Post on 06-Mar-2018
For the Electrification of:
●● Overhead Cranes●● Monorails●● Transfer Cars●● Trippers●● Stacker / Reclaimers
Insul-8 Mobile ElectrificationCable Reels ◆ Conductor Bar ◆◆ Festoon ◆ Pendants ◆◆ Drives ◆ Slip Rings
Solutions From A Single Source
Cable FestoonSystems for Power and Control
This catalog showcases a sampling of themost commonly used festoon systems.If you don’t see what you’re looking for,please ask us.
FESTOONING SYSTEMS FROM INSUL-8 MOTIV-8TM
INSUL-8 CRANE ELECTRIFICATION
Typical C-Track Festoon Systems (Power & Control) For Overhead Crane Installation
21
43
5
16
17
1
2
3
4
5
6
7
8
15 14
13
12
6
7 8
9
10
11
Fixed End Junction Box
Terminal Strips (inside junction box)
Cable Connectors
End Clamp
Track Hanger Clamp
Intermediate Trolley
Cross Arm Support
Beam Clamp
Track
Control Box Trolley
Track Joint
Pendant Cable
Pendant Push-Button Station
Tow Arm
Tow Trolley
Flat PVC Cable
End Stop
9
10
11
12
13
14
15
16
17
1 Ph: 402-339-9300/800-521-4888 www.insul-8.com
✱ Insul-8 alsooffers a QuickDisconnectControl BoxTrolley
MOTIV-8TM FESTOONING SYSTEMS FROM INSUL-8
TABLE OF CONTENTS
2
THIS CATALOG PROVIDES A WIDE VARIETY OF FESTOONING SOLUTIONS FOR ELECTRIFYING OVERHEAD CRANES.
Ph: 402-339-9300/800-521-4888 www.insul-8.com
FESTOON SYSTEMS are a clean, economical and efficient method of managing power andcontrol cables for mobile equipment.
FESTOON SYSTEMS are generally used on overhead cranes for the transmission of power andcontrol signals for crossbridge trolley travel, but they can also be applied to crane runway travel. Other applications for festoon systems are transfer cars, monorails, refuse cranes,waste water treatment machines and other material handling applications.
INSUL-8 CORPORATION offers a comprehensive line of festoon products, ranging from simplest of systems running on stretched wire rope to the complex, high speed demands of por-tal and container cranes. Insul-8’s festoon systems run on wire rope, c-track, square bar andI-Beams, with trolleys able to support static loads up to 175 pounds and up to 1,100 poundswith Heavy-Duty festoon systems. Insul-8 festoon systems are designed to support and protectflat and round electrical cables and air or water hoses throughout the travel of the equipment.Our systems can operate in indoor and outdoor environments and can also be designed forharsh, aggressive environments.
ABOUT OUR SYSTEMS
CABLE AND CONNECTORS
STRETCHED WIRE ROPE SYSTEMS LOAD 40 LBS SPEED: 200 FPM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4C-TRACK SYSTEMS
Standard Duty LOAD: 40 LBS SPEED: 250 FPM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6Standard Duty Pre-assembled Festoon Kits LOAD: 40 LBS SPEED: 250 FPM . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21Heavy Duty LOAD LOAD: 80 LBS SPEED: 500 FPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
Flat Cable and Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Insul-8 also offers a full range of round cable and hose to meet your requirements
SQUARE BAR SYSTEMS
Standard Duty LOAD: 45 LBS SPEED: 250 FPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Heavy Duty LOAD: 175 LBS SPEED: 250 FPM
Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Flat Cable Trolleys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Round Cable Trolleys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
I-BEAM SYSTEMSSeries 200 LOAD: 55LBS SPEED: 200 FPM
Series 250 LOAD: 95 LBS SPEED: 250 FPM
Series 300 LOAD: 150 LBS SPEED: 300 FPM
Series 350 LOAD: 175 LBS SPEED: 350 FPM
FESTOON ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19PUSH BUTTON PENDANTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19FESTOON KITS LOAD: 40 LBS SPEED: 250 FPM . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 - 21PRE-ASSEMBLY (LEARN MORE ABOUT IT). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
IF YOU DON’T SEE WHAT YOU’RE LOOKING FOR, PLEASE ASK US.Insul-8 also provides customized systems for unique applications including Heavy Duty Festoon systems.
Flat Cable Trolleys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Flat Cable Trolleys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Flat Cable Trolleys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Round Cable Trolleys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Flat Cable Trolleys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Round Cable Trolleys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . 18
FESTOONING SYSTEMS FROM INSUL-8 MOTIV-8TM
FLAT CABLE AND CONNECTORS
* See Current Correction Factors for Temperatures above 300C (860F)** For Crane and hoist motors in accordance with article 610 of the 1989 National Electric Code for 900C Cables✝ Unshielded cable measurements may vary due to manufacturing tolerances. Contact Insul-8 for shielded cable dimensions.✝✝ All cables from #10 AWG through #16 AWG have rip cords for easy removal of the outer jacket.
Flat CableRequired cable length equals track plus 10% plus length required for end connections
Flat Cable ConnectorsFor Termination of Cable at Power Source or Junction Box.
Construction: Aluminum Body / Rubber Bushing
Heat shrinkable connections for single cable and multiple cable groups, for flat and round cable.
