Post on 03-Dec-2021
00
2
Contents
1 Before You StartImportant Safeguards 4About this manual 4Precautions 5Maintenance 6Location & function of the controls 7Remote control 9 Specifications 11
InstallationWiring Connections Installation Detach the Unit Cleaning the Connector
1213
1516
Common Operations17
1717
1717
1818
Clear
1818
1818
Release the front panel 18
Reset the Unit Turning the Unit On/Off Volume Control Setting the Sound Characteristics EQ Setting Turning Loudness On/Off Mute Function
Night ModeMode Selector Display Mode Infrared Sensor A/V In
18 Force Disc Out 18
18
Main MenuMain Menu Setup 19 Audio Adjust 19Video Adjust 20Source Setup 21Others 22
DVDBasic Operation of DVD Playing the Previous/Next Track Playing the Track F.F/F.REW Stop the Playback Slow Motion Playback System Button Increase Picture Size Pause the Playback Number Buttons Repeat Playing On Screen Display Setting the Playing Time Changing the Viewing Angle Changing Audio Language Changing the Subtitle Language Selecting Different Menu/Title Set Up Menu
2323
2323
2323
2323
2424
2424
2425
2525
25
5
6 VCD/CD/MP3/MPEG-4/USB/SDPlaying Discs/USB/SD Playing the Previous/Next Track Playing the Track F.F/F.REW
Playing Tracks in Random Order Stop the Playback
3232
32System Button 32Repeat Playing 32
3232
7 IPODIPOD play Playing the Previous/Next Track Playing the Track F.F/F.REW
Playing Tracks in Random Order Pause the Playback On-Screen Display
Back to Root Directory Back to the previous Directory
Exit IPOD
3636
36Repeat Playing 36
363636
Tracks Selector 3737
37Video or Picture Mode 37
37
00
3
Contents
TunerBand Selector Manual/Automatic Tuning Selecting the Station DX/LOC Selector MO/ST Selector On-screen Display Scanning/Memorizing Stations Automatically Number Buttons Selecting Station Directly
3838
3838
3838
3939
39Radio Menu 40
8
9 Additional Information Simple Troubleshooting Guide 41
Pause the Playback Changing Audio Language(Multi-audio) File Selector Eject a Disc Slow Motion Playback Picture Sizes On-Screen Display
Program Playing
3333
3333
3333
33Number Buttons 34Setting the Playback Time 34MO/ST Selector 34
34Playing PBC (Menu) 34To Capture Picture 35
35Exit a SD Card 35Exit an USB
09Before You Start
IMPORTANT SAFEGUARDS About this manual
1. Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage
, the vehicle s electrical system.
2. Be sure to connect the speaker (-) leads to the speaker (-) terminal. Never connect the left and right channel speaker cables each other or to the vehicle body.
3. Make sure all the connections are completely correct before turning on your unit.
4. When replacing the fuse(s), the re- placement must be of the same am- perage as shown on the fuse holder. 5. Do not block vents or radiator pa- nels. Blocking them will cause heat to build up inside and may result in fire.
6. After completing the installation and beginning to play the unit(including replacing the battery), please remove the front panel at first, and then press RESET button on the base with pointed object (such as ball-point pen) to set the unit to initial status.
This unit features a number of sophisti-
cated functions ensuring superior
operation. All the functions have been
designed for the easiest possible use,
but many are not self-explanatory. This
manual will help you understand the
functions and operations of the unit.
This manual main explains remote
control operation. However, in
addition to those functions related with
DVD/VCD/CD/MP3/MEPG-4/USB
operation that can only be operated by
the remote control, there are also
functions can be operated by the buttons
provided for the main unit.
41
Additional Information
Simple Troubleshooting Guide
No power. Check and make sure whether the fuse is blown, replace with the proper value if necessary.
Some errors occur in LCD or no function pressing the button.
the when
Unable to receive stations.
Poor effect on receiving a station.
CDs cannot be loaded.
Sound skips.
No images.
Images skip.
Press RESET button.
Check and make sure whether the antenna is inserted or the antenna is properly connected, if not, insert the antenna or connect it properly.
Antenna may not be the proper length. Make sure the antenna is fully extended; if broken, replace the antenna with a new one.
A CD is loaded in the mechanism.
The CD is dirty or damaged.
The Video line from main unit to the TV is not connected properly.
Improper setting of the color system. Set the color system according to the connected television.
to PAL or NTSC
.
.
.
Note: If any of the problem persist after check list had been made, consult your nearest service dealer. Never attempt to disassemble your unit by yourself.
The following checklist might help to solve the problems which you meet when usingthe unit. Please double check and make sure if the connection and the procedure ofthe operation is properly before using the checklist .below
Problem Cause/Solution
.
..
.
.The antenna is poorly grounded, check and makesure the antenna is properly grounded at its mounting location.
.
Due to continuous product improvement, the operations are subject to run the model.
01
5
Before You StartTuner
40
08
Handle the disc by its edge to keep
the disc clean, and do not touch
the surface.
Do not attempt to modify the unit, modifying the unit may cause an accident.
Stop the vehicle before carrying out any operation that could interfere with your driving.
Do not work in extremely high or low temperature. Be sure the temperature inside the vehicle is between +60 C and -10 C before turning on your unit . To enjoy optimum sound and images while playing, handle the discs as follows:
Do not use your CDs with paste residue
or ink attached.
Do not use CDs with labels or stickers
attached, which may leave a sticky residue
while beginning to peel off.
(Shown as the picture)
Clean the discs with an optional clean-
ing cloth. Wipe each disc from the center out.
(Shown as the picture)
PRECAUTIONS
This unit can play the following discs only:
Type of disc
VCD
12cm
MP3
12cm
CD 12cm
NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVCD disc.
12cm
DVD
Label on the disc Recorded material
Sound and moving pictures
Sound and moving pictures
Sound only
Sound only
Size of disc
MPEG-4 Sound and moving pictures
12cmMPEG-4
USB Sound and moving pictures
Version 2.0 and less
Radio Menu
Press SETUP button, the monitor shows the radio setup menu, you can press [ ][ ][ ][ ] to select your desired item, then press ENTER on the remote control. Press , or to select EXIT, then press ENTER to exit the setup.
22
21
Note:
* Rotate VOL and briefly press it on the head
unit also performs the same function.
