Mining Tools SANDVIK MGT - Air Service srl · Mining Tools. Sandvik Mineral and Ground Engineering...

SA

ND

VIK

MG

T

Sandvik Mineral and Ground Engineering Tools

Product Catalogue

Mining Tools

Sandvik Mineral and Ground EngineeringTools-MGT, is a division of Sandvik Miningand Construction.

The Sandvik-MGT division handles themarketing, production and productdevelopment of tools for soft rock applicationsin mining and construction.

Marketing and sales are carried out by ourown sales companies on all major marketsthroughout the world.

The products are manufactured within ourproduction units in the U.S., South Africa andAustralia according to the highest qualitystandards. (US: ISO9001, South Africa:ISO9002, and Australia: ISO9002).

Sales and production are backed by extensiveresearch and development resources in theparent company as well as in the majorsubsidiaries.

SA

ND

VIK

MG

T

1

Conicals25mm..................p.3-10

30mm.......................p.11-17

35mm......................p.18-20

Radials......................p.21-25

Roadheading& Crushing..............p.26-30

Rotary Drilling.......p.31-41

Drill Steel...............p.42-44

Tip TypeCharts.......................p.45-46

1

Table of Contents

2

3

4

5

6

2

Sandvik Mineral Tool DivisionP.O. Box 639Bristol, VA 24201U.S.A.

Phone:+1 540 645 5411 (Overseas)

+1 800 868 6657 (U.S. and Canada)

Fax:+ 1 540 669 7130 (Overseas)

Toll Free:1 800 220 5224 (U.S. and Canada)

Sandvik Tamrock (Pty.) Ltd.P.O. Box 3423KrugersdorpZA-1743 KenmareSouth Africa

Phone:+27 11 955 3451

Fax:+27 11 955 4026

Sales Phone:+27 13 665 1075

Sales Fax:+27 13 665 1802

Sandvik Australia Pty. Ltd.MGT DivisionP.O. Box 292 CNewcastleN.S.W. 2300Australia

Phone:+61 249 242100

Fax:+61 249 242171

The locations above manufacture MGT

products for worldwide use. Products might

still be available and kept in stock at other

Sandvik facilities in other countries. Please

check with the Sandvik unit closest to you.

US

SA

AU

Land Codes Correspond to production unit that produces each tool.

Conical Tools

Pages........................................3-20

3

Ordering Code Key for Conical Tools:

x x x x - x x x x - x x x xP=Point AttackTools, Standard

Q=Point AttackTools, NarrowNose

T=Trispec PointAttack Tools,Standard

W=TrispecPoint AttackTools, NarrowNose

1=48 Flange

2=52 Flange

3=64 Flange

5=65 Flange

6=54 Flange

7=SpecialFlange

8=50 Flange

9=’One’ Design

A=Internal Clipwith Dimples

J=With Sleeve Clip

K=ø30 withExternal Clip

M=Other Shank,External Clip

Q=990 Type, InternalClip with Dimples

T=ø30, Internal Clipwith 68mm DimpleLocation

A=Standard

D=Deep Groove

F=Finned Design

U=Short Fit Shank

S=Shallow Groove

X=Slim Body Design

R=Long Fit Shank

Shank Diameter Gauge Length TipNumber

CarbideGrade

Ordering Code Key for Holders:

x x x x - x x x x - x x x xB=Holder

3=Dry PointAttack

4=Dry PointAttackwith Base

A=For InternalClip withDimples

B=Straight Bore

K=For Shankø30 withExternal Clip

A=Standard

H=HD Normal Base

I=HD Short Base

W=Special

Bore HoleDiameter

Tool HolderHeight Tool Holder

Attack Angle‘OO’

IndicatesNo Carbide

Used

4

25mm Conical ToolsDrawing

Dimensions(mm)

ø3863.5

ø25.4

Sharp 60° profile tip for increasedpenetration with 2.5mm tip radius.Good for abrasive conditions.

P9AA-2563-12XX US

NP12

NP18

NP24

Sharp 60° profile tip for increasedpenetration. 1.0 mm tip radiusfor trona and potash.

P9AA-2563-18XX US

General use cap worksbest in severe conditions.

P9AA-2563-24XX US

63.5ø38

ø25.4

Sharp 68° nose. 8.3mm tip forincreased penetration in lightcutting conditions.

P9AA-2563-05XX US

NP05

NP13

NP35

NP42

15.4mm tip for severe cuttingconditions.

P9AA-2563-13XX US

Standard 12.1mm tip for mediumcutting conditions.

P9AA-2563-35XX US

8.3mm double angled tip forlight to medium cuttingconditons.

P9AA-2563-42XX US

NP26

Sharp profile tip for increasedpenetration.Good for abrasiveconditions. 90° tip.

P9AA-2563-26XX US

Sharp profile tip for increasedpenetration. 1.0 mm tip radiusfor trona and potash.

P9MS-2563-18XX US

NP18

NP24General use cap worksbest in severe conditions.

P9MS-2563-24XX US

TipGeometry

Descriptionand Features

OrderingCode

Stock/LandCode

US

ø25.4ø38

63.5

Note:For Carbide Tip Dimensions,

see chart on page 45.

NP35

NP42

NP05

NP13

NP35

NP42

25mm Conical Tools


P9AA-2569-12XX US


P9AA-2569-24XX US


P9MS-2563-05XX US

15.4mm tip for severecutting conditions.

P9MS-2563-13XX US

Standard 12.1mm tip formedium cutting conditions.

P9MS-2563-35XX US

8.3mm tip double angled tip forlight to medium cuttingconditions.

P9MS-2563-42XX US

ø25.4ø38

63.5

69.0ø38

ø25.4

NP24


P9AA-2569-35XX US

8.3mm tip double angled tip forlight to medium cuttingconditions.

P9AA-2569-42XX US

69.0ø38

ø25.4

ø25.4ø38

69.0NP12

NP18

NP24


P9MS-2569-12XX US

Sharp 60° profile tip for increasedpenetration. 1.0mm tip radius fortrona and potash.

P9MS-2569-18XX US


P9MS-2569-24XX US

TipGeometry


OrderingCode

Stock/LandCode

NP12


see chart on page 45.5

DrawingDimensions

(mm)

NP24

NP24

NP12

NP42

NP03

6

25mm Conical Tools


P9XJ-2563-05XX US

NP05

NP1315.4mm tip for severecutting conditions.

P9XJ-2563-13XX US


P9XJ-2563-24XX US

Double angled tip forsevere cutting conditions.

