Post on 21-Oct-2015
description
SHIPPING
ROPESSINCE 1796
2
SCANROPE MARINE ASA proud reputation built over 210 years
Since 1796 and throughout its more than 210 years of business, ScanRope has played an active part in the development of Norwegian industry. ScanRope was established to supply ropes for maritime activities.
The company, however, has continually adapted to the modern world, applying the latest techniques and pioneering new processes and products.
ScanRope Marine AS was established January 1st 2004 to concentrate shipping related activities into a separate company. The KARAT ropes are produced at the ultra-modern manufacturing facility of Eurorope Performance Rope Producer in Thiva, Greece.
Our objectives are, of course, to become a better supplier of shipping ropes and related services than ever.
The ropewalk where ropes of 360 metres were manufactured.
3
SCANROPE MARINE AS
Postal address: P.O. Box 295,
N-3101 Tønsberg, Norway
Visitor address: Banebakken 38,
N-3127 Tønsberg, Norway
Tel.: + 47 333 555 00
Fax: + 47 333 555 03
E-mail: mailbox@scanropemarine.no
VAT/Reg No NO 986 466 800
VAT/Reg No NL 8040.20.991.B01
Swiftcode: DNBANOKKTNS
Acc.No.: 7177.05.71507
IBAN EUR: NO26 7176 0447 670
IBAN NOK: NO02 7177 0571 507
Contacts
Name Phone E-mail
Nielsen, Per SverreManaging Director
+47 333 555 16 psn@scanropemarine.no
Fevang, RandiProduction co-ordinator /QA Manager
+47 333 555 42 rf@scanropemarine.no
Haugan, FinnExport Manager
+47 333 555 21 fha@scanropemarine.no
Herholdt, ToreSales Manager Norway
+47 333 555 18 the@scanropemarine.no
Peterzéns, WencheSales Representative
+47 333 555 32 wep@scanropemarine.no
Andersen, Elin ShanksSales Export
+47 333 555 20 esa@scanropemarine.no
4
QUALITY ASSURANCE
ScanRope Marine is certified according to NS-EN ISO 9001:2000DNV Sertificate NO-2004-OSL-AQ-7567
DNV Type Approval Certificate No. K-3590 for KARAT® WINCHline DNV Type Approval Certificate No. K-2696 for KARAT® MAXI
5
IDENTIFICATION
ScanRope Marine has implemented ID marking on all KARAT®
fibre rope products, both mooring ropes and tails.
Each mooring rope or tail has a stainless ID-tag with an individual
four or five digit number. This number is also endorsed on the
corresponding individual certificate.
The ID-tag is located in the splice of the mooring rope or tail
(one ID-tag per eye splice).
With the ScanRope Marine ID-marking, keeping record of rope
performance and age will be an easy task.
Certificate No. 100434-01-2004-1802The ID number on the stainless tag corresponds to the last four or five digits of the certificate number.
6
KARAT® MAXI8-STRAND
KARAT® MAXI has become standard terminology in high
quality mooring applications. Very high strength/weight
ratio allows substantial size reductions and ease in
handling, as well as providing excellent overall economy.
KARAT® MAXI ropes are made from the unique material
EStalon™, UV resistant Polyester blend.
DNV Type Approval Certificate No. K-2696.
• Higheststrengthoftheconventional mooringropes• Nolossofstrengthwhenwet• Lowweight-easyhandling• Lowelongation• Verylowsnap-backeffect• ManufacturedacctoISOandOCIMF• Estalon™isapolyester/polypropylene meltmixture
Melting point: 185˚C
Spec. Gravity: 0,99
Water absorption: 0%
Reduction of MBL when wet: 0%
Bending Ratio, Dynamic ISO 3730 9:1
Elongation, new rope: 18%
Elongation, broken-in ropes (15-20 operations) 11%
Dia Weight MBL mm kg/100m kN Tonnes
32 51 206 21,0 36 65 259 26,4 40 79 320 32,6 44 95 382 38,9 48 113 449 45,8 52 133 521 53,1 56 154 599 61,1 60 176 680 69,3 64 201 769 78,4 68 227 862 87,9 72 254 961 98,0 76 283 1070 109,1 80 314 1184 120,7 88 380 1344 137,0 96 452 1589 162,1 104 531 1815 185,0 112 615 2090 213,0 120 706 2394 244,0 128 803 2717 277,0 136 907 3071 313,0 144 1016 3414 348,0
30 years after they were first released onto the
marine rope market, Karat® Maxi ropes are still
the benchmark against which mooring lines must
be measured, having proved their reliability and
durability time and time again.
