T4L – NSW DET SOE

Post on 30-Dec-2015

41 views 0 download

Tags:

description

T4L – NSW DET SOE. Muticasting an Image. Problem. New T4L computers use SATA HDD’s SATA drives are not recognised by Current DET Licensed version of Ghost V7.01 Corporate Edition Attempts to ghost from a floppy boot disk result in error 24010. Windows Domains. - PowerPoint PPT Presentation

Transcript of T4L – NSW DET SOE

T4L – NSW DET SOET4L – NSW DET SOEMuticasting an ImageMuticasting an Image

ProblemProblem

New T4L computers use SATA HDD’s

SATA drives are not recognised by Current DET Licensed version of GhostV7.01 Corporate Edition

Attempts to ghost from a floppy boot disk result in error 24010.

New T4L computers use SATA HDD’s

SATA drives are not recognised by Current DET Licensed version of GhostV7.01 Corporate Edition

Attempts to ghost from a floppy boot disk result in error 24010.

Windows DomainsWindows Domains

If the PC has been joined to a Windows domain you must run the following registry patch BEFORE capturing an image.C:\DETapps\Support\Source\~scripts\dompassw.reg

By default, Windows automatically changes the password on the local computer account at regular intervals

When you restore an image it will have an 'old' domain computer account password and so the Windows domain will reject the computer ie. prevent the PC from rejoining the domain again

NB. This is the domain computer account and NOT a user account.

If the PC has been joined to a Windows domain you must run the following registry patch BEFORE capturing an image.C:\DETapps\Support\Source\~scripts\dompassw.reg

By default, Windows automatically changes the password on the local computer account at regular intervals

When you restore an image it will have an 'old' domain computer account password and so the Windows domain will reject the computer ie. prevent the PC from rejoining the domain again

NB. This is the domain computer account and NOT a user account.

Ghost MulticastGhost Multicast

1. Download Necessary Files2. Prepare ASI computers – network

drivers3. Set up “Model”4. Setup Multicast Server5. Take image of Model – whole disk6. Multicast image to all Targets – whole

disk7. Perform Post imaging tasks8. Create Local Current Image

1. Download Necessary Files2. Prepare ASI computers – network

drivers3. Set up “Model”4. Setup Multicast Server5. Take image of Model – whole disk6. Multicast image to all Targets – whole

disk7. Perform Post imaging tasks8. Create Local Current Image

1. Download Necessary Files

1. Download Necessary Files

ASIRecoveryUpdate.exe http://www.sydneyr.det.nsw.edu.au/ASI/

ASIRecoveryUpdate.exe Recoveryfix.bat

http://www.sydneyr.det.nsw.edu.au/ASI/Recoveryfix.bat

Newsid.exe http://www.sydneyr.det.nsw.edu.au/ASI/

newsid.exe Symantec Ghost

http://software.det.nsw.edu.au/downloads/symantec/Ghost/Ghost.htm

ASIRecoveryUpdate.exe http://www.sydneyr.det.nsw.edu.au/ASI/

ASIRecoveryUpdate.exe Recoveryfix.bat

http://www.sydneyr.det.nsw.edu.au/ASI/Recoveryfix.bat

Newsid.exe http://www.sydneyr.det.nsw.edu.au/ASI/

newsid.exe Symantec Ghost

http://software.det.nsw.edu.au/downloads/symantec/Ghost/Ghost.htm

2. Prepare ASI computers2. Prepare ASI computers

• Run ASIRecoveryUpdate.exe to produce Update floppy.

• Boot with Update floppy on ALL ASI T4L computers.

• Installs network drivers to recovery partition

• Run ASIRecoveryUpdate.exe to produce Update floppy.

• Boot with Update floppy on ALL ASI T4L computers.

• Installs network drivers to recovery partition

3. Set up “Model”3. Set up “Model”

• Commission computer• Create Local admin User – Build• Log in as build• Install all software and configure• Install Novell Client/Zenworks if required• Install all network printers• Login as Local Admin• Copy Build Profile to Default User• Remove any other local user profiles• If you needed to join a domain – remove

computer from domain

• Commission computer• Create Local admin User – Build• Log in as build• Install all software and configure• Install Novell Client/Zenworks if required• Install all network printers• Login as Local Admin• Copy Build Profile to Default User• Remove any other local user profiles• If you needed to join a domain – remove

computer from domain

4. Setup Multicast Server4. Setup Multicast Server

• Install Ghost – Standard tools only

• Use any windows Workstation – not target to model

• Install Ghost – Standard tools only

• Use any windows Workstation – not target to model

5. Take image of Model5. Take image of Model• Start Multicast Session

• Dump from Client• Whole disk

• Set up Model• Boot Model to Rebuild Menu• Restricted Menu – Console• Options – Image/Tape

• Image Boot

• Start Multicast Session• Dump from Client• Whole disk

• Set up Model• Boot Model to Rebuild Menu• Restricted Menu – Console• Options – Image/Tape

• Image Boot

• Join Session• Take image

6. Multicast image to all Targets

6. Multicast image to all Targets

• Prepare Multicast Server• Whole drive

• Boot each target• Rebuild menu• Restricted• Console• Join Session• Change partition sizes to match

original

• Prepare Multicast Server• Whole drive

• Boot each target• Rebuild menu• Restricted• Console• Join Session• Change partition sizes to match

originalSend imageSend image

7. Perform Post imaging tasks

7. Perform Post imaging tasks

• Run NewSID.exe and assign new computer name

• Join Domain if required• Run

C:\DETapps\Support\Source\~scripts\dompassw.reg

• Run Recoveryfix.bat if required• Install Local printers, custom

software• Set default Printer

• Run NewSID.exe and assign new computer name

• Join Domain if required• Run

C:\DETapps\Support\Source\~scripts\dompassw.reg

• Run Recoveryfix.bat if required• Install Local printers, custom

software• Set default Printer

8. Create Local Current Image

8. Create Local Current Image

• Reboot PC and enter Rebuild menu• Restricted• Capture Current image

• Reboot PC and enter Rebuild menu• Restricted• Capture Current image