P9MS-2569-03XX US

Standard 12.1mm tip formedium cuttingconditions.

P9MS-2569-35XX US

8.3mm double angledtip for light to mediumcutting conditions.

P9MS-2569-42XX US


P7MS-2563-12XX US

NP24General use cap worksbest in severe conditions.

P7MS-2563-24XX US

ø25.4ø38

69.0

ø25.4ø38

63.5

12.1mm double angledtip for severe conditions.

P9XJ-2569-03XX US


P9XJ-2569-24XX US

8.3mm tip double angled tipfor light to medium cuttingconditions.

P9XJ-2569-42XX US

ø25.4ø38

69.0

NP35

NP42

NP03

External clip and internalsleeve for maximum retention

External clip and internalsleeve for maximum retention

ø25.4ø44

63.5

TipGeometry


OrderingCode

Stock/LandCode



DrawingDimensions

(mm)

NP35

NP43

NP43

TipGeometry


OrderingCode

Stock/LandCode

7

25mm Conical Tools

Large cap for abrasive conditionsand reduced risk of incendivesparking from tool body.

Q7MS-2564-43XX US


Q7AA-2563-35XX US

Large cap for abrasive conditionsand reduced risk of incendivesparking from tool body.

Q7AA-2563-43XX US

Standard 16.2mm cap for steelprotection in medium to hardcutting conditions.

P9QA-2563-01XX US

Same as NP12 with a1.0 tip radius for tronaand potash.

P9QA-2563-13XX US

Standard 12.1mm tip formedium cuttingconditions.

P9QA-2563-35XX US

ø25.4ø44

63.5

ø25.4ø44

63.5

12.1mm double angled tip forsevere cutting conditions.

Q7MS-2564-03XX US

Sharp profile tip for increasedpenetration. 1.0 mm tip radiusfor trona and potash.

Q7MS-2564-13XX US


Q7MS-2564-35XX US

Sharp profile tip for increasedpenetration.Good for abrasiveconditions. 90° tip.

Q7MS-2564-42XX US

63.5ø44

ø25.4

63.5

ø35ø25.4

NP03

NP13

NP35

NP42

NP01

NP13

NP35

NP42

8.3mm double angledtip for light to mediumcutting conditions.

P9QA-2563-42XX US



DrawingDimensions

(mm)

7

NP12

NP24

NP42

TipGeometry


OrderingCode

Stock/LandCode

25mm Conical Tools

8.3mm double angled tip forlight to medium cuttingconditions.

P9MF-2563-42XX US


P9MF-2563-12XX US

General use cap works best insevere conditions.

P9MF-2563-24XX US

Same as NP12 with 90° tip. P9MF-2563-26XX US

Standard 12.1mm tip for mediumcutting conditions.

Q7MF-2563-35XX US

P9MF-2569-12XX

P9MF-2569-24XX


P9MF-2569-42XX US

ø25.4 ø38

63.5

NP26

NP42

ø38

69.5

ø25.4

NP35

8Note:

For Carbide Tip Dimensions,see chart on page 45.


US


US

NP12

NP24

P9AF-2569-12XX

P9AF-2569-24XX


P9AF-2569-42XX US

NP42


US


US

NP12

NP24

DrawingDimensions

(mm)

ø25.4ø38

69.0

ø25.4ø44

63.5

TipGeometry


OrderingCode

Stock/LandCode

25mm Conical Tools

15mm cap for steel bodyprotection used in mediumcutting to protect steel.

Q7MS-2562-36XX AU

Similar to NP01, 16.2mm cap forsteel body protection used inmedium to hard cutting.

Q7MS-2563-44XXQ7MS-2565-44XX

AU

Large 20mm based low energycap for maximum bodyprotection and cuttingperformance in all conditions.

Q7MS-2563-46XXQ7MS-2575-46XX

AU


Q7MF-2569-12XX US


Q7MF-2569-24XX US


Q7MF-2569-35XX US

8.3mm double angled tip for lightto medium cutting conditions.

Q7MF-2569-42XX US

NP12

NP24

NP35

NP42

NP36

NP44

NP46

ø25.4ø44

69.5

7.8mm insert for increasedpenetration in light cuttingconditions.

P9QA-2563-02XX AU

10mm insert for general use inmedium cutting conditions.

P9QA-2563-07XX AU

Similar to NP01, 16.2mm cap forsteel body protection used inmedium to hard cutting.

P9QA-2563-44XX AU

Large 20mm based lowenergy cap for maximumbody protection and cuttingperformance in all conditions.

P9QA-2563-46XX AU

NP02

NP07

NP44

NP46

ø25.4

ø4563.0

9Note:


ø25.4ø35

63.0

DrawingDimensions

(mm)

NP02

NP07

TipGeometry


OrderingCode

Stock/LandCode

25mm Conical Tools

7.8mm insert for increasedpenetration in light cuttingconditions.

Q7MS-2561-02XX AU

10mm insert for general use inmedium cutting conditions.

Q7MS-2561-07XX AU


Q7AA-2572-01XX SA

NP01

ø25.4

ø4061.0

67.0ø35

ø25.4

72.4

ø45ø25.4

16mm insert for harder cuttingconditions in hard coal andsandstone.

Q7AA-2572-51XX SA

NP51

8.8mm double angle insert forlight to medium cuttingconditions.

Q9QA-2567-33XX AUNP33


Q7AA-2572-01XX SA

NP01

16mm insert for harder cuttingconditions in hard coal andsandstone.

Q7AA-2572-51XX SA

NP51

10Note:


DrawingDimensions

(mm)

ø25.4

ø4572.4

11

30mm Conical Tools

25 x 28 stepped shank.16mm insert for harder cuttingconditions in hard coal andsandstone.

Q7BA-2872-51XX SA

NP51

22mm insert for severe hardrock conditions.

P1KS-3064-19XX SANP19

NP21

NP49

18mm insert for medium tohard rock conditions.

P1KS-3064-21XX SA

15.5 mm insert for mediumrock conditions, used for cuttinghigher amounts of rock inlongwalls.

Q8TA-3070-49XX AU

25mm insert for most severehard rock conditions wherecarbide fracture occurs.

P2KS-3075-17XX SA

NP17

NP1922mm insert for severe hardrock conditions.

P2KS-3075-19XX SA

TipGeometry


OrderingCode

Stock/LandCode

72.4

ø45ø25.4 ø28.0

25mm x 28mm stepped shank–designed with large 5mm shoulder

radius to be as strong as 30mm shank.

