University of Illinoisat Urbana-Champaign.
PC7
Cursos precongreso · Preconference courses
Nuevos criterios de diseño sísmico de cimentaciones y obras térreas en México / New seismic design criteria for foundations and embankments in Mexico Coordinador / Coordinator: Ulises Mena Hernández.
Contenido/Content: 1.- Espectros de diseño sísmico para el territorio mexicano / Seismic design spectra for the Mexican territory2.- Interacción suelo-estructura / Interaction soil-structure3.- Cimentaciones superficiales / Shallow foundations4.- Cimentaciones profundas / Deep foundations5.- Muros de retención / Retaining walls6.- Túneles y lumbreras / Tunnels and ports7.- Tuberías enterradas / Buried pipes
Contenido:
• Presentación del curso 1.- Estado de arte de la interacción suelo-estructura (Por definir) 2.- Ecuaciones constitutivas de suelos(Dr. Alejo Sfriso)3.- Introducción a la interacción suelo-estructura (Dr. José Luis Rangel)4.- Modelado numérico de interacción suelo-estructura estático(Dr. José Luis Rangel) • Receso (Café, té y galletas)5.- Ejemplos de modelado numérico de cimentaciones y túneles (Ing. Luis Alberto Cruz López)• Comida 6.- Interacción suelo-estructura dinámica (Dr. Luciano Fernández)7.- Modelado numérico de interacción suelo-estructura dinámico (Dr. José Luis Rangel)8.- Ejemplo de modelado analítico y numérico (Ing. Omar Franco)
Content:
• Course presentation1.- State of art of soil-structure interaction (TBD)2.- Soil constitutive equations (Dr. Alejo Sfriso)3.- Introduction to soil-structure interaction (Dr. Jose Luis Rangel)4.- Numerical modeling of soil-structure interaction static(Dr. Jose Luis Rangel)• Break (Coffee, tea and cookies) 5.- Examples of numerical modeling of founda-tions and tunnels (Luis Alberto Cruz López Ing.)• Lunch 6.- Interaction soil-structure dynamic (Dr. Luciano Fernández)7.- Numerical modeling of dynamic soil-structure interaction (Dr. Jose Luis Rangel)8.- Example analytical and numerical modeling (Omar Franco Ing.)
Instructores / Instructors: Dr. Ulises Mena HernándezGerente de Ingeniería Civil, Instituto Nacional de Electricidad y Energías Limpias
Dr. Luis Eduardo Pérez RochaInvestigador, Instituto Nacional de Electricidad y Energías Limpias
M.I. Nicolas Ageo Melchor García Investigador, Instituto Nacional de Electricidad y Energías Limpias
Dar a conocer la actualización de criterios empleados en el diseño de cimentaciones y obras terreas publicadas en la nueva versión 2015 del Capítulo de Diseño por Sismo del Manual de Obras Civiles de CFE. Asimismo, exponer las metodologías para la obtención de fuerzas sísmicas y de análisis enfocadas a los efectos de interacción suelo- estructura. Realizar ejemplos de aplicación para casos prácticos
Introduce updating criteria used in the design of foundations and earthy works published in the new version of Chapter 2015 of the Manual Earthquake Resistant Design of Civil Works CFE. Also expose the methodologies for obtaining and analyzing seismic forces focused on the effects of soil-structure interaction. Make application examples for practical cases
ExpositoresDr. Luciano Fernández. UAM-Azcapotzalco (México)Dr. Alejo Sfriso. (Argentina)Dr. José Luis Rangel Núñez. UAM-Azcapotzalco (México)Ing. Luis Alberto Cruz López. UAM-Azcapotzalco (México)Ing. Omar Franco. UAM-Azcapotzalco (México)
REQUISITOS• Conocer los aspectos básicos de los programas que se emplean en el curso (Mathcad, Matlab, Deepsoil, Sap, Elpla, Midas).• Tener dominio del método de elementos finitos, mecánica del medio continuo, ecuaciones constitutivas de suelos y rocas, dinámica de suelos y programación.• Traer laptop con los programas siguientes ya instalados: Mathcad, Matlab, Deepsoil, SAP y ELPLA.
