Post on 10-Mar-2016
description
Docks
Doors & Loading Dock Product Handbook
Australia’s largest range
Total Dock package
Design a solution
The Leda Advantage
About Us
Leda is the market leader in the design and manufacture of physical security and access control products.Leda maintains an absolute commitment to quality and has developed special manufacturing methods and equipment to ensure a consistently high quality standard for all its products.
The Leda Advantage
• Innovative products• Stylish contemporary designs• High vandal resistance• Reliable and low maintenance• Cost efficient• Superior installation methods• Unparalleled technical advice with product
choice and specification
Quality
As part of its policy of ongoing improvement, Leda works continually to advance the effectiveness and efficiency of all its products.When selecting or specifying from within this handbook, it is advisable to consult directly with Leda to ensure that specifications have not been altered. Leda can also advise on the suitability of your dock or door selection for the proposed application.
Service
Every Leda client is guaranteed unrivalled service,advice and technical support. Products are distributed and supported through branch offices or distributors throughout Australia and New Zealand.
Warranty
All Leda products carry a full comprehensive 12 month warranty. Optional warranty extensions are also available if and when Preventative Maintenance Contracts (PMC) are entered into.
Materials and Finishes
Most Leda products are available in a pre-primed painted finish or galvanised mild steel. Leda utilises its own robotic cutting / welding and powder -coating equipment to ensure a consistent, high quality finish to all of its products.
Product specifications displayed in this handbook are accurate at time of printing.Improvements and additions are continually being made to the product range.Check with your nearest Leda Sales office that the designs and specifications displayed are still current.
Comprehensive brochures and technical literature on the complete range of Leda’s architectural and security products are available on request or visit the website:
www.ledasecurity.com.au
Copyright © Leda Security Products Pty Ltd 2011.All rights reserved. No part of this work may be produced or utilised in any form or
by any means, electronic or mechanical, including photocopying, recording or
in any information storage or retrieval system, without the prior written permission
of Leda Security Products Pty Ltd.
General > Contents
DocksDock Brain 3
Dock Brain Eyes 7
Dock Levellers 9
- Automatic Dock Leveller 12
- Manual Dock Leveller 15
- Dock Drawbridge 16
- Drawbridge Frame 17
- Options & Accessories 18
Dock Seals 20
Dock Barriers 23
Dock Ramp 24
Dock Structures 25
Dock Shelters 26
DoorsFabric Doors 27
Large Steel Doors 32
Panel Lift Doors 34
High Speed Doors 41
- Sector Reset 42
- Smart Reset 44
- Sector Plus 46
- Smart Plus 48
- Flash CS 50
- Traffic C 52
- Traffic CM 54
- Energy 56
Flexible Flap door 58
Flexible Strip door 60
Materials HandlingScissor Lift - Standard 63
Scissor Lift - Shallow 64
Scissor Lift - Accessories 65
Freight Hoists 66
Contact Us 67
3
Product Range > Docks
DockBrain
Complete Automated Dock Solution100% Australian developed
Dockbrain for the first time links new and existing dock equipment with planning and control.This Australian innovation from Leda can change the way you look at and run your loadingdocks, leading to enhancements in:
SafetySecurityEfficiencyEnvironment
Planning
Minimise quing of trucks by allocating delivery slotsExtract value from existing resources before catering for peak demandPreload freight to appropriate doors ready for loading
Control
Secure your docks and doorsEnsure docks are safely operated withtouchscreen interfaceLog and report on movements at all your docksfor both trucks and forksNavigate incoming trucks to designated doors.
Docks1300 780 450
DockBrain
4
Product Range > Docks
Dockbrain is installed to meet the operational control levels you need. Whether it is dock safety at tier 1 to integrated multi site control at tier 3, Dockbrain has you covered. It is important to note that each increasing tier level also incorporates those beneath it.
Tier 1
Door Control
At its basic level Dockbrain is a safer way to operate a dock with its touchscreen interface. It has never been faster to train staff on dock operations by incorporating a rigid safety checklist with easy to follow text and pictures.All commands are logged for audit and safety functions.
Tier 2
Site Control
Tier 1 safety and touchscreen plus site control. Now you can control multiple doors on your warehouse from the one location. Ideal for truck to door allocation from your reception or receiving /despatch office. Superior computing power means comprehensive reports and auditing features such as comprehensive time stamping of all instructions and events. The system can receive service requests from individual doors and alert operators to all operational and safety concerns.
Tier 3
Multi Site Control
Add all the functions for Tier 1 and 2 plus the added functionality of managing your multiple locations via the web full time or after hours. Integrate CCTV and centrally manage your docks in the 21st century. The Dockbrain website allows you or the trucking company to pre-book truck times and drivers to specific docks to facilitate warehouse planning, Visually track and audit dock movements to integrate with your security system.
5
Product Range > Docks
DockBrain
Dockbrain Equipment Control
Dockbrain is equipment independent so will integrate with pre-existing loading docks or you can design a solution from scatch using this handook. Leda realise distribution is not one size fits all, so we will develop a dockbrain solution with you to meet individual company requirements from one to hundreds of doors and multiple facilities.
Equipment
Leda is able to integrate existing dock equipment or can supply and install a range of dock and door equipment to meet your warehousing requirements. Further information is contained in this handbook but if you have any specific requirements or questions to consider then please contact our offices.
Scoping
Take advantage of Leda’s experience if you would prefer Leda to scope & audit sites to see what equipment is in place for a Dockbrain solution.
Dock AirConditioning
System
Floodlight
Dock DoorHigh Speed Door
Traffic Lights
LDDLDock Light
DOCKBRAINLeda's Dock
Controller
IntercomKeyswitch
Prox Card Reader
TMH60Boom Gate
IntercomKeyswitch
Prox Card Reader
Flashing Light
Audible Alarm
Traffic Lights
LDL20Dock Leveller
Dock Shelter
LDSA3635Inflatable Seal
LDRBRubber Bumper
ChocksAuto
Reversing SensorWheel Guides
LOOPTRUCKVehicle Loop
Docks1300 780 450
Product Range > Docks
6
DockBrain
Web Control (Tier 3)
Imagine controlling your docks and doors from your office, reception, security or anywhere else at site. Now imagine this control from any web connected PC! You can centrally control 1 or hundreds of sites and docks with any web browser (even a web connected tablet PC such as iPad if you are on the move).
Prebooking
Booking a slot can be by your own staff where trucks can call in to request a slot or a third party restricted website login is available for freight companies to log in and manage their own fleet and drivers. You can even track site inductions.
Security
In its strictest security sense, you can provide vehicle and driver information to your security team to vet drivers prior to deliveries or at the front gate or lastly the actual dock. Ideal for sensitive government sites or where you want to block specific trucks or drivers from entry.
Communications
Dockbrain can SMS or email confirm arrival times to trucks queued or on approach. This is ideal for sites with peak demand, limited parking or space (eg construction sites), secured locations or temperature controller. By calling trucks as required you can avoid queuing at the front gate and call trucks to your location as required. Right down to the very door they are to dock at, which is ideal for load preperation.
OHS
Dockbrain acts as a link between your equipment register for docks and the required training and maintenance for such equipment. Most notably your staff at the dock level can report service faults as they arise.
7
Product Range > Docks
DockBrain Eyes Increase dock leveller & scissor lift safety withintelligent sensors from DockBrainTM
Product Code : PEBEAMLZR
Set exact detection zone parameters to the mmDiscern people & vehiclesEnter block out zones in your detection areaAdd “Virtual” open or close buttonsRemote controller for settingsComes with 10 metres of cable
Performance
Maximal detection range: 9.9 m x 9.9 mVariable depth of plane (1 m max.) according to the installation heightHigh level of safety with a complete three-dimensional detection in front of doorDetection of small objectsReplaces current solutions such as contact edges, light beams & gridsEasy installation & retrofit
Introduction
Safety in any industrial setting is the priority for any organisation these days. In appraising the safety of our own technicians servicing hydraulic equipment, Leda has developed a system that can be adapted to enhance personnel safety around equipment such as Leda’s scissor lifts or dock levellers.
Dockbrain eye’s can be adapted to be used for doors, shared vehicle & pedestrian areas, an alternative to light grids or PE beams where appropriate. So talk to Leda today to discuss adapting this product to meet your safety objectives.
Scenario 2People on or near the dock leveller or scissor lift.Scenario 1
Protect service technicians or anyone entering dock leveller cavity.
Docks1300 780 450
8
DockBrain Eyes
Product Range > Docks
Technical Specifications
Technology LASER scanner, time-of-flight measurementDetection mode Presence ( EN 12453 Type E )Max. detection range 9.9 m × 9.9 mRemission factor > 2 %Angular resolution 0,3516°Typ. min. object size 2,1 cm @ 3 m / 3,5 cm @ 5 m / 7 cm @ 10 m (in proportion to object distance)Testbody 700 mm × 300 mm × 200 mm (testbody A according to EN 12445)
Emission characteristics
IR LASER Wavelength 905 nm; max. output pulse power 75 W; Class 1Red visible LASER Wavelength 650 nm; max. output CW power 3 mW; Class 3R
Supply voltage 10-35V DC @ sensor terminalPower consumption < 5 WResponse time Typ. 20 ms; max. 80 ms
Output 2 electronic relays ( galvanic isolation - polarity free )Max. switching voltage 35V DC / 24V ACMax. switching current 80 mA (resistive)
LED-signals
1 blue LED: power-on status1 orange LED: error status2 bi-coloured LED: detection/output status
Dimensions 125 mm (L) × 93 mm (D) × 70 mm (H) ( mounting bracket + 14 mm )Material PC/ASAColour BlackRotation angles on bracket -5° to +5° ( lockable )Tilt angles on bracket -3° to +3°Protection degree IP65Temperature range -30 °C to +60 °C if poweredHumidity 0-95 % non-condensingVibrations < 2 G
Product Range > Docks
Docks Introduction
9
Safety of one or two hydraulic cylindersHigh duty cycleProven design
Introduction
Loading docks are a critical piece of the supply chain by linking your warehouse to trucking fleet. At Leda we understand the requirement for tested, heavy duty, reliable & safe to operate equipment is paramount to a successful loading dock
One or two rams
With two rams you can point load more which you cannot do with some central mounted single hydraulic ram docks. Leda’s docks are also rated to carry the load whether a truck is in position or not. This is critical should the truck accidentally ever drive off.