ø48

64.0

ø30.0

ø50

70.0

ø30.0

NP5322mm insert for hard rockconditions.

Q6AA-3073-53XX SA

ø54

73.4

ø30.0

ø30.0

ø52

75.0

NP2118mm insert for medium to hardrock conditions.

P2KS-3075-21XX SA

DrawingDimensions

(mm)



12

30mm Conical Tools

24mm heavy duty cap formedium to hard abrasiveconditions where steel wearand ignitions are problems.

Q6KS-3075-23XX AU

NP23

15.3mm long insert for mediumto hard conditions.

Q2TG-3077-41XX SANP41

NP3212mm insert for mediumcutting conditions.

P8KS-3080-32XX AU

TipGeometry


OrderingCode

Stock/LandCode

NP51

16mm insert for medium toharder cutting conditions inhard coal and sandstone.

Q8AA-3081-51XX SA

ø54.0

75.0

ø30.0

ø30.0

ø52.077.0

ø30.0ø50.0

80.0

ø50.0

81.0

ø30.0

NP5218mm insert for medium to hardrock conditions.

Q8AA-3081-52XX SA



DrawingDimensions

(mm)


see chart on page 45.13

30mm Conical Tools

16mm cap for increasedpenetration in light cuttingconditions–soft coal, trona andpotash.

P8AA-3084-12XX US

NP12

24mm heavy duty cap for mediumto hard conditions where steelwear and ignitions are problems.

P8AA-3084-23XX US

NP23

NP2416mm cap for general use inmedium conditions.

P8AA-3084-24XX US

NP43

Large 20mm based low energycap for steel body protectionand good cutting performancein most conditions.

P8JA-3084-43XX US

TipGeometry


OrderingCode

Stock/LandCode

ø51.0

84.0

ø30.0

NP43


P8AA-3084-43XX US

16mm cap for increasedpenetration in light cuttingconditions–soft coal, trona andpotash.

P8KD-3084-12XX US

NP12

24mm heavy duty cap for mediumto hard conditions where steelwear and ignitions are problems.

P8KD-3084-23XX US

NP23


P8KD-3084-24XX US

NP43


P8KD-3084-43XX US

ø51.0

84.0

ø30.0

NP50

Large 20mm based low energycap for steel body protection andoptimized cutting performancein most conditions. This cap isoptimized for carbide wear.

P8KD-3084-50XX US

84.0

ø51.0

ø30.0

DrawingDimensions

(mm)

14

30mm Conical Tools

16mm cap for increasedpenetration in light cuttingconditions–soft coal, tronaand potash.

Q8AX-3084-12XX US

NP12

TipGeometry


OrderingCode

Stock/LandCode

ø51.0

84.0

ø30.0


Q8AX-3084-24XX US

NP50

Large 22mm based low energycap for steel body protectionand optimized cuttingperformance in most conditions.This cap is optimized for carbidewear and is patented.

Q8AX-3084-50XX US

ø51.0

84.0

ø30.0

NP12


Q8KX-3084-12XX US


Q8KX-3084-24XX US

NP35Standard 12.1mm tip for mediumcutting conditions.

Q8AF-3084-35XX US

NP43


Q8AF-3084-43XX US

ø51.0

84.0

ø30.0


Q8KF-3084-12XX US

NP12


Q8KF-3084-24XX US

NP43


Q8KF-3084-43XX US

ø51.0

84.0

ø30.0



Slender body design promotesincreased penetration and

reduced dust levels.



DrawingDimensions

(mm)

15

30mm Conical Tools

22mm double angled insert forhard cutting conditions.

P8KD-3085-19XX AUNP19

NP32

12mm insert for good penetrationin light to medium cuttingconditions.

Q8JX-3085-32XX AU

NP32


Q8KX-3085-32XX AU

TipGeometry


OrderingCode

Stock/LandCode

Similar to NP01, 16.2mm cap forsteel body protection used inlight to medium cutting conditions.

Q8KD-3085-44XX AU

NP44

Large 24mm based low energycap for maximum body protectionand cutting performance in harderconditions.

Q8KD-3085-45XX AU

NP45

NP46

Large 20mm based low energycap for good body protectionand cutting performance inmedium conditions.

Q8KD-3085-46XX AU

NP4915.5mm insert for medium tohard rock conditions.

Q8KD-3085-49XX AU

ø30.0ø50.0

85.0

ø30.0ø50.0

85.0

ø30.0ø50.0

85.0

ø30.0ø50.0

85.0



DrawingDimensions

(mm)

16

30mm Conical Tools


Q8TA-3089-32XX AU

NP32

TipGeometry


OrderingCode

Stock/LandCode

ø50.0

89.0

ø30.0

NP46

Large 20mm based low energycap for good body protectionand cutting performance inmedium conditions.

Q8TA-3089-46XX AU

NP4915.5mm insert for medium tohard rock conditions.

Q8TA-3089-49XXAU

ø50.0

90.0

ø30.0Large 24mm based low energycap for maxiumum bodyprotection and cuttingperformance in harderconditions.

Q8AA-3085-45XX

Q8AA-3089-45XX

Q8AA-3090-45XX

AU

NP45

18mm insert for medium tohard rock conditions patentedring resists steel weararound insert.

T3KS-3070-21XX SA

NP21

ø30.0

ø64.0

70.0

S30 block system design forcontinuous miners using 30mmtools. Has large base formaximum weld strength. Alsohas large window for easy clipremoval. Available with non-rotating press fit sleeves usingexternal retainer tools orrotating sleeves using internalband style retainer tools. Sleeveshave carburized bores formaximum wear life.

B3GE-3000-5000(Press fit, non-rotating)

B3GF-3000-5000(Rotating sleeve

with external clip)

C4BB-3016-4600(Press fit sleeve)

C4AA-3016-4600(Rotating sleeve)

US--



DrawingDimensions

(mm)

Long shank fit

117.7

50°

99.5

64.8

SA

ND

VIK

133.4

Standard 30mm bore sleeve usesinternal band tools.

Rotating sleeve with external clipretaining sleeve. Also availablewith a 36mm gauge length@ 140 O.A.L.

C3AA-3019-4900

C3AA-3036-4900

AU

AU

17

30mm Conical Sleeves

Through hardened wear sleeveswith anti-rotation “weddingband” side clip and “RR” cliprear retention. This sleeve fitsKennametal 178 block and ourQ8TA-30 picks. Available in 15mmand 35mm gauge lengths.

