Post on 25-Jun-2020
Penlon Suction and Oxygen Therapy RangeS U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S
Features and Benefits
Single and twin flowmeters available in oxygen or air configurations
Replacement plastic nipples available
Twin, Single and Low Flow Flowmeters
Features Benefits
0 – 15 L/min standard flow rate, Single flowmeter has Low flow, 0 – 3.5 and 0 – 5 L/min options
An array of flow options for most clinical requirements
Pressure compensation Prevents back pressure build up on flow indicator
Incorporates static charge dissipation device Ensure accurate readings
BS EN 737 probe, ⅛” NPT Universal thread or ⅜” BSP connector
Flowmeter accept a wide range of accessories
Polycarbonate flow tube and coverDurable, quality materials
Anodised aluminium body and control
Twin graduated scale Provides precision low flow control
Mounting options including DIN, DISS and AFNORMarket compatibility; extensive mounting options and pipeline connection types available
Technical Specification Standard Low Flow
Accuracy±0.5 L/min, or scale value ±10% (whichever is greater) ±0.15 L/min
Flow rate 15 L/min calibrated, >40 L/min max 40 L/min maximum
Scale increments0.5, 1.0, 1.5, from 2 to 10 in 1 L/min increments, 12 and 15 L/min
0 - 3.5 L/min: 0.125 L/min (0.125 to 1 L/min) 0.25 L/min (1 to 3 L/min)
0 - 5 L/min: 0.25 l/min
ConstructionPoly-acetal, polycarbonate flow tube and cover Polycarbonate housing
Inlet pressure 60 psi 60 psi
Dimensions (H x W) 235 x 80 mm without probe 155 x 70 mm
Weight 200 g 221 g
S U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S
Features and Benefits
2 Suction and Oxygen Therapy Range
Penlon Suction and Oxygen Therapy Range
Low Flow Oxygen Flowmeter
Description Part Number
0 - 5 L/min, tubing nipple and BS EN 737 MK 4 probe
9910-183
0 - 5 L/min, tubing nipple and ⅜” BSP connector
9910-184
0 - 3.5 L/min, tubing nipple and BS EN 737 MK 4 probe
9910-116
0 - 3.5 L/min with tubing nipple and ⅜” BSP connector
9910-118
Twin Flowmeter 0-15 L/min
Description Gas Part Number
Tubing nipples and BS EN 737 MK 4 probe
Oxygen 9910-034Air 9910-032
Tubing nipples and ⅛” NPT universal thread
Oxygen 9910-217Air 9910-219
Tubing nipples and ⅜” BSP connector
Oxygen 9910-050Air 9910-051
Single Flowmeter 0-15 L/min
Description Gas Part Number
Tubing nipple and BS EN 737 MK 4 probe
Oxygen 9910-029Air 9910-030
Tubing nipple and ⅜” BSP connector
Oxygen 9910-020Air 9910-021
9⁄16” UNF fitting and BS EN 737 MK 4 probe
Oxygen 9910-176Air 9910-193
9⁄16” UNF fitting and ⅛” NPT universal thread
Oxygen 9910-233Air 9910-234
9⁄16” UNF fitting and ⅜” BSP connector
Oxygen 9910-177Air 9910-201
Tubing nipple and ⅛” NPT universal thread
Oxygen 9910-216Air 9910-218
Twin flowmeter with tubing nipples
Single low flow flowmeter with BSP Connector
Single flowmeter with tubing nipple and MK 4 probe
Suction and Oxygen Therapy Range 3
S U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S
Features and BenefitsPenlon Suction and Oxygen Therapy Range
Therapy Flowmeter Mounting Options
Features Benefits
Twin back bar only available with ⅜” BSP or ⅛” NPT Universal thread
Ability to mount multiple therapy sets using a single pipeline connector
Remote kit with ‘V’ plate for single or twin flowmeters, 2 m hose, available for oxygen and air (4 bar)
Facilitates mounting on crash carts or rail systems remote of central supply using the ‘V’ mount system
Remote kit with 44 mm rail clamp for single or twin flowmeters, 2 m hose, available for oxygen and air (4 bar)
Facilitates mounting on crash carts or rail systems remote of central supply using the medical rail system
A range of mounting options for Penlon’s Therapy Range
Description Gas Part Number
Twin back bar
⅜” BSP 4840-111
⅛”NPT universal thread 4840-132
Remote kit with 44mm rail clamp for single or twin flowmeter, 2 m hose
Oxygen 4310-196
Air (4 bar) 4310-201
4840-111
4310-201
S U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S
Features and Benefits
4 Suction and Oxygen Therapy Range
Penlon Suction and Oxygen Therapy Range
Description Gas Part Number
Universal tubing nipple ½” BSF male thread Pack of 10
Oxygen and Air 2890-014
Universal tubing nipple 9⁄16” UNF female thread Pack of 10
Oxygen 3833-097
Air 3833-120
Description Part Number
Bubble humidifier with occlusion protection (O.P.)