Safety
Mechanical lockout for servicingDrive-away rated to hold fork should truck drive offLowers or raises with truck automatically during loading or unloadingToe guard side protectionPotential for DockBrain safety enhancementi.e. can be interlocked with truck restraint
Operation
While the Leda dock console is easy to operate, proper training is required to operate a dock leveller. Safety can be further enhanced with the DockBrain touchscreen as further checks & controls can be introduced.
DocksProduct Range > Docks1300 780 450
Docks Introduction
10
One or two hydraulic cylindersHigh duty cycleProven design
Standard Specifications
Generally at least double the length of the vehicle but dependant on type.
HeightDock height should equal your average load height (not truck height)
Note: Rear 2 pallets from container may dictate that these are unloaded prior to the operation of ramp by a trained & experienced operator.
AlertDock Heights?
The height of your dock should be at the average height of your loads.
Remember that containers can add 200mm to your truck bed loads.
Product Range > Docks
Docks Introduction
11
Safety of two hydraulic cylindersHigh duty cycleProven design
Recommended Maximum GradientsNote: Check vehicle manuals & AS2359.6
Powered industrial trucks - Safety code
Component overview
Finish
Paint RAL 7016
1 Leveller platform2 Swing lip3 Leveller frame4 Toe guards5 Warning stripes6 Hydraulic unit7 Lift cylinders8 Swing lip cylinder9 Buffers (option)10 Tail lift recess11 Control unitSuggested positioning for control unit is drivers side of dock so operator & truck driver can see each other.
Conduits
Hydraulics - 50mm minimum - GreyPower - 32mm minimum - Orange
Product Code LDL20 LDL25 LDL30Length (mm) 2000 2500 3000
Width (mm) 2000
Up Length (mm) 400
Load Capacity 6 tonnes (60kN)
Max. Point Load (6mm tear plate) 1.3N / mm2
Max. Point Load (8mm tear plate) 6.5N / mm2
Finish 80 um Wet Spray RAL 7016
Power 400V 3 - phase
Motor 0.75kW Hydraulic unit
Cast in Frame LDL20CF LDL25CF LDL30CF
DocksProduct Range > Docks1300 780 450
12
Automatic Dock Leveller One or two hydraulic cylindersHigh duty cycleProven design
Product Code : LDL20
Durable and extremely safeQuick operationEasy to install
THOUSANDSINSTALLED
Cast In Frame
Product Code: LDL20CFOrder your cast in metal work to
suit your project timeline
2200
400250
300
Product Range > Docks
13
Automatic Dock Leveller One or two hydraulic cylindersHigh duty cycleProven design
Product Code : LDL25
Durable and extremely safeQuick operationEasy to install
Cast In Frame
Product Code: LDL25CF
DocksProduct Range > Docks1300 780 450
14
Automatic Dock Leveller One or two hydraulic cylindersHigh duty cycleProven design
Product Code : LDL30
Durable and extremely safeQuick operationEasy to install
Longer length makes for shallowergradients for more load heights
Cast In Frame
Product Code: LDL30CF
Product Range > Docks
Manual Dock Leveller
15
Manual dock levelling solutionCost effective & Easy to use
Manual dock levellerQuick and easy to useThousands installed worldwideIdeal for standard load heights
Cast In Frame
Product Code: LDLRF
Additional options
LDL30F - see page 17LDDBF - see page 17
RecessedLDL2003WR
ProtrudingLDL1703WPLDL2003WP
DocksProduct Range > Docks1300 780 450
Dock Drawbridge
16
Manual dock to truck connectionCost effective & Easy to useGreat for variable truck heights
Product Code : LDDB
Spring loaded assisted lift, easy to useGreat reach up to 2000mmMounted on rail so can move horizontally. Rail mounted - 4.0T capacity, Fixed - 6.0T capacityRail length - 3.0M standard
Fit to existing docks
Automatic option available
Adjustable slide rail
A B C Capacity/Kg Unit weight/Kg
LDDB1515 1500 1500 195 4000 275
LDDB1815 1800 1500 195 4000 290
LDDB1820 1800 2000 260 4000 385
LDDB2020 2000 2000 260 4000 430
C
B
A
Product Range > Docks
Drawbridge Frame
17
Add dock hardware to existing concrete docksDesigned to withstand hardware load ratings
Cast In Angle
Product Code: LDL30F
Compatible with:Dock Drawbridge &Protruding Manual Dock Leveller
Cast into new concrete docks
Product Code : LDDBF
Compatible with:Dock Drawbridge &Protruding Manual Dock Leveller
Strong construction200 x 100 RHSHot dip galvanised for long lifeLoad rated to dock hardware
Retrofit to existing concrete docks
DocksProduct Range > Docks1300 780 450
Options & Accessories
18
For Docks
Buffers LDRBPrevent damage to buildings from reversing trucks.
Chocks - ManualSimple check, site staff can implement to prevent truck movement.
Boom Gates TMH60Refer to Industrial Gates & Perimeter Security Handbook.
Fencing / GatesPhysical barriers to stop pedestrians entering dangerous areas.
BarriersCan prevent damage to stock or buildings.Ideal for segregated pedestrian aisles & areas.
Reverse SensorDetects truck backing up to dock & provides visual feedback through flashing of traffic light signal.
Chocks - AutoPrevents trucks driving off until safety assured.Can be interlocked to dock leveller through Dockbrain.
Wheel Guides LDWGAssists reversing trucks by guiding them to a fixed position.Ideal for Automatic dock leveller.
RFIDDetect specific trucks at individual doors or forks loading trucks.All can be recorded through Dockbrain.
Traffic LightsDirect trucks externally or forks internally.
Product Range > Docks
Options & Accessories
19
For Docks
Dock Lights LDDLDesigned for maximum illumination of truck interior.
PE BeamsCan prevent movement of dock equipment.
Insulated dockInsulate your Auto dock levellers for thermal protection.
Dock StepsQuick pedestrian access from ground level into dock.
Road Loops LOOPTRUCKFor detection of vehicles either side of door.
Convex Mirror LDCMFor drivers of forks to utilise when maneuvering in & out of trucks.
Vertical Rubber BumperPrevent damage to buildings from reversing trucks.
DocksProduct Range > Docks1300 780 450
Dock Seals
20
Foam Seal
For fixed vehicle size fleets.
Creates a firm & positive seal for a known vehicle size.It is important to note vehicle force on seal & wall or structure seal in mounted to.Ask about our range of colours or having your own logo printed on the seals.
Pad Thickness: 180mmTop Pad Height: 450mmSide Pad Width: 300mm
Foam Seals have high visibility side pleating
Product Range > Docks
Dock Seals
21
Mechanical Seal
LDSM3232 - height 3200mmLDSM3234 - height 3400mmLDSM3236 - height 3600mm
Range of sizesRain & weather protectionFits various truck sizes Optional yellow
strip shownContrast assists reversing drivers
AfterBefore
Truck TruckBuilding Building
Seal compresses as truck reverses into position for tight fit
DocksProduct Range > Docks1300 780 450
Dock Seals
22
Refrigerated warehousingPower saving
Inflatable Seal
LDSA3635 - height 3500mmLDSA3637 - height 3700mmLDSA3639 - height 3900mm
Shelter inflates around rear of truckFor refrigeration or temperature sensitive sitesBuilt 40mm panel structure3mm PVC
Note:Ask about our levellers
insulated docks.Save energy for refrigerated
warehousing.
Product Range > Docks
Dock Barriers
23
Protect dock openings from damageHeavy duty construction
Product Code : LDFG
Constructed from 32 to 40NB pipeGates can be locked closed & at 90deg open to provide a safe barrier either side of the loading area.Easily upgrade existing loading bays - simple installation via masonry anchors.Custom opening dimensions & matching fencing available.
Product Code : LDDP
Typically constructed from 80NB pipeCustomisable to your dock openingCast in or base plate installation
DocksProduct Range > Docks1300 780 450
Dock Ramp
24
For integrating floor to dock leveller heightsHeavy duty design
Minor Ramp
Small deviations in dock leveller heightUp to approx 200mm
Major Ramp
Large forklift ramp for complete dock leveller solution on slab
Leda will match a ramp to your requirements to consider truck height, fork gradient, fixed or maneuverable, additional dock leveller.
Note: A scissor lift may also be able to assist in ramp applications if space is short or flexibility is required.
Product Range > Docks
Dock Structures
25
Allows leveller installation on pre-existing sitesStructurally certified
Product Code : LDDS
Stand-alone solution for housing an LDL20Automatic Hydraulic Loading Dock LevellerCan be fitted with Dock Shelters & Sectional DoorsNo major modifications to existing structuresCustomisable to suit new & existing buildingsCan make more space in the building
Hydraulic tail lift cavityNote: This requirement can increase
truck maneuvering room in area
DocksProduct Range > Docks1300 780 450
Dock Shelters
26
Extends weather protection over external levellerCustom cladding / insulation options available
Product Code : LDDSWR
Standard Loading dock shelterMultiple cladding options availableInsulated igloa’s also available
Product Code :
Loading dock shelter with inflatable seal,separating the loading area from the external environment.
Colorbondcladding
LDDS
Fabric Doors
27
Product Range > Doors
Leda industrial doors are designed & manufactured to suit a variety of applications & weather conditions for any large building opening.Our doors are specifically designed by our skilled & experienced engineers which allows Leda to tailor solutions for any requirement. Utilising either steel or aluminium frames for various working conditions & extra wind loading requirements, we can design a solution to fit the most demanding locations.From medium to extreme sizes we can design & manufacture doors up to 60m wide & heights up to 40m.All gearbox & motor systems are designed for maximum efficiency.
Engagement
Our recommended staged approach to large door projects is:1. Client to provide specifications & wind loading for the area to which the doors will be installed.
Make sure you differentiate wind loadings when the doors are closed or in motion.2. Leda will provide basic door information such as how the doors are typically mounted or similar
drawings. They are not site specific at this early stage.3. Leda will provide a door quote including engineering costs. We trust that around this point a
preferred supplier can be identified as all costs are now known. Once Leda has the wind loadings, location & door sizes we typically quote in 5-7 days.
