Post on 27-Jan-2021
HANWEL NEDERLAND
flexible leidingen
Swivel joints
Designs are subject to change without notice 12/2004
1
HANWEL is your qualified partner in the field of flexible piping systems. The product range of HANWEL B.V. includes • Swivel Joints • Rotary Joints • Complete prefinished swivel joint systems. Flexible piping systems are used in various industrial sectors, for example.: ���� chemical industry ���� petrochemical industry ���� steel and iron industry ���� food industry ���� paper and wood industry ���� waste water treatment plants, water treatment ���� off-Shore-Industry ���� dredger and crane industry ���� general and special engineering WELFLEX - Swivel joints are used in the following cases:
• movable piping systems are needed for the transport of liquid and gaseous medias
• liquid and gaseous medias must be induced from fixed plant components into rotating plant components
• hose systems must be exculpated from high bending and torsion stresses
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
Designs are subject to change without notice 12/2004
2
Styles
WELFLEX - Swivel joints are available in 8 styles. By the means of capable combinations of the styles nearly any areal movement of a piping system can be realized.
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
Designs are subject to change without notice 12/2004
3
The Welflex programma covers the following type series:
W-Swivel Joint
• welding connection • 2 ball races • radial sealing principle • styles 10 to 31 • DN25 bis DN200
(bigger on request) • up to 420 bar • up to 250° C • materials: St52-3,1.4571 • seal materials: NBR,
Viton, PTFE, PU
LW-Swivel Joint
• welding connection • 1 ball race • radial sealing principle • styles 10 bis 31 • DN25 bis DN200
(bigger on request) • up to 100 bar • up to 250° C • materials: St52-3,1.4571 • seal materials: NBR,
Viton, PTFE, PU
T-Swivel Joint
• internal thread G ½ to G2 • radial
sealing principle • styles 10, 11, 12 • up to 420 bar • up to 250° C • materials: 42CrMo4,
1.4571 • seal materials:
NBR, Viton, PTFE, PU
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
Designs are subject to change without notice 12/2004
4
Special Swivel Joints
LA-Swivel Joint
• welding connection • 3-part cabinet • radial sealing principle • double safety sealing • styles 10 bis 31 • DN25 bis DN150 (bigger on request) • up to 40 bar • up to 250° C • materials: 26CrMo4, 1.4571 • seal materials: NBR, Viton, PTFE, PU • free clearance volume execution by additional axial sealing
• HT-Swivel Joint high temperature application up to 400° C and more • HP-Swivel Joint high pressure application up to 1000 bar • H-Swivel Joint heated swivel joint (double jacket) • HCR-Swivel Joint PTFE-lined swivel joint for aggressive fluids • F-Swivel Joint foodstuff-swivel joint for hygienic applications • SO-Swivel Joint spezial designs according