9410-006
Bubble humidifier (Standard) 9410-007
Adaptor for US fitting Pack of 10 2890-018
Technical Specifications Bubble Humidifier with O.P Bubble Humidifier (Standard)
Usable capacity 180 ml (between lines) 220 ml (between lines)
Safety valve 3 - 4 psi N/A
Inlet fitting 9⁄16” UNF union nut/bullnose ½” BSF male
Dimensions (H x W) 195 x 60 mm 140 x 84 mm
Weight 210 g 200 g
Penlon Bubble Humidifier
Features Benefits
Fully compatible with the Penlon flowmeter range Therapy options from a world class manufacturer
Reusable Cost effective alternative to disposable humidifiers
A choice of standard format or occlusion protection models
For use with Penlon therapy flowmeters
For the humidification of inspired gases
Note: order adaptor separately
9410-007
2890-014
3833-097
9410-006
Suction and Oxygen Therapy Range 5
S U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S
Features and BenefitsPenlon Suction and Oxygen Therapy Range
A comprehensive range of regulators for medical gas therapy applications
High quality
Gas driven resuscitation/life support systems
Medical Gas Regulators
Features Benefits
Therapy regulator with Bullnose or Pin-index inlet, and ⅜” BSP or Schrader outlet An array of inlets and flow setting options to support
most connectors and clinical requirementsSelectable regulator with Bullnose or Pin-index inlet, ⅜” BSP or Schrader outlet, and flow settings
Easy to use, quiet operation Creating comfortable clinical environments
High quality, precision components Provide accurate variable output flows
Selectable Flow Regulators
Description Part Number
Pin-index, O2, regulator with hose nipple outlet
321032
Bullnose O2, regulator with hose nipple outlet
321033
Pin-indexed O2 regulator with quick release (Schrader-type) pressure and hose nipple outlets
321034
Bullnose, O2 regulator with quick release (Schrader-type) pressure and hose nipple outlets
321035
321032 321033
321034 321035
Therapy Regulators
Description Part Number
Bullnose Air Regulator with side-mounted gauge and 3⁄8”outlet
321045
Bullnose, O2 regulator with 3⁄8” BSP outlet
321040
Bullnose, O2 regulator with quick release (Schrader-type) pressure outlet
321041
Pin-index, O2, regulator with 3⁄8” BSP outlet
321038
Pin-index, O2, regulator (Schrader-type)
321039321038 321039
321041
321045 321040
S U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S
Features and Benefits
6 Suction and Oxygen Therapy Range
Penlon Suction and Oxygen Therapy Range
Penlon SC760 Suction Controller
Features Benefits
0 – 20 kPa low suction range Ideal for continuous drainage application
0 – 86 kPa high suction range Ideal for tracheal and bronchial application
Colour coded high or low suction models Differentiation for additional safety
Supplied with BactiTrap® anti-bacterial filterHigh performance filter offering central pipeline protection
Direct or remote connector options Multiple off the wall mounting options
Vacuum adjustment and separate on/off switch Simple dual control for maximum performance
MRI Compatible* Can be used in all clinical environments
Twin unit available (high suction only) Dual suction from a single source
Lightweight plastic design Colour coded body for additional safety - Yellow body: high suction - Blue body: low suction
Excellent performance
Uncompromising safety User-friendly gauge design, marked for high, medium or low usage
Multiple connector and mounting options
*MRI compatibility relates to the SC760 MRI controller kit – high suction, forward facing mounting with 2 or 4 m hose (5006846 or 5007495). This product is certified as MRI safe for use with 1.5 and 3 tesla scanners, up to the 1000 gauss line.