Corrosion Resistant ◆ Flame Retardant Exceeds navy requirements for tightness and integrity when used with
one flat cable or multiple flat cables of the same size
Dim “A”
Cable Part Number Cable Size
YellowPVC
Jacket
23958Y
26550Y
21814Y
26698Y
22542Y
22994Y
21815Y
26005Y
26110Y
22607Y21813Y
23324Y
ShieldedFlat
Cable
31772
31580
31734
Numberof
Conductors
44
4
4
4
4
4
8
8
8
12
124
AWGWireSize
#2
#4#6
#8
#10
#12
#14
#12
#14
#16
#14
#16#16
ContinuousDuty Rating
at 300C (86
0F)
Ambient Amps*
120
90
70
50
40
30
25
21
17
15
17
15
Short Time Rating Amps**
60 Min. 30 Min.
148 173
111 130
83 94
63 6949 52
36 40
31 32
No. ofStrands perConductor
665
420266
168
105
65
41
6541
65
41
65 65
Weight perFoot (lbs)
1.27
.75
.60
.42
.24
.16
.12
.32
.22
.18
.34
.27
.16
Nominal DimensionsUnshielded Cable
(Inches)=
.56” x 1.96”
.49” x 1.70”
.44” x 1.45”
.37” x 1.19”
.27” x .88”
.23” x .71”
.21” x .63”
.23” x 1.34”
.21” x 1.18”
.20” x 1.11”
.21” x 1.90”
.20” x 1.61”.24” x .76”
Control Cables
No ShortTime Rating
No. of Cond
444444888
1212888
Wire Size (AWG)
#4#6#8
#10#12#14#12#14#16#14#16#12#14#16
Cable SizeNPT
2”2”
1.5”1”1”1”
1.5”1.5”1.5”2”2”2”
1.5”1.5”
RefCable #
26550Y21814Y26698Y22542Y
22994Y21815Y26005Y26110Y22607Y21813Y23324Y26005Y26110Y22607Y
CatalogNumber
3583835838B3583735835C35835B3583535837B35837C35837D35838C35838D35838G35837E35837F
No. of Cables
11111111111222
3
No. of Cond
121284848484
8484
Wire Size (AWG)
#14#16
#16#14#14#14#16#10#14#10#16#12#14#12
Cable SizeNPT
2”2”
1.5”
1.5”
1.5”
1.5”
1.5”
1.5”
Ref Cable # 21813Y
23324Y22607Y21815Y26110Y21815Y22607Y22542Y26110Y22542Y
22607Y22994Y26110Y22994Y
CatalogNumber
35838E35838F
35837G
35837K
35837J
35837H
35837L
35837M
No. of Cables
22
11111111
2
2
CatalogNumber
031470314603145
Cable Opening
1.60”1.10”.75”
KnockoutDiameter
2.00”1.37”1.00”
Dimension“A”
6.17’4.5”
4.09”
Weightlbs..40.10.06
Ph: 402-339-9300/800-521-4888 www.insul-8.com
MOTIV-8TM FESTOONING SYSTEMS FROM INSUL-8
STRETCHED WIRE FESTOON KITS
Stretched Wire Rope Festoon Systems are well suited for light duty applications where an intermediate supportstructure is not available. Economical and dependable, stretched wire rope systems provide electrification tosmall cranes, moving hoists and jib cranes.
SW2
SW6
SW2 SW
6SW10
SW8
SW9
SW7
SW1
SW3
SW11
SW12
SW13
SW5
SW15
SW4
SW1
SW3
SW14
2486224863248642486524866
2486724868248692487024871
Max. Span(In Feet)
20406080100
No. ofTrolleysin Kit
3691317
FOR FLAT CABLE:
FOR HOSE & ROUND CABLE:
SW2
SW5
SW4
SW3
SW1
Catalog #
22950
23288
22830
22828
22825
22826
Component
Nylon Coated Wire Rope, 1/4” dia.
Hardware Kit
Tow Bar
Tow Trolley (2 wheel)
Trolley (1 wheel)
Trolley (2 wheel)
SW14
SW15
SW6
Catalog #
22836
22834
22835
Component
Anchor Bracket
Flat Cable Saddle < 3/4” (20mm) wide
Flat Cable Clip
SW2
SW7
SW6
SW3
SW1
Catalog #
22950
23288
22830
22836
22829
Component
Nylon Coated Wire Rope 1/4” Dia.
Hardware Kit
Tow Bar
Anchor Bracket
Tow Trolley (2 wheel)
SW9
SW12
SW11
SW10
SW8
Catalog #
22825
22827
25689
22831
22832
Component
Trolley (1 wheel) *not shown
Trolley (2wheel) shown
Adapter
Cable Clip ( 3/16” to 3/8” )
Cable Clip ( 3/8” to 9/16” )
4Ph: 402-339-9300/800-521-4888 www.insul-8.com
LOAD: 10 LBS (1 WHEEL) MAX. SPEED: 200 FPM MAX.LOAD: 20 LBS (2 WHEEL) MAX. SPEED: 200 FPM MAX.
LOAD: 10 LBS (1 WHEEL) MAX. SPEED: 200 FPM MAX.20 LBS (2 WHEEL) MAX. SPEED: 200 FPM MAX.
Kits include all components listed below:
Kit Part NumberMax. Cable Width
Single Wheel Double Wheel3/4” Max. 1-3/4” Max.
*1 wheel
2487224873248742487524876
2 wheel
2488724888248892489024891
*1 wheel
2487724878248792488024881
2 wheel
2489224893248942489524896
*1 wheel
2488224883248842488524886
2 wheel
2489724898248992490024901
Kit Part NumberCable / Hose O.D.
3/16” - 3/8” Max. 3/8” - 9/16” Max. 9/16” - 3/4” Max.
Max Span(In Feet)
No. ofTrolleysin Kit
20406080100
3691317
SW13
Catalog #
22833
Component
Cable Clip (9/16” to 3/4”)
FESTOONING SYSTEMS FROM INSUL-8 MOTIV-8TM
STANDARD DUTY C-TRACK SYSTEM COMPONENTS
14 Gauge Galvanized Steel ◆◆ Stainless Steel
Catalog Number
GalvanizedSteel
StainlessSteel
WeightPounds Description
14 Gauge C-Track10 ft. Section20 ft. SectionCross Arm Support Bracket:36678 = 12 Gauge 36679 = 14 Gauge
Track Joint AssemblyOne required for each track section per runless one.
Joint clamp for secure attachment and proper align-ment of track sections. Includes four bolts, lock wash-ers and nuts.
Welded Joint Assembly for joining track section.
Track Hanger Clamp AssemblyOne required for each cross arm supportbracket for each track run. 5’ spacing.Designed to be mounted on angle iron brackets with one mounting hole.For mounting track to Cross Arm Support Bracket.Includes all required hardware. (Not Shown) Low profile track hanger assembly for mounting trackto cross arm support. (Not Shown)
End StopOne required for power system, two required for control systems with control trolley.
Beam Clamp for Cross ArmSupportTwo required for each cross arm support bracket.