4. If your due diligence in relation to Leda & the door are satisfied, Leda should be engaged to assist with final door designs to meet site specific building requirements including structural certificate agreement of the door which is crucial to do before the project starts. The structural engineering is billable work but no commitment beyond engineering costs is required.
5. Final door & installation costs submitted if any changes.6. Awarding of contract.
60m40m
140-160mm/sec140-160mm/sec
50-10 to 70 C
3 phasePVC fabric
Max. WidthMax. HeightOpening SpeedClosing SpeedDuty Cycle (per day)Operating TempPowerMaterials
Your Logo Here
(For larger span doors, movable mullions are installed)
MiningShippingAviation
Docks1300 780 450
Fabric Doors
28
Product Range > Doors
Lead Times Guide
While Leda will provide a complete project timeline with our quote, some timing guidelines are below:1. Quotation 5-7 days2. Engineering can be from 5 days to 5
weeks & a hard task to pin down as lots of changes, people & sign offs required.
3. From drawing sign off to goods ready for shipment (overseas) is approx. 6-10 weeks, again dependant on size & quanitity.
4. Shipment time we allow 6 weeks & add 2 more weeks for customs & road shipment to site.
5. Installation for small doors is typically 2 - 5 days & large doors up to 7 - 14 days each. Doors under 12m can be shipped largely assmebled so faster to install.
Side Rail & Top SectionsThe side guide rails & bottom sections are manufactured using reinforced steel. The rail system is made from aluminium or steel depending on individual site requirements. Each section is a maximum of 2m to enable rapid & easy repair or replacement in the event of impact damage.Cable breakage systems are installed at each end of the bottom section to prevent the door closing in the event of cable failure. The steel lifting wires are also connected to cable breakage system.
FabricThe door is made of two layers of heavy duty special 900 gram vinyl-coated polyester fabric, seperated by aluminium or steel intermediate sections.Vision panels can be built into the doors to allow light penetration when the doors are closed.
SealsSide rail rubber seals & our custom designed rubber bottom seal provide a weather & vermin resistant seal when the door is closed.
Drawing 2 - Side View
*Note: Height requirements of approx. 1500mm above clear
opening height.
Drawing 1 - Front View
MiningShippingAviation
Fabric Doors
29
Product Range > Doors
Attachment Detail
InstallationWhile all doors must go through an individual design review, these renders show typical detail of how the door attaches to the building.
Front View
DoorShown in Yellow
Building FrameShown as
Galvanised
Doors are typically attached to existing building columns via PFC brackets.
These are normally welded & bolted between existing columns & door channel.
MiningShippingAviation
Docks1300 780 450
Fabric Doors
30
Product Range > Doors
Wind RatingsSee AS/NZS 1170.2:2011 for wind information for your intended site location. Fabric doors can be designed for cyclone areas which are referred to as “Wind Region D” in the standard. Most major cities are in A regions.As part of the structural engineering review, other variables in addition to region to be considered inclulde:
Wind DirectionSurrounding TerrainShape of BuildingPositive & Negative PressureStructural HeightWind Borne Debris
That is why the structural engineering review is conducted at the start of the process so structural engineering certification is provided.Consideration should also be given for wind loadings when the door is closed, in motion, or open.
How it worksThe doors consist of either two sheets of PVC coated polyester fabric with intermediate, horizontal steel or aluminium sections, fitted between the fabrics. These intermediate sections transfer the wind load to vertical guide rails which also supply extra wind resistance. The door leaf is opened by the bottom section being lifted by steel wires which are wound up on drums, driven by the automated drive system. The sections above are stacked on top of one another & the fabric folds into pleats on the sides.
ConstructionThe door leaf is made of two layers of heavy duty special 900 gram vinyl-coated polyester fabric, seperated by aluminium or steel intermediate sections.The intermediate top section is bolted to the header box with steel wire.The fabric is attached to both sides of the intermediate sections for added strength.
Operation SystemThe system can be controlled by a completely automated system or a simple pushbutton. The control box has an up & down button & an emergency stop button.The door automation can be integrated with remote controls, radar, induction loops, sirens or traffic lights
MaintenanceThe Leda Fabric Doors are low maintenance requiring a recommended annual inspection process to check the steel cable & running rails for any signs of wear & tear.
MiningShippingAviation
Fabric Doors
31
Product Range > Doors
Standard Colour Swatch
PVCBoth sides lacquered, high gloss
DIN 75200, ISO 3795 <100mm/min900 g/m2
4300 warp / 4000 weft (N/50mm)500 warp / 500 weft (N)
20 N/cm-30 deg C+70 deg C
>6no cracks <100000x
PES1100 dtex
P 2/2
PVC Technical Data
Type of CoatingFinishFlame RetardancyTotal WeightTensile StrengthTear StrengthAdhesionCold ResistanceHeat ResistanceLight FastnessCrack ResistanceBase FabricMaterialYarn CountWeave
MiningShippingAviation
Docks1300 780 450
Large Steel Doors
Product Range > Doors
Large span doors for:Aviation, Shipping, Defence
Quad or Bi-FoldingProduct Code : LVBF
Sizing
Doors 20 x 20 metres have been installed & larger sizes can be considered.
Door Mounting
The nature of Quad or Bi-Folding doors is that the counterweight system means it is not top heavy; making it a very stable door.Doors can be designed with a self supporting frame or as part of a new building.
Wind LoadingsCan be cyclone rated
A critical question for all doors is the wind loading classification for the doors intended location. Leda can work with you in providing an entire solution including third party structural certification to AS1170.2 (2011)
Existing column in blue (example)
Door upright profile in green
(bolted to building column)
Typical plan detail of side support post
Typicalside detail
32
Townsville QLD
La Trobe Valley VIC
Large Steel Doors
33
Product Range > Doors
Large span doors for:Aviation, Shipping, Defence
Tri or Bi-SlidingProduct Code : LVBFCan be cyclone rated
Door Mounting
The advantage of Tri or Bi-Slilding doors is that the weight of the door is transfered directly to ground.This removes the need for heavy structures to suspend the doors.Doors can be designed completely independant of building or integrated inside the stucture.
Wind Loadings
A critical question for all doors is the wind loading classification for the doors intended location. Leda can work with you in providing an entire solution including third party structural certification
Automation
Leda are able to automate large doors also and have retrofitted automationto older doors on occasion
Docks1300 780 450
Panel Lift Doors
34
Product Range > Doors
Sizing Guidelines
- Panels are designed for use in daylight openings up to 36 M2 (6000mm x 6000mm)
- Max panel width 8000mm with bracing. Wind bracing recommended on all doors >5000mm width
- Wind loadings affect all dimensions
- Glazed aluminium doors recommended day-light openings up to 36 M2 4000mm maximum opening width / Theoretical maximum with bracing is 7200mm Glazed
Insulated
You can create three types of door being:
2. Glazed door for natural light
1. Insulated panels of just about any colour
3. Combination door which is both strong & allows
natural light
InsulatedVirtually no noiseHigh speed
Dock Doors
35
Product Range > Doors
Leda’s insulated panels are world class
Panels
Outer Material0.45mm Outer / 0.45mm Liner. Continuously hot dip zinc-coated structural steelStandard paint - Bright white RAL 9010 25 micron, smooth, thermosetting polyester paintAdditional colours applied on request
Insulating CoreClosed cell, Polyurethane (PUR) insulating core
PerformanceThermal - Panels have a thermal transmittance or U value of 0.51 W/m2K
Fire - During ealry stages of a fire, the PUR core swells & expands slightly to form a corbonaceous char which does not contribute to the fire load/propagate a fire in its’ early stages.
Acoustics - Panels have a single figure weight sound reduction of 25db
Operating Temperature - constant temp up to 60deg
Manufactured TolerancesThickness +2mm / -1mmHeight +/- 2mmPanel Bow +/- 3mm height & 0.2% of the widthCore voids 5mm maximum
Size of door allows calculation of door weight & motor/springs size requirements.
Note: Doors over 6000mm not warranted
Kings cross NSW
Docks1300 780 450
Dock Doors
36
Product Range > Doors
Open vision & natural lightClean, modern appearance
Glazed Panels
SectionsFinger-safe panels, matching the panels in size & join detail.Can be specified in conjunction with panels.
GlazingAs doors are overhead, glass must meet Australian Standard & is 6.83mm thick
Glass LathsPlasticAluminium
FinishStandard paint - Bright white RAL 9010Additional colours applied on request
Note: Doors over 4000mm not warranted
Dock Doors
37
Product Range > Doors
Choose from 4 types to suit your application
Lifting Types
High LiftSuits high celing
buildings where high headroom is required
Standard LiftSuits most standard industrial buildings
Springs just above the door
Low Height RoofSuits buildings with
low ceilingsSprings located at
the end of the horizontal tracks
Vertical LiftSuits very high ceiling buildingsLifts vertically & does not impose on headroom
Docks1300 780 450
Options & Accessories
38
Product Range > Doors
For Dock Doors
Controller - Standard60Nm, 230v, hold to run,mechanical limit switches.Proven quality, value formoney option.
LockElectronic slide bolt, 22mmdeflection, IP 20, 24v/DC.Must be specified wheresecurity is required.
PhotocellsUniversal, relay controlleddetection beam.
Opto-SensorsFit inside bottom sealactivated when the doormeets an obstacle.
Light CurtainsA curtain of infrared beams,form a protective screen forthe complete door opening.Available in 2 sizes.
Controller - Industrial70Nm, 230v, push buttonoperator ready forautomatic control.Electronic limit switches &chain release mechanism.
Airwave SwitchIP54 housing, activatedwhen the bottom seal of adoor meets an obstacle.
Motion DetectorMicrowave radartechnology. Smartdetection (direction &speed) of vehicles &people. IP65 rated.
Remote ProgrammerChange settings of theMotion Detector withouthaving to access the unit.
Options & Accessories
39
Product Range > Doors
For Dock Doors
Wind Bracing
Struts can be specified on any panel door to reinforce against bending, especially under wind loads & for wider doors.
Used on most panel doors above 5 metres in width or any door in high wind areas.