to the customers’ specific requirements
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
Designs are subject to change without notice 12/2004
5
1
Item Denomination
1 Stator
2 Rotor
5 Back up ring
6 Internal scraper
10 Main seal
11 Dust seal
12 Stopper with hexagon socket
13 Stopfen with internal thread
15 Ball
16 Grease nipple
W-Swivel Joint
Swivel joints made of carbon steel up to working pressure 420 bar
Swivel joints made of stainless steel up to working pressure 100 bar
Materials:
Swivel Joints: St 52-3, 1.4571
Fittings:
St 35.8 I, St 35.8III, St 37-3, St 52-3, 1.4571
All materials with material certificate acc. to EN 10204-3.1B
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
Designs are subject to change without notice 12/2004
6
DN L 1 L 2 L 3 L 4 D
25 295 ± 3 233 ± 4 38 ± 2,5 171 ± 5 ø 87
32 295 ± 3 242,5 ± 4 47,5 ± 2,5 190 ± 5 ø 97
40 295 ± 3 252 ± 4,5 57 ± 3 209 ± 6 ø 97
50 310 ± 3 286 ± 4,5 76 ± 3 262 ± 6 ø 117
65 310 ± 3 305 ± 4,5 95 ± 3 300 ± 6 ø 132
80 312 ± 3 326 ± 4,5 114 ± 3 340 ± 6 ø 152
100 312 ± 4 364 ± 5 152 ± 3 416 ± 6 ø 172
125 331 ± 4 421,5 ± 6 190,5 ± 4 512 ± 8 ø 203
150 331 ± 4 459,5 ± 5 228,5 ± 3 588 ± 6 ø 233
200 354 ± 4 559 ± 6 305 ± 4 764 ± 8 ø 313
W–Swivel Joint (2 ball races)
Swivel joints made of carbon steel up to working pressure 420 bar
Swivel joints made of stainless steel up to working pressure 100 bar
Bows acc. to DIN 2605–2–90°-3S
Materials:
Swivel Joints:
St 52-3, 1.4571
Fittings:
St 35.8 I, St 35.8III, St 37-3, St 52-3, 1.4571
All materials with material certificate acc. to EN 10204-3.1B
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
Designs are subject to change without notice 12/2004 7
DN L 1 L 2 L 3 L 4 D
25 171 ± 3 171 ± 4 78 ± 4 171 ± 5 ø 115
32 175 ± 3 182,5 ± 4 89,5 ± 4 190 ± 5 ø140
40 179 ± 3 194 ± 4,5 101 ± 4,5 209 ± 6 ø 150
50 200 ± 3 231 ± 4,5 123 ± 4,5 262 ± 6 ø 165
65 200 ± 3 250 ± 4,5 142 ± 4,5 300 ± 6 ø 185
80 212 ± 3 276 ± 4,5 166 ± 4,5 340 ± 6 ø 200
100 216 ± 4 316 ± 5 206 ± 5 416 ± 6 ø 220
125 241 ± 4 376,5 ± 6 247,5 ± 6 512 ± 8 ø 250
150 241 ± 4 414,5 ± 5 285,5 ± 5 588 ± 6 ø 285
200 278 ± 4 521 ± 6 369 ± 6 764 ± 8 ø 340
WF–Swivel Joint (2 ball races)
Bows acc. to DIN 2605–2–90°-3S
Welding neck flanges acc. to DIN 2633-PN 16
Materials:
Swivel Joints:
St 52-3, 1.4571
Fittings:
St 35.8 I, St 35.8III, St 37-3, St 52-3, C 22.8, 1.4571
All materials with material certificate acc. to EN 10204-3.1B
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
Designs are subject to change without notice 12/2004 8
DN L 1 L 2 L 3 L 4 D
25 175 ± 3 173 ± 4 80 ± 4 171 ± 5 ø 115
32 179 ± 3 184,5 ± 4 91,5 ± 4 190 ± 5 ø 140
40 185 ± 3 197 ± 4,5 104 ± 4,5 209 ± 6 ø 150
50 206 ± 3 234 ± 4,5 126 ± 4,5 262 ± 6 ø 165
65 214 ± 3 257 ± 4,5 149 ± 4,5 300 ± 6 ø 185
80 228 ± 3 284 ± 4,5 174 ± 4,5 232 ± 6 ø 200