RADIO MENU
AREA
STEREO
LOCAL
PICTURE
EXIT
EUROPE
ON
OFF
PRESET
AREA
Note:
* Russian frequency not this item
Press[ ]or [ ] to select AREA, then press ENTER, the setting menu appears as follow:Press [ ] [ ] to select your desired item. You can select EUROPE or USA or FM ONLY to search the stations quickly by your current area.
RADIO MENU
AREA
STEREO
LOCAL
PICTURE
EXIT
EUROPE
ON
OFF
PRESET
STEREO
Press[ ]or [ ] to select STEREO, then press ENTER, the setting menu appears as follow:Press [ ] [ ] to turn STEREO on or off then press ENTER.
RADIO MENU
AREA
STEREO
LOCAL
PICTURE
EXIT
EUROPE
ON
OFF
PRESET
LOCAL
Press[ ]or [ ] to select LOCAL, then press ENTER, the setting menu appears as follow:Press [ ] [ ] to select your desired item.In this menu to search the LOCAL stations, when selected ON, the strong signal localstations can be received, when selected OFF,the week signal out-of-town stations maybe received.
RADIO MENU
AREA
STEREO
LOCAL
PICTURE
EXIT
EUROPE
ON
LOCAL
PRESET
Picture
Press[ ]or[ ] to select PICTURE, then press ENTER, the setting menu appears as follow:Press [ ] [ ] to select your desired item.CAPTURED the captured picture set for the wallpaperPRESET the initial wallpaper
08
39
Before You Start
6
Replacing the Fuse
Make sure the amperage matches the specified value when replacing the fu-ses. If the fuse is blown, check the po-wer connection and replace with a n-ew one. If the same problem occurs, it would be subjected to the malfun-ction. In such cases, please consult to the nearest service dealer.
When the range of the operation of thecard remote control becomes short or no functions while operating. Replace the lithium battery with a new button cell(CR2025). Make sure the battery polarity before replace.
Precautions on Using Lithium Battery
Always keep the lithium battery beyond children s reach. In case swallowed, see a doctor immediately.
Cleaning the battery with a dry cloth, to ensure its perfect connected.
Make sure the proper polarity whenloading with the battery.
To prevent short circuit, do not use metal tweezer to clip the battery.
Gently pull out the Battery Holder whilepressing the Stopper.
Put the button-type battery with mark(+) upward into the Battery Holder.
Replacing the Battery
Insert the Battery Holder into the Remote
Control.
!
Maintenance
WarningNever use the fuse with the rated amperage more than that supplied to your unit, otherwise it will damage the unit.
!
Tuner
WarningImproperhandle with the batter maylead to explosion.It cannot be charged, disassembled or thrown into a fire.
* This function is only operated by using rem- ote control.
Scanning/Memorizing Stations AutomaticallyDuring radio status, you can press AMS button on the remote control to scan each stored station 5 seconds respectively which stored in Number Buttons (from 1 to 6). You can press the corresponding Number Buttons or AMS button when your desired station is charged. And it starts playing that station.
When press and hold AMS , automatically memory storing fun-
ction. The radio automatically selects a station and has it stored in any one of the Number Buttons from 1 to 6.
button it will activate
4
24
Notes:
Number Buttons
During radio mode, Number Buttons from 1 to 6 can help you store yourfavorite station. You can follow the as below:
steps
You can store up to 18 FM stations 6 each for FM1,FM2,FM3),up to 12AM stations (6 each for AM1/MW and AM2/LW).
(
24
When receiving a station, press and holdany one of the Number Buttons until CH i(i=1~6) appears on the LCD, which in-dicates that station is already stored in the corresponding number button.
Note:
Press AMS on the head unit also performsthe same function. The unit can be stored up to 6 stations for each band. Regarding the function of Number Buttons, refer to Number Buttons for more inform- ation.
*
*
*
4
Selecting Station Directly
Press GOTO button, the monitor shows:FR:, input the number to receive the stationof this frequencies.
Note:
2
* This function is only operated by using rem- ote control.
01
7
Before You Start08
38
Location of the Controls
Front Panel
Base
Tuner
FM2
MW2(AM2) MW1(AM1)
FM3FM1
FM2
LW MW
FM3FM1
(For Two Bands)
During radio status, repeatedly press BAND button to select bands in
lowing order: the
fol
Band Selector
Manual/Automatic Tuning
Manual Tuning: Repeatedly pressing ( button on the remote control con-tinuously to select a or
respectively.
or ) station downward
upward
Automatic Tuning: ress buttonseconds, the radio
a station or respectively and plays when it finds a station.
P ( or ) for more than 3 automati-cally searches downward upward
(For Three Bands)
It is set to LOC mode when button is first pressed. LO pears on the display and only local tion is available.
LOC ap
sta
It is switched to DX mode when is pressed again. Both and local stations can be received.
LOCdistance
During radio status, you can press STbutton on the remote control Mono mode or Stereo
to select mode.
DX/LOC Selector
During radio status, press LOC button on the remote control to select or weak station reception.
strong
Notes:
MO/ST Selector
Stereo reception is charged when STappears.
It is switched to MONO mode appears.
whenMO
3
6
Note:
Note: Note:
22
1
1
2
2
* The initial mode is DX mode.
* Press button on the head unit also performs
the same function.
* Press button on the head unit also performs
the same function.
12
Selecting the Station
During radio mode, press to select theupward station, press to select the down-ward station.
Note:
22
* To set STEREO in RADIO MENU also
performs the same function.
* Press LOC on the head unit or set LOCAL
in RADIO MENU also performs the same
function.
22
On-screen display
Briefly press to show the RDS menu, press and hold it to display the
OSD
current source information.
* This function is operated by using remote control.
the
Note:
8
* First press AMS on the head unit , and then
press button on the head unit also performs
the same function.
12
8
5
5
5
10 1613
5
1 3 246
7 8
18
12 17 14
119
15
19
Press this button to turn on the unit, when the unit on, briefly press it to set mode, hold and press it to turn off.
MOD/ button11
Rotate (VOL) button clockwise to incr-ease the volume level; and rotate(VOL) button anticlockwise to decrease the volume level. Briefly press it to set the volume characteristics; press and hold it to show the system menu;rotate it to set the item.
VOL button3
USB Socket5
9
4
To display current status.