End ClampOne required for each track run at storageend of track.
2.75” Dia. Steel saddle with clamp and hardware to secure cable.
2” Dia. Plastic saddle with clamp to secure cable.Black anodized aluminum saddle and stainless steel hardware.
.75
.75
.40
.51
.81
.20
.38
.56
.42
.56
2772527724
27726
32059
28741
27727
27728
2220921909
3667836679
21954
31856
2851035707
22005
23381
22264
2195728616
2851135706
28742 .40.40
Anchor ClampOne required per track runDesigned to hold track in place.For use with Cross Arm Support Bracket. Includes all required hardware. (Not Shown)
Standard Duty “C” Track festoon systems are light duty systems suited for cranes and hoists usually with a lighter duty cycle.Available for power or control systems in both straight and curved track configurations. Trolleys available in polypropylenegalvanized steel and aluminum.
5
from 12” to 48” in 6”increments (please specify)
Ph: 402-339-9300/800-521-4888 www.insul-8.com
1020
2lbs/ft1lb/ft
Load: 40 lbs max.Speed: 250 fpm max.
✱
Plastic trolleys, tow trolleys and end clamp suitable for use on galvanized steel systems are noted with “✱ ”
MOTIV-8TM FESTOONING SYSTEMS FROM INSUL-8
STANDARD DUTY C-TRACK SYSTEM COMPONENTS
Catalog NumberGalvanized
SteelStainless
SteelWeightPounds Description
Tow BarOne required for each tow trolley.
For mounting on moving equipment 16” long.
Control Box TrolleyTwo trolleys and one steel saddle mounted onbracket plus fittings to attach control box. (Control box not included.)Same as 22203 except with stainless steel trolleysand stainless steel wheels and hardware.
Junction Boxes and Terminal Strips8” x 10” x 4” steel junction box NEMA 13
8” x 10” x 4” steel junction box for control box trolley. Complete with 12 pole terminal strip.Galvanized Steel Rated at: NEMA 13Stainless Steel Rated at: NEMA 4X
12-pole terminal strip.
Cable Trolley - 5”Load rating 40 lbs max.
5-inch trolley with 4 steel shielded ball bearingwheels, 2.75” Dia. steel saddle and hardware.
Black anodized aluminum body and trolley with stainless steel wheels and hardware.
Cable Trolley - 3”3 inch steel trolley with 4 shielded steel ball bearing wheels, 2.75” Dia. steel saddle and hardware.
3 inch plastic trolley with 4 shielded steel ball bear-ing wheels, 2” Dia plastic saddle. (not shown)
Black anodized aluminum body and saddle with stainless steel wheels and hardware.
1.2
2.75
3.0
9.0
9.0
.20
1.0
.89
.70
.40
.70
32166
28314K
32062
32061
22830
22203B
28315
28314
34876
21941
21991
28615
Tow Trolley Load rating: 40 lb max.
One required for each piece of moving equip-ment to be electrified.
Plated steel trolley with 2.75” Dia. saddle with cut outfor tow bar.
Plastic trolley with 2” Dia. plastic saddle with cut outfor tow bar.Black anodized aluminum tow trolley with 4 stainlesssteel wheels and hardware.
1.12
.70
1.1232060
22168
28614
2366(16 Pin)
2367(24 Pin)
5.28
5.59
Control Unit Trolley with Quick DisconnectLead trolley in control festoon system. Manually pulled with push-button pendant attached to drop cable. Drop cable is then wired into lower half of “quick disconnect”. Flat festoon cable is wired into upper half of “quick disconnect”. Zinc plated steel trolleys and hardware.
Electrical Ratings: 16A Max. 600 Volts AC
6Ph: 402-339-9300/800-521-4888 www.insul-8.com
14 Gauge Galvanized Steel ◆◆ Stainless Steel (Continued)
Load: 40 lbs max.Speed: 250 fpm max.
✱
✱
FESTOONING SYSTEMS FROM INSUL-8 MOTIV-8TM
HEAVY DUTY C-TRACK SYSTEM COMPONENTS
12 Gauge Galvanized Steel ◆◆ Flat Cable Components
Catalog Number WeightPounds Description
12 Gauge C-Track10 ft. Section
20 ft. Section
Track Joint AssemblyOne required for each track section per run less one.Joint clamp for secure attachment and proper alignment of track sections. Includes four bolts, lock washers and nuts.
End StopOne required for Power System, two required for Systems with Control Trolley.
Anchor ClampOne required per track run.Designed to hold track in place.
End Clamp One required for each track run at storageend of track.Aluminum saddle 4” dia. with clamp and hardware to secure cable 5 1/4” wide.
20.040.0
1.08
.45
.20
1.63
2221021805
21806
28513
28508
21932
28512 .45
Track Hanger Clamp AssemblyOne required for each angle iron bracketfor each track run. 10’ spacing.Designed to be mounted on angle ironbrackets with one mounting hole.
Cable Trolley
Trolley load rating 80 lbs max.8” high strength aluminum body with 4” diaaluminum saddle. Trolley bumpers.
3.021802
Heavy Duty “C” Track festoon systems are suited for cranes and hoists usually with a heavier duty cycle.Available for power or control systems in straight configurations. Trolleys available heavy gauge aluminum withaluminum saddle only.
7 Ph: 402-339-9300/800-521-4888 www.insul-8.com
Load: 80 lbs max.Speed: 500 fpm max.
MOTIV-8TM FESTOONING SYSTEMS FROM INSUL-8
HEAVY DUTY C-TRACK SYSTEM COMPONENTS
Catalog Number WeightPounds Description
Tow BarOne required for each tow trolley.For mounting on moving equipment 24” long.
Control Box TrolleyTwo trolleys and one aluminum saddle 4” dia.mounted on bracket plus fittings to attach controlbox.(Junction Box sold separately below.)
Junction Boxes and TerminalStrips8” x 10” x 4” Steel junction box. NEMA 13
8” x 10” x 4” steel junction box for control box trolley. Complete with 12 pole terminal strip.
12-pole terminal strip.
2.63
12.5
9.0
9.0.20
22008
22350
28315
2831434876
Tow Trolley Load rating: 80 lb max.One required for each piece of movingequipment to be electrified.