PROGRAMAS DE COMPUTO EMPLEADOS EN EL CURSOSe emplearán los programas de cómputo siguientes: MATHCAD, MATLAB, DEEPSOIL, SAP, ELPLA y MIDAS (GEN y GTS).En el curso se proporcionarán computadoras con los programas MIDAS Gen y Gts nx. Los demás programas deberán traerse cargados en las laptops de los usuarios. Las ligas para obtener las versiones de tiempo determinado de los programas son: MATHCAD: https://www.ptc.com/es/try-and-buy/free-trialsMATLAB: https://la.mathworks.com/DEEPSOIL: http://deepsoil.cee.illinois.edu/SAP: https://www.csiamerica.com/products/sap2000ELPLA: https://geotecsoftware.com/buy/product/download/file_id-11 MIDAS: http://en.midasuser.com/download/main.asp
PC8 Modelado numérico en geotecnia Numerical modelling in geotechnicsCoordinador / Coordinator: José Luis Rangel Núñez.
• Conocer las estrategias de modelado numérico para estudiar la interacción suelo-estructura en condiciones estáticas y dinámicas, así como el diseño estático de túneles.• Calibrar los modelos numéricos con soluciones analíti-cas, tanto estáticas como dinámicas.• Conocer el preproceso de señales a fin de optimizar el modelo numérico dinámico.• Conocer los aspectos particulares de los programas que se emplean en el curso para hacer el análisis de interacción suelo-estructura.• Conocer las ecuaciones constitutivas básicas para llevar a cabo los análisis de interacción suelo-estructura.• Evaluar las condiciones de falla y de servicio del sistema edificio-cimentación-subsuelo.
• Know the strategies of numerical modeling to study the interaction soil-structure in static and dynamic conditions, as well as the static design of tunnels.• Calibrate numerical models, both static and dynamic analytical solutions.• Knowing the signal preprocessing to optimize the dynamic numerical model.• Knowing the particular aspects of the programs used in the course for the analysis of soil-structure interaction.• Knowing the basic constitutive equations to perform the analysis of interaction soil-structure.• Evaluate fault conditions and building service-foundation-ground system.
PC9
Cursos precongreso · Preconference courses
Análisis de riesgo y confiabilidad en geotecnia / Risk analysis and reliability in geotechnics
Coordinador / Coordinator: Moisés Juárez Camarena.
Contenido/Content: 1.- Conceptos elementales de riesgo y confiabilidad. / Elementary concepts of risk and reliability.2.- Herramientas necesarias para la cuantificación del riesgo / Tools required for risk quantification.3.- Confiabilidad estructural de componentes / Structural reliability of components4.- Confiabilidad estructural de sistemas / Structural reliability of systems5.- Ejemplos de aplicación a obras geotécnicas / Examples of application to geotechnical works6.- Comentarios finales y perspectivas / Concluding remarks and perspectives
Instructores / Instructors: Dr. Felipe Vázquez GuillénInstituto de Ingeniería, UNAM
Dr. Gabriel Auvinet Guichard Instituto de Ingeniería, UNAM
Proporcionar a los participantes las herramientas necesarias para realizar análisis cuantitativos de riesgo y confiabilidad en la práctica de la ingeniería geotécnica. Para fines prácticos, los análisis de riesgo en ingeniería usualmente se realizan en tres etapas principales: 1) Identificación, 2) Valoración y 3) Administración. Este tipo de análisis pueden ser cualitativos o bien cuantitativos. Un análisis cualita-tivo del riesgo se limita al desarrollo de las etapas 1 y 3, mientras que un análisis cuantitativo requie-re además el desarrollo de la etapa 2. En este último caso, se realiza una estimación explícita de la probabilidad de falla --y de su complemento a la unidad: la confiabilidad-- y se evalúan las conse-cuencias identificadas en caso de ocurrir el peligro. Las metodologías para estimar el riesgo y la confia-bilidad se explican a través de ejemplos ilustrativos en donde se analizan: Taludes, Cimentaciones y Túneles, entre otras obras.
Provide participants with the necessary to perform quantitative risk analysis and reliability in the practice of geotechnical engineering tools. For practical purposes, the engineering risk analysis usually performed in three main stages: 1) identification, 2) Valuation and 3) Administra-tion. This type of analysis can be qualitative or quantitative. A qualitative analysis of risk is limited to the development of stages 1 and 3, whereas quantitative analysis also requires the development of step 2. In the latter case, an explicit estimate of the probability of failure is performed -and its complement unit: the confiabilidad-- and consequences identified if the danger occur are evaluated. Methodologies for estimating the risk and reliability are explained through illustrative examples which analyze: Tali, Foundations and tunnels, among other works.