C3PH-3015-4500

C3PH-3035-4500

AU


OrderingCode

Stock/LandCode

Through hardened wear sleevewith circlip rear retention to suitACS 2021 block and our Q8AA-30 picks, 35mm gauge length.

C3AA-3035-4900 AU

105 & 125

ø45

ø30.3 ø76

81.0

123 REF

ø45 ø30.3 ø82.6

35.5

123 REF

ø45 ø30.3 ø82.6

19

DrawingDimensions

(mm)

A large number of sleeve designs are offered by all units tosuit the specific needs of each customer’s tooling systems.

35mm Conical Tools


P9SA-3580-19XX SA

NP21

NP51

18mm insert for medium tohard rock conditions. Patentedcarbide ring resists steel weararound insert.

T9SA-3580-21XX SA

16mm insert for medium toharder cutting conditions inhard coal and sandstone.

Q7AA-3585-51XX SA

TipGeometry


OrderingCode

Stock/LandCode

NP56

Large 29mm based lowenergy cap for maximumbody protection and cuttingperformance in hardestrock conditions.

Q7JA-3589-56XX US

NP49

15.5mm insert for medium tohard rock conditions. Patentedcarbide ring resists steel weararound insert.

Q6JA-3500-49XX AU

NP19

NP21

ø35.0

ø64 .0 79.5

ø35.0ø55 .0 85.0

NP52

ø35.0ø55 .0

89.0

System 35 tool has patented labyrinth designfor maximum shank support and improved

rotation in severe cutting conditions.18mm insert for medium to hardrock conditions.

P9SA-3580-21XX SA

System 35 tool has patented labyrinth designfor maximum shank support and improved

rotation in severe cutting conditions.

ø35.0

ø64 .0 79.5

18mm insert for medium tohard rock conditions.

Q7AA-3585-52XX SA

18Note:


DrawingDimensions

(mm)

89.0ø54.0

ø35.0

Trispec tool

35mm Conical Tools

24mm heavy duty cap for mediumto hard abrasive conditionswhere steel wear and ignitionsare problems.

Q7JA-3502-23XX US

NP23

Q7AR-3502-23XX US

NP43


Q7AX-3502-43XX US

TipGeometry


OrderingCode

Stock/LandCode

NP21

18mm insert for medium tohard rock conditions, used forcutting higher amounts of rockin longwalls.

Q6JA-3580-21XX AU

NP50

ø35.0ø55 .0

102.0

NP23

ø35.0ø55.0

102.0

ø35.0ø55.0

102.0

NP50

Large 22mm based low energycap for steel body protectionand optimized cuttingperformance in most conditions.This cap is optimized for carbidewear and is patented.

Q7JA-3502-50XX US

24mm heavy duty cap formedium to hard conditionswhere steel wear and ignitionsare problems.

Large 22mm based low energycap for steel body protectionand optimized cuttingperformance in most conditions.This cap is optimized forcarbide wear.

Q7AX-3502-50XX US

19Note:




Q7AX-3502-23XX US

NP23

24mm heavy duty cap formedium to hard abrasiveconditions where steel wear andignitions are problems.

80.0ø54.0

ø35.0

19

DrawingDimensions

(mm)

35mm Conical ToolsDrawing

Dimensions(mm)


Q6JA-3590-23XX AU

NP23

35mm non-rotating sleeve/block system. For use with toolshaving internal band or sleeveretainers. Notched sleeve/block design prevents sleeverotation in block bore. Blockbore induction hardened toimprove block life. Can berotating also.

B3GE-3525-4500(Non-press fit, non rotating)

C3AA-3534-4900(Mating sleeve,pictured in drawing)

US

US

TipGeometry


OrderingCode

Stock/LandCode


Q6JA-3500-23XX AU

NP23

Large 29mm based low energycap for maximum bodyprotection and cuttingperformance in hardestrock conditions.

Q3XA-4389-56XX US

90.0ø54.0

ø35.0

15.5mm insert for mediumto hard rock conditions.

Q6JA-3500-49XX AUNP49

100.0ø54.0

ø35.0

ø35.0 ø43.3

ø63.588.9

112.6

45°

ø35.1

12

5.2

Shank specially designed for powerfullongwall shears in severe cutting

conditions to resist shank breakage.

--

122 REF

ø45 ø35.1 ø82.6

ø34*

Standard 35mm bore sleeve usesinternal band tools.

Rotating sleeve with external clipretaining sleeve.

* Also available with 20mm and 45mm gauge length.

C3AA-3520-4900

C3AA-3534-4900

C3AA-3545-4900

US--

--

--

20Note:


NP56

NP23

24mm heavy duty cap formedium to hard conditionswhere steel wear and ignitionsare problems. Comes in 102 mmgage length.

Q3XA-4302-23XX US

Ordering Code Key for Radial Tools:

x x x x - x x x x - x x x xR=Radial Tools

1=One Tip,Radial

3=One Tip,Point Attack

A=Rap Lock

F=HS Type,Locking Bolt

W=Tap Lock

N=Rib Lock

H=Swifsure Lock

P=Pin or Dowel

B=Bottom Lock

D=Bayonet

R=Master Lock(Patented)

A=Standard

X=Special Cross

SectionWidth

GaugeLength

TipNumber

CarbideGrade

Radial Tools

Pages........................................21-25

21

US

US

Carbide TipGeometry


OrderingCode

Stock/Land Code

NR38

12.7 x 26.0 shank.Rake angle +5°.General purposeundercutter.

R1FA-1345-38XX US

16.0 x 28.7 shank.Rake angle +5°.Rap lock retentionsystem. Generalpurpose undercutter.

R1AA-1647-38XX US

19.4 x 31.9 shank.Rake angle +5°.Rap lock retentionsystem. Generalpurpose undercutter.

R1AA-1950-09XX

NR41

19.1 x 31.8 shank.Rake angle +10°.Dual pin retentionsystem. Generalpurpose radial.

R1HD-1963-41XX

Radial Tools

45.8

26.0

47.6

28.7

SRT

s

31.9

50.0

31.8

63.5

22Note:


NR38

NR09

DrawingDimensions

(mm)

US

US

US

OrderingCode

Stock/Land Code

Radial Tools

SRTMADE IN USA

41.3

58.8

63.0

42.0

75.8

43.0

25.6 x 41.3 shank.Rake angle +5°.Button retentionsystem. Radial usedin trona and potash.

R1BA-2558-47XX US

NR04

25.8 x 41.3 shank.Rake angle 0°.Pin and rubberretention system.General purposeradial.