LCD (LIQUID CRYSTAL DISPLAY)
7 Infrared Sensor
Press to release the front panel.
2 (REL) button
During radio mode, briefly press it toadjust the storaged stations; press and hold it to memory stations automatically.First press it, then press to select stations.During playback, press it to activate therepeat play function.
AMS button6
/
88
During radio mode, press it to select different bands.During playback, press it to play or pause play, press and hold to stop play.
BND/ (BAND/PAUSE,PLAY button)
07
37
Before You Start
8
IPOD
During IPOD mode, press Root to go back to the root directory.
Back to Root Directory
4
During IPOD mode, press to go back to the previous directory.
Back to the Previous Directory
5
During IPOD mode, press Video to select video or audio. Video and picture canbe played at this time.The unit and the remote control can not beoperated in this mode, you can just operateIPOD to select video and picture.
Video or Picture Mode
6
* This function is operated by using remote control only.
Note:
* The IPOD TV should be set ON in this function.
During IPOD mode, to take IPOD out, the main unit will switch to radio mode.During other mode, to take IPOD out, the main unit will keep the original mode.
Exit IPOD
Note:
Press to select the previous track,press to select the next one, then press ENTER to play.
Tracks Selector
Press GOTO to display : ---, input the numbers to play the desired track.
22
Press to select the previous 5 tracks,press to select the next 5 tracks, then press ENTER to play.
22
2
* Press button on the head unit also performs the same function.
12
/ (Stop/Mode display)
Briefly press it to stop playing; pressand hold it to select the day mode ornight one.
Press to set the unit to initial status.
10 RESET button
13
Press it to eject the disc.
EJECT button
12
During radio mode, press it to selectthe stations; during playback mode,press it to select tracks; during IPODmode press it to select the previous ornext 5 tracks.
button/
Disc Loading Slot16
11
Briefly press it to select the different frequency automatically.
EQ button
A/V In17
14
During radio mode, press it to selectthe distant or local station.
LOC button
15 LOUD(loudness)button
Briefly press it to activate LOUD fun-ction.
Press it to switch the audio between mobile phone and main unit.
MUT button18
19 SD Card Socket
01
9
Before You Start07
36
Card Remote Control
Tips:For more information as to replacing battery, please refer to Replacing the Battery on page 6.
IPOD
IPOD play
During IPOD playback, connect the IPOD wire(5V) to the one in backside of main unit.The unit will play track in IPOD.
During IPOD playback, press to play the previous track, press to play the next track.
* This function is operated by using the remote control only.
Playing the Previous/Next Track
Note:
99
Press or to play the track fast for-ward or fast rewind . Press it again or press ENTER to resume to play normally.
Playing Track F.F/F.REW
20
Note:
* This function is operated by using the remote control only.
Repeat Playing
During playback, press Press it again to
cancel this function.
RPT to trackrepeat, disc repeat, off.
Pressing AMS on the head unit also performs
the same function.
16
Note:
*
Playing Tracks Random Orderin
During IPOD playback, when RDM button, Shuffle off,
pressingShuffle Track,
Shuffle Album will be activated.
17
Note:
* This function is operated by using the remote control only.
Pause the Playback
During playback, press
button to pause the playback, Press it again to return to nor-mal playback.
Pressing on the head unit also performs
the same function.
Note:
* 8
18
On-screen display
* This function is operated by using remote control.
the
Note:
During IPOD playback, hold and press OSD button to display the current source information.
8
06
35
VCD/CD/MP3/MPEG-4/USB/SDBefore You Start
10
PWR (turn on/off) button
GOTO(time,track) button
BAND/TITLE (band selection/ title menu) button
AMS/MENU/Root (preset stations, memory automatically/menu/back to root directory) button
ST/AUDIO/Video (stereo or mono se-lection/language or audio switch/ video or audio switch in IPOD) button
ANGLE (play angle) button
Briefly press it to display the current information; press and hold it to displaythe current setup.
OSD (current display) button
(slow play) button
PROG (program play) button
VOL+/VOL-/SEL (volume adjust/soundcharacteristics setup) button
RPT (repeat play) button
RDM (play at random) button
(Play/pause) button
(F. /F.F) buttonREW/
SETUP (setup) button
(Previous/next track) button/
MODE (mode switch) button
EQ (equalizer) button
ENTER(Left/Right/Up/Down ENTER)
LOUD(loudness) button
0~9 (number) button
CLEAR (clear button)
LOC/ /SUB-T (long distant or localstation in radio mode/ back to last levelin IPOD mode/ subtitle display) button
ZOOM (briefly press it to zoom in or out/ hold and press it to adjust videodisplay screen) button
[P/N]/ (system adjustment/capture) button
(Mute) button
/ (Stop play/ To display mode switch) button
Exit an USB
During USB mode, the main unit would switch to TUNER mode directly when exitthe USB.During other modes, the main unit will keep the previous mode when exit the USB.
Note:
Please fill the rubber installs after exiting USB .
To Capture Picture
During MP3/USB/SD mode, when to scanthe picture, hold and press [P/N]/ bu-tton to capture the current picture, and set it to wallpaper
Note:
* This function is operated by using remote control only.
¼ ò µ ¥¹ Ê Õ ÏÅ Å ³ ýÖ ¸ Ä ÏExit a SD Card
Push SD card to exit it.During SD mode, the main unit would switch to TUNER mode directly when exitthe SD.During other modes, the main unit will keep the previous mode when exit the SD.
01
11
Before You Start
34
06
AM Tuner Section
CD Player Section
522-1620(KHz)
(Europe/Russia)
530-1710 (KHz)(U.S.A.)
450KHz
35dBuV
VCD Signal System PAL/NTSC
60dB
55dB(1KHz)
0.1%
General
FM Tuner Section
87.5-108(MHz)
(Europe)
87.5-107.9(MHz)(U.S.A.)
10.7MHz
10dBuV
60dB
30dB 1KHz
30-15000Hz
Note:
Due to continuous product improvement,
specifications and design are subject to
change without prior notice.