PC10 Excavaciones en roca / Rock excavations
Coordinador / Coordinator: Valentín Castellanos Pedroza.
Contenido/Content: 1.- Introducción / Introduction2.- Revisión de conceptos fundamentales de geo-mecánica, incluyendo mecánica de rocas y suelos / Review of fundamental concepts, including geo-mechanical rock and soil mechanics3.- Diseño y análisis de estabilidad de excavaciones superficiales / Design and stability analysis of surface excavations4.- Diseño y análisis de estabilidad de excavaciones subterráneas / Design and stability analysis of underground excavations5.- Los métodos numéricos como herramientas de Diseño y análisis en mecánica de rocas / Numerical methods as tools for design and analysis in rock mechanics6.- Ejemplos de Diseño y análisis de excavaciones / Examples Design and analysis of excavations7.- Discusión / Discussion
Instructores / Instructors: Dr. Carlos Carranza-TorresCatedrático de tiempo completo en el Departamento de Ingeniería Civil de la Universidad de Minnesota, Campus de Duluth
El curso presenta aspectos fundamentales del diseño y análisis de excavaciones superficiales y subterráneas desde una perspectiva mecánica racional. Primeramente, se revisan los conceptos básicos de la mecánica de rocas y suelos pertinen-tes al tratamiento racional de excavaciones. Segui-damente, se discuten los métodos racionales normalmente utilizados en la práctica de diseño y análisis de excavaciones superficiales y subterrá-neas. Se discute además el rol de los métodos numéricos en el proceso de diseño, incluyendo la utilización códigos comerciales (y no-comerciales) basados en elementos finitos, diferencias finitas, elementos discretos y otros. Se presentan ejemplos prácticos de diseño con aplicaciones a taludes y túneles en ingeniería civil y minera. Se provee de una lista completa de bibliografía básica relaciona-da a los distintos tópicos discutidos en el curso.
The course presents fundamental aspects of the design and analysis of surface and underground excavations from a rational mechanical perspec-tive. First, the basics of rock mechanics and soil relevant to rational treatment of excavations are reviewed. Then rational methods normally used in the practice of design and analysis of surface and underground excavations are discussed. the role of numerical methods in the design process is also discussed, including commercial use (and non-commercial) codes based on finite element, finite difference, and other discrete elements. practical examples of design applications embankments and tunnels in civil engineering and mining are presented. It provides a compre-hensive list of basic literature related to the various topics discussed in the course.
PC11
Cursos precongreso · Preconference courses
Estabilización de suelo con cal / Soil stabilization with lime
Coordinador / Coordinator: Eduardo Botero Jaramillo.
Contenido/Content: 1.- Introducción / Introduction2.- Definición de problemática / Definition of problem3.- Objetivos de la estabilización / Stabilization targets4.- Aspectos generales / General features5.- La cal / Lime6.- Los efectos de la cal sobre suelos arcillosos / The effects of lime on clayey soils7.- Factores a considerar para la aplicación de la cal en los suelos / Factors to consider for the application of lime in the soil
8.- Suelos con presencia de sulfatos y su estabilización / Soils with sulphates and stabilization9.- Protocolo de estabilización de suelos con cal / Protocol soil stabilization with lime10.- Métodos y recomendaciones constructivas de aplicación / Construction methods and application recommendations
11.- Experiencias de la estabilización de suelos arcillosos en el mundo / Experiences of stabilizing clayey soils in the world
Instructores / Instructors: Dr. Dallas Little Dr. Zenon Medina M.I. Edgar Mario Amaya
Presentar a los ingenieros de la práctica la técnica de mejoramiento químico de suelos arcillosos a nivel superficial, comúnmente conocida como estabilización de suelos, mediante la aplicación de Óxido de Calcio, CaO. Presentar los efectos físico-químicos inducidos por la estabilización a los materiales arcillosos en estado natural, así como las modificaciones a corto y largo plazo de las mezclas. Identificar las limitantes de su aplicación y los beneficios en proyectos en el ámbito de las vías terrestres y de la geotecnia, como: la construcción de superficies de rodamiento competentes durante la construcción de infraestructura civil o como parte estructural de pavimentos y plataformas de trabajo, propiciando ahorros en tiempos y costos de construcción, además de permitir el empleo de los materiales naturales del sitio.