Springs
Torsional springs counterweight the door in a simple, compact mechanism.Standard springs area available with a 15,000 cycle life time.Heavy duty springs up to 30,000 cycle life are available - contact Leda for options.
Sping break safety devices are supplied standard on all Leda dock doors.
Work out your spring life/cycle requirements
* Operation equal to an open & close1 Consider heavy duty springs
Docks1300 780 450
Options & Accessories
40
Product Range > Doors
For Dock Doors
Controller - Standard
An operator with these features suit many if not most industrial applications.Basic control, no safety edges, no difficult programming.Simple & effective.
60Nm230V ACHold-to-run controlMechanical limit switchesProven quality, value for money option
Controller - Industrial
Automatic closing after preset timeConnection of optical, pneumatic or electrical safety edgePlug-in receiver terminalIntegrated cycle counter ready3 potential free contactsLED indication & 7 segment display for diagnosticsAutomatic bottom adjustment sensor ready
70NmSingle phase 230V AC or 3 Phase 400VElectronic limit switches & release mechanismPush button control box, ready for automatic controlPre-cabled (5 to 7 metres)Chain release (manual operation)25% to 60% duty cycle
41
Product Range > Doors
High Speed Doors
High Speed Doors are simple and easy to adapt to the most diverse requirements and guaranteefunctionality, safety and efficiency, in full compliance with regulatory requirements.They provide simple and rapid access and optimise the flow of people, goods or equipment and products.Fast opening speeds shorten the passage time, improving efficiency and reducing heat loss by minimizing opening times.
Door types Rolling Folding Self repair
Stocked by Leda
Passive edge safety
Opening speed (m/s)
Sector Reset F F F 1
Smart Reset F F F 0.8
Sector Plus F F 1
Smart Plus F F F 0.8
Flash CS F F 1
Traffic C F F F 0.7 - 1
Traffic CM F F 0.7
Energy F F 0.7
Rapid doors | 27
DescriptionSector Reset
Smart Reset
SectorPlus
SmartPlus Flash CS Traffic C Traffic CM Energy
FLEXIBLE CURTAIN
Standard see-through PVC window section, 980 x H 300, for full curtain
Super see-through PVC window section, 920 x H 1600(excluding insulated curtain)
Window sections in fine micro mesh
Double PVC see-through window section 980 x H 300for full curtain
Entire curtain of 900 g/m2 - approx. 0.7 mm thick
Curtain with modular sections for 900 g/m2 - approx. 0.7 mm thick (Sector and Smart PH max 5000)
See-through PVC modular section
See-trough PVC curtain with central red warning strip(≤ PL 3000 x PH 3400)
Non-tear full polyester curtain of 1200 g/m2 - approx. 1 mm thick in blue, grey and red
Insulated curtain Ug 4.0 W/m2, K 3.5 mm thickin blue and grey
Eco white RAL 9010 for polyester curtain - for food use
Supplement for version with 4a reinforcement strip
Polyester roll-up curtain special colour(subject to confirmation)
ACCESSORIES
Magnetic loop
Radar
433 MHz transmitter and receiver
Photocells
Buttons
Interlock
Traffic lights, red and green
Emergency devices: supplemental release devices
Emergency devices: automatic anti-panic system for set-ups without INVERTERmotion(only for Traffic and Traffic CM): PH > 4000 mm)
Emergency devices: UPS only with INVERTERmotion: (only for Smart: PL max 4000 x PH 4600 and full curtain)
Cycle counter kit
Protection in RAL 1023 yellow
Heating system for installations ≤ -20°C
KEY: optional standard
OTHER COLOURS UPON REQUEST
RedSimil
RAL 3000
BlueSimil
RAL 5010
OrangeSimil
RAL 2004
GreySimil
RAL 7038
YellowSimil
RAL 1021
GreenSimil
RAL 6026
CreamSimil
RAL 1014
WhiteSimil
RAL 9010
Light blueSimil
RAL 5012
BlackSimil
RAL 9005
Curtains - Standard available colours
Curtains - Standard available colours
Docks1300 780 450
Sector Reset
42
Product Range > Doors
Self-repairing systemVery high traffic areasSturdy, with safe and reliable performanceFast passageHigh wind resistance without compromising safety
The Sector Reset door is characterised by a sturdy compact and free-standing structure, by a front motor with black ABS protective cover in an exclusive design, easily and quickly accessible for quick checks on the components.
The motor features an optional release device for a semiautomatic emergency reopening system, which can be made completely automatic with the APS system.
Sector Reset is noted for a series of significant levels of safety such as the balancing system, the Safety Linear Encoder, (SLE), system and the sequential barriers.
The exclusive SLE, Patent Pending, device constantly controls the movement of the curtain reversing the closing motion in case of obstacles.
The sequential safety barriers protect the closing line of the door blade up to a height of 2.5 m, making the installation of other photocells or bottom safety edges unnecessary. Tight-sealing, safe, flexible, self-repairing curtains.
The curtain slides inside the side hinges making it very resistant to air and static wind pressure (up to 120 km/h). Available in a wide range of colours, it can be provided with standard transparent PVC windows and optional larger windows configured as needed, to meet a vast range of operating and safety requirements.
In addition, there is the possibility of creating partial or total silk-screens and digital prints, to meet the specific requirements of particular commercial environments.
Product code : LHSDSER
Sector Reset
43
Product Range > Doors
When taking measurements,consider the lateral space required*15 mm per side
If installing in span, consider:** = 25 mm*** = 50 mm
Self Repairing Limit
Optional photocell
Min MaxPL 900 6000PH 1700 5000
Automation dimensions
PL
PH
H HT
LT
L
515
115
** **
185
*15475
140
190
300
20018
00
***
200
400
300
PL = Horizontal openingLT = Automation full widthKey
PH = Vertical openingHT = Automation full heightL = Width side wallH = Height side wall
with safety package
PL ≥ 1200 - PL ≤ 2250
900
300
200
PL > 2250 - PL ≤ 2560 PL > 2560
980
PL > 3750
PL ≥ 1200 - PL ≤ 2250
600
1600
PL > 2250 - PL ≤ 2560 PL > 2560
920
PL > 3750
PL > 4950
PL > 4950
87654321
50004500400035003000250020001500
1000
LARGE WINDOW SECTIONS (920 x H 1600) applicable in the PH range price listNote: for PH < 2000 part of the window section winds into the transom
STANDARD WINDOW SECTIONS (980 x H 300)Windowposition
Up toPH
*OPTIONAL
*OPTIONAL
* option available only with1 or 3 window sections and PL > 3750
DIMENSIONAL SPECIFICATIONS
FULL CURTAIN
Product code : LHSDSER
Docks1300 780 450
Smart Reset
Product Range > Doors
44
Self-repairing systemHigh traffic areasFast passageLimited spaceQuick reactionHigh wind resistance without compromising safety
Smart Reset offers something unique in its product class: the special and innovative system that makes the door self repairable. With a simple and automatic opening and closing manoeuvre, the curtain can be retrieved if it accidentally slips out of its housing: after contact with an object, the door resets the first time it is opened.
Maximum functionality with the special self-repairing system
The Ditec Smart Reset roll-up door has a sturdy and compact supporting structure, a motor mounted outside the door, easily and quickly accessible for inspection, and components that are well-designed and thoroughly tested. These key features make this door an aesthetic, pragmatic solution which is easy and quick to assemble, safe and reliable.
The door can be equipped with the INVERTERmotion system, the exclusive electronic SLE device, and can also be opened manually with an emergency device with a crank handle usable from the ground.
The multiple solutions offered allow the various operational requirements and the different regulations of specific sectors of application to be met, guaranteeing good visibility and improving safety during passage.
Product code : LHSDSMR
Smart Reset
45
Product Range > Doors
Min MaxPL 900 4500PH 1000 4600
Automation dimensions
PL = Horizontal openingLT = Automation full widthKey
PH = Vertical openingHT = Automation full height
SLE
530
180*250
620
200
PH
330
200
400
60
LT = (PL + 380) 330
360
100 PL 100
HT
**
When taking measurements,consider:
** = 50 mm
For motor installation:* = 250 mm
Self Repairing Limit
PL ≥ 1200 - PL ≤ 2250
900
300
200
PL > 2250 - PL ≤ 2560 PL > 2560
980
PL > 3750
PL ≥ 1200 - PL ≤ 2250
600
1600
PL > 2250 - PL ≤ 2560 PL > 2560
920
PL > 3750
8
765432
1
4600
450040003500300025002000
1500
1000
LARGE WINDOW SECTIONS (920 x H 1600) applicable in the PH range price listNote: for PH < 2000 part of the window section winds into the transom
STANDARD WINDOW SECTIONS (980 x H 300)Windowposition
Up toPH
*OPTIONAL
*OPTIONAL
* option available only with1 or 3 window sections and PL > 3750
DIMENSIONAL SPECIFICATIONS
FULL CURTAIN
Product code : LHSDSMR
Docks1300 780 450
Sector Plus
46
Product Range > Doors
Safe and reliable, high performanceVery heavy-duty useAesthetic flexible curtains
Sector Plus is sturdy, reliable and safe, it is the ideal automatic door for areas that have to quickly handle passage of goods or people, both inside buildings and for areas of transit to the outside.
The INVERTERmotion systems offers differentiated speed settings, acceleration and braking, high performance and safety.
It can be easily adapted to every type of context both industrial and commercial, where the speed of access is important: supermarkets, car dealers, warehouses, logistics centres and production plants.
The built-in motor operates at the lowest possible power, conserving energy and prolonging operator life. Its hidden position allows even problems of an aesthetic type to be resolved without reducing the width of passage.
