Mmcx connector series

Cable Connectors

PCB Connectors

MMCX CONNECTORS

... A Vital Part of Connection World

CMPTER

Assembly Instructions

Mounting Holes

MMCX Series Coaxial Connectors

#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, ChinaTel : +86-511-8443 6131 Fax : +86-511-8502 5485 Website: www.cmpter.com Email : sales@cmpter.com

CMPTER

DESCRIPTION

CONTENTS

Description ..............................................................................

Technical data ...........................................................................Interface dimensions ....................................................................

Cable connectors .......................................................................PCB Connectors ........................................................................

MMCX Connectors are 45% smaller than the SMB, Developed during the 1990s, is one of the smallest and Micro-miniature RF coaxial connectors. MMCX series was designed to have snap-on mating, are available for rf cables, PCB type and SMT type.

MMCX gets low RF leakage from the nonslotting of its outer contact and it maintains solid electronic performance from DC-6 GHz. Though increasingly being replaced by smaller connectors, like the U.FL (MHF), MMCX Connector is still the standard for wireless and PCS applications.

Assembly instruction .................................................................... 9Mounting Holes .......................................................................... 13

MMCX SERIES

CMPTER

Interface dimensions conformable to the standards:

International: IEC 61169-4Europe: CECC 22190Germany: DIN 47223, VG 95250 IP rating (interface, mated) IP68

PLUG JACK

mm inch mm inchmin. max. min. max. min. max. min. max.

1 2.70 .106 1 2.60 .102

2 1.45 .057 2 0.90 1.20 .035 .047

3 0 0.25 .010 3 1.40 .055

4 3.15 .124 4 1.57 1.63 .062 .064

A 2.40 .095 5 2.30 2.34 .091 .092

B 1.58 1.62 .062 .064 6 0.23 .009

C 0.38 0.42 .015 .017 A 2.41 .095

D 0.20 .008 B 2.88 2.90 .113 .114

X1 29° 31° C 3.00 3.04 .118 .120

X1 68° 72°

X2 28° 32°

X3 13° 17°

TECHNICAL DATA

CMPTER

ELECTRICAL DATA

Impedance

Frequency range

Voltage Rating

V.S.W.R.

50 Ohm

DC 0-6 GHz

335 VRMS(max at sea level)Straight styles: 1.20Right angle styles: 1.25

Dielectric Withstanding Voltage

Contact resistance

10,000 M Ω

Center contact: 5 Ω ; Outer contact: 2.5 Ω

MECHANICAL DATA

Contact captivation

Durability(matings)

≥ 10N/2.3 lbs

500 mating

ENVIRONMENTAL

Thermal shock

Moisture resistance

Corrosion

-55 °C ...+ 155 °C/-67°F ...+ 311 °F

MIL-STD-202, Method 107,Condition F

MIL-STD-202, Method 106

Saltspray test acc.to MIL-STD-202

Temperature Range

MIL-STD-202, Method 204, Condition DVibration

MATERIAL DATA

Centre contacts

Insulator

Crimp Ferrule

Teflon

Copper

Male Contact

CABLE CONNECTORS

Straight cable plugs (male)

CMPTER

31-03-1M12-001

P/N Cable TypeFinish

BodyCenter

Gold Gold

Assembly Instruction Notes

RG178 A01

31-03-1M04-002

BodyCenter

Gold Gold

LMR100/RG174/RG316 A01

31-03-2M11-004

BodyCenter

Gold Gold

Semi-rigid .086/RG405 A02

Cable entry crimpCentre contact soldered

Cable entry solderedCentre contact soldered

7.00 [.276] 3.20

12.50 [.492]

10.00 [.394]13.50 [.531]

12.50 [.492]

CABLE CONNECTORS

Right angle cable plugs (male)

CMPTER

31-13-1M12-015

BodyCenter

Gold Gold

RG178 A03

31-13-1M04-011

BodyCenter

Gold Gold

RG316/LMR100/RG174 A03

31-13-2M11-007

BodyCenter

Gold Gold

RG405/Semi-rigid .086 A04

2.40 [.094 DIA.]

9.00 [.354]

7.00 [.276] 3.20

10.00 [.394]

2.40 [.094 DIA.]