8” trolley and aluminum saddle 4” dia. with cut outfor tow bar.4.7522169
Trolleys, saddles and all associated parts for round cable and air hose systems are available. Refer to the Installation Operation and Maintenance manual (I.O.M.) and Festoon Price List for details.
I.O.M. Price List
An I.O.M. is included with each order. Price lists may be obtained through your local rep.
8Ph: 402-339-9300/800-521-4888 www.insul-8.com
12 Gauge Galvanized Steel ◆◆ Flat Cable Components
Continued
Load: 80 lbs max.Speed: 500 fpm max.
FESTOONING SYSTEMS FROM INSUL-8 MOTIV-8TM
STANDARD DUTY SQUARE BAR COMPONENTS
Catalog Number
Standard Stainless SteelWeightPounds Description
Track (Square Bar)20 ft. Section, H.R. Steel Track
20 ft. Section, Stainless Steel Track
20 ft. Section, Galvanized Steel Track
Track Joint
Track joint for secure attachment and proper alignment of track sections.
End Stop
Designed to be located between end clamp andintermediate trolley.
End Clamp
One required per system at storage end of track.
28.028.028.0
.25
.75
1.50
24525
3460127843
25681 27845
25596 27847
25595 28548
25598 27846 .50
Track Hanger Designed to be mounted on angle iron bracket. 5’ spacing. Typical, 2’-6” spacing in storage area.
NOTE: Use Drill Fixture for Drilling Holes.Part #: 25728
Cable Trolley
Trolley load rating 45 lbs max.4” long body with 2.75” dia. aluminum saddle
Tow Trolley
Load rating 45 lbs max. One required per system.4” long body with cut out for Tow Bar.
2.5
3.0
25593
25594
28622
28621
Curved Systems and Control Trolleys also available.
9 Ph: 402-339-9300/800-521-4888 www.insul-8.com
Load: 45 lbs max.Speed: 250 fpm max.
Junction Boxes and Terminal Strips8” x 10” x 4” steel junction box NEMA 13.(Terminial Strip not included)8” x 10” x 4” steel junction box for control boxtrolley. (Includes 12 pole terminal strip.)Galvanized Steel Rated at: NEMA 13Stainless Steel Rated at: NEMA 4X12-pole terminal strip.
9.09.0
.20
28314K
28315
28314
34876
MOTIV-8TM FESTOONING SYSTEMS FROM INSUL-8
HEAVY DUTY SQUARE BAR COMPONENTS
Catalog Number
Standard Stainless Steel WeightPounds Description
Track (Heavy Square Bar)20 ft. Section, H.R. Steel Track
20 ft. Section, Stainless Steel Track
20 ft. Section, Galvanized Steel Track
Track Joint
Track joint for secure attachment and proper alignment of track sections.
Drill Fixture
Used for drilling holes at proper position for attachment of hangers, end clamps and end stops.
46.046.046.0
.50
2.0
26.0
24526
3460327663
25683 27664
25670
25726
Special Unit.Available
upon request.
25667 27671 1.50
Track Hanger
Designed to be mounted on angle iron bracket.10’ spacing. Typical 5’ spacing in storage area.
Curved Systems also available.
Curved festoon systems may be required for electrification and/or control of curved monorails and machines that travel in a circular motion. Also, some systems may require more storage space than available.
Additional storage space may be gained by curving the festoon track 900 to the crane rail.
Consult Insul-8 for details on curved systems and other solutions for your festoon application.
25726
Control Box Trolley
Two trolleys and one aluminum saddle 4” dia. mounted on bracket plus fittings to attach controlbox.(Control box not included.)
Junction Boxes and TerminalStrips8” x 10” x 4” steel junction box NEMA 13.(Terminial Strip not included)8” x 10” x 4” steel junction box for control boxtrolley. (Includes 12 pole terminal strip.)Galvanized Steel Rated at: NEMA 13Stainless Steel Rated at: NEMA 4X12-pole terminal strip.
9.0
9.0
.20
28314K
28315
28314
34876
10Ph: 402-339-9300/800-521-4888 www.insul-8.com
Load: 175 lbs max.Speed: 250 fpm max.
FESTOONING SYSTEMS FROM INSUL-8 MOTIV-8TM
HEAVY DUTY SQUARE BAR TROLLEYS FOR FLAT CABLE
Heavy Duty Square Bar Trolleys feature all-steel body construction with aluminum cable saddle. Thetrolleys are suitable for indoor and outdoor applications for flat cable. Standard wheels are steelwith sealed ball bearings.
Catalog Number
Weight in Pounds
Description One Tow Trolley required per system.Supplied with towing box for tow bar.
Standard construction consists of steelbody, aluminum saddle. Maximum loadper trolley is 95 lbs.
One End Clamp required per system.Bolted to Square Bar Track.
13.5 11.5 8.5
See Chart Below See Chart Below See Chart Below
*S1 *S1 *S1
Tow Trolley Cable Trolley End Clamp
Body: Steel-Zinc PlatedSaddle: AluminumWheels: 1.77” O.D.Hardware: Zinc Plated
Cable Pad: Neoprene RubberLoad: 175 lbsW2= Max Cable Window WidthS1= Max Cable Window Height
Specifications & Dimensions
Insul-8 also offers Stainless Steel Trolleys. Please contact the factory if you are interested in these units.
11
Tow Trolley Cable Trolley End Clamp Dimensions (Inches)Catalog #4540045400B4540145401B 4540245402B45406 45406B4540745407B4541045410B
Length11.12511.12512.62512.62515.12515.12512.62512.62515.12515.12515.12515.125
Catalog #4542645426B4542745427B4542845428B4543245432B4543345433B4543645436B
Length8.6258.625
10.12510.12512.62512.62510.12510.12512.62512.62512.62512.625
Catalog #4545345453B4545445454B4545545455B4545945459B4546045460B4546345463B
Length7.3757.3758.8758.875
11.37511.3758.8758.875
11.37511.37511.37511.375
Saddle Dia.444444666688
Width5.25
85.25
85.25
85.25
85.25
85.25
8
W23.96.73.96.73.96.73.96.73.96.73.96.7
*S122
3.53.56622
4.54.522
Ph: 402-339-9300/800-521-4888 www.insul-8.com
Load: 175 lbs max.
