SUCTION AND OYGEN THERAPY SOLUTIONS...Polycarbonate flow tube and cover Durable, quality materials...

Penlon Suction and Oxygen Therapy RangeS U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S

Features and Benefits

Single and twin flowmeters available in oxygen or air configurations

Replacement plastic nipples available

Twin, Single and Low Flow Flowmeters

Features Benefits

0 – 15 L/min standard flow rate, Single flowmeter has Low flow, 0 – 3.5 and 0 – 5 L/min options

An array of flow options for most clinical requirements

Pressure compensation Prevents back pressure build up on flow indicator

Incorporates static charge dissipation device Ensure accurate readings

BS EN 737 probe, ⅛” NPT Universal thread or ⅜” BSP connector

Flowmeter accept a wide range of accessories

Polycarbonate flow tube and coverDurable, quality materials

Anodised aluminium body and control

Twin graduated scale Provides precision low flow control

Mounting options including DIN, DISS and AFNORMarket compatibility; extensive mounting options and pipeline connection types available

Technical Specification Standard Low Flow

Accuracy±0.5 L/min, or scale value ±10% (whichever is greater) ±0.15 L/min

Flow rate 15 L/min calibrated, >40 L/min max 40 L/min maximum

Scale increments0.5, 1.0, 1.5, from 2 to 10 in 1 L/min increments, 12 and 15 L/min

0 - 3.5 L/min: 0.125 L/min (0.125 to 1 L/min) 0.25 L/min (1 to 3 L/min)

0 - 5 L/min: 0.25 l/min

ConstructionPoly-acetal, polycarbonate flow tube and cover Polycarbonate housing

Inlet pressure 60 psi 60 psi

Dimensions (H x W) 235 x 80 mm without probe 155 x 70 mm

Weight 200 g 221 g

S U CT I O N A N D OX YG E N T H E R A P Y S O LU T I O N S


2 Suction and Oxygen Therapy Range

Penlon Suction and Oxygen Therapy Range

Low Flow Oxygen Flowmeter

Description Part Number

0 - 5 L/min, tubing nipple and BS EN 737 MK 4 probe

9910-183

0 - 5 L/min, tubing nipple and ⅜” BSP connector

9910-184

0 - 3.5 L/min, tubing nipple and BS EN 737 MK 4 probe

9910-116

0 - 3.5 L/min with tubing nipple and ⅜” BSP connector

9910-118

Twin Flowmeter 0-15 L/min

Description Gas Part Number

Tubing nipples and BS EN 737 MK 4 probe

Oxygen 9910-034Air 9910-032

Tubing nipples and ⅛” NPT universal thread

Oxygen 9910-217Air 9910-219

Tubing nipples and ⅜” BSP connector

Oxygen 9910-050Air 9910-051

Single Flowmeter 0-15 L/min


Tubing nipple and BS EN 737 MK 4 probe

Oxygen 9910-029Air 9910-030

Tubing nipple and ⅜” BSP connector

Oxygen 9910-020Air 9910-021

9⁄16” UNF fitting and BS EN 737 MK 4 probe

Oxygen 9910-176Air 9910-193

9⁄16” UNF fitting and ⅛” NPT universal thread

Oxygen 9910-233Air 9910-234

9⁄16” UNF fitting and ⅜” BSP connector

Oxygen 9910-177Air 9910-201

Tubing nipple and ⅛” NPT universal thread

Oxygen 9910-216Air 9910-218

Twin flowmeter with tubing nipples

Single low flow flowmeter with BSP Connector

Single flowmeter with tubing nipple and MK 4 probe

Suction and Oxygen Therapy Range 3


Features and BenefitsPenlon Suction and Oxygen Therapy Range

Therapy Flowmeter Mounting Options

Features Benefits

Twin back bar only available with ⅜” BSP or ⅛” NPT Universal thread

Ability to mount multiple therapy sets using a single pipeline connector

Remote kit with ‘V’ plate for single or twin flowmeters, 2 m hose, available for oxygen and air (4 bar)

Facilitates mounting on crash carts or rail systems remote of central supply using the ‘V’ mount system

Remote kit with 44 mm rail clamp for single or twin flowmeters, 2 m hose, available for oxygen and air (4 bar)

Facilitates mounting on crash carts or rail systems remote of central supply using the medical rail system

A range of mounting options for Penlon’s Therapy Range


Twin back bar

⅜” BSP 4840-111

⅛”NPT universal thread 4840-132

Remote kit with 44mm rail clamp for single or twin flowmeter, 2 m hose

Oxygen 4310-196

Air (4 bar) 4310-201

4840-111

4310-201






Universal tubing nipple ½” BSF male thread Pack of 10

Oxygen and Air 2890-014

Universal tubing nipple 9⁄16” UNF female thread Pack of 10

Oxygen 3833-097

Air 3833-120


Bubble humidifier with occlusion protection (O.P.)