7
KARAT® MAXI TAILS8-STRAND
ScanRope Marine supplies a wide range of
KARAT® MAXI mooring tails to suit
different dimensions steel wire mooring ropes.
We can offer both single leg TAILS and double
leg endless RINGTAILS.
Mooring tails are typically supplied in lengths
of 11 m with 2,0 m and 1,0 m covered eyes.
Studies performed by OCIMF have indicated tail
lengths of 22 m for exposed berths.
Because synthetic ropes are likely to deteriorate
more rapidly than wire ropes, tails should be
at least 25% stronger than the steel wire ropes
to which they are attached (NOTE: +37% for
Nylon).
The mooring tails should be inspected frequently
and replaced at regular intervals.
(18 months as per OCIMF recommendations)
See below tables with MBL for typical dia steel
wire mooring ropes construction
6x36WS+IWRC (steel core) tensile
1960 N/mm2. The tables also provide strength
calculations for selecting suitable dia KARAT®
MAXI TAILS or RINGTAILS.
Steel wire rope6x36WS+IWRC
Dia, mm MBL, kNRequired MBLfor tail, kN
KARAT® MAXI TAILS Weight Dia, mm MBL, kN kg
KARAT® MAXI RINGTAILS Weight Dia, mm MBL, kN kg
32343638404244
715807905
1010111712321352
894100911311263139615401690
727680889696
104
961107011841344158915891815
455057708585
102
56606468727676
958108812301379153817121712
Steel wire rope6x36WS+IWRC
Dia, mm MBL, TRequired MBL
for tail, TKARAT® MAXI TAILS Weight Dia, mm MBL, T kg
KARAT® MAXI RINGTAILS Weight Dia, mm MBL, T kg
32343638404244
72,982,492,3
103,0114,0126,0138,0
91,2103,0115,4128,8142,5157,5172,5
727680889696
104
98,0109,1120,7137,0162,1162,1185,0
455057708585
102
56606468727676
97,7110,8125,4140,6156,8174,5174,5
40475462707878
40475462707878
8
TØNSBERG MOORING LINK Tønsberg Mooring Link - galvanised steel mooring link of compact design typically utilised as connection between wire rope and fibre tail. Available in three sizes 90 T, 120 T and 180 T. 300 T can be supplied on special request.
Fibre rope around the bolt, wire rope around the body.
Each link is proof tested and certified by DNV.DNV type approval certificate No. S-4718
CB
R
D
E
A
Link 90 T Link 120 T Link 180 T Tail 56-68 mm Tail 72-80 mm Tail 88-112 mmA = 285 mm A = 324 mm A = 350 mmB = 115 mm B = 142 mm B = 184 mmC = 136 mm C = 150 mm C = 160 mmD = 65 mm D = 75 mm D = 85 mmE = 75 mm E = 90 mm E = 120 mmR = 22 mm R = 28 mm R = 30 mmBreaking load: Breaking load: Breaking load:90 Tonnes 120 Tonnes 180 TonnesProof Load: Proof Load: Proof Load:55 Tonnes 70 Tonnes 95 TonnesWeight: Weight: Weight:11,2 Kg 16,9 Kg 25 Kg
Tønsberg Mooring Link 300 T
A = 447 mmB = 216 mmC = 190 mmD = 110 mmE = 146 mmR = 36 mmBreaking load:300 TonnesSafe working Load:100 TonnesWeight:52 KgWith works certificate
Tønsberg Mooring Link with roller
120T 180TOpening E = 90mm 120mmRoller dia D = 82mm 97mm
E
A
BR
D
C
D
E
9
MANDAL FAIRLEAD SHACKLE Mandal Fairlead Shackle - Stainless steel mooring shackle with sleek shape designed to pass through fairleads. Available in two sizes 90 M and 120 M.
Wire rope around the sheave, fibre rope around the body.