R1DA-2575-04XX

25.8 x 41.3 shank.Rake angle 0°.Pin retentionsystem. Generalpurpose radial.

R1PF-2575-04XX

NR18

25.5 X 42 shank.Rake angle +15°.Pin and rubberretention system.Used in potashmining.

R1DA-2563-18XX

Carbide TipGeometry


NR47

78.0

41.3 NR04

23Note:


DrawingDimensions

(mm)

Carbide TipGeometry


OrderingCode

Stock/Land Code

NR22

30.0 x 50.0 shank.Rake angle -5°.Rock. Rib-lockretention system.Radial longwall bit.

R1NA-3000-22XX US

NR25

30.0 x 50.0 shank.Rake angle -5°.Coal. Rib-lockretention system.Radial longwall bit.

R1NA-3000-25XX US

30.0 x 50.0 holder forR1NA bits. Carburized formaximum life. Built inspray for tip cooling.85 mmwide/Rib-lockretention for longwalland continuous miners.

B5NA-3005-90XX US

Radial Tools

100.6

50.0

SRT

105

30

142

1/4” BSP

SRT

50.0

69.9

NR22

30.0 x 50.0 shank. Rakeangle -5°. Coal. Rib-lockretention system. Radialused on continuousminers.

R1NA-3070-22XX US

24Note:


DrawingDimensions

(mm)

100.6

50.0

SRT

--

Carbide TipGeometry


OrderingCode

Stock/Land Code

Radial Tools

NR25

35 x 55 shank. Rakeangle +5°. Rubber/steelpin retention system.High performancelongwall radial forcoal cutting.Patented flared/radial design.

R1RP-3510-25XX US

36 x 56 holder for“R1RP” bits.Carburized formaximum life.Built in spray fortip cooling.80mm width.

B5RK-3585-90XX US

110

55

140

56

1.4” BSP

85

NR20

35 x 55 shank. Rakeangle +5°. Rubber andsteel pin retentionsystem. Highperformance longwallradial for hard cuttingconditions. Patentedflared/radial design.

R1RP-3510-20XX US110

55

25Note:


DrawingDimensions

(mm)

--

Roadheading& Crushers

Pages........................................26-30

Ordering Code Key for Roadheading & Crushers:

x x x x - x x x x - x x x xP=Point AttackTools, Standard

Q=Point AttackTools, NarrowNose

T=Trispec PointAttack Tools,Standard

W=TrispecPoint AttackTools, NarrowNose

1=48 Flange

2=52 Flange

3=64 Flange

5=65 Flange

6=54 Flange

7=SpecialFlange

8=50 Flange

9=’One’ Design

A=Internal Clipwith Dimples

J=With Sleeve Clip

K=ø30 withExternal Clip

M=Other Shank,External Clip

Q=990 Type, InternalClip with Dimples

T=ø30, Internal Clipwith 68mm DimpleLocation

A=Standard

D=Deep Groove

F=Finned Design

U=Short Fit Shank

S=Shallow Groove

Shank Diameter Gauge Length TipNumber

CarbideGrade

Ordering Code Key for Holders:

x x x x - x x x x - x x x xB=Holder

3=Dry PointAttack

4=Dry PointAttackwith Base

A=For InternalClip withDimples

B=Straight Bore

K=For Shankø30 withExternal Clip

A=Standard

H=HD Normal Base

I=HD Short Base

W=Special

Bore HoleDiameter

Tool HolderHeight Tool Holder

Attack Angle‘OO’

IndicatesNo Carbide

Used

26

27

Roadheading & Crushers


P5KS-3075-19XX AU

NP43

Large 20mm based low energycap for steel body protection andgood cutting performance inmost conditions.

Q2DS-3877-43XX SA

Q1EC-3897-43XX

Q1EC-3876-43XX

US

US

TipGeometry


OrderingCode

Stock/LandCode

NP19

NP21

22mm insert for severe hard rockconditions.

18mm insert for medium to hardrock conditions.

Q2VA-3877-19XX

Q2VA-3877-21XX

SA

SA

NP19

NP43

Used on Voest Alpine Minersin salt and potash.

ø30

ø65 75.0

Used on Voest Alpine Minersin salt and potash.

Large 20mm based low energycap for steel body protection andgood cutting performance inmost conditions.

ø30.0 ø38.0ø48

97.4

ø30.0 ø38.077.0ø52



DrawingDimensions

(mm)

ø30.0 ø38.0

75.0ø52.0

For use on a5200 road header.

28

Roadheading & CrushersTip

GeometryDescriptionand Features

OrderingCode

Stock/LandCode

NP15

20mm carbide insert with 75° tipangle.

Large carbide provides extendedtool life.

PODS-3888-16XX

PODS-3864-16XX

US

US

63 or 68

ø38.0ø51

ø30.0

NP08

NP21

NP23

Standard ø18mm insert for roadheading.

Extra long ø18mm insert forlonger bit life.

Heavy duty cap allows maximumtool life in abrasive conditionswhere steel body wear is a problem.

P8DS-3863-08XX

P8DS-3868-21XX

P8DS-3863-23XX

US

US

US

ø30.0

ø38.0ø50

89.0

NP21

18mm insert for medium to hardrock conditions.

18mm insert for medium tohard rock conditions. “P3DS”indicates ø63mm collardimension.

P8DS-3889-21XX

P3DS-3888-21XX

AU

US

ø30.0ø38.0

ø63

89.0 NP21

NP23

NP56

Extra long ø18mm insert forlonger bit life. Also available in76 and 88mm gauge lengths.

Heavy duty cap allows longer toollife in abrasive conditions wheresteel body wear is a problem.

Extra heavy duty cap allows longertool life in abrasive conditionswhere steel body wear is a problem.

P3DS-3868-21XX

Q3DS-3863-23XX

P3DS-3870-56XX

US

US

US



DrawingDimensions

(mm)

ø30.0

ø38.0

162

64 & 88 GAUGE

29

Roadheading & Crushers

25mm insert for most severe hardrock conditions.

P4XS-3877-17XX SA

NP19


P7JU-3870-19XX AU

Q7AG-3870-17XX

Q7AG-3870-19XX

SA

SA

TipGeometry


OrderingCode

Stock/LandCode



Q7AW-3870-17XX

Q7AW-3870-19XX

SA

SA

NP17

NP17

NP19

Large 38mm shank used onAM105 Voest Alpine miners.



Large body and carbideused on surface miners.