Description Suction Type Part Number
SC760 Direct connection BS5682 Probe
High suction unit 310101
Low suction unit 310102
SC760 Remote, with ‘V’ plate
High suction unit 310103
Low suction unit 310104
SC760 Remote with 44 mm rail clamp
High suction unit 310105
Low suction unit 310106
SC760 with ⅛” NPT Universal thread
High suction unit 310107
Twin Direct SC760 High suction unit 310109
SC760 MRI controller kit – forward facing with 2 m hose
High suction unit 5006846
SC760 MRI controller kit – forward facing with 4 m hose
High suction unit 5007495Low Suction Unit
High Suction Unit
Suction and Oxygen Therapy Range 7
S U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S
Features and BenefitsPenlon Suction and Oxygen Therapy Range
Technical Specifications High Suction Controller Low Suction Controller
Performance 0 - 750 mmHg 0 - 150 mmHg
Controls• On / Off switch • 270° vacuum control knob
• On / Off switch • 270° vacuum control knob
Gauge accuracy ±2% ±2%
Filter BactiTrap® BactiTrap®
Safety Positive pressure restrictor Over vacuum safety relief valve set at 150 mmHg
Dimensions (H x W x D) 275 x 105 x 100 mm 275 x 105 x 100 mm
Dimensions with probe (H x W x D)
275 x 105 x 160 mm 275 x 105 x 160 mm
Weight 540 g 620 g
Compliance International standard ISO 10079-3
Penlon East Suction Controller
Features Benefits
0 – 20 kPa low suction rangeUser specific ranges
0 – 86 kPa high suction range
Lightweight construction Colour coding for additional safety
Supplied with BactiTrap® anti-bacterial filterHigh performance filter offering central pipeline protection
Direct or remote connector options Multiple off the wall mounting options
Vacuum adjustment and separate on/off switch Simple dual control for maximum performance
Twin unit available (high suction only) Multiple suction from a single source
Ideal for general hospital aspiration procedures
Direct action diaphragm A choice of direct or remote connector probes
S U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S
Features and Benefits
8 Suction and Oxygen Therapy Range
Penlon Suction and Oxygen Therapy Range
Description Suction Type Part Number
Suction controller BS EN 737 direct probe
High suction unit 9510-025
Low suction unit 9510-029
Suction controller BS EN 737 remote probe, with ‘V’ bracket
High suction unit 9510-026
Low suction unit 9510-030
Suction controller BS EN 737 remote probe, with 44 mm universal rail clamp
High suction unit 9510-035
Low suction unit 9510-036
Suction controller ⅛” NPT universal thread
High suction unit 9510-105
Low suction unit 9510-106
9510-025
9510-030
Suction and Oxygen Therapy Range 9
S U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S
Features and BenefitsPenlon Suction and Oxygen Therapy Range
Penlon Intermittent Suction Controller
Features Benefits
Single action, instant switch between continuous and intermittent suction modes
Easy to use, high performance suction unitEasy adjustment of vacuum level with large control and progressive action
Separate on/off switch Simple dual control for maximum performance
Supplied with BactiTrap® anti-bacterial filter High performance filter
Automatic vacuum relief Hassle free vacuum release
Range of cycling times for ‘Suction On’ and ‘Suction Off’ in intermittent mode
Versatile suction options
Ability to switch to intermittent operation Suitable for all general hospital aspiration procedures
Suction Controller with intermittent and continuous modes
7 – 40 kPa vacuum range
Technical Specifications
Pressure gauge Diameter 63 mm
Gauge accuracy ±2%
Controls On/Off lever with automatic vacuum relief
Safety Positive pressure restrictor
Filter BactiTrap®
Compliance International standard: ISO 10079-3
Minimum controllable vacuum 7 kPa / 50 mmHg
Maximum vacuum 40 kPa / 300 mmHg
Flow rateContinuous mode: 35 L/min (minimum)
Intermittent mode: 10 L/min (approximately)
Intermittent timing (factory default)
16 seconds On
8 seconds Off (approximately)