100 242 ± 4 329 ± 5 219 ± 5 416 ± 6 ø 235
125 267 ± 4 389,5 ± 6 260,5 ± 6 512 ± 8 ø 270
150 281 ± 4 434,5 ± 5 305,5 ± 5 588 ± 6 ø 300
200 330 ± 4 547 ± 6 395 ± 6 764 ± 8 ø 375
WF–Swivel Joint (2 Ball races)
Bows acc. to DIN 2605–2–90°-3S
Welding neck flanges acc. to DIN 2635-PN 40
Materials:
Swivel Joints:
St 52-3, 1.4571
Fittings: St 35.8 I, St 35.8III, St 37-3, St 52-3, C 22.8, 1.4571
All materials with material certificate acc. to EN 10204-3.1B
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
Designs are subject to change without notice 12/2004 9
DN L 1 L 2 L 3 L 4 D
025 – G 1“ 153 ± 1,5 148 ± 2,5 83 ± 4 171 ± 5 ø 87
032 – G 11/4“ 164,5 ± 1,5 164 ± 2,5 97,5 ± 4 190 ± 5 ø 97
040 – G 11/2“ 164,5 ± 1,5 173,5 ± 3 107 ± 4,5 209 ± 6 ø 97
050 – G 2“ 190,5 ± 1,5 210,5 ± 3 134 ± 4,5 262 ± 6 ø 117
065 – G 21/2“ 240 ± 3 270 ± 4,5 162 ± 4,5 300 ± 6 ø 132
080 – G 3“ 254 ± 3 297 ± 4,5 187 ± 4,5 340 ± 6 ø 152
100 – G 4“ 278 ± 4 347 ± 5 237 ± 5 416 ± 6 ø 172
125 – G 5“ 315 ± 4 413,5 ± 6 284,5 ± 6 512 ± 8 ø 203
150 – G 6“ 315 ± 4 451,5 ± 5 322,5 ± 5 588 ± 6 ø 233
WS–Swivel Joint (2 ball races)
Bows acc. to DIN 2605–2–90°-3S
sockets acc. to DIN 2986-PN 50
Materials:
Swivel Joints: St 52-3, 1.4571
Fittings: St 35.8 I, St 35.8III, St 37-3, St 52-3, 42CrMo4, 1.4571
All materials with material certificate acc. to EN 10204-3.1B
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
Designs are subject to change without notice 12/2004 10
DN L 1 L 2 L 3 L 4 D
025 – G 1“ 165 ± 3 168 ± 4 75 ± 4 171 ± 5 ø 87
032 – G 11/4“ 171 ± 3 180,5 ± 4 87,5 ± 4 190 ± 5 ø 97
040 – G 11/2“ 171 ± 3 190 ± 4,5 97 ± 4,5 209 ± 6 ø 97
050 – G 2“ 200 ± 3 231 ± 4,5 123 ±4,5 262 ± 6 ø 117
065 – G 21/2“ 220 ± 3 260 ± 4,5 152 ±4,5 300 ± 6 ø 132
080 – G 3“ 232 ± 3 286 ± 4,5 176 ±4,5 340 ± 6 ø 152
100 – G 4“ 252 ± 4 334 ± 5 224 ± 5 416 ± 6 ø 172
125 – G 5“ 301 ± 4 406,5 ± 6 277,5 ± 6 512 ± 8 ø 203
150 – G 6“ 331 ± 4 459,5 ± 5 330,5 ± 5 588 ± 6 ø 233
WN–Swivel Joint (2 ball races)
Bows acc. to DIN 2605–2–90°-3S
Pipe nipples acc. to DIN 2982-PN 50
Materials:
Swivel Joints:
St 52-3, 1.4571
Fittings:
St 35.8 I, St 35.8III, St 37-3, St 52-3, 1.4571
All materials with material certificate acc. to EN 10204-3.1B
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
Designs are subject to change without notice 12/2004 11
Item Denomination
1 Stator
2 Rotor
5 Back Up Ring
6 Internal Scraper
10 Main Seal
11 Dust Seal
12 Stopper with hexagon socket
15 Ball
16 Grease Nipple
LW-Swivel Joint
up to working pressure 40 bar
Materials:
Swivel Joints:
St 52-3, 1.4571
Fittings:
St 35.8 I, St 35.8III, St 37-3, St 52-3, 1.4571
All materials with material certificate acc. to EN 10204-3.1B
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
Designs are subject to change without notice 12/2004 12
DN L 1 L 2 L 3 L 4 D
25 275 ± 3 213 ± 4 38 ± 2,5 151 ± 5 ø 87
32 275 ± 3 222,5 ±
