Technical Specification8-365 S-A2011-04-28

Sandvik DS411Underground Drill Rig

1/4

© 2

011

Sand

vik

Min

ing

and

Con

stru

ctio

n

Sandvik DS411 is a rock reinforcement drill rig thatinstalls all most common rockbolt types in combinationwith steel wire meshes when required.Provided with a strong and reliable boom, the TBR60, itcan install from one carrier setup, several rows of rock-bolts, from 1.5m to 3 meters long.

The extremely short but powerful RD314 rockdrilldelivers the best ratio between rockbolt lenght and driftheight. The rockbolting process is completely mecha-nized and controlled by a single operator from under aFOPS safety canopy.

As all the Sandvik drill rigs based on the NC7 carrierfamily, the Sandvik DS411 is designed for safety.For example, all the daily and routine checks are donewith both feet on ground.

Bolting coverageFrom W=3100mm x H=3100mmW=7600mm x H=8400mm

Boom TBR60

Bolting head BH

Rock drill RD314 R32 Female

Hole diameter 33-51mm

Bolt length From 1.5m to 3m (5’ to 10’)

Control system TPC301 EW

Carrier NC7N

Cornering 4250 mm

Total weight (depending on options)

Around 23000kg

Technical Specification

Sandvik DS4118-365 S-A2011-04-28

2/4

Coverage

C

B

A1920

4325

1200Zoom

200

55°

25°7580

68905400

All dimensions in mm

BoltingHead

BoltLength A B C

BH15 1.2-1.5 3100 6600 7900

BH18 1.2-1.8 3100 6600 7900

BH22 1.5-2.2 3550 6600 7900

BH24 1.5-2.4 3700 7100 8400

BH27 1.5-2.7 4000 7100 8400

BH30 1.5-3.0 4300 7100 8400

CBA

500

500 500 500

Minimum height Optimum height Maximum height

500 500

Rock Drill RD314Percussion power 14 kWPercussion pressure 120 - 160 barPercussion rate 110 HzRotation speed 0...300 rpmRotation torque Max. 505 NmHole size 33 - 51 mmShank adapter R32 Female Weight 115 kgFlushing water pressure

Max. 20 bar

Shank lubrication device Air /oil mist SLUShank lubrication compressor CT10, 1m³/min (7 bar)

Hydraulic rock drill Technical Specification 2-1055

Boom type TBR60

Boom lift55° Up25° Down

Boom swing45° Left45° Right

Boom head tilt35° Up55° Down

Boom head swing23° Left73° Right

Boom extension 1200 mmBolting head 358°*Cylinder rods Harsh water

Boom Technical Specification 8-5540

Bolting head type and feed BH and KS140Bolt caroussel capacity 8 Rockbolts

Bolting head Technical Specification 8-5200

*Bolting alternatives GCR, WI, S, BC*Screen handler On separate boom*Bolting instrumentation TMS D*Automatic resinshooting system

ARI

*Rod retainer (PITO 9H)For temporary long hole drilling with R32 male shank

*Bolt storage (front) Max. 2.4m length*Bolt storage (side)

*Drilling options

*Pressure cleaning system with reel

Max. 15 bar (11 bar additional to mine water network)

*High pressure cleaning system with reel

Max. 180 bar

*Cleaning system

*Greasing unit with pump, reel and nozzle

Manual

*Automatic greasing system Carrier and boom

*Greasing systems and options

*Optional features/components

Technical Specification

Sandvik DS4118-365 S-A2011-04-28

3/4

Machine dimensions

3100

1503040

12040 with Screen handlerAll dimensions in mm

1305

1095011220 with SUB 2i

3175 3965

55°

25°

2740

Optional cementbags platform

Filtration size20 microns (pressure)12 microns (return)

Oil coolerCooling capacity 30kWOW30 water cooling

Drilling oil tank Max. 200 litersTank filling Electric filling pumpPowerpack HPP355 (55kW)Percussion pump 100cc variable displacementRotation pump 33cc gear pump*Biodegradable oils Shell Naturelle HFE68

Hydraulic system

Type TPC301 EW

Power controlAjustable full powerAjustable collaring power

Anti-jamming controlAjustable anti-jamming pressure

Rotation controlAjustable rotation speedReversible rotation

Flushing controlWater flushing pressureAir-mist flushing, option

Returns automatics Rock drill

Control system

*Manual fire suppression system (Ansul)