Specifications
Power Requirement 14.4V DC(11-16V allowable)
Load Impedance
10dB
Bass 100Hz
Treble 10KHz
Tone Controls
Approx.192 x 178 x50mm (d/w/h)
Dimensions
Approx.1.75kgWeight
MountingDimensions
Approx.169 X 182X53mm (d/w/h)
Tuning Range
IF Range
Usable Sensitivity
(-30dB)
Signal-to-noise Ratio
Stereo Separation
Frequency Response
Frequency Range
IF Range
Usable Sensitivity
(-20dB)
Signal-to-noise Ratio
Separation
Distortion
DVD Player Section
Number of channel
5Hz to 20,000Hz
98dB
60dB
Frequency Response
Dynamic Range
Signal-to-Noise Ratio
2 channels
Less than measurable limit
Wow and Flutter
65-74(MHz)Russia)
Max.Power Output 80W X 4
(Optional )
(Optional )
VCD/CD/MP3/MPEG-4/USB/SD
Number ButtonsDuring playback, you any track directly by ( 0~9). The selected track will be played automati-cally.
can select using Number Buttons
* This function is operated by using remote control only.
Note:
24
MO/ST Selector
During VCD playing, repeatedly press AUDIO button to select the mode as bellow:
This function is operated by using the remote control.
Mono left Mono right Stereo
6
Note:
*
Program Playing
During VCD/CD mode, press PROG, the TFT displays the program menu. Pressing NUMBER BUTTONS to select the trackNumber and then press to move the cursorto START, press ENTER to start program playing; move the cursor to EXIT and pressENTER to exit the program playing. Movethe cursor to and press ENTER to the previous page; move the cursor to and press ENTER to the next page.During this process, press or PROGto cancel the program playing.
13
The function is only valid on remote control.
Note:
*
22
Playing PBC (Menu)
During VCD status, first pressing TITLE, PBC playback starts and the menu of entire disc appears on the monitor. And then you can select your favorite track by using Number Buttons. When a track is playing, you can button to return to
if you would like to end the track and select others. To cancel PBC playing, press button again.
press MENU the menu
TITLE
24
3
This function is operated by using the remote
control.
Note:
*
PBC playing confirms to version 2.0 of SVCD/
VCD disc only.*
3
* This function is operated by using remote control only.
Note:
During CD playback, first press GOTO, and TFT shows : disc go to:--:--,press your desired time of the playback by using num-ber buttons. Secondly press GOTO button, track go to:--:-- appears on TFT, also input your desired numbers to play the current time of your selection.
Setting the Playback Time
2
During VCD mode, press GOTO buttonto set the playing time, when the TFT dis-play :
. Press [ ][ ] to select the options, press ENTER to set the status.Then press NUMBER BUTTONS or [ ][ ] to setthe current status.
track/disc time/track time/repeat/time disp
24
2
During MP3/USB/SD mode, press GOTO first to display : ---/all track, input thenumbers to play the desired track. Presssecond : to adjust the playing time.--:--
2
During MPEG-4 mode, press GOTO first to display : select:---, input the numbers to play the desired track. Press seco-ndly : to adjust the playing time.
GOTO time-:--:--
2
19
4
06
33
Installation
12
02 VCD/CD/MP3/MPEG-4/USB/SD
Wiring Connection
1 Front RCA
Antenna 3
2 Rear RCA
Video Out 4
75
6
2
3
4L white
R red
L white
1 Front RCA
Rear RCA Light Grey
Dark GreyVideo Out
YellowGrey
Antenna Black
Output Plug (Male)5
Output Socket (Female)6
7
Subwoofer Brown Brown
Subwoofer 8
R red
Rear RSpeaker
Front RSpeaker
Reverse Gear
Parking Brake
Ignition Key
Rear LSpeaker
Front LSpeaker
Ground
Yellow
Red
Blue
Green/Black
Green
White/Black
White
Violet/Black
Violet
Grey/Black
Grey
Black
FILTER&FUSE
BOX
8
Brown
Orange
Reversing Video In Brown 7
Reversing Video In
Yellow
Battery +
Antenna Power +
9 IPOD link wire White +5V
YellowBlack Black AUX In 10
Video In11L white
R red
Yellow
IPOD link wire9
AUX In (Optional)10
Video In (Optional)11
(Optional)(Optional)
2X 3X 4X
No Change
Slow motion playback
During VCD mode, press to slow forward or slow backward. There are such speeds each pressing decreases the speed until the minimum speed is reached.
* This function is operated by using remote
control.
the
11
Note:
During VCD/MPEG-4 mode, press ZOOM to increase the picture in size. There are such sizes as following:
* This function is operated by using remote control.
the
Picture Sizes
10
Note:
* To perform this function with the button.22
On-screen display
During VCD/CD playback, briefly press OSD, the monitor shows:
* This function is operated by using remote control.
the
Note:
8
Single elapsed time
Total elapsed time
Total remain time
Single remain time
OFF
Eject a Disc
First press , then press button to eject a disc.
* This function only be operated by the head
unit.
can
Notes:
2 13
File Selector
During MP3/MPEG-4/USB/SD stop mode,press to select file or file document. Press ENTER to open it.
22
Note:
This function is operated by using remote
control.
the*
AUDIO 1 AUDIO 2 AUDIO 3......
Changing audio language (Multi-audio)
MPEG-4 can provide audio playback with different language. With discs featuring multi-audio recordings,repeatedly pressAUDIO to switch between language and audio systems during playback.
Selection options switch as follows:
* This function is operated by using remote control.
the
* This function only operates with MPEG-4
featuring multi-audio recordings.
* The number in the mark on a MPEG-4
package indicates the number of recorded
languages/audio systems.
2
Note:
6
Press and hold this button to display the current source information.
Single elapsed time
Single remain time
OFF
During MPGE-4 playback, briefly press OSD, the monitor shows:
8
Pause the Playback
During playback, press
button to pause the playback, Press it again to return to nor-mal playback.
Note:
18
* Briefly press button on the head unit also performs the same function.
8
02
13
Installation
32
06
Install the Front Panel
Put notch (Shown as picture)
shaft . And then press into the
right side.
onto
slightly
A
B
Note:
Never put any objects into the panel. front
2Press button in the upper
corner, and then the front panel will be
folded down.
right (REL) (REL)
When the front panel was turned down
to a position of 45 , hold and slide the
front panel to left, pull it out . and then
VCD/CD/MP3/MPEG-4/USB/SD
A
B
REL
System Button
During VCD playback, press P/N button to select standard TV system as following:
Note:
12
* This function can be operated by selectiong the DVD MENU SETUP.