Engineers present practice chemical enhancement technique clayey soil surface level, commonly known as soil stabilization by application of calcium oxide, CaO. Present the physical-chemical stabilization effects induced by the clay materials in the natural state, as well as modifications to short and long term of mixtures. Identify limiting its application and benefits on projects in the field of the roads and geotechnics, such as building surfaces competent bearing during the construc-tion of civil infrastructure or as a structural part of pavements and work platforms, encouraging savings in construction time and costs, as well as allowing the use of natural materials from the site.
Programa técnico · Technical schedule
Poster session 1 to 6
Poster session 1 to 6
TC Workshops or Meetings
Lunes · Monday18 de noviembre de 2019 · 18th november 2019
Dr. Gabriel Auvinet Guichard
Coffee Break
Coffee Break
State of art and state of practice
of geotechnical engineeringCo-chairs: Tim Newson, Alejo Sfriso
Lunch
SE1Young geotechnicalengineers session
session 1Laboratory and in situ
testing
session 2Analytical
and Physical modelling
in geotechnics
session 3Numerical
modelling in geotechnics
session 4Unsaturated
soils
session 5Soft Soils
session 6Foundations and retaining
structures
session 1Laboratory and in situ
testing
Co-chairs: S1 Heraldo Luis Giacheti (Brasil), Iván Rivera (Canadá), Osvaldo Flores (México)S2 Alejandro Martínez Vela (EUA), Celestino Valle Molina (México), Marcio de Souza Soarez de Almeida (Brasil), Marcos Orozco Calderón (México)S3 Alejo Sfriso (Argentina), José Luis Rangel Núñez (México), Richard Wan (Canada)
S4 Alfredo Zepeda Garrido (México), Eduardo Rojas González (México), John McCartney (EUA), Laureano R. Hoyos (EUA/Colombia)S5 Jorge Alberto Rodríguez (Colombia), Manuel J. Mendoza López (México)S6 Jarbas Militizky (Brasil), Mary Ellen Large (EUA), Alessandro Mandolini (Italia) , Walter Paniagua (México)
session 2Analytical
and Physical modelling
in geotechnics
session 3Numerical
modelling in geotechnics
session 4Unsaturated
soils
session 5Soft Soils
session 6Foundations and retaining
structures
session 1Laboratory and in situ
testing
session 2Analytical
and Physical modelling
in geotechnics
session 3Numerical
modelling in geotechnics
session 4Unsaturated
soils
session 5Soft Soils
session 6Foundations and retaining
structures
Poster session 1 to 6
Foyer CaribeBahiaArenaCoralMiramar 3 y 4Miramar 2Miramar 1Isla 5 y 6Isla 3 y 4Isla 1 y 2Hora
8:15 - 9:00
9:00 - 10:00
10:00 - 10:15
10:15 - 11:45
11:45 - 12:15
12:15 -13:15
13:15 - 14:45
14:45 - 16:15
16:15 - 16:45
16:45 - 18:00
Opening Ceremony
Casagrande LectureGeotechnical engineering in spatially variable soft soils
Dr. Gabriel Auvinet Guichard
Coffee Break
TC 307Sustainability
workshop
Gabriel Auvinet obtained a Doctor degree in Engineering from UNAM, Mexico in 1986. He is a Researcher at Instituto de Ingeniería (Institute of Engineering), UNAM (National University of Mexico) and Faculty member of UNAM Postgraduate program. He was a guest Professor in the French Universities of Grenoble (1986), Nancy (1993-1994) and Clermont (2003-2004). He has directed a large number of professional, master and doctoral theses and is author of 325 papers in Journals and National and International Conferences and 225 research reports. He is presently Head of the Geotechnical Computing Laboratory of Institute of Engineering, UNAMHe has dedicated his research work to Soil Mechanics with emphasis on special foundations and tunnels in consolidating soft soils. Simultaneously, he has developed new techniques for application of probabilistic and geostatistical methods in Civil Engineering. He has been involved as a consultant in many large projects in Mexico, Central and South America and Europe. He performed geostatistical and geomechanical analyses for the design of award-winning Rion-Antirion bridge foundation in Greece.Professor Auvinet has been President of the Mexican Society for Soil Mechanics (SMIG, 1992-1993) and Vice President for North America of International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE, 2009-2013). He has received a number of teaching and research awards in Mexico, France and South America. From 2001 to 2009 he chaired ISSMGE’s Technical Committee TC36: “Foundation Engineering in difficult soft soils conditions”. In 2002 he delivered the Sixteenth “Nabor Carrillo” Lecture: “Uncertainty in Geotechnical Engineering”. He is a member of the Mexican Science Academy, and National Engineering Academy of Mexico. In 2015, He received a Doctor Honoris Causa degree from Universidad Nacional de Córdoba. Argentina. He is author of the updated version (2017) of the internationally known book “The subsoil of Mexico City”.
