Post on 01-Aug-2018
Technical Specification8-365 S-A2011-04-28
Sandvik DS411Underground Drill Rig
1/4
© 2
011
Sand
vik
Min
ing
and
Con
stru
ctio
n
Sandvik DS411 is a rock reinforcement drill rig thatinstalls all most common rockbolt types in combinationwith steel wire meshes when required.Provided with a strong and reliable boom, the TBR60, itcan install from one carrier setup, several rows of rock-bolts, from 1.5m to 3 meters long.
The extremely short but powerful RD314 rockdrilldelivers the best ratio between rockbolt lenght and driftheight. The rockbolting process is completely mecha-nized and controlled by a single operator from under aFOPS safety canopy.
As all the Sandvik drill rigs based on the NC7 carrierfamily, the Sandvik DS411 is designed for safety.For example, all the daily and routine checks are donewith both feet on ground.
Bolting coverageFrom W=3100mm x H=3100mmW=7600mm x H=8400mm
Boom TBR60
Bolting head BH
Rock drill RD314 R32 Female
Hole diameter 33-51mm
Bolt length From 1.5m to 3m (5’ to 10’)
Control system TPC301 EW
Carrier NC7N
Cornering 4250 mm
Total weight (depending on options)
Around 23000kg
Technical Specification
Sandvik DS4118-365 S-A2011-04-28
2/4
Coverage
C
B
A1920
4325
1200Zoom
200
55°
25°7580
68905400
All dimensions in mm
BoltingHead
BoltLength A B C
BH15 1.2-1.5 3100 6600 7900
BH18 1.2-1.8 3100 6600 7900
BH22 1.5-2.2 3550 6600 7900
BH24 1.5-2.4 3700 7100 8400
BH27 1.5-2.7 4000 7100 8400
BH30 1.5-3.0 4300 7100 8400
CBA
500
500 500 500
Minimum height Optimum height Maximum height
500 500
Rock Drill RD314Percussion power 14 kWPercussion pressure 120 - 160 barPercussion rate 110 HzRotation speed 0...300 rpmRotation torque Max. 505 NmHole size 33 - 51 mmShank adapter R32 Female Weight 115 kgFlushing water pressure
Max. 20 bar
Shank lubrication device Air /oil mist SLUShank lubrication compressor CT10, 1m³/min (7 bar)
Hydraulic rock drill Technical Specification 2-1055
Boom type TBR60
Boom lift55° Up25° Down
Boom swing45° Left45° Right
Boom head tilt35° Up55° Down
Boom head swing23° Left73° Right
Boom extension 1200 mmBolting head 358°*Cylinder rods Harsh water
Boom Technical Specification 8-5540
Bolting head type and feed BH and KS140Bolt caroussel capacity 8 Rockbolts
Bolting head Technical Specification 8-5200
*Bolting alternatives GCR, WI, S, BC*Screen handler On separate boom*Bolting instrumentation TMS D*Automatic resinshooting system
ARI
*Rod retainer (PITO 9H)For temporary long hole drilling with R32 male shank
*Bolt storage (front) Max. 2.4m length*Bolt storage (side)
*Drilling options
*Pressure cleaning system with reel
Max. 15 bar (11 bar additional to mine water network)
*High pressure cleaning system with reel
Max. 180 bar
*Cleaning system
*Greasing unit with pump, reel and nozzle
Manual
*Automatic greasing system Carrier and boom
*Greasing systems and options
*Optional features/components
Technical Specification
Sandvik DS4118-365 S-A2011-04-28
3/4
Machine dimensions
3100
1503040
12040 with Screen handlerAll dimensions in mm
1305
1095011220 with SUB 2i
3175 3965
55°
25°
2740
Optional cementbags platform
Filtration size20 microns (pressure)12 microns (return)
Oil coolerCooling capacity 30kWOW30 water cooling
Drilling oil tank Max. 200 litersTank filling Electric filling pumpPowerpack HPP355 (55kW)Percussion pump 100cc variable displacementRotation pump 33cc gear pump*Biodegradable oils Shell Naturelle HFE68
Hydraulic system
Type TPC301 EW
Power controlAjustable full powerAjustable collaring power
Anti-jamming controlAjustable anti-jamming pressure
Rotation controlAjustable rotation speedReversible rotation