9410-006

Bubble humidifier (Standard) 9410-007

Adaptor for US fitting Pack of 10 2890-018

Technical Specifications Bubble Humidifier with O.P Bubble Humidifier (Standard)

Usable capacity 180 ml (between lines) 220 ml (between lines)

Safety valve 3 - 4 psi N/A

Inlet fitting 9⁄16” UNF union nut/bullnose ½” BSF male

Dimensions (H x W) 195 x 60 mm 140 x 84 mm

Weight 210 g 200 g

Penlon Bubble Humidifier

Features Benefits

Fully compatible with the Penlon flowmeter range Therapy options from a world class manufacturer

Reusable Cost effective alternative to disposable humidifiers

A choice of standard format or occlusion protection models

For use with Penlon therapy flowmeters

For the humidification of inspired gases

Note: order adaptor separately

9410-007

2890-014

3833-097

9410-006




A comprehensive range of regulators for medical gas therapy applications

High quality

Gas driven resuscitation/life support systems

Medical Gas Regulators

Features Benefits

Therapy regulator with Bullnose or Pin-index inlet, and ⅜” BSP or Schrader outlet An array of inlets and flow setting options to support

most connectors and clinical requirementsSelectable regulator with Bullnose or Pin-index inlet, ⅜” BSP or Schrader outlet, and flow settings

Easy to use, quiet operation Creating comfortable clinical environments

High quality, precision components Provide accurate variable output flows

Selectable Flow Regulators


Pin-index, O2, regulator with hose nipple outlet

321032

Bullnose O2, regulator with hose nipple outlet

321033

Pin-indexed O2 regulator with quick release (Schrader-type) pressure and hose nipple outlets

321034

Bullnose, O2 regulator with quick release (Schrader-type) pressure and hose nipple outlets

321035

321032 321033

321034 321035

Therapy Regulators


Bullnose Air Regulator with side-mounted gauge and 3⁄8”outlet

321045

Bullnose, O2 regulator with 3⁄8” BSP outlet

321040

Bullnose, O2 regulator with quick release (Schrader-type) pressure outlet

321041

Pin-index, O2, regulator with 3⁄8” BSP outlet

321038

Pin-index, O2, regulator (Schrader-type)

321039321038 321039

321041

321045 321040





Penlon SC760 Suction Controller

Features Benefits

0 – 20 kPa low suction range Ideal for continuous drainage application

0 – 86 kPa high suction range Ideal for tracheal and bronchial application

Colour coded high or low suction models Differentiation for additional safety

Supplied with BactiTrap® anti-bacterial filterHigh performance filter offering central pipeline protection

Direct or remote connector options Multiple off the wall mounting options

Vacuum adjustment and separate on/off switch Simple dual control for maximum performance

MRI Compatible* Can be used in all clinical environments

Twin unit available (high suction only) Dual suction from a single source

Lightweight plastic design Colour coded body for additional safety - Yellow body: high suction - Blue body: low suction

Excellent performance

Uncompromising safety User-friendly gauge design, marked for high, medium or low usage

Multiple connector and mounting options

*MRI compatibility relates to the SC760 MRI controller kit – high suction, forward facing mounting with 2 or 4 m hose (5006846 or 5007495). This product is certified as MRI safe for use with 1.5 and 3 tesla scanners, up to the 1000 gauss line.