Dimensions (H x W x D) 275 x 105 x 125 mm
Dimensions with probe (H x W x D)
275 x 105 x 195 mm
Weight 950 g
S U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S
Features and Benefits
10 Suction and Oxygen Therapy Range
Penlon Suction and Oxygen Therapy Range
Description Part Number
High Vacuum, intermittent controller with ⅛” NPT universal thread, and BactiTrap® filter
310165
Connector and Tubing 1 m 4160-001
Connector and Tubing 2 m 4160-002
Tapered connector 3833-077
Suction and Oxygen Therapy Range 11
S U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S
Features and BenefitsPenlon Suction and Oxygen Therapy Range
Technical Specification
Height 80 mm
Diameter 67 mm
Flowrate 55 L/min
Pressure drop 80 mmHg
Filter efficiencyIn excess of 99.9% when challenged with Staphylococcus aureus (0.8 - 1.0 µ)
Positive mechanical shut of Actuating volume 15 ml
UK patent no 2272379B
Description Part Number
Bacterial filter and over-flow protection
4830-014
Box of 48 9970-001
BactiTrap® Anti-bacterial Filter
Features Benefits
Prevents overflow from suction device into Pipeline System
High performance filter; easy to use and simple filtration unit, to protect suction devices and pipeline system
Controls spread of bacteria and viruses
Prolongs life of suction device
Visual indication of contamination, and suction cut-off gives instant hazard warning of aspirated material overflow
Available in a box of 48
High Performance anti-contaminate unit for your Vacuum Pipeline System
Combining filtration of airborne and droplet-borne bacteria
Protection from aspirated material overflow
S U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S
Features and Benefits
12 Suction and Oxygen Therapy Range
Penlon Suction and Oxygen Therapy Range
Penlon AV500 Injector Suction Unit
Features Benefits
Medical Air driven and quiet operation Minimal noise disturbance in critical environments
Autoclavable polycarbonate safety jar with overflow protection device
Cost effective, high quality suction unit, with reusable jarChrome plated body with needle valve system
Provides the maximum vacuum with the minimum usage of gas
500 and 2000 ml jar options Options to suit multiple clinical requirements
Needle valve system Accurate vacuum adjustment
Vacuum gauge as standard
High specification, with collection jar and mounting options
Fitted with air inlet probe
Compatible with Penlon cylinder regulators
Rail mounted options available
The AV500 is a compact and reliable injector suction unit
Ideal for mounting on an emergency trolley or bed
Description Part Number
Rail mounted injector suction unit with MAK 500 jar
5000915
Injector suction, unit only with MAK 500 jar
312040
Technical Specification
Dimensions (H x W x D) 200 x 125 x 80 mm
Classification High suction injector
PerformanceVacuum 450 mmHg
Suction flowrate 25 L/min
Power sourceHigh pressure air, piped or bottled. Driving gas consumption 20% above input flow
Pressure gauge 63 mm diameter, calibrated 0 - 760 mmHg
Construction Aluminium anodised body, Polycarbonate filter bowl
Sterilization 120°C
For details of our full range of accessories contact our Sales Office
Suction and Oxygen Therapy Range 13
S U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S
Features and BenefitsPenlon Suction and Oxygen Therapy Range
Electrical Suction Units
Features Benefits
Filter and overflow protection device on all models Protection for pumps
SP70 mobile unit with braked castors for theatre use; high flow-rate (up to 60 L/min) and two 2-litre receiver jars
Mobile with high capacity jar
SP30 for wards and clinics with 25 L/min flow rate and a 2-litre receiver jar
Compact unit with high capacity jar
SP20 Plus for emergency services, wards and clinics with mains/battery operation, 15 L/min flow rate and a 2-litre receiver jar
Versatile, portable, multi-purpose, with high capacity jars