Product code : LHSDSEP
Sector Plus
47
Product Range > Doors
Min MaxPL 900 6000PH 1700 6000
Automation dimensions
***
****
* 15 * 15 * 15
260 440
PH
200
1000
280
290200
HTH
LT
L
1800
170 PL 170When taking measurements,consider the lateral space required:* = 15 mm per side
PL = Horizontal openingLT = Automation full widthKey
PH = HT = Automation full heightL = Width side wallH = Height side wall
If installing in span,consider:** = 25 mm*** = 50 mm
Optional photocell
Optional photocellwith safety package
Vertical opening
≤2250
PL
1 2 3 4
≤3750 ≤5000 ≤6000
930
930
930
930
930
910
110
max 6PL ≤ 5000
PH ≤ 5000
110
970
Singl eor doubl e
Quantity window sectionsper sector
Modular curtain
PHmax
6 5000
5 4100
4 3200
3 2300
2
1
Sections position
PHmax
7 6000
6 5710
5 4740
4 3770
3 2800
18302
1
970
970
970
970
Windowposition
Note 1: only the last top section cannot have a window section regardless of the number of sections and PH of the curtainNote 2: with PL < 1100 no window section is available
Max. number of optional see-through PVC sections(Sections position selected by customer according to diagram)
Standardwindow section
Doublewindow
970
DIMENSIONAL SPECIFICATIONS
FULL CURTAIN
Product code : LHSDSEP
Docks1300 780 450
Smart Plus
Product Range > Doors
48
Simple and compact for fast accessMedium trafficLimited spaceAesthetically styled
Smart Plus is a fast door characterised by rationality, compactness and modularity: these features facilitate their installation and allow operations to be performed without difficulty on all its components.
The extremely small sizes allow installation even where there are problems of space.
The fast Smart Plus doors are not only practical, but also aesthetically pleasing.
In addition to the version with complete curtain, the modular one may be chosen combing the different colours available to the transparent central sector.
The motor, outside the structure of the door, guarantees maximum performance and easy inspection.
Upon request, the motor can be equipped with an INVERTERmotion system, ensuring both high perfor-mance and safety. The SOFT START and SOFT STOP functions, being part of the system, reduce stress on mechanical parts, ensuring reliability while prolonging the lifetime of the door.
MADE TO SIZE
HERE IN AUSTRALIA
Product code : LHSDSMP
Smart Plus
49
Product Range > Doors
consider:* = 50 mm** = 50 mm
For motor installation:*** = 250 mm
Min MaxPL 900 6000PH 1700 6000
Automation dimensionsKey
HT
PH
200
1000
190
330
200
with safety package
360
80 PL 80
LT = (PL + 430)
550130
220***250
620
** * 50 * 5080
Optionalcasing
PL = Horizontal openingLT = Automation full widthPH = HT = Automation full height
Optional photocell
Optional photocell
When taking measurements,
Vertical opening
≤2250
PL
1 2 3 4
≤3750 ≤5000 ≤6000
930
930
930
930
930
910
110
max 6PL ≤ 5000
PH ≤ 5000
110
970
Singl eor doubl e
Quantity window sectionsper sector
Modular curtain
PHmax
6 5000
5 4100
4 3200
3 2300
2
1
Sections position
PHmax
7 6000
6 5710
5 4740
4 3770
3 2800
18302
1
970
970
970
970
Windowposition
Note 1: only the last top section cannot have a window section regardless of the number of sections and PH of the curtainNote 2: with PL < 1100 no window section is available
Max. number of optional see-through PVC sections(Sections position selected by customer according to diagram)
Standardwindow section
Doublewindow
970
DIMENSIONAL SPECIFICATIONS
FULL CURTAIN
Product code : LHSDSMP
Docks1300 780 450
Flash CS
50
Product Range > Doors
Safe and efficient operationExcellent sealComfortable lightHigh aesthetic effect
Flash CS is fast, reliable and compact, adapts easily to every context, both industrial and commercial. The version with see-through curtain is particularly suitable for internal rooms and display areas, ensuring the highest level of safety for cross-traffic.
Sturdy, reliable and safe, Flash CS is the ideal automatic fast door for areas with fast movement of goods and people. The extremely small sizes allow installation even where there are large problems of space.
Compact and technologically advanced, it has a modular counterweighted balancing system with strong traction belts, ensuring safe, simple and reliable operation, and extending the lifetime of the door.
Upon request, the motor can be equipped with the INVERTERmotion system for different speeds, acceleration and braking. The motor, built in for perfect aesthetics, always works with minimum effort, lengthening the operational life of the automation.
The flexible curtain of the Flash CS fast door is available in the transparent version with a central red vertical warning strip or in the coloured version with a large transparent rectangular window section. This window section permits the most diverse operating requirements to be met, ensuring better visibility and improving safety when going through the door. The brushes built into the columns ensure a very high level of air-tightness.
Product code : LHSDFCS
Flash CS
51
Product Range > Doors
Min MaxPL 1000 4000PH 1600 4000
Automation dimensions
***
****
* 15 * 15 * 15
260 440
PH
200
1000
260
290200
PL = Horizontal openingLT = Automation full widthKey
PH = HT = Automation full heightL = Width side wallH = Height side wall
HTH
LT
L
1800
220 PL 220
When taking measurements,consider the lateral space required:* = 15 mm per sideIf installing in span,consider:** = 25 mm*** = 50 mm
Vertical opening
Optional photocellwith safety package
Optional photocell
≤1400 >1400PL
720 920A
≤1900 ≤2500PH
1000 1500
>2500
2000B
130PL
PL
A= =130
510 380
B
Polyester curtain with PVC window Entire curtain in PVC
� PL 3000 x PH 3400 � PL 4000 x PH 4000
DIMENSIONAL SPECIFICATIONS
FULL CURTAIN
Product code : LHSDFCS
Docks1300 780 450
Traffic C
Product Range > Doors
52
Reliable, fast and safe access in medium and large entrancesSpeed setting with the optional INVERTERmotion systemCopes with high wind loads without compromising safetyInternal and external entrances
Traffic C is a door with sturdy, reliable and safe folding, capable of offering fast access. The door is suitable for medium to large entrances and works with ease during the most diverse conditions, including in entrances exposed to wind and in special conditions such as low-pressure rooms. It has a built-in motor, fully concealed in the frame. The motor operates at the lowest possible power, conserving energy and prolonging operator life. Has a modular counter weighted balancing system with strong drive belts ensuring safe, smooth and reliable operation.
The solution of the sequential safety barriers, specifically designed to be mounted near vertical runners, translates into an additional instrument in terms of reliability.
Upon request, Traffic C can be equipped with the INVERTERmotion system which provides different speeds, acceleration and braking. The SOFT START and SOFT STOP functions, being part of the system, reduce stress on mechanical parts, ensuring reliability while prolonging the lifetime of the door.
They are ideal for providing quick access to vehicular traffic, and the rapid opening and closing times which minimize indoor temperature changes.
Suitable for windy conditions, the curtain comes in several wind resistant versions that can handle up to 120 km/h static wind pressure resistance.
MADE TO SIZE
HERE IN AUSTRALIA
Product code : LHSDTC
Traffic C
53
Product Range > Doors
280
1800
PH
HTH
200
1000
280170 PL 170
190LT
L
PH ≤ 4500 PH > 4500700 750
PL = Horizontal opening LT = Automation full widthKey
PH = HT = Automation full heightL = Width side wallH = Height side wall
Min MaxPL 1500 6000PH 2000 5500
Automation dimensions
** *
If installing in span,consider:* = 20 mm** = 50 mm
Vertical opening
Optional photocellwith safety package
Optional photocell
930
930
930
930
930
930
910
110
max 2 (PL ≤ 6000)
PH ≤ 4500
max 1 (PL ≤ 6000)
PH > 4500
500
110
12
11
10
9
8
7
6
5
4
3
2
1
500
500
500
500
500
500
500
500
500
380
5500
5000
4500
4000
3500
3000
2500
2000
7 5500
6 4800
5 3900
4 3000
3 2100
2
1
≤2250
PL
1 2 3 4
≤3750 ≤5000 ≤6000
Windows
Quantity window sectionsper sector
PHmax
Windowposition
Modular curtain PHmax
Sections position
Max. number of optional see-through PVC sections(Sections position selected by customer according to diagram)
Note: modular PVC see-through section can be placed on all sections, except the highest
Note: only the first bottom and last top sections cannot have a window section, irrespective of the number of sectors and PH of the curtain
DIMENSIONAL SPECIFICATIONS
FULL CURTAIN
Product code : LHSDTC
Docks1300 780 450
Traffic CM
54
Product Range > Doors
For large entrancesReliable functionality for entrances in diverse conditions, including windy areas Reliable, fast and safeSpecial conditions like strong winds and low pressure roomsInternal and external entrances
The Traffic CM door is a sturdy, reliable and safe solution suitable for large entrances. It is the best solution for external entrances exposed to wind and in special conditions such as low pressure rooms.
It features a built-in structure housing the motor, a counte rweight balancing system, control and safety devices and a fast semi automatic reopening device. The counterweighted balancing system ensures high operating standard in terms of performance and safety. Maximum operational safety is also ensured by photocell sensors in the frame and the special bottom edge.
Traffic CM has a motor that operates at the lowest possible power, conserving energy and prolonging the operator life. It is supplied with 1 or 2 motors depending on its size.
The vertical movement of the door blade is done with lifting belts which raise and progressively gather the different sections in the upper part of the door. The transparent window sections guarantee better visibility and more safety for those passing through the door or working near it.
Product code : LHSDTCM
Traffic CM
Product Range > Doors
380
1800
PH
HTH
200
1000
380
200
PH ≤ 4500PH ≤ 6000PH ≤ 7000PH ≤ 8000PH > 8000
700850950
11001200
Min MaxPL 1800 11000PH 2710 7000 (8500 with PL max 9000)
Automation dimensions
***
****
* 15 * 15
LT
L
220 PL 220
* 15
PL = Horizontal openingLT = Automation full widthKey
PH = HT = Automation full heightL = Width side wallH = Height side wall
When taking measurements,consider the lateral space required:* = 15 mm per sideIf installing in span,consider:** = 25 mm*** = 50 mm
Vertical opening
Optional photocell
Optional photocellwith safety package
500
110
500
500
500
500
500
500
500
500
500
400
500
13
1110987654321
600012 5500
5000400035003100
13
1110987654321
850012 7500
13
1110987654321
700012 6500
WindowPL ≤2250
1
≤3750
2
≤5000
3
≤6250
4
≤7500
5
≤8500
6
≤9000
7
≤11000
8
700
110
700
700
700
700
700
700
700
700
700
600
700
600
110
600
600
600
600
600
600
600
600
600
500
600
PL ≤2250
1
≤3750
2
≤5000
3
≤6250
4
≤7500
5
≤8500
6
≤9000
7
≤11000
8
PL ≤2250
1
≤3750
2
≤5000
3
≤6250
4
≤7500
5
≤8500
6
≤9000
7
PHmax
Sectionsposition
PHmax
Sectionsposition
PHmax
Sectionsposition
Curtain up to PH > 6000 (PL max 11000) Curtain from PH > 6000 up to PH 7000 (PL max 11000)
Curtain from PH > 7000 up to PH 8500 (PL max 9000)
Window
Window
Nota 1: only the bottom first section and the last top section cannot have windowsNota 2: centre distance measurements are supplied for information only
DIMENSIONAL SPECIFICATIONS
FULL CURTAIN
Product code : LHSDTCM
Docks1300 780 450
Energy
Product Range > Doors
56
Simple, practical and reliable fast access in medium and large entrances Special conditions like strong winds and low pressure roomsComplete curtains or flexible modularsInternal and external entrances
Energy is suitable for medium and large openings and entrances. A sturdy and compact supporting structure, in combination with well-designed and tested motor and components, ensure uncompromising quality. The small size allows them to be installed also in small spaces and their reliability guarantees their use in the most diverse conditions, also where there is wind or in areas with low pressure.