ø58

ø30.0

70.0

Large 38mm shank used onAM105 Voest Alpine miners.

ø38.0

ø5870.0

ø38.0

ø5870.0

Large 38mm shank used onAM105 Voest Alpine miners. Has carbideend plug to actuate Voest Alpine sprays.

NP17

NP19



DrawingDimensions

(mm)

ø30.0ø38.0

ø70 75.0

30

Roadheading & CrushersTip


OrderingCode

Stock/LandCode

NP21

NP13

18mm carbide insert used onspecial crushing tool with snapring/circlip retainer.

15.5mm carbide insert used onspecial crushing tool with springloaded pin retainer.

POMS-5105-21XX

POMX-5105-13XX

AU

US

NP21

18mm carbide insert used onspecial crushing tool with snapring/circlip retainer.

Q9MX-5101-21XX AU

“POMS”

“POMX”

205

ø51

ø50.6

ø90

101



DrawingDimensions

(mm)

Rotary Tools

Pages........................................31-41

31

Ordering Code Key for Rotary Tools:

x x x x - x x x x - x x x xD=Rotary Drill Bit

E=Reamer

2=Two TipsPositive3=Two TipsNeutral4=Two TipsNegative5=Three TipsPositive6=Three TipsNeutral7=Three TipsNegative9=One TipNeutral0=Special

F=Metric ThreadFemaleH=Oval Shank(figure 8)J=Pin DriveK=Squre ShankMale, DryM=Metric ThreadMaleQ=RD Rope ThreadMaleR=RD Rope ThreadFemaleS=Square ShankMale, WetT=Hex DriveFemale, DryRound BodyW=Whitworth ThreadMale

A=Dry

B=Centre Flush

C=Flush per Tip

D=Tri Flush

G=Deeper Tip

J=Standard

Cutting DiameterNR Tip

NumberCarbideGrade

D 1st Digit=Shank or ThreadDiameter

E 1st Digit=Bore or ThreadInternalDiameter

Rotary Tools

ø26mm

ø27mm

ø28mm

ø29mm

ø30mm

TipGeometry


OrderingCode

Stock/LandCode

ND26

Two pronged bit with 2.5°negative rake male M16 threads.

D4MB-1626-26XX

D4MB-1627-26XX

D4MB-1628-26XX

D4MB-1629-26XX

D4MB-1630-26XX

AU

AU

AU

AU

AU

ND97 D2MB-1627-97XX AU

Two pronged bit with 7°positive rake male M16 threads.

Good for softer conditionsand faster drilling.

Two pronged bit withnegative rake male whitworth threads .

ø27mm

ø28mm

ø29mm

ND27

D4WB-1327-27XX

D4WB-1328-27XX

D4MB-1329-27XX

AU

AU

AU

ø27 - ø29

1/2”WHITWORTH

ø27mm

SAND

VIK

M16

ø26 - ø30

32Note:


DrawingDimensions

(mm)

SANDVIK

M16

ø27

Rotary ToolsTip


OrderingCode

Stock/LandCode

ø52mm / RHR20F threads





ND32

D4RB-2052-32XX

D4RB-2055-32XX

D4RB-2252-32XX

D4RB-2255-32XX

D4RB-2552-32XX

AU

AU

AU

AU

AU

Two winged bit with 3°negative rake angle.

ø52 or ø55

RHR 20,

22 or 25mm

INTERNAL

ROPE

THREADS

ø40mm

ø41mm

ø42mm

ø43mm

ø45mm

ND91

Two pronged bit with 3°negative rake angle male M16 threads.

D4MB-1640-91XX

D4MB-1641-91XX

D4MB-1642-91XX

D4MB-1643-91XX

D4MB-1645-91XX

AU

AU

AU

AU

AU

ø32mm

ø35mm

ø38mm

ø35mm

ø38mmND09

D4MB-1632-09XX

D4MB-1635-09XX

D4MB-1638-09XX

D2MB-1635-09XX

D2MB-1638-09XX

AU

AU

AU

AU

AUM16

ø32 - ø38SA

NDVI

K

ø40 - ø45

M16

33Note:


DrawingDimensions

(mm)

ø26mm

ø28mm

ND28

D9MB-1626-28XX

D9MB-1628-28XX

AU

AU

Male M16 threaded roof bitwith drop center carbide.

Carbide design allows for faster drilling,generally stronger than a two winged bit.

M16

SANDV

IK

ø26 - ø28

Rotary ToolsTip


OrderingCode

Stock/LandCode

ø27mm

ND11

D9MD-1627-11XX AU


High strength shank shows goodresistance to wear and impact.

ø26

M16

SANDV

IK

ND08SHOWN


Carbide design allows for faster drillinggenerally stronger than a two winged bit.

ø27mm

ø27mm, same asND08 but 2.2mm taller.

ND08

ND11

D9MB-1627-08XX

D9MB-1627-11XX

AU

AU

ø27

M16

34Note:


DrawingDimensions

(mm)

Rotary ToolsTip


OrderingCode

Stock/LandCode

ø27mm

ø28mm

ø29mmND29

D9MB-1627-29XX

D9MB-1628-29XX

D9MB-1629-29XX

AU

AU

AU

ø27mm

ND10

D9MB-1627-10XX AU


Carbide design allows for faster drillinggenerally stronger than a two winged bit.

M16

SAND

VIK

ø27

Male M16 threaded roof bitwith apexed carbide.

High strength shank shows good resistanceto wear and impact. Center flushing hole.

M16

SAND

VIK

ø27 - ø28

Male M16 threaded roof bitwith apexed carbide.

High strength shank shows goodresistance to wear and impact.

ø27 - ø29

M16

ND08SHOWN

ø27mm

ø28mm

ø28mm22.5° cutting angle and

larger 8mm flushing hole

ND98

ND35

D9MB-1627-98XX

D9MB-1628-98XX

D9MB-1628-35XX

AU

AU

AU

35Note:


DrawingDimensions

(mm)

ø35mm

ø38mmND28

D9MB-1635-28XX

D9MB-1638-28XX

AU

AU


Large body with center flushing holeand modified spade.

Rotary ToolsTip


OrderingCode

Stock/LandCode

Male M16 threaded roof bit.

Large body with center flushing holeand modified spade pictured.

ø40mmdrop center carbide

ø40mmstandard apexed carbide

ND30

ND74

D9MB-1640-30XX

9MB-1640-74XX

AU

AU

M16

SAND

VIK

ø35 - ø38

SAND

VIK

M16

ø40

36Note:


DrawingDimensions

(mm)

Rotary ToolsTip


OrderingCode

Stock/LandCode

ø26mmUsed in all conditions.