V7 Portable Electric Suction Units emergency services, wards and clinics with mains/battery operation, 30 L/min flow rate, and a 1-litre receiver jar. Fittings are compatible with other popular canister and disposable liner systems
Portable, with medium range flow rate
Wide range of high quality, quiet, electric suction units
For theatre, wards, clinics and emergency applications
SP70 Electrical Suction Pump
Technical Specification
Power supply 220 - 240 V AC, 50 - 60 Hz
Maximum vacuum -90 kPa (-675 mmHg)
Dimensions (H x W x D) 850 x 550 x 450 mm
Weight 21 kg
Noise level 58 dB @ 1 metre
Description Accessories included Part Number
SP70 Electric Suction Pump 2 x MAK 2000 jars 312032
S U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S
Features and Benefits
14 Suction and Oxygen Therapy Range
Penlon Suction and Oxygen Therapy Range
SP20 Plus Electrical Suction Pump
Technical Specification
Power supply 220 - 240 V AC, 50 Hz
Rechargeable battery 12 V DC, 3.3 Ah
Use with battery Up to 60 minutes
Recharge time 6 to 8 hours
Maximum vacuum -80 kPa (-600 mmHg)
Dimensions (H x W x D) 280 x 175 x 390 mm
Weight 6 kg
Noise Level 58.5 dB @ 1 metre
SP30 Electrical Suction Pump
Technical Specification
Power supply 220 - 240 V AC, 50 - 60 Hz
Maximum vacuum -80 kPa (-600 mmHg)
Dimensions (H x W x D) 280 x 175 x 390 mm
Weight 4 kg
Noise level 61 dB @ 1 metre
Description Accessories included Part Number
SP30 Electric Suction Pump MAK 2000 jar 312031
Description Accessories included Part Number
SP20 Plus Electric Suction PumpRechargeable battery and MAK 2000 jar 312030
Suction and Oxygen Therapy Range 15
S U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S
Features and BenefitsPenlon Suction and Oxygen Therapy Range
V7 Portable Electric Suction Unit
Technical Specification V7 plus ac V7 mx
Weight 3.5 kg 4.5 kg
Power supply 220 VAC 110/240 VAC, 12 V (DC Battery)
Power consumption 120 VA 100 VA (AC), 84 W (DC)
Rechargeable battery N/A 12 V (4.5 Ah) Sealed Lead Acid
Use with battery N/A 65 minutes
AC internal battery charger N/A Yes
12 V cable (for ambulance use) N/A Yes
Bacteria filter Yes Yes
Suction capacity 30 L/min 30 L/min
Maximum vacuum -84 kPa (-630 mmHg) -84 kPa (-630 mmHg)
Description Part Number
V7 plus ac mains only suction unit only (without collection jar)
54050
V7 plus ac suction unit with one litre collection jar
54051
V7 mx suction unit only (AC/DC main with battery back-up, without collection jar)
54053
V7 mx Suction unit with one litre collection jar (AC/DC main with battery back-up)
54054
Accessories
Rolling stand suitable for all V7 models
54056
Transport bag 54057
Bacteria filter 54058
S U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S
Features and Benefits
16 Suction and Oxygen Therapy Range
Penlon Suction and Oxygen Therapy Range
East Receiver Jar
Technical Specification
Graduations 200 m
Materials
Jar: Polysulphone with integrally moulded handle
Lid: Glass filled nylon with removable polypropylene float shut-off
Harness Stainless steel with spring retention clips, ‘V’ bracket
Sterilisation HTS autoclavable to 140°C
Disinfection Savlon Hibitane or similar, Do Not Use Phenol Based Products
Height 280 mm
Weight 825 g
Volume 2000 ml capacity with 1600 ml working capacity
MAK Receiver Jars
Technical Specification MAK 500 MAK 1000 MAK 2000
Inlet connection ISO G ¼” M
Outlet connection to the patient Tubing connector Ø8.5 mm
Overflow protection Integrated float valve
Autoclave temperature 121°C (for 15 minutes)
Height 215 mm 260 mm 305 mm
Diameter 60 mm 110 mm 140 mm
Weight 240 g 550 g 620 g
Capacity 500 ml 1 L 2 L
Description Part Number
Complete autoclavable receiver jar
4750-004
Jar only 3833-001
Autoclavable Supplied with cradle and ‘V’ mount bracket
Suitable for use with all Penlon suction controllers
Suction and Oxygen Therapy Range 17
S U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S
Features and BenefitsPenlon Suction and Oxygen Therapy Range
Suitable for use with all Penlon suction controllers