Description Suction Type Part Number

SC760 Direct connection BS5682 Probe

High suction unit 310101

Low suction unit 310102

SC760 Remote, with ‘V’ plate



SC760 Remote with 44 mm rail clamp



SC760 with ⅛” NPT Universal thread


Twin Direct SC760 High suction unit 310109

SC760 MRI controller kit – forward facing with 2 m hose


SC760 MRI controller kit – forward facing with 4 m hose

High suction unit 5007495Low Suction Unit

High Suction Unit




Technical Specifications High Suction Controller Low Suction Controller

Performance 0 - 750 mmHg 0 - 150 mmHg

Controls• On / Off switch • 270° vacuum control knob

• On / Off switch • 270° vacuum control knob

Gauge accuracy ±2% ±2%

Filter BactiTrap® BactiTrap®

Safety Positive pressure restrictor Over vacuum safety relief valve set at 150 mmHg

Dimensions (H x W x D) 275 x 105 x 100 mm 275 x 105 x 100 mm

Dimensions with probe (H x W x D)

275 x 105 x 160 mm 275 x 105 x 160 mm

Weight 540 g 620 g

Compliance International standard ISO 10079-3

Penlon East Suction Controller

Features Benefits

0 – 20 kPa low suction rangeUser specific ranges

0 – 86 kPa high suction range

Lightweight construction Colour coding for additional safety

Supplied with BactiTrap® anti-bacterial filterHigh performance filter offering central pipeline protection

Direct or remote connector options Multiple off the wall mounting options

Vacuum adjustment and separate on/off switch Simple dual control for maximum performance

Twin unit available (high suction only) Multiple suction from a single source

Ideal for general hospital aspiration procedures

Direct action diaphragm A choice of direct or remote connector probes






Suction controller BS EN 737 direct probe

High suction unit 9510-025

Low suction unit 9510-029

Suction controller BS EN 737 remote probe, with ‘V’ bracket



Suction controller BS EN 737 remote probe, with 44 mm universal rail clamp



Suction controller ⅛” NPT universal thread



9510-025

9510-030




Penlon Intermittent Suction Controller

Features Benefits

Single action, instant switch between continuous and intermittent suction modes

Easy to use, high performance suction unitEasy adjustment of vacuum level with large control and progressive action

Separate on/off switch Simple dual control for maximum performance

Supplied with BactiTrap® anti-bacterial filter High performance filter

Automatic vacuum relief Hassle free vacuum release

Range of cycling times for ‘Suction On’ and ‘Suction Off’ in intermittent mode

Versatile suction options

Ability to switch to intermittent operation Suitable for all general hospital aspiration procedures

Suction Controller with intermittent and continuous modes

7 – 40 kPa vacuum range

Technical Specifications

Pressure gauge Diameter 63 mm

Gauge accuracy ±2%

Controls On/Off lever with automatic vacuum relief

Safety Positive pressure restrictor

Filter BactiTrap®

Compliance International standard: ISO 10079-3

Minimum controllable vacuum 7 kPa / 50 mmHg

Maximum vacuum 40 kPa / 300 mmHg

Flow rateContinuous mode: 35 L/min (minimum)

Intermittent mode: 10 L/min (approximately)

Intermittent timing (factory default)

16 seconds On

8 seconds Off (approximately)

Dimensions (H x W x D) 275 x 105 x 125 mm

Dimensions with probe (H x W x D)

275 x 105 x 195 mm

Weight 950 g






High Vacuum, intermittent controller with ⅛” NPT universal thread, and BactiTrap® filter

310165

Connector and Tubing 1 m 4160-001

Connector and Tubing 2 m 4160-002

Tapered connector 3833-077




Technical Specification

Height 80 mm

Diameter 67 mm

Flowrate 55 L/min

Pressure drop 80 mmHg

Filter efficiencyIn excess of 99.9% when challenged with Staphylococcus aureus (0.8 - 1.0 µ)

Positive mechanical shut of Actuating volume 15 ml

UK patent no 2272379B


Bacterial filter and over-flow protection

4830-014

Box of 48 9970-001

BactiTrap® Anti-bacterial Filter

Features Benefits

Prevents overflow from suction device into Pipeline System

High performance filter; easy to use and simple filtration unit, to protect suction devices and pipeline system

Controls spread of bacteria and viruses

Prolongs life of suction device

Visual indication of contamination, and suction cut-off gives instant hazard warning of aspirated material overflow

Available in a box of 48

High Performance anti-contaminate unit for your Vacuum Pipeline System

Combining filtration of airborne and droplet-borne bacteria

Protection from aspirated material overflow





Penlon AV500 Injector Suction Unit

Features Benefits

Medical Air driven and quiet operation Minimal noise disturbance in critical environments

Autoclavable polycarbonate safety jar with overflow protection device

Cost effective, high quality suction unit, with reusable jarChrome plated body with needle valve system