4 47,5 ± 2,5
170 ± 5 ø 97
40 275 ± 3 232 ± 4,5 57 ± 3 189 ± 6 ø 97
50 285 ± 3 261± 4,5 76 ± 3 237 ± 6 ø 117
65 285 ± 3 280 ± 4,5 95 ± 3 275 ± 6 ø 132
80 287 ± 3 301± 4,5 114 ± 3 315 ± 6 ø 152
100 287 ± 4 339 ± 5 152 ± 3 391 ± 6 ø 172
125 296 ± 4 386,5 ± 6 190,5 ± 4 477 ± 8 ø 203
150 296 ± 4 424,5 ±
5 228,5 ± 3 553 ± 6 ø 233
200 314 ± 4 519 ± 6 305 ± 4 724 ± 8 ø 313
LW–Swivel Joint (1 ball race)
Up to working pressure 40 bar
Bows acc. to DIN 2605–2–90°-3S
Materials:
Swivel Joints:
St 52-3, 1.4571
Fittings:
St 35.8 I, St 35.8III, St 37-3, St 52-3, 1.4571
All materials with material certificate acc. to EN 10204-3.1B
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
Designs are subject to change without notice 12/2004 13
DN L 1 L 2 L 3 L 4 D
25 151 ± 3 151 ± 4 78 ± 4 151 ± 5 ø 115
32 155 ± 3 162,5 ± 4 89,5 ± 4 170 ± 5 ø140
40 159 ± 3 174 ± 4,5 101 ± 4,5 189 ± 6 ø 150
50 175 ± 3 206 ± 4,5 123 ± 4,5 237 ± 6 ø 165
65 175 ± 3 225 ± 4,5 142 ± 4,5 275 ± 6 ø 185
80 187 ± 3 251 ± 4,5 166 ± 4,5 315 ± 6 ø 200
100 191 ± 4 291 ± 5 206 ± 5 391 ± 6 ø 220
125 206 ± 4 341,5 ± 6 247,5 ± 6 477 ± 8 ø 250
150 206 ± 4 379,5 ± 5 285,5 ± 5 553 ± 6 ø 285
200 238 ± 4 481 ± 6 369 ± 6 724 ± 8 ø 340
LWF–Swivel Joint (1 ball race)
Bows acc. to DIN 2605–2–90°-3S
Welding Neck Flanges acc. to DIN 2633-PN 16
Materials:
Swivel Joints:
St 52-3, 1.4571
Fittings:
St 35.8 I, St 35.8III, St 37-3, St 52-3, C 22.8, 1.4571
All materials with material certificate acc. to EN 10204-3.1B
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
Designs are subject to change without notice 12/2004 14
DN L 1 L 2 L 3 L 4 D
25 155 ± 3 153 ± 4 80 ± 4 151 ± 5 ø115
32 159 ± 3 164,5 ± 4 91,5 ± 4 170 ± 5 ø140
40 165 ± 3 177 ± 4,5 104 ± 4,5 189 ± 6 ø150
50 181 ± 3 209 ± 4,5 126 ± 4,5 237 ± 6 ø165
65 189 ± 3 232 ± 4,5 149 ± 4,5 275 ± 6 ø185
80 203 ± 3 259 ± 4,5 174 ± 4,5 232 ± 6 ø200
100 217 ± 4 304 ± 5 219 ± 5 391 ± 6 ø235
125 232 ± 4 354,5 ± 6 260,5 ± 6 477 ± 8 ø270
150 246 ± 4 399,5 ±5 305,5 ± 5 553 ± 6 ø300
200 290 ± 4 507 ± 6 395 ± 6 724 ± 8 ø375
LWF–Swivel Joint (1 ball race)
Bows acc. to DIN 2605–2–90°-3S
Welding Neck Flanges acc. to DIN 2635-PN 40
Materials:
Swivel Joints:
St 52-3, 1.4571
Fittings:
St 35.8 I, St 35.8III, St 37-3, St 52-3, C 22.8, 1.4571
All materials with material certificate acc. to EN 10204-3.1B
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
Designs are subject to change without notice 12/2004 15
DN L 1 L 2 L 3 L 4 D
025 – G 1“ 161± 3 156 ± 4 83 ± 4 151 ± 5 ø 87
032 – G 11/4“ 171 ± 3 170,5 ± 4 97,5 ± 4 170 ± 5 ø 97
040 – G 11/2“ 171 ± 3 180 ± 4,5 107 ± 4,5 189 ± 6 ø 97
050 – G 2“ 197 ± 3 217 ± 4,5 134 ± 4,5 237 ± 6 ø 117
065 – G 21/2“ 215 ± 3 245 ± 4,5 162 ± 4,5 275 ± 6 ø 132
080 – G 3“ 229 ± 3 272 ± 4,5 187 ± 4,5 315 ± 6 ø 152
100 – G 4“ 253 ± 4 322 ± 5 237 ± 5 391 ± 6 ø 172
125 – G 5“ 280 ± 4 378,5 ± 6 284,5 ± 6 477 ± 8 ø 203