Speed: 250 fpm max.
MOTIV-8TM FESTOONING SYSTEMS FROM INSUL-8
HEAVY DUTY SQUARE BAR TROLLEYS FOR ROUND CABLE
Heavy Duty Square Bar Trolleys feature all-steel body construction with aluminum cable saddle. Thetrolleys are suitable for indoor and outdoor applications for round cable. Standard wheels are steel,with sealed ball bearings.
Catalog Number
Weight in Pounds
Description One Tow Trolley required per system.Supplied with towing box for tow bar.
Standard construction consists of steelbody, aluminum saddle. Maximum loadper trolley is 95 lbs.
One End Clamp required per system.Bolted to Square Bar Track.
14.0 12.0 9.0
See Chart Below See Chart Below See Chart Below
*S1 *S1*S1
Tow Trolley Trolley End Clamp
Body: Steel-Zinc PlatedSaddle: AluminumWheels: 1.77” O.D.Hardware: Zinc Plated
Cable Pad: Neoprene RubberLoad: 175 lbsW2= Max Cable Window WidthS1= Max Cable Window Height
Specifications & Dimensions
Insul-8 also offers Stainless Steel Trolleys. Please contact the factory if you are interested in these units.
Tow Trolley Cable Trolley End Clamp Dimensions (Inches)Catalog #4540345403B4540845408B4541145411B
Length11.12511.12512.62512.62515.12515.125
Catalog #4542945429B4543445434B4543745437B
Length8.6258.625
10.12510.12512.62512.625
Catalog #4545645456B4546145461B4546445464B
Length7.3757.3758.8758.875
11.37511.375
Saddle Dia.446688
Width5.25
85.25
85.25
8
W23.96.73.96.73.96.7
*S1.4”.4”.6”.6”.8”.8”
12Ph: 402-339-9300/800-521-4888 www.insul-8.com
Load: 175 lbs max.
Speed: 250 fpm max.
FESTOONING SYSTEMS FROM INSUL-8 MOTIV-8TM
SERIES 200 I BEAM FOR FLAT CABLE
This I-Beam festoon system is ideal for slow speed operation at speeds up to but not exceeding 200fpm with loads of up to 55lbs. The Series 200 “I” Beam System can be strategically used indoorswhere festoon cable systems are required to operate on an “I” Beam. These “I” Beam trolleys aresand cast aluminum with nylon wheels.
Catalog Number
Weight in Pounds
Description One Tow Trolley required per system.Supplied with towing box for tow bar.
Standard construction consists of 5” longbody, 2.75”Dia. x 4” wide saddle.Maximum load per trolley is 55 lbs.
One End Clamp required persystem. Bolted to “I” Beam with(2) 1/4-20 x .25” mounting bolts.
2.75 2.0 .75
24829 24830 24828
Tow Trolley Cable Trolley End Clamp
Body: Sand cast AluminumSaddle: 2.75” Dia. AluminumWheels: NylonCable Pad: Neoprene Rubber
Load: 55 lbs. maxSpeed: 200 fpm. maxMaximum “I” Beam Flange Width: 4.50”
Specifications & Dimensions
13
● Trolleys available for “I” Beam flange width up to 6.25”
● Trolleys with steel wheels available, simply order: 28904 / 2.0 lbs Tow Trolley33530 / 2.75 lbs Cable Trolley 24828 / .75 lbs End Clamp
“I” Beam (customer provided)
Cable Trolley
TowWebbing
FestoonCable
TowTrolleyEnd
Clamp(Fixed)
CablePigtail
forHookup
Ph: 402-339-9300/800-521-4888 www.insul-8.com
Load: 55 lbs max.
Speed: 200 fpm max.
For trolleys without anti-kick rollers simplyadd “B” to the end of the part numer.
NOTE:
MOTIV-8TM FESTOONING SYSTEMS FROM INSUL-8
SERIES 250 I BEAM FOR FLAT CABLE
Series 250 “I” Beam Trolleys feature all-steel body construction with aluminum cable saddles. Thesetrolleys are suitable for indoor and outdoor applications for flat cable. Wheels are available in steelfor standard applications and bronze for spark resistant environments.
Catalog Number
Weight in Pounds
DescriptionOne Tow Trolley required per system.Supplied with towing box for tow bar.Running Gear with Anti-Lift rollersrequired.
Standard construction consists of steelbody, aluminum saddle. Maximum loadper trolley is 95 lbs. Running gear with or without Anti-Lift rollers available.
One End Clamp required per system.Bolted to “I” Beam.
14.5 10.0 8.0
See Chart Below See Chart Below See Chart Below
*S1 *S1 *S1
Tow Trolley Cable Trolley End Clamp
Running Gear: W-BeamsWithout Anti-Lift Rollers: 45197
With Anti-Lift Rollers: 45198
Running Gear: S-BeamsWithout Anti-Lift Rollers: 45187
With Anti-Lift Rollers: 45188
(Consult factory for bronze rollers and other beam sizes!)
Body: Steel-Zinc PlatedSaddle: AluminumWheels: 40mm Steel FlangedAnti-Lift Bearing: 1.38 Dia.
SteelHardware: Zinc PlatedCable Pad: Neoprene RubberLoad: 95 lbsW2= Max Cable Window WidthS1= Max Cable Window Height
Specifications & Dimensions
BeamW4 x 13W5 x 16W5 x 19
CodeA
BC
BeamW6 x 9
W6 x 12W8 x 10
CodeDEK
Beam
S4 x 7.7S4 x 9.5S5 x 10.0
CodeCDE
Beam
S6 x 12.5S6 x 17.25S7 x 15.3
Code
GHJ
Tow Trolley Trolley End Clamp Dimensions (Inches)Catalog #4510045100B4510145101B4510245102B4510645106B4510745107B4511045110B
Length11.12511.12512.62512.62515.12515.12512.62512.62515.12515.12515.12515.125
Catalog #4512645126B4512745127B4512845128B4513245132B4513345133B4513645136B
Length8.6258.625
10.12510.12512.62512.62510.12510.12512.62512.62512.62512.625
Catalog #4515345153B4515445154B4515545155B4515945159B4516045160B4516345163B
Length7.3757.3758.8758.875
11.37511.3758.8758.875
11.37511.37511.37511.375
Saddle Dia.444444666688
Width5.25
85.25
85.25
85.25
85.25
85.25
8
W23.96.73.96.73.96.73.96.73.96.73.96.7
*S122
3.53.56622
4.54.522
14Ph: 402-339-9300/800-521-4888 www.insul-8.com
Load: 95 lbs max.