Each shackle is proof tested and certified by DNV.DNV type approval certificate No. S-4719
CB
R
D
E
A
F
Shackle 90 M Shackle 120 MTail 56-64 mm Tail 68-80 mmA = 255 mm A = 300 mmB = 97 mm B = 121 mmC = 120 mm C = 130 mmD = 65 mm D = 82 mmE = 67 mm E = 90 mmF = 100 mm F = 128 mmR = 34 mm R = 45 mmBreaking load: Breaking load:90 Tonnes 120 TonnesProof Load: Proof Load:55 Tonnes 70 TonnesWeight: Weight:7,8 Kg 13,3 Kg
DnV Type Approval Certificate S-4718 Tønsberg mooring link
DnV Type Approval Certificate S-4719Mandal fairlead shackle
10
KARAT® WINCHline6-STRAND
KARAT® WINCHline combines the unique characteristics
of the high strength KARAT-fibres with a 6-strand
”wire rope” lay. The outer layer of each strand comprises
a special combination of Nylon monofilaments and
Nylon multifilaments. KARAT® WINCHline is designed
to be used on selftensioning winches.
DNV Type Approval Certificate No. K-3590.
•Highresistancetodeformation
•Nocrushingorjammingonwinch
•Highabrasionresistance
•Excellentfatiguepropertiesgiving
longerlifetime
•Highstrengthgivesbettersafety
•Lowelongation
•Maintenancefree
Melting point 250˚C
Spec. Gravity 1,1
Water absorption 2%
Reduction of MBL when wet 1%
Bending Ratio, Dynamic ISO 3730 12:1
Elongation, new rope: 25%
Elongation, broken-in ropes (15-20 operations) 18%
Dia Weight MBL mm kg/100m kN Tonnes40 104 324 33 44 121 412 42 48 144 491 50 52 169 530 54 56 197 657 67 60 225 706 72 64 257 804 82 68 290 922 94 72 325 1059 108 78 375 1157 11880 401 1236 126
11
BUOYANT WINCHline™6-STRAND
BUOYANT WINCHline™ is a unique fibre rope with a
6-strand ”wire rope” lay. The outer layer of each strand
comprises a special combination of Nylon monofilaments
and PP multifilaments. BUOYANT WINCHline™ is designed
to be floating and to be used on selftensioning winches.
•Lightweight-floats
•Highresistancetodeformation
•Nocrushingorjammingonwinch
•Highabrasionresistance
•Excellentfatiguepropertiesgiving
longerlifetime
•Highstrengthgivesbettersafety
•Lowelongation
•Maintenancefree
Melting point 250/165˚C
Spec. Gravity 0,99
Water absorption 2%
Reduction of MBL when wet 1%
Bending Ratio, Dynamic ISO 3730 12:1
Elongation, new rope 23%
Elongation, broken-in ropes (15-20 operations) 15%
Dia Weight MBL mm kg/100m kN Tonnes
40 99 308 31,4 44 115 391 39,9 48 137 466 47,5 52 161 503 51,3 56 187 625 63,7 60 214 671 68,4 64 244 764 77,9 68 276 876 89,3 72 309 1007 102,680 381 1174 119,7
12
12- STRAND
Twelve strand braided rope, made from DYNEEMA™
HMPE grade SK 75, with a braided jacket of polyester.
This gives a compact, round rope with a circular cross
section, and good spooling qualities.
Dynamax™ Plus with Polyester jacket is manufactured
for applications where heavy abrasion is expected.
Polyester has low friction against steel.
The rope can as an option be supplied with Dyneema
jacket, a buoyant alternative.
Applications: Mooring, towing, salvage.
•Highabrasionresistance
•Highstrength/weightratio
•Verylowelongation
•Balancedconstruction
Melting point 265 / 135°C
Spec gravity 1,06
Water absortion 0%
Reduction of MBL when wet 0%
Bending ratio, Dynamic ISO 3730 9:1
Elongation, new rope 5%
Elongation, broken-in ropes (15-20 operations) 3%
DYNAMAX™ PLUS Dia Weight MBLmm kg/100m kN Tonnes
8 4,2 53 5,4510 6,3 80 8,1712 9,1 116 11,8014 12,6 160 16,3416 16,1 205 20,8818 20,7 264 26,8720 25,2 321 32,6922 30,8 392 39,9524 36,4 463 47,2126 42,7 543 55,3828 49,7 632 64,4630 56,7 721 73,5432 60,9 775 78,9934 64,4 819 83,5336 73,5 935 95,3338 81,9 1042 106,2340 91,7 1167 118,9442 100,8 1283 130,7444 112,7 1434 146,1848 135,8 1728 176,1452 158,9 2022 206,1056 186,2 2369 241,5160 198,8 2530 257,8564 228,2 2904 295,98
13
DYNAMAX™
12- STRAND
Twelve strand braided rope, made from DYNEEMA™ HMPE
grade SK 75, has the highest strength to weight ratio in the
current range of braided ropes.