150 – G 6“ 280 ± 4 416,5 ± 5 322,5 ± 5 553 ± 6 ø 233
LWS–Swivel Joint (1 ball race)
Up working pressure 40 bar
Bows acc. to DIN 2605–2–90°-3S
Sockets acc. to DIN 2986
Materials:
Swivel Joints:
St 52-3, 1.4571
Fittings:
St 35.8 I, St 35.8III, St 37-3, St 52-3, 1.4571
All materials with material certificate acc. to EN 10204-3.1B
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
Designs are subject to change without notice 12/2004 16
DN L 1 L 2 L 3 L 4 D
025 – G 1“ 145 ± 3 148 ± 4 75 ± 4 151 ± 5 ø 87
032 – G 11/4“ 151 ± 3 160,5 ± 4 87,5 ± 4 170 ± 5 ø 97
040 – G 11/2“ 151 ± 3 170 ± 4,5 97 ± 4,5 189 ± 6 ø 97
050 – G 2“ 175 ± 3 206 ± 4,5 123 ± 4,5 237 ± 6 ø 117
065 – G 21/2“ 195 ± 3 235 ± 4,5 152 ± 4,5 275 ± 6 ø 132
080 – G 3“ 207 ± 3 261 ± 4,5 176 ± 4,5 315 ± 6 ø 152
100 – G 4“ 227 ± 4 309 ± 5 224 ± 5 391 ± 6 ø 172
125 – G 5“ 266 ± 4 371,5 ± 6 277,5 ± 6 477 ± 8 ø 203
150 – G 6“ 296 ± 4 424,5 ± 5 330,5 ± 5 553 ± 6 ø 233
LWN–Swivel Joint (1 ball race)
Up to working pressure 40 bar
Bows acc. to DIN 2605–2–90°-3S
Pipe Nipples acc. to DIN 2982
Materials:
Swivel Joints:
St 52-3, 1.4571
Fittings: St 35.8 I, St 35.8III, St 37-3, St 52-3, 1.4571
All materials with material certificate acc. to EN 10204-3.1B
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
Designs are subject to change without notice 12/2004 17
Item Denomination
1 Stator
2 Rotor
5 Back Up Ring
6 Internal Scraper
10 Main Seal
11 Dust Seal
12 Stopper with hexagon socket
13 Stopper with internal thread
15 Ball
16 Grease Nipple
T-Swivel Joint
Swivel Joints made of carbon steel up to working pressure 420 bar
Swivel Joints made of stainless steel up working pressure 100 bar
Whitworth – Pipe thread acc. to DIN 2999 or NPT
Materials:
Swivel Joints:
42CrMo4, 1.4571
All materials with material certificate acc. to EN 10204-3.1B
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
Designs are subject to change without notice 12/2004 18
DN 8 10 15 20 25 32 40 50
T 1 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"
L 1 100 100 100 100 112 122 122 145
L 2 120 120 120 120 137 172 172 200
L 3 140 140 140 140 162 212 212 245
L 4 18 18 18 18 20 22 23 26
L 5 100 100 100 100 112 137 137 160
L 6 26 26 26 26 33,5 38,5 38,5 45
L 7 40 40 40 40 50 70 70 80
L 8 100 100 100 100 112 142 142 165
D ø73 ø73 ø73 ø73 ø87 ø97 ø97 ø117
SW 55 55 55 55 46 55/60 60 70
T- Swivel Joint (2 ball races)
Swivel Joints made of carbon steel working pressure up to420 bar
Swivel Joints made of stainless steel working pressure up to 100 bar
Whitworth – pipe thread acc. to DIN 2999 or NPT
Materials:
Swivel Joints:
42CrMo4, 1.4571
All materials with material certificate acc. to EN 10204-3.1B
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
Designs are subject to change without notice 12/2004 19
Item Denomination