Speed: 250 fpm max.
✱
✱
FESTOONING SYSTEMS FROM INSUL-8 MOTIV-8TM
SERIES 250 I BEAM FOR ROUND CABLE
Series 250 “I” Beam Trolleys feature all-steel body construction with aluminum cable saddles. Thesetrolleys are suitable for indoor and outdoor applications for round cable. Wheels are available insteel for standard applications and bronze for spark resistant environments.
Catalog Number
Weight in Pounds
DescriptionOne Tow Trolley required per system.Supplied with towing box for tow bar.Running Gear with Anti-Lift rollersrequired.
Standard construction consists of steelbody, aluminum saddle. Maximum loadper trolley is 95 lbs. Running gear with or without Anti-Lift rollers available.
One End Clamp required per system.Bolted to “I” Beam.
15.0 10.5 8.5
See Chart Below See Chart Below See Chart Below
S1 S1 S1
Tow Trolley Cable Trolley End Clamp
Running Gear: W-BeamsWithout Anti-Lift Rollers: 45197
With Anti-Lift Rollers: 45198
Running Gear: S-BeamsWithout Anti-Lift Rollers: 45187
With Anti-Lift Rollers: 45188
(Consult factory for bronze rollers and other beam sizes!)
Body: Steel-Zinc PlatedSaddle: AluminumWheels: 40mm Steel FlangedAnti-Lift Bearing: 1.38 Dia.
SteelHardware: Zinc PlatedCable Pad: Neoprene RubberLoad: 95 lbsW2= Max Cable Window WidthS1= Max Cable Window Height
Specifications & Dimensions
BeamW4 x 13W5 x 16W5 x 19
CodeA
BC
BeamW6 x 9
W6 x 12W8 x 10
CodeDEK
Beam
S4 x 7.7S4 x 9.5S5 x 10.0
Code
CDE
Beam
S6 x 12.5S6 x 17.25S7 x 15.3
Code
GHJ
Tow Trolley Cable Trolley End Clamp Dimensions (Inches)Catalog #4510345103B4510845108B4511145111B
Length11.12511.12512.62512.62515.12515.125
Catalog #4512945129B4513445134B4513745137B
Length8.6258.625
10.12510.12512.62512.625
Catalog #4515645156B4516145161B4516445164B
Length7.3757.3758.8758.875
11.37511.375
Saddle Dia.446688
Width5.25
85.25
85.25
8
W23.96.73.96.73.96.7
S1.4.4.6.6.8.8
15 Ph: 402-339-9300/800-521-4888 www.insul-8.com
Load: 95 lbs max.
Speed: 250 fpm max.
✱
✱
MOTIV-8TM FESTOONING SYSTEMS FROM INSUL-8
SERIES 300 I BEAM FOR FLAT CABLE
The economical Series 300 “I” Beam Trolleys for flat cable are designed to run on S3 x 5.7#, S3 x7.5# or S4 x 7.7# “I” beams only. The saddle is suspended from the trolley by a pivot mechanismwhich allows the cable package to sway during crane operation providing smoother operation. Lead trolleys are supplied with anti-lift rollers as standard.
Catalog Number WeightPounds Description
Tow TrolleyOne required per system. Complete with Anti-LiftRollers positioned as Lead Trolley in system isequipped with cut out box for engagement of towbar from mobile consumer.
Length= 8.00”
Cable TrolleyStandard construction consists of steel body, steelsaddle. Maximum load per trolley is 150 lbs.
Length= 5.50”
End ClampOne End Clamp required per system. Positioned atend of system and clamped to “I” Beam.
Length= 7.77”
Control Box TrolleyTwo trolleys and one steel saddle mounted on bracket plus fittings to attach control boxJunction Box sold separately (See Page 10.)
Length = 26.25”
Single Control TrolleySingle trolley suitable for mounting junction box.
Length = 5.5”
9.0
5.0
5.0
13.0
5.0
34366
34364
34365
34925
34407
Body: Low Carbon SteelSaddle: Low Carbon SteelFinish: Zinc Plated w/yellow Dichromate SealHardware: Zinc Plated
Rollers:● Main - 1.68” Dia. Hardened Steel● Anti-Lift - 1.19” Dia. Hardened Steel.
Saddle Diameter: 3.4”Cable Window: 2.38” wide x 1.00” high
Specifications
16Ph: 402-339-9300/800-521-4888 www.insul-8.com
Load: 150 lbs max.Speed: 300 fpm max.
FESTOONING SYSTEMS FROM INSUL-8 MOTIV-8TM
SERIES 350 I BEAM FOR FLAT CABLE
Series 350 “I” Beam Systems are designed for flat cable in a wide range of applications such as steel mills and aluminumsmelters. These trolleys are built to meet the demanding requirements of large cranes and moving machinery. The trolleysare provided with side guide and anti-lift rollers to withstand the most demanding applications. The trolleys are suitable forindoor and outdoor applications for flat cable. Wheels are available in steel for standard applications.
Catalog Number
Weight in Pounds
DescriptionOne Tow Trolley required per system.Supplied with towing box for tow bar.Running Gear with Anti-Lift rollersrequired.
Standard construction consists of steelbody, aluminum saddle. Maximum loadper trolley is 175 lbs. Running gear withor without Anti-Lift rollers available.
One End Clamp required per system.Bolted to “I” Beam.
16.5 12.0 10.0
See Chart Below See Chart Below See Chart Below
*S1 *S1 *S1
Tow Trolley Cable Trolley End Clamp
Running Gear: W-BeamsWithout Anti-Lift Rollers: 45195
With Anti-Lift Rollers: 45196
Running Gear: S-BeamsWithout Anti-Lift Rollers: 45185
With Anti-Lift Rollers: 45186
Need another beam size? Call us.