AUTO NTSC
PAL
Repeat Playing
During playback , press replay the current track. Press it again to cancelthis function.
RPT to
Pressing AMS on the head unit also performs
the same function.
16
Note:
*
Playing Tracks Random Orderin
During VCD/CD/MP3/MPEG-4/SD play-back, when RDM button , the unit plays random under the direct-ory which you select. Preturn to
press any track at
ress RDM again to normally play.
17
The default setting is Disc Repeat.*
During MP3/USB/MPEG-4/SD playback, press to play the previous track, press to play the next track.
* Briefly press button on the head unit also the same function.performs
Playing the Previous/Next Track
12
Note:
Press or to play the track fast forward or fast rewind: Each pressing, will change as following:
Playing Track F.F/F.REW
20
Note:
2X
Stop the playback
During MP3/MPEG-4/USB/SD mode, press to stop playing, press it again to returnto the beginning of the current track.
During VCD/CD playback, first pressto return to the beginning of the current track, press again within 3 seconds to play previous track, press to play next track.
9
4X 8X 16X
Note:
During VCD/CD mode, first pressing to pause playing, press to play, press button twice to stop playing completely, press PLAY button to start playing.
Playing Discs/USB/SD
While playing discs, just insert a disc (with labeled side up) into (Disc Loading Slot) (Shown as picture), t mechanism will automatically on. If a disc is loaded, briefly press MODE button start the playing.
the he
switch to
When playing USB, first unstop the rubber plug, then insert USB in USB socket, the mechanism will automatically play. When playing SD Card, first press REL to release the front panel, then insert a SD card into the slot, the programs in the card will be played.
Pressing MOD on the head unit also performs the same function.
Note:
9
Note:
* This function is operated by using the remote control only.
9
* Press and hold button on the head unit also performs the same function.
12
9
9
2
19
19
18
* Press and hold button on the head unit also performs the same function.
8
9
05
31
DVDInstallation02
14
Installation Method DIN Front-Mount11
Bend these clawsoutward for a tight fit, if necessary.
To support the unitFire Wall
Installation Method 2
Installation using the screw holes at
sides of the unit.
the
1. Remove the hooks on both sides.
2. Select a position where the screw holes of the mounting bracket supplied with the car and the holes of the main unit (are fitted), and
screws (see at 2 places on each side. And then fasten them to the car.
screwbecome aligned
tighten the 4
Outer Trim Frame Hook Mounting Sleeve are not used
andfor installa-
tion method
51
9
2
NOTE:
Bracket supplied to your carBracket supplied to your car
HookHook
Dashboard or ConsoleDashboard or Console
---Preferences page--
Default Example showing how to set load factory setting:
(Press , or , then press ENTER)(Press
--Preference Page--
Go To Preference Page Load Factory Setting
TV Type
Audio Subtitle Disc MenuParental
Password Default
Auto Eng
Eng
Eng
--Preference Page--
TV TypeAudio Subtitle Disc MenuParental
Password Default
Auto Eng
Eng
Eng
Reset
02
15
InstallationDVD
30
05
£p £p
Detach the Unit
1.Take out the Outer Trim Frame afterdetaching the front panel.
Detach the front panel before disassembl-ing the unit. F
efer to the Front Panel .
or more details regarding this section, r Detach
2.Insert the keys supplied to the unit atboth sides of the unit (shown as illustrat-ed) until they click. Pulling the keys makes it possible to remove the unit from the dashboard.
Main Parts List
Mounting Sleeve x1 Rear Mounting Bolt x1 4 Screws
M 5 x 5
Harness Rubber x1
Keys x 2Outer Trim Frame x 1 Connecting Wire x1 Steel Bar x 1
---Preferences page--
Disc Menu Example showing how to set Disc Menu Language:
(Press , or , then press ENTER)(Press
--Preference Page--
Go To Preference Page Preferred Menu Language
TV Type
Audio Subtitle Disc MenuParental
Password Default
Auto Eng
Eng
Eng
--Preference Page--
TV TypeAudio Subtitle Disc MenuParental
Password Default
Auto Eng
Eng
Eng
Parental Example showing how to set parental control:
(Press , or , then press ENTER)(Press
--Preference Page--
Go To Preference Page Set Parental Control
TV Type
Audio Subtitle Disc MenuParental
Password Default
Auto Eng
Eng
Eng
--Preference Page--
TV TypeAudio Subtitle Disc MenuParental
Password Default
Auto Eng
Eng
Eng
Password Example showing how to set password, and the default password is 8888.
(Press , or , then press ENTER)(Press
--Preference Page--
Go To Preference Page Change Password
TV Type
Audio Subtitle Disc MenuParental
Password Default
Auto Eng
Eng
Eng
--Preference Page--
TV TypeAudio Subtitle Disc MenuParental
Password Default
Auto Eng
Eng
Eng
Change
2 3 4 5 6 7 8 Off
GPGPG 13PGRRNC 17Adult
English
French
Spanish
Chinese Japanese
Russian
Korean
Others
05
29
DVDInstallation
16
02
Cleaning the Connector
If the connector between the main unit and the
front panel is dirty, it may result in unit s ab-
normal working condition. To avoid such pro-
blems happening, please detach the front panel,
and clean the connector with an swab.
Gently clean and avoid damaging the connector.
alcohol
* For safekeeping, always shut down the generator
and take out the key ignition before cle-
aning.
Never keep your finger or any metal touch
the connector directly.
from the
device
Notes:
The main unit
The backside of the front panel
---Preference page---
TV Type Example showing how to set TV type:
(Press , or , then press ENTER)(Press
--Preference Page--
Go To Preference Page Set TV Standard
TV Type
Audio Subtitle Disc MenuParental
Password Default
Auto Eng
Eng
Eng
--Preference Page--
TV TypeAudio Subtitle Disc MenuParental
Password Default
Auto Eng
Eng
Eng
PAL
Auto
Audio Example showing how to set Audio language:
(Press , or , then press ENTER)(Press
--Preference Page--
Go To Preference Page Preferred Audio Language
TV Type
Audio Subtitle Disc MenuParental
Password Default
Auto Eng
Eng
Eng
--Preference Page--
TV TypeAudio Subtitle Disc MenuParental
Password Default
Auto Eng
Eng
Eng
Subtitle Example showing how to set subtitle language:
(Press , or , then press ENTER)(Press
--Preference Page--
Go To Preference Page Preferred subtitle Language
TV Type
Audio Subtitle Disc MenuParental
Password Default
Auto Eng
Eng
Eng
--Preference Page--
TV TypeAudio Subtitle Disc MenuParental
Password Default
Auto Eng
Eng
Eng
NTSC
English
French
Spanish
Chinese Japanese
Russian
Others
Korean
English
French
Spanish
Chinese Japanese
Russian
Korean
Others
Common OperationsDVD 03
1728
05
Reset the Unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit.