The motor, mounted outside the door, is supplied complete with a manual emergency re-opening device. An optional convenient operation rod can be provided at a person’s average height. The outside-mounted motor comes to the left as standard but it is also available as an option to be mounted to the right. The motor upon request can be equipped with the INVERTERmotion system.
Polyester lifting belts, highly resistant to wear and traction, allow the motor to operate in optimal stress conditions.
Safety is also guaranteed thanks to the sequential barriers, a solution specifically designed to be mounted near the vertical runners which can protect the entire height of the door, up to 2.5 m, and detect people, vehicles and objects within the space, without any contact being necessary.
Product code : LHSDE
Energy
Product Range > Doors
310
PH
HT
200
1000
215190 PL 190
190LT = (PL+ 580)
PH ≤ 4500 PH > 4500700 750
200
600
640
*250
Min MaxPL 900 6000PH 2000 5500
Automation dimensionsKey
PL = Horizontal openingLT = Automation full widthPH = HT = Automation full height
For motor installation:* = 250 mm
Vertical opening
Optional photocell
Optional photocellwith safety package
930
930
930
930
930
930
910
110
PH ≤ 4500 PH > 4500
500
110
12
11
10
9
8
7
6
5
4
3
2
1
500
500
500
500
500
500
500
500
500
380
5500
5000
4500
4000
3500
3000
2500
2000
Modular curtain
7 5500
6 4800
5 3900
4 3000
3 2100
2
1
max 2 (PL ≤ 6000) max 1 (PL ≤ 6000)
≤2250
PL
1 2 3 4
≤3750 ≤5000 ≤6000
Windows
Quantity window sectionsper sector
Windowposition
PHmax PH
maxSectionsposition
Note 1: only the first bottom and last top sections cannot have a window section, irrespective of the number of sectors and PH of the curtainNote 2: with PL < 1100 no window section is available Note: modular PVC see-through section can be placed
on all sections, except the highest
Max. number of optional see-through PVC sections(Sections position selected by customer according to diagram)
DIMENSIONAL SPECIFICATIONS
FULL CURTAIN
57
Product code : LHSDE
Docks1300 780 450
Flexible Flap door
Main technical featuresGalvanized steel or satin-finish AISI 304stainless steel frame for two-wing doors.
Spring closing mechanisms and floordrains with ball-bearings.
RAL coating. Extra charge for smooth,epoxide-powder coating.
FLAP servoassistance electropneumaticand pneumatic devices, consisting of twopneumatic pistons with accessories areavailable in the following types:
CONTACT CT. Push-button, two-directional, pneumatic device (CT with guiding plates and galvanizedsteel casing, CT-Y with special guidingplates and stainless steel casing).
AUTOMATIC AM. Mono-directionalpneumatic device with pneumaticopening and spring closing, includingelectropneumatic control panel (AM withguiding plates and steel casing, AM-Ywith special guiding plates and stainlesssteel casing).
AUTOMATIC AMP. Mono-directionalpneumatic device with pneumaticopening and spring closing, includingpneumatic logic control panel.
Flexible wing doors and flexible strip doors Flap
Easy and functionalFlap is a solid swing door with flexible wings.Thanks to its absolutely reliable structure ithelps to save energy and make passing throughfaster. It is available in the manual version: withmanual wing opening, or in the servo-assistedversion: with pneumatic and electropneumaticfunctioning.A wide choice of flexible curtains is available.
Sturdy and reliablestructure
Its rugged metal structure frame in galvanizedsteel or in stainless steel, consists of a speciallyshaped section which results in a highmechanical strength and elasticity.Reclosing mechanisms consist of a torsion springadjustable system, galvanized fastening plates;revolving floor drains are mounted on ballbearings.It is available in a wide choice of (DIN 4102)totally transparent and self extinguishing,flexible curtains, or coloured PVC or anti-abrasion rubber; frame fastening ends arestrengthened with special polyester, doubleinserts.
Versatile in its threeversions
Flap is available in three versions:Standard, with push manual opening and springclosing.Contact, in semiautomatic version.The door opens by a mechanical piston placedon each wing, applying pressure onto thecurtains; opening is two-directional, closing isby spring.Automatic, with a couple of pneumatic pistonsplaced in a thrust position compared to theopening, which, by means of a remote control(i.e. radar, radio remote controls, etc.) actuatemono-directional wing opening. Closing is by spring. An optional, “double effect” system is alsoavailable, to control opening, closing and stopby pneumatic logic.
Manual FLAP Servo-assisted FLAP
Wall opening widthWall opening heightPneumatic device heightFlap heightAutomation total width Automation total heightHorizontal clear openingVertical clear opening
Contact Ø 50 / Ø 63Contact Ø 80Automatic AM – AMD – AMP Ø 50 / Ø 63Automatic AM – AMD – AMP Ø 80 / Ø 100Automatic AB Ø 63 / Ø 100
CYLINDER
Dimensions
Flexible wing doorFlap
58
Product Range > Doors
Easy and functionalSturdy and reliable structureVersatile in its three versions
Flap is a solid swing door with flexible wings.Helps to save energy and make passing through faster.
StructureIts rugged metal structure frame in galvanizedsteel or in stainless steel, consists of a speciallyshaped section which results in a highmechanical strength and elasticity.
AttainabilityIt is available in a wide choice of (DIN 4102)totally transparent and self extinguishing,flexible curtains, or coloured PVC oranti-abrasion rubber; frame fastening ends arestrengthened with special polyester, doubleinserts.streng thened with special polyester, double inserts.
Versions1. Standard, with push manual opening and
spring closing.2. Contact, in semiautomatic version.
The door opens by a mechanical piston placed on each wing, applying pressure onto thecurtains; opening is two-directional, closing isby spring.
3. Automatic, with a couple of pneumatic pistons placed in a thrust position compared to the opening, which, by means of a remote control actuate mono-directional wing opening.
PVC / ALASKA MIX
TRIS OBLO'
1300
1300
1500
260 260
Flexible wing doors and flexible strip doors Flap
Technical features of thecurtainPVC curtain with strengthened borders,available in the following versions:
Transparent PVC < 3000 thickness = 5 mm,> 3000 thickness = 7 mm
ALASKA PVC, transparent, for very lowtemperatures, thickness = 5 mm
Grey and yellow PVC, flexible curtain,thickness = 5 mm, available in thefollowing versions:- MIX, with lower skirting in painted PVCand transparent upper part - TRIS (with three sections) with lowerskirting and head in painted PVC,transparent central part- OBLO (with portholes) in coloured PVCwith portholes in yellow moplen
Anti-abrasion black rubber flexiblecurtain, with 2 strengthening inserts inMIX and TRIS versions.
Min (mm) Max (mm)
1500 40002500 4500
PLPH
Dimensions 2 wings FLAP Basic
Min (mm) Max (mm)
750 20002500 4500
PLPH
Dimensions 1 wing FLAP Basic
Dimensions Manual FLAP and
Servo-assisted FLAP
1 wing 2 wings
Product code : LFDD (2 wings) LFDS (1 wing)
Flexible Flap door
59
Product Range > Doors
Main technical features and technical features of the curtain
- Galvanized steel or satin-finish AISI 304 stainless steel frame for two-wing doors.
- Spring closing mechanisms and floor drains with ball-bearings.
- RAL coating. Extra charge for smooth, epoxide-powder coating.
- FLAP servo assistance electropneumatic and pneumatic devices, consisting of two pneumatic pistons with accessories are available in the following types:
CONTACT CT. Push-button, two-directional, pneumatic device (CT with guiding plates and galvanized steel casing, CT-Y with special guiding plates and stainless steel casing). AUTOMATIC AM. Mono-directional pneumatic device with pneumatic opening and spring closing, including electropneumatic control panel (AM with guiding plates and steel casing, AM-Y with special guiding plates and stainless steel casing).AUTOMATIC AMP. Mono-directional pneumatic device with pneumatic opening and spring closing, including pneumatic logic control panel.
Curtain informationPVC curtain with strengthened borders, available in the following versions: - Transparent PVC < 3000 thickness = 5 mm,
> 3000 thickness = 7 mm - ALASKA PVC, transparent, for very low
temperatures, thickness = 5 mm - Grey and yellow PVC, flexible curtain,
thickness = 5 mm, available in the following versions:
- MIX, with lower skirting in painted PVC and transparent upper part
- TRIS (with three sections) with lower skirting and head in painted PVC, transparent central part
- OBLO (with portholes) in coloured PVC with portholes in yellow moplen
Anti-abrasion black rubber flexible curtain, with 2 strengthening inserts in MIX and TRIS versions.
PVC / ALASKA MIX
TRIS OBLO'
1300
1300
1500
260 260
Flexible wing doors and flexible strip doors Flap
Technical features of thecurtainPVC curtain with strengthened borders,available in the following versions:
Transparent PVC < 3000 thickness = 5 mm,> 3000 thickness = 7 mm
ALASKA PVC, transparent, for very lowtemperatures, thickness = 5 mm
Grey and yellow PVC, flexible curtain,thickness = 5 mm, available in thefollowing versions:- MIX, with lower skirting in painted PVCand transparent upper part - TRIS (with three sections) with lowerskirting and head in painted PVC,transparent central part- OBLO (with portholes) in coloured PVCwith portholes in yellow moplen
Anti-abrasion black rubber flexiblecurtain, with 2 strengthening inserts inMIX and TRIS versions.