SE1 Lucy Wu (USA), Tim Newson (USA) Y Alejo Sfriso (Argentina).
SE2Women in
geotechnical engineering
TC Workshops or Meetings
TC Workshops or Meetings
TC Workshops or Meetings
TC 211 Ground
Improvement
Elementos constructivos del área maya: Evidencias arqueológicas y etnográficas.
Tomás Pérez Suárez
History and future of industry/academia partnership Part 1Co-chairs: Mary Ellen Large, Juan Paulin
Poster session 7 to 12
Poster session 7 to 12
Poster session 7 to 12
Martes · Tuesday19 de noviembre de 2019 · 19th november 2019
Foyer CaribeBahiaArenaCoralMiramar 3 y 4Miramar 2Miramar 1Isla 5 y 6Isla 3 y 4Isla 1 y 2Hora
9:00 - 10:00
10:00 - 10:15
10:15 - 11:45
11:45 - 12:15
12:15 -13:15
13:15 - 14:45
14:45 - 16:15
16:15 - 16:45
16:45 - 18:00
19:30 - 23:00
Coffee Break
Thematic night: The Ball Game
Coffee Break
Coffee Break
Lunch
Programa técnico · Technical schedule
session 7Excavations and tunnels
session 8Offshore
Geotechnics
session 9Transportation in geotechnics
session 10Natural Hazards
session 11Embankments and tailings
dams
session 12Soils Dynamics and earthquake
engineering
session 7Excavations and tunnels
session 8Offshore
Geotechnics
session 9Transportation in geotechnics
session 10Natural Hazards
session 10Natural Hazards
session 11Embankments and tailings
dams
session 12Soils Dynamics and earthquake
engineering
session 7Excavations and tunnels
session 8Offshore
Geotechnics
session 9Transportation in geotechnics
session 11Embankments and tailings
dams
session 12Soils Dynamics and earthquake
engineering
TC 308
Energy geotechnics
workshop
TC Workshops or Meetings
TC Workshops or Meetings
TC Workshops or MeetingsTC 308
Energy geotechnics
workshop
Co-chairs: S7 Andrés Marulanda Escobar (Colombia), Juan Jacobo Schmitter Martín del Campo (México), Luis Guilherme de Mello (Brasil)S8 Diego Cruz Roque (México), José Parra (Venezuela), Rachel Guerreiro Basilio Costa Genzani (Brasil), Victor M. Taboada Urtuzuástegui (EUA)S9 Alexandra Ossa López (México), Gloria Beltrán Calvo (Colombia), Luis Guillermo Loria Salazar (Costa Rica), Paul Garnica Anguas (México)
S10 Hernán Eduardo Martínez Carvajal (Colombia), Juan Félix Rodríguez (Brasil), Renato Pinto da Cunha (Brasil), Roberto Terzariol (Argentina)S11 Juan de Dios Alemán Velásquez (México), Ramón Verdugo (Chile), Rolando Vega Beirute (Costa Rica)S12 Adrián Rodríguez Marek (EUA), Gonzalo Montalva (Chile), Raúl Aguilar Becerril (México)
SE2 Norma Patricia López-Acosta (México), Mary Ellen Large (EUA)
session 19Energy
geotechnics Elementos constructivos del área maya.Evidencias arqueológicas y etnográficas
El quehacer diario de los pueblos mayas, como en toda sociedad, variaba deacuerdo al estatus de cada individuo. Todos cumplían una función específica en el mantenimiento del orden económico y político que sustentaba la ideología social y religiosa imperante en cada periodo. Género, grupo de edades, residencia rural o urbana y oficios, eran factores que igualmente determinaban diferencias en la vida cotidiana de cada persona y el espacio construido y habitado.Las ciudades estados del área maya con sus extensas plazas, grandestemplos, suntuosos palacios, canchas para el juego de pelota, altares y magnascalzadas, albergaban igualmente edificios relacionados con la administración y el almacenamiento de tributos: pago en especie que la clase productora entregaba al estado para su mantenimiento. Por su parte el paisaje rural, productor de alimentos y materias prima, igualmente fue objeto de modificaciones constructivas que facilitaban la explotación de recursos renovables y no renovables que, en gran parte, satisfacía las necesidades materiales de la población urbana.