Setting the Sound Characteristics
Press VOL+ button to increase sou- nd level and press VOL- button to decr- ease sound level.
the
the
Repeated pressing SEL button to select the mode in the following order:desired
Volume Control
* Rotating VOL on the head unit also performs the same function.
* Pressing SEL and rotating VOL button on the unit or set AUDIO SETUP in MAIN MENU also performs the same function.
head
Note: * When ome errors occur on the
also press RESET it will
s display, you can button to resume to normal,
and erase the clock setting and some me- morized functions. * This function can only be operated by the head unit.
Release the front panel at first, and thenPress RESET button on the base w
object, (such as a ballthe unit to initial status.
ith a pointed point pen) to set
10
Turning the Unit On/Off
Press PWR button to turn on the unit, press it again, the unit is still in waiting status. When insert a disc, unit will au-tomatically start playing. Keep pressing it to turn off the unit completely.
the the
1
* During waiting status, briefly press PWR on the head unit to turn on the unit, press and hold it to turn off the unit.
Note:
15
15
Note:
15
1 After selecting the desired mode, you
adjust the current level by pressing .
can VOL buttons15
,2 If you don t adjust VOL buttons
in 3 seconds after selecting the desired
mode, the unit will automatically return
to the current mode being displayed.
wi-
th
15
Note:
VOL
TRE
BAS FAD BAL
EQ Setting While listening to the popular music, classic music or rock music, you can select the co-rresponding preset modes to adjust the sound quality perfectly by using EQ button. Repeatedly pressing to choose the following modes in turn:
EQ button
* Press and hold EQ on the unit also performs the same function.
head
27
Note:
27
ROCKCLASPOP
FLAT
--Dolby Digital Setup--
Dual Mono Example showing how to set stereo mode:
(Press (Press , or , then press ENTER)
--Dolby Digital Setup--
Dual MonoDynamic
Go To Dolby Digital Setup
Dual MonoDynamic
Dual Mono (1+1) Setup
Stereo L-Mono
--Dolby Digital Setup--
R-MonoMix-Mono
Dynamic Example showing how to set dynamic range compression:
(Press (Press , or , then press ENTER)
--Dolby Digital Setup--
Dual MonoDynamic
Go To Dolby Digital Setup
Dynamic
Set DRC off
--Dolby Digital Setup--
1 4
1 2
3 4
Dual Mono
Common Operations03
18
05
27
DVD
¼ ò µ ¥¹ Ê Õ ÏÅ Å ³ ýÖ ¸ Ä ÏNight Mode
Hold and press button to enter the night mode, press it again to switch to the normal mode. During night mode, to turn off the blue screen and weeken the button light.
Note:
* This function is operated by using the remote control only.
19
Receptor on the head unit for the card remote commander.
7
Display Mode
During video playback, press and hold ZOOM button to select 4:3 display mode,press and hold it again to display the previousone.
* To set this function by WIDE in MAIN MENU.
Infrared Sensor:
Note:
10
You can input the audio or video frequency into the main unit to increase the volume through A/V In.
A/V In
Mode Selector
Press MODE button to select the different modes available.
* Briefly press MOD on the head unit also performs the same function.
Note:
25
Press REL to release the front panel.
Release the front panel
2
Note:
* This function is operated by the head unit only.
Press button to shut off sound output and . Press it again to resume to previous volume level.
the appears
Mute Function
Note:
14
Force Disc Out
During playback, when a disc was locked or can not eject, press MODE on the head unitto switch to the radio mode then hold and press the button 3 seconds,that disc can be forced out.
* Press MUT on the head unit performs the same function.
Press CLEAR to clear the mistake input.
CLEAR
Note:
* This function is operated by using the remote control only.
23
¼ ò µ ¥¹ Ê Õ ÏÅ Å ³ ýÖ ¸ Ä ÏTurning Loudness On/Off
Witheout bluetooth, briefly press LOUDactivate LOUD
function. You can this button to incr-ease the low qucan improve sensi ty for ears. And LOUD ON pears. Press it gain to down this function, and .
on the remote control to press
fre tiviyour ap
a shut LOUD OFF appears
26
Note:
* Without bluetooth, briefly press LOUD on the head unit or set LOUDNESS in MAIN MENU also performs the same function.
--General Setup Page--
Captions Example showing how to set captions on/off:
(Press (Press , or , then press ENTER)
--General Setup Page--
TV DisplayAngle Mark
OSD LangCaptions
Screen Saver
Wide On
Eng Off On
Go To General Setup Page
--General Setup Page--
TV DisplayAngle Mark
OSD LangCaptions
Wide On
Eng Off
Screen Saver On
Closed Captions
Off On
Logo Type Def
Screen Saver Example showing how to set Screen Saver on/off:
(Press (Press , or , then press ENTER)
--General Setup Page--
TV DisplayAngle Mark
OSD LangCaptions
Screen Saver
Wide On
Eng Off On
Go To General Setup Page
--General Setup Page--
TV DisplayAngle Mark
OSD LangCaptions
Screen Saver
Wide On
Eng Off On
Screen Saver
On Off Logo Type Def
Logo Type Example showing how to set Logo Type:
(Press (Press , or , then press ENTER)
--General Setup Page--
TV DisplayAngle Mark
OSD LangCaptions
Screen Saver
Wide On
Eng Off On
Go To General Setup Page
--General Setup Page--
TV DisplayAngle Mark
OSD LangCaptions
Screen Saver
Wide On
Eng Off On
Logo Type
Default Captured
Logo Type Def Logo Type Def
Logo Type Def
Logo Type Def
DVD05
26
04
19
Set up Main Menu
Press and hold SETUP on the remote controlor MENU on the head unit , the setting pic-ture appears as follow:
* Buttons of ENTER are on the remote control.