Remote vacuum probe and 5 metre vacuum hose
Suitable for use with Penlon receiver jars
Penlon Mobile Suction Unit - Pipeline
Description Brackets/Suction Level Part Number
Suction unit three ‘V’ brackets High Suction Unit 315003
Description Part Number
MAK 500 jar with lid 312034
MAK 500 jar without lid 312042
Lid (with seal) for MAK 500 jar 312038
MAK 1000 jar with lid 312046
MAK 1000 jar without lid 312047
Lid (with seal) for MAK 1000 jar 312048
MAK 2000 jar with lid 312033
MAK 2000 jar without lid 312036
Lid (with seal) for MAK 2000 jar 312035
Carrier for MAK 2000 312056
Carrier for MAK 1000 312057
Wall mount for ‘V’ socket 3850-001
Disposable liner for MAK 2000 (1.8 Litre) (Box of 50)
312058
S U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S
Features and Benefits
18 Suction and Oxygen Therapy Range
Penlon Suction and Oxygen Therapy Range
Suitable for use with all Penlon suction controllers
Suitable for use with Penlon receiver jars
Remote vacuum probe and customer specified vacuum hose length
Penlon Theatre Suction Systems - Floor standing
Description Suction Type Part Number
Floor standing suction unit, remote, BS EN 737 probe, two parallel brackets, tubing and taper
High suction unit 9910-147
Floor standing suction unit, remote, BS EN 737 probe, two ‘V’ brackets, tubing and taper
High suction unit 9910-244
A versatile medical rail system for all wall mounting and mobile trolley applications
The multi-rail clamp system, fits Penlon; Vickers’ Modura; DIN; and Ohmeda (including Heavy Duty) medical rail systems
Penlon Medical Rail System
Features Benefits
Aluminium anodised extrusionThe strong aluminium construction will support any device designed for rail mounting
Profile accommodates all commonly used rail clamp systems
Cost effective alternative to bedhead trunking
Available in standard one, two or three metre lengths, (or in customer specified lengths, up to three metres)
Customer specific lengths can be ordered to fit the clinical environment
Complements Penlon’s extensive range of rail accessories
Comprehensive range of standard fittings and accessories
Mounts directly on the wall, using standard fixings
Rail clamp: 22, 44, and 54 mm
Leg/pole clamp, with or without ‘V’
‘V’ socket kit
Suction and Oxygen Therapy Range 19
S U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S
Features and BenefitsPenlon Suction and Oxygen Therapy Range
Penlon Medical Rail System and Multi-Rail Clamp System
Description Bracket Type Part Number
1 m rail with end caps and insert strip
N/A 330011-1M
2 m rail with end caps and insert strip
N/A 330011-2M
3 m rail with end caps and insert strip
N/A 330011-3M
22 mm universal rail clamp ‘V’ Bracket 1310-000
22 mm rail clamp None 1301-000
44 mm rail None 1302-000
Clamp for pole mounting ‘V’ bracket 1384-000
S U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S
Features and Benefits
Part of the InterMed Group
Doc. No. SOT0318FB / November 2018. Penlon, InterMed and SC760 are trademarks of Penlon Limited. All other trademarks are the property of their respective owners. BactiTrap is a registered trademark of Penlon Limited
© Penlon Ltd. 2018 All rights reserved
Generalt +44 (0) 1235 547000f +44 (0) 1235 547041w www.penlon.com
International Salest +44 (0) 1235 547001f +44 (0) 1235 547021e international.sales@penlon.com
UK Salest +44 (0) 1235 547036f +44 (0) 1235 547023e uk.sales@penlon.com
Technical Supportt +44 (0) 1235 547060f +44 (0) 1235 547061e tech.support@penlon.com
Penlon LimitedAbingdon Science Park Barton Lane, Abingdon OX14 3NB, UK
Penlon Suction and Oxygen Therapy Range
facebook.com/PenlonGlobal twitter.com/PenlonGloballinkedin.com/company/penlon-ltd
Penlon has a comprehensive range of products for anaesthesia, intubation, patient monitoring, and suction and oxygen therapy.
Penlon Oxygen Therapy Systems and Suction Control Systems are a comprehensive range of CE marked products for use in all hospital departments.