Tomás Pérez Suárez
Arqueólogo egresado de la Escuela Nacional de Antropología e Historia.Cuenta con una Maestría en Estudios Mesoamericanos, Facultad de Filosofía yLetras, UNAM. Es investigador y coordinador del Centro de Estudios Mayas delInstituto de Investigaciones Filológicas, UNAM. Ha tenido participación en distintas curadurías en México, Venecia, Sao Paulo, Paris y Liverpool. Autor de decenas de textos especializados en la cultura maya y en la arqueología mexicana. Ha sido docente en México, Guatemala, Roma y Japón.
Tomás Pérez SuárezArqueólogo
Programa técnico · Technical schedule
Miércoles · Wednesday20 de noviembre de 2019 · 20th november 2019
Plenary Lecture ISSMGE President
Charles Ng
History and future of industry/academia partnership Part 2
Co-chairs: Mary Ellen Large, Juan Paulin
Poster Session 13 to 18
Poster Session 13 to 18
Poster Session 13 to 18
TC Workshopsor Meetings
TC 202Transportation
workshop
TC Workshops or Meetings
Foyer CaribeBahiaArenaCoralMiramar 3 y 4Miramar 2Miramar 1Isla 5 y 6Isla 3 y 4Isla 1 y 2Hora
9:00 - 10:00
10:00 - 10:15
10:15 - 11:45
11:45 - 12:15
12:15 -13:15
13:15 - 14:45
14:45 - 16:15
16:15 - 16:45
16:45 - 18:00
18:00 - 18:30
19:30 - 23:00
Coffee Break
Clousure Ceremony
Gala dinner: Mexican Party (Miramar salon)
Coffee Break
Coffee Break
Lunch
session 13Ground
improvement
session 14Sustainability
and
geoenvironmen
session 15Preservation
of historic sites
session 16Forensics
engineering
session 17Rock
mechanics
session 18Education
session 13Ground
improvement
session 14Sustainability
and
geoenvironmen
session 15Preservation
of historic sites
session 16Forensics
engineering
session 17Rock
mechanics
session 18Education
session 13Ground
improvement
session 14Sustainability
and
geoenvironmen
session 15Preservation
of historic sites
session 16Forensics
engineering
session 17Rock
mechanics
session 18Education
TC 201Dykes and
Leeves workshop
TC 205Safety and
Serviceability workshop
TC 205Safety and
Serviceability workshop
Co-chairs: S13 Eduardo Villa Corta Lucchesi (Perú), Hubert Guimont (Canadá), Rémi Chatte (México)S14 Elizabeth Burton (EUA), Marcelo Hirschfeldt (Argentina), Moisés Dávila (México)S15 Damien Tamagnan (México), Efraín Ovando Shelley (México)
S16 Edgar E. Rodríguez Granados (Colombia), L. Bernardo Rodríguez (México), Paul W. Mayne (EUA)S17 Carlos Carranza Torres (EUA), Sergio Fontoura (Brasil), Valentin Castellanos Pedroza (México)S18 Emir José Macari (EUA), Jorge E. Alva Hurtado (Perú), Miguel Ángel Figueras (México), Rigoberto Rivera Constantino (México)S19 Marcelo Sánchez (EUA), Norma Patricia López Acosta (México)
Charles Ng
Conferencistas Magistrales · Keynote Lecture Speakers
Osvaldo Flores
Session 1Laboratory and in situ testing
Jorge Zornberg
Session 2Analytical and physical modelling in geotechnics
Eduardo Rojas
Session 4Unsaturated soils
Anne Lemnitzer
Session 6Foundations and retaining structures
Werner Bilfinger
Session 7Excavations and tunnels
Per Magnus Sparrevik
Session 8Offshore Geotechnics
Phillip Watson
Session 8Offshore Geotechnics
Session 9Transportation in Geotechnics
Gonzalo ZambranoMarcos Massao Futai
Session 14Sustainability and geoenvironment
Carlo Viggiani
Session 15Preservation of historic sites
Lyesse Laloui
Session 19Energy geotechnics
Session 10Natural Hazards
Manuel R. Villaraga
Session 11Embankments and tailing dams
Ross Boulanger
Session 12Soils Dynamics and earthquake engineering
Session 14Sustainabilityand geoenvironment
Erol Tutumluer Richard Chalaturnyk