Body: Steel-Zinc PlatedSaddle: AluminumWheels: 2” Dia. Crowned SteelAnti-Lift Bearing: 1.38 Dia.
SteelHardware: Zinc PlatedCable Pad: Neoprene RubberLoad: 175 lbs Max.W2= Max Cable Window WidthS1= Max Cable Window Height
Specifications & Dimensions
BeamW4 x 13W5 x 16W5 x 19
CodeABC
BeamW6 x 9
W6 x 12W8 x 10
CodeDEK
Beam
S4 x 7.7S4 x 9.5S5 x 10.0
Code
CDE
Beam
S6 x 12.5S6 x 17.25S7 x 15.3
CodeGHJ
Tow Trolley Trolley End Clamp Dimensions (Inches)Catalog #4510045100B4510145101B4510245102B4510645106B4510745107B4511045110B
Length11.12511.12512.62512.62515.12515.12512.62512.62515.12515.12515.12515.125
Catalog #4512645126B4512745127B4512845128B4513245132B4513345133B4513645136B
Length8.6258.625
10.12510.12512.62512.62510.12510.12512.62512.62512.62512.625
Catalog #4515345153B4515445154B4515545155B4515945159B4516045160B4516345163B
Length7.3757.3758.8758.875
11.37511.3758.8758.875
11.37511.37511.37511.375
Saddle Dia.444444666688
Width5.25
85.25
85.25
85.25
85.25
85.25
8
W23.96.73.96.73.96.73.96.73.96.73.96.7
*S122
3.53.56622
4.54.522
17 Ph: 402-339-9300/800-521-4888 www.insul-8.com
Load: 175 lbs max.
Speed: 350 fpm max.
MOTIV-8TM
FESTOONING SYSTEMS FROM INSUL-8
SERIES 350 I BEAM FOR ROUND CABLE
Series 350 “I” Beam Systems are designed for round cable in a wide range of applications such as steel mills and aluminum smelters. These trolleys are built to meet the demanding requirements of large cranes and moving machinery.These trolleys are provided with side guide and anti-lift rollers to withstand the most demanding applications. Trolleys aresuitable for indoor and outdoor applications for round cable. Wheels are available in steel for standard applications.
Catalog Number
Weight in Pounds
DescriptionOne Tow Trolley required per system.Supplied with towing box for tow bar.Running Gear with Anti-Lift rollersrequired.
Standard construction consists of steelbody, aluminum saddle. Maximum loadper trolley is 175 lbs. Running gear withor without Anti-Lift rollers available.
One End Clamp required per system.Bolted to “I” Beam.
17.0 13.0 11.0
See Chart Below See Chart Below See Chart Below
*S1 *S1 *S1
Tow Trolley Cable Trolley End Clamp
Running Gear: W-BeamsWithout Anti-Lift Rollers: 45195
With Anti-Lift Rollers: 45196
Running Gear: S-BeamsWithout Anti-Lift Rollers: 45185
With Anti-Lift Rollers: 45186
(Consult factory for other beam sizes!)
Body: Steel-Zinc PlatedSaddle: AluminumWheels: 2” Dia. (40mm) Steel FlangedAnti-Lift Bearing: 1.38 Dia.
SteelHardware: Zinc PlatedCable Pad: Neoprene RubberLoad: 175 lbsW2= Max Cable Window WidthS1= Max Cable Window Height
Specifications & Dimensions
BeamW4 x 13W5 x 16W5 x 19
CodeABC
BeamW6 x 9
W6 x 12W8 x 10
CodeDEK
Beam
S4 x 7.7S4 x 9.5S5 x 10.0
Code
CDE
Beam
S6 x 12.5S6 x 17.25S7 x 15.3
CodeGHJ
Tow Trolley Cable Trolley End Clamp Dimensions (Inches)Catalog #4510345103B4510845108B4511145111B
Length11.12511.12512.62512.62515.12515.125
Catalog #4512945129B4513445134B4513745137B
Length8.6258.625
10.12510.12512.62512.625
Catalog #4515645156B4516145161B4516445164B
Length7.3757.3758.8758.875
11.375.11.375
Saddle Dia.446688
Width5.25
85.25
85.25
8
W23.96.73.96.73.96.7
*S1.4.4.6.6.8.8
18Ph: 402-339-9300/800-521-4888 www.insul-8.com
Load: 175 lbs max.
Speed: 350 fpm max.
FESTOONING SYSTEMS FROM INSUL-8 MOTIV-8TM
FESTOON ACCESSORIES
CatalogNumber Length Nominal
Weight (lbs) Description
Tow CableOptional item used in both High Speed and Outdoorapplications.
Designed for use on:● Heavy Duty C-Track● Heavy Duty Square Bar ● 250 Series “I” Beam● 350 Series “I” Beam
Tow WebbingOptional item used in both High Speed and Outdoorapplications ideal for systems in spark resistant envi-ronments. Ordered by the foot.
Designed for use on:● Standard Duty C-Track● Standard Duty Square Bar ● 200 Series “I” Beam ● 300 Series “I” Beam
Flat Cable OrganizerOptional item for systems in order to prevent flatcables within the loops from becoming tangled orcaught during operation.
Designed for use on:● 200 Series “I” Beam● 250 Series “I” Beam● 300 Series “I” Beam● 350 Series “I” Beam● Can also be used on other festoon systems
depending upon application.
Round Cable OrganizerOptional item for systems in order to prevent roundcables within loops from becoming tangled or caughtduring operation. Either one or two per loop may berequired.
Designed for use on:● 200 Series “I” Beam● 250 Series “I” Beam● 300 Series “I” Beam● 350 Series “I” Beam● Can also be used on other festoon systems
depending upon application.
.28
.40
.51
.63
.74
.85
.18 lbs/ft
2469024690B24690C24690D24690E24690F
03159
4’-6’6’-8’8’-10’10’-12’12’-14’14’-16’
AsRequired
TW
WH1
H2
CatalogNumber40619J40619K
H1&H24.5”4.5”
W5.1”6.7”
TW7.8”
10.6”
Dimensions: Inches
L1
W
D
L2 CatalogNumber
40600P40600Q
“D” CableDia. RangeUp to .80Up to .80
L16.0”8.8”
L23.9”6.7”
Wt(lbs.)