Flushing controlWater flushing pressureAir-mist flushing, option
Returns automatics Rock drill
Control system
*Manual fire suppression system (Ansul)
6 nozzles +1x7,7kg hand held fire extinguisher
*Automatic fire suppression system (Ansul)
6 nozzles +1x7,7kg hand held fire extinguisher
*Hand held fire extinguisher 1x7.7kg
*Fire suppression system and options
Total input power 70 kWMain switch MSE 10Standard voltages 380-690 VACVoltage fluctuation +/- 10%Automatic cable reel TCR3ER with spooling systemCable reel control (in & out) Control at operator station Starting method Star delta*Ground fault and overcurrent protection
VYK
*Electric cable rubber or PUR100 or 150 meterssee spec 5-4100
*Optional voltage 1000 VAC
*Optional outlet
230V outlet 4500VA3-phase outlet, network voltage3-phase outlet max 15kVA, with transformer
*Remote control reel(s) At rear end
Electric system and *options
Flushing WaterWater pump WBP 1 (3 kW)Water pump capacity 50 l/min (Max. 10bar)Inlet pressure 2-7 bar (while drilling)Mine air network connection IP5 air cleaner
*Air mist flushing packagesFor external supply of air and waterFor internal air with CT16
*Bore hole air flushing (level1) Air compressor CT16*Bore hole air flushing (level2)*Bore hole air flushing (level3)*Water hose reel THR 2.5E*Water hose 32mm (1”1/4)
38mm (1”1/2)100 meters65 meters
Flushing system and *options
*Optional features/components
Technical Specification
Sandvik DS4118-365 S-A2011-04-28
4/4Sandvik Mining and Construction OyP.O Box 100. FIN-33311 Tampere, FinlandTel. +358 205 44 121, Fax +358 205 44 120www.sandvik.com
Sandvik Mining and Construction reserves the right to change this specification without further notice.
© 2
011
Sand
vik
Min
ing
and
Con
stru
ctio
n
Tramming dimensions
24552950
15° 13°
5°
30407520
3175
850
1137035°
750
750
F
C
35°
B
A
D
E
750
750
12040 with Screen Handler11590 with SUB 2i
A B C D E F
DS411 3350 6600 4000 3800 6850 3900
DS411 SUB 2i 3350 7600 5000 3800 6850 3900
DS411 SH 3350 6900 4250 3750 7250 4250
11°
10°
420
Tramming speed16 km/h on horizontal14% = 1:7 = 8° 5km/h
Gradeability / Inclination Max. 15° / 5°
Tramming
Safety canopy FOPS (ISO 3449)Controls Drilling and trammingSound pressure level according to EN791
Operator station: 102 dB(A)Emitted: 124 dB(A)
SeatErgonomic, adjustable with seat belt
Operator’s station
Front working lights 4 x 35W HID (24V) Front driving lights 2 x 35W HID (24V) Rear working lights 2 x 35W HID (24V) Rear driving lights 2 x 35W HID (24V) Remote controlled search 1 x 35W HID (24V) Mixer light (if P-System) 1 x 70W (24V)Parking rear brake lights 2 x Red LED*Extra working lights 2 x 35W HID (24V)
Lights
*Harsh water options (level 1) Oil cooler + boom cylinders
*Harsh water options (level 2)Level 1 + steering and jacks cylinders
*Regional AUS, USC, EUR
*AntifreezingBlock heater for engineHydraulic oil tank heaterWater circuit flushing
*Packages
Carrier type Wheel mounted, frame steeringCarrier name NC7N
TransmissionHydrodynamicSpicer T20 000
Axles SpicerTyres 12.00-20Diesel engine MB904LA, Tier III, 110kWExhaust Catalyser + Muffler Standard
Brakes
Service, hydraulic wet disc brakes Parking and emergency SAHR type, fail safewet disc brakes
Ground clearance 420 mmRear oscillation +/- 10°Frame steering +/- 35°Steering Frame steeringFuel tank 150 liters
Hydraulic jacksTJ40 (front telescopic)TJ60 (rear)
*Wheel clocks 2 pieces*Fast filling systems For fuel/complete*Battery jump start*Sealed gel batteries*Foam filled tyres*Basket boom SUB 2i, FOPS Safety canopy
Carrier
Spare rock drill RD314Spare wheel assembly Standard or foam filledSpecial tools for rock drill
Extra items
*Optional features/components