[ ] [ ] [ ] [ ]/
1.Audio Adjust
After Selecting AUDIO, press ENTER to enter the setting system:
The main menu includes 5 selections above, press or button to select the requisite it-em, then hit ENTER to set it; press orbutton to reach EXIT, press ENTER to exit setting.
Note:
You can adjust BALANCE, FAD, BASSTREBLE, EQUALIZER,LOUDNESS, press [ ] or BACK then press ENTER to go back to the previous menu.For example, press [ ] [ ] to select BASS, the setting menu will appear as follow:
Press to increase or decrease the size, and then press ENTER. Press [ ] togo back to the previous menu.
[ ] [ ]
* Adjusting the other items perform the same operation.
Note:
Main Menu
* Rotate and press VOL button on the head unit performs the same function.
MAIN MENU
AUDIO
SOURCE SEL
PREFERENCE
EXIT
VIDEO
BALANCE FAD
BASS TREBLE
AUDIO SETUP
EQUALIZER
BACKLOUDNESS
000000
FLATOFF
00
BALANCE FAD
BASS
TREBLE
AUDIO SETUP
EQUALIZER
BACKLOUDNESS
000000
FLATOFF
00
Example showing how to set picture mode:
(Press (Press , or , then press ENTER)
Captions OSD Lang
OSD Lang
Angle MarkTV Display
--General Setup Page--
(Press , or , then press ENTER)(Press
Example showing how to set TV Display mode:TV Display
--General Setup Page--
--General Setup Page--
TV Display
Example showing how to set language mode:
(Press (Press , or , then press ENTER)
Screen Saver
Captions
TV DisplayAngle Mark
OSD Lang
On
Eng Off On
Set OSD Language
English
Angle Mark
OSD LangCaptions
Screen Saver
Wide On
Eng Off On
Logo Type Def
TV Display
Captions
Screen Saver
Wide On
Eng Off On
Def Logo Type
Normal/PSNormal/LB
Wide
--General Setup Page--
Angle Mark
TV DisplayAngle Mark
OSD LangCaptions
Screen Saver
Wide On
Eng Off On
Logo Type Def
--General Setup Page--
Angle Mark
Screen Saver
Wide On
Eng Off On
Logo Type Def
--General Setup Page--
TV Display
OSD LangCaptions
On Off
OSD Lang
TV Display Wide Angle Mark On
OSD Lang Eng Captions Off Screen Saver On Logo Type Def
--General Setup Page-- --General Setup Page--
Wide TV Display
Logo Type Def
Go To General Setup Page Set TV Display mode
Go To General Setup Page Set Angle Mark
Go To General Setup Page
English
Set OSD Language
Logo Type Def
Angle Mark On
OSD Lang Eng Captions Off Screen Saver On
04
20
05
25
DVDMain Menu
Selecting Different Menu/Title
Under DVD playback mode, press MENUor TITLE to return to the root menu orthe title menu, the monitor display all the chapters or all titles. You can press and Number Buttons on the remote co-ntrol to select different chapter or title.
* This function is operated by using remote control.
the
22
Note:
Changing audio language (Multi-audio)
DVDs can provide audio playback with different language. With DVDs featuring multi-audio recordings, you can pressAUDIO to switch between language and audio systems during playback.
AUDIO 1 AUDIO 2 AUDIO 3......
Selection options switch as follows:
* This function is operated by using remote control.
the
* This function only operates with DVDs fea-
turing multi-audio recordings.
* The number in the mark on a DVD's
package indicates the number of recorded
languages/audio systems.
2
Note:
6
Changing the subtitle language (Multi-subtitle)
With DVDs featuring multi-subtitle recor-dings. You can press SUB-T to switch between subtitle languages during playback.
Subtitles 1 Subtitles 2 Subtitles OFF
Selection options switch as follows:
* This function is operated by using remote control.
the
* This function only operates with DVDs fea-
turing multi-subtitle recordings.
* The number in the mark on a DVD's
package indicates the number of recorded
subtitle languages.
2
Note:
5
24
3
SET UP MENU
During DVD playback, press SETUP , the screen will display system setting pic-ture, the user can select some relative con-stant parameters. The user also can set it asneeded by moving he cursor and using [ ][ ][ ][ ] buttons, and then press ENTER to
t
execute the selecting or enter-ing item.
* The selections are the preferred options that will be chosen if they are available on a disc. If the disc that is inserted does not have the preferred option then the discs own pre- ference will be used.
Note:
21
22
22
* Some functions varies depending on the types of models or formats of the disc.
* Regarding SETUP MENU, please refer to the following pages for more details.
4
Press [ ][ ][ ] to move the cursor onX then press ENTER to exit the menu
setup.
......
2.Video Adjust
Selecting VIDEO in main menu, press ENTER to enter setting system.
The main menu includes items above.Press or BACK and then press ENTERto go back to the previous menu.
Image Adjust
Adjusting the CONTRAST : press[ ]or [ ] to select CONTRAST, then press ENTER, the setting menu appears as follow:
Press to increase or decrease the size, and then press ENTER. Press [ ] togo back to the previous menu.
[ ] [ ]
Adjusting the other items perform the same operation.
EQUALIZER
Press[ ]or [ ] to select EQUALIZER, then press ENTER, the setting menu appears as follow:
Press to select your desired item, then press ENTER, press to go back to the previous menu.
[ ] [ ]
LOUDNESS
Press[ ]or [ ] to select LOUDNESS, then press ENTER, the setting menu appears as follow:
Press to select your desired item, then press ENTER, press to go back to the previous menu.
[ ] [ ]
VIDEO SETUP
BRIGHT
CONTRAST COLOR
HUE
BACK
DEFAULT
WIDE
30
3030
30WIDE
STANDARD
VIDEO SETUP
BRIGHT
CONTRAST COLOR
HUE
BACK
DEFAULT
WIDE
30
3030
30WIDE
STANDARD
BALANCE FAD
BASS TREBLE
AUDIO SETUP
EQUALIZER
BACKLOUDNESS
000000
FLATOFF
00
BALANCE FAD
BASS TREBLE
AUDIO SETUP
EQUALIZER
BACKLOUDNESS
000000
FLATOFF
00
05
24
04
21
Main MenuDVD
On-screen display
During DVD playback, briefly press OSD, the monitor shows:
* This function is operated by using remote control.
the
Note:
8 ANGLE 1 ANGLE 2 ANGLE 3 ......
Changing the viewing angle (Multi-angle)
With DVDs featuring multi-angle (scenes shot from multiple angles) recordings, you can press ANGLE to switch among viewing angles during playback.