Melting point 135˚C
Spec. Gravity 0,97
Water absorption 0%
Reduction of MBL when wet 0%
Bending Ratio, Dynamic ISO 3730 9:1
Elongation, new rope 5%
Elongation, broken-in ropes (15-20 operations) 3%
Dia Weight MBLmm kg/100m kN Tonnes
6 2,2 35 3,68 4,0 62 6,3
10 6,0 97 9,912 9,3 137 14,014 10,7 184 18,816 15,0 244 24,918 19,6 303 30,920 23,1 374 38,122 28,9 450 45,924 33,5 533 54,426 38,5 612 62,428 45,5 701 71,530 52,5 789 80,532 59,0 887 90,534 65,0 991 101,136 71,0 1076 109,838 80,0 1191 121,540 88,5 1314 134,044 109 1559 159,048 126 1853 189,0
Special characteristics:
•Lightweight–floats
•Highstrength–similar,sizeforsize,towirerope
•Torquebalanced12strandbraidedconstruction
•Abrasionresistantpolyurethanecoating
14
8 / 12- STRAND
18-KARAT® rope is a product of modern ropemaking
technology. The latest yarn spinning techniques and
ropemaking expertise have been harnessed to create a
mooring line which successfully exploits the high strength
and light weight of the unique EStalon™ fibre and the
abrasion resistance and feel of high tenacity polyester.
18-KARAT® is outstanding for its durability, combined
with ease of handling.
Special characteristics:
•Highabrasionresistance
•Highstrength/weightratio–easytohandle
•Lowelongation
•Verylowsnap-backeffect
Melting point 265 / 185˚C
Spec. Gravity 1,05
Water absorption 0%
Reduction of MBL when wet 0%
Bending Ratio, Dynamic ISO 3730 9:1
Elongation, new rope 18%
Elongation, broken-in ropes (15-20 operations) 11%
Dia Weight MBL mm kg/100m kN Tonnes
18 KARAT®
32 57 206 21,036 71 259 26,440 84 320 32,644 104 382 38,948 123 449 45,852 145 521 53,156 166 599 61,160 189 680 69,364 215 769 78,468 243 862 87,972 288 961 98,080 337 1184 120,788 408 1344 137,096 486 1589 162,1
15
Agent Network
Country Company/city Website E-mail
CHILEE.E. Haugan y CIA, Ltd, Vina del Mar, Valparaiso
www.sms-haugan.nu ekhaugan@hotmail.com
DENMARKPeter Harbo, Esbjerg
www.harbo.dk salg@harbo.dk
DUBAISeven Seas Shipchandlers. Dubai
www.sevenseasgroup.com scanrope@sevenseasgroup.com
GERMANYEmder Ship Supply, Emden
www.emder.de ropes@emder.de
ITALYMercandino SRL, Genova
www.mercandino.it info@mercandino.it
JAPANKyoei Marine Co., Ltd, Yokohama
kyoei@s9.dion.ne.jp
LATVIASkanol Ltd., Riga
skanol@skanol.lv
THE NETHERLANDS
Endenburg B.V. Gouda
www.endenburg-gouda.nl info@endenburg-gouda.nl
SINGAPOREGimex Pte Ltd, Singapore
www.gimex.com gimex@pacific.net.sg
SPAINNoko Land & Marine, Irún,
www.nokolandmarine.com comercial@nokolandmarine.com
UKReel Ltd, Aberdeen
www.seaoceanropes.com info@seaoceanropes.com
USADiamond Braid International, Houston
www.diamondbraidintl.com
sales@diamondbraidintl.com
STOCK POINTS
Genova
Please direct all enquiries for KARAT MAXI to Tønsberg. Worldwide stocks are controlled from Tønsberg.
ScanRope Marine ASP.O. Box 2953101 Tønsberg, Norway
Phone: +47 33 35 55 00Fax: +47 33 35 55 03E-mail: mailbox@scanropemarine.noWeb: www.scanropemarine.no
Impu
ls R
ekla
meb
yrå
AS