Easy and functionalSturdy and reliable structureVersatile in its three versions
PVC / ALASKA MIX
TRIS OBLO'
1300
1300
1500
260 260
Flexible wing doors and flexible strip doors Flap
Technical features of thecurtainPVC curtain with strengthened borders,available in the following versions:
Transparent PVC < 3000 thickness = 5 mm,> 3000 thickness = 7 mm
ALASKA PVC, transparent, for very lowtemperatures, thickness = 5 mm
Grey and yellow PVC, flexible curtain,thickness = 5 mm, available in thefollowing versions:- MIX, with lower skirting in painted PVCand transparent upper part - TRIS (with three sections) with lowerskirting and head in painted PVC,transparent central part- OBLO (with portholes) in coloured PVCwith portholes in yellow moplen
Anti-abrasion black rubber flexiblecurtain, with 2 strengthening inserts inMIX and TRIS versions.
Docks1300 780 450
Flexible Strip door
60
Product Range > Doors
Quick fastening and high operational flexibility
Product code LDSTPVC
Strip is the simple transparent PVC door, suitable to divide big and small spaces. Passing from one department to another is totally trouble-free and thanks to its high operational versatility. It is equipped with Rapid, the special quick fastening/unlocking system, which allows trouble-free installation, quick unlocking of the strips with the possibility of drawing them to the side and placing them one on top of the other when the door is not used. It helps reduce loss of heat because it opens just enough to let vehicle/people, etc. through.
Main technical features and Strip features
- Special RAPID system, with galvanized steel or AISI 304 stainless steel modular metal structure, enabling trouble-free assembling/disassembling of the strips. This system allows to change strip arrangement according to necessity and in idle periods, side tiding up is possible.
- Flat fitting bearings for under crosspiece fastening or corner fitting bearings for front fastening when no other installation solution is possible.
- Galvanized steel single or double tracks with flat and corner fitting bearings.
- Self-extinguishing PVC, cut-to-measure strips with rounded borders, fastened on special swinging jaws, which, allowing strips to swing, prevent them from being damaged during passing through.
- A wide range of strip arrangement solutions allow to satisfy any installation requirements.
Strip Flexible wing doors and flexible strip doors
Main technical featuresSpecial RAPID system, with galvanizedsteel or AISI 304 stainless steel modularmetal structure, enabling trouble-freeassembling/disassembling of the strips.This system allows to change striparrangement according to necessity and inidle periods, side tiding up is possible.
Flat fitting bearings for under crosspiecefastening or corner fitting bearings forfront fastening when no other installationsolution is possible.
Galvanized steel single or double trackswith flat and corner fitting bearings.
Quick fastening and highoperational flexibility
Strip is the simple transparent PVC door, suitableto divide big and small spaces.Thanks to Strip, company departments can befunctionally separated without loosing luminosity.Passing from one department to another is totallytrouble-free and thanks to its high operationalversatility Strip can satisfy any specialrequirement. You can have it fixed or sliding on astraight-line track.It is equipped with Rapid, the special quickfastening/unlocking system, which allows trouble-free installation, quick unlocking of thestrips with the possibility of drawing them to theside and placing them one on top of the otherwhen the door is not used for a period of time orclosing is not needed. It helps reduce loss of heat because it opens justenough to let vehicle/people, etc. through.
Strip flexible doorsStrip
Wall opening widthWall opening heightTotal widthTotal heightHorizontal clear openingVertical clear openingOverlap
LEGEND
Dimensions
Dimensions Strip flexible doors
Strip Flexible wing doors and flexible strip doors
Main technical featuresSpecial RAPID system, with galvanizedsteel or AISI 304 stainless steel modularmetal structure, enabling trouble-freeassembling/disassembling of the strips.This system allows to change striparrangement according to necessity and inidle periods, side tiding up is possible.
Flat fitting bearings for under crosspiecefastening or corner fitting bearings forfront fastening when no other installationsolution is possible.
Galvanized steel single or double trackswith flat and corner fitting bearings.
Quick fastening and highoperational flexibility
Strip is the simple transparent PVC door, suitableto divide big and small spaces.Thanks to Strip, company departments can befunctionally separated without loosing luminosity.Passing from one department to another is totallytrouble-free and thanks to its high operationalversatility Strip can satisfy any specialrequirement. You can have it fixed or sliding on astraight-line track.It is equipped with Rapid, the special quickfastening/unlocking system, which allows trouble-free installation, quick unlocking of thestrips with the possibility of drawing them to theside and placing them one on top of the otherwhen the door is not used for a period of time orclosing is not needed. It helps reduce loss of heat because it opens justenough to let vehicle/people, etc. through.
Strip flexible doorsStrip
Wall opening widthWall opening heightTotal widthTotal heightHorizontal clear openingVertical clear openingOverlap
LEGEND
Dimensions
Flexible Strip door
61
Product Range > Doors
Strip Flexible wing doors and flexible strip doors
Within doorway installation Rapid system with flat fitting bearings
Strip height
Strip height
Rapid system with flat bearing track
Rapid system with corner fitting bearings Rapid system with corner bearing track Outside doorway installation
Strip height
Strip height
Strip featuresSelf-extinguishing PVC, cut-to-measurestrips with rounded borders, fastened onspecial swinging jaws, which, allowingstrips to swing, prevent them from beingdamaged during passing through.
A wide range of strip arrangementsolutions allow to satisfy any installationrequirements.
Types of installationTypes of installation
Strip Flexible wing doors and flexible strip doors
Within doorway installation Rapid system with flat fitting bearings
Strip height
Strip height
Rapid system with flat bearing track
Rapid system with corner fitting bearings Rapid system with corner bearing track Outside doorway installation
Strip height
Strip height
Strip featuresSelf-extinguishing PVC, cut-to-measurestrips with rounded borders, fastened onspecial swinging jaws, which, allowingstrips to swing, prevent them from beingdamaged during passing through.
A wide range of strip arrangementsolutions allow to satisfy any installationrequirements.
Types of installation
Strip Flexible wing doors and flexible strip doors
Main technical featuresSpecial RAPID system, with galvanizedsteel or AISI 304 stainless steel modularmetal structure, enabling trouble-freeassembling/disassembling of the strips.This system allows to change striparrangement according to necessity and inidle periods, side tiding up is possible.Flat fitting bearings for under crosspiecefastening or corner fitting bearings forfront fastening when no other installationsolution is possible.Galvanized steel single or double trackswith flat and corner fitting bearings.
Quick fastening and highoperational flexibilityStrip is the simple transparent PVC door, suitableto divide big and small spaces.Thanks to Strip, company departments can befunctionally separated without loosing luminosity.Passing from one department to another is totallytrouble-free and thanks to its high operationalversatility Strip can satisfy any specialrequirement. You can have it fixed or sliding on astraight-line track.
It is equipped with Rapid, the special quickfastening/unlocking system, which allows trouble-free installation, quick unlocking of thestrips with the possibility of drawing them to theside and placing them one on top of the otherwhen the door is not used for a period of time orclosing is not needed. It helps reduce loss of heat because it opens justenough to let vehicle/people, etc. through.
Strip flexible doors
Strip
Wall opening widthWall opening heightTotal widthTotal heightHorizontal clear openingVertical clear openingOverlap
LEGEND
Dimensions
Docks1300 780 450
Product Range > Doors
Safety and control systems Strip and Flap doors
62
RMM - Microwave radar with function discrimination: vehicle – pedestrian crossing direction
TEL 2 - Remote control for RMM radar adjustment
BIX LP2 - Self-learning, two-channel mini radio remote control
BIX LP2P - 433 MHz, two-channel, push-button remote control
LAB 9CS
Flexib
le wi
ng d
oors
and
flexib
le str
ip d
oors
Flap
Str
ipC
od. A
107B
- 02
/05
- Fla
p St
rip -
Fle
xible
win
g do
ors
And
flexib
le s
trip
door
sA
- 558
65
Use only DITEC accessories and safety devices for automation system installation.
DITEC actuators are CE-marked. They are designed and built in compliancewith the safety requirements defined in the Machinery Directive (98/37/EC),Electromagnetic Compatibility Directive(89/336/EEC) and Low-Voltage Directive(73/23/EEC). DITEC S.p.A. reserves the right to make any changes whatsoever inorder to upgrade its products.
Ditec products are constantly improved. As a consequence, technical data as listed inthis leaflet are not to be considered binding. Further information can be found inour technical manuals, available on thewebsite www.ditec.it
Regulations
DITEC BELGIUM LOKEREN Tel. +32 9 3560051 Fax +32 9 3560052 www.ditecbelgium.beDITEC DEUTSCHLAND OBERURSEL Tel. +49 6171914150 Fax +49 61719141555 www.ditec-germany.deDITEC FRANCE PALAISEAU Tel. +33 1 64532860 Fax +33 1 64532861 www.ditec.frDITEC SVIZZERA BALERNA Tel. +41 91 6463339 Fax +41 91 6466127 www.ditecswiss.chDITEC AMERICA ORLANDO-FLORIDA-USA Tel. +1 407 8880699 Fax +1 407 8882237 www.ditecamerica.com
DITEC S.p.A.Via Mons. Banfi, 3 - 21042 Caronno Pertusella (VA) - ITALYTel. +39 02 963911 - Fax +39 02 9650314www.ditec.it - ditec@ditecva.com
XEL 2
RMM - Microwave radar with function discrimina-tion: vehicle – pedestrian crossing direction
TEL 2 - Remote control for RMM radar adjustment
BIX LP2 - Self-learning, two-channel mini radioremote control
BIX LP2P - 433 MHz, two-channel, push-buttonremote control
LAB 9CS
LAMP H - 24 V flashing beacon
XEL 2 - Infra-red photocell for outdoor installation,general use
APS - Automatic anti-panic system
INVERTER - Electronic control panel with speedadjustment
Safety and control systems
APS INVERTER
BIX LP2 BIX LP2P
RMM TEL 2
LAB 9CS
LAMP H
LAMP H - 24 V flashing beacon
XEL 2 - Infra-red photocell for outdoor installation, general use
APS - Automatic anti-panic system
INVERTER - Electronic control panel with speed adjustment
Flex
ible
win
g do
ors
and
flexi
ble
strip
doo
rsFl
ap S
trip
Co
d.