ND16

D9SJ-1226-16XX US

ø25mm

ø25mmContinuous curve carbide is very

tough and fracture resistant.

ND15

ND71

D9HJ-1325-15XX

D9HJ-1325-71XX

US

US

ø25mm for all conditions.(tip is 4.6mm thick)

ø25mm for hard abrasive roof.(tip is 5.6mm thick)

ø25mm for hard conditions.Continuous curve carbide is

very tough and fracture resistant.

ND15

ND18

ND71

D9SJ-1225-15XX

D9SJ-1225-18XX

D9SJ-1225-71XX

US

US

US

12mm square drive for dry drilling.

10mm x 12mm oval drive for wet drillingused in all conditions.

12mm square drive for dry drilling.

ø25

SRT

ø26

SRT

ø25

302

37Note:


DrawingDimensions

(mm)

ø35mmused in hard conditions.

Continuous curve carbideis very tough and fracture

resistant.

ø35mmused in all conditions.

ND83

ND85

D9SJ-2235-85XX

D9SJ-2235-83XX

US

US12mm square drive for wet drilling.

Rotary ToolsTip


OrderingCode

Stock/LandCode

ø26mmused in all conditions.ND16 D9HJ-1326-16XX US

10mm x 12mm oval drive forwet drilling.

12mm square drive for wet drilling.

ø38mmused in all conditions.ND94 D9SJ-1238-94XX US

ø35

329

ø38

38Note:


DrawingDimensions

(mm)

ø26

302

Rotary ToolsTip


OrderingCode

Stock/LandCode

Standard bit for most conditions.16mm (5/8”) internal hex with

LARGE dust port allowshigh penetration rates.

Standard bit for most conditions.16mm (5/8”) internal hex withSTANDARD dust port works

best in laminated top.ND16

D9TJ-1626-16XX

D9TG-1626-16XX

US

US

Patented bit design forhard top conditions.

16mm (5/8”) internal hex withlarge dust port allows high

penetration rates.Continuous curve carbide

is very tough andfracture resistant.ND71 D9TJ-1625-71XX US

Standard bitfor most conditions.

16mm (5/8”) internal hexwith LARGE dust port allows

high penetration rates.

Standard bitfor most conditions.

16mm (5/8”) internal hexwith STANDARD dust port

works best in laminated top.

ND15

D9TJ-1625-15XX

D9TG-1625-15XX

US

USVacuum system

Dry cuttingHex Drive

ø25

ø25

Vacuum systemDry cuttingHex Drive


ø26

39Note:


DrawingDimensions

(mm)

Patented bit design for hard topconditions. 22mm (7/8”) internal

hex. Continuous curvecarbide is very tough and

fracture resistant.

ND83

D9TJ-2235-83XX US

Rotary ToolsTip


OrderingCode

Stock/LandCode

Standard design forincinsistent top conditions.22mm (7/8”) internal hex.

ND85

D9TG-2235-85XX US

Standard designfor all conditions.

22mm (7/8”) internal hex.

ND94

D9TJ-2238-94XX US


ø35


ø35


ø38

40Note:


DrawingDimensions

(mm)

Rotary ToolsTip


OrderingCode

Stock/LandCode

ø40mm

ø45mm

ø55mm

ND81

ND78

ND09

EOTA-2240-81XX

EOTA-2245-78XX

EOTA-2255-09XX

AU

AU

AU

ø64mmRHR20F threads





ND09

E5RC-2064-09XX

E5RC-2252-09XX

E5RC-2264-09XX

E5RC-2552-09XX

E5RC-2555-09XX

AU

AU

AU

AU

AU

5° positive rake and three flushing holes.Three winged reamer bit.

All sizes have neutral rakeand central flushing.

Five winged reamer bit with22mm female hex.

ø45

40

5 TIPS

22mmINT. HEX

41Note:


ø52 - ø64

DrawingDimensions

(mm)

42

Drill Steel

Pages........................................42-44

Sandvik has a complete line of

center vacuum drill steel for U.S.

manufactured roof bits. Contact U.S.

production unit for details.

43

Drill Steel

22 Hex Drill SteelThese rods are manufactured from premium quality Swedish alloy hollow drill steel.Typical drive end is 25mm square drive and typical bit end is M16 female (as pictured).Other drive ends are available to suit the common roof drilling rigs currently in operation.Bit ends such as 1/2” BSW female and 13mm hex female are also available.

22/7/LENGTH/6(pictured)

AU


OrderingCode

Stock/LandCode

LENGTH(mm)

22 Round Drill SteelNew generation drilling rods manufactured from heat treated chrome moly seamlesstubing. Has a larger flushing hole and smaller rotating diameter to give increasedclearance during drilling. Typical drive end is 25mm square drive and typical bit end isM16 female (as pictured). A limited number of other drive ends are available.

22R/7/LENGTH/6(pictured)

AU

LENGTH(mm)

RR 20MF Extension Drill RodNew generation extension drilling rods manufactured from heat treated chrome molyseamless tubing. System encompasses drive adaptor, MF rods (pictured), inline reamerand reamer adaptor (optional) and bit adaptor (optional). Typical hole size 47 to 55mmwithout the use of a bit adaptor and down to 27mm with the use of a bit adaptor.

RR20MF/LENGTH(pictured)

AU

LENGTH(mm)

44

Drill Steel

RR 18 DD Extension Drill RodPatented direct drive drilling method. No need to uncouple joints to add rods to the drillstring. Manufactured from heat treated chrome moly seamless tubing. Systemencompasses chuck adaptor (optional) MF-DD rods (pictured), inline reamer (optional)and bit adaptor. Typical hole size 27 to 45mm.

RR18DD/LENGTH(pictured)

AU


OrderingCode

Stock/LandCode

LENGTH(mm)

RR 22 DD Extension Drill RodPatented direct drive drilling method. No need to uncouple joints to add rods to the drillstring. System encompasses chuck adaptor (optional) and MF-DD rods (pictured). Typicalhole size 47 to 64mm.

RR22DD/LENGTH(pictured)

AU

HR 18 MF Extension Drill RodThese rods are manufactured from premium quality Swedish alloy hollow drill steel.The system encompasses a drive adaptor, MF rods (pictured), an in-line reamer (optional)and bit adaptor. Typical hole size 28 to 38mm.

