IOT QUICK DEMO SALESFORCE

YOU HAVE TO INSTALL HEROKU APPLICATION AT FIRST!!!!!!

The following site has the latest information so please

check this out at first.

http://itodemo-developer-edition.ap0.force.com

Agenda

1. Installation

2. Temperature demo

• Setup

• Scenario

3. Location demo

• Setup

• Scenario

4. Optional Features

• Twilio integration

• Android device

System Overview

Heroku

App

Send value, lat, lon,

and timestamp to

heroku app every 3

secs

Pusher

Add-on

Forward values to

SFDC

Streaming API

websocket

SFDC

1. INSTARALLTION

http://itodemo-developer-edition.ap0.force.com/

2

1

Before you click this Heroku button, you must have your

developer account on Salesforce for free. If not, go to

https://developer.salesforce.com/signup to sign-in

Copy this url and paste it at your browser to install

salesforce application.

Ener your Salesforce userid and password

3

2

1

3 4

1

1

3

This is your own application url. Please make

sure that it looks like

https://<yourapp>.herokuapp.com

This is your application url you should copy

2

2

1

3

4

5

2

1

3

Enter your office location for now.

Check http://mygeoposition.com/ to get

value

4

2

1

3

Add two columns to User layout

4

2

1

3

Enter your own heroku application url

2

1

3

Add FindSupportPerson VF to case layout

2

1 3

5

4

1

Your Salesforce username and password

2. TEMPERATURE DEMO

SET UP

1

2

3

1

This page is device detail page showing

sensor value, location, and so on

2

1

In case value from device is over this

threshold, then the app automatically create

a case and post content based on this

setting values.

2

1

3

Enter your any location near the place

where you are for demo

Check http://mygeoposition.com/ to get

value

4

2

1

3

Enter you email address which your mobile

can receive.

4

Web based device UI app is on

iphone/android

SCENARIO

Steps1. Map showing where you are for demo because device

sends geo-location, temperature data to SFDC every

3secs

2. Gauge showing current temperature at device. It has

time difference because of device -> Heroku -> SFDC -

> Gauge UI. You may change temperature value on

device ( not exceed threshold value you set )

3. Send signal to device by switching button via Web-

socket.

4. Show historical data

5. Change temperature value over threshold so that

Chatter post and case are automatically created.

6. Show the case and the Chatter post

This geo-location comes form web based

device UI app gets value from

iphone/andorid.

2

1

You can see when the data got arrived from

device. Streaming API is implemented here.

You can change temp value here but not

one over 40 degree which is threshold.

2

1

You can switch on / off at Salesforce UI and

sends a signal to device via Websocket

It shows historical data but you need to

refresh page if you show new data set.

All data from device are stored at

SensorData custom object

There is no case here.

2

1

3

Change value so that it is over threshold

Refresh the page

You can change subject of content. Please

see demo setting section.

'SELECT Id,Department,Division,Email,Name,Phone,Location_Map__c FROM User WHERE DISTANCE(User_Location__c, GEOL

OCATION('+record.Location__Latitude__s+','+record.Location__Longitude__s+'), \'mi\') < 50';

This shows users who are within 50 mills

against device location.

2

1

Chatter post is created.

3. LOCATION DEMO

Use caseWhen our device (car, sensor, and so on) is stolen, then

case and chatter post is created to notify employee.

The demo shows you if the difference between the place

where device was located at previous time and one where

it is located now is over 10 mils, then case and chatter are

created.

SETTING

1

Change lat and long values indicating any place from

where you are for demo to 10mil away.

SCENARIO

All data from device are stored at

SensorData custom object

There is no case here.

2

1

3

Opening Web-based device UI sends geo-

location to SFDC

Refresh the page

You can change subject of content. Please

see demo setting section.

'SELECT Id,Department,Division,Email,Name,Phone,Location_Map__c FROM User WHERE DISTANCE(User_Location__c, GEOL

OCATION('+record.Location__Latitude__s+','+record.Location__Longitude__s+'), \'mi\') < 50';

This shows users who are within 50 mills

against device location.

2

1

Chatter post is created.

4. OPTIONAL FEATURES

TWILIO INTEGRATION

1

4

3

2

https://github.com/twilio/twilio-salesforce

tells you how to get account, token, to, and

from values.

1

2

Uncomment out this line for calling

3

2

1

1

Edit twilio content field for call. In case

temperature value goes up the threshold,

then case and chatter post are created and

you will get a call with this content.

ANDROID DEVICE

Use caseIf you have Android smart phone by yourself, you can give

more features using js device api.

(http://blog.teamtreehouse.com/exploring-javascript-device-

apis)

• SFDC UI can make Web-based device UI vibrated

• SFDC UI can get battery level from Android smart phone

• Web-based device UI gives real ambient light level to SFDC

• YOU NEED Firefox on Android Smart Phone

2

1

3

Enter you email address which your mobile

can receive.

4

Web based device UI app is on android

Thing’s record type must be Android

1

3

2

Throw light on android smart phone to

change this value