A10
7B -
02/0
5 -
Flap
Str
ip
- Fl
exib
le w
ing
doo
rs A
nd f
lexi
ble
str
ip d
oors
A-
5586
5
Use only DITEC accessories and safety devices for automation system installation.
DITEC actuators are CE-marked. They are designed and built in compliancewith the safety requirements defined in the Machinery Directive (98/37/EC),Electromagnetic Compatibility Directive(89/336/EEC) and Low-Voltage Directive(73/23/EEC). DITEC S.p.A. reserves the right to make any changes whatsoever inorder to upgrade its products.
Ditec products are constantly improved. As a consequence, technical data as listed inthis leaflet are not to be considered binding. Further information can be found inour technical manuals, available on thewebsite www.ditec.it
Regulations
DITEC BELGIUM LOKEREN Tel. +32 9 3560051 Fax +32 9 3560052 www.ditecbelgium.beDITEC DEUTSCHLAND OBERURSEL Tel. +49 6171914150 Fax +49 61719141555 www.ditec-germany.deDITEC FRANCE PALAISEAU Tel. +33 1 64532860 Fax +33 1 64532861 www.ditec.frDITEC SVIZZERA BALERNA Tel. +41 91 6463339 Fax +41 91 6466127 www.ditecswiss.chDITEC AMERICA ORLANDO-FLORIDA-USA Tel. +1 407 8880699 Fax +1 407 8882237 www.ditecamerica.com
DITEC S.p.A.Via Mons. Banfi, 3 - 21042 Caronno Pertusella (VA) - ITALYTel. +39 02 963911 - Fax +39 02 9650314www.ditec.it - ditec@ditecva.com
XEL 2
RMM - Microwave radar with function discrimina-tion: vehicle – pedestrian crossing direction
TEL 2 - Remote control for RMM radar adjustment
BIX LP2 - Self-learning, two-channel mini radioremote control
BIX LP2P - 433 MHz, two-channel, push-buttonremote control
LAB 9CS
LAMP H - 24 V flashing beacon
XEL 2 - Infra-red photocell for outdoor installation,general use
APS - Automatic anti-panic system
INVERTER - Electronic control panel with speedadjustment
Safety and control systems
APS INVERTER
BIX LP2 BIX LP2P
RMM TEL 2
LAB 9CS
LAMP H
Flexib
le wi
ng do
orsan
d flex
ible s
trip d
oors
Flap
Stri
pC
od. A
107B
- 02
/05
- Flap
Stri
p -
Flex
ible
win
g do
ors
And
flexib
le st
rip d
oors
A- 5
5865
Use only DITEC accessories and safety devices for automation system installation.
DITEC actuators are CE-marked. They are designed and built in compliancewith the safety requirements defined in the Machinery Directive (98/37/EC),Electromagnetic Compatibility Directive(89/336/EEC) and Low-Voltage Directive(73/23/EEC). DITEC S.p.A. reserves the right to make any changes whatsoever inorder to upgrade its products.
Ditec products are constantly improved. As a consequence, technical data as listed inthis leaflet are not to be considered binding. Further information can be found inour technical manuals, available on thewebsite www.ditec.it
Regulations
DITEC BELGIUM LOKEREN Tel. +32 9 3560051 Fax +32 9 3560052 www.ditecbelgium.beDITEC DEUTSCHLAND OBERURSEL Tel. +49 6171914150 Fax +49 61719141555 www.ditec-germany.deDITEC FRANCE PALAISEAU Tel. +33 1 64532860 Fax +33 1 64532861 www.ditec.frDITEC SVIZZERA BALERNA Tel. +41 91 6463339 Fax +41 91 6466127 www.ditecswiss.chDITEC AMERICA ORLANDO-FLORIDA-USA Tel. +1 407 8880699 Fax +1 407 8882237 www.ditecamerica.com
DITEC S.p.A.Via Mons. Banfi, 3 - 21042 Caronno Pertusella (VA) - ITALYTel. +39 02 963911 - Fax +39 02 9650314www.ditec.it - ditec@ditecva.com
XEL 2
RMM - Microwave radar with function discrimina-tion: vehicle – pedestrian crossing direction
TEL 2 - Remote control for RMM radar adjustment
BIX LP2 - Self-learning, two-channel mini radioremote control
BIX LP2P - 433 MHz, two-channel, push-buttonremote control
LAB 9CS
LAMP H - 24 V flashing beacon
XEL 2 - Infra-red photocell for outdoor installation,general use
APS - Automatic anti-panic system
INVERTER - Electronic control panel with speedadjustment
Safety and control systems
APS INVERTER
BIX LP2 BIX LP2P
RMM TEL 2
LAB 9CS
LAMP H
Scissor Lift - Standard
Product Range > Materials Handling
Multiple pallet lifting solutionHeavy duty cycles
Multiple configurations available
Required Parameters
Load / CapacityPallet quantityPlatform sizeVertical travelPit / No pitOverall heightsSingle Phase (smaller tables) or3 Phase (10-12 cycles/hour)
Design
Scissor mechanism with on-board or remote power pack and platform that can be used to elevate multiple pallet loads of goods between a dock and a vehicle.Scissor Lift tables are also specified in floor to floor applications where single or multiple pallet loads or equipment are being transferred.Safety bar is included in all tables as a no cost extra.
Options
Variable platform sizes.External and remote power packs.IP 56 electrical fittings.Hinged flaps. (manual & powered - interlock option)Boom gates. (1.8M max - interlocked)Fork sockets.Different platforms including chequerplate, special paints and stainless steel skins.Galvanised finish available. (small platforms only)Safety skirts.Air motors.Tandem tables.Lifting lugs.All Leda lift tables are manufactured to AS1418.8 & AS1418.1.
63
Docks1300 780 450
Scissor Lift - Shallow
Product Range > Materials Handling
Shallow profile elmiinates the need for pitSimple existing slab installation
Single pallet, 1 tonne capacity (standard)Low height 40mm profile
Push button or remote operationHydraulic actuationHigh duty cycle applicationsIntegrated safety bar
OptionsExternal and remote power packs.IP56 electrical fittings.Different platforms including chequerplate, special paints and stainless steel skins.All Leda lift tables are manufactured to AS1418.8 & AS1418.1
64
Scissor Lift - Accessories
Product Range > Materials Handling
IP56 ELECTRICAL INSTALLATIONElectrics to IP56 degree of protection(to AS1939) for outdoor orwashdown applications
SKIRTConcertina skirt made fromreinforced vinyl with stiffening rodsto prevent ingress into mechanism.
SINGLE PHASE / THREE PHASELift tables may be supplied in eithersingle or three phase.
PLATFORM SIZEStandard platform available ex stock. Non-standard platforms can be built to client’s spec.
FORKLIFT SOCKETS AT THE SIDESForklift sockets can be welded to thesides of the base frame of the lift table for easier relocation.
GALVANISED PLATFORMEntire platform can be hot dippedgalvanised for enhanced durability& corrosion resistance.
FORKLIFT SOCKETS UNDERNEATHForklift sockets can be incorporatedinto the base frame for easyrelocation of the lift table.
TANDEM TABLESMost models available in tandemconfiguration. Ideal for handlinglonger loads & higher capacity.
SPECIAL PAINTStandard enamel finish is red withyellow safety bar. Special colours orpaint formulations can be provided.
EXTERNAL POWER UNITSHydraulic power unit can be externalto the lift table, connected via ahydraulic hose.
CHEQUERPLATE PLATFORMChequerplate platform forpedestrian non-skid surface.
HINGED FLAPSHinged flaps can be fixed to theplatform to span the gap betweenthe platform & the pit edge.
ACCESS HATCHAccess hatch in the platform allowsfor maintenance access to powerunit when the lift table is fully lowered.
LIFTING LUGSScrew in lifting lugs for easierinstallation, especially for installinginto a pit. (removable)
PERSONNEL LIFTINGIncludes handrails, gates, safetyinterlocking & on-board controls.
65
Docks1300 780 450
Freight Hoists No pit required, custom sizes availableEasy to use, install & maintain
Suitable for
FactoriesWarehousesMezzanine floor accessSelf storageRetail centresCommercial buildings
Specifications
2 positionNo pit requiredPush button operationSafe & simpleLow 45mm profileHydraulic flow control safety (standard)
Features
Freight only orFreight + Personnel (with comms)Capacities 500 to 4,000 kgTravel up to 7,000 mmVariable platform sizeFreestanding (clad) orIn existing ShaftNo pit requiredClad/unclad
Designed & manufactured in Australiain accordance with OH&S &Australia Standards
Product Range > Materials Handling
66
67
Contact Us
The Leda Advantage
Email : sales@ledasecurity.com.auWeb : www.ledasecurity.com.au
NSW Sales8/185 Briens Rd Northmead NSW 2152PO BOX 128 Wentworthville NSW 2145 Australia Phone : (02) 8413 3410 Fax : (02) 8677 7119
VIC Sales2/89 Enterprise Way, Sunshine West VIC, 3020PO Box 1091, Sunshine West, VIC, 3020 Australia Phone : (03) 8399 8150 Fax : (03) 9315 1085
QLD SalesUnit 2/ 387 Lytton Road Morningside QLD 4170PO Box 186 Morningside QLD 4170 Australia Phone : (07) 3613 8270 Fax : (07) 3399 5688
SA Sales1/5 Tooronga Ave Edwardstown SA 5039 Australia Phone : (08) 8374 3266 Fax : (08) 8374 3299
Perth Sales1/3 Finance Place Malaga WA 6090 Australia Phone : (08) 6430 1670 Fax : (08 ) 9209 2860
Head Office & ManufacturingAddress: 18 Reliance drive Tuggerah NSW 2259PO Box 5196 Chittaway Bay NSW 2261 Australia Phone : (02) 8413 3430 Fax : (02) 4353 2255