10.00 [.394]

2.40 [.094 DIA.]

9.00 [.354]

CABLE CONNECTORS

Straight cable jacks (female)

CMPTER

31-02-1M04-010

BodyCenter

Gold Gold

RG316/LMR100/RG174 A01

31-02-2M11-013

BodyCenter

Gold Gold

RG405/Semi-rigid .086 A02

10.00 [.394]

13.50 [.531]

PCB CONNECTORS

Straight PCB plugs(male)

CMPTER

31-03-6L2-016

P/N Mount HoleFinish

BodyCenter

Gold Gold

31-03-5L2-017

P/N Soldering PadsFinish

BodyCenter

Gold Gold

SMT mounted

Without stand-off

4.50 [

.177 D

0.35 [.014]

1.75 [.069]

3.50 [.138]

0.60 [.024]

2.90 [.114]

10.20 [.402]

3.00 [.118]

7.50 [.295]

2.54 [.100] 3.50 [.138 SQ.]

4- 0.50 [.020 SQ.]

PCB CONNECTORS

PCB jacks(female)

CMPTER

31-02-6L2-018

BodyCenter

Gold Gold

31-02-5L2-019

P/N Soldering PadsFinish

BodyCenter

Gold Gold

31-12-5L2-020

BodyCenter

Gold Gold

SMT mounted

Without stand-off

3.00 [.118]

7.50 [.295]4.5

0 [.17

7 DIA.]

0.35 [.014]

1.75 [.069]

3.50 [.138]3.

0.60 [.024]

7.50 [.295]

3.00 [.118]

2.54 [.100] 3.50 [.138 SQ.]

4- 0.50 [.020 SQ.]

2.54 [.100] 3.50 [.138 SQ.]

4- 0.50 [.020 SQ.]

3.50 [.138 DIA.]

3.00 [.118]

6.80 [.268]

ASSEMBLY INSTRUCTIONS

CMPTER

Stripping Dimensions

BodyCenter Contact

Heatshrink sleeve(option)

Ferrule

2. Slide the center contact on until it bottom against the cable dielectric.

Solder the center contact onto the cable.

3. Fan the braid.

4. Slide the cable into the body until stops.

1. Slide the heatshrink sleeve onto the cable (option).Slide the ferrule onto the cable.Strip the cable as Striping Dimensions.

5. Slide the ferrule over the braid.Crimp the ferrule with crimping tool (see table).

6. Cut the excess of braid if necessary.Slide the sleeve over the ferrule and heatshrinkit in place (option).

P/NHEX. Crimp Tool (mm [in])

Stripping Length (mm [in])

ba cCable Type

31-03-1M04-002LMR100/RG174/RG316 1.8 [.071]

31-02-1M04-0103.25 [.128]

31-03-1M12-001 RG178 2.54 [.100]

10 [.394]

8.5 [.335]2 [.079]

2 [.079]

1.8 [.071]

CMPTER

BodyCenter Contact

1. Slide the heatshrink sleeve onto the cable (option).Strip the cable as Striping Dimensions.

2. Slide the center contact on until it bottom against the cable dielectric.

Solder the center contact onto the cable.

3. Slide the cable into the body until it stops.

4. Solder the body onto the cable.

5. Slide the heatshrink sleeve over the body and heatshrink it in place (option).

aStripping Dimensions

P/N Stripping Length (mm [in])Cable Type Notes

31-03-2M11-004RG405/Semi-rigid .086

31-02-2M11-0131.8 [.071]

CMPTER

1. Slide the heatshrink sleeve onto the cable (option).Slide the ferrule onto the cable.

3. Push the body under the braid.Slide the ferrule over the braid.

2. Fan the braid.

4. Crimp the ferrule with crimping tool (see table).

5. Place the cap into the body.

Stripping Dimensions

Ferrule

Strip the cable as Striping Dimensions.

6. Press on the cap until stops.Slide the sleeve over the ferrule and heatshrinkit in place (option).

Solder the inner conductor.

