SUBURBAN DYNAPACK SPECIFICATIONS Designed...

Post on 31-Jul-2018

215 views 0 download

Transcript of SUBURBAN DYNAPACK SPECIFICATIONS Designed...

Designed And Built To Perform With Efficient Reliability.RA7-14/2MPrinted in U.S.A.

676 Broadway Street • Dayton, Tennessee 37321 • (423) 775-2131 • Fax: (423) 775-7015

Vertical Packaged Air Conditioner Featuring Gas Heat/Electric Cooling

Ideal For Multi-Family Applications

Fully Self-Contained Heating and Cooling System That Provides Designers and Builders with a Cost Effective Alternative to Condition Multiple Rooms.

• 1 to 3 Tons Cooling

• 36 – 60 MBTU GAS Heat

• No Outside Condensing Unit

• S Series – Standard – 80% AFUE

• H Series – High Efficiency – 90%+ AFUE

• R-410A Refrigerant

• Insulated 16 GA Coated Steel Base Pan

MODEL Height Width Depth

S and H Models - Dimensions In Inches

DYPA18, 18H DYPA24, 24H DYPA30, 30H DYPA36, 36H

DYPA12, 12H 60-1/260-1/260-1/264-1/264-1/2

28-1/828-1/828-1/828-1/8

24-1/224-1/224-1/2

24-1/224-1/228-1/8

www.suburbanmanufacturing.com

Suburban Division

¹The official energy descriptor recognized by Department of Energy for this type of unit is EER. ²Unit Tested to ANSI/AHRI Standard 390.

Warranty: The DynaPack is backed by a one year limited warranty on parts and labor and

a five year limited warranty on the compressor and heat exchanger.

¹The official energy descriptor recognized by Department of Energy for this type of unit is EER. ²Unit Tested to ANSI/AHRI Standard 390.

COOLINGSOUND

PRESSURELEVELS

Btuh EER²Seer¹ Refrigerant Indoor(dBA)

Outdoor(dBA)

HEATING

64 69

64 69

64 69

64 74

R-410A

R-410A

R-410A

R-410A

R-410A 64 74

11

12

12.1

12.35

11.5

10.2

10.6

10.6

10.7

10

12,000

17,500

25,200

30,200

34,800

80%

80%

80%

80%

80%

InputBtuh

35,50047,50035,50047,50059,00035,50047,50059,00035,50047,50059,00035,50047,50059,000

OutputBtuh

28,40038,00028,40038,00047,20028,40038,00047,20028,40038,00047,20028,40038,00047,200

DYPA12AC1A036DYPA12AC1A048DYPA18AC1A036DYPA18AC1A048DYPA18AC1A060DYPA24AC1A036DYPA24AC1A048DYPA24AC1A060DYPA30AC1A036DYPA30AC1A048DYPA30AC1A060DYPA36AC1A036DYPA36AC1A048DYPA36AC1A060

S SERIESMODEL

AFUE

SUBURBAN DYNAPACK SPECIFICATIONS

COOLINGSOUND

PRESSURELEVELS

Btuh EER²Seer¹ Refrigerant Indoor(dBA)

Outdoor(dBA)

HEATING

12,000 11 10.2 R-410A

R-410A

R-410A

R-410A

R-410A

64 69

64

64

64

64

6912 10.617,500

AFUE

92%92%91%

InputBtuh

OutputBtuh

39,00039,00052,000

52,000

52,000

52,000

36,00036,000

47,300

47,300

47,300

47,300

DYPA12AC1A039HDYPA18AC1A039HDYPA18AC1A052H

6912.1 10.625,20092%91%

39,000 36,000DYPA24AC1A039H

DYPA24AC1A052H

7410.712.3530,20092%39,000 36,000DYPA30AC1A039H91%DYPA30AC1A052H

7411.5 1034,80092%39,000 36,000DYPA36AC1A039H91%DYPA36AC1A052H

H SERIESMODEL

Designed And Built To Perform

With Efficient Reliability

5.225

35 oz.

Rotary ReciprocatingR410A

8.343

43 oz.10.954

85 oz.13.174

96 oz.1688

96 oz.

Type Refrigerant type (HCFC) Unit refrigerant charge ounces Rated load amps Locked rotor amps

COMPRESSOR

4.0/.50/1050

0.90.9/0.125/1075 1.3/0.25/1075

Indoor motor (ECM) FLA/HP/RPM Condensor motor FLA/HP/RPM Combustion motor FLA

MOTORS

Specifications subject to change without notice. Installation must be in accordance with local codes and regulations.

NaturalDirect Spark1/2 inch NPT3/4 inch NPT

Gas (specify) Ignition system: solid state Gas connection size Condensate connection size

GAS CONTROLS AND ADDITIONAL DATA

ELECTRICAL DATA

SPECIFICATIONS BELOW ARE THE SAME FOR FOR STANDARD AND H SERIES

Volts/Phase/Cycle 208/230-1-60 Minimum Circuit Ampacity 13.3

1514.920

17.825

21.630

25.240 Maximum Fuse/HACR breaker size

DYPA12 DYPA18 DYPA24 DYPA30 DYPA36 MODEL

Fully Self-Contained Heating and Cooling System

Air Exhaust by Condenser Fan

Grille Mounts Flush to Outside Wall

Back View of DynaPack with Sleeve/Grille Attached

Air Intake To Condenser Coil

Optional Grille Colors Available

DynaPack: The Cost Effective Alternative To Condition Multiple Rooms.Featuring 1 to 3 Tons Cooling and Efficient 36 to 60 MBTU Gas Heat.

No Outside Condensing Unit

Five-Speed ECM Motor for Higher Efficiency and Maintaining a

Programmed and Proper Airflow

R410a Refrigerant

Direct Vent System

Insulated 16 GA Coated Galvanized Steel Base Pan Eliminates Need for Field

Added Platform

Individually Metered and Controlled

Pre-Wired and Pre-Charged

at the Factory

One Unit May be Ductedfor Multiple Room

Conditioning

Easy To Install In Almost Any Application

Internal Washable Filter/ Optional MERV13 filter

S Series - 80% AFUEH Series - 90%+ AFUE

..............................

Ideal for Multi-Family Applications.

............

The standard wall sleeve fits a 4 inch wall thickness and includes the option to expand to a 6”, 8”, 10”, 12”, 14”, 16”, 17”, 18”, 20” and 22” size.

Flexible-Depth Wall Sleeve Design

Reversible drain pan collects rain water that can be drained internally or externally.