Selection options switch as follows:
7
Repeat Playing
Repeatedly repeatedly press RPT on the remote control to replay as following:
* Press AMS on the head unit also performs the same function.
* The default setting is DISC REPEAT.
Note:
16
Number Buttons
press Number Buttons to input thedesired tracks, then it will be played auto-matically.
Note:
24
* This function is operated by using remote control.
the
Chapter Title
Off
Title elapsed time
Chapter elapsed time
Chapter remain time
Title remain time
OFF
* This function is operated by using remote control.
the
Note:
* This function is operated by using remote control.
the
Note:
3
* This function is only operated by DVD with multi-angle recordings.
* This mark on a DVD package indicates it features multi-angles scenes, The number in the mark indicates the number of angles from which scenes were slot.
3
* If you press ANGLE during fast forward/fast reverse or pause, fast forward/fast reverse or pause is canceled and normal playback resumes but the viewing angle does not change.
Press and hold this button to display the current source information.
Setting the Playing Time
During DVD mode, press GOTO buttonto set the playing time, when the TFT dis-play : /chapter/audio/subtitle/angle/title time/chapter time/repeat /time disp. Press [ ][ ] to select the options, press ENTER to set the status.Then press NU-MBER BUTTONS or [ ][ ] to set the current status.
title
22
22
24
2
WIDE
Press[ ]or [ ] to select WIDE, then press ENTER, the setting menu appears as follow:
Press to select your desired item, then press ENTER, press to go back to the previous menu.
[ ] [ ]
VIDEO SETUP
BRIGHT
CONTRAST
COLOR
HUE
BACK
DEFAULT
WIDE
30
30
30
30
WIDE
STANDARD
Default
Adjusting the DEFAULT : press[ ]or [ ] to select DEFAULT, then press ENTER, the setting menu appears as follow:
The main menu includes selections above,after selecting any one of them, DEFAULTwill switch to USER. press or button to adjust item, then pressENTER.Press to go back to the previous menu.
3.Source Setup
Selecting SOURCE SEL by pressing in main menu, press ENTER to enter setting system.
This menu can set up the above items by pressing [ ] and [ ] and ENTER.If you set one of them OFF, the function is invalid. For example, if one item set OFFpressing SOURCE button can not activateit. During playback mode, you can not set it OFF.
VIDEO SETUP
BRIGHT
CONTRAST COLOR
HUE
BACK
DEFAULT
WIDE
30
3030
30WIDE
STANDARD
SOURCE SEL
RADIO
USB
SD
DISC
IPOD
ON
AV-R
AV-F
BACK
ON
ON
ON
ON
ON
ON
4.PREFERENCE SETUP
Select PREFERENCE, then press ENTER.
This menu can set up the above items by pressing [ ] and [ ] and ENTER.Press or BACK, then press ENTER to go back to the previous menu.
Clock System
Setting CLOCK SYSTEM in this menu,according to the desired setting 12 HOUR or 24 HOUR.Press [ ] and [ ] and ENTER.Press to go back to the previous menu.
Clock Adjust
KEY BEEP
Setting CLOCK ADJ in this menu,Press [ ] and [ ] and ENTER.Press to goback to the previous menu.
Setting KEY BEEP ON or OFF in this menu,the default setting is ON. Press [ ] and [ ] and ENTER.Press to go back to the previous menu.
Main Menu04
22
05
23
DVD
REVERSE POLA
Setting reverse pola in this menu, The signalis +12V when you back a car, please setBATTERY; if the signal is 0V, please setGROUND.Press [ ] and [ ] and ENTER.Press to go back to the previous menu.
CLOCK SYS
CLOCK AD J
PREFERENCE
KEY BEEP
REV POLA
BACK
24 HOUR
00:00:00
ON
BATTERY
CLOCK SYS
CLOCK AD J
PREFERENCE
KEY BEEP
REV POLA
BACK
24 HOUR
00:00:00
ON
BATTERY
CLOCK SYS
CLOCK AD J
PREFERENCE
KEY BEEP
REV POLA
BACK
24 HOUR
00:00:00
ON
BATTERY
CLOCK SYS
CLOCK AD J
PREFERENCE
KEY BEEP
REV POLA
BACK
24 HOUR
00:00:00
ON
BATTERY
CLOCK SYS
CLOCK AD J
PREFERENCE
KEY BEEP
REV POLA
BACK
24 HOUR
00:00:00
ON
BATTERY
Basic operation of DVD
Insert a DVD disc into the slot,the unit will automatically switch on, if a DVD disc is loaded, press MODE on the remote control to switch to DVD mode to start the playback.
* Pressing MOD button on the head unit also performs the same function.
25
Note:
During DVD playback, first press to return to the beginning of the current track,press again within 3 seconds to playprevious track, press to play next track.
* Briefly pressing button on the head unit also the same function.performs
Stop the playback
Playing the Previous/Next Track
12
9
Note:
19
Note:
Press or to play the track fast forward or fast rewind: Each pressing will change as following:
Playing Track F.F/F.REW
20
Note:
2X 4X 8X 16X
During DVD mode, first pressing to pause playing, press to play, press button twice to stop playing completely, press PLAY button to start playing.
18
System Button
During DVD playback, press P/N button to select standard TV system as following:
Note:
12
* This function can be operated by selecting the DVD MENU SETUP.
AUTO NTSC
PAL
9
* Press and hold button on the head unit also performs the same function.
12
9
* Press and hold button on the head unit also performs the same function.
8
Pause the playback
Note:
During DVD mode, press to switch pause and play mode, during stop mode, press it again to resume to the playback mode.
18
* Briefly press button on the head unit also performs the same function.
8
Briefly press ZOOM to increase the picture in size. There are such sizes as following:
* This function is operated by using remote control.
the
Increase the size of the picture
10
Note:
2X 3X 4X
No Change
* To remove the image by pressing button.22
Press and hold it to display NORMAL(4:3),WIDE(16:9).
Slow motion playback
Press to slow forward or slow back-ward. There are such speeds each pressing decreases the speed until the minimum speed is reached.
* This function is operated by using remote
control only.
the
11
Note: