Post on 15-Jan-2015
description
Launching the Job Plan May 20132
What we’ll cover
• Running the Accolo network search
• Priming the pump
• Configuring job board postings
• The launch
• Social networking
Launching the Job Plan May 20133
Trigger to launch
• HM has approved the job plan
• HM is ready to interview candidates
• You have completed all of the requested changes
Launching the Job Plan May 20134
Using the Accolo network search
When running the referral search engine (RSE), you should:
• Run the referral search for the first time after the HM approves the Job Plan •Emails are auto-sent at 6:00 am and 6:00 pm PST
• Limit the initial launch to about 100 people•Contact a maximum of 500 people during the life
cycle of the job through the referral search
• If candidates pulled are not your target: •Remove them, consider changing the profile
Launching the Job Plan May 20135
Priming the Pump
• 6 hours either side of launch find 10 good candidates and call or email them
• Where to find them:
•Accolo network search
• Job boards, LinkedIn, etc.
•Professional organizations, user groups, etc.
Launching the Job Plan May 20136
Job Board Postings
• The system can post to major job boards
• Every position should be posted on at least 3 job boards
• Technical jobs are posted on Dice.com
• Sales jobs are posted on Salesjobs.com
• Postings MUST be configured and posted in the system prior to launching the job
craigslist
Launching the Job Plan May 20137
Launching the job
• Select “Launch Job”
• The job status will then show “Active”
Launching the Job Plan May 20138
Social Networking
Launching the Job Plan May 20139
Review
Launching the Job Plan May 201310
Review questions
• What are some actions involved when launching the Job Plan?
• What is the Accolo network search and what does it do?
• What do we mean by “Priming the Pump” and why do we do it?
• Which boards are all Accolo jobs posted to?
• What are the niche sites for sales and tech jobs?