Post on 04-Nov-2019
Introducing the new I-130 Impact crusher –the most advanced mobile tracked crusher forquarried rock, recycling & demolitionapplications!
Reliability,Performance & Simplicity...
The direct drive system, independent hydraulic pre-screen, and under-
crusher vibratory feeder option allow the I-130 to deliver maximum
performance and efficiency, reducing downtime- whatever the application.
With robust construction, fast set up/ tear down times, simple control
processes- the system is rapidly mobile and easy to use.
The machine is fitted with a large
9m³ (11.7yd3) hydraulic folding
hopper as standard. The hopper is
fitted with a 1.25m x 1.05m (8’6” x
3’5”) hydraulic drive, variable speed
vibrating grizzly feeder. The
standard grizzly bar spacing is
50mm (2”), with 3 other sizes
available as options.
Hopper and Feeder
At A Glance:Pre-screen system
I-130 Impact Crusher
At A Glance� Terex® Cedarapids IP1313 Impact Chamber
� Direct drive to impact chamber via fluid coupling ‘V’ Belts
� Hydraulically assisted apron setting
� Cat C13 324kW (440HP) water cooled engine
� 9m³ hopper capacity (11.7 yd³)
� Heavy duty stepped grizzly feeder with integral pre-screen
� Under Crusher Feeder complete with wear resistant liners
� Selectable discharge to by-pass conveyor or main conveyor
� Two speed tracks with ‘soft’ start
� Overband magnet optional
� By-pass conveyor optional
� Full length main conveyor
� No under crusher feeder - full belt option
Independent pre-screen systemMaterial is screened by the grizzly feeder before
entering the impact chamber, maximising plant
throughput. Fines material can be directed to the
optional by-pass conveyor, or onto the main conveyor.
An optional independent hydraulic prescreen is also
available.
With the 1270mm x 1220mm (50” x 48”) impact chamber at
the core of the machine there is a proven track record on
performance- offering high throughput capacity and
excellent reduction. The chamber is supplied with a 4
bar rotor as standard, with a 2 high/2 low
configuration with tool steel bars. Other options are
available to suit various applications- 4 high bars, 3 bar
rotor, high chrome, ceramic, etc.. The chamber has a
hydraulic assisted setting feature which makes adjustment
of the aprons easy.
The advanced electronic control system monitors and controls the
speed of the rotor. Five pre-set speeds can be selected to suit your
application. The system also regulates the feeder to ensure the consistent feed of material into the crusher
chamber maintaining optimal crushing conditions.
Powerunit� CAT C13 328kW (400HP)� Direct drive via fluid coupling� Electronic control system� Catwalk access
Product Conveyor� 1000mm (40”) Belt� 3.7m (12’ 1”) Discharge� Hydraulic folding for transport
Magnet� Optional
STANDARD FEATURES:
Engine:- Caterpillar C13 328kW (440hp)
Impact Chamber:- Cedarapids IP1313 Impact chamber (4 bar rotor) toolsteel blow bars- Direct Drive via fluid coupling V-Belts- Hydraulically assisted apron setting
Hopper / Feeder:
- 9m³ hopper capacity (11.7 yd³ )- Hydraulically folding sides- Heavy duty vibrating feeder- Stepped grizzly feeder with integral pre-screen, standard 50mm (2”) spacing- Selectable discharge to by-pass conveyor or main conveyor- Mesh aperture on grizzly feeder: 38mm (1.5”)
Main Conveyor:- Skirting and partial dust covers on discharge conveyor- 1000mm (40") belt- High spec scraper at head drum- Under Crusher Feeder complete with wear resistant liners.
General:- Piped for dust suppression- Piped for overband magnet- Two speed tracks with 'soft start'0- Hydraulic oil temperature sensor- Control operation of tracks via hand held set with 5m (200”) connection lead- Guards to M & Q specification- Low level greasing- Galvanised catwalk c/w handrail, kick board and access ladders- Heavy duty undercarriage unit with 500mm (20”) wide pads- Emergency stops (6 nr)
Impact Chamber
I-130 Impact CrusherHooper and feeder Rotor Size:
Net EnginePower:
Portability:
Operating Weight:
1270 x 1219mm50” x 48”
328kW @1700 rpm
Tracked
49,000kg108,026lbs est
� 9m³ (11.7yd³) Capacity� Hydraulic folding
Impact Chamber� Ø1270mm x1220mm (Ø50” x 48” ) rotor� Direct drive � Hydraulic assist setting
Catwalks� Powerunit and chamber access Independent Hydraulic Pre-screen
� Optional - For increased fines removal
By-pass conveyor (option)
� Via fluid coupling and ‘v’ belt� Increased operating efficiency
Direct Crusher Drive
Under-crusher vibratory feeder
Tracks� 3.78m (12’ 5”) Sprocket centresChassis
� Robust, heavy duty chassis
� 650mm (26”) belt width� 2.1m (6’ 10”) discharge height� 2.9m (9’ 6”) discharge option available
� Full belt option also available
OPTIONAL EQUIPMENT FEATURES:- Radio remote System: Operational controls of machine (auto start/stop) & track
movement- Bypass conveyor with 650mm (26”) wide plain belt- Extended bypass conveyor with 650mm (26”) wide plain belt- Over band magnet (250mm (10”) suspension height)
c/w stainless steel skirting & stainless steel discharge chute- Heavier duty overband magnet (skirting & chute as above)- Manual gantry for assisting blow bar change- Belt weigher- 1 nr stockpiler drive - Tracked & wheeled version (detachable bogie unit) c/w light board- "Bogie Prepared"- Special paint colour (if different from Finlay Orange RAL 2002)- Additional dust cover on discharge conveyor- Hydraulically driven water pump- Independent pre-screen- Re-circulation conveyor
(for 694 application, NB 694 requires special OS+ conveyor)
- Optional spacing on grizzly, 25mm/75mm/100mm (1”/3”/4”)- Lighting mast- 5" high chrome impact bars (3 bar rotor)- 5" high chrome impact bars (4 bar rotor)- 3 bar rotor - Hot climate lubrication kit- Hot climate cooler pack- Cold Climate lubrication kit- Full length main conveyor
Customers First AlwaysService & SupportAt Terex® Finlay our commitment to youextends far beyond the initial sale. Terex®Finlay dealers are committed tosupporting every aspect of your operation,from commissioning & servicingequipment helping you improveproductivity and lower operating coststhroughout the working life of yourmachine.
TrainingTerex® Finlay offers operator & servicetraining opportunities and tools. We valueyour time and your bottom line. Ourcourses are designed to deliver concise,comprehensive training to support both.
PartsYour local Terex® Finlay dealer aims tokeep you moving 24 hours a day, 7 days aweek, 365 days a year. Whether you needjaw liners, meshes or replacementcomponents, only genuine Terex® Finlayparts guarantee the safety, proper
functioning and reliability of yourequipment. Terex® Finlay
supplies quality originalparts to protect yourinvestment and our
knowledgeable productspecialists help ensureyou receive exactlywhat you need to getyour equipment back
on the job quickly &cost effectively.
WarrantyWe build long-lasting quality into each ofour products and are proud to offeroutstanding warranty coverage as ourcommitment to you. Subject to our salesterms and conditions all new Terex®Finlay products carry a12 monthwarranty.
J-1480 Jaw Crusher, I-130 Impact Crusher, 984 Horizontal Screen and C-1540RS working in sequence
Combination Plants
R
Transport Position
Working Position
Note: Illustrated with optional extended by-pass conveyor magnet and independ-ent hydraulic prescreen.
kg16m (52’ 6”) 14.7m (48’ 3”) 2.9m (9’8”)3.8m (12’6”)6.0m (15’5”)4.1m (13’5”)
Working Height Working Length Working Width Transport Height Transport Length Transport Width Weight
49,000 Kg180,026 lbs
Effective 20. 02. 2009. Product specifications and prices are subject to change withoutnotice or obligation. The photographs and/or drawings in this document are for illustrativepurposes only. Refer to the appropriate Operator’s Manual for instructions on the properuse of this equipment. Failure to follow the appropriate Operator’s Manual when using ourequipment or to otherwise act irresponsibly may result in serious injury or death. Theonly warranty applicable to our equipment is the standard written warranty applicable tothe particular product and sale and Terex makes no other warranty, express or implied.Products and services listed may be trademarks, service marks or trade-names of TerexCorporation and/or its subsidiaries in the USA and other countries. All rights are reserved.Terex® is a registered trademark of Terex Corporation in the USA and many othercountries.
Copyright 2009 Terex Corporation.
Drumquin Road, Omagh Co. Tyrone N.Ireland BT78 5PN Tel: + 44 (0) 28 82 418 700 Fax: + 44 (0) 28 82 244 294 E-mail: sales@terexfinlay.com Web: www.terexfinlay.com
Terex USA, LLC909 17th Street NECedar Rapids, IA 52402 USATel: +1 (800) 821-5600 or +1 (319) 363-3511Fax: +1 (319) 399-4871E-mail: info@cedarapids.comWeb: www.terexfinlay.com