6 nozzles +1x7,7kg hand held fire extinguisher

*Automatic fire suppression system (Ansul)

6 nozzles +1x7,7kg hand held fire extinguisher

*Hand held fire extinguisher 1x7.7kg

*Fire suppression system and options

Total input power 70 kWMain switch MSE 10Standard voltages 380-690 VACVoltage fluctuation +/- 10%Automatic cable reel TCR3ER with spooling systemCable reel control (in & out) Control at operator station Starting method Star delta*Ground fault and overcurrent protection

VYK

*Electric cable rubber or PUR100 or 150 meterssee spec 5-4100

*Optional voltage 1000 VAC

*Optional outlet

230V outlet 4500VA3-phase outlet, network voltage3-phase outlet max 15kVA, with transformer

*Remote control reel(s) At rear end

Electric system and *options

Flushing WaterWater pump WBP 1 (3 kW)Water pump capacity 50 l/min (Max. 10bar)Inlet pressure 2-7 bar (while drilling)Mine air network connection IP5 air cleaner

*Air mist flushing packagesFor external supply of air and waterFor internal air with CT16

*Bore hole air flushing (level1) Air compressor CT16*Bore hole air flushing (level2)*Bore hole air flushing (level3)*Water hose reel THR 2.5E*Water hose 32mm (1”1/4)

38mm (1”1/2)100 meters65 meters

Flushing system and *options

*Optional features/components

Technical Specification

Sandvik DS4118-365 S-A2011-04-28

4/4Sandvik Mining and Construction OyP.O Box 100. FIN-33311 Tampere, FinlandTel. +358 205 44 121, Fax +358 205 44 120www.sandvik.com

Sandvik Mining and Construction reserves the right to change this specification without further notice.

© 2

011

Sand

vik

Min

ing

and

Con

stru

ctio

n

Tramming dimensions

24552950

15° 13°

5°

30407520

3175

850

1137035°

750

750

F

C

35°

B

A

D

E

750

750

12040 with Screen Handler11590 with SUB 2i

A B C D E F

DS411 3350 6600 4000 3800 6850 3900

DS411 SUB 2i 3350 7600 5000 3800 6850 3900

DS411 SH 3350 6900 4250 3750 7250 4250

11°

10°

420

Tramming speed16 km/h on horizontal14% = 1:7 = 8° 5km/h

Gradeability / Inclination Max. 15° / 5°

Tramming

Safety canopy FOPS (ISO 3449)Controls Drilling and trammingSound pressure level according to EN791

Operator station: 102 dB(A)Emitted: 124 dB(A)

SeatErgonomic, adjustable with seat belt

Operator’s station

Front working lights 4 x 35W HID (24V) Front driving lights 2 x 35W HID (24V) Rear working lights 2 x 35W HID (24V) Rear driving lights 2 x 35W HID (24V) Remote controlled search 1 x 35W HID (24V) Mixer light (if P-System) 1 x 70W (24V)Parking rear brake lights 2 x Red LED*Extra working lights 2 x 35W HID (24V)

Lights

*Harsh water options (level 1) Oil cooler + boom cylinders

*Harsh water options (level 2)Level 1 + steering and jacks cylinders

*Regional AUS, USC, EUR

*AntifreezingBlock heater for engineHydraulic oil tank heaterWater circuit flushing

*Packages

Carrier type Wheel mounted, frame steeringCarrier name NC7N

TransmissionHydrodynamicSpicer T20 000

Axles SpicerTyres 12.00-20Diesel engine MB904LA, Tier III, 110kWExhaust Catalyser + Muffler Standard

Brakes

Service, hydraulic wet disc brakes Parking and emergency SAHR type, fail safewet disc brakes

Ground clearance 420 mmRear oscillation +/- 10°Frame steering +/- 35°Steering Frame steeringFuel tank 150 liters

Hydraulic jacksTJ40 (front telescopic)TJ60 (rear)

*Wheel clocks 2 pieces*Fast filling systems For fuel/complete*Battery jump start*Sealed gel batteries*Foam filled tyres*Basket boom SUB 2i, FOPS Safety canopy

Carrier

Spare rock drill RD314Spare wheel assembly Standard or foam filledSpecial tools for rock drill

Extra items

*Optional features/components