HR18MF/LENGTH(pictured)

AU

LENGTH(mm)

LENGTH(mm)

RR 22 MF Extension Drill RodSystem encompasses drive adaptor, MF rods (pictured) and bit adaptor (optional). Thetypical hole size is 47 to 64mm without the use of a bit adaptor and down to 38mm withthe use of a bit adaptor.

RR22MF/LENGTH(pictured)

AU

LENGTH(mm)

NON-RETURN WATER FLUSHING VALVE

NON-RETURN WATER FLUSHING VALVE

NP 32

NP 30

45

Cemented Carbide Tip ChartContinuous Mining

ø16.3

16.4

ø7.8

16.6

ø16.2

19.5

ø8.3

17.0

ø15.5

26.5

ø22.0

26.95

ø29.0

34.5

14.0

ø7.0 ø9.9

18.0 21.5

ø17.3

19.5

ø16.2

23.1

ø15.3 ø12.1

26.4

ø24.0

25.5

ø25.2

25.4

ø14.95

12.0

ø30.0

38.0

ø15.3

26.2

17.5

ø8.3

ø22.0

35.0

ø22.0

26.5

ø12.1

22.2

ø8.75

17.2

ø22.0

26.5

ø12.0

16.0

NP 01 NP 02 NP 03 NP 04 NP 11

NP 12 NP 13 NP 14

NP 21 NP 22 NP 23 NP 24

28.8

ø18.0 ø16.3

16.6

NP 36 NP 40 NP 41

NP 49

NP 50 NP 51

38.0

ø25.7

NP 05 NP 07

NP 17 NP 18 NP 19

NP 26

ø16.0

19.0

NP 33

ø12.1

20.0

NP 35

NP 42 NP 43

24.0

ø20.0

NP 44

ø16.3

16.4

NP 45

23.6

ø24.0

NP 46

20.7

ø20.0

NP 52 NP 53 NP 54 NP 56

ø18.6

30.0

ø16.0

21.5

ø12.1

20.1

26

12.3

26.8

12.3

26.2

18.2

27

11.9

NR 48

NR 38

46

Cemented Carbide Tip Chart Radial and Rotary Drilling

12.7 25.4

19

6

14.7

12.5

ø12.4

30

ø7.8

21.3

21

22.512.8

25

ø15.5

NR 25 NR 26 NR 40 NR 41

NR 46 NR 47 NR 49

15.9

6.7 13.8

30

6 16

11

21

19.1

ND 09 ND11 ND15 ND16 ND17ND 08 ND 10

26

1315.2

26

26

13.2

ND 98ND 97

13

10.5

ND 91

18

15

35.6

15.2

ND 85

14.5

35.6

ND 83

26

12.3

ND 71 15.2

38.7

ND 94

ND 32

25

21.5

36.2

13.9

ND 30

27.2

15.2

ND 29

25

13

ND 28

10.5

13

ND 27ND 26

36.2

13.9

ND 74

9.8

13

18.1

13

18.1

13

28

13.2

ND 35

NR 04

24

21.515.5 9.5

30

20

NR 09

12.7 22

21

NR 18

13

NR 22

20 25.5

26.5

NR 20

25.5

26.5

Notes

47

Notes

48

Sandvik Mining and Construction is the world leadingsupplier of machines and tool systems for all rock,surface and mineral excavation applications. TheSandvik-MGT tool division is developing new hardmaterial alloys in the R&D Centre in Stockholm,Sweden and the new tools (which you can find in thiscatalogue) are designed and tested in the Sandvik-MGT facilities in Australia, South Africa and U.S.A.Sandvik-MGT delivers millions of tools annually foranything from small roadplaning, ice scraping androof drilling bits in all types of coal and soft minerals,up to the biggest tunnelling, trenching and surfacemining tools.

The demand on the tool performance, especially onthe cemented carbide tip material and its resistanceagainst wear and fracturing, becomes more and morecritical as we progress into harder rock and mineralformations. Larger continuous cutting machines arebeing used to replace drill and blast in many tunnellingand construction projects. Thecontinuous process offers lowercosts per ton of excavated materialbut also assures maximum workersafety and has a clear positive effecton the environment.

An extensive research project withVoest Alpine/Eimco and Sandvik-MGThas resulted in a new generation ofcarbide grades and new larger,stronger, more stables and efficientroad headers.

New Cemented CarbideAlloys! The S-Grades!760 S Rock Cut736 S Road Cut732 Mine Cut

This new generation of patentedcarbide grades are manufactured viaa new process technique withcomplete new raw materials, whichhas made it possible for the first timeever to create new extra coarse,super tough alloys with perfectlyuniform grain structure. The creationof this carbide with significantlystronger carbide matrix and a perfect grain sizeconfiguration, has contributed to the superior toughness

SANDVIK CEMENTED CARBIDEand high temperature wear resistance experienced in agreat number of operations and tests and all gradesare now available in a couple of our special andstandard tools. The tool steels have been furtherimproved to match the performance of the new grades.

760-The grade has been proven to be 1.5-3 times betterthan anything else on the market in hard to brutaltunnelling, trenching and coal mining applications.A low cobalt, super coarse carbide.

736-This grade has proven to be up to 2 times betterthan all market standards in road planing and concretecutting. A medium coarse, low cobalt grade withperfect grain configuration.

New Carbide and Tool Geometries.Low Energy Cap Tools.

Many new versions of the Sandvikpatented “low energy” or cap type toolshave been introduced for not only roadplaning and smaller mining tools, butalso for big trenching, roadheading andlongwall applications. The geometrieshave been calculated in CAD programsand simulated with FEM-measurementtechnique, and have seen extensive rigand field testing. All forces and torqueson the tools have been measured,confirming the cutting simulations thusleading to further optimization of tool lifeand lowering the machine loads andreducing incendive sparks and dust.

The Sandvik-MGT range of standardgrades are cost effective in all generalsurface and underground applicationsand meets or exceeds the performanceof the competitive brands available onthe market.

SMC has again intensified the R&Defforts in the field of new alloys and superhard materials (CBN and diamonds);

being respected for being your most innovative toolproducer in the world.

760 STRUCTURE (1200 X)

736 S STRUCTURE (1200 X)

SANDVIK MGTSandvik Mineral and Ground Engineering Tools

Mining Tools SANDVIK MGT - Air Service srl · Mining Tools. Sandvik Mineral and Ground Engineering...

Documents

Transcript of Mining Tools SANDVIK MGT - Air Service srl · Mining Tools. Sandvik Mineral and Ground Engineering...