.751.1
19 Ph: 402-339-9300/800-521-4888 www.insul-8.com
Push button pendants are used in conjunction with conductor bar, festoon systems orreels as a “point of control” stations for overhead cranes, hoists and conveyors. Insul-8 offers a complete line of push button pendants.
Please consult Insul-8, your local rep or request catalog: PEN001 for further information.
INSUL-8 offers a complete selection of accessories for your festoon system, including a variety of push-button pendants to maximize the value of your system.
MOTIV-8TM FESTOONING SYSTEMS FROM INSUL-8
C-TRACK FESTOON KITS
20
FOR POWER SYSTEMS
Fixed EndPigtail
Trolley
Track
EndStop
FlatCable
EndClamp
HangerClamp
FIXED END
PIGTAIL
LoopDepth
20’3667118.381.3538
30’36671B
27.841.8945
40’36671C
37.312.4370
50’36671D
46.772.9777
60’36671E
56.53.24102
Crane SpanSystem Part NumberActive Travel (feet)Storage Distance (feet)Weight (lbs)
14 & 16 AWG - 12 Conductor Systems (#14-4C, #16-8C)
Pre-configured, standard duty C-Track festoon system kits provide a simple method for order-ing complete crossbridge power systems for crane applications. If you need a kit with other cable combinationsand trolley styles, just ask us. Kits can also be ordered pre-assembled by simply adding the letter “P” to the endof the system part number. See page 22. Example: 36670E = 60’ power system
36670EP = 60’ pre-assembled power system
20’3667018.381.3538
30’36670B
27.841.8945
40’36670C
37.312.4370
50’36670D
46.772.9777
60’36670E
56.53.24102
Crane SpanSystem Part NumberActive Travel (feet)Storage Distance (feet)Weight (lbs)
14 & 16 AWG - 12 Conductor Systems (#14-4C, #16-8C)
Ph: 402-339-9300/800-521-4888 www.insul-8.com
KITS INCLUDE THE FOLLOWING: c-track, splices, hangers, anchor hangers, trolleys, tow trolley, end clamp,end stop, flat cable and connectors. Systems are calculated based on a 3 ft loop depth. Cable lengthsupplied includes 10 additional feet of termination purposes. Hanger supports are based on five footcenters.
C-Track festoon kit using plastic trolley #28615
C-Track festoon kit using steel trolley #21991
FESTOONING SYSTEMS FROM INSUL-8 MOTIV-8TM
C-TRACK FESTOON KITS
21
FOR CONTROL SYSTEMS
12.01Trolley
PendantTrolley
DripLoop
Track
EndStop
FlatCable
EndClamp
Fixed EndPigtail
LoopDepth
20’3667317.082.7943
30’36673B
26.813.0660
40’36673C
36.273.6076
50’36673D
45.734.1493
60’36673E55.194.68109
Crane SpanSystem Part NumberActive Travel (feet)Storage Distance (feet)Weight (lbs)
16 AWG - 16 Conductor Systems (2x#16-8C)
Pre-configured standard duty C-Track festoon system kits provide a simple method for order-ing complete crossbridge control systems for crane applications. If you need a kitwith other cable combina-tions and trolley styles, just ask us. Push-button pendant and drop cable are to be ordered separately. Kits canalso be ordered pre-assembled, by simply adding the letter “P” to the end of the system part number. Seepage 22. Example: 36672 = 20’ control system
36672P = 20’ preassembled control system
Crane SpanSystem Part NumberActive Travel (feet)Storage Distance (feet)Weight (lbs)
16 AWG - 16 Conductor Systems (2x#16-8C)
20’3667217.082.7943
30’36672B
26.813.0660
40’36672C
36.273.6076
50’36672D
45.734.1493
60’36672E55.194.68109
Ph: 402-339-9300/800-521-4888 www.insul-8.com
KITS INCLUDE THE FOLLOWING: c-track, splices, hangers, anchor hangers, trolleys, 16 pin control trolleywith quick disconnect, end clamp, end stops, flat cable and connectors. Systems are calculated basedon a 3 ft loop depth. Cable length supplied includes 5 additional feet of termination purposes. Hangersupports are based on five foot centers.
C-track festoon kit using plastic trolley #28615
C-track festoon kit using steel trolley #21991
MOTIV-8TM FESTOONING SYSTEMS FROM INSUL-8
FESTOON PRE-ASSEMBLY
22
WHY SHOULD YOU CONSIDER HAVING YOUR
NEXT FESTOON SYSTEM ARRIVE PRE-ASSEMBLED?
Insul-8 offers complete pre-assembled festoon systems. Systems are carefully assembled by experienced personnel working under ideal conditions.Pre-assembly reduces potential field problems Reduces installation time and related expenses. Systems are assembled and shipped on a steel shipping frame or in a cardboard container designed for safe and easy transfer to the main system track.
Please contact Insul-8 for more details.
Above: Typical control system shipped in box.Note that control trolley is also pre-wired whichreduces installation time.
Right: Typical power system shipped on steel frame.
Ph: 402-339-9300/800-521-4888 www.insul-8.com
Solutions from a Single Source
CANADA175 Boulevard J.F. Kennedy
St. Jerome, Quebec J7Y 4B5
Phone: (450) 565-9900Toll Free: (800) 667-2487
Fax: (450) 432-6985e-mail: contact@insul-8.com
USA10102 F Street
Omaha, NE 68127
Phone: (402) 339-9300Toll Free: (800) 521-4888
Fax: (402) 339-9627e-mail: i8-info@insul-8.com
AUSTRALIA:14 England StreetDandenong, Victoria 3175
Phone: (3) 9706 88 44Fax: (3) 794 92 98e-mail: insul8@peninsula.starway.net.au
Distributed By:
SPRING DRIVENREELS
SLIP RINGS PENDANTS
CONDUCTOR BAR
CONDUCTOR BAR
DRIVES
Please visit our websites at:www.insul-8.com
www.drivecon.com
ISO 9001 Certified
CF003 01/02MN