1 Stator 2 Rotor 3 Cover 4 Packing Sleeve 5 Back Up Ring 9 Cover Seal 10 Main Seal 11 Dust Seal, Secondary Seal 12 Stopper with hexagon socket 13 Stopper with internal thread 16 Grease Nipple 18 Socket Head Screw 19 Plastic Stopper
LA-Swivel Joint
Swivel Joints up to 40 bar
3-part cabinet
Double safety sealing (radial)
Materials:
Swivel Joints:
Medium touched 1.4571 complete 1.4571 26CrMo4
All materials with material certificate acc. to EN 10204-3.1B
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
Designs are subject to change without notice 12/2004 20
Rotary Joints Rotary Joints are used when several medias, liquid and/or gaseous, must be fed into a rotating plant component at the same time. By the means of an applicable choice of materials rotary joints can be used for nearly all tasks. Typical applications are for example • Converter-rotary joints • Hydraulic-rotary joints in dredgers and cranes
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
Designs are subject to change without notice 12/2004 21
As a result of the variety of the customers’ specific demands the design and manufacturing is carried out in close collaboration with the customer. A rotary joint is always a problem solution specific to the customer.
Technical parameters
number of channels acc. to the customers requirements size of the channels acc. to the customers requirements connections acc. to the customers requirements working pressure vacuum up to app. 1000 bar working temperature -60°C up to +250°C rotational speed > 1000 min-1 materials 42CrMo4, St52-3, 1.4301, 1.4541,
1.4571 (others on request) seals PTFE, Viton, Perbunan, PU
Hanwel B.V. Jan Tinbergenstraat 209 NL-7559 SP Hengelo Tel. : +31 74 - 2650000verkoop@hanwel.com www.hanwel.com
f exible leidingenafsluitersophang- en oplegsystemen
From the point of enquiry till after sales services you wil be in contact with the same contact person. This is how we get to know you and your company. Your Hanwel contact person will arrange that your questions, enquiries and orders will handled quick and correct.
Our service:
Customer support:• Personal contact• Over 40 years of experience• Skilled personnel• Extended technical information available• Reliable partner• One contact person from quotation till after sales service• Personal advise
Knowledge:• Specialists per product group• High expertise• Project supervision• Training and advise • Knowledge of applications and cost savings
Service centre:• Product specialists• Daily shipments• Large stock• Rush deliveries • Site inspections• Own equipment for pre-tensioning of spring hangers
Quality and environment:• Continuously investing in quality• Certified according ISO 9001• Code of conduct• Certified suppliers
Hanwel service
No.: NL7000110
Hanwel B.V.Jan Tinbergenstraat 2097559 SP Hengelo ovNederlandTel.: +31 (0) 74 265 00 00Fax: +31 (0) 74 265 00 01Email: verkoop@hanwel.com
www.hanwel.com