Provides the maximum vacuum with the minimum usage of gas

500 and 2000 ml jar options Options to suit multiple clinical requirements

Needle valve system Accurate vacuum adjustment

Vacuum gauge as standard

High specification, with collection jar and mounting options

Fitted with air inlet probe

Compatible with Penlon cylinder regulators

Rail mounted options available

The AV500 is a compact and reliable injector suction unit

Ideal for mounting on an emergency trolley or bed


Rail mounted injector suction unit with MAK 500 jar

5000915

Injector suction, unit only with MAK 500 jar

312040



Classification High suction injector

PerformanceVacuum 450 mmHg

Suction flowrate 25 L/min

Power sourceHigh pressure air, piped or bottled. Driving gas consumption 20% above input flow

Pressure gauge 63 mm diameter, calibrated 0 - 760 mmHg

Construction Aluminium anodised body, Polycarbonate filter bowl

Sterilization 120°C

For details of our full range of accessories contact our Sales Office




Electrical Suction Units

Features Benefits

Filter and overflow protection device on all models Protection for pumps

SP70 mobile unit with braked castors for theatre use; high flow-rate (up to 60 L/min) and two 2-litre receiver jars

Mobile with high capacity jar

SP30 for wards and clinics with 25 L/min flow rate and a 2-litre receiver jar

Compact unit with high capacity jar

SP20 Plus for emergency services, wards and clinics with mains/battery operation, 15 L/min flow rate and a 2-litre receiver jar

Versatile, portable, multi-purpose, with high capacity jars

V7 Portable Electric Suction Units emergency services, wards and clinics with mains/battery operation, 30 L/min flow rate, and a 1-litre receiver jar. Fittings are compatible with other popular canister and disposable liner systems

Portable, with medium range flow rate

Wide range of high quality, quiet, electric suction units

For theatre, wards, clinics and emergency applications

SP70 Electrical Suction Pump


Power supply 220 - 240 V AC, 50 - 60 Hz

Maximum vacuum -90 kPa (-675 mmHg)


Weight 21 kg

Noise level 58 dB @ 1 metre

Description Accessories included Part Number

SP70 Electric Suction Pump 2 x MAK 2000 jars 312032





SP20 Plus Electrical Suction Pump


Power supply 220 - 240 V AC, 50 Hz

Rechargeable battery 12 V DC, 3.3 Ah

Use with battery Up to 60 minutes

Recharge time 6 to 8 hours



Weight 6 kg

Noise Level 58.5 dB @ 1 metre

SP30 Electrical Suction Pump


Power supply 220 - 240 V AC, 50 - 60 Hz



Weight 4 kg

Noise level 61 dB @ 1 metre


SP30 Electric Suction Pump MAK 2000 jar 312031


SP20 Plus Electric Suction PumpRechargeable battery and MAK 2000 jar 312030




V7 Portable Electric Suction Unit

Technical Specification V7 plus ac V7 mx

Weight 3.5 kg 4.5 kg

Power supply 220 VAC 110/240 VAC, 12 V (DC Battery)

Power consumption 120 VA 100 VA (AC), 84 W (DC)

Rechargeable battery N/A 12 V (4.5 Ah) Sealed Lead Acid

Use with battery N/A 65 minutes

AC internal battery charger N/A Yes

12 V cable (for ambulance use) N/A Yes

Bacteria filter Yes Yes

Suction capacity 30 L/min 30 L/min

Maximum vacuum -84 kPa (-630 mmHg) -84 kPa (-630 mmHg)


V7 plus ac mains only suction unit only (without collection jar)

54050

V7 plus ac suction unit with one litre collection jar

54051

V7 mx suction unit only (AC/DC main with battery back-up, without collection jar)

54053

V7 mx Suction unit with one litre collection jar (AC/DC main with battery back-up)

54054

Accessories

Rolling stand suitable for all V7 models

54056

Transport bag 54057

Bacteria filter 54058





East Receiver Jar


Graduations 200 m

Materials

Jar: Polysulphone with integrally moulded handle

Lid: Glass filled nylon with removable polypropylene float shut-off

Harness Stainless steel with spring retention clips, ‘V’ bracket

Sterilisation HTS autoclavable to 140°C

Disinfection Savlon Hibitane or similar, Do Not Use Phenol Based Products

Height 280 mm

Weight 825 g

Volume 2000 ml capacity with 1600 ml working capacity

MAK Receiver Jars

Technical Specification MAK 500 MAK 1000 MAK 2000

Inlet connection ISO G ¼” M

Outlet connection to the patient Tubing connector Ø8.5 mm

Overflow protection Integrated float valve

Autoclave temperature 121°C (for 15 minutes)