P/NHEX. Crimp Tool (mm [in])

Stripping Length (mm [in])

ba cCable Type

31-13-1M04-011

31-13-1M12-015

9 [.354]LMR100/RG174/RG316 3.25 [.128]

8 [.315]

1.2 [.047] 1.3 [.051]RG178 2.54 [.100] 1.2 [.047] 1.3 [.051]

CMPTER

Back Nut

aStripping Dimensions

1. Slide the heatshrink sleeve onto the cable (option).Strip the cable as Striping Dimensions.

2. Slide the cable into the body until it stops.Solder the inner conductor.

3. Solder the cable onto the body.

4. Slide the sleeve over the body and heatshrink it in place (option).

Screw the back nut onto the body.

P/N Stripping Length (mm [in])Cable Type Notes

31-13-2M11-007 RG405/Semi-rigid .086 1.1 [.043]

MOUNTING HOLES

CMPTER

M01 M02

1.27 [.050]

2.54 [.100]

5- 0.80 [.031 DIA.]

7.50 [.295]

9]4.60 [.181] 0.40 [.016]

Office Adress: #7-5, East Business Area, DanTu District, ZhenJiang City, 212028, JS, China

Tel:+86 511 8443 6131 Fax:+86 511 8717 7136

Email: sales@cmpter.com Website: http://www.cmpter.com

Cmpter Electronics, Ltd.

Mmcx connector series

Engineering

Transcript of Mmcx connector series

RF Connector Overview Guide - Digi-Key Sheets/Linx Technologies PDFs... · – 1 – RF Connector Overview Guide Linx Technologies offers a wide variety of SMA, MCX, MMCX and MHF

Amphenol 97 Series Standard Cylindrical Connector

Souriau 851-Series Connector Catalog

SERIES MMCX MICRO MINIATURE CONNECTORS · 2019. 3. 15. · HUBER+SUHNER£MMCX 51 SERIES MMCX MICRO MINIATURE CONNECTORS DESCRIPTION HUBER+SUHNER£MMCX connectors are intended for

The EAD Pocket Guide innovative multiband ... · Cable RG - 174 Lengths 100/150/200mm Applications GSM, Cellular, WLAN Frequencies M2MAC-MR-XX-FMB Connector 1 MMCX RA Connector 2

MMCX connector series

HFC35 & HFC57 SERIES CONNECTOR Specifications

US SERIES CONNECTOR FOR AUTOMOBILES - …prd.sws.co.jp/components/series/pdf/share/1304us_web.pdfUS SERIES CONNECTOR FOR AUTOMOBILES US UNSEALED SERIES HFC SERIES US SEALED SERIES

716 connector series

USB CONNECTORS - US · PDF fileusb connectors usb connectors mini usb connector & cable esb3,4,5 series usb connector & cable esb0 series (connector) esb1 series (cable)

Amphenol 97 Series Standard Cylindrical Connector · 2016. 11. 15. · Amphenol offers the 97 Series Connector Family - A general duty standard cylindrical connector, MIL-5015 style.

TNCA connector series

CONNECTOR INSTALLATION INSTRUCTIONS Wind-Lok Series

SR-87 engine board manual v1.0.1 - Rickey's World · SRSSRRSR----87 GPS Engine Board Manual87 GPS Engine Board Manual 4 2.1.8 RF Interface Antenna connector type MMCX 2.1.9 Serial

Miniature Rugged Connector Series

RF Connector Overview Guide - Linx Technologies · 9/24/2015 · RF Connector Overview Guide Linx Technologies offers a wide variety of SMA, MCX, MMCX and MHF radio frequency connector

User Manual & Setup Guide v1 - img.staticbg.comimg.staticbg.com/file/products/20180823051701HolybroKopis2Manual.pdfo MMCX antenna connector for easy, secure connection. Won’t break

High Temperature Micro-MDM Connector Series

10 kbps 4.4 Mbps - · PDF file10 kbps – 4.4 Mbps ... · Serial Interface Speed 2 Mbps CMOS / 1 Mbps RS232 · 24-pin Samtec MTMM-112-05-L-D-159 power/data connector · MMCX RF connector

RF CONNECTOR ADAPTER KITS - TCCTNC, SMA, BNC, MMCX, and Reverse Polarity connectors for easier wireless LAN interconnects. Both kits Both kits come packaged in a soft, compact zippered