Height 215 mm 260 mm 305 mm

Diameter 60 mm 110 mm 140 mm

Weight 240 g 550 g 620 g

Capacity 500 ml 1 L 2 L


Complete autoclavable receiver jar

4750-004

Jar only 3833-001

Autoclavable Supplied with cradle and ‘V’ mount bracket

Suitable for use with all Penlon suction controllers





Remote vacuum probe and 5 metre vacuum hose

Suitable for use with Penlon receiver jars

Penlon Mobile Suction Unit - Pipeline

Description Brackets/Suction Level Part Number

Suction unit three ‘V’ brackets High Suction Unit 315003


MAK 500 jar with lid 312034

MAK 500 jar without lid 312042

Lid (with seal) for MAK 500 jar 312038







Carrier for MAK 2000 312056

Carrier for MAK 1000 312057

Wall mount for ‘V’ socket 3850-001

Disposable liner for MAK 2000 (1.8 Litre) (Box of 50)

312058






Suitable for use with Penlon receiver jars

Remote vacuum probe and customer specified vacuum hose length

Penlon Theatre Suction Systems - Floor standing


Floor standing suction unit, remote, BS EN 737 probe, two parallel brackets, tubing and taper


Floor standing suction unit, remote, BS EN 737 probe, two ‘V’ brackets, tubing and taper


A versatile medical rail system for all wall mounting and mobile trolley applications

The multi-rail clamp system, fits Penlon; Vickers’ Modura; DIN; and Ohmeda (including Heavy Duty) medical rail systems

Penlon Medical Rail System

Features Benefits

Aluminium anodised extrusionThe strong aluminium construction will support any device designed for rail mounting

Profile accommodates all commonly used rail clamp systems

Cost effective alternative to bedhead trunking

Available in standard one, two or three metre lengths, (or in customer specified lengths, up to three metres)

Customer specific lengths can be ordered to fit the clinical environment

Complements Penlon’s extensive range of rail accessories

Comprehensive range of standard fittings and accessories

Mounts directly on the wall, using standard fixings

Rail clamp: 22, 44, and 54 mm

Leg/pole clamp, with or without ‘V’

‘V’ socket kit




Penlon Medical Rail System and Multi-Rail Clamp System

Description Bracket Type Part Number

1 m rail with end caps and insert strip

N/A 330011-1M


N/A 330011-2M


N/A 330011-3M

22 mm universal rail clamp ‘V’ Bracket 1310-000

22 mm rail clamp None 1301-000

44 mm rail None 1302-000

Clamp for pole mounting ‘V’ bracket 1384-000



Part of the InterMed Group

Doc. No. SOT0318FB / November 2018. Penlon, InterMed and SC760 are trademarks of Penlon Limited. All other trademarks are the property of their respective owners. BactiTrap is a registered trademark of Penlon Limited

© Penlon Ltd. 2018 All rights reserved

Generalt +44 (0) 1235 547000f +44 (0) 1235 547041w www.penlon.com

International Salest +44 (0) 1235 547001f +44 (0) 1235 547021e [email protected]

UK Salest +44 (0) 1235 547036f +44 (0) 1235 547023e [email protected]

Technical Supportt +44 (0) 1235 547060f +44 (0) 1235 547061e [email protected]

Penlon LimitedAbingdon Science Park Barton Lane, Abingdon OX14 3NB, UK


facebook.com/PenlonGlobal twitter.com/PenlonGloballinkedin.com/company/penlon-ltd

Penlon has a comprehensive range of products for anaesthesia, intubation, patient monitoring, and suction and oxygen therapy.

Penlon Oxygen Therapy Systems and Suction Control Systems are a comprehensive range of CE marked products for use in all hospital departments.

SUCTION AND OYGEN THERAPY SOLUTIONS...Polycarbonate flow tube and cover Durable, quality materials...

Documents

Transcript of SUCTION AND OYGEN THERAPY SOLUTIONS...Polycarbonate flow